blob: 643f1113b1d8844c4e2850eff613b152aafcb737 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Sound driver for Silicon Graphics 320 and 540 Visual Workstations'
3 * onboard audio. See notes in Documentation/sound/oss/vwsnd .
4 *
5 * Copyright 1999 Silicon Graphics, Inc. All rights reserved.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21
22#undef VWSND_DEBUG /* define for debugging */
23
24/*
25 * XXX to do -
26 *
27 * External sync.
28 * Rename swbuf, hwbuf, u&i, hwptr&swptr to something rational.
29 * Bug - if select() called before read(), pcm_setup() not called.
30 * Bug - output doesn't stop soon enough if process killed.
31 */
32
33/*
34 * Things to test -
35 *
36 * Will readv/writev work? Write a test.
37 *
38 * insmod/rmmod 100 million times.
39 *
40 * Run I/O until int ptrs wrap around (roughly 6.2 hours @ DAT
41 * rate).
42 *
43 * Concurrent threads banging on mixer simultaneously, both UP
44 * and SMP kernels. Especially, watch for thread A changing
45 * OUTSRC while thread B changes gain -- both write to the same
46 * ad1843 register.
47 *
48 * What happens if a client opens /dev/audio then forks?
49 * Do two procs have /dev/audio open? Test.
50 *
51 * Pump audio through the CD, MIC and line inputs and verify that
52 * they mix/mute into the output.
53 *
54 * Apps:
55 * amp
56 * mpg123
57 * x11amp
58 * mxv
59 * kmedia
60 * esound
61 * need more input apps
62 *
63 * Run tests while bombarding with signals. setitimer(2) will do it... */
64
65/*
66 * This driver is organized in nine sections.
67 * The nine sections are:
68 *
69 * debug stuff
70 * low level lithium access
71 * high level lithium access
72 * AD1843 access
73 * PCM I/O
74 * audio driver
75 * mixer driver
76 * probe/attach/unload
77 * initialization and loadable kernel module interface
78 *
79 * That is roughly the order of increasing abstraction, so forward
80 * dependencies are minimal.
81 */
82
83/*
84 * Locking Notes
85 *
86 * INC_USE_COUNT and DEC_USE_COUNT keep track of the number of
87 * open descriptors to this driver. They store it in vwsnd_use_count.
88 * The global device list, vwsnd_dev_list, is immutable when the IN_USE
89 * is true.
90 *
91 * devc->open_lock is a semaphore that is used to enforce the
92 * single reader/single writer rule for /dev/audio. The rule is
93 * that each device may have at most one reader and one writer.
94 * Open will block until the previous client has closed the
95 * device, unless O_NONBLOCK is specified.
96 *
Ingo Molnar910f5d22006-03-23 03:00:39 -080097 * The semaphore devc->io_mutex serializes PCM I/O syscalls. This
Linus Torvalds1da177e2005-04-16 15:20:36 -070098 * is unnecessary in Linux 2.2, because the kernel lock
99 * serializes read, write, and ioctl globally, but it's there,
100 * ready for the brave, new post-kernel-lock world.
101 *
102 * Locking between interrupt and baselevel is handled by the
103 * "lock" spinlock in vwsnd_port (one lock each for read and
104 * write). Each half holds the lock just long enough to see what
105 * area it owns and update its pointers. See pcm_output() and
106 * pcm_input() for most of the gory stuff.
107 *
Ingo Molnar910f5d22006-03-23 03:00:39 -0800108 * devc->mix_mutex serializes all mixer ioctls. This is also
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109 * redundant because of the kernel lock.
110 *
111 * The lowest level lock is lith->lithium_lock. It is a
112 * spinlock which is held during the two-register tango of
113 * reading/writing an AD1843 register. See
114 * li_{read,write}_ad1843_reg().
115 */
116
117/*
118 * Sample Format Notes
119 *
120 * Lithium's DMA engine has two formats: 16-bit 2's complement
121 * and 8-bit unsigned . 16-bit transfers the data unmodified, 2
122 * bytes per sample. 8-bit unsigned transfers 1 byte per sample
123 * and XORs each byte with 0x80. Lithium can input or output
124 * either mono or stereo in either format.
125 *
126 * The AD1843 has four formats: 16-bit 2's complement, 8-bit
127 * unsigned, 8-bit mu-Law and 8-bit A-Law.
128 *
129 * This driver supports five formats: AFMT_S8, AFMT_U8,
130 * AFMT_MU_LAW, AFMT_A_LAW, and AFMT_S16_LE.
131 *
132 * For AFMT_U8 output, we keep the AD1843 in 16-bit mode, and
133 * rely on Lithium's XOR to translate between U8 and S8.
134 *
135 * For AFMT_S8, AFMT_MU_LAW and AFMT_A_LAW output, we have to XOR
136 * the 0x80 bit in software to compensate for Lithium's XOR.
137 * This happens in pcm_copy_{in,out}().
138 *
139 * Changes:
140 * 11-10-2000 Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
141 * Added some __init/__exit
142 */
143
144#include <linux/module.h>
145#include <linux/init.h>
146
147#include <linux/spinlock.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148#include <linux/wait.h>
149#include <linux/interrupt.h>
Ingo Molnar910f5d22006-03-23 03:00:39 -0800150#include <linux/mutex.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +0900151#include <linux/slab.h>
Ingo Molnar910f5d22006-03-23 03:00:39 -0800152
Ingo Molnar8a55a00a2008-07-10 19:35:33 +0200153#include <asm/visws/cobalt.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154
155#include "sound_config.h"
156
157/*****************************************************************************/
158/* debug stuff */
159
160#ifdef VWSND_DEBUG
161
Arnd Bergmann645ef9e2010-09-14 21:53:41 +0200162static DEFINE_MUTEX(vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700163static int shut_up = 1;
164
165/*
166 * dbgassert - called when an assertion fails.
