blob: a93c525475c6e3945eb9cdc2d5a0db4203c8fb69 [file] [log] [blame]
Michael Downey99f83c92005-06-27 11:48:26 -06001/*
2 * keyspan_remote: USB driver for the Keyspan DMR
3 *
4 * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation, version 2.
9 *
10 * This driver has been put together with the support of Innosys, Inc.
11 * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
12 */
13
Michael Downey99f83c92005-06-27 11:48:26 -060014#include <linux/kernel.h>
15#include <linux/errno.h>
16#include <linux/init.h>
17#include <linux/slab.h>
18#include <linux/module.h>
David Brownellae0dadc2006-06-13 10:04:34 -070019#include <linux/usb/input.h>
Michael Downey99f83c92005-06-27 11:48:26 -060020
21#define DRIVER_VERSION "v0.1"
22#define DRIVER_AUTHOR "Michael Downey <downey@zymeta.com>"
23#define DRIVER_DESC "Driver for the USB Keyspan remote control."
24#define DRIVER_LICENSE "GPL"
25
26/* Parameters that can be passed to the driver. */
27static int debug;
28module_param(debug, int, 0444);
29MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
30
31/* Vendor and product ids */
32#define USB_KEYSPAN_VENDOR_ID 0x06CD
33#define USB_KEYSPAN_PRODUCT_UIA11 0x0202
34
35/* Defines for converting the data from the remote. */
36#define ZERO 0x18
37#define ZERO_MASK 0x1F /* 5 bits for a 0 */
38#define ONE 0x3C
39#define ONE_MASK 0x3F /* 6 bits for a 1 */
40#define SYNC 0x3F80
41#define SYNC_MASK 0x3FFF /* 14 bits for a SYNC sequence */
42#define STOP 0x00
43#define STOP_MASK 0x1F /* 5 bits for the STOP sequence */
44#define GAP 0xFF
45
46#define RECV_SIZE 8 /* The UIA-11 type have a 8 byte limit. */
47
Michael Downey99f83c92005-06-27 11:48:26 -060048/*
49 * Table that maps the 31 possible keycodes to input keys.
50 * Currently there are 15 and 17 button models so RESERVED codes
51 * are blank areas in the mapping.
52 */
Dmitry Torokhov1953ea22007-11-04 00:41:24 -040053static const unsigned short keyspan_key_table[] = {
Michael Downey99f83c92005-06-27 11:48:26 -060054 KEY_RESERVED, /* 0 is just a place holder. */
55 KEY_RESERVED,
56 KEY_STOP,
57 KEY_PLAYCD,
58 KEY_RESERVED,
59 KEY_PREVIOUSSONG,
60 KEY_REWIND,
61 KEY_FORWARD,
62 KEY_NEXTSONG,
63 KEY_RESERVED,
64 KEY_RESERVED,
65 KEY_RESERVED,
66 KEY_PAUSE,
67 KEY_VOLUMEUP,
68 KEY_RESERVED,
69 KEY_RESERVED,
70 KEY_RESERVED,
71 KEY_VOLUMEDOWN,
72 KEY_RESERVED,
73 KEY_UP,
74 KEY_RESERVED,
75 KEY_MUTE,
76 KEY_LEFT,
77 KEY_ENTER,
78 KEY_RIGHT,
79 KEY_RESERVED,
80 KEY_RESERVED,
81 KEY_DOWN,
82 KEY_RESERVED,
83 KEY_KPASTERISK,
84 KEY_RESERVED,
85 KEY_MENU
86};
87
Dmitry Torokhov1953ea22007-11-04 00:41:24 -040088/* table of devices that work with this driver */
89static struct usb_device_id keyspan_table[] = {
90 { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
91 { } /* Terminating entry */
92};
93
94/* Structure to store all the real stuff that a remote sends to us. */
95struct keyspan_message {
96 u16 system;
97 u8 button;
98 u8 toggle;
99};
100
101/* Structure used for all the bit testing magic needed to be done. */
102struct bit_tester {
103 u32 tester;
104 int len;
105 int pos;
106 int bits_left;
107 u8 buffer[32];
108};
109
110/* Structure to hold all of our driver specific stuff */
111struct usb_keyspan {
112 char name[128];
113 char phys[64];
114 unsigned short keymap[ARRAY_SIZE(keyspan_key_table)];
115 struct usb_device *udev;
116 struct input_dev *input;
117 struct usb_interface *interface;
118 struct usb_endpoint_descriptor *in_endpoint;
119 struct urb* irq_urb;
120 int open;
121 dma_addr_t in_dma;
122 unsigned char *in_buffer;
123
124 /* variables used to parse messages from remote. */
125 struct bit_tester data;
126 int stage;
127 int toggle;
128};
129
Michael Downey99f83c92005-06-27 11:48:26 -0600130static struct usb_driver keyspan_driver;
131
132/*
133 * Debug routine that prints out what we've received from the remote.
