blob: 303e4f9a79d19998452760a913828a64c5773345 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001config H8300
2 bool
3 default y
Sam Ravnborgec7748b2008-02-09 10:46:40 +01004 select HAVE_IDE
Thomas Gleixner51f3f152011-01-19 12:26:32 +01005 select HAVE_GENERIC_HARDIRQS
Fengguang Wud95bfe42012-12-18 14:21:29 -08006 select GENERIC_ATOMIC64
Catalin Marinasaf1839e2012-10-08 16:28:08 -07007 select HAVE_UID16
Stephen Rothwell4febd952013-03-07 15:48:16 +11008 select VIRT_TO_BUS
Will Deaconc1d7e012012-07-30 14:42:46 -07009 select ARCH_WANT_IPC_PARSE_VERSION
Thomas Gleixner9f7b2182011-03-24 19:15:36 +010010 select GENERIC_IRQ_SHOW
Ben Hutchings9f13a1f2012-01-10 03:04:32 +000011 select GENERIC_CPU_DEVICES
David Howells786d35d2012-09-28 14:31:03 +093012 select MODULES_USE_ELF_RELA
Al Virob407e622012-12-25 16:27:07 -050013 select OLD_SIGSUSPEND3
Al Virob0375742012-12-25 19:29:41 -050014 select OLD_SIGACTION
Rusty Russellb92021b2013-03-15 15:04:17 +103015 select HAVE_UNDERSCORE_SYMBOL_PREFIX
Alan Jenkins9e1b9b82009-11-07 21:03:54 +000016
Linus Torvalds1da177e2005-04-16 15:20:36 -070017config MMU
18 bool
19 default n
20
21config SWAP
22 bool
23 default n
24
Christoph Lameter66701b12007-02-10 01:43:09 -080025config ZONE_DMA
26 bool
27 default y
28
Linus Torvalds1da177e2005-04-16 15:20:36 -070029config FPU
30 bool
31 default n
32
Linus Torvalds1da177e2005-04-16 15:20:36 -070033config RWSEM_GENERIC_SPINLOCK
34 bool
35 default y
36
37config RWSEM_XCHGADD_ALGORITHM
38 bool
39 default n
40
David Howellsf0d1b0b2006-12-08 02:37:49 -080041config ARCH_HAS_ILOG2_U32
42 bool
43 default n
44
45config ARCH_HAS_ILOG2_U64
46 bool
47 default n
48
Akinobu Mitaf6e02132006-03-26 01:39:23 -080049config GENERIC_HWEIGHT
50 bool
51 default y
52
Linus Torvalds1da177e2005-04-16 15:20:36 -070053config GENERIC_CALIBRATE_DELAY
54 bool
55 default y
56
Yoshinori Sato9791af52008-10-15 22:01:17 -070057config GENERIC_BUG
58 bool
59 depends on BUG
60
Ingo Molnar06027bd2006-02-14 13:53:15 -080061config TIME_LOW_RES
62 bool
63 default y
64
Al Viro5ea81762007-02-11 15:41:31 +000065config NO_IOPORT
66 def_bool y
67
Dan Williams1b0fac42007-07-15 23:40:26 -070068config NO_DMA
69 def_bool y
70
Linus Torvalds1da177e2005-04-16 15:20:36 -070071config ISA
72 bool
73 default y
74
75config PCI
76 bool
77 default n
78
H. Peter Anvinbdc80782008-02-08 04:21:26 -080079config HZ
80 int
81 default 100
82
Linus Torvalds1da177e2005-04-16 15:20:36 -070083source "init/Kconfig"
84
Matt Helsleydc52ddc2008-10-18 20:27:21 -070085source "kernel/Kconfig.freezer"
86
Linus Torvalds1da177e2005-04-16 15:20:36 -070087source "arch/h8300/Kconfig.cpu"
88
89menu "Executable file formats"
90
91source "fs/Kconfig.binfmt"
92
93endmenu
94
Sam Ravnborgd5950b42005-07-11 21:03:49 -070095source "net/Kconfig"
96
Linus Torvalds1da177e2005-04-16 15:20:36 -070097source "drivers/base/Kconfig"
98
99source "drivers/mtd/Kconfig"
100
101source "drivers/block/Kconfig"
102
103source "drivers/ide/Kconfig"
104
105source "arch/h8300/Kconfig.ide"
106
Sam Ravnborgd5950b42005-07-11 21:03:49 -0700107source "drivers/net/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700108
109#
110# input - input/joystick depends on it. As does USB.