167 */
168
169static void dbgassert(const char *fcn, int line, const char *expr)
170{
171 if (in_interrupt())
172 panic("ASSERTION FAILED IN INTERRUPT, %s:%s:%d %s\n",
173 __FILE__, fcn, line, expr);
174 else {
175 int x;
176 printk(KERN_ERR "ASSERTION FAILED, %s:%s:%d %s\n",
177 __FILE__, fcn, line, expr);
178 x = * (volatile int *) 0; /* force proc to exit */
179 }
180}
181
182/*
183 * Bunch of useful debug macros:
184 *
185 * ASSERT - print unless e nonzero (panic if in interrupt)
186 * DBGDO - include arbitrary code if debugging
187 * DBGX - debug print raw (w/o function name)
188 * DBGP - debug print w/ function name
189 * DBGE - debug print function entry
190 * DBGC - debug print function call
191 * DBGR - debug print function return
192 * DBGXV - debug print raw when verbose
193 * DBGPV - debug print when verbose
194 * DBGEV - debug print function entry when verbose
195 * DBGRV - debug print function return when verbose
196 */
197
Harvey Harrison9bf8e7d2008-03-03 15:32:18 -0800198#define ASSERT(e) ((e) ? (void) 0 : dbgassert(__func__, __LINE__, #e))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700199#define DBGDO(x) x
200#define DBGX(fmt, args...) (in_interrupt() ? 0 : printk(KERN_ERR fmt, ##args))
Harvey Harrison9bf8e7d2008-03-03 15:32:18 -0800201#define DBGP(fmt, args...) (DBGX("%s: " fmt, __func__ , ##args))
202#define DBGE(fmt, args...) (DBGX("%s" fmt, __func__ , ##args))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700203#define DBGC(rtn) (DBGP("calling %s\n", rtn))
204#define DBGR() (DBGP("returning\n"))
205#define DBGXV(fmt, args...) (shut_up ? 0 : DBGX(fmt, ##args))
206#define DBGPV(fmt, args...) (shut_up ? 0 : DBGP(fmt, ##args))
207#define DBGEV(fmt, args...) (shut_up ? 0 : DBGE(fmt, ##args))
208#define DBGCV(rtn) (shut_up ? 0 : DBGC(rtn))
209#define DBGRV() (shut_up ? 0 : DBGR())
210
211#else /* !VWSND_DEBUG */
212
213#define ASSERT(e) ((void) 0)
214#define DBGDO(x) /* don't */
215#define DBGX(fmt, args...) ((void) 0)
216#define DBGP(fmt, args...) ((void) 0)
217#define DBGE(fmt, args...) ((void) 0)
218#define DBGC(rtn) ((void) 0)
219#define DBGR() ((void) 0)
220#define DBGPV(fmt, args...) ((void) 0)
221#define DBGXV(fmt, args...) ((void) 0)
222#define DBGEV(fmt, args...) ((void) 0)
223#define DBGCV(rtn) ((void) 0)
224#define DBGRV() ((void) 0)
225
226#endif /* !VWSND_DEBUG */
227
228/*****************************************************************************/
229/* low level lithium access */
230
231/*
232 * We need to talk to Lithium registers on three pages. Here are
233 * the pages' offsets from the base address (0xFF001000).
234 */
235
236enum {
237 LI_PAGE0_OFFSET = 0x01000 - 0x1000, /* FF001000 */
238 LI_PAGE1_OFFSET = 0x0F000 - 0x1000, /* FF00F000 */
239 LI_PAGE2_OFFSET = 0x10000 - 0x1000, /* FF010000 */
240};
241
242/* low-level lithium data */
243
244typedef struct lithium {
245 void * page0; /* virtual addresses */
246 void * page1;
247 void * page2;
248 spinlock_t lock; /* protects codec and UST/MSC access */
249} lithium_t;
250
251/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700252 * li_destroy destroys the lithium_t structure and vm mappings.
253 */
254
255static void li_destroy(lithium_t *lith)
256{
257 if (lith->page0) {
258 iounmap(lith->page0);
259 lith->page0 = NULL;
260 }
261 if (lith->page1) {
262 iounmap(lith->page1);
263 lith->page1 = NULL;
264 }
265 if (lith->page2) {
266 iounmap(lith->page2);
267 lith->page2 = NULL;
268 }
269}
270
271/*
Eric Sesterhenn8f3b50f2006-03-26 01:37:37 -0800272 * li_create initializes the lithium_t structure and sets up vm mappings
273 * to access the registers.
274 * Returns 0 on success, -errno on failure.
275 */
276
277static int __init li_create(lithium_t *lith, unsigned long baseaddr)
278{
279 spin_lock_init(&lith->lock);
280 lith->page0 = ioremap_nocache(baseaddr + LI_PAGE0_OFFSET, PAGE_SIZE);
281 lith->page1 = ioremap_nocache(baseaddr + LI_PAGE1_OFFSET, PAGE_SIZE);
282 lith->page2 = ioremap_nocache(baseaddr + LI_PAGE2_OFFSET, PAGE_SIZE);
283 if (!lith->page0 || !lith->page1 || !lith->page2) {
284 li_destroy(lith);
285 return -ENOMEM;
286 }
287 return 0;
288}
289
290/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700291 * basic register accessors - read/write long/byte
292 */
293
294static __inline__ unsigned long li_readl(lithium_t *lith, int off)
295{
296 return * (volatile unsigned long *) (lith->page0 + off);
297}
298
299static __inline__ unsigned char li_readb(lithium_t *lith, int off)
300{
301 return * (volatile unsigned char *) (lith->page0 + off);
302}
303
304static __inline__ void li_writel(lithium_t *lith, int off, unsigned long val)
305{
306 * (volatile unsigned long *) (lith->page0 + off) = val;
307}
308
309static __inline__ void li_writeb(lithium_t *lith, int off, unsigned char val)
310{
311 * (volatile unsigned char *) (lith->page0 + off) = val;
312}
313
314/*****************************************************************************/
315/* High Level Lithium Access */
316
317/*
318 * Lithium DMA Notes
319 *
320 * Lithium has two dedicated DMA channels for audio. They are known
321 * as comm1 and comm2 (communication areas 1 and 2). Comm1 is for
322 * input, and comm2 is for output. Each is controlled by three
323 * registers: BASE (base address), CFG (config) and CCTL
324 * (config/control).
