blob: f07c340990da570303a25a0e44cbf7ca4b21efa8 [file] [log] [blame]
Samuel Ortizc6ae5222006-05-25 16:19:22 -07001/*****************************************************************************
2*
3* Filename: mcs7780.c
4* Version: 0.4-alpha
5* Description: Irda MosChip USB Dongle Driver
6* Authors: Lukasz Stelmach <stlman@poczta.fm>
7* Brian Pugh <bpugh@cs.pdx.edu>
8* Judy Fischbach <jfisch@cs.pdx.edu>
9*
10* Based on stir4200 driver, but some things done differently.
11* Based on earlier driver by Paul Stewart <stewart@parc.com>
12*
13* Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at>
14* Copyright (C) 2001, Dag Brattli <dag@brattli.net>
15* Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
16* Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org>
17* Copyright (C) 2005, Lukasz Stelmach <stlman@poczta.fm>
18* Copyright (C) 2005, Brian Pugh <bpugh@cs.pdx.edu>
19* Copyright (C) 2005, Judy Fischbach <jfisch@cs.pdx.edu>
20*
21* This program is free software; you can redistribute it and/or modify
22* it under the terms of the GNU General Public License as published by
23* the Free Software Foundation; either version 2 of the License, or
24* (at your option) any later version.
25*
26* This program is distributed in the hope that it will be useful,
27* but WITHOUT ANY WARRANTY; without even the implied warranty of
28* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
29* GNU General Public License for more details.
30*
31* You should have received a copy of the GNU General Public License
32* along with this program; if not, write to the Free Software
33* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
34*
35*****************************************************************************/
36
37/*
38 * MCS7780 is a simple USB to IrDA bridge by MosChip. It is neither
39 * compatibile with irda-usb nor with stir4200. Although it is quite
40 * similar to the later as far as general idea of operation is concerned.
41 * That is it requires the software to do all the framing job at SIR speeds.
42 * The hardware does take care of the framing at MIR and FIR speeds.
43 * It supports all speeds from 2400 through 4Mbps
44 */
45
46#include <linux/module.h>
47#include <linux/moduleparam.h>
Samuel Ortizc6ae5222006-05-25 16:19:22 -070048#include <linux/kernel.h>
49#include <linux/types.h>
50#include <linux/errno.h>
51#include <linux/init.h>
52#include <linux/slab.h>
Samuel Ortizc6ae5222006-05-25 16:19:22 -070053#include <linux/usb.h>
54#include <linux/device.h>
55#include <linux/crc32.h>
56
57#include <asm/unaligned.h>
58#include <asm/byteorder.h>
59#include <asm/uaccess.h>
60
61#include <net/irda/irda.h>
62#include <net/irda/wrapper.h>
63#include <net/irda/crc.h>
64
65#include "mcs7780.h"
66
67#define MCS_VENDOR_ID 0x9710
68#define MCS_PRODUCT_ID 0x7780
69
70static struct usb_device_id mcs_table[] = {
71 /* MosChip Corp., MCS7780 FIR-USB Adapter */
72 {USB_DEVICE(MCS_VENDOR_ID, MCS_PRODUCT_ID)},
73 {},
74};
75
76MODULE_AUTHOR("Brian Pugh <bpugh@cs.pdx.edu>");
77MODULE_DESCRIPTION("IrDA-USB Dongle Driver for MosChip MCS7780");
78MODULE_VERSION("0.3alpha");
79MODULE_LICENSE("GPL");
80
81MODULE_DEVICE_TABLE(usb, mcs_table);
82
83static int qos_mtt_bits = 0x07 /* > 1ms */ ;
84module_param(qos_mtt_bits, int, 0);
85MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
86
87static int receive_mode = 0x1;
88module_param(receive_mode, int, 0);
89MODULE_PARM_DESC(receive_mode,
90 "Receive mode of the device (1:fast, 0:slow, default:1)");
91
92static int sir_tweak = 1;
93module_param(sir_tweak, int, 0444);
94MODULE_PARM_DESC(sir_tweak,
95 "Default pulse width (1:1.6us, 0:3/16 bit, default:1).");
96
97static int transceiver_type = MCS_TSC_VISHAY;
98module_param(transceiver_type, int, 0444);
99MODULE_PARM_DESC(transceiver_type, "IR transceiver type, see mcs7780.h.");
100
Adrian Bunk7263ade2006-06-29 12:39:07 -0700101static struct usb_driver mcs_driver = {
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700102 .name = "mcs7780",
103 .probe = mcs_probe,
104 .disconnect = mcs_disconnect,
105 .id_table = mcs_table,
106};
107
108/* speed flag selection by direct addressing.