111#
112source "drivers/input/Kconfig"
113
114menu "Character devices"
115
116config VT
117 bool "Virtual terminal"
118 ---help---
119 If you say Y here, you will get support for terminal devices with
120 display and keyboard devices. These are called "virtual" because you
121 can run several virtual terminals (also called virtual consoles) on
122 one physical terminal. This is rather useful, for example one
123 virtual terminal can collect system messages and warnings, another
124 one can be used for a text-mode user session, and a third could run
125 an X session, all in parallel. Switching between virtual terminals
126 is done with certain key combinations, usually Alt-<function key>.
127
128 The setterm command ("man setterm") can be used to change the
129 properties (such as colors or beeping) of a virtual terminal. The
130 man page console_codes(4) ("man console_codes") contains the special
131 character sequences that can be used to change those properties
132 directly. The fonts used on virtual terminals can be changed with
133 the setfont ("man setfont") command and the key bindings are defined
134 with the loadkeys ("man loadkeys") command.
135
136 You need at least one virtual terminal device in order to make use
137 of your keyboard and monitor. Therefore, only people configuring an
138 embedded system would want to say N here in order to save some
139 memory; the only way to log into such a system is then via a serial
140 or network connection.
141
142 If unsure, say Y, or else you won't be able to do much with your new
143 shiny Linux system :-)
144
145config VT_CONSOLE
146 bool "Support for console on virtual terminal"
147 depends on VT
148 ---help---
149 The system console is the device which receives all kernel messages
150 and warnings and which allows logins in single user mode. If you
151 answer Y here, a virtual terminal (the device used to interact with
152 a physical terminal) can be used as system console. This is the most
153 common mode of operations, so you should say Y here unless you want
154 the kernel messages be output only to a serial port (in which case
155 you should say Y to "Console on serial port", below).
156
157 If you do say Y here, by default the currently visible virtual
158 terminal (/dev/tty0) will be used as system console. You can change
159 that with a kernel command line option such as "console=tty3" which
160 would use the third virtual terminal as system console. (Try "man
161 bootparam" or see the documentation of your boot loader (lilo or
162 loadlin) about how to pass options to the kernel at boot time.)
163
164 If unsure, say Y.
165
166config HW_CONSOLE
167 bool
Paul Bolle75330692011-10-12 14:25:31 +0200168 depends on VT
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169 default y
170
171comment "Unix98 PTY support"
172
173config UNIX98_PTYS
174 bool "Unix98 PTY support"
175 ---help---
176 A pseudo terminal (PTY) is a software device consisting of two
177 halves: a master and a slave. The slave device behaves identical to
178 a physical terminal; the master device is used by a process to
179 read data from and write data to the slave, thereby emulating a
180 terminal. Typical programs for the master side are telnet servers
181 and xterms.
182
183 Linux has traditionally used the BSD-like names /dev/ptyxx for
184 masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
185 has a number of problems. The GNU C library glibc 2.1 and later,
186 however, supports the Unix98 naming standard: in order to acquire a
187 pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
188 terminal is then made available to the process and the pseudo
189 terminal slave can be accessed as /dev/pts/<number>. What was
190 traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
191
192 The entries in /dev/pts/ are created on the fly by a virtual
193 file system; therefore, if you say Y here you should say Y to
194 "/dev/pts file system for Unix98 PTYs" as well.
195
196 If you want to say Y here, you need to have the C library glibc 2.1
197 or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
198 Read the instructions in <file:Documentation/Changes> pertaining to
199 pseudo terminals. It's safe to say N.
200
Linus Torvalds1da177e2005-04-16 15:20:36 -0700201source "drivers/char/pcmcia/Kconfig"
202
Paul Bollea4a77b12011-10-11 13:23:29 +0200203source "drivers/tty/serial/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700204
205source "drivers/i2c/Kconfig"
206
Jean Delvaread2f9312005-07-02 18:15:49 +0200207source "drivers/hwmon/Kconfig"
208
Linus Torvalds1da177e2005-04-16 15:20:36 -0700209source "drivers/usb/Kconfig"
210
Greg Kroah-Hartman2f86c3e2008-09-17 16:34:11 +0100211source "drivers/uwb/Kconfig"
212
Linus Torvalds1da177e2005-04-16 15:20:36 -0700213endmenu
214
F. Duncan M. Haldane6e38a2b2008-11-07 18:17:51 -0500215source "drivers/staging/Kconfig"
216
Linus Torvalds1da177e2005-04-16 15:20:36 -0700217source "fs/Kconfig"
218
Linus Torvalds1da177e2005-04-16 15:20:36 -0700219source "arch/h8300/Kconfig.debug"
220
221source "security/Kconfig"
222
223source "crypto/Kconfig"
224
225source "lib/Kconfig"