134 */
135static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
136{
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500137 char codes[4 * RECV_SIZE];
Michael Downey99f83c92005-06-27 11:48:26 -0600138 int i;
139
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500140 for (i = 0; i < RECV_SIZE; i++)
141 snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
Michael Downey99f83c92005-06-27 11:48:26 -0600142
143 dev_info(&dev->udev->dev, "%s\n", codes);
144}
145
146/*
147 * Routine that manages the bit_tester structure. It makes sure that there are
148 * at least bits_needed bits loaded into the tester.
149 */
150static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
151{
152 if (dev->data.bits_left >= bits_needed)
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500153 return 0;
Michael Downey99f83c92005-06-27 11:48:26 -0600154
155 /*
156 * Somehow we've missed the last message. The message will be repeated
157 * though so it's not too big a deal
158 */
159 if (dev->data.pos >= dev->data.len) {
Greg Kroah-Hartman654f3112005-11-17 09:48:09 -0800160 dev_dbg(&dev->udev->dev,
161 "%s - Error ran out of data. pos: %d, len: %d\n",
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400162 __func__, dev->data.pos, dev->data.len);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500163 return -1;
Michael Downey99f83c92005-06-27 11:48:26 -0600164 }
165
166 /* Load as much as we can into the tester. */
167 while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
168 (dev->data.pos < dev->data.len)) {
169 dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
170 dev->data.bits_left += 8;
171 }
172
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500173 return 0;
Michael Downey99f83c92005-06-27 11:48:26 -0600174}
175
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400176static void keyspan_report_button(struct usb_keyspan *remote, int button, int press)
177{
178 struct input_dev *input = remote->input;
179
180 input_event(input, EV_MSC, MSC_SCAN, button);
181 input_report_key(input, remote->keymap[button], press);
182 input_sync(input);
183}
184
Michael Downey99f83c92005-06-27 11:48:26 -0600185/*
186 * Routine that handles all the logic needed to parse out the message from the remote.
187 */
David Howells7d12e782006-10-05 14:55:46 +0100188static void keyspan_check_data(struct usb_keyspan *remote)
Michael Downey99f83c92005-06-27 11:48:26 -0600189{
190 int i;
191 int found = 0;
192 struct keyspan_message message;
193
194 switch(remote->stage) {
195 case 0:
196 /*
197 * In stage 0 we want to find the start of a message. The remote sends a 0xFF as filler.
198 * So the first byte that isn't a FF should be the start of a new message.
199 */
200 for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
201
202 if (i < RECV_SIZE) {
203 memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
204 remote->data.len = RECV_SIZE;
205 remote->data.pos = 0;
206 remote->data.tester = 0;
207 remote->data.bits_left = 0;
208 remote->stage = 1;
209 }
210 break;
211
212 case 1:
213 /*
214 * Stage 1 we should have 16 bytes and should be able to detect a
215 * SYNC. The SYNC is 14 bits, 7 0's and then 7 1's.