109addr = (speed >> 8) & 0x0f
110
1110x1 57600 0x2 115200 0x4 1152000 0x5 9600
1120x6 38400 0x9 2400 0xa 576000 0xb 19200
113
1144Mbps (or 2400) must be checked separately. Since it also has
115to be programmed in a different manner that is not a big problem.
116*/
117static __u16 mcs_speed_set[16] = { 0,
118 MCS_SPEED_57600,
119 MCS_SPEED_115200,
120 0,
121 MCS_SPEED_1152000,
122 MCS_SPEED_9600,
123 MCS_SPEED_38400,
124 0, 0,
125 MCS_SPEED_2400,
126 MCS_SPEED_576000,
127 MCS_SPEED_19200,
128 0, 0, 0,
129};
130
131/* Set given 16 bit register with a 16 bit value. Send control message
132 * to set dongle register. */
133static int mcs_set_reg(struct mcs_cb *mcs, __u16 reg, __u16 val)
134{
135 struct usb_device *dev = mcs->usbdev;
136 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
137 MCS_WR_RTYPE, val, reg, NULL, 0,
138 msecs_to_jiffies(MCS_CTRL_TIMEOUT));
139}
140
141/* Get 16 bit register value. Send contol message to read dongle register. */
142static int mcs_get_reg(struct mcs_cb *mcs, __u16 reg, __u16 * val)
143{
144 struct usb_device *dev = mcs->usbdev;
145 int ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
146 MCS_RD_RTYPE, 0, reg, val, 2,
147 msecs_to_jiffies(MCS_CTRL_TIMEOUT));
148
149 return ret;
150}
151
152/* Setup a communication between mcs7780 and TFDU chips. It is described
153 * in more detail in the data sheet. The setup sequence puts the the
154 * vishay tranceiver into high speed mode. It will also receive SIR speed
155 * packets but at reduced sensitivity.
156 */
157
158/* 0: OK 1:ERROR */
159static inline int mcs_setup_transceiver_vishay(struct mcs_cb *mcs)
160{
161 int ret = 0;
162 __u16 rval;
163
164 /* mcs_get_reg should read exactly two bytes from the dongle */
165 ret = mcs_get_reg(mcs, MCS_XCVR_REG, &rval);
166 if (unlikely(ret != 2)) {
167 ret = -EIO;
168 goto error;
169 }
170
171 /* The MCS_XCVR_CONF bit puts the transceiver into configuration
172 * mode. The MCS_MODE0 bit must start out high (1) and then
173 * transition to low and the MCS_STFIR and MCS_MODE1 bits must
174 * be low.
175 */
176 rval |= (MCS_MODE0 | MCS_XCVR_CONF);
177 rval &= ~MCS_STFIR;
178 rval &= ~MCS_MODE1;
179 ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval);
180 if (unlikely(ret))
181 goto error;
182
183 rval &= ~MCS_MODE0;
184 ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval);
185 if (unlikely(ret))
186 goto error;
187
188 rval &= ~MCS_XCVR_CONF;
189 ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval);
190 if (unlikely(ret))
191 goto error;
192
193 ret = 0;
194 error:
195 return ret;
196}
197
198/* Setup a communication between mcs7780 and agilent chip. */
199static inline int mcs_setup_transceiver_agilent(struct mcs_cb *mcs)
200{
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700201 IRDA_WARNING("This transceiver type is not supported yet.\n");
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700202 return 1;
203}
204
205/* Setup a communication between mcs7780 and sharp chip. */
206static inline int mcs_setup_transceiver_sharp(struct mcs_cb *mcs)
207{
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700208 IRDA_WARNING("This transceiver type is not supported yet.\n");
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700209 return 1;
210}
211
212/* Common setup for all transceivers */
213static inline int mcs_setup_transceiver(struct mcs_cb *mcs)
214{
215 int ret = 0;
216 __u16 rval;
217 char *msg;
218
219 msg = "Basic transceiver setup error.";
220
221 /* read value of MODE Register, set the DRIVER and RESET bits
222 * and write value back out to MODE Register
223 */
224 ret = mcs_get_reg(mcs, MCS_MODE_REG, &rval);
225 if(unlikely(ret != 2))
226 goto error;
227 rval |= MCS_DRIVER; /* put the mcs7780 into configuration mode. */
228 ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
229 if(unlikely(ret))
230 goto error;
231
232 rval = 0; /* set min pulse width to 0 initially. */
233 ret = mcs_set_reg(mcs, MCS_MINRXPW_REG, rval);
234 if(unlikely(ret))
235 goto error;
236
237 ret = mcs_get_reg(mcs, MCS_MODE_REG, &rval);
238 if(unlikely(ret != 2))
239 goto error;
240
241 rval &= ~MCS_FIR; /* turn off fir mode. */
242 if(mcs->sir_tweak)
243 rval |= MCS_SIR16US; /* 1.6us pulse width */
244 else
245 rval &= ~MCS_SIR16US; /* 3/16 bit time pulse width */
246
247 /* make sure ask mode and back to back packets are off. */
248 rval &= ~(MCS_BBTG | MCS_ASK);
249
250 rval &= ~MCS_SPEED_MASK;
251 rval |= MCS_SPEED_9600; /* make sure initial speed is 9600. */
252 mcs->speed = 9600;
253 mcs->new_speed = 0; /* new_speed is set to 0 */
254 rval &= ~MCS_PLLPWDN; /* disable power down. */
255
256 /* make sure device determines direction and that the auto send sip
257 * pulse are on.
