blob: 122a0f8495c85900e20f4cdbedd637f9252613d7 [file] [log] [blame]
Ben Dooks5fc404e2007-02-20 13:58:21 -08001/* linux/drivers/video/sm501fb.c
2 *
3 * Copyright (c) 2006 Simtec Electronics
4 * Vincent Sanders <vince@simtec.co.uk>
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 *
11 * Framebuffer driver for the Silicon Motion SM501
12 */
13
14#include <linux/module.h>
15#include <linux/kernel.h>
16#include <linux/errno.h>
17#include <linux/string.h>
18#include <linux/mm.h>
19#include <linux/tty.h>
20#include <linux/slab.h>
21#include <linux/delay.h>
22#include <linux/fb.h>
23#include <linux/init.h>
24#include <linux/vmalloc.h>
25#include <linux/dma-mapping.h>
26#include <linux/interrupt.h>
27#include <linux/workqueue.h>
28#include <linux/wait.h>
29#include <linux/platform_device.h>
30#include <linux/clk.h>
Ben Dooksf22e5212007-10-16 01:28:38 -070031#include <linux/console.h>
Ben Dooks5fc404e2007-02-20 13:58:21 -080032
33#include <asm/io.h>
34#include <asm/uaccess.h>
35#include <asm/div64.h>
36
37#ifdef CONFIG_PM
38#include <linux/pm.h>
39#endif
40
41#include <linux/sm501.h>
42#include <linux/sm501-regs.h>
43
44#define NR_PALETTE 256
45
46enum sm501_controller {
47 HEAD_CRT = 0,
48 HEAD_PANEL = 1,
49};
50
Joe Perches44363f12008-02-03 17:31:49 +020051/* SM501 memory address */
Ben Dooks5fc404e2007-02-20 13:58:21 -080052struct sm501_mem {
53 unsigned long size;
54 unsigned long sm_addr;
55 void __iomem *k_addr;
56};
57
58/* private data that is shared between all frambuffers* */
59struct sm501fb_info {
60 struct device *dev;
61 struct fb_info *fb[2]; /* fb info for both heads */
62 struct resource *fbmem_res; /* framebuffer resource */
63 struct resource *regs_res; /* registers resource */
64 struct sm501_platdata_fb *pdata; /* our platform data */
65
Ben Dooksc1f303b2007-10-16 01:28:37 -070066 unsigned long pm_crt_ctrl; /* pm: crt ctrl save */
67
Ben Dooks5fc404e2007-02-20 13:58:21 -080068 int irq;
69 int swap_endian; /* set to swap rgb=>bgr */
70 void __iomem *regs; /* remapped registers */
71 void __iomem *fbmem; /* remapped framebuffer */
72 size_t fbmem_len; /* length of remapped region */
73};
74
75/* per-framebuffer private data */
76struct sm501fb_par {
77 u32 pseudo_palette[16];
78
79 enum sm501_controller head;
80 struct sm501_mem cursor;
81 struct sm501_mem screen;
82 struct fb_ops ops;
83
84 void *store_fb;
85 void *store_cursor;
86 void __iomem *cursor_regs;
87 struct sm501fb_info *info;
88};
89
90/* Helper functions */
91
92static inline int h_total(struct fb_var_screeninfo *var)
93{
94 return var->xres + var->left_margin +
95 var->right_margin + var->hsync_len;
96}
97
98static inline int v_total(struct fb_var_screeninfo *var)
99{
100 return var->yres + var->upper_margin +
101 var->lower_margin + var->vsync_len;
102}
103
104/* sm501fb_sync_regs()
105 *
106 * This call is mainly for PCI bus systems where we need to
107 * ensure that any writes to the bus are completed before the
108 * next phase, or after completing a function.
109*/
110
111static inline void sm501fb_sync_regs(struct sm501fb_info *info)
112{
113 readl(info->regs);
114}
115
116/* sm501_alloc_mem
117 *
118 * This is an attempt to lay out memory for the two framebuffers and
119 * everything else
120 *
121 * |fbmem_res->start fbmem_res->end|
122 * | |
123 * |fb[0].fix.smem_start | |fb[1].fix.smem_start | 2K |
124 * |-> fb[0].fix.smem_len <-| spare |-> fb[1].fix.smem_len <-|-> cursors <-|
125 *
126 * The "spare" space is for the 2d engine data
127 * the fixed is space for the cursors (2x1Kbyte)
128 *
129 * we need to allocate memory for the 2D acceleration engine
130 * command list and the data for the engine to deal with.
131 *
132 * - all allocations must be 128bit aligned
133 * - cursors are 64x64x2 bits (1Kbyte)
134 *
135 */
136
137#define SM501_MEMF_CURSOR (1)
138#define SM501_MEMF_PANEL (2)
139#define SM501_MEMF_CRT (4)
140#define SM501_MEMF_ACCEL (8)
141
Adrian Bunk9540f752007-02-28 20:11:06 -0800142static int sm501_alloc_mem(struct sm501fb_info *inf, struct sm501_mem *mem,
143 unsigned int why, size_t size)
Ben Dooks5fc404e2007-02-20 13:58:21 -0800144{
145 unsigned int ptr = 0;
146
147 switch (why) {
148 case SM501_MEMF_CURSOR:
149 ptr = inf->fbmem_len - size;
150 inf->fbmem_len = ptr;
151 break;
152
153 case SM501_MEMF_PANEL:
154 ptr = inf->fbmem_len - size;
155 if (ptr < inf->fb[0]->fix.smem_len)
156 return -ENOMEM;
157
158 break;
159
160 case SM501_MEMF_CRT:
161 ptr = 0;
162 break;
163
164 case SM501_MEMF_ACCEL:
165 ptr = inf->fb[0]->fix.smem_len;
166
167 if ((ptr + size) >
168 (inf->fb[1]->fix.smem_start - inf->fbmem_res->start))
169 return -ENOMEM;
170 break;
171
172 default:
173 return -EINVAL;
174 }
175
176 mem->size = size;
177 mem->sm_addr = ptr;
178 mem->k_addr = inf->fbmem + ptr;
179
180 dev_dbg(inf->dev, "%s: result %08lx, %p - %u, %zd\n",
181 __func__, mem->sm_addr, mem->k_addr, why, size);
182
183 return 0;
184}
185
186/* sm501fb_ps_to_hz
187 *
188 * Converts a period in picoseconds to Hz.
189 *
190 * Note, we try to keep this in Hz to minimise rounding with
191 * the limited PLL settings on the SM501.
192*/
193
194static unsigned long sm501fb_ps_to_hz(unsigned long psvalue)
195{
196 unsigned long long numerator=1000000000000ULL;
197
198 /* 10^12 / picosecond period gives frequency in Hz */
199 do_div(numerator, psvalue);
200 return (unsigned long)numerator;
201}
202
203/* sm501fb_hz_to_ps is identical to the oposite transform */
204
205#define sm501fb_hz_to_ps(x) sm501fb_ps_to_hz(x)
206
207/* sm501fb_setup_gamma
208 *
209 * Programs a linear 1.0 gamma ramp in case the gamma
210 * correction is enabled without programming anything else.