216 */
217 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
218 remote->data.len += RECV_SIZE;
219
220 found = 0;
221 while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
222 for (i = 0; i < 8; ++i) {
223 if (keyspan_load_tester(remote, 14) != 0) {
224 remote->stage = 0;
225 return;
226 }
227
228 if ((remote->data.tester & SYNC_MASK) == SYNC) {
229 remote->data.tester = remote->data.tester >> 14;
230 remote->data.bits_left -= 14;
231 found = 1;
232 break;
233 } else {
234 remote->data.tester = remote->data.tester >> 1;
235 --remote->data.bits_left;
236 }
237 }
238 }
239
240 if (!found) {
241 remote->stage = 0;
242 remote->data.len = 0;
243 } else {
244 remote->stage = 2;
245 }
246 break;
247
248 case 2:
249 /*
250 * Stage 2 we should have 24 bytes which will be enough for a full
251 * message. We need to parse out the system code, button code,
252 * toggle code, and stop.
253 */
254 memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
255 remote->data.len += RECV_SIZE;
256
257 message.system = 0;
258 for (i = 0; i < 9; i++) {
259 keyspan_load_tester(remote, 6);
260
261 if ((remote->data.tester & ZERO_MASK) == ZERO) {
262 message.system = message.system << 1;
263 remote->data.tester = remote->data.tester >> 5;
264 remote->data.bits_left -= 5;
265 } else if ((remote->data.tester & ONE_MASK) == ONE) {
266 message.system = (message.system << 1) + 1;
267 remote->data.tester = remote->data.tester >> 6;
268 remote->data.bits_left -= 6;
269 } else {
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400270 err("%s - Unknown sequence found in system data.\n", __func__);
Michael Downey99f83c92005-06-27 11:48:26 -0600271 remote->stage = 0;
272 return;
273 }
274 }
275
276 message.button = 0;
277 for (i = 0; i < 5; i++) {
278 keyspan_load_tester(remote, 6);
279
280 if ((remote->data.tester & ZERO_MASK) == ZERO) {
281 message.button = message.button << 1;
282 remote->data.tester = remote->data.tester >> 5;
283 remote->data.bits_left -= 5;
284 } else if ((remote->data.tester & ONE_MASK) == ONE) {
285 message.button = (message.button << 1) + 1;
286 remote->data.tester = remote->data.tester >> 6;
287 remote->data.bits_left -= 6;
288 } else {
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400289 err("%s - Unknown sequence found in button data.\n", __func__);
Michael Downey99f83c92005-06-27 11:48:26 -0600290 remote->stage = 0;
291 return;
292 }
293 }
294
295 keyspan_load_tester(remote, 6);
296 if ((remote->data.tester & ZERO_MASK) == ZERO) {
297 message.toggle = 0;
298 remote->data.tester = remote->data.tester >> 5;
299 remote->data.bits_left -= 5;
300 } else if ((remote->data.tester & ONE_MASK) == ONE) {
301 message.toggle = 1;
302 remote->data.tester = remote->data.tester >> 6;
303 remote->data.bits_left -= 6;
304 } else {
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400305 err("%s - Error in message, invalid toggle.\n", __func__);
Michael Downey01e89502006-04-03 08:58:07 -0600306 remote->stage = 0;
307 return;
Michael Downey99f83c92005-06-27 11:48:26 -0600308 }
309
310 keyspan_load_tester(remote, 5);
311 if ((remote->data.tester & STOP_MASK) == STOP) {
312 remote->data.tester = remote->data.tester >> 5;
313 remote->data.bits_left -= 5;
314 } else {
315 err("Bad message recieved, no stop bit found.\n");
316 }
317
Greg Kroah-Hartman654f3112005-11-17 09:48:09 -0800318 dev_dbg(&remote->udev->dev,
Michael Downey99f83c92005-06-27 11:48:26 -0600319 "%s found valid message: system: %d, button: %d, toggle: %d\n",
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400320 __func__, message.system, message.button, message.toggle);
Michael Downey99f83c92005-06-27 11:48:26 -0600321
322 if (message.toggle != remote->toggle) {
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400323 keyspan_report_button(remote, message.button, 1);
324 keyspan_report_button(remote, message.button, 0);
Michael Downey99f83c92005-06-27 11:48:26 -0600325 remote->toggle = message.toggle;
326 }
327
328 remote->stage = 0;
329 break;
330 }
331}
332
333/*
334 * Routine for sending all the initialization messages to the remote.