258 */
259 rval |= MCS_DTD | MCS_SIPEN;
260
261 ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
262 if(unlikely(ret))
263 goto error;
264
265 msg = "transceiver model specific setup error.";
266 switch (mcs->transceiver_type) {
267 case MCS_TSC_VISHAY:
268 ret = mcs_setup_transceiver_vishay(mcs);
269 break;
270
271 case MCS_TSC_SHARP:
272 ret = mcs_setup_transceiver_sharp(mcs);
273 break;
274
275 case MCS_TSC_AGILENT:
276 ret = mcs_setup_transceiver_agilent(mcs);
277 break;
278
279 default:
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700280 IRDA_WARNING("Unknown transceiver type: %d\n",
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700281 mcs->transceiver_type);
282 ret = 1;
283 }
284 if (unlikely(ret))
285 goto error;
286
287 /* If transceiver is not SHARP, then if receive mode set
288 * on the RXFAST bit in the XCVR Register otherwise unset it
289 */
290 if (mcs->transceiver_type != MCS_TSC_SHARP) {
291
292 ret = mcs_get_reg(mcs, MCS_XCVR_REG, &rval);
293 if (unlikely(ret != 2))
294 goto error;
295 if (mcs->receive_mode)
296 rval |= MCS_RXFAST;
297 else
298 rval &= ~MCS_RXFAST;
299 ret = mcs_set_reg(mcs, MCS_XCVR_REG, rval);
300 if (unlikely(ret))
301 goto error;
302 }
303
304 msg = "transceiver reset.";
305
306 ret = mcs_get_reg(mcs, MCS_MODE_REG, &rval);
307 if (unlikely(ret != 2))
308 goto error;
309
310 /* reset the mcs7780 so all changes take effect. */
311 rval &= ~MCS_RESET;
312 ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
313 if (unlikely(ret))
314 goto error;
315 else
316 return ret;
317
318error:
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700319 IRDA_ERROR("%s\n", msg);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700320 return ret;
321}
322
323/* Wraps the data in format for SIR */
324static inline int mcs_wrap_sir_skb(struct sk_buff *skb, __u8 * buf)
325{
326 int wraplen;
327
328 /* 2: full frame length, including "the length" */
329 wraplen = async_wrap_skb(skb, buf + 2, 4094);
330
331 wraplen += 2;
332 buf[0] = wraplen & 0xff;
333 buf[1] = (wraplen >> 8) & 0xff;
334
335 return wraplen;
336}
337
338/* Wraps the data in format for FIR */
339static unsigned mcs_wrap_fir_skb(const struct sk_buff *skb, __u8 *buf)
340{
341 unsigned int len = 0;
342 __u32 fcs = ~(crc32_le(~0, skb->data, skb->len));
343
344 /* add 2 bytes for length value and 4 bytes for fcs. */
345 len = skb->len + 6;
346
347 /* The mcs7780 requires that the first two bytes are the packet
348 * length in little endian order. Note: the length value includes
349 * the two bytes for the length value itself.
350 */
351 buf[0] = len & 0xff;
352 buf[1] = (len >> 8) & 0xff;
353 /* copy the data into the tx buffer. */
Arnaldo Carvalho de Melod626f622007-03-27 18:55:52 -0300354 skb_copy_from_linear_data(skb, buf + 2, skb->len);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700355 /* put the fcs in the last four bytes in little endian order. */
356 buf[len - 4] = fcs & 0xff;
357 buf[len - 3] = (fcs >> 8) & 0xff;
358 buf[len - 2] = (fcs >> 16) & 0xff;
359 buf[len - 1] = (fcs >> 24) & 0xff;
360
361 return len;
362}
363
364/* Wraps the data in format for MIR */
365static unsigned mcs_wrap_mir_skb(const struct sk_buff *skb, __u8 *buf)
366{
367 __u16 fcs = 0;
368 int len = skb->len + 4;
369
370 fcs = ~(irda_calc_crc16(~fcs, skb->data, skb->len));
371 /* put the total packet length in first. Note: packet length
372 * value includes the two bytes that hold the packet length
373 * itself.