211*/
212
213static void sm501fb_setup_gamma(struct sm501fb_info *fbi,
214 unsigned long palette)
215{
216 unsigned long value = 0;
217 int offset;
218
219 /* set gamma values */
220 for (offset = 0; offset < 256 * 4; offset += 4) {
221 writel(value, fbi->regs + palette + offset);
222 value += 0x010101; /* Advance RGB by 1,1,1.*/
223 }
224}
225
226/* sm501fb_check_var
227 *
228 * check common variables for both panel and crt
229*/
230
231static int sm501fb_check_var(struct fb_var_screeninfo *var,
232 struct fb_info *info)
233{
234 struct sm501fb_par *par = info->par;
235 struct sm501fb_info *sm = par->info;
236 unsigned long tmp;
237
238 /* check we can fit these values into the registers */
239
Ville Syrjala7e533702008-03-04 14:28:49 -0800240 if (var->hsync_len > 255 || var->vsync_len > 63)
Ben Dooks5fc404e2007-02-20 13:58:21 -0800241 return -EINVAL;
242
Ville Syrjala7e533702008-03-04 14:28:49 -0800243 /* hdisplay end and hsync start */
244 if ((var->xres + var->right_margin) > 4096)
Ben Dooks5fc404e2007-02-20 13:58:21 -0800245 return -EINVAL;
246
Ville Syrjala7e533702008-03-04 14:28:49 -0800247 /* vdisplay end and vsync start */
Ben Dooks5fc404e2007-02-20 13:58:21 -0800248 if ((var->yres + var->lower_margin) > 2048)
249 return -EINVAL;
250
251 /* hard limits of device */
252
253 if (h_total(var) > 4096 || v_total(var) > 2048)
254 return -EINVAL;
255
256 /* check our line length is going to be 128 bit aligned */
257
258 tmp = (var->xres * var->bits_per_pixel) / 8;
259 if ((tmp & 15) != 0)
260 return -EINVAL;
261
262 /* check the virtual size */
263
264 if (var->xres_virtual > 4096 || var->yres_virtual > 2048)
265 return -EINVAL;
266
267 /* can cope with 8,16 or 32bpp */
268
269 if (var->bits_per_pixel <= 8)
270 var->bits_per_pixel = 8;
271 else if (var->bits_per_pixel <= 16)
272 var->bits_per_pixel = 16;
273 else if (var->bits_per_pixel == 24)
274 var->bits_per_pixel = 32;
275
276 /* set r/g/b positions and validate bpp */
277 switch(var->bits_per_pixel) {
278 case 8:
279 var->red.length = var->bits_per_pixel;
280 var->red.offset = 0;
281 var->green.length = var->bits_per_pixel;
282 var->green.offset = 0;
283 var->blue.length = var->bits_per_pixel;
284 var->blue.offset = 0;
285 var->transp.length = 0;
Ville Syrjala19d06ef2008-03-04 14:28:48 -0800286 var->transp.offset = 0;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800287
288 break;
289
290 case 16:
291 if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
Ben Dooks5fc404e2007-02-20 13:58:21 -0800292 var->blue.offset = 11;
293 var->green.offset = 5;
294 var->red.offset = 0;
Ville Syrjalafedbb362008-03-04 14:28:47 -0800295 } else {
296 var->red.offset = 11;
297 var->green.offset = 5;
298 var->blue.offset = 0;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800299 }
Ville Syrjala19d06ef2008-03-04 14:28:48 -0800300 var->transp.offset = 0;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800301
302 var->red.length = 5;
303 var->green.length = 6;
304 var->blue.length = 5;
305 var->transp.length = 0;
306 break;
307
308 case 32:
309 if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
310 var->transp.offset = 0;
311 var->red.offset = 8;
312 var->green.offset = 16;
313 var->blue.offset = 24;
314 } else {
315 var->transp.offset = 24;
316 var->red.offset = 16;
317 var->green.offset = 8;
318 var->blue.offset = 0;
319 }
320
321 var->red.length = 8;
322 var->green.length = 8;
323 var->blue.length = 8;
324 var->transp.length = 0;
325 break;
326
327 default:
328 return -EINVAL;
329 }
330
331 return 0;
332}
333
334/*
335 * sm501fb_check_var_crt():
336 *
337 * check the parameters for the CRT head, and either bring them
338 * back into range, or return -EINVAL.
339*/
340
341static int sm501fb_check_var_crt(struct fb_var_screeninfo *var,
342 struct fb_info *info)
343{
344 return sm501fb_check_var(var, info);
345}
346
347/* sm501fb_check_var_pnl():
348 *
349 * check the parameters for the CRT head, and either bring them
350 * back into range, or return -EINVAL.
351*/
352
353static int sm501fb_check_var_pnl(struct fb_var_screeninfo *var,
354 struct fb_info *info)
355{
356 return sm501fb_check_var(var, info);
357}
358
359/* sm501fb_set_par_common
360 *
361 * set common registers for framebuffers
362*/
363
364static int sm501fb_set_par_common(struct fb_info *info,
365 struct fb_var_screeninfo *var)
366{
367 struct sm501fb_par *par = info->par;
368 struct sm501fb_info *fbi = par->info;
369 unsigned long pixclock; /* pixelclock in Hz */
370 unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */
371 unsigned int mem_type;
372 unsigned int clock_type;
373 unsigned int head_addr;
374
375 dev_dbg(fbi->dev, "%s: %dx%d, bpp = %d, virtual %dx%d\n",
376 __func__, var->xres, var->yres, var->bits_per_pixel,
377 var->xres_virtual, var->yres_virtual);
378
379 switch (par->head) {
380 case HEAD_CRT:
381 mem_type = SM501_MEMF_CRT;
382 clock_type = SM501_CLOCK_V2XCLK;
383 head_addr = SM501_DC_CRT_FB_ADDR;
384 break;
385
386 case HEAD_PANEL:
387 mem_type = SM501_MEMF_PANEL;
388 clock_type = SM501_CLOCK_P2XCLK;
389 head_addr = SM501_DC_PANEL_FB_ADDR;
390 break;
391
392 default:
393 mem_type = 0; /* stop compiler warnings */
394 head_addr = 0;
395 clock_type = 0;
396 }
397
398 switch (var->bits_per_pixel) {
399 case 8:
400 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
401 break;
402
403 case 16:
Ville Syrjala5619d822008-03-04 14:28:46 -0800404 info->fix.visual = FB_VISUAL_TRUECOLOR;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800405 break;
406
407 case 32:
408 info->fix.visual = FB_VISUAL_TRUECOLOR;
409 break;
410 }
411
412 /* allocate fb memory within 501 */
413 info->fix.line_length = (var->xres_virtual * var->bits_per_pixel)/8;
414 info->fix.smem_len = info->fix.line_length * var->yres_virtual;
415
416 dev_dbg(fbi->dev, "%s: line length = %u\n", __func__,
417 info->fix.line_length);
418
419 if (sm501_alloc_mem(fbi, &par->screen, mem_type,
420 info->fix.smem_len)) {
421 dev_err(fbi->dev, "no memory available\n");
422 return -ENOMEM;
423 }
424
425 info->fix.smem_start = fbi->fbmem_res->start + par->screen.sm_addr;
426
427 info->screen_base = fbi->fbmem + par->screen.sm_addr;
428 info->screen_size = info->fix.smem_len;
429
430 /* set start of framebuffer to the screen */
431
432 writel(par->screen.sm_addr | SM501_ADDR_FLIP, fbi->regs + head_addr);
433
434 /* program CRT clock */
435
436 pixclock = sm501fb_ps_to_hz(var->pixclock);
437
438 sm501pixclock = sm501_set_clock(fbi->dev->parent, clock_type,
439 pixclock);
440
441 /* update fb layer with actual clock used */
442 var->pixclock = sm501fb_hz_to_ps(sm501pixclock);
443
444 dev_dbg(fbi->dev, "%s: pixclock(ps) = %u, pixclock(Hz) = %lu, "
445 "sm501pixclock = %lu, error = %ld%%\n",
446 __func__, var->pixclock, pixclock, sm501pixclock,
447 ((pixclock - sm501pixclock)*100)/pixclock);
448
449 return 0;
450}
451
452/* sm501fb_set_par_geometry
453 *
454 * set the geometry registers for specified framebuffer.
455*/
456
457static void sm501fb_set_par_geometry(struct fb_info *info,
458 struct fb_var_screeninfo *var)
459{
460 struct sm501fb_par *par = info->par;
461 struct sm501fb_info *fbi = par->info;
462 void __iomem *base = fbi->regs;
463 unsigned long reg;
464
465 if (par->head == HEAD_CRT)
466 base += SM501_DC_CRT_H_TOT;
467 else
468 base += SM501_DC_PANEL_H_TOT;
469
470 /* set framebuffer width and display width */
471
472 reg = info->fix.line_length;
473 reg |= ((var->xres * var->bits_per_pixel)/8) << 16;
474
475 writel(reg, fbi->regs + (par->head == HEAD_CRT ?
