blob: b3d3d027899718e8a73b26022e24949b9d2075bd [file] [log] [blame]
Ben Dooks2e4ea6e2009-07-30 23:23:21 +01001/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
2 *
Ben Dookse02f8662009-11-13 22:54:13 +00003 * Copyright (c) 2006-2008 Simtec Electronics
Ben Dooks2e4ea6e2009-07-30 23:23:21 +01004 * http://armlinux.simtec.co.uk/
5 * Ben Dooks <ben@simtec.co.uk>
6 *
7 * S3C24XX CPU Frequency scaling
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12*/
13
14#include <linux/init.h>
15#include <linux/module.h>
16#include <linux/interrupt.h>
17#include <linux/ioport.h>
18#include <linux/cpufreq.h>
19#include <linux/cpu.h>
20#include <linux/clk.h>
21#include <linux/err.h>
22#include <linux/io.h>
23#include <linux/sysdev.h>
Ben Dooks2e4ea6e2009-07-30 23:23:21 +010024#include <linux/sysfs.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090025#include <linux/slab.h>
Ben Dooks2e4ea6e2009-07-30 23:23:21 +010026
27#include <asm/mach/arch.h>
28#include <asm/mach/map.h>
29
30#include <plat/cpu.h>
31#include <plat/clock.h>
32#include <plat/cpu-freq-core.h>
33
34#include <mach/regs-clock.h>
35
36/* note, cpufreq support deals in kHz, no Hz */
37
38static struct cpufreq_driver s3c24xx_driver;
39static struct s3c_cpufreq_config cpu_cur;
40static struct s3c_iotimings s3c24xx_iotiming;
41static struct cpufreq_frequency_table *pll_reg;
42static unsigned int last_target = ~0;
43static unsigned int ftab_size;
44static struct cpufreq_frequency_table *ftab;
45
46static struct clk *_clk_mpll;
47static struct clk *_clk_xtal;
48static struct clk *clk_fclk;
49static struct clk *clk_hclk;
50static struct clk *clk_pclk;
51static struct clk *clk_arm;
52
Ben Dookse6d197a2009-07-30 23:23:42 +010053#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
54struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
55{
56 return &cpu_cur;
57}
58
59struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
60{
61 return &s3c24xx_iotiming;
62}
63#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
64
Ben Dooks2e4ea6e2009-07-30 23:23:21 +010065static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
66{
67 unsigned long fclk, pclk, hclk, armclk;
68
69 cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
70 cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
71 cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
72 cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
73
74 cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
75 cfg->pll.frequency = fclk;
76
77 cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
78
79 cfg->divs.h_divisor = fclk / hclk;
80 cfg->divs.p_divisor = fclk / pclk;
81}
82
83static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
84{
85 unsigned long pll = cfg->pll.frequency;
86
87 cfg->freq.fclk = pll;
88 cfg->freq.hclk = pll / cfg->divs.h_divisor;
89 cfg->freq.pclk = pll / cfg->divs.p_divisor;
90
91 /* convert hclk into 10ths of nanoseconds for io calcs */
92 cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
93}
94
95static inline int closer(unsigned int target, unsigned int n, unsigned int c)
96{
97 int diff_cur = abs(target - c);
98 int diff_new = abs(target - n);
99
100 return (diff_new < diff_cur);
101}
102
103static void s3c_cpufreq_show(const char *pfx,
104 struct s3c_cpufreq_config *cfg)
105{
106 s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
107 pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
108 cfg->freq.hclk, cfg->divs.h_divisor,
109 cfg->freq.pclk, cfg->divs.p_divisor);
110}
111
112/* functions to wrapper the driver info calls to do the cpu specific work */
113
114static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
115{
116 if (cfg->info->set_iotiming)
117 (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
118}
119
120static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
121{
122 if (cfg->info->calc_iotiming)
123 return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
124
125 return 0;
126}
127
128static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
129{
130 (cfg->info->set_refresh)(cfg);
131}
132