335 */
336static int keyspan_setup(struct usb_device* dev)
337{
338 int retval = 0;
339
340 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
341 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
342 if (retval) {
343 dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400344 __func__, retval);
Michael Downey99f83c92005-06-27 11:48:26 -0600345 return(retval);
346 }
347
348 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
349 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
350 if (retval) {
351 dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400352 __func__, retval);
Michael Downey99f83c92005-06-27 11:48:26 -0600353 return(retval);
354 }
355
356 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
357 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
358 if (retval) {
359 dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400360 __func__, retval);
Michael Downey99f83c92005-06-27 11:48:26 -0600361 return(retval);
362 }
363
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400364 dev_dbg(&dev->dev, "%s - Setup complete.\n", __func__);
Michael Downey99f83c92005-06-27 11:48:26 -0600365 return(retval);
366}
367
368/*
369 * Routine used to handle a new message that has come in.
370 */
David Howells7d12e782006-10-05 14:55:46 +0100371static void keyspan_irq_recv(struct urb *urb)
Michael Downey99f83c92005-06-27 11:48:26 -0600372{
373 struct usb_keyspan *dev = urb->context;
374 int retval;
375
376 /* Check our status in case we need to bail out early. */
377 switch (urb->status) {
378 case 0:
379 break;
380
381 /* Device went away so don't keep trying to read from it. */
382 case -ECONNRESET:
383 case -ENOENT:
384 case -ESHUTDOWN:
385 return;
386
387 default:
388 goto resubmit;
389 break;
390 }
391
392 if (debug)
393 keyspan_print(dev);
394
David Howells7d12e782006-10-05 14:55:46 +0100395 keyspan_check_data(dev);
Michael Downey99f83c92005-06-27 11:48:26 -0600396
397resubmit:
398 retval = usb_submit_urb(urb, GFP_ATOMIC);
399 if (retval)
Harvey Harrisonea3e6c52008-05-05 11:36:18 -0400400 err ("%s - usb_submit_urb failed with result: %d", __func__, retval);
Michael Downey99f83c92005-06-27 11:48:26 -0600401}
402
403static int keyspan_open(struct input_dev *dev)
404{
Dmitry Torokhov7791bda2007-04-12 01:34:39 -0400405 struct usb_keyspan *remote = input_get_drvdata(dev);
Michael Downey99f83c92005-06-27 11:48:26 -0600406
Michael Downey99f83c92005-06-27 11:48:26 -0600407 remote->irq_urb->dev = remote->udev;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500408 if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
Michael Downey99f83c92005-06-27 11:48:26 -0600409 return -EIO;
Michael Downey99f83c92005-06-27 11:48:26 -0600410
411 return 0;
412}
413
414static void keyspan_close(struct input_dev *dev)
415{
Dmitry Torokhov7791bda2007-04-12 01:34:39 -0400416 struct usb_keyspan *remote = input_get_drvdata(dev);
Michael Downey99f83c92005-06-27 11:48:26 -0600417
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500418 usb_kill_urb(remote->irq_urb);
419}
420
421static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
422{
423
424 struct usb_endpoint_descriptor *endpoint;
425 int i;
426
427 for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
428 endpoint = &iface->endpoint[i].desc;
429
Luiz Fernando N. Capitulino96723192006-09-27 11:58:53 -0700430 if (usb_endpoint_is_int_in(endpoint)) {
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500431 /* we found our interrupt in endpoint */
432 return endpoint;
433 }
434 }
435
436 return NULL;
Michael Downey99f83c92005-06-27 11:48:26 -0600437}
438
439/*
440 * Routine that sets up the driver to handle a specific USB device detected on the bus.