325 *
326 * Each DMA channel points to a physically contiguous ring buffer in
327 * main memory of up to 8 Kbytes. (This driver always uses 8 Kb.)
328 * There are three pointers into the ring buffer: read, write, and
329 * trigger. The pointers are 8 bits each. Each pointer points to
330 * 32-byte "chunks" of data. The DMA engine moves 32 bytes at a time,
331 * so there is no finer-granularity control.
332 *
333 * In comm1, the hardware updates the write ptr, and software updates
334 * the read ptr. In comm2, it's the opposite: hardware updates the
335 * read ptr, and software updates the write ptr. I designate the
336 * hardware-updated ptr as the hwptr, and the software-updated ptr as
337 * the swptr.
338 *
339 * The trigger ptr and trigger mask are used to trigger interrupts.
340 * From the Lithium spec, section 5.6.8, revision of 12/15/1998:
341 *
342 * Trigger Mask Value
343 *
344 * A three bit wide field that represents a power of two mask
345 * that is used whenever the trigger pointer is compared to its
346 * respective read or write pointer. A value of zero here
347 * implies a mask of 0xFF and a value of seven implies a mask
348 * 0x01. This value can be used to sub-divide the ring buffer
349 * into pie sections so that interrupts monitor the progress of
350 * hardware from section to section.
351 *
352 * My interpretation of that is, whenever the hw ptr is updated, it is
353 * compared with the trigger ptr, and the result is masked by the
354 * trigger mask. (Actually, by the complement of the trigger mask.)
355 * If the result is zero, an interrupt is triggered. I.e., interrupt
356 * if ((hwptr & ~mask) == (trptr & ~mask)). The mask is formed from
357 * the trigger register value as mask = (1 << (8 - tmreg)) - 1.
358 *
359 * In yet different words, setting tmreg to 0 causes an interrupt after
360 * every 256 DMA chunks (8192 bytes) or once per traversal of the
361 * ring buffer. Setting it to 7 caues an interrupt every 2 DMA chunks
362 * (64 bytes) or 128 times per traversal of the ring buffer.
363 */
364
365/* Lithium register offsets and bit definitions */
366
367#define LI_HOST_CONTROLLER 0x000
368# define LI_HC_RESET 0x00008000
369# define LI_HC_LINK_ENABLE 0x00004000
370# define LI_HC_LINK_FAILURE 0x00000004
371# define LI_HC_LINK_CODEC 0x00000002
372# define LI_HC_LINK_READY 0x00000001
373
374#define LI_INTR_STATUS 0x010
375#define LI_INTR_MASK 0x014
376# define LI_INTR_LINK_ERR 0x00008000
377# define LI_INTR_COMM2_TRIG 0x00000008
378# define LI_INTR_COMM2_UNDERFLOW 0x00000004
379# define LI_INTR_COMM1_TRIG 0x00000002
380# define LI_INTR_COMM1_OVERFLOW 0x00000001
381
382#define LI_CODEC_COMMAND 0x018
383# define LI_CC_BUSY 0x00008000
384# define LI_CC_DIR 0x00000080
385# define LI_CC_DIR_RD LI_CC_DIR
386# define LI_CC_DIR_WR (!LI_CC_DIR)
387# define LI_CC_ADDR_MASK 0x0000007F
388
389#define LI_CODEC_DATA 0x01C
390
391#define LI_COMM1_BASE 0x100
392#define LI_COMM1_CTL 0x104
393# define LI_CCTL_RESET 0x80000000
394# define LI_CCTL_SIZE 0x70000000
395# define LI_CCTL_DMA_ENABLE 0x08000000
396# define LI_CCTL_TMASK 0x07000000 /* trigger mask */
397# define LI_CCTL_TPTR 0x00FF0000 /* trigger pointer */
398# define LI_CCTL_RPTR 0x0000FF00
399# define LI_CCTL_WPTR 0x000000FF
400#define LI_COMM1_CFG 0x108
401# define LI_CCFG_LOCK 0x00008000
402# define LI_CCFG_SLOT 0x00000070
403# define LI_CCFG_DIRECTION 0x00000008
404# define LI_CCFG_DIR_IN (!LI_CCFG_DIRECTION)
405# define LI_CCFG_DIR_OUT LI_CCFG_DIRECTION
406# define LI_CCFG_MODE 0x00000004
407# define LI_CCFG_MODE_MONO (!LI_CCFG_MODE)
408# define LI_CCFG_MODE_STEREO LI_CCFG_MODE
409# define LI_CCFG_FORMAT 0x00000003
410# define LI_CCFG_FMT_8BIT 0x00000000
411# define LI_CCFG_FMT_16BIT 0x00000001
412#define LI_COMM2_BASE 0x10C
413#define LI_COMM2_CTL 0x110
414 /* bit definitions are the same as LI_COMM1_CTL */
415#define LI_COMM2_CFG 0x114
416 /* bit definitions are the same as LI_COMM1_CFG */
417
418#define LI_UST_LOW 0x200 /* 64-bit Unadjusted System Time is */
419#define LI_UST_HIGH 0x204 /* microseconds since boot */
420
421#define LI_AUDIO1_UST 0x300 /* UST-MSC pairs */
422#define LI_AUDIO1_MSC 0x304 /* MSC (Media Stream Counter) */
423#define LI_AUDIO2_UST 0x308 /* counts samples actually */
424#define LI_AUDIO2_MSC 0x30C /* processed as of time UST */
425
426/*
427 * Lithium's DMA engine operates on chunks of 32 bytes. We call that
428 * a DMACHUNK.
429 */
430
431#define DMACHUNK_SHIFT 5
432#define DMACHUNK_SIZE (1 << DMACHUNK_SHIFT)
433#define BYTES_TO_CHUNKS(bytes) ((bytes) >> DMACHUNK_SHIFT)
434#define CHUNKS_TO_BYTES(chunks) ((chunks) << DMACHUNK_SHIFT)
435
436/*
437 * Two convenient macros to shift bitfields into/out of position.