476 SM501_DC_CRT_FB_OFFSET : SM501_DC_PANEL_FB_OFFSET));
477
478 /* program horizontal total */
479
480 reg = (h_total(var) - 1) << 16;
481 reg |= (var->xres - 1);
482
483 writel(reg, base + SM501_OFF_DC_H_TOT);
484
485 /* program horizontal sync */
486
487 reg = var->hsync_len << 16;
488 reg |= var->xres + var->right_margin - 1;
489
490 writel(reg, base + SM501_OFF_DC_H_SYNC);
491
492 /* program vertical total */
493
494 reg = (v_total(var) - 1) << 16;
495 reg |= (var->yres - 1);
496
497 writel(reg, base + SM501_OFF_DC_V_TOT);
498
499 /* program vertical sync */
500 reg = var->vsync_len << 16;
501 reg |= var->yres + var->lower_margin - 1;
502
503 writel(reg, base + SM501_OFF_DC_V_SYNC);
504}
505
506/* sm501fb_pan_crt
507 *
508 * pan the CRT display output within an virtual framebuffer
509*/
510
511static int sm501fb_pan_crt(struct fb_var_screeninfo *var,
512 struct fb_info *info)
513{
514 struct sm501fb_par *par = info->par;
515 struct sm501fb_info *fbi = par->info;
516 unsigned int bytes_pixel = var->bits_per_pixel / 8;
517 unsigned long reg;
518 unsigned long xoffs;
519
520 xoffs = var->xoffset * bytes_pixel;
521
522 reg = readl(fbi->regs + SM501_DC_CRT_CONTROL);
523
524 reg &= ~SM501_DC_CRT_CONTROL_PIXEL_MASK;
525 reg |= ((xoffs & 15) / bytes_pixel) << 4;
526 writel(reg, fbi->regs + SM501_DC_CRT_CONTROL);
527
528 reg = (par->screen.sm_addr + xoffs +
529 var->yoffset * info->fix.line_length);
530 writel(reg | SM501_ADDR_FLIP, fbi->regs + SM501_DC_CRT_FB_ADDR);
531
532 sm501fb_sync_regs(fbi);
533 return 0;
534}
535
536/* sm501fb_pan_pnl
537 *
538 * pan the panel display output within an virtual framebuffer
539*/
540
541static int sm501fb_pan_pnl(struct fb_var_screeninfo *var,
542 struct fb_info *info)
543{
544 struct sm501fb_par *par = info->par;
545 struct sm501fb_info *fbi = par->info;
546 unsigned long reg;
547
548 reg = var->xoffset | (var->xres_virtual << 16);
549 writel(reg, fbi->regs + SM501_DC_PANEL_FB_WIDTH);
550
551 reg = var->yoffset | (var->yres_virtual << 16);
552 writel(reg, fbi->regs + SM501_DC_PANEL_FB_HEIGHT);
553
554 sm501fb_sync_regs(fbi);
555 return 0;
556}
557
558/* sm501fb_set_par_crt
559 *
560 * Set the CRT video mode from the fb_info structure
561*/
562
563static int sm501fb_set_par_crt(struct fb_info *info)
564{
565 struct sm501fb_par *par = info->par;
566 struct sm501fb_info *fbi = par->info;
567 struct fb_var_screeninfo *var = &info->var;
568 unsigned long control; /* control register */
569 int ret;
570
571 /* activate new configuration */
572
573 dev_dbg(fbi->dev, "%s(%p)\n", __func__, info);
574
575 /* enable CRT DAC - note 0 is on!*/
576 sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
577
578 control = readl(fbi->regs + SM501_DC_CRT_CONTROL);
579
580 control &= (SM501_DC_CRT_CONTROL_PIXEL_MASK |
581 SM501_DC_CRT_CONTROL_GAMMA |
582 SM501_DC_CRT_CONTROL_BLANK |
583 SM501_DC_CRT_CONTROL_SEL |
584 SM501_DC_CRT_CONTROL_CP |
585 SM501_DC_CRT_CONTROL_TVP);
586
587 /* set the sync polarities before we check data source */
588
589 if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
590 control |= SM501_DC_CRT_CONTROL_HSP;
591
592 if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
593 control |= SM501_DC_CRT_CONTROL_VSP;
594
595 if ((control & SM501_DC_CRT_CONTROL_SEL) == 0) {
596 /* the head is displaying panel data... */
597
598 sm501_alloc_mem(fbi, &par->screen, SM501_MEMF_CRT, 0);
599 goto out_update;
600 }
601
602 ret = sm501fb_set_par_common(info, var);
603 if (ret) {
604 dev_err(fbi->dev, "failed to set common parameters\n");
605 return ret;
606 }
607
608 sm501fb_pan_crt(var, info);
609 sm501fb_set_par_geometry(info, var);
610
611 control |= SM501_FIFO_3; /* fill if >3 free slots */
612
613 switch(var->bits_per_pixel) {
614 case 8:
615 control |= SM501_DC_CRT_CONTROL_8BPP;
616 break;
617
618 case 16:
619 control |= SM501_DC_CRT_CONTROL_16BPP;
Ville Syrjala5619d822008-03-04 14:28:46 -0800620 sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
Ben Dooks5fc404e2007-02-20 13:58:21 -0800621 break;
622
623 case 32:
624 control |= SM501_DC_CRT_CONTROL_32BPP;
625 sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
626 break;
627
628 default:
629 BUG();
630 }
631
632 control |= SM501_DC_CRT_CONTROL_SEL; /* CRT displays CRT data */
633 control |= SM501_DC_CRT_CONTROL_TE; /* enable CRT timing */
634 control |= SM501_DC_CRT_CONTROL_ENABLE; /* enable CRT plane */
635
636 out_update:
637 dev_dbg(fbi->dev, "new control is %08lx\n", control);
638
639 writel(control, fbi->regs + SM501_DC_CRT_CONTROL);
640 sm501fb_sync_regs(fbi);
641
642 return 0;
643}
644
645static void sm501fb_panel_power(struct sm501fb_info *fbi, int to)
646{
647 unsigned long control;
648 void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL;
Magnus Dammdfcffa42008-02-06 01:39:24 -0800649 struct sm501_platdata_fbsub *pd = fbi->pdata->fb_pnl;
Ben Dooks5fc404e2007-02-20 13:58:21 -0800650
651 control = readl(ctrl_reg);
652
653 if (to && (control & SM501_DC_PANEL_CONTROL_VDD) == 0) {
654 /* enable panel power */
655
656 control |= SM501_DC_PANEL_CONTROL_VDD; /* FPVDDEN */
657 writel(control, ctrl_reg);
658 sm501fb_sync_regs(fbi);
659 mdelay(10);
660
661 control |= SM501_DC_PANEL_CONTROL_DATA; /* DATA */
662 writel(control, ctrl_reg);
663 sm501fb_sync_regs(fbi);
664 mdelay(10);
665
Ben Dooks206c5d62008-07-23 21:31:35 -0700666 /* VBIASEN */
667
Ben Dookscdc83ae2008-05-23 13:04:53 -0700668 if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
Ben Dooks206c5d62008-07-23 21:31:35 -0700669 if (pd->flags & SM501FB_FLAG_PANEL_INV_VBIASEN)
670 control &= ~SM501_DC_PANEL_CONTROL_BIAS;
671 else
672 control |= SM501_DC_PANEL_CONTROL_BIAS;
673
Magnus Dammdfcffa42008-02-06 01:39:24 -0800674 writel(control, ctrl_reg);
675 sm501fb_sync_regs(fbi);
676 mdelay(10);
677 }
Ben Dooks5fc404e2007-02-20 13:58:21 -0800678
Ben Dookscdc83ae2008-05-23 13:04:53 -0700679 if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
Ben Dooks206c5d62008-07-23 21:31:35 -0700680 if (pd->flags & SM501FB_FLAG_PANEL_INV_FPEN)
681 control &= ~SM501_DC_PANEL_CONTROL_FPEN;
682 else
683 control |= SM501_DC_PANEL_CONTROL_FPEN;
684
Magnus Dammdfcffa42008-02-06 01:39:24 -0800685 writel(control, ctrl_reg);
686 sm501fb_sync_regs(fbi);
687 mdelay(10);
688 }
Ben Dooks5fc404e2007-02-20 13:58:21 -0800689 } else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
690 /* disable panel power */
Ben Dookscdc83ae2008-05-23 13:04:53 -0700691 if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
Ben Dooks206c5d62008-07-23 21:31:35 -0700692 if (pd->flags & SM501FB_FLAG_PANEL_INV_FPEN)
693 control |= SM501_DC_PANEL_CONTROL_FPEN;
694 else
695 control &= ~SM501_DC_PANEL_CONTROL_FPEN;
696
Magnus Dammdfcffa42008-02-06 01:39:24 -0800697 writel(control, ctrl_reg);