133static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
134{
135 (cfg->info->set_divs)(cfg);
136}
137
138static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
139{
140 return (cfg->info->calc_divs)(cfg);
141}
142
143static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
144{
145 (cfg->info->set_fvco)(cfg);
146}
147
148static inline void s3c_cpufreq_resume_clocks(void)
149{
150 cpu_cur.info->resume_clocks();
151}
152
153static inline void s3c_cpufreq_updateclk(struct clk *clk,
154 unsigned int freq)
155{
156 clk_set_rate(clk, freq);
157}
158
159static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
160 unsigned int target_freq,
161 struct cpufreq_frequency_table *pll)
162{
163 struct s3c_cpufreq_freqs freqs;
164 struct s3c_cpufreq_config cpu_new;
165 unsigned long flags;
166
167 cpu_new = cpu_cur; /* copy new from current */
168
169 s3c_cpufreq_show("cur", &cpu_cur);
170
171 /* TODO - check for DMA currently outstanding */
172
173 cpu_new.pll = pll ? *pll : cpu_cur.pll;
174
175 if (pll)
176 freqs.pll_changing = 1;
177
178 /* update our frequencies */
179
180 cpu_new.freq.armclk = target_freq;
181 cpu_new.freq.fclk = cpu_new.pll.frequency;
182
183 if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
184 printk(KERN_ERR "no divisors for %d\n", target_freq);
185 goto err_notpossible;
186 }
187
188 s3c_freq_dbg("%s: got divs\n", __func__);
189
190 s3c_cpufreq_calc(&cpu_new);
191
192 s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
193
194 if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
195 if (s3c_cpufreq_calcio(&cpu_new) < 0) {
196 printk(KERN_ERR "%s: no IO timings\n", __func__);
197 goto err_notpossible;
198 }
199 }
200
201 s3c_cpufreq_show("new", &cpu_new);
202
203 /* setup our cpufreq parameters */
204
205 freqs.old = cpu_cur.freq;
206 freqs.new = cpu_new.freq;
207
208 freqs.freqs.cpu = 0;
209 freqs.freqs.old = cpu_cur.freq.armclk / 1000;
210 freqs.freqs.new = cpu_new.freq.armclk / 1000;
211
212 /* update f/h/p clock settings before we issue the change
213 * notification, so that drivers do not need to do anything
214 * special if they want to recalculate on CPUFREQ_PRECHANGE. */
215
216 s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
217 s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
218 s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
219 s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
220
221 /* start the frequency change */
222
223 if (policy)
224 cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
225
226 /* If hclk is staying the same, then we do not need to
227 * re-write the IO or the refresh timings whilst we are changing
228 * speed. */
229
230 local_irq_save(flags);
231
232 /* is our memory clock slowing down? */
233 if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
234 s3c_cpufreq_setrefresh(&cpu_new);
235 s3c_cpufreq_setio(&cpu_new);
236 }
237
238 if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
239 /* not changing PLL, just set the divisors */
240
241 s3c_cpufreq_setdivs(&cpu_new);
242 } else {
243 if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
244 /* slow the cpu down, then set divisors */
245
246 s3c_cpufreq_setfvco(&cpu_new);
247 s3c_cpufreq_setdivs(&cpu_new);
248 } else {
249 /* set the divisors, then speed up */
250
251 s3c_cpufreq_setdivs(&cpu_new);
252 s3c_cpufreq_setfvco(&cpu_new);
253 }
254 }
255
256 /* did our memory clock speed up */
257 if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
258 s3c_cpufreq_setrefresh(&cpu_new);
259 s3c_cpufreq_setio(&cpu_new);
260 }
261
262 /* update our current settings */
263 cpu_cur = cpu_new;
264
265 local_irq_restore(flags);
266
267 /* notify everyone we've done this */
268 if (policy)
269 cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
270
271 s3c_freq_dbg("%s: finished\n", __func__);
272 return 0;
273
274 err_notpossible:
275 printk(KERN_ERR "no compatible settings for %d\n", target_freq);
276 return -EINVAL;
277}
278
279/* s3c_cpufreq_target
280 *
281 * called by the cpufreq core to adjust the frequency that the CPU
282 * is currently running at.