374 */
375 buf[0] = len & 0xff;
376 buf[1] = (len >> 8) & 0xff;
377 /* copy the data */
Arnaldo Carvalho de Melod626f622007-03-27 18:55:52 -0300378 skb_copy_from_linear_data(skb, buf + 2, skb->len);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700379 /* put the fcs in last two bytes in little endian order. */
380 buf[len - 2] = fcs & 0xff;
381 buf[len - 1] = (fcs >> 8) & 0xff;
382
383 return len;
384}
385
386/* Unwrap received packets at MIR speed. A 16 bit crc_ccitt checksum is
387 * used for the fcs. When performed over the entire packet the result
388 * should be GOOD_FCS = 0xf0b8. Hands the unwrapped data off to the IrDA
389 * layer via a sk_buff.
390 */
391static void mcs_unwrap_mir(struct mcs_cb *mcs, __u8 *buf, int len)
392{
393 __u16 fcs;
394 int new_len;
395 struct sk_buff *skb;
396
397 /* Assume that the frames are going to fill a single packet
398 * rather than span multiple packets.
399 */
400
401 new_len = len - 2;
402 if(unlikely(new_len <= 0)) {
403 IRDA_ERROR("%s short frame length %d\n",
404 mcs->netdev->name, new_len);
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800405 ++mcs->netdev->stats.rx_errors;
406 ++mcs->netdev->stats.rx_length_errors;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700407 return;
408 }
409 fcs = 0;
410 fcs = irda_calc_crc16(~fcs, buf, len);
411
412 if(fcs != GOOD_FCS) {
413 IRDA_ERROR("crc error calc 0x%x len %d\n",
414 fcs, new_len);
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800415 mcs->netdev->stats.rx_errors++;
416 mcs->netdev->stats.rx_crc_errors++;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700417 return;
418 }
419
420 skb = dev_alloc_skb(new_len + 1);
421 if(unlikely(!skb)) {
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800422 ++mcs->netdev->stats.rx_dropped;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700423 return;
424 }
425
426 skb_reserve(skb, 1);
Arnaldo Carvalho de Melo27d7ff42007-03-31 11:55:19 -0300427 skb_copy_to_linear_data(skb, buf, new_len);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700428 skb_put(skb, new_len);
Arnaldo Carvalho de Melo459a98e2007-03-19 15:30:44 -0700429 skb_reset_mac_header(skb);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700430 skb->protocol = htons(ETH_P_IRDA);
431 skb->dev = mcs->netdev;
432
433 netif_rx(skb);
434
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800435 mcs->netdev->stats.rx_packets++;
436 mcs->netdev->stats.rx_bytes += new_len;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700437}
438
439/* Unwrap received packets at FIR speed. A 32 bit crc_ccitt checksum is
440 * used for the fcs. Hands the unwrapped data off to the IrDA
441 * layer via a sk_buff.
442 */
443static void mcs_unwrap_fir(struct mcs_cb *mcs, __u8 *buf, int len)
444{
445 __u32 fcs;
446 int new_len;
447 struct sk_buff *skb;
448
449 /* Assume that the frames are going to fill a single packet
450 * rather than span multiple packets. This is most likely a false
451 * assumption.
452 */
453
454 new_len = len - 4;
455 if(unlikely(new_len <= 0)) {
456 IRDA_ERROR("%s short frame length %d\n",
457 mcs->netdev->name, new_len);
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800458 ++mcs->netdev->stats.rx_errors;
459 ++mcs->netdev->stats.rx_length_errors;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700460 return;
461 }
462
463 fcs = ~(crc32_le(~0, buf, new_len));
Harvey Harrison6caf52a42008-04-29 01:03:36 -0700464 if(fcs != get_unaligned_le32(buf + new_len)) {
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700465 IRDA_ERROR("crc error calc 0x%x len %d\n", fcs, new_len);
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800466 mcs->netdev->stats.rx_errors++;
467 mcs->netdev->stats.rx_crc_errors++;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700468 return;
469 }
470
471 skb = dev_alloc_skb(new_len + 1);
472 if(unlikely(!skb)) {
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800473 ++mcs->netdev->stats.rx_dropped;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700474 return;
475 }
476
477 skb_reserve(skb, 1);
Arnaldo Carvalho de Melo27d7ff42007-03-31 11:55:19 -0300478 skb_copy_to_linear_data(skb, buf, new_len);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700479 skb_put(skb, new_len);
Arnaldo Carvalho de Melo459a98e2007-03-19 15:30:44 -0700480 skb_reset_mac_header(skb);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700481 skb->protocol = htons(ETH_P_IRDA);
482 skb->dev = mcs->netdev;
483
484 netif_rx(skb);
485
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800486 mcs->netdev->stats.rx_packets++;
487 mcs->netdev->stats.rx_bytes += new_len;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700488}
489
490
491/* Allocates urbs for both receive and transmit.