438 *
439 * Observe that (mask & -mask) is (1 << low_set_bit_of(mask)).
440 * As long as mask is constant, we trust the compiler will change the
441 * multipy and divide into shifts.
442 */
443
444#define SHIFT_FIELD(val, mask) (((val) * ((mask) & -(mask))) & (mask))
445#define UNSHIFT_FIELD(val, mask) (((val) & (mask)) / ((mask) & -(mask)))
446
447/*
448 * dma_chan_desc is invariant information about a Lithium
449 * DMA channel. There are two instances, li_comm1 and li_comm2.
450 *
451 * Note that the CCTL register fields are write ptr and read ptr, but what
452 * we care about are which pointer is updated by software and which by
453 * hardware.
454 */
455
456typedef struct dma_chan_desc {
457 int basereg;
458 int cfgreg;
459 int ctlreg;
460 int hwptrreg;
461 int swptrreg;
462 int ustreg;
463 int mscreg;
464 unsigned long swptrmask;
465 int ad1843_slot;
466 int direction; /* LI_CCTL_DIR_IN/OUT */
467} dma_chan_desc_t;
468
469static const dma_chan_desc_t li_comm1 = {
470 LI_COMM1_BASE, /* base register offset */
471 LI_COMM1_CFG, /* config register offset */
472 LI_COMM1_CTL, /* control register offset */
473 LI_COMM1_CTL + 0, /* hw ptr reg offset (write ptr) */
474 LI_COMM1_CTL + 1, /* sw ptr reg offset (read ptr) */
475 LI_AUDIO1_UST, /* ust reg offset */
476 LI_AUDIO1_MSC, /* msc reg offset */
477 LI_CCTL_RPTR, /* sw ptr bitmask in ctlval */
478 2, /* ad1843 serial slot */
479 LI_CCFG_DIR_IN /* direction */
480};
481
482static const dma_chan_desc_t li_comm2 = {
483 LI_COMM2_BASE, /* base register offset */
484 LI_COMM2_CFG, /* config register offset */
485 LI_COMM2_CTL, /* control register offset */
486 LI_COMM2_CTL + 1, /* hw ptr reg offset (read ptr) */
487 LI_COMM2_CTL + 0, /* sw ptr reg offset (writr ptr) */
488 LI_AUDIO2_UST, /* ust reg offset */
489 LI_AUDIO2_MSC, /* msc reg offset */
490 LI_CCTL_WPTR, /* sw ptr bitmask in ctlval */
491 2, /* ad1843 serial slot */
492 LI_CCFG_DIR_OUT /* direction */
493};
494
495/*
496 * dma_chan is variable information about a Lithium DMA channel.
497 *
498 * The desc field points to invariant information.
499 * The lith field points to a lithium_t which is passed
500 * to li_read* and li_write* to access the registers.
501 * The *val fields shadow the lithium registers' contents.
502 */
503
504typedef struct dma_chan {
505 const dma_chan_desc_t *desc;
506 lithium_t *lith;
507 unsigned long baseval;
508 unsigned long cfgval;
509 unsigned long ctlval;
510} dma_chan_t;
511
512/*
513 * ustmsc is a UST/MSC pair (Unadjusted System Time/Media Stream Counter).
514 * UST is time in microseconds since the system booted, and MSC is a
515 * counter that increments with every audio sample.
516 */
517
518typedef struct ustmsc {
519 unsigned long long ust;
520 unsigned long msc;
521} ustmsc_t;
522
523/*
524 * li_ad1843_wait waits until lithium says the AD1843 register
525 * exchange is not busy. Returns 0 on success, -EBUSY on timeout.
526 *
527 * Locking: must be called with lithium_lock held.
528 */
529
530static int li_ad1843_wait(lithium_t *lith)
531{
532 unsigned long later = jiffies + 2;
533 while (li_readl(lith, LI_CODEC_COMMAND) & LI_CC_BUSY)
534 if (time_after_eq(jiffies, later))
535 return -EBUSY;
536 return 0;
537}
538
539/*
540 * li_read_ad1843_reg returns the current contents of a 16 bit AD1843 register.
541 *
542 * Returns unsigned register value on success, -errno on failure.
543 */
544
545static int li_read_ad1843_reg(lithium_t *lith, int reg)
546{
547 int val;
548
549 ASSERT(!in_interrupt());
550 spin_lock(&lith->lock);
551 {
552 val = li_ad1843_wait(lith);
553 if (val == 0) {
554 li_writel(lith, LI_CODEC_COMMAND, LI_CC_DIR_RD | reg);
555 val = li_ad1843_wait(lith);
556 }
557 if (val == 0)
558 val = li_readl(lith, LI_CODEC_DATA);
559 }
560 spin_unlock(&lith->lock);
561
562 DBGXV("li_read_ad1843_reg(lith=0x%p, reg=%d) returns 0x%04x\n",
563 lith, reg, val);
564
565 return val;
566}
567
568/*
569 * li_write_ad1843_reg writes the specified value to a 16 bit AD1843 register.
570 */
571
572static void li_write_ad1843_reg(lithium_t *lith, int reg, int newval)
573{
574 spin_lock(&lith->lock);
575 {
576 if (li_ad1843_wait(lith) == 0) {
577 li_writel(lith, LI_CODEC_DATA, newval);
578 li_writel(lith, LI_CODEC_COMMAND, LI_CC_DIR_WR | reg);
579 }
580 }
581 spin_unlock(&lith->lock);
582}
583
584/*
585 * li_setup_dma calculates all the register settings for DMA in a particular
586 * mode. It takes too many arguments.