441 */
442static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
443{
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500444 struct usb_device *udev = interface_to_usbdev(interface);
Michael Downey99f83c92005-06-27 11:48:26 -0600445 struct usb_endpoint_descriptor *endpoint;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500446 struct usb_keyspan *remote;
447 struct input_dev *input_dev;
Dmitry Torokhov50141862007-04-12 01:33:39 -0400448 int i, error;
Michael Downey99f83c92005-06-27 11:48:26 -0600449
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500450 endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
451 if (!endpoint)
452 return -ENODEV;
453
454 remote = kzalloc(sizeof(*remote), GFP_KERNEL);
455 input_dev = input_allocate_device();
456 if (!remote || !input_dev) {
Dmitry Torokhov50141862007-04-12 01:33:39 -0400457 error = -ENOMEM;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500458 goto fail1;
Michael Downey99f83c92005-06-27 11:48:26 -0600459 }
Michael Downey99f83c92005-06-27 11:48:26 -0600460
461 remote->udev = udev;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500462 remote->input = input_dev;
Michael Downey99f83c92005-06-27 11:48:26 -0600463 remote->interface = interface;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500464 remote->in_endpoint = endpoint;
Michael Downey99f83c92005-06-27 11:48:26 -0600465 remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */
466
Daniel Mack997ea582010-04-12 13:17:25 +0200467 remote->in_buffer = usb_alloc_coherent(udev, RECV_SIZE, GFP_ATOMIC, &remote->in_dma);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500468 if (!remote->in_buffer) {
Dmitry Torokhov50141862007-04-12 01:33:39 -0400469 error = -ENOMEM;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500470 goto fail1;
Michael Downey99f83c92005-06-27 11:48:26 -0600471 }
472
473 remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
474 if (!remote->irq_urb) {
Dmitry Torokhov50141862007-04-12 01:33:39 -0400475 error = -ENOMEM;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500476 goto fail2;
Michael Downey99f83c92005-06-27 11:48:26 -0600477 }
478
Dmitry Torokhov50141862007-04-12 01:33:39 -0400479 error = keyspan_setup(udev);
480 if (error) {
481 error = -ENODEV;
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500482 goto fail3;
Michael Downey99f83c92005-06-27 11:48:26 -0600483 }
484
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500485 if (udev->manufacturer)
486 strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
487
488 if (udev->product) {
489 if (udev->manufacturer)
490 strlcat(remote->name, " ", sizeof(remote->name));
491 strlcat(remote->name, udev->product, sizeof(remote->name));
Michael Downey99f83c92005-06-27 11:48:26 -0600492 }
493
Michael Downey99f83c92005-06-27 11:48:26 -0600494 if (!strlen(remote->name))
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500495 snprintf(remote->name, sizeof(remote->name),
496 "USB Keyspan Remote %04x:%04x",
497 le16_to_cpu(udev->descriptor.idVendor),
498 le16_to_cpu(udev->descriptor.idProduct));
Michael Downey99f83c92005-06-27 11:48:26 -0600499
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500500 usb_make_path(udev, remote->phys, sizeof(remote->phys));
501 strlcat(remote->phys, "/input0", sizeof(remote->phys));
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400502 memcpy(remote->keymap, keyspan_key_table, sizeof(remote->keymap));
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500503
504 input_dev->name = remote->name;
505 input_dev->phys = remote->phys;
506 usb_to_input_id(udev, &input_dev->id);
Dmitry Torokhovc0f82d52007-04-12 01:35:03 -0400507 input_dev->dev.parent = &interface->dev;
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400508 input_dev->keycode = remote->keymap;
509 input_dev->keycodesize = sizeof(unsigned short);
510 input_dev->keycodemax = ARRAY_SIZE(remote->keymap);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500511
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400512 input_set_capability(input_dev, EV_MSC, MSC_SCAN);
513 __set_bit(EV_KEY, input_dev->evbit);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500514 for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400515 __set_bit(keyspan_key_table[i], input_dev->keybit);
516 __clear_bit(KEY_RESERVED, input_dev->keybit);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500517
Dmitry Torokhov7791bda2007-04-12 01:34:39 -0400518 input_set_drvdata(input_dev, remote);
519
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500520 input_dev->open = keyspan_open;
521 input_dev->close = keyspan_close;
Michael Downey99f83c92005-06-27 11:48:26 -0600522
523 /*
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400524 * Initialize the URB to access the device.
