Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 1 | /* |
| 2 | * pata_cs5536.c - CS5536 PATA for new ATA layer |
| 3 | * (C) 2007 Martin K. Petersen <mkp@mkp.net> |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License version 2 as |
| 7 | * published by the Free Software Foundation. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, |
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 12 | * GNU General Public License for more details. |
| 13 | * |
| 14 | * You should have received a copy of the GNU General Public License |
| 15 | * along with this program; if not, write to the Free Software |
| 16 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 17 | * |
| 18 | * Documentation: |
| 19 | * Available from AMD web site. |
| 20 | * |
| 21 | * The IDE timing registers for the CS5536 live in the Geode Machine |
| 22 | * Specific Register file and not PCI config space. Most BIOSes |
| 23 | * virtualize the PCI registers so the chip looks like a standard IDE |
| 24 | * controller. Unfortunately not all implementations get this right. |
| 25 | * In particular some have problems with unaligned accesses to the |
| 26 | * virtualized PCI registers. This driver always does full dword |
| 27 | * writes to work around the issue. Also, in case of a bad BIOS this |
| 28 | * driver can be loaded with the "msr=1" parameter which forces using |
| 29 | * the Machine Specific Registers to configure the device. |
| 30 | */ |
| 31 | |
| 32 | #include <linux/kernel.h> |
| 33 | #include <linux/module.h> |
| 34 | #include <linux/pci.h> |
| 35 | #include <linux/init.h> |
| 36 | #include <linux/blkdev.h> |
| 37 | #include <linux/delay.h> |
| 38 | #include <linux/libata.h> |
| 39 | #include <scsi/scsi_host.h> |
| 40 | #include <asm/msr.h> |
| 41 | |
| 42 | #define DRV_NAME "pata_cs5536" |
Martin K. Petersen | b6966a6 | 2008-02-13 01:41:44 -0500 | [diff] [blame] | 43 | #define DRV_VERSION "0.0.7" |
Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 44 | |
| 45 | enum { |
| 46 | CFG = 0, |
| 47 | DTC = 1, |
| 48 | CAST = 2, |
| 49 | ETC = 3, |
| 50 | |
| 51 | MSR_IDE_BASE = 0x51300000, |
| 52 | MSR_IDE_CFG = (MSR_IDE_BASE + 0x10), |
| 53 | MSR_IDE_DTC = (MSR_IDE_BASE + 0x12), |
| 54 | MSR_IDE_CAST = (MSR_IDE_BASE + 0x13), |
| 55 | MSR_IDE_ETC = (MSR_IDE_BASE + 0x14), |
| 56 | |
| 57 | PCI_IDE_CFG = 0x40, |
| 58 | PCI_IDE_DTC = 0x48, |
| 59 | PCI_IDE_CAST = 0x4c, |
| 60 | PCI_IDE_ETC = 0x50, |
| 61 | |
| 62 | IDE_CFG_CHANEN = 0x2, |
| 63 | IDE_CFG_CABLE = 0x10000, |
| 64 | |
| 65 | IDE_D0_SHIFT = 24, |
| 66 | IDE_D1_SHIFT = 16, |
| 67 | IDE_DRV_MASK = 0xff, |
| 68 | |
| 69 | IDE_CAST_D0_SHIFT = 6, |
| 70 | IDE_CAST_D1_SHIFT = 4, |
| 71 | IDE_CAST_DRV_MASK = 0x3, |
| 72 | IDE_CAST_CMD_MASK = 0xff, |
| 73 | IDE_CAST_CMD_SHIFT = 24, |
| 74 | |
| 75 | IDE_ETC_NODMA = 0x03, |
| 76 | }; |
| 77 | |
| 78 | static int use_msr; |
| 79 | |
| 80 | static const u32 msr_reg[4] = { |
| 81 | MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC, |
| 82 | }; |
| 83 | |
| 84 | static const u8 pci_reg[4] = { |
| 85 | PCI_IDE_CFG, PCI_IDE_DTC, PCI_IDE_CAST, PCI_IDE_ETC, |
| 86 | }; |
| 87 | |
Harvey Harrison | 2072fb5 | 2008-02-13 21:14:23 -0800 | [diff] [blame^] | 88 | static inline int cs5536_read(struct pci_dev *pdev, int reg, u32 *val) |
Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 89 | { |
| 90 | if (unlikely(use_msr)) { |
| 91 | u32 dummy; |
| 92 | |
| 93 | rdmsr(msr_reg[reg], *val, dummy); |
| 94 | return 0; |
| 95 | } |
| 96 | |
| 97 | return pci_read_config_dword(pdev, pci_reg[reg], val); |
| 98 | } |
| 99 | |
| 100 | static inline int cs5536_write(struct pci_dev *pdev, int reg, int val) |
| 101 | { |
| 102 | if (unlikely(use_msr)) { |
| 103 | wrmsr(msr_reg[reg], val, 0); |
| 104 | return 0; |
| 105 | } |
| 106 | |
| 107 | return pci_write_config_dword(pdev, pci_reg[reg], val); |
| 108 | } |
| 109 | |
| 110 | /** |
| 111 | * cs5536_cable_detect - detect cable type |
| 112 | * @ap: Port to detect on |
| 113 | * @deadline: deadline jiffies for the operation |
| 114 | * |
| 115 | * Perform cable detection for ATA66 capable cable. Return a libata |
| 116 | * cable type. |
| 117 | */ |
| 118 | |
| 119 | static int cs5536_cable_detect(struct ata_port *ap) |
| 120 | { |
| 121 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
| 122 | u32 cfg; |
| 123 | |
| 124 | cs5536_read(pdev, CFG, &cfg); |
| 125 | |
| 126 | if (cfg & (IDE_CFG_CABLE << ap->port_no)) |
| 127 | return ATA_CBL_PATA80; |
| 128 | else |
| 129 | return ATA_CBL_PATA40; |
| 130 | } |
| 131 | |
| 132 | /** |
| 133 | * cs5536_set_piomode - PIO setup |
| 134 | * @ap: ATA interface |
| 135 | * @adev: device on the interface |
| 136 | */ |
| 137 | |
| 138 | static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev) |
| 139 | { |
| 140 | static const u8 drv_timings[5] = { |
| 141 | 0x98, 0x55, 0x32, 0x21, 0x20, |
| 142 | }; |
| 143 | |
| 144 | static const u8 addr_timings[5] = { |
| 145 | 0x2, 0x1, 0x0, 0x0, 0x0, |
| 146 | }; |
| 147 | |
| 148 | static const u8 cmd_timings[5] = { |
| 149 | 0x99, 0x92, 0x90, 0x22, 0x20, |
| 150 | }; |
| 151 | |
| 152 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
| 153 | struct ata_device *pair = ata_dev_pair(adev); |
| 154 | int mode = adev->pio_mode - XFER_PIO_0; |
| 155 | int cmdmode = mode; |
Martin K. Petersen | b6966a6 | 2008-02-13 01:41:44 -0500 | [diff] [blame] | 156 | int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; |
| 157 | int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; |
Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 158 | u32 dtc, cast, etc; |
| 159 | |
| 160 | if (pair) |
| 161 | cmdmode = min(mode, pair->pio_mode - XFER_PIO_0); |
| 162 | |
| 163 | cs5536_read(pdev, DTC, &dtc); |
| 164 | cs5536_read(pdev, CAST, &cast); |
| 165 | cs5536_read(pdev, ETC, &etc); |
| 166 | |
| 167 | dtc &= ~(IDE_DRV_MASK << dshift); |
| 168 | dtc |= drv_timings[mode] << dshift; |
| 169 | |
| 170 | cast &= ~(IDE_CAST_DRV_MASK << cshift); |
| 171 | cast |= addr_timings[mode] << cshift; |
| 172 | |
| 173 | cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT); |
| 174 | cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT; |
| 175 | |
| 176 | etc &= ~(IDE_DRV_MASK << dshift); |
| 177 | etc |= IDE_ETC_NODMA << dshift; |
| 178 | |
| 179 | cs5536_write(pdev, DTC, dtc); |
| 180 | cs5536_write(pdev, CAST, cast); |
| 181 | cs5536_write(pdev, ETC, etc); |
| 182 | } |
| 183 | |
| 184 | /** |
| 185 | * cs5536_set_dmamode - DMA timing setup |
| 186 | * @ap: ATA interface |
| 187 | * @adev: Device being configured |
| 188 | * |
| 189 | */ |
| 190 | |
| 191 | static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev) |
| 192 | { |
| 193 | static const u8 udma_timings[6] = { |
| 194 | 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, |
| 195 | }; |
| 196 | |
| 197 | static const u8 mwdma_timings[3] = { |
| 198 | 0x67, 0x21, 0x20, |
| 199 | }; |
| 200 | |
| 201 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
| 202 | u32 dtc, etc; |
| 203 | int mode = adev->dma_mode; |
Martin K. Petersen | b6966a6 | 2008-02-13 01:41:44 -0500 | [diff] [blame] | 204 | int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; |
Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 205 | |
| 206 | if (mode >= XFER_UDMA_0) { |
| 207 | cs5536_read(pdev, ETC, &etc); |
| 208 | |
| 209 | etc &= ~(IDE_DRV_MASK << dshift); |
| 210 | etc |= udma_timings[mode - XFER_UDMA_0] << dshift; |
| 211 | |
| 212 | cs5536_write(pdev, ETC, etc); |
| 213 | } else { /* MWDMA */ |
| 214 | cs5536_read(pdev, DTC, &dtc); |
| 215 | |
| 216 | dtc &= ~(IDE_DRV_MASK << dshift); |
Bartlomiej Zolnierkiewicz | 80f6fd3 | 2007-10-17 01:23:43 +0200 | [diff] [blame] | 217 | dtc |= mwdma_timings[mode - XFER_MW_DMA_0] << dshift; |
Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 218 | |
| 219 | cs5536_write(pdev, DTC, dtc); |
| 220 | } |
| 221 | } |
| 222 | |
| 223 | static struct scsi_host_template cs5536_sht = { |
| 224 | .module = THIS_MODULE, |
| 225 | .name = DRV_NAME, |
| 226 | .ioctl = ata_scsi_ioctl, |
| 227 | .queuecommand = ata_scsi_queuecmd, |
| 228 | .can_queue = ATA_DEF_QUEUE, |
| 229 | .this_id = ATA_SHT_THIS_ID, |
| 230 | .sg_tablesize = LIBATA_MAX_PRD, |
| 231 | .cmd_per_lun = ATA_SHT_CMD_PER_LUN, |
| 232 | .emulated = ATA_SHT_EMULATED, |
| 233 | .use_clustering = ATA_SHT_USE_CLUSTERING, |
| 234 | .proc_name = DRV_NAME, |
| 235 | .dma_boundary = ATA_DMA_BOUNDARY, |
| 236 | .slave_configure = ata_scsi_slave_config, |
| 237 | .slave_destroy = ata_scsi_slave_destroy, |
| 238 | .bios_param = ata_std_bios_param, |
| 239 | }; |
| 240 | |
| 241 | static struct ata_port_operations cs5536_port_ops = { |
Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 242 | .set_piomode = cs5536_set_piomode, |
| 243 | .set_dmamode = cs5536_set_dmamode, |
| 244 | .mode_filter = ata_pci_default_filter, |
| 245 | |
| 246 | .tf_load = ata_tf_load, |
| 247 | .tf_read = ata_tf_read, |
| 248 | .check_status = ata_check_status, |
| 249 | .exec_command = ata_exec_command, |
| 250 | .dev_select = ata_std_dev_select, |
| 251 | |
| 252 | .freeze = ata_bmdma_freeze, |
| 253 | .thaw = ata_bmdma_thaw, |
| 254 | .error_handler = ata_bmdma_error_handler, |
| 255 | .post_internal_cmd = ata_bmdma_post_internal_cmd, |
| 256 | .cable_detect = cs5536_cable_detect, |
| 257 | |
| 258 | .bmdma_setup = ata_bmdma_setup, |
| 259 | .bmdma_start = ata_bmdma_start, |
| 260 | .bmdma_stop = ata_bmdma_stop, |
| 261 | .bmdma_status = ata_bmdma_status, |
| 262 | |
| 263 | .qc_prep = ata_qc_prep, |
| 264 | .qc_issue = ata_qc_issue_prot, |
| 265 | |
| 266 | .data_xfer = ata_data_xfer, |
| 267 | |
| 268 | .irq_handler = ata_interrupt, |
| 269 | .irq_clear = ata_bmdma_irq_clear, |
| 270 | .irq_on = ata_irq_on, |
Martin K. Petersen | 3957df6 | 2007-10-11 03:38:19 -0400 | [diff] [blame] | 271 | |
| 272 | .port_start = ata_port_start, |
| 273 | }; |
| 274 | |
| 275 | /** |
| 276 | * cs5536_init_one |
| 277 | * @dev: PCI device |
| 278 | * @id: Entry in match table |
| 279 | * |
| 280 | */ |
| 281 | |
| 282 | static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
| 283 | { |
| 284 | static const struct ata_port_info info = { |
| 285 | .sht = &cs5536_sht, |
| 286 | .flags = ATA_FLAG_SLAVE_POSS, |
| 287 | .pio_mask = 0x1f, |
| 288 | .mwdma_mask = 0x07, |
| 289 | .udma_mask = ATA_UDMA5, |
| 290 | .port_ops = &cs5536_port_ops, |
| 291 | }; |
| 292 | |
| 293 | const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; |
| 294 | u32 cfg; |
| 295 | |
| 296 | if (use_msr) |
| 297 | printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n"); |
| 298 | |
| 299 | cs5536_read(dev, CFG, &cfg); |
| 300 | |
| 301 | if ((cfg & IDE_CFG_CHANEN) == 0) { |
| 302 | printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); |
| 303 | return -ENODEV; |
| 304 | } |
| 305 | |
| 306 | return ata_pci_init_one(dev, ppi); |
| 307 | } |
| 308 | |
| 309 | static const struct pci_device_id cs5536[] = { |
| 310 | { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), }, |
| 311 | { }, |
| 312 | }; |
| 313 | |
| 314 | static struct pci_driver cs5536_pci_driver = { |
| 315 | .name = DRV_NAME, |
| 316 | .id_table = cs5536, |
| 317 | .probe = cs5536_init_one, |
| 318 | .remove = ata_pci_remove_one, |
| 319 | #ifdef CONFIG_PM |
| 320 | .suspend = ata_pci_device_suspend, |
| 321 | .resume = ata_pci_device_resume, |
| 322 | #endif |
| 323 | }; |
| 324 | |
| 325 | static int __init cs5536_init(void) |
| 326 | { |
| 327 | return pci_register_driver(&cs5536_pci_driver); |
| 328 | } |
| 329 | |
| 330 | static void __exit cs5536_exit(void) |
| 331 | { |
| 332 | pci_unregister_driver(&cs5536_pci_driver); |
| 333 | } |
| 334 | |
| 335 | MODULE_AUTHOR("Martin K. Petersen"); |
| 336 | MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller"); |
| 337 | MODULE_LICENSE("GPL"); |
| 338 | MODULE_DEVICE_TABLE(pci, cs5536); |
| 339 | MODULE_VERSION(DRV_VERSION); |
| 340 | module_param_named(msr, use_msr, int, 0644); |
| 341 | MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)"); |
| 342 | |
| 343 | module_init(cs5536_init); |
| 344 | module_exit(cs5536_exit); |