blob: 1f996621bc9c9cf67a85f71ef665e0eda7615466 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*****************************************************************************/
2
3/*
4 * istallion.h -- stallion intelligent multiport serial driver.
5 *
6 * Copyright (C) 1996-1998 Stallion Technologies
7 * Copyright (C) 1994-1996 Greg Ungerer.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
Linus Torvalds1da177e2005-04-16 15:20:36 -070024/*****************************************************************************/
25#ifndef _ISTALLION_H
26#define _ISTALLION_H
27/*****************************************************************************/
28
29/*
30 * Define important driver constants here.
31 */
32#define STL_MAXBRDS 4
33#define STL_MAXPANELS 4
34#define STL_MAXPORTS 64
35#define STL_MAXCHANS (STL_MAXPORTS + 1)
36#define STL_MAXDEVS (STL_MAXBRDS * STL_MAXPORTS)
37
38
39/*
40 * Define a set of structures to hold all the board/panel/port info
41 * for our ports. These will be dynamically allocated as required at
42 * driver initialization time.
43 */
44
45/*
46 * Port and board structures to hold status info about each object.
47 * The board structure contains pointers to structures for each port
48 * connected to it. Panels are not distinguished here, since
49 * communication with the slave board will always be on a per port
50 * basis.
51 */
52typedef struct {
53 unsigned long magic;
54 int portnr;
55 int panelnr;
56 int brdnr;
57 unsigned long state;
58 int devnr;
59 int flags;
60 int baud_base;
61 int custom_divisor;
62 int close_delay;
63 int closing_wait;
64 int refcount;
65 int openwaitcnt;
66 int rc;
67 int argsize;
68 void *argp;
69 unsigned int rxmarkmsk;
70 struct tty_struct *tty;
71 wait_queue_head_t open_wait;
72 wait_queue_head_t close_wait;
73 wait_queue_head_t raw_wait;
74 struct work_struct tqhangup;
75 asysigs_t asig;
76 unsigned long addr;
77 unsigned long rxoffset;
78 unsigned long txoffset;
79 unsigned long sigs;
80 unsigned long pflag;
81 unsigned int rxsize;
82 unsigned int txsize;
83 unsigned char reqbit;
84 unsigned char portidx;
85 unsigned char portbit;
86} stliport_t;
87
88/*
89 * Use a structure of function pointers to do board level operations.
90 * These include, enable/disable, paging shared memory, interrupting, etc.
91 */
92typedef struct stlibrd {
93 unsigned long magic;
94 int brdnr;
95 int brdtype;
96 int state;
97 int nrpanels;
98 int nrports;
99 int nrdevs;
100 unsigned int iobase;
101 int iosize;
102 unsigned long memaddr;
103 void *membase;
104 int memsize;
105 int pagesize;
106 int hostoffset;
107 int slaveoffset;
108 int bitsize;
109 int enabval;
110 int panels[STL_MAXPANELS];
111 int panelids[STL_MAXPANELS];
112 void (*init)(struct stlibrd *brdp);
113 void (*enable)(struct stlibrd *brdp);
114 void (*reenable)(struct stlibrd *brdp);
115 void (*disable)(struct stlibrd *brdp);
116 char *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
117 void (*intr)(struct stlibrd *brdp);
118 void (*reset)(struct stlibrd *brdp);
119 stliport_t *ports[STL_MAXPORTS];
120} stlibrd_t;
121
122
123/*
124 * Define MAGIC numbers used for above structures.
125 */
126#define STLI_PORTMAGIC 0xe671c7a1
127#define STLI_BOARDMAGIC 0x4bc6c825
128
129/*****************************************************************************/
130#endif