283 */
284
285static int s3c_cpufreq_target(struct cpufreq_policy *policy,
286 unsigned int target_freq,
287 unsigned int relation)
288{
289 struct cpufreq_frequency_table *pll;
290 unsigned int index;
291
292 /* avoid repeated calls which cause a needless amout of duplicated
293 * logging output (and CPU time as the calculation process is
294 * done) */
295 if (target_freq == last_target)
296 return 0;
297
298 last_target = target_freq;
299
300 s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
301 __func__, policy, target_freq, relation);
302
303 if (ftab) {
304 if (cpufreq_frequency_table_target(policy, ftab,
305 target_freq, relation,
306 &index)) {
307 s3c_freq_dbg("%s: table failed\n", __func__);
308 return -EINVAL;
309 }
310
311 s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
312 target_freq, index, ftab[index].frequency);
313 target_freq = ftab[index].frequency;
314 }
315
316 target_freq *= 1000; /* convert target to Hz */
317
318 /* find the settings for our new frequency */
319
320 if (!pll_reg || cpu_cur.lock_pll) {
321 /* either we've not got any PLL values, or we've locked
322 * to the current one. */
323 pll = NULL;
324 } else {
325 struct cpufreq_policy tmp_policy;
326 int ret;
327
328 /* we keep the cpu pll table in Hz, to ensure we get an
329 * accurate value for the PLL output. */
330
331 tmp_policy.min = policy->min * 1000;
332 tmp_policy.max = policy->max * 1000;
333 tmp_policy.cpu = policy->cpu;
334
335 /* cpufreq_frequency_table_target uses a pointer to 'index'
336 * which is the number of the table entry, not the value of
337 * the table entry's index field. */
338
339 ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
340 target_freq, relation,
341 &index);
342
343 if (ret < 0) {
344 printk(KERN_ERR "%s: no PLL available\n", __func__);
345 goto err_notpossible;
346 }
347
348 pll = pll_reg + index;
349
350 s3c_freq_dbg("%s: target %u => %u\n",
351 __func__, target_freq, pll->frequency);
352
353 target_freq = pll->frequency;
354 }
355
356 return s3c_cpufreq_settarget(policy, target_freq, pll);
357
358 err_notpossible:
359 printk(KERN_ERR "no compatible settings for %d\n", target_freq);
360 return -EINVAL;
361}
362
363static unsigned int s3c_cpufreq_get(unsigned int cpu)
364{
365 return clk_get_rate(clk_arm) / 1000;
366}
367
368struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
369{
370 struct clk *clk;
371
372 clk = clk_get(dev, name);
373 if (IS_ERR(clk))
374 printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
375
376 return clk;
377}
378
379static int s3c_cpufreq_init(struct cpufreq_policy *policy)
380{
381 printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
382
383 if (policy->cpu != 0)
384 return -EINVAL;
385
386 policy->cur = s3c_cpufreq_get(0);
387 policy->min = policy->cpuinfo.min_freq = 0;
388 policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
389 policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
390
391 /* feed the latency information from the cpu driver */
392 policy->cpuinfo.transition_latency = cpu_cur.info->latency;
393
394 if (ftab)
395 cpufreq_frequency_table_cpuinfo(policy, ftab);
396
397 return 0;
398}
399
400static __init int s3c_cpufreq_initclks(void)
401{
402 _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
403 _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
404 clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
405 clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
406 clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
407 clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
408
409 if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
410 IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
411 printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
412 return -ENOENT;
413 }
414
415 printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
416 clk_get_rate(clk_fclk) / 1000,
417 clk_get_rate(clk_hclk) / 1000,
418 clk_get_rate(clk_pclk) / 1000,
419 clk_get_rate(clk_arm) / 1000);
420