698 sm501fb_sync_regs(fbi);
699 mdelay(10);
700 }
Ben Dooks5fc404e2007-02-20 13:58:21 -0800701
Ben Dookscdc83ae2008-05-23 13:04:53 -0700702 if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
Ben Dooks206c5d62008-07-23 21:31:35 -0700703 if (pd->flags & SM501FB_FLAG_PANEL_INV_VBIASEN)
704 control |= SM501_DC_PANEL_CONTROL_BIAS;
705 else
706 control &= ~SM501_DC_PANEL_CONTROL_BIAS;
707
Magnus Dammdfcffa42008-02-06 01:39:24 -0800708 writel(control, ctrl_reg);
709 sm501fb_sync_regs(fbi);
710 mdelay(10);
711 }
Ben Dooks5fc404e2007-02-20 13:58:21 -0800712
713 control &= ~SM501_DC_PANEL_CONTROL_DATA;
714 writel(control, ctrl_reg);
715 sm501fb_sync_regs(fbi);
716 mdelay(10);
717
718 control &= ~SM501_DC_PANEL_CONTROL_VDD;
719 writel(control, ctrl_reg);
720 sm501fb_sync_regs(fbi);
721 mdelay(10);
722 }
723
724 sm501fb_sync_regs(fbi);
725}
726
727/* sm501fb_set_par_pnl
728 *
729 * Set the panel video mode from the fb_info structure
730*/
731
732static int sm501fb_set_par_pnl(struct fb_info *info)
733{
734 struct sm501fb_par *par = info->par;
735 struct sm501fb_info *fbi = par->info;
736 struct fb_var_screeninfo *var = &info->var;
737 unsigned long control;
738 unsigned long reg;
739 int ret;
740
741 dev_dbg(fbi->dev, "%s(%p)\n", __func__, info);
742
743 /* activate this new configuration */
744
745 ret = sm501fb_set_par_common(info, var);
746 if (ret)
747 return ret;
748
749 sm501fb_pan_pnl(var, info);
750 sm501fb_set_par_geometry(info, var);
751
752 /* update control register */
753
754 control = readl(fbi->regs + SM501_DC_PANEL_CONTROL);
755 control &= (SM501_DC_PANEL_CONTROL_GAMMA |
756 SM501_DC_PANEL_CONTROL_VDD |
757 SM501_DC_PANEL_CONTROL_DATA |
758 SM501_DC_PANEL_CONTROL_BIAS |
759 SM501_DC_PANEL_CONTROL_FPEN |
760 SM501_DC_PANEL_CONTROL_CP |
761 SM501_DC_PANEL_CONTROL_CK |
762 SM501_DC_PANEL_CONTROL_HP |
763 SM501_DC_PANEL_CONTROL_VP |
764 SM501_DC_PANEL_CONTROL_HPD |
765 SM501_DC_PANEL_CONTROL_VPD);
766
767 control |= SM501_FIFO_3; /* fill if >3 free slots */
768
769 switch(var->bits_per_pixel) {
770 case 8:
771 control |= SM501_DC_PANEL_CONTROL_8BPP;
772 break;
773
774 case 16:
775 control |= SM501_DC_PANEL_CONTROL_16BPP;
Ville Syrjala5619d822008-03-04 14:28:46 -0800776 sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
Ben Dooks5fc404e2007-02-20 13:58:21 -0800777 break;
778
779 case 32:
780 control |= SM501_DC_PANEL_CONTROL_32BPP;
781 sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
782 break;
783
784 default:
785 BUG();
786 }
787
788 writel(0x0, fbi->regs + SM501_DC_PANEL_PANNING_CONTROL);
789
790 /* panel plane top left and bottom right location */
791
792 writel(0x00, fbi->regs + SM501_DC_PANEL_TL_LOC);
793
794 reg = var->xres - 1;
795 reg |= (var->yres - 1) << 16;
796
797 writel(reg, fbi->regs + SM501_DC_PANEL_BR_LOC);
798
799 /* program panel control register */
800
801 control |= SM501_DC_PANEL_CONTROL_TE; /* enable PANEL timing */
802 control |= SM501_DC_PANEL_CONTROL_EN; /* enable PANEL gfx plane */
803
804 if ((var->sync & FB_SYNC_HOR_HIGH_ACT) == 0)
805 control |= SM501_DC_PANEL_CONTROL_HSP;
806
807 if ((var->sync & FB_SYNC_VERT_HIGH_ACT) == 0)
808 control |= SM501_DC_PANEL_CONTROL_VSP;
809
810 writel(control, fbi->regs + SM501_DC_PANEL_CONTROL);
811 sm501fb_sync_regs(fbi);
812
Ben Dookseb78f9b2007-10-16 01:28:39 -0700813 /* ensure the panel interface is not tristated at this point */
814
815 sm501_modify_reg(fbi->dev->parent, SM501_SYSTEM_CONTROL,
816 0, SM501_SYSCTRL_PANEL_TRISTATE);
817
Ben Dooks5fc404e2007-02-20 13:58:21 -0800818 /* power the panel up */
819 sm501fb_panel_power(fbi, 1);
820 return 0;
821}
822
823
824/* chan_to_field
825 *
826 * convert a colour value into a field position
827 *
828 * from pxafb.c
829*/
830
831static inline unsigned int chan_to_field(unsigned int chan,
832 struct fb_bitfield *bf)
833{
834 chan &= 0xffff;
835 chan >>= 16 - bf->length;
836 return chan << bf->offset;
837}
838
839/* sm501fb_setcolreg
840 *
841 * set the colour mapping for modes that support palettised data
842*/
843
844static int sm501fb_setcolreg(unsigned regno,
845 unsigned red, unsigned green, unsigned blue,
846 unsigned transp, struct fb_info *info)
847{
848 struct sm501fb_par *par = info->par;
849 struct sm501fb_info *fbi = par->info;
850 void __iomem *base = fbi->regs;
851 unsigned int val;
852
853 if (par->head == HEAD_CRT)
854 base += SM501_DC_CRT_PALETTE;
855 else
856 base += SM501_DC_PANEL_PALETTE;
857
858 switch (info->fix.visual) {
859 case FB_VISUAL_TRUECOLOR:
860 /* true-colour, use pseuo-palette */
861
862 if (regno < 16) {
863 u32 *pal = par->pseudo_palette;
864
865 val = chan_to_field(red, &info->var.red);
866 val |= chan_to_field(green, &info->var.green);
867 val |= chan_to_field(blue, &info->var.blue);
868
869 pal[regno] = val;
870 }
871 break;
872
873 case FB_VISUAL_PSEUDOCOLOR:
874 if (regno < 256) {
875 val = (red >> 8) << 16;
876 val |= (green >> 8) << 8;
877 val |= blue >> 8;
878
879 writel(val, base + (regno * 4));
880 }
881
882 break;
883
884 default:
885 return 1; /* unknown type */
886 }
887
888 return 0;
889}
890
891/* sm501fb_blank_pnl
892 *
893 * Blank or un-blank the panel interface
894*/
895
896static int sm501fb_blank_pnl(int blank_mode, struct fb_info *info)
897{
898 struct sm501fb_par *par = info->par;
899 struct sm501fb_info *fbi = par->info;
900
901 dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
902
903 switch (blank_mode) {
904 case FB_BLANK_POWERDOWN:
905 sm501fb_panel_power(fbi, 0);
906 break;
907
908 case FB_BLANK_UNBLANK:
909 sm501fb_panel_power(fbi, 1);
910 break;
911
912 case FB_BLANK_NORMAL:
913 case FB_BLANK_VSYNC_SUSPEND:
914 case FB_BLANK_HSYNC_SUSPEND:
915 default:
916 return 1;
917 }
918
919 return 0;
920}
921
922/* sm501fb_blank_crt
923 *
924 * Blank or un-blank the crt interface
925*/
926
927static int sm501fb_blank_crt(int blank_mode, struct fb_info *info)
928{
929 struct sm501fb_par *par = info->par;
930 struct sm501fb_info *fbi = par->info;
931 unsigned long ctrl;
932
933 dev_dbg(fbi->dev, "%s(mode=%d, %p)\n", __func__, blank_mode, info);
934
935 ctrl = readl(fbi->regs + SM501_DC_CRT_CONTROL);
936
937 switch (blank_mode) {
938 case FB_BLANK_POWERDOWN:
939 ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE;
940 sm501_misc_control(fbi->dev->parent, SM501_MISC_DAC_POWER, 0);
941
942 case FB_BLANK_NORMAL:
943 ctrl |= SM501_DC_CRT_CONTROL_BLANK;
944 break;
945
946 case FB_BLANK_UNBLANK:
947 ctrl &= ~SM501_DC_CRT_CONTROL_BLANK;
948 ctrl |= SM501_DC_CRT_CONTROL_ENABLE;
949 sm501_misc_control(fbi->dev->parent, 0, SM501_MISC_DAC_POWER);
950 break;
951
952 case FB_BLANK_VSYNC_SUSPEND:
953 case FB_BLANK_HSYNC_SUSPEND:
954 default:
955 return 1;
956
957 }