525 * The urb gets sent to the device in keyspan_open()
Michael Downey99f83c92005-06-27 11:48:26 -0600526 */
527 usb_fill_int_urb(remote->irq_urb,
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400528 remote->udev,
529 usb_rcvintpipe(remote->udev, endpoint->bEndpointAddress),
Michael Downey99f83c92005-06-27 11:48:26 -0600530 remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
Dmitry Torokhov1953ea22007-11-04 00:41:24 -0400531 endpoint->bInterval);
Michael Downey99f83c92005-06-27 11:48:26 -0600532 remote->irq_urb->transfer_dma = remote->in_dma;
533 remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
534
535 /* we can register the device now, as it is ready */
Dmitry Torokhov50141862007-04-12 01:33:39 -0400536 error = input_register_device(remote->input);
537 if (error)
538 goto fail3;
Michael Downey99f83c92005-06-27 11:48:26 -0600539
540 /* save our data pointer in this interface device */
541 usb_set_intfdata(interface, remote);
542
Michael Downey99f83c92005-06-27 11:48:26 -0600543 return 0;
544
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500545 fail3: usb_free_urb(remote->irq_urb);
Daniel Mack997ea582010-04-12 13:17:25 +0200546 fail2: usb_free_coherent(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500547 fail1: kfree(remote);
548 input_free_device(input_dev);
Michael Downey99f83c92005-06-27 11:48:26 -0600549
Dmitry Torokhov50141862007-04-12 01:33:39 -0400550 return error;
Michael Downey99f83c92005-06-27 11:48:26 -0600551}
552
553/*
554 * Routine called when a device is disconnected from the USB.
555 */
556static void keyspan_disconnect(struct usb_interface *interface)
557{
558 struct usb_keyspan *remote;
559
Michael Downey99f83c92005-06-27 11:48:26 -0600560 remote = usb_get_intfdata(interface);
561 usb_set_intfdata(interface, NULL);
562
563 if (remote) { /* We have a valid driver structure so clean up everything we allocated. */
Dmitry Torokhovc5b7c7c2005-09-15 02:01:47 -0500564 input_unregister_device(remote->input);
Michael Downey99f83c92005-06-27 11:48:26 -0600565 usb_kill_urb(remote->irq_urb);
566 usb_free_urb(remote->irq_urb);
Daniel Mack997ea582010-04-12 13:17:25 +0200567 usb_free_coherent(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
Michael Downey99f83c92005-06-27 11:48:26 -0600568 kfree(remote);
569 }
Michael Downey99f83c92005-06-27 11:48:26 -0600570}
571
572/*
573 * Standard driver set up sections
574 */
575static struct usb_driver keyspan_driver =
576{
Michael Downey99f83c92005-06-27 11:48:26 -0600577 .name = "keyspan_remote",
578 .probe = keyspan_probe,
579 .disconnect = keyspan_disconnect,
580 .id_table = keyspan_table
581};
582
583static int __init usb_keyspan_init(void)
584{
585 int result;
586
587 /* register this driver with the USB subsystem */
588 result = usb_register(&keyspan_driver);
589 if (result)
590 err("usb_register failed. Error number %d\n", result);
591
592 return result;
593}
594
595static void __exit usb_keyspan_exit(void)
596{
597 /* deregister this driver with the USB subsystem */
598 usb_deregister(&keyspan_driver);
599}
600
601module_init(usb_keyspan_init);
602module_exit(usb_keyspan_exit);
603
604MODULE_DEVICE_TABLE(usb, keyspan_table);
605MODULE_AUTHOR(DRIVER_AUTHOR);
606MODULE_DESCRIPTION(DRIVER_DESC);
607MODULE_LICENSE(DRIVER_LICENSE);