492 * If alloc fails return error code 0 (fail) otherwise
493 * return error code 1 (success).
494 */
495static inline int mcs_setup_urbs(struct mcs_cb *mcs)
496{
497 mcs->rx_urb = NULL;
498
499 mcs->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
500 if (!mcs->tx_urb)
501 return 0;
502
503 mcs->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
504 if (!mcs->rx_urb)
505 return 0;
506
507 return 1;
508}
509
510/* Sets up state to be initially outside frame, gets receive urb,
511 * sets status to successful and then submits the urb to start
512 * receiving the data.
513 */
514static inline int mcs_receive_start(struct mcs_cb *mcs)
515{
516 mcs->rx_buff.in_frame = FALSE;
517 mcs->rx_buff.state = OUTSIDE_FRAME;
518
519 usb_fill_bulk_urb(mcs->rx_urb, mcs->usbdev,
520 usb_rcvbulkpipe(mcs->usbdev, mcs->ep_in),
521 mcs->in_buf, 4096, mcs_receive_irq, mcs);
522
523 mcs->rx_urb->status = 0;
524 return usb_submit_urb(mcs->rx_urb, GFP_KERNEL);
525}
526
527/* Finds the in and out endpoints for the mcs control block */
528static inline int mcs_find_endpoints(struct mcs_cb *mcs,
529 struct usb_host_endpoint *ep, int epnum)
530{
531 int i;
532 int ret = 0;
533
534 /* If no place to store the endpoints just return */
535 if (!ep)
536 return ret;
537
538 /* cycle through all endpoints, find the first two that are DIR_IN */
539 for (i = 0; i < epnum; i++) {
540 if (ep[i].desc.bEndpointAddress & USB_DIR_IN)
541 mcs->ep_in = ep[i].desc.bEndpointAddress;
542 else
543 mcs->ep_out = ep[i].desc.bEndpointAddress;
544
545 /* MosChip says that the chip has only two bulk
546 * endpoints. Find one for each direction and move on.
547 */
548 if ((mcs->ep_in != 0) && (mcs->ep_out != 0)) {
549 ret = 1;
550 break;
551 }
552 }
553
554 return ret;
555}
556
David Howellsc4028952006-11-22 14:57:56 +0000557static void mcs_speed_work(struct work_struct *work)
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700558{
David Howellsc4028952006-11-22 14:57:56 +0000559 struct mcs_cb *mcs = container_of(work, struct mcs_cb, work);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700560 struct net_device *netdev = mcs->netdev;
561
562 mcs_speed_change(mcs);
563 netif_wake_queue(netdev);
564}
565
566/* Function to change the speed of the mcs7780. Fully supports SIR,
567 * MIR, and FIR speeds.