958
959 writel(ctrl, fbi->regs + SM501_DC_CRT_CONTROL);
960 sm501fb_sync_regs(fbi);
961
962 return 0;
963}
964
965/* sm501fb_cursor
966 *
967 * set or change the hardware cursor parameters
968*/
969
Adrian Bunk9540f752007-02-28 20:11:06 -0800970static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
Ben Dooks5fc404e2007-02-20 13:58:21 -0800971{
972 struct sm501fb_par *par = info->par;
973 struct sm501fb_info *fbi = par->info;
974 void __iomem *base = fbi->regs;
975 unsigned long hwc_addr;
976 unsigned long fg, bg;
977
978 dev_dbg(fbi->dev, "%s(%p,%p)\n", __func__, info, cursor);
979
980 if (par->head == HEAD_CRT)
981 base += SM501_DC_CRT_HWC_BASE;
982 else
983 base += SM501_DC_PANEL_HWC_BASE;
984
985 /* check not being asked to exceed capabilities */
986
987 if (cursor->image.width > 64)
988 return -EINVAL;
989
990 if (cursor->image.height > 64)
991 return -EINVAL;
992
993 if (cursor->image.depth > 1)
994 return -EINVAL;
995
996 hwc_addr = readl(base + SM501_OFF_HWC_ADDR);
997
998 if (cursor->enable)
999 writel(hwc_addr | SM501_HWC_EN, base + SM501_OFF_HWC_ADDR);
1000 else
1001 writel(hwc_addr & ~SM501_HWC_EN, base + SM501_OFF_HWC_ADDR);
1002
1003 /* set data */
1004 if (cursor->set & FB_CUR_SETPOS) {
1005 unsigned int x = cursor->image.dx;
1006 unsigned int y = cursor->image.dy;
1007
1008 if (x >= 2048 || y >= 2048 )
1009 return -EINVAL;
1010
1011 dev_dbg(fbi->dev, "set position %d,%d\n", x, y);
1012
1013 //y += cursor->image.height;
1014
1015 writel(x | (y << 16), base + SM501_OFF_HWC_LOC);
1016 }
1017
1018 if (cursor->set & FB_CUR_SETCMAP) {
1019 unsigned int bg_col = cursor->image.bg_color;
1020 unsigned int fg_col = cursor->image.fg_color;
1021
1022 dev_dbg(fbi->dev, "%s: update cmap (%08x,%08x)\n",
1023 __func__, bg_col, fg_col);
1024
1025 bg = ((info->cmap.red[bg_col] & 0xF8) << 8) |
1026 ((info->cmap.green[bg_col] & 0xFC) << 3) |
1027 ((info->cmap.blue[bg_col] & 0xF8) >> 3);
1028
1029 fg = ((info->cmap.red[fg_col] & 0xF8) << 8) |
1030 ((info->cmap.green[fg_col] & 0xFC) << 3) |
1031 ((info->cmap.blue[fg_col] & 0xF8) >> 3);
1032
Andrew Mortonbe3478d2007-05-08 00:40:22 -07001033 dev_dbg(fbi->dev, "fgcol %08lx, bgcol %08lx\n", fg, bg);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001034
1035 writel(bg, base + SM501_OFF_HWC_COLOR_1_2);
1036 writel(fg, base + SM501_OFF_HWC_COLOR_3);
1037 }
1038
1039 if (cursor->set & FB_CUR_SETSIZE ||
1040 cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE)) {
1041 /* SM501 cursor is a two bpp 64x64 bitmap this routine
1042 * clears it to transparent then combines the cursor
1043 * shape plane with the colour plane to set the
1044 * cursor */
1045 int x, y;
1046 const unsigned char *pcol = cursor->image.data;
1047 const unsigned char *pmsk = cursor->mask;
1048 void __iomem *dst = par->cursor.k_addr;
1049 unsigned char dcol = 0;
1050 unsigned char dmsk = 0;
1051 unsigned int op;
1052
1053 dev_dbg(fbi->dev, "%s: setting shape (%d,%d)\n",
1054 __func__, cursor->image.width, cursor->image.height);
1055
1056 for (op = 0; op < (64*64*2)/8; op+=4)
1057 writel(0x0, dst + op);
1058
1059 for (y = 0; y < cursor->image.height; y++) {
1060 for (x = 0; x < cursor->image.width; x++) {
1061 if ((x % 8) == 0) {
1062 dcol = *pcol++;
1063 dmsk = *pmsk++;
1064 } else {
1065 dcol >>= 1;
1066 dmsk >>= 1;
1067 }
1068
1069 if (dmsk & 1) {
1070 op = (dcol & 1) ? 1 : 3;
1071 op <<= ((x % 4) * 2);
1072
1073 op |= readb(dst + (x / 4));
1074 writeb(op, dst + (x / 4));
1075 }
1076 }
1077 dst += (64*2)/8;
1078 }
1079 }
1080
1081 sm501fb_sync_regs(fbi); /* ensure cursor data flushed */
1082 return 0;
1083}
1084
1085/* sm501fb_crtsrc_show
1086 *
1087 * device attribute code to show where the crt output is sourced from
1088*/
1089
1090static ssize_t sm501fb_crtsrc_show(struct device *dev,
1091 struct device_attribute *attr, char *buf)
1092{
1093 struct sm501fb_info *info = dev_get_drvdata(dev);
1094 unsigned long ctrl;
1095
1096 ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1097 ctrl &= SM501_DC_CRT_CONTROL_SEL;
1098
1099 return snprintf(buf, PAGE_SIZE, "%s\n", ctrl ? "crt" : "panel");
1100}
1101
1102/* sm501fb_crtsrc_show
1103 *
1104 * device attribute code to set where the crt output is sourced from
1105*/
1106
1107static ssize_t sm501fb_crtsrc_store(struct device *dev,
1108 struct device_attribute *attr,
1109 const char *buf, size_t len)
1110{
1111 struct sm501fb_info *info = dev_get_drvdata(dev);
1112 enum sm501_controller head;
1113 unsigned long ctrl;
1114
1115 if (len < 1)
1116 return -EINVAL;
1117
Paul Mundt1f2b69f2007-03-05 00:30:31 -08001118 if (strnicmp(buf, "crt", 3) == 0)
Ben Dooks5fc404e2007-02-20 13:58:21 -08001119 head = HEAD_CRT;
Paul Mundt1f2b69f2007-03-05 00:30:31 -08001120 else if (strnicmp(buf, "panel", 5) == 0)
Ben Dooks5fc404e2007-02-20 13:58:21 -08001121 head = HEAD_PANEL;
1122 else
1123 return -EINVAL;
1124
1125 dev_info(dev, "setting crt source to head %d\n", head);
1126
1127 ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1128
1129 if (head == HEAD_CRT) {
1130 ctrl |= SM501_DC_CRT_CONTROL_SEL;
1131 ctrl |= SM501_DC_CRT_CONTROL_ENABLE;
1132 ctrl |= SM501_DC_CRT_CONTROL_TE;
1133 } else {
1134 ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
1135 ctrl &= ~SM501_DC_CRT_CONTROL_ENABLE;
1136 ctrl &= ~SM501_DC_CRT_CONTROL_TE;
1137 }
1138
1139 writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1140 sm501fb_sync_regs(info);
1141
Paul Mundt1f2b69f2007-03-05 00:30:31 -08001142 return len;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001143}
1144
1145/* Prepare the device_attr for registration with sysfs later */
1146static DEVICE_ATTR(crt_src, 0666, sm501fb_crtsrc_show, sm501fb_crtsrc_store);
1147
1148/* sm501fb_show_regs
1149 *
1150 * show the primary sm501 registers
1151*/
1152static int sm501fb_show_regs(struct sm501fb_info *info, char *ptr,
1153 unsigned int start, unsigned int len)
1154{
1155 void __iomem *mem = info->regs;
1156 char *buf = ptr;
1157 unsigned int reg;
1158
1159 for (reg = start; reg < (len + start); reg += 4)
1160 ptr += sprintf(ptr, "%08x = %08x\n", reg, readl(mem + reg));
1161
1162 return ptr - buf;
1163}
1164
1165/* sm501fb_debug_show_crt
1166 *
1167 * show the crt control and cursor registers
1168*/
1169
1170static ssize_t sm501fb_debug_show_crt(struct device *dev,
1171 struct device_attribute *attr, char *buf)
1172{
1173 struct sm501fb_info *info = dev_get_drvdata(dev);
1174 char *ptr = buf;
1175
1176 ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_CONTROL, 0x40);
1177 ptr += sm501fb_show_regs(info, ptr, SM501_DC_CRT_HWC_BASE, 0x10);
1178
1179 return ptr - buf;
1180}
1181
1182static DEVICE_ATTR(fbregs_crt, 0444, sm501fb_debug_show_crt, NULL);
1183
1184/* sm501fb_debug_show_pnl