587 */
588
589static void li_setup_dma(dma_chan_t *chan,
590 const dma_chan_desc_t *desc,
591 lithium_t *lith,
592 unsigned long buffer_paddr,
593 int bufshift,
594 int fragshift,
595 int channels,
596 int sampsize)
597{
598 unsigned long mode, format;
599 unsigned long size, tmask;
600
601 DBGEV("(chan=0x%p, desc=0x%p, lith=0x%p, buffer_paddr=0x%lx, "
602 "bufshift=%d, fragshift=%d, channels=%d, sampsize=%d)\n",
603 chan, desc, lith, buffer_paddr,
604 bufshift, fragshift, channels, sampsize);
605
606 /* Reset the channel first. */
607
608 li_writel(lith, desc->ctlreg, LI_CCTL_RESET);
609
610 ASSERT(channels == 1 || channels == 2);
611 if (channels == 2)
612 mode = LI_CCFG_MODE_STEREO;
613 else
614 mode = LI_CCFG_MODE_MONO;
615 ASSERT(sampsize == 1 || sampsize == 2);
616 if (sampsize == 2)
617 format = LI_CCFG_FMT_16BIT;
618 else
619 format = LI_CCFG_FMT_8BIT;
620 chan->desc = desc;
621 chan->lith = lith;
622
623 /*
624 * Lithium DMA address register takes a 40-bit physical
625 * address, right-shifted by 8 so it fits in 32 bits. Bit 37
626 * must be set -- it enables cache coherence.
627 */
628
629 ASSERT(!(buffer_paddr & 0xFF));
630 chan->baseval = (buffer_paddr >> 8) | 1 << (37 - 8);
631
Roel Kluinf1d269b2009-08-26 12:01:20 +0200632 chan->cfgval = ((chan->cfgval & ~LI_CCFG_LOCK) |
Linus Torvalds1da177e2005-04-16 15:20:36 -0700633 SHIFT_FIELD(desc->ad1843_slot, LI_CCFG_SLOT) |
634 desc->direction |
635 mode |
636 format);
637
638 size = bufshift - 6;
639 tmask = 13 - fragshift; /* See Lithium DMA Notes above. */
640 ASSERT(size >= 2 && size <= 7);
641 ASSERT(tmask >= 1 && tmask <= 7);
Roel Kluinf1d269b2009-08-26 12:01:20 +0200642 chan->ctlval = ((chan->ctlval & ~LI_CCTL_RESET) |
Linus Torvalds1da177e2005-04-16 15:20:36 -0700643 SHIFT_FIELD(size, LI_CCTL_SIZE) |
Roel Kluinf1d269b2009-08-26 12:01:20 +0200644 (chan->ctlval & ~LI_CCTL_DMA_ENABLE) |
Linus Torvalds1da177e2005-04-16 15:20:36 -0700645 SHIFT_FIELD(tmask, LI_CCTL_TMASK) |
646 SHIFT_FIELD(0, LI_CCTL_TPTR));
647
648 DBGPV("basereg 0x%x = 0x%lx\n", desc->basereg, chan->baseval);
649 DBGPV("cfgreg 0x%x = 0x%lx\n", desc->cfgreg, chan->cfgval);
650 DBGPV("ctlreg 0x%x = 0x%lx\n", desc->ctlreg, chan->ctlval);
651
652 li_writel(lith, desc->basereg, chan->baseval);
653 li_writel(lith, desc->cfgreg, chan->cfgval);
654 li_writel(lith, desc->ctlreg, chan->ctlval);
655
656 DBGRV();
657}
658
659static void li_shutdown_dma(dma_chan_t *chan)
660{
661 lithium_t *lith = chan->lith;
662 void * lith1 = lith->page1;
663
664 DBGEV("(chan=0x%p)\n", chan);
665
666 chan->ctlval &= ~LI_CCTL_DMA_ENABLE;
667 DBGPV("ctlreg 0x%x = 0x%lx\n", chan->desc->ctlreg, chan->ctlval);
668 li_writel(lith, chan->desc->ctlreg, chan->ctlval);
669
670 /*
671 * Offset 0x500 on Lithium page 1 is an undocumented,
672 * unsupported register that holds the zero sample value.
673 * Lithium is supposed to output zero samples when DMA is
674 * inactive, and repeat the last sample when DMA underflows.
675 * But it has a bug, where, after underflow occurs, the zero
676 * sample is not reset.
677 *
678 * I expect this to break in a future rev of Lithium.
679 */
680
681 if (lith1 && chan->desc->direction == LI_CCFG_DIR_OUT)
682 * (volatile unsigned long *) (lith1 + 0x500) = 0;
683}
684
685/*
686 * li_activate_dma always starts dma at the beginning of the buffer.
687 *
688 * N.B., these may be called from interrupt.
689 */
690
691static __inline__ void li_activate_dma(dma_chan_t *chan)
692{
693 chan->ctlval |= LI_CCTL_DMA_ENABLE;
694 DBGPV("ctlval = 0x%lx\n", chan->ctlval);
695 li_writel(chan->lith, chan->desc->ctlreg, chan->ctlval);
696}
697
698static void li_deactivate_dma(dma_chan_t *chan)
699{
700 lithium_t *lith = chan->lith;
701 void * lith2 = lith->page2;
702
703 chan->ctlval &= ~(LI_CCTL_DMA_ENABLE | LI_CCTL_RPTR | LI_CCTL_WPTR);
704 DBGPV("ctlval = 0x%lx\n", chan->ctlval);
705 DBGPV("ctlreg 0x%x = 0x%lx\n", chan->desc->ctlreg, chan->ctlval);
706 li_writel(lith, chan->desc->ctlreg, chan->ctlval);
707
708 /*
709 * Offsets 0x98 and 0x9C on Lithium page 2 are undocumented,
710 * unsupported registers that are internal copies of the DMA
711 * read and write pointers. Because of a Lithium bug, these
712 * registers aren't zeroed correctly when DMA is shut off. So
713 * we whack them directly.
714 *
715 * I expect this to break in a future rev of Lithium.
716 */
717
718 if (lith2 && chan->desc->direction == LI_CCFG_DIR_OUT) {
719 * (volatile unsigned long *) (lith2 + 0x98) = 0;
720 * (volatile unsigned long *) (lith2 + 0x9C) = 0;
721 }
722}
723
724/*
725 * read/write the ring buffer pointers. These routines' arguments and results
726 * are byte offsets from the beginning of the ring buffer.
