blob: fefe9b11e2007cde326d0555e4fdf235fcd9be1f [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*********************************************************************
2 *
3 * Filename: w83977af_ir.h
4 * Version:
5 * Description:
6 * Status: Experimental.
7 * Author: Paul VanderSpek
8 * Created at: Thu Nov 19 13:55:34 1998
9 * Modified at: Tue Jan 11 13:08:19 2000
10 * Modified by: Dag Brattli <dagb@cs.uit.no>
11 *
12 * Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
Jan Engelhardt96de0e22007-10-19 23:21:04 +020019 * Neither Dag Brattli nor University of Tromsø admit liability nor
Linus Torvalds1da177e2005-04-16 15:20:36 -070020 * provide warranty for any of this software. This material is
21 * provided "AS-IS" and at no charge.
22 *
23 ********************************************************************/
24
25#ifndef W83977AF_IR_H
26#define W83977AF_IR_H
27
28#include <asm/io.h>
29#include <linux/types.h>
30
31/* Flags for configuration register CRF0 */
32#define ENBNKSEL 0x01
33#define APEDCRC 0x02
34#define TXW4C 0x04
35#define RXW4C 0x08
36
37/* Bank 0 */
38#define RBR 0x00 /* Receiver buffer register */
39#define TBR 0x00 /* Transmitter buffer register */
40
41#define ICR 0x01 /* Interrupt configuration register */
42#define ICR_ERBRI 0x01 /* Receiver buffer register interrupt */
43#define ICR_ETBREI 0x02 /* Transeiver empty interrupt */
44#define ICR_EUSRI 0x04//* IR status interrupt */
45#define ICR_EHSRI 0x04
46#define ICR_ETXURI 0x04 /* Tx underrun */
47#define ICR_EDMAI 0x10 /* DMA interrupt */
48#define ICR_ETXTHI 0x20 /* Transmitter threshold interrupt */
49#define ICR_EFSFI 0x40 /* Frame status FIFO interrupt */
50#define ICR_ETMRI 0x80 /* Timer interrupt */
51
52#define UFR 0x02 /* FIFO control register */
53#define UFR_EN_FIFO 0x01 /* Enable FIFO's */
54#define UFR_RXF_RST 0x02 /* Reset Rx FIFO */
55#define UFR_TXF_RST 0x04 /* Reset Tx FIFO */
56#define UFR_RXTL 0x80 /* Rx FIFO threshold (set to 16) */
57#define UFR_TXTL 0x20 /* Tx FIFO threshold (set to 17) */
58
59#define ISR 0x02 /* Interrupt status register */
60#define ISR_RXTH_I 0x01 /* Receive threshold interrupt */
61#define ISR_TXEMP_I 0x02 /* Transmitter empty interrupt */
62#define ISR_FEND_I 0x04
63#define ISR_DMA_I 0x10
64#define ISR_TXTH_I 0x20 /* Transmitter threshold interrupt */
65#define ISR_FSF_I 0x40
66#define ISR_TMR_I 0x80 /* Timer interrupt */
67
68#define UCR 0x03 /* Uart control register */
69#define UCR_DLS8 0x03 /* 8N1 */
70
71#define SSR 0x03 /* Sets select register */
72#define SET0 UCR_DLS8 /* Make sure we keep 8N1 */
73#define SET1 (0x80|UCR_DLS8) /* Make sure we keep 8N1 */
74#define SET2 0xE0
75#define SET3 0xE4
76#define SET4 0xE8
77#define SET5 0xEC
78#define SET6 0xF0
79#define SET7 0xF4
80
81#define HCR 0x04
82#define HCR_MODE_MASK ~(0xD0)
83#define HCR_SIR 0x60
84#define HCR_MIR_576 0x20
85#define HCR_MIR_1152 0x80
86#define HCR_FIR 0xA0
87#define HCR_EN_DMA 0x04
88#define HCR_EN_IRQ 0x08
89#define HCR_TX_WT 0x08
90
91#define USR 0x05 /* IR status register */
92#define USR_RDR 0x01 /* Receive data ready */
93#define USR_TSRE 0x40 /* Transmitter empty? */
94
95#define AUDR 0x07