1185 *
1186 * show the panel control and cursor registers
1187*/
1188
1189static ssize_t sm501fb_debug_show_pnl(struct device *dev,
1190 struct device_attribute *attr, char *buf)
1191{
1192 struct sm501fb_info *info = dev_get_drvdata(dev);
1193 char *ptr = buf;
1194
1195 ptr += sm501fb_show_regs(info, ptr, 0x0, 0x40);
1196 ptr += sm501fb_show_regs(info, ptr, SM501_DC_PANEL_HWC_BASE, 0x10);
1197
1198 return ptr - buf;
1199}
1200
1201static DEVICE_ATTR(fbregs_pnl, 0444, sm501fb_debug_show_pnl, NULL);
1202
1203/* framebuffer ops */
1204
1205static struct fb_ops sm501fb_ops_crt = {
1206 .owner = THIS_MODULE,
1207 .fb_check_var = sm501fb_check_var_crt,
1208 .fb_set_par = sm501fb_set_par_crt,
1209 .fb_blank = sm501fb_blank_crt,
1210 .fb_setcolreg = sm501fb_setcolreg,
1211 .fb_pan_display = sm501fb_pan_crt,
1212 .fb_cursor = sm501fb_cursor,
1213 .fb_fillrect = cfb_fillrect,
1214 .fb_copyarea = cfb_copyarea,
1215 .fb_imageblit = cfb_imageblit,
1216};
1217
1218static struct fb_ops sm501fb_ops_pnl = {
1219 .owner = THIS_MODULE,
1220 .fb_check_var = sm501fb_check_var_pnl,
1221 .fb_set_par = sm501fb_set_par_pnl,
1222 .fb_pan_display = sm501fb_pan_pnl,
1223 .fb_blank = sm501fb_blank_pnl,
1224 .fb_setcolreg = sm501fb_setcolreg,
1225 .fb_cursor = sm501fb_cursor,
1226 .fb_fillrect = cfb_fillrect,
1227 .fb_copyarea = cfb_copyarea,
1228 .fb_imageblit = cfb_imageblit,
1229};
1230
1231/* sm501fb_info_alloc
1232 *
1233 * creates and initialises an sm501fb_info structure
1234*/
1235
1236static struct sm501fb_info *sm501fb_info_alloc(struct fb_info *fbinfo_crt,
1237 struct fb_info *fbinfo_pnl)
1238{
1239 struct sm501fb_info *info;
1240 struct sm501fb_par *par;
1241
1242 info = kzalloc(sizeof(struct sm501fb_info), GFP_KERNEL);
1243 if (info) {
1244 /* set the references back */
1245
1246 par = fbinfo_crt->par;
1247 par->info = info;
1248 par->head = HEAD_CRT;
1249 fbinfo_crt->pseudo_palette = &par->pseudo_palette;
1250
1251 par = fbinfo_pnl->par;
1252 par->info = info;
1253 par->head = HEAD_PANEL;
1254 fbinfo_pnl->pseudo_palette = &par->pseudo_palette;
1255
1256 /* store the two fbs into our info */
1257 info->fb[HEAD_CRT] = fbinfo_crt;
1258 info->fb[HEAD_PANEL] = fbinfo_pnl;
1259 }
1260
1261 return info;
1262}
1263
1264/* sm501_init_cursor
1265 *
1266 * initialise hw cursor parameters
1267*/
1268
Adrian Bunk9540f752007-02-28 20:11:06 -08001269static int sm501_init_cursor(struct fb_info *fbi, unsigned int reg_base)
Ben Dooks5fc404e2007-02-20 13:58:21 -08001270{
1271 struct sm501fb_par *par = fbi->par;
1272 struct sm501fb_info *info = par->info;
1273 int ret;
1274
1275 par->cursor_regs = info->regs + reg_base;
1276
1277 ret = sm501_alloc_mem(info, &par->cursor, SM501_MEMF_CURSOR, 1024);
1278 if (ret < 0)
1279 return ret;
1280
1281 /* initialise the colour registers */
1282
1283 writel(par->cursor.sm_addr, par->cursor_regs + SM501_OFF_HWC_ADDR);
1284
1285 writel(0x00, par->cursor_regs + SM501_OFF_HWC_LOC);
1286 writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_1_2);
1287 writel(0x00, par->cursor_regs + SM501_OFF_HWC_COLOR_3);
1288 sm501fb_sync_regs(info);
1289
1290 return 0;
1291}
1292
1293/* sm501fb_info_start
1294 *
1295 * fills the par structure claiming resources and remapping etc.
1296*/
1297
1298static int sm501fb_start(struct sm501fb_info *info,
1299 struct platform_device *pdev)
1300{
1301 struct resource *res;
1302 struct device *dev;
Magnus Dammb1230ee2008-02-06 01:39:25 -08001303 int k;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001304 int ret;
1305
1306 info->dev = dev = &pdev->dev;
1307 platform_set_drvdata(pdev, info);
1308
1309 info->irq = ret = platform_get_irq(pdev, 0);
1310 if (ret < 0) {
1311 /* we currently do not use the IRQ */
1312 dev_warn(dev, "no irq for device\n");
1313 }
1314
1315 /* allocate, reserve and remap resources for registers */
1316 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1317 if (res == NULL) {
1318 dev_err(dev, "no resource definition for registers\n");
1319 ret = -ENOENT;
1320 goto err_release;
1321 }
1322
1323 info->regs_res = request_mem_region(res->start,
1324 res->end - res->start,
1325 pdev->name);
1326
1327 if (info->regs_res == NULL) {
1328 dev_err(dev, "cannot claim registers\n");
1329 ret = -ENXIO;
1330 goto err_release;
1331 }
1332
1333 info->regs = ioremap(res->start, (res->end - res->start)+1);
1334 if (info->regs == NULL) {
1335 dev_err(dev, "cannot remap registers\n");
1336 ret = -ENXIO;
1337 goto err_regs_res;
1338 }
1339
1340 /* allocate, reserve resources for framebuffer */
1341 res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
1342 if (res == NULL) {
1343 dev_err(dev, "no memory resource defined\n");
1344 ret = -ENXIO;
1345 goto err_regs_map;
1346 }
1347
1348 info->fbmem_res = request_mem_region(res->start,
1349 (res->end - res->start)+1,
1350 pdev->name);
1351 if (info->fbmem_res == NULL) {
1352 dev_err(dev, "cannot claim framebuffer\n");
1353 ret = -ENXIO;
1354 goto err_regs_map;
1355 }
1356
1357 info->fbmem = ioremap(res->start, (res->end - res->start)+1);
1358 if (info->fbmem == NULL) {
1359 dev_err(dev, "cannot remap framebuffer\n");
1360 goto err_mem_res;
1361 }
1362
1363 info->fbmem_len = (res->end - res->start)+1;
1364
Magnus Dammb1230ee2008-02-06 01:39:25 -08001365 /* clear framebuffer memory - avoids garbage data on unused fb */
1366 memset(info->fbmem, 0, info->fbmem_len);
1367
1368 /* clear palette ram - undefined at power on */
1369 for (k = 0; k < (256 * 3); k++)
1370 writel(0, info->regs + SM501_DC_PANEL_PALETTE + (k * 4));
1371
Ben Dooks5fc404e2007-02-20 13:58:21 -08001372 /* enable display controller */
1373 sm501_unit_power(dev->parent, SM501_GATE_DISPLAY, 1);
1374
1375 /* setup cursors */
1376
1377 sm501_init_cursor(info->fb[HEAD_CRT], SM501_DC_CRT_HWC_ADDR);
1378 sm501_init_cursor(info->fb[HEAD_PANEL], SM501_DC_PANEL_HWC_ADDR);
1379
1380 return 0; /* everything is setup */
1381
1382 err_mem_res:
1383 release_resource(info->fbmem_res);
1384 kfree(info->fbmem_res);
1385
1386 err_regs_map:
1387 iounmap(info->regs);
1388
1389 err_regs_res:
1390 release_resource(info->regs_res);
1391 kfree(info->regs_res);
1392
1393 err_release:
1394 return ret;
1395}
1396
1397static void sm501fb_stop(struct sm501fb_info *info)
1398{
1399 /* disable display controller */
1400 sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0);
1401
1402 iounmap(info->fbmem);
1403 release_resource(info->fbmem_res);
1404 kfree(info->fbmem_res);
1405
1406 iounmap(info->regs);
1407 release_resource(info->regs_res);
1408 kfree(info->regs_res);
1409}
1410
1411static void sm501fb_info_release(struct sm501fb_info *info)
1412{
1413 kfree(info);
1414}
1415
1416static int sm501fb_init_fb(struct fb_info *fb,