727 */
728
729static __inline__ int li_read_swptr(dma_chan_t *chan)
730{
731 const unsigned long mask = chan->desc->swptrmask;
732
733 return CHUNKS_TO_BYTES(UNSHIFT_FIELD(chan->ctlval, mask));
734}
735
736static __inline__ int li_read_hwptr(dma_chan_t *chan)
737{
738 return CHUNKS_TO_BYTES(li_readb(chan->lith, chan->desc->hwptrreg));
739}
740
741static __inline__ void li_write_swptr(dma_chan_t *chan, int val)
742{
743 const unsigned long mask = chan->desc->swptrmask;
744
745 ASSERT(!(val & ~CHUNKS_TO_BYTES(0xFF)));
746 val = BYTES_TO_CHUNKS(val);
747 chan->ctlval = (chan->ctlval & ~mask) | SHIFT_FIELD(val, mask);
748 li_writeb(chan->lith, chan->desc->swptrreg, val);
749}
750
751/* li_read_USTMSC() returns a UST/MSC pair for the given channel. */
752
753static void li_read_USTMSC(dma_chan_t *chan, ustmsc_t *ustmsc)
754{
755 lithium_t *lith = chan->lith;
756 const dma_chan_desc_t *desc = chan->desc;
757 unsigned long now_low, now_high0, now_high1, chan_ust;
758
759 spin_lock(&lith->lock);
760 {
761 /*
762 * retry until we do all five reads without the
763 * high word changing. (High word increments
764 * every 2^32 microseconds, i.e., not often)
765 */
766 do {
767 now_high0 = li_readl(lith, LI_UST_HIGH);
768 now_low = li_readl(lith, LI_UST_LOW);
769
770 /*
771 * Lithium guarantees these two reads will be
772 * atomic -- ust will not increment after msc
773 * is read.
774 */
775
776 ustmsc->msc = li_readl(lith, desc->mscreg);
777 chan_ust = li_readl(lith, desc->ustreg);
778
779 now_high1 = li_readl(lith, LI_UST_HIGH);
780 } while (now_high0 != now_high1);
781 }
782 spin_unlock(&lith->lock);
783 ustmsc->ust = ((unsigned long long) now_high0 << 32 | chan_ust);
784}
785
786static void li_enable_interrupts(lithium_t *lith, unsigned int mask)
787{
788 DBGEV("(lith=0x%p, mask=0x%x)\n", lith, mask);
789
790 /* clear any already-pending interrupts. */
791
792 li_writel(lith, LI_INTR_STATUS, mask);
793
794 /* enable the interrupts. */
795
796 mask |= li_readl(lith, LI_INTR_MASK);
797 li_writel(lith, LI_INTR_MASK, mask);
798}
799
800static void li_disable_interrupts(lithium_t *lith, unsigned int mask)
801{
802 unsigned int keepmask;
803
804 DBGEV("(lith=0x%p, mask=0x%x)\n", lith, mask);
805
806 /* disable the interrupts */
807
808 keepmask = li_readl(lith, LI_INTR_MASK) & ~mask;
809 li_writel(lith, LI_INTR_MASK, keepmask);
810
811 /* clear any pending interrupts. */
812
813 li_writel(lith, LI_INTR_STATUS, mask);
814}
815
816/* Get the interrupt status and clear all pending interrupts. */
817
818static unsigned int li_get_clear_intr_status(lithium_t *lith)
819{
820 unsigned int status;
821
822 status = li_readl(lith, LI_INTR_STATUS);
823 li_writel(lith, LI_INTR_STATUS, ~0);
824 return status & li_readl(lith, LI_INTR_MASK);
825}
826
827static int li_init(lithium_t *lith)
828{
829 /* 1. System power supplies stabilize. */
830
831 /* 2. Assert the ~RESET signal. */
832
833 li_writel(lith, LI_HOST_CONTROLLER, LI_HC_RESET);
834 udelay(1);
835
836 /* 3. Deassert the ~RESET signal and enter a wait period to allow
837 the AD1843 internal clocks and the external crystal oscillator
838 to stabilize. */
839
840 li_writel(lith, LI_HOST_CONTROLLER, LI_HC_LINK_ENABLE);
841 udelay(1);
842
843 return 0;
844}
845
846/*****************************************************************************/
847/* AD1843 access */
848
849/*
850 * AD1843 bitfield definitions. All are named as in the AD1843 data
851 * sheet, with ad1843_ prepended and individual bit numbers removed.
852 *
853 * E.g., bits LSS0 through LSS2 become ad1843_LSS.
854 *
855 * Only the bitfields we need are defined.
856 */
857
858typedef struct ad1843_bitfield {
859 char reg;
860 char lo_bit;
861 char nbits;
862} ad1843_bitfield_t;
863
864static const ad1843_bitfield_t
865 ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */
866 ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */
867 ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */
868 ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */
869 ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */
870 ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */
871 ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */
872 ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */
873 ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */
874 ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */
875 ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */
876 ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */
877 ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */
878 ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */
879 ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */
880 ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */
881 ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */
882 ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */
883 ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */
884 ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */
885 ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */
886 ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */
887 ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */
888 ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */
889 ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */
890 ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */
891 ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */
892 ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */
893 ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */
894 ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */
895 ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */
896 ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */
897 ad1843_C2C = { 20, 0, 16 }, /* Clock 1 Sample Rate Select */
898 ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */
899 ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */
900 ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */
901 ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */
902 ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */
903 ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */
904 ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */
905 ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */
906 ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */
907 ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */
908 ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */
909 ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */
910 ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */
911 ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */
912 ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */
913 ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */
914 ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */
915 ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */
916
917/*
918 * The various registers of the AD1843 use three different formats for
919 * specifying gain. The ad1843_gain structure parameterizes the
920 * formats.