421 return 0;
422}
423
424static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
425{
426 if (policy->cpu != 0)
427 return -EINVAL;
428
429 return 0;
430}
431
432#ifdef CONFIG_PM
433static struct cpufreq_frequency_table suspend_pll;
434static unsigned int suspend_freq;
435
Rafael J. Wysocki7ca64e22011-03-10 21:13:05 +0100436static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
Ben Dooks2e4ea6e2009-07-30 23:23:21 +0100437{
438 suspend_pll.frequency = clk_get_rate(_clk_mpll);
439 suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
440 suspend_freq = s3c_cpufreq_get(0) * 1000;
441
442 return 0;
443}
444
445static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
446{
447 int ret;
448
449 s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
450
451 last_target = ~0; /* invalidate last_target setting */
452
453 /* first, find out what speed we resumed at. */
454 s3c_cpufreq_resume_clocks();
455
456 /* whilst we will be called later on, we try and re-set the
457 * cpu frequencies as soon as possible so that we do not end
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300458 * up resuming devices and then immediately having to re-set
Ben Dooks2e4ea6e2009-07-30 23:23:21 +0100459 * a number of settings once these devices have restarted.
460 *
461 * as a note, it is expected devices are not used until they
462 * have been un-suspended and at that time they should have
463 * used the updated clock settings.
464 */
465
466 ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
467 if (ret) {
468 printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
469 return ret;
470 }
471
472 return 0;
473}
474#else
475#define s3c_cpufreq_resume NULL
476#define s3c_cpufreq_suspend NULL
477#endif
478
479static struct cpufreq_driver s3c24xx_driver = {
480 .flags = CPUFREQ_STICKY,
481 .verify = s3c_cpufreq_verify,
482 .target = s3c_cpufreq_target,
483 .get = s3c_cpufreq_get,
484 .init = s3c_cpufreq_init,
485 .suspend = s3c_cpufreq_suspend,
486 .resume = s3c_cpufreq_resume,
487 .name = "s3c24xx",
488};
489
490
491int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
492{
493 if (!info || !info->name) {
494 printk(KERN_ERR "%s: failed to pass valid information\n",
495 __func__);
496 return -EINVAL;
497 }
498
499 printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
500 info->name);
501
502 /* check our driver info has valid data */
503
504 BUG_ON(info->set_refresh == NULL);
505 BUG_ON(info->set_divs == NULL);
506 BUG_ON(info->calc_divs == NULL);
507
508 /* info->set_fvco is optional, depending on whether there
509 * is a need to set the clock code. */
510
511 cpu_cur.info = info;
512
513 /* Note, driver registering should probably update locktime */
514
515 return 0;
516}
517
518int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
519{
520 struct s3c_cpufreq_board *ours;
521
522 if (!board) {
523 printk(KERN_INFO "%s: no board data\n", __func__);
524 return -EINVAL;
525 }
526
527 /* Copy the board information so that each board can make this
528 * initdata. */
529
530 ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
531 if (ours == NULL) {
532 printk(KERN_ERR "%s: no memory\n", __func__);
533 return -ENOMEM;
534 }
535
536 *ours = *board;
537 cpu_cur.board = ours;
538
539 return 0;
540}
541
542int __init s3c_cpufreq_auto_io(void)
543{
544 int ret;
545
546 if (!cpu_cur.info->get_iotiming) {
547 printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
548 return -ENOENT;
549 }
550
551 printk(KERN_INFO "%s: working out IO settings\n", __func__);
552
553 ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
554 if (ret)
555 printk(KERN_ERR "%s: failed to get timings\n", __func__);
556
557 return ret;
558}
559
560/* if one or is zero, then return the other, otherwise return the min */
561#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
562
563/**
564 * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
565 * @dst: The destination structure
566 * @a: One argument.
567 * @b: The other argument.