1417 enum sm501_controller head,
1418 const char *fbname)
1419{
1420 struct sm501_platdata_fbsub *pd;
1421 struct sm501fb_par *par = fb->par;
1422 struct sm501fb_info *info = par->info;
1423 unsigned long ctrl;
1424 unsigned int enable;
1425 int ret;
1426
1427 switch (head) {
1428 case HEAD_CRT:
1429 pd = info->pdata->fb_crt;
1430 ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1431 enable = (ctrl & SM501_DC_CRT_CONTROL_ENABLE) ? 1 : 0;
1432
1433 /* ensure we set the correct source register */
1434 if (info->pdata->fb_route != SM501_FB_CRT_PANEL) {
1435 ctrl |= SM501_DC_CRT_CONTROL_SEL;
1436 writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1437 }
1438
1439 break;
1440
1441 case HEAD_PANEL:
1442 pd = info->pdata->fb_pnl;
1443 ctrl = readl(info->regs + SM501_DC_PANEL_CONTROL);
1444 enable = (ctrl & SM501_DC_PANEL_CONTROL_EN) ? 1 : 0;
1445 break;
1446
1447 default:
1448 pd = NULL; /* stop compiler warnings */
1449 ctrl = 0;
1450 enable = 0;
1451 BUG();
1452 }
1453
1454 dev_info(info->dev, "fb %s %sabled at start\n",
1455 fbname, enable ? "en" : "dis");
1456
1457 /* check to see if our routing allows this */
1458
1459 if (head == HEAD_CRT && info->pdata->fb_route == SM501_FB_CRT_PANEL) {
1460 ctrl &= ~SM501_DC_CRT_CONTROL_SEL;
1461 writel(ctrl, info->regs + SM501_DC_CRT_CONTROL);
1462 enable = 0;
1463 }
1464
1465 strlcpy(fb->fix.id, fbname, sizeof(fb->fix.id));
1466
1467 memcpy(&par->ops,
1468 (head == HEAD_CRT) ? &sm501fb_ops_crt : &sm501fb_ops_pnl,
1469 sizeof(struct fb_ops));
1470
1471 /* update ops dependant on what we've been passed */
1472
1473 if ((pd->flags & SM501FB_FLAG_USE_HWCURSOR) == 0)
1474 par->ops.fb_cursor = NULL;
1475
1476 fb->fbops = &par->ops;
1477 fb->flags = FBINFO_FLAG_DEFAULT |
1478 FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
1479
1480 /* fixed data */
1481
1482 fb->fix.type = FB_TYPE_PACKED_PIXELS;
1483 fb->fix.type_aux = 0;
1484 fb->fix.xpanstep = 1;
1485 fb->fix.ypanstep = 1;
1486 fb->fix.ywrapstep = 0;
1487 fb->fix.accel = FB_ACCEL_NONE;
1488
1489 /* screenmode */
1490
1491 fb->var.nonstd = 0;
1492 fb->var.activate = FB_ACTIVATE_NOW;
1493 fb->var.accel_flags = 0;
1494 fb->var.vmode = FB_VMODE_NONINTERLACED;
1495 fb->var.bits_per_pixel = 16;
1496
1497 if (enable && (pd->flags & SM501FB_FLAG_USE_INIT_MODE) && 0) {
1498 /* TODO read the mode from the current display */
1499
1500 } else {
1501 if (pd->def_mode) {
1502 dev_info(info->dev, "using supplied mode\n");
1503 fb_videomode_to_var(&fb->var, pd->def_mode);
1504
1505 fb->var.bits_per_pixel = pd->def_bpp ? pd->def_bpp : 8;
1506 fb->var.xres_virtual = fb->var.xres;
1507 fb->var.yres_virtual = fb->var.yres;
1508 } else {
1509 ret = fb_find_mode(&fb->var, fb,
1510 NULL, NULL, 0, NULL, 8);
1511
1512 if (ret == 0 || ret == 4) {
1513 dev_err(info->dev,
1514 "failed to get initial mode\n");
1515 return -EINVAL;
1516 }
1517 }
1518 }
1519
1520 /* initialise and set the palette */
1521 fb_alloc_cmap(&fb->cmap, NR_PALETTE, 0);
1522 fb_set_cmap(&fb->cmap, fb);
1523
1524 ret = (fb->fbops->fb_check_var)(&fb->var, fb);
1525 if (ret)
1526 dev_err(info->dev, "check_var() failed on initial setup?\n");
1527
1528 /* ensure we've activated our new configuration */
1529 (fb->fbops->fb_set_par)(fb);
1530
1531 return 0;
1532}
1533
1534/* default platform data if none is supplied (ie, PCI device) */
1535
1536static struct sm501_platdata_fbsub sm501fb_pdata_crt = {
1537 .flags = (SM501FB_FLAG_USE_INIT_MODE |
1538 SM501FB_FLAG_USE_HWCURSOR |
1539 SM501FB_FLAG_USE_HWACCEL |
1540 SM501FB_FLAG_DISABLE_AT_EXIT),
1541
1542};
1543
1544static struct sm501_platdata_fbsub sm501fb_pdata_pnl = {
1545 .flags = (SM501FB_FLAG_USE_INIT_MODE |
1546 SM501FB_FLAG_USE_HWCURSOR |
1547 SM501FB_FLAG_USE_HWACCEL |
1548 SM501FB_FLAG_DISABLE_AT_EXIT),
1549};
1550
1551static struct sm501_platdata_fb sm501fb_def_pdata = {
1552 .fb_route = SM501_FB_OWN,
1553 .fb_crt = &sm501fb_pdata_crt,
1554 .fb_pnl = &sm501fb_pdata_pnl,
1555};
1556
1557static char driver_name_crt[] = "sm501fb-crt";
1558static char driver_name_pnl[] = "sm501fb-panel";
1559
1560static int __init sm501fb_probe(struct platform_device *pdev)
1561{
1562 struct sm501fb_info *info;
1563 struct device *dev = &pdev->dev;
1564 struct fb_info *fbinfo_crt;
1565 struct fb_info *fbinfo_pnl;
1566 int ret;
1567
1568 /* allocate our framebuffers */
1569
1570 fbinfo_crt = framebuffer_alloc(sizeof(struct sm501fb_par), dev);
1571 if (fbinfo_crt == NULL) {
1572 dev_err(dev, "cannot allocate crt framebuffer\n");
1573 return -ENOMEM;
1574 }
1575
1576 fbinfo_pnl = framebuffer_alloc(sizeof(struct sm501fb_par), dev);
1577 if (fbinfo_pnl == NULL) {
1578 dev_err(dev, "cannot allocate panel framebuffer\n");
1579 ret = -ENOMEM;
1580 goto fbinfo_crt_alloc_fail;
1581 }
1582
1583 info = sm501fb_info_alloc(fbinfo_crt, fbinfo_pnl);
1584 if (info == NULL) {
1585 dev_err(dev, "cannot allocate par\n");
1586 ret = -ENOMEM;
1587 goto sm501fb_alloc_fail;
1588 }
1589
1590 if (dev->parent->platform_data) {
1591 struct sm501_platdata *pd = dev->parent->platform_data;
1592 info->pdata = pd->fb;
1593 }
1594
1595 if (info->pdata == NULL) {
1596 dev_info(dev, "using default configuration data\n");
1597 info->pdata = &sm501fb_def_pdata;
1598 }
1599
1600 /* start the framebuffers */
1601
1602 ret = sm501fb_start(info, pdev);
1603 if (ret) {
1604 dev_err(dev, "cannot initialise SM501\n");
1605 goto sm501fb_start_fail;
1606 }
1607
1608 /* CRT framebuffer setup */
1609
1610 ret = sm501fb_init_fb(fbinfo_crt, HEAD_CRT, driver_name_crt);
1611 if (ret) {
1612 dev_err(dev, "cannot initialise CRT fb\n");
1613 goto sm501fb_start_fail;
1614 }
1615
1616 /* Panel framebuffer setup */
1617
1618 ret = sm501fb_init_fb(fbinfo_pnl, HEAD_PANEL, driver_name_pnl);
1619 if (ret) {
1620 dev_err(dev, "cannot initialise Panel fb\n");
1621 goto sm501fb_start_fail;
1622 }
1623
1624 /* register framebuffers */
1625
1626 ret = register_framebuffer(fbinfo_crt);
1627 if (ret < 0) {
1628 dev_err(dev, "failed to register CRT fb (%d)\n", ret);
1629 goto register_crt_fail;
1630 }
1631
1632 ret = register_framebuffer(fbinfo_pnl);
1633 if (ret < 0) {
1634 dev_err(dev, "failed to register panel fb (%d)\n", ret);
1635 goto register_pnl_fail;
1636 }
1637
1638 dev_info(dev, "fb%d: %s frame buffer device\n",
1639 fbinfo_crt->node, fbinfo_crt->fix.id);
1640
1641 dev_info(dev, "fb%d: %s frame buffer device\n",
1642 fbinfo_pnl->node, fbinfo_pnl->fix.id);
1643
1644 /* create device files */
1645
1646 ret = device_create_file(dev, &dev_attr_crt_src);
1647 if (ret)
1648 goto crtsrc_fail;
1649
1650 ret = device_create_file(dev, &dev_attr_fbregs_pnl);
1651 if (ret)
1652 goto fbregs_pnl_fail;
1653
1654 ret = device_create_file(dev, &dev_attr_fbregs_crt);
1655 if (ret)