568 */
569static int mcs_speed_change(struct mcs_cb *mcs)
570{
571 int ret = 0;
572 int rst = 0;
573 int cnt = 0;
574 __u16 nspeed;
575 __u16 rval;
576
577 nspeed = mcs_speed_set[(mcs->new_speed >> 8) & 0x0f];
578
579 do {
580 mcs_get_reg(mcs, MCS_RESV_REG, &rval);
581 } while(cnt++ < 100 && (rval & MCS_IRINTX));
582
Roel Kluinfb088672009-02-12 16:42:31 -0800583 if (cnt > 100) {
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700584 IRDA_ERROR("unable to change speed\n");
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700585 ret = -EIO;
586 goto error;
587 }
588
589 mcs_get_reg(mcs, MCS_MODE_REG, &rval);
590
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300591 /* MINRXPW values recommended by MosChip */
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700592 if (mcs->new_speed <= 115200) {
593 rval &= ~MCS_FIR;
594
595 if ((rst = (mcs->speed > 115200)))
596 mcs_set_reg(mcs, MCS_MINRXPW_REG, 0);
597
598 } else if (mcs->new_speed <= 1152000) {
599 rval &= ~MCS_FIR;
600
601 if ((rst = !(mcs->speed == 576000 || mcs->speed == 1152000)))
602 mcs_set_reg(mcs, MCS_MINRXPW_REG, 5);
603
604 } else {
605 rval |= MCS_FIR;
606
607 if ((rst = (mcs->speed != 4000000)))
608 mcs_set_reg(mcs, MCS_MINRXPW_REG, 5);
609
610 }
611
612 rval &= ~MCS_SPEED_MASK;
613 rval |= nspeed;
614
615 ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
616 if (unlikely(ret))
617 goto error;
618
619 if (rst)
620 switch (mcs->transceiver_type) {
621 case MCS_TSC_VISHAY:
622 ret = mcs_setup_transceiver_vishay(mcs);
623 break;
624
625 case MCS_TSC_SHARP:
626 ret = mcs_setup_transceiver_sharp(mcs);
627 break;
628
629 case MCS_TSC_AGILENT:
630 ret = mcs_setup_transceiver_agilent(mcs);
631 break;
632
633 default:
634 ret = 1;
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700635 IRDA_WARNING("Unknown transceiver type: %d\n",
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700636 mcs->transceiver_type);
637 }
638 if (unlikely(ret))
639 goto error;
640
641 mcs_get_reg(mcs, MCS_MODE_REG, &rval);
642 rval &= ~MCS_RESET;
643 ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
644
645 mcs->speed = mcs->new_speed;
646 error:
647 mcs->new_speed = 0;
648 return ret;
649}
650
651/* Ioctl calls not supported at this time. Can be an area of future work. */
652static int mcs_net_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
653{
654 /* struct if_irda_req *irq = (struct if_irda_req *)rq; */
655 /* struct mcs_cb *mcs = netdev_priv(netdev); */
656 int ret = 0;
657
658 switch (cmd) {
659 default:
660 ret = -EOPNOTSUPP;
661 }
662
663 return ret;
664}
665
666/* Network device is taken down, done by "ifconfig irda0 down" */
667static int mcs_net_close(struct net_device *netdev)
668{
669 int ret = 0;
670 struct mcs_cb *mcs = netdev_priv(netdev);
671
672 /* Stop transmit processing */
673 netif_stop_queue(netdev);
674
Hinko Kocevar0ff80432007-12-16 14:08:22 -0800675 kfree_skb(mcs->rx_buff.skb);
676
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700677 /* kill and free the receive and transmit URBs */
678 usb_kill_urb(mcs->rx_urb);
679 usb_free_urb(mcs->rx_urb);
680 usb_kill_urb(mcs->tx_urb);
681 usb_free_urb(mcs->tx_urb);
682
683 /* Stop and remove instance of IrLAP */
684 if (mcs->irlap)
685 irlap_close(mcs->irlap);
686
687 mcs->irlap = NULL;
688 return ret;
689}
690
691/* Network device is taken up, done by "ifconfig irda0 up" */
692static int mcs_net_open(struct net_device *netdev)
693{
694 struct mcs_cb *mcs = netdev_priv(netdev);
695 char hwname[16];
696 int ret = 0;
697
698 ret = usb_clear_halt(mcs->usbdev,
699 usb_sndbulkpipe(mcs->usbdev, mcs->ep_in));
700 if (ret)
701 goto error1;
702 ret = usb_clear_halt(mcs->usbdev,
703 usb_rcvbulkpipe(mcs->usbdev, mcs->ep_out));
704 if (ret)
705 goto error1;
706
707 ret = mcs_setup_transceiver(mcs);
708 if (ret)
709 goto error1;
710
711 ret = -ENOMEM;
712
713 /* Initialize for SIR/FIR to copy data directly into skb. */
714 mcs->receiving = 0;
715 mcs->rx_buff.truesize = IRDA_SKB_MAX_MTU;
716 mcs->rx_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
717 if (!mcs->rx_buff.skb)
718 goto error1;
719
720 skb_reserve(mcs->rx_buff.skb, 1);
721 mcs->rx_buff.head = mcs->rx_buff.skb->data;
722 do_gettimeofday(&mcs->rx_time);
723
724 /*
725 * Now that everything should be initialized properly,
726 * Open new IrLAP layer instance to take care of us...
727 * Note : will send immediately a speed change...