96#define AUDR_SFEND 0x08 /* Set a frame end */
97#define AUDR_RXBSY 0x20 /* Rx busy */
98#define AUDR_UNDR 0x40 /* Transeiver underrun */
99
100/* Set 2 */
101#define ABLL 0x00 /* Advanced baud rate divisor latch (low byte) */
102#define ABHL 0x01 /* Advanced baud rate divisor latch (high byte) */
103
104#define ADCR1 0x02
105#define ADCR1_ADV_SL 0x01
106#define ADCR1_D_CHSW 0x08 /* the specs are wrong. its bit 3, not 4 */
107#define ADCR1_DMA_F 0x02
108
109#define ADCR2 0x04
110#define ADCR2_TXFS32 0x01
111#define ADCR2_RXFS32 0x04
112
113#define RXFDTH 0x07
114
115/* Set 3 */
116#define AUID 0x00
117
118/* Set 4 */
119#define TMRL 0x00 /* Timer value register (low byte) */
120#define TMRH 0x01 /* Timer value register (high byte) */
121
122#define IR_MSL 0x02 /* Infrared mode select */
123#define IR_MSL_EN_TMR 0x01 /* Enable timer */
124
125#define TFRLL 0x04 /* Transmitter frame length (low byte) */
126#define TFRLH 0x05 /* Transmitter frame length (high byte) */
127#define RFRLL 0x06 /* Receiver frame length (low byte) */
128#define RFRLH 0x07 /* Receiver frame length (high byte) */
129
130/* Set 5 */
131
132#define FS_FO 0x05 /* Frame status FIFO */
133#define FS_FO_FSFDR 0x80 /* Frame status FIFO data ready */
134#define FS_FO_LST_FR 0x40 /* Frame lost */
135#define FS_FO_MX_LEX 0x10 /* Max frame len exceeded */
136#define FS_FO_PHY_ERR 0x08 /* Physical layer error */
137#define FS_FO_CRC_ERR 0x04
138#define FS_FO_RX_OV 0x02 /* Receive overrun */
139#define FS_FO_FSF_OV 0x01 /* Frame status FIFO overrun */
140#define FS_FO_ERR_MSK 0x5f /* Error mask */
141
142#define RFLFL 0x06
143#define RFLFH 0x07
144
145/* Set 6 */
146#define IR_CFG2 0x00
147#define IR_CFG2_DIS_CRC 0x02
148
149/* Set 7 */
150#define IRM_CR 0x07 /* Infrared module control register */
151#define IRM_CR_IRX_MSL 0x40
152#define IRM_CR_AF_MNT 0x80 /* Automatic format */
153
154/* For storing entries in the status FIFO */
155struct st_fifo_entry {
156 int status;
157 int len;
158};
159
160struct st_fifo {
161 struct st_fifo_entry entries[10];
162 int head;
163 int tail;
164 int len;
165};
166
167/* Private data for each instance */
168struct w83977af_ir {
169 struct st_fifo st_fifo;
170
171 int tx_buff_offsets[10]; /* Offsets between frames in tx_buff */
172 int tx_len; /* Number of frames in tx_buff */
173
174 struct net_device *netdev; /* Yes! we are some kind of netdevice */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175
176 struct irlap_cb *irlap; /* The link layer we are binded to */
177 struct qos_info qos; /* QoS capabilities for this device */
178
179 chipio_t io; /* IrDA controller information */
180 iobuff_t tx_buff; /* Transmit buffer */
181 iobuff_t rx_buff; /* Receive buffer */
182 dma_addr_t tx_buff_dma;
183 dma_addr_t rx_buff_dma;
184
185 /* Note : currently locking is *very* incomplete, but this
186 * will get you started. Check in nsc-ircc.c for a proper
187 * locking strategy. - Jean II */
188 spinlock_t lock; /* For serializing operations */
189
190 __u32 new_speed;
191};
192
193static inline void switch_bank( int iobase, int set)
194{
195 outb(set, iobase+SSR);
196}
197
198#endif