1656 goto fbregs_crt_fail;
1657
1658 /* we registered, return ok */
1659 return 0;
1660
1661 fbregs_crt_fail:
1662 device_remove_file(dev, &dev_attr_fbregs_pnl);
1663
1664 fbregs_pnl_fail:
1665 device_remove_file(dev, &dev_attr_crt_src);
1666
1667 crtsrc_fail:
1668 unregister_framebuffer(fbinfo_pnl);
1669
1670 register_pnl_fail:
1671 unregister_framebuffer(fbinfo_crt);
1672
1673 register_crt_fail:
1674 sm501fb_stop(info);
1675
1676 sm501fb_start_fail:
1677 sm501fb_info_release(info);
1678
1679 sm501fb_alloc_fail:
1680 framebuffer_release(fbinfo_pnl);
1681
1682 fbinfo_crt_alloc_fail:
1683 framebuffer_release(fbinfo_crt);
1684
1685 return ret;
1686}
1687
1688
1689/*
1690 * Cleanup
1691 */
1692static int sm501fb_remove(struct platform_device *pdev)
1693{
1694 struct sm501fb_info *info = platform_get_drvdata(pdev);
1695 struct fb_info *fbinfo_crt = info->fb[0];
1696 struct fb_info *fbinfo_pnl = info->fb[1];
1697
1698 device_remove_file(&pdev->dev, &dev_attr_fbregs_crt);
1699 device_remove_file(&pdev->dev, &dev_attr_fbregs_pnl);
1700 device_remove_file(&pdev->dev, &dev_attr_crt_src);
1701
1702 unregister_framebuffer(fbinfo_crt);
1703 unregister_framebuffer(fbinfo_pnl);
1704
1705 sm501fb_stop(info);
1706 sm501fb_info_release(info);
1707
1708 framebuffer_release(fbinfo_pnl);
1709 framebuffer_release(fbinfo_crt);
1710
1711 return 0;
1712}
1713
1714#ifdef CONFIG_PM
1715
1716static int sm501fb_suspend_fb(struct sm501fb_info *info,
1717 enum sm501_controller head)
1718{
1719 struct fb_info *fbi = info->fb[head];
1720 struct sm501fb_par *par = fbi->par;
1721
1722 if (par->screen.size == 0)
1723 return 0;
1724
Ben Dooks40488db2008-02-06 01:39:38 -08001725 /* blank the relevant interface to ensure unit power minimised */
1726 (par->ops.fb_blank)(FB_BLANK_POWERDOWN, fbi);
1727
1728 /* tell console/fb driver we are suspending */
1729
1730 acquire_console_sem();
1731 fb_set_suspend(fbi, 1);
1732 release_console_sem();
1733
Ben Dooks5fc404e2007-02-20 13:58:21 -08001734 /* backup copies in case chip is powered down over suspend */
1735
1736 par->store_fb = vmalloc(par->screen.size);
1737 if (par->store_fb == NULL) {
1738 dev_err(info->dev, "no memory to store screen\n");
1739 return -ENOMEM;
1740 }
1741
1742 par->store_cursor = vmalloc(par->cursor.size);
1743 if (par->store_cursor == NULL) {
1744 dev_err(info->dev, "no memory to store cursor\n");
1745 goto err_nocursor;
1746 }
1747
Ben Dooksc1f303b2007-10-16 01:28:37 -07001748 dev_dbg(info->dev, "suspending screen to %p\n", par->store_fb);
1749 dev_dbg(info->dev, "suspending cursor to %p\n", par->store_cursor);
1750
Ben Dooks5fc404e2007-02-20 13:58:21 -08001751 memcpy_fromio(par->store_fb, par->screen.k_addr, par->screen.size);
1752 memcpy_fromio(par->store_cursor, par->cursor.k_addr, par->cursor.size);
Ben Dooksf22e5212007-10-16 01:28:38 -07001753
Ben Dooks5fc404e2007-02-20 13:58:21 -08001754 return 0;
1755
1756 err_nocursor:
1757 vfree(par->store_fb);
Ben Dooksc1f303b2007-10-16 01:28:37 -07001758 par->store_fb = NULL;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001759
1760 return -ENOMEM;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001761}
1762
1763static void sm501fb_resume_fb(struct sm501fb_info *info,
1764 enum sm501_controller head)
1765{
1766 struct fb_info *fbi = info->fb[head];
1767 struct sm501fb_par *par = fbi->par;
1768
1769 if (par->screen.size == 0)
1770 return;
1771
1772 /* re-activate the configuration */
1773
1774 (par->ops.fb_set_par)(fbi);
1775
1776 /* restore the data */
1777
Ben Dooksc1f303b2007-10-16 01:28:37 -07001778 dev_dbg(info->dev, "restoring screen from %p\n", par->store_fb);
1779 dev_dbg(info->dev, "restoring cursor from %p\n", par->store_cursor);
1780
1781 if (par->store_fb)
1782 memcpy_toio(par->screen.k_addr, par->store_fb,
1783 par->screen.size);
1784
1785 if (par->store_cursor)
1786 memcpy_toio(par->cursor.k_addr, par->store_cursor,
1787 par->cursor.size);
Ben Dooks5fc404e2007-02-20 13:58:21 -08001788
Ben Dooksf22e5212007-10-16 01:28:38 -07001789 acquire_console_sem();
1790 fb_set_suspend(fbi, 0);
1791 release_console_sem();
1792
Ben Dooks5fc404e2007-02-20 13:58:21 -08001793 vfree(par->store_fb);
1794 vfree(par->store_cursor);
1795}
1796
1797
1798/* suspend and resume support */
1799
1800static int sm501fb_suspend(struct platform_device *pdev, pm_message_t state)
1801{
1802 struct sm501fb_info *info = platform_get_drvdata(pdev);
1803
Ben Dooksc1f303b2007-10-16 01:28:37 -07001804 /* store crt control to resume with */
1805 info->pm_crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1806
Ben Dooks5fc404e2007-02-20 13:58:21 -08001807 sm501fb_suspend_fb(info, HEAD_CRT);
1808 sm501fb_suspend_fb(info, HEAD_PANEL);
1809
1810 /* turn off the clocks, in case the device is not powered down */
1811 sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 0);
1812
1813 return 0;
1814}
1815
Ben Dooksc1f303b2007-10-16 01:28:37 -07001816#define SM501_CRT_CTRL_SAVE (SM501_DC_CRT_CONTROL_TVP | \
1817 SM501_DC_CRT_CONTROL_SEL)
1818
1819
Ben Dooks5fc404e2007-02-20 13:58:21 -08001820static int sm501fb_resume(struct platform_device *pdev)
1821{
1822 struct sm501fb_info *info = platform_get_drvdata(pdev);
Ben Dooksc1f303b2007-10-16 01:28:37 -07001823 unsigned long crt_ctrl;
Ben Dooks5fc404e2007-02-20 13:58:21 -08001824
1825 sm501_unit_power(info->dev->parent, SM501_GATE_DISPLAY, 1);
1826
Ben Dooksc1f303b2007-10-16 01:28:37 -07001827 /* restore the items we want to be saved for crt control */
1828
1829 crt_ctrl = readl(info->regs + SM501_DC_CRT_CONTROL);
1830 crt_ctrl &= ~SM501_CRT_CTRL_SAVE;
1831 crt_ctrl |= info->pm_crt_ctrl & SM501_CRT_CTRL_SAVE;
1832 writel(crt_ctrl, info->regs + SM501_DC_CRT_CONTROL);
1833
Ben Dooks5fc404e2007-02-20 13:58:21 -08001834 sm501fb_resume_fb(info, HEAD_CRT);
1835 sm501fb_resume_fb(info, HEAD_PANEL);
1836
1837 return 0;
1838}
1839
1840#else
1841#define sm501fb_suspend NULL
1842#define sm501fb_resume NULL
1843#endif
1844
1845static struct platform_driver sm501fb_driver = {
1846 .probe = sm501fb_probe,
1847 .remove = sm501fb_remove,
1848 .suspend = sm501fb_suspend,
1849 .resume = sm501fb_resume,
1850 .driver = {
1851 .name = "sm501-fb",
1852 .owner = THIS_MODULE,
1853 },
1854};
1855
Adrian Bunk9540f752007-02-28 20:11:06 -08001856static int __devinit sm501fb_init(void)
Ben Dooks5fc404e2007-02-20 13:58:21 -08001857{
1858 return platform_driver_register(&sm501fb_driver);
1859}
1860
1861static void __exit sm501fb_cleanup(void)
1862{
1863 platform_driver_unregister(&sm501fb_driver);
1864}
1865
1866module_init(sm501fb_init);
1867module_exit(sm501fb_cleanup);
1868
1869MODULE_AUTHOR("Ben Dooks, Vincent Sanders");
1870MODULE_DESCRIPTION("SM501 Framebuffer driver");
1871MODULE_LICENSE("GPL v2");