728 */
729 sprintf(hwname, "usb#%d", mcs->usbdev->devnum);
730 mcs->irlap = irlap_open(netdev, &mcs->qos, hwname);
731 if (!mcs->irlap) {
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700732 IRDA_ERROR("mcs7780: irlap_open failed\n");
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700733 goto error2;
734 }
735
736 if (!mcs_setup_urbs(mcs))
Julia Lawall9b0f1d82010-08-05 10:22:00 +0000737 goto error3;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700738
739 ret = mcs_receive_start(mcs);
740 if (ret)
741 goto error3;
742
743 netif_start_queue(netdev);
744 return 0;
745
746 error3:
747 irlap_close(mcs->irlap);
748 error2:
749 kfree_skb(mcs->rx_buff.skb);
750 error1:
751 return ret;
752}
753
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700754/* Receive callback function. */
David Howells7d12e782006-10-05 14:55:46 +0100755static void mcs_receive_irq(struct urb *urb)
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700756{
757 __u8 *bytes;
758 struct mcs_cb *mcs = urb->context;
759 int i;
760 int ret;
761
762 if (!netif_running(mcs->netdev))
763 return;
764
765 if (urb->status)
766 return;
767
768 if (urb->actual_length > 0) {
769 bytes = urb->transfer_buffer;
770
771 /* MCS returns frames without BOF and EOF
772 * I assume it returns whole frames.
773 */
774 /* SIR speed */
775 if(mcs->speed < 576000) {
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800776 async_unwrap_char(mcs->netdev, &mcs->netdev->stats,
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700777 &mcs->rx_buff, 0xc0);
778
779 for (i = 0; i < urb->actual_length; i++)
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800780 async_unwrap_char(mcs->netdev, &mcs->netdev->stats,
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700781 &mcs->rx_buff, bytes[i]);
782
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800783 async_unwrap_char(mcs->netdev, &mcs->netdev->stats,
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700784 &mcs->rx_buff, 0xc1);
785 }
786 /* MIR speed */
787 else if(mcs->speed == 576000 || mcs->speed == 1152000) {
788 mcs_unwrap_mir(mcs, urb->transfer_buffer,
789 urb->actual_length);
790 }
791 /* FIR speed */
792 else {
793 mcs_unwrap_fir(mcs, urb->transfer_buffer,
794 urb->actual_length);
795 }
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700796 do_gettimeofday(&mcs->rx_time);
797 }
798
799 ret = usb_submit_urb(urb, GFP_ATOMIC);
800}
801
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300802/* Transmit callback function. */
David Howells7d12e782006-10-05 14:55:46 +0100803static void mcs_send_irq(struct urb *urb)
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700804{
805 struct mcs_cb *mcs = urb->context;
806 struct net_device *ndev = mcs->netdev;
807
808 if (unlikely(mcs->new_speed))
809 schedule_work(&mcs->work);
810 else
811 netif_wake_queue(ndev);
812}
813
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300814/* Transmit callback function. */
Stephen Hemminger6518bbb2009-08-31 19:50:50 +0000815static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb,
816 struct net_device *ndev)
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700817{
818 unsigned long flags;
819 struct mcs_cb *mcs;
820 int wraplen;
821 int ret = 0;
822
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700823 netif_stop_queue(ndev);
824 mcs = netdev_priv(ndev);
825
826 spin_lock_irqsave(&mcs->lock, flags);
827
828 mcs->new_speed = irda_get_next_speed(skb);
829 if (likely(mcs->new_speed == mcs->speed))
830 mcs->new_speed = 0;
831
832 /* SIR speed */
833 if(mcs->speed < 576000) {
834 wraplen = mcs_wrap_sir_skb(skb, mcs->out_buf);
835 }
836 /* MIR speed */
837 else if(mcs->speed == 576000 || mcs->speed == 1152000) {
838 wraplen = mcs_wrap_mir_skb(skb, mcs->out_buf);
839 }
840 /* FIR speed */
841 else {
842 wraplen = mcs_wrap_fir_skb(skb, mcs->out_buf);
843 }
844 usb_fill_bulk_urb(mcs->tx_urb, mcs->usbdev,
845 usb_sndbulkpipe(mcs->usbdev, mcs->ep_out),
846 mcs->out_buf, wraplen, mcs_send_irq, mcs);
847
848 if ((ret = usb_submit_urb(mcs->tx_urb, GFP_ATOMIC))) {
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700849 IRDA_ERROR("failed tx_urb: %d\n", ret);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700850 switch (ret) {
851 case -ENODEV:
852 case -EPIPE:
853 break;
854 default:
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800855 mcs->netdev->stats.tx_errors++;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700856 netif_start_queue(ndev);
857 }
858 } else {
Stephen Hemmingeraf049082009-01-06 10:40:43 -0800859 mcs->netdev->stats.tx_packets++;
860 mcs->netdev->stats.tx_bytes += skb->len;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700861 }
862
863 dev_kfree_skb(skb);
864 spin_unlock_irqrestore(&mcs->lock, flags);
Patrick McHardy4bd73ae2009-06-12 03:17:19 +0000865 return NETDEV_TX_OK;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700866}
867
Stephen Hemmingerddc2a922009-03-20 19:35:36 +0000868static const struct net_device_ops mcs_netdev_ops = {
869 .ndo_open = mcs_net_open,
870 .ndo_stop = mcs_net_close,
871 .ndo_start_xmit = mcs_hard_xmit,
872 .ndo_do_ioctl = mcs_net_ioctl,
873};
874
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700875/*
876 * This function is called by the USB subsystem for each new device in the
877 * system. Need to verify the device and if it is, then start handling it.