568 *
569 * Create a minimum of each frequency entry in the 'struct s3c_freq',
570 * unless the entry is zero when it is ignored and the non-zero argument
571 * used.
572 */
573static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
574 struct s3c_freq *a, struct s3c_freq *b)
575{
576 dst->fclk = do_min(a->fclk, b->fclk);
577 dst->hclk = do_min(a->hclk, b->hclk);
578 dst->pclk = do_min(a->pclk, b->pclk);
579 dst->armclk = do_min(a->armclk, b->armclk);
580}
581
582static inline u32 calc_locktime(u32 freq, u32 time_us)
583{
584 u32 result;
585
586 result = freq * time_us;
587 result = DIV_ROUND_UP(result, 1000 * 1000);
588
589 return result;
590}
591
592static void s3c_cpufreq_update_loctkime(void)
593{
594 unsigned int bits = cpu_cur.info->locktime_bits;
595 u32 rate = (u32)clk_get_rate(_clk_xtal);
596 u32 val;
597
598 if (bits == 0) {
599 WARN_ON(1);
600 return;
601 }
602
603 val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
604 val |= calc_locktime(rate, cpu_cur.info->locktime_m);
605
606 printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
607 __raw_writel(val, S3C2410_LOCKTIME);
608}
609
610static int s3c_cpufreq_build_freq(void)
611{
612 int size, ret;
613
614 if (!cpu_cur.info->calc_freqtable)
615 return -EINVAL;
616
617 kfree(ftab);
618 ftab = NULL;
619
620 size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
621 size++;
622
623 ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
624 if (!ftab) {
625 printk(KERN_ERR "%s: no memory for tables\n", __func__);
626 return -ENOMEM;
627 }
628
629 ftab_size = size;
630
631 ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
632 s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
633
634 return 0;
635}
636
637static int __init s3c_cpufreq_initcall(void)
638{
639 int ret = 0;
640
641 if (cpu_cur.info && cpu_cur.board) {
642 ret = s3c_cpufreq_initclks();
643 if (ret)
644 goto out;
645
646 /* get current settings */
647 s3c_cpufreq_getcur(&cpu_cur);
648 s3c_cpufreq_show("cur", &cpu_cur);
649
650 if (cpu_cur.board->auto_io) {
651 ret = s3c_cpufreq_auto_io();
652 if (ret) {
653 printk(KERN_ERR "%s: failed to get io timing\n",
654 __func__);
655 goto out;
656 }
657 }
658
659 if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
660 printk(KERN_ERR "%s: no IO support registered\n",
661 __func__);
662 ret = -EINVAL;
663 goto out;
664 }
665
666 if (!cpu_cur.info->need_pll)
667 cpu_cur.lock_pll = 1;
668
669 s3c_cpufreq_update_loctkime();
670
671 s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
672 &cpu_cur.info->max);
673
674 if (cpu_cur.info->calc_freqtable)
675 s3c_cpufreq_build_freq();
676
677 ret = cpufreq_register_driver(&s3c24xx_driver);
678 }
679
680 out:
681 return ret;
682}
683
684late_initcall(s3c_cpufreq_initcall);
685
686/**
687 * s3c_plltab_register - register CPU PLL table.
688 * @plls: The list of PLL entries.
689 * @plls_no: The size of the PLL entries @plls.
690 *
691 * Register the given set of PLLs with the system.
692 */
693int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
694 unsigned int plls_no)
695{
696 struct cpufreq_frequency_table *vals;
697 unsigned int size;
698
699 size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
700
701 vals = kmalloc(size, GFP_KERNEL);
702 if (vals) {
703 memcpy(vals, plls, size);
704 pll_reg = vals;
705
706 /* write a terminating entry, we don't store it in the
707 * table that is stored in the kernel */
708 vals += plls_no;
709 vals->frequency = CPUFREQ_TABLE_END;
710
711 printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
712 } else
713 printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
714
715 return vals ? 0 : -ENOMEM;
716}