921 */
922
923typedef struct ad1843_gain {
924
925 int negative; /* nonzero if gain is negative. */
926 const ad1843_bitfield_t *lfield;
927 const ad1843_bitfield_t *rfield;
928
929} ad1843_gain_t;
930
931static const ad1843_gain_t ad1843_gain_RECLEV
932 = { 0, &ad1843_LIG, &ad1843_RIG };
933static const ad1843_gain_t ad1843_gain_LINE
934 = { 1, &ad1843_LX1M, &ad1843_RX1M };
935static const ad1843_gain_t ad1843_gain_CD
936 = { 1, &ad1843_LX2M, &ad1843_RX2M };
937static const ad1843_gain_t ad1843_gain_MIC
938 = { 1, &ad1843_LMCM, &ad1843_RMCM };
939static const ad1843_gain_t ad1843_gain_PCM
940 = { 1, &ad1843_LDA1G, &ad1843_RDA1G };
941
942/* read the current value of an AD1843 bitfield. */
943
944static int ad1843_read_bits(lithium_t *lith, const ad1843_bitfield_t *field)
945{
946 int w = li_read_ad1843_reg(lith, field->reg);
947 int val = w >> field->lo_bit & ((1 << field->nbits) - 1);
948
949 DBGXV("ad1843_read_bits(lith=0x%p, field->{%d %d %d}) returns 0x%x\n",
950 lith, field->reg, field->lo_bit, field->nbits, val);
951
952 return val;
953}
954
955/*
956 * write a new value to an AD1843 bitfield and return the old value.
957 */
958
959static int ad1843_write_bits(lithium_t *lith,
960 const ad1843_bitfield_t *field,
961 int newval)
962{
963 int w = li_read_ad1843_reg(lith, field->reg);
964 int mask = ((1 << field->nbits) - 1) << field->lo_bit;
965 int oldval = (w & mask) >> field->lo_bit;
966 int newbits = (newval << field->lo_bit) & mask;
967 w = (w & ~mask) | newbits;
968 (void) li_write_ad1843_reg(lith, field->reg, w);
969
970 DBGXV("ad1843_write_bits(lith=0x%p, field->{%d %d %d}, val=0x%x) "
971 "returns 0x%x\n",
972 lith, field->reg, field->lo_bit, field->nbits, newval,
973 oldval);
974
975 return oldval;
976}
977
978/*
979 * ad1843_read_multi reads multiple bitfields from the same AD1843
980 * register. It uses a single read cycle to do it. (Reading the
981 * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20
982 * microseconds.)
983 *
984 * Called ike this.
985 *
986 * ad1843_read_multi(lith, nfields,
987 * &ad1843_FIELD1, &val1,
988 * &ad1843_FIELD2, &val2, ...);
989 */
990
991static void ad1843_read_multi(lithium_t *lith, int argcount, ...)
992{
993 va_list ap;
994 const ad1843_bitfield_t *fp;
995 int w = 0, mask, *value, reg = -1;
996
997 va_start(ap, argcount);
998 while (--argcount >= 0) {
999 fp = va_arg(ap, const ad1843_bitfield_t *);
1000 value = va_arg(ap, int *);
1001 if (reg == -1) {
1002 reg = fp->reg;
1003 w = li_read_ad1843_reg(lith, reg);
1004 }
1005 ASSERT(reg == fp->reg);
1006 mask = (1 << fp->nbits) - 1;
1007 *value = w >> fp->lo_bit & mask;
1008 }
1009 va_end(ap);
1010}
1011
1012/*
1013 * ad1843_write_multi stores multiple bitfields into the same AD1843
1014 * register. It uses one read and one write cycle to do it.
1015 *
1016 * Called like this.
1017 *
1018 * ad1843_write_multi(lith, nfields,
1019 * &ad1843_FIELD1, val1,
1020 * &ad1843_FIELF2, val2, ...);
1021 */
1022
1023static void ad1843_write_multi(lithium_t *lith, int argcount, ...)
1024{
1025 va_list ap;
1026 int reg;
1027 const ad1843_bitfield_t *fp;
1028 int value;
1029 int w, m, mask, bits;
1030
1031 mask = 0;
1032 bits = 0;
1033 reg = -1;
1034
1035 va_start(ap, argcount);
1036 while (--argcount >= 0) {
1037 fp = va_arg(ap, const ad1843_bitfield_t *);
1038 value = va_arg(ap, int);
1039 if (reg == -1)
1040 reg = fp->reg;
1041 ASSERT(fp->reg == reg);
1042 m = ((1 << fp->nbits) - 1) << fp->lo_bit;
1043 mask |= m;
1044 bits |= (value << fp->lo_bit) & m;
1045 }
1046 va_end(ap);
1047 ASSERT(!(bits & ~mask));
1048 if (~mask & 0xFFFF)
1049 w = li_read_ad1843_reg(lith, reg);
1050 else
1051 w = 0;
1052 w = (w & ~mask) | bits;
1053 (void) li_write_ad1843_reg(lith, reg, w);
1054}
1055
1056/*
1057 * ad1843_get_gain reads the specified register and extracts the gain value
1058 * using the supplied gain type. It returns the gain in OSS format.
1059 */
1060
1061static int ad1843_get_gain(lithium_t *lith, const ad1843_gain_t *gp)
1062{
1063 int lg, rg;
1064 unsigned short mask = (1 << gp->lfield->nbits) - 1;
1065
1066 ad1843_read_multi(lith, 2, gp->lfield, &lg, gp->rfield, &rg);
1067 if (gp->negative) {
1068 lg = mask - lg;
1069 rg = mask - rg;
1070 }
1071 lg = (lg * 100 + (mask >> 1)) / mask;
1072 rg = (rg * 100 + (mask >> 1)) / mask;
1073 return lg << 0 | rg << 8;
1074}
1075
1076/*
1077 * Set an audio channel's gain. Converts from OSS format to AD1843's
1078 * format.
1079 *
1080 * Returns the new gain, which may be lower than the old gain.
1081 */
1082
1083static int ad1843_set_gain(lithium_t *lith,
1084 const ad1843_gain_t *gp,
1085 int newval)
1086{
1087 unsigned short mask = (1 << gp->lfield->nbits) - 1;
1088
1089 int lg = newval >> 0 & 0xFF;
1090 int rg = newval >> 8;
1091 if (lg < 0 || lg > 100 || rg < 0 || rg > 100)
1092 return -EINVAL;
1093 lg = (lg * mask + (mask >> 1)) / 100;
1094 rg = (rg * mask + (mask >> 1)) / 100;
1095 if (gp->negative) {
1096 lg = mask - lg;
1097 rg = mask - rg;
1098 }
1099 ad1843_write_multi(lith, 2, gp->lfield, lg, gp->rfield, rg);
1100 return ad1843_get_gain(lith, gp);
1101}
1102
1103/* Returns the current recording source, in OSS format. */
1104
1105static int ad1843_get_recsrc(lithium_t *lith)
1106{
1107 int ls = ad1843_read_bits(lith, &ad1843_LSS);
1108
1109 switch (ls) {
1110 case 1:
1111 return SOUND_MASK_MIC;
1112 case 2:
1113 return SOUND_MASK_LINE;
1114 case 3:
1115 return SOUND_MASK_CD;
1116 case 6:
1117 return SOUND_MASK_PCM;
1118 default:
1119 ASSERT(0);
1120 return -1;
1121 }
1122}
1123
1124/*
1125 * Enable/disable digital resample mode in the AD1843.
1126 *
1127 * The AD1843 requires that ADL, ADR, DA1 and DA2 be powered down
1128 * while switching modes. So we save DA1's state (DA2's state is not
1129 * interesting), power them down, switch into/out of resample mode,
1130 * power them up, and restore state.
1131 *
1132 * This will cause audible glitches if D/A or A/D is going on, so the
1133 * driver disallows that (in mixer_write_ioctl()).
1134 *
1135 * The open question is, is this worth doing? I'm leaving it in,
1136 * because it's written, but...
1137 */
1138
1139static void ad1843_set_resample_mode(lithium_t *lith, int onoff)
1140{
1141 /* Save DA1 mute and gain (addr 9 is DA1 analog gain/attenuation) */
1142 int save_da1 = li_read_ad1843_reg(lith, 9);
1143
1144 /* Power down A/D and D/A. */
1145 ad1843_write_multi(lith, 4,
1146 &ad1843_DA1EN, 0,
1147 &ad1843_DA2EN, 0,
1148 &ad1843_ADLEN, 0,
1149 &ad1843_ADREN, 0);
1150
1151 /* Switch mode */
1152 ASSERT(onoff == 0 || onoff == 1);
1153 ad1843_write_bits(lith, &ad1843_DRSFLT, onoff);
1154
1155 /* Power up A/D and D/A. */
1156 ad1843_write_multi(lith, 3,
1157 &ad1843_DA1EN, 1,
1158 &ad1843_ADLEN, 1,
1159 &ad1843_ADREN, 1);
1160
1161 /* Restore DA1 mute and gain. */
1162 li_write_ad1843_reg(lith, 9, save_da1);
1163}
1164
1165/*
1166 * Set recording source. Arg newsrc specifies an OSS channel mask.
1167 *
1168 * The complication is that when we switch into/out of loopback mode
1169 * (i.e., src = SOUND_MASK_PCM), we change the AD1843 into/out of
1170 * digital resampling mode.
1171 *
1172 * Returns newsrc on success, -errno on failure.
1173 */
1174
1175static int ad1843_set_recsrc(lithium_t *lith, int newsrc)
1176{
1177 int bits;
1178 int oldbits;
1179
1180 switch (newsrc) {
1181 case SOUND_MASK_PCM:
1182 bits = 6;
1183 break;
1184
1185 case SOUND_MASK_MIC:
1186 bits = 1;
1187 break;
1188
1189 case SOUND_MASK_LINE:
1190 bits = 2;
1191 break;
1192
1193 case SOUND_MASK_CD:
1194 bits = 3;
1195 break;
1196
1197 default:
1198 return -EINVAL;
1199 }
1200 oldbits = ad1843_read_bits(lith, &ad1843_LSS);
1201 if (newsrc == SOUND_MASK_PCM && oldbits != 6) {
1202 DBGP("enabling digital resample mode\n");
1203 ad1843_set_resample_mode(lith, 1);
1204 ad1843_write_multi(lith, 2,
1205 &ad1843_DAADL, 2,
1206 &ad1843_DAADR, 2);
1207 } else if (newsrc != SOUND_MASK_PCM && oldbits == 6) {
1208 DBGP("disabling digital resample mode\n");
1209 ad1843_set_resample_mode(lith, 0);
1210 ad1843_write_multi(lith, 2,
1211 &ad1843_DAADL, 0,
1212 &ad1843_DAADR, 0);
1213 }
1214 ad1843_write_multi(lith, 2, &ad1843_LSS, bits, &ad1843_RSS, bits);
1215 return newsrc;
1216}
1217
1218/*
1219 * Return current output sources, in OSS format.
1220 */
1221
1222static int ad1843_get_outsrc(lithium_t *lith)
1223{
1224 int pcm, line, mic, cd;
1225
1226 pcm = ad1843_read_bits(lith, &ad1843_LDA1GM) ? 0 : SOUND_MASK_PCM;
1227 line = ad1843_read_bits(lith, &ad1843_LX1MM) ? 0 : SOUND_MASK_LINE;
1228 cd = ad1843_read_bits(lith, &ad1843_LX2MM) ? 0 : SOUND_MASK_CD;
1229 mic = ad1843_read_bits(lith, &ad1843_LMCMM) ? 0 : SOUND_MASK_MIC;
1230
1231 return pcm | line | cd | mic;
1232}
1233
1234/*
1235 * Set output sources. Arg is a mask of active sources in OSS format.
1236 *
1237 * Returns source mask on success, -errno on failure.
1238 */
1239
1240static int ad1843_set_outsrc(lithium_t *lith, int mask)
1241{
1242 int pcm, line, mic, cd;
1243
1244 if (mask & ~(SOUND_MASK_PCM | SOUND_MASK_LINE |
1245 SOUND_MASK_CