blob: e867b4ef96d1f09bcaec1fb05dc5d153d1d580bd [file] [log] [blame]
Pete Popov26a940e2005-09-15 08:03:12 +00001/*
2 * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005
3 *
4 * BRIEF MODULE DESCRIPTION
5 * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
6 *
7 * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
8 *
9 * This program is free software; you can redistribute it and/or modify it under
10 * the terms of the GNU General Public License as published by the Free Software
11 * Foundation; either version 2 of the License, or (at your option) any later
12 * version.
13 *
14 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
15 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
16 * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
17 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
18 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
19 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
20 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
21 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
22 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
23 * POSSIBILITY OF SUCH DAMAGE.
24 *
25 * You should have received a copy of the GNU General Public License along with
26 * this program; if not, write to the Free Software Foundation, Inc.,
27 * 675 Mass Ave, Cambridge, MA 02139, USA.
28 *
29 * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
30 * Interface and Linux Device Driver" Application Note.
31 */
32#include <linux/config.h>
33
34#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
35 #define DMA_WAIT_TIMEOUT 100
36 #define NUM_DESCRIPTORS PRD_ENTRIES
37#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
38 #define NUM_DESCRIPTORS 2
39#endif
40
41#ifndef AU1XXX_ATA_RQSIZE
42 #define AU1XXX_ATA_RQSIZE 128
43#endif
44
45/* Disable Burstable-Support for DBDMA */
46#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
47 #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
48#endif
49
50#ifdef CONFIG_PM
51/*
52* This will enable the device to be powered up when write() or read()
53* is called. If this is not defined, the driver will return -EBUSY.
54*/
55#define WAKE_ON_ACCESS 1
56
57typedef struct
58{
59 spinlock_t lock; /* Used to block on state transitions */
60 au1xxx_power_dev_t *dev; /* Power Managers device structure */
61 unsigned stopped; /* USed to signaling device is stopped */
62} pm_state;
63#endif
64
65
66typedef struct
67{
68 u32 tx_dev_id, rx_dev_id, target_dev_id;
69 u32 tx_chan, rx_chan;
70 void *tx_desc_head, *rx_desc_head;
71 ide_hwif_t *hwif;
72#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
73 ide_drive_t *drive;
74 u8 white_list, black_list;
75 struct dbdma_cmd *dma_table_cpu;
76 dma_addr_t dma_table_dma;
Pete Popov26a940e2005-09-15 08:03:12 +000077#endif
78 struct device *dev;
79 int irq;
80 u32 regbase;
81#ifdef CONFIG_PM
82 pm_state pm;
83#endif
84} _auide_hwif;
85
86#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
Pete Popov26a940e2005-09-15 08:03:12 +000087/* HD white list */
88static const struct drive_list_entry dma_white_list [] = {
89/*
90 * Hitachi
91 */
92 { "HITACHI_DK14FA-20" , "ALL" },
93 { "HTS726060M9AT00" , "ALL" },
94/*
95 * Maxtor
96 */
97 { "Maxtor 6E040L0" , "ALL" },
98 { "Maxtor 6Y080P0" , "ALL" },
99 { "Maxtor 6Y160P0" , "ALL" },
100/*
101 * Seagate
102 */
103 { "ST3120026A" , "ALL" },
104 { "ST320014A" , "ALL" },
105 { "ST94011A" , "ALL" },
106 { "ST340016A" , "ALL" },
107/*
108 * Western Digital
109 */
110 { "WDC WD400UE-00HCT0" , "ALL" },
111 { "WDC WD400JB-00JJC0" , "ALL" },
112 { NULL , NULL }
113};
114
115/* HD black list */
116static const struct drive_list_entry dma_black_list [] = {
117/*
118 * Western Digital
119 */
120 { "WDC WD100EB-00CGH0" , "ALL" },
121 { "WDC WD200BB-00AUA1" , "ALL" },
122 { "WDC AC24300L" , "ALL" },
123 { NULL , NULL }
124};
125#endif
126
127/* function prototyping */
128u8 auide_inb(unsigned long port);
129u16 auide_inw(unsigned long port);
130u32 auide_inl(unsigned long port);
131void auide_insw(unsigned long port, void *addr, u32 count);
132void auide_insl(unsigned long port, void *addr, u32 count);
133void auide_outb(u8 addr, unsigned long port);
134void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port);
135void auide_outw(u16 addr, unsigned long port);
136void auide_outl(u32 addr, unsigned long port);
137void auide_outsw(unsigned long port, void *addr, u32 count);
138void auide_outsl(unsigned long port, void *addr, u32 count);
139static void auide_tune_drive(ide_drive_t *drive, byte pio);
140static int auide_tune_chipset (ide_drive_t *drive, u8 speed);
141static int auide_ddma_init( _auide_hwif *auide );
142static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif);
143int __init auide_probe(void);
144
145#ifdef CONFIG_PM
146 int au1200ide_pm_callback( au1xxx_power_dev_t *dev,
147 au1xxx_request_t request, void *data);
148 static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev );
149 static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev );
150 static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev );
151 static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev );
152 static int au1xxxide_pm_access( au1xxx_power_dev_t *dev );
153 static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev );
154 static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev );
155#endif
156
157
158/*
159 * Multi-Word DMA + DbDMA functions
160 */
161#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
Pete Popov26a940e2005-09-15 08:03:12 +0000162 static int auide_build_sglist(ide_drive_t *drive, struct request *rq);
163 static int auide_build_dmatable(ide_drive_t *drive);
164 static int auide_dma_end(ide_drive_t *drive);
Pete Popov26a940e2005-09-15 08:03:12 +0000165 ide_startstop_t auide_dma_intr (ide_drive_t *drive);
166 static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command);
167 static int auide_dma_setup(ide_drive_t *drive);
168 static int auide_dma_check(ide_drive_t *drive);
169 static int auide_dma_test_irq(ide_drive_t *drive);
170 static int auide_dma_host_off(ide_drive_t *drive);
171 static int auide_dma_host_on(ide_drive_t *drive);
172 static int auide_dma_lostirq(ide_drive_t *drive);
173 static int auide_dma_on(ide_drive_t *drive);
174 static void auide_ddma_tx_callback(int irq, void *param,
175 struct pt_regs *regs);
176 static void auide_ddma_rx_callback(int irq, void *param,
177 struct pt_regs *regs);
178 static int auide_dma_off_quietly(ide_drive_t *drive);
Pete Popov26a940e2005-09-15 08:03:12 +0000179#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
180
181/*******************************************************************************
182* PIO Mode timing calculation : *
183* *
184* Static Bus Spec ATA Spec *
185* Tcsoe = t1 *
186* Toecs = t9 *
187* Twcs = t9 *
188* Tcsh = t2i | t2 *
189* Tcsoff = t2i | t2 *
190* Twp = t2 *
191* Tcsw = t1 *
192* Tpm = 0 *
193* Ta = t1+t2 *
194*******************************************************************************/
195
196#define TCSOE_MASK (0x07<<29)
197#define TOECS_MASK (0x07<<26)
198#define TWCS_MASK (0x07<<28)
199#define TCSH_MASK (0x0F<<24)
200#define TCSOFF_MASK (0x07<<20)
201#define TWP_MASK (0x3F<<14)
202#define TCSW_MASK (0x0F<<10)
203#define TPM_MASK (0x0F<<6)
204#define TA_MASK (0x3F<<0)
205#define TS_MASK (1<<8)
206
207/* Timing parameters PIO mode 0 */
208#define SBC_IDE_PIO0_TCSOE (0x04<<29)
209#define SBC_IDE_PIO0_TOECS (0x01<<26)
210#define SBC_IDE_PIO0_TWCS (0x02<<28)
211#define SBC_IDE_PIO0_TCSH (0x08<<24)
212#define SBC_IDE_PIO0_TCSOFF (0x07<<20)
213#define SBC_IDE_PIO0_TWP (0x10<<14)
214#define SBC_IDE_PIO0_TCSW (0x04<<10)
215#define SBC_IDE_PIO0_TPM (0x0<<6)
216#define SBC_IDE_PIO0_TA (0x15<<0)
217/* Timing parameters PIO mode 1 */
218#define SBC_IDE_PIO1_TCSOE (0x03<<29)
219#define SBC_IDE_PIO1_TOECS (0x01<<26)
220#define SBC_IDE_PIO1_TWCS (0x01<<28)
221#define SBC_IDE_PIO1_TCSH (0x06<<24)
222#define SBC_IDE_PIO1_TCSOFF (0x06<<20)
223#define SBC_IDE_PIO1_TWP (0x08<<14)
224#define SBC_IDE_PIO1_TCSW (0x03<<10)
225#define SBC_IDE_PIO1_TPM (0x00<<6)
226#define SBC_IDE_PIO1_TA (0x0B<<0)
227/* Timing parameters PIO mode 2 */
228#define SBC_IDE_PIO2_TCSOE (0x05<<29)
229#define SBC_IDE_PIO2_TOECS (0x01<<26)
230#define SBC_IDE_PIO2_TWCS (0x01<<28)
231#define SBC_IDE_PIO2_TCSH (0x07<<24)
232#define SBC_IDE_PIO2_TCSOFF (0x07<<20)
233#define SBC_IDE_PIO2_TWP (0x1F<<14)
234#define SBC_IDE_PIO2_TCSW (0x05<<10)
235#define SBC_IDE_PIO2_TPM (0x00<<6)
236#define SBC_IDE_PIO2_TA (0x22<<0)
237/* Timing parameters PIO mode 3 */
238#define SBC_IDE_PIO3_TCSOE (0x05<<29)
239#define SBC_IDE_PIO3_TOECS (0x01<<26)
240#define SBC_IDE_PIO3_TWCS (0x01<<28)
241#define SBC_IDE_PIO3_TCSH (0x0D<<24)
242#define SBC_IDE_PIO3_TCSOFF (0x0D<<20)
243#define SBC_IDE_PIO3_TWP (0x15<<14)
244#define SBC_IDE_PIO3_TCSW (0x05<<10)
245#define SBC_IDE_PIO3_TPM (0x00<<6)
246#define SBC_IDE_PIO3_TA (0x1A<<0)
247/* Timing parameters PIO mode 4 */
248#define SBC_IDE_PIO4_TCSOE (0x04<<29)
249#define SBC_IDE_PIO4_TOECS (0x01<<26)
250#define SBC_IDE_PIO4_TWCS (0x01<<28)
251#define SBC_IDE_PIO4_TCSH (0x04<<24)
252#define SBC_IDE_PIO4_TCSOFF (0x04<<20)
253#define SBC_IDE_PIO4_TWP (0x0D<<14)
254#define SBC_IDE_PIO4_TCSW (0x03<<10)
255#define SBC_IDE_PIO4_TPM (0x00<<6)
256#define SBC_IDE_PIO4_TA (0x12<<0)
257/* Timing parameters MDMA mode 0 */
258#define SBC_IDE_MDMA0_TCSOE (0x03<<29)
259#define SBC_IDE_MDMA0_TOECS (0x01<<26)
260#define SBC_IDE_MDMA0_TWCS (0x01<<28)
261#define SBC_IDE_MDMA0_TCSH (0x07<<24)
262#define SBC_IDE_MDMA0_TCSOFF (0x07<<20)
263#define SBC_IDE_MDMA0_TWP (0x0C<<14)
264#define SBC_IDE_MDMA0_TCSW (0x03<<10)
265#define SBC_IDE_MDMA0_TPM (0x00<<6)
266#define SBC_IDE_MDMA0_TA (0x0F<<0)
267/* Timing parameters MDMA mode 1 */
268#define SBC_IDE_MDMA1_TCSOE (0x05<<29)
269#define SBC_IDE_MDMA1_TOECS (0x01<<26)
270#define SBC_IDE_MDMA1_TWCS (0x01<<28)
271#define SBC_IDE_MDMA1_TCSH (0x05<<24)
272#define SBC_IDE_MDMA1_TCSOFF (0x05<<20)
273#define SBC_IDE_MDMA1_TWP (0x0F<<14)
274#define SBC_IDE_MDMA1_TCSW (0x05<<10)
275#define SBC_IDE_MDMA1_TPM (0x00<<6)
276#define SBC_IDE_MDMA1_TA (0x15<<0)
277/* Timing parameters MDMA mode 2 */
278#define SBC_IDE_MDMA2_TCSOE (0x04<<29)
279#define SBC_IDE_MDMA2_TOECS (0x01<<26)
280#define SBC_IDE_MDMA2_TWCS (0x01<<28)
281#define SBC_IDE_MDMA2_TCSH (0x04<<24)
282#define SBC_IDE_MDMA2_TCSOFF (0x04<<20)
283#define SBC_IDE_MDMA2_TWP (0x0D<<14)
284#define SBC_IDE_MDMA2_TCSW (0x04<<10)
285#define SBC_IDE_MDMA2_TPM (0x00<<6)
286#define SBC_IDE_MDMA2_TA (0x12<<0)
287
Jordan Crouse8f29e652005-12-15 02:17:46 +0100288#define SBC_IDE_TIMING(mode) \
289 SBC_IDE_##mode##_TWCS | \
290 SBC_IDE_##mode##_TCSH | \
291 SBC_IDE_##mode##_TCSOFF | \
292 SBC_IDE_##mode##_TWP | \
293 SBC_IDE_##mode##_TCSW | \
294 SBC_IDE_##mode##_TPM | \
295 SBC_IDE_##mode##_TA