878 */
879static int mcs_probe(struct usb_interface *intf,
880 const struct usb_device_id *id)
881{
882 struct usb_device *udev = interface_to_usbdev(intf);
883 struct net_device *ndev = NULL;
884 struct mcs_cb *mcs;
885 int ret = -ENOMEM;
886
887 ndev = alloc_irdadev(sizeof(*mcs));
888 if (!ndev)
889 goto error1;
890
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700891 IRDA_DEBUG(1, "MCS7780 USB-IrDA bridge found at %d.\n", udev->devnum);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700892
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700893 SET_NETDEV_DEV(ndev, &intf->dev);
894
895 ret = usb_reset_configuration(udev);
896 if (ret != 0) {
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700897 IRDA_ERROR("mcs7780: usb reset configuration failed\n");
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700898 goto error2;
899 }
900
901 mcs = netdev_priv(ndev);
902 mcs->usbdev = udev;
903 mcs->netdev = ndev;
904 spin_lock_init(&mcs->lock);
905
906 /* Initialize QoS for this device */
907 irda_init_max_qos_capabilies(&mcs->qos);
908
909 /* That's the Rx capability. */
910 mcs->qos.baud_rate.bits &=
911 IR_2400 | IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200
912 | IR_576000 | IR_1152000 | (IR_4000000 << 8);
913
914
915 mcs->qos.min_turn_time.bits &= qos_mtt_bits;
916 irda_qos_bits_to_value(&mcs->qos);
917
918 /* Speed change work initialisation*/
David Howellsc4028952006-11-22 14:57:56 +0000919 INIT_WORK(&mcs->work, mcs_speed_work);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700920
Stephen Hemmingerddc2a922009-03-20 19:35:36 +0000921 ndev->netdev_ops = &mcs_netdev_ops;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700922
Peter Senna Tschudin67340112012-10-05 11:33:04 +0000923 if (!intf->cur_altsetting) {
924 ret = -ENOMEM;
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700925 goto error2;
Peter Senna Tschudin67340112012-10-05 11:33:04 +0000926 }
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700927
928 ret = mcs_find_endpoints(mcs, intf->cur_altsetting->endpoint,
929 intf->cur_altsetting->desc.bNumEndpoints);
930 if (!ret) {
931 ret = -ENODEV;
932 goto error2;
933 }
934
935 ret = register_netdev(ndev);
936 if (ret != 0)
937 goto error2;
938
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700939 IRDA_DEBUG(1, "IrDA: Registered MosChip MCS7780 device as %s\n",
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700940 ndev->name);
941
942 mcs->transceiver_type = transceiver_type;
943 mcs->sir_tweak = sir_tweak;
944 mcs->receive_mode = receive_mode;
945
946 usb_set_intfdata(intf, mcs);
947 return 0;
948
949 error2:
950 free_netdev(ndev);
951
952 error1:
953 return ret;
954}
955
956/* The current device is removed, the USB layer tells us to shut down. */
957static void mcs_disconnect(struct usb_interface *intf)
958{
959 struct mcs_cb *mcs = usb_get_intfdata(intf);
960
961 if (!mcs)
962 return;
963
Tejun Heo23f333a2010-12-12 16:45:14 +0100964 cancel_work_sync(&mcs->work);
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700965
966 unregister_netdev(mcs->netdev);
967 free_netdev(mcs->netdev);
968
969 usb_set_intfdata(intf, NULL);
Samuel Ortiz599b1fa2007-04-20 22:12:07 -0700970 IRDA_DEBUG(0, "MCS7780 now disconnected.\n");
Samuel Ortizc6ae5222006-05-25 16:19:22 -0700971}
972
Greg Kroah-Hartmand632eb12011-11-18 09:44:20 -0800973module_usb_driver(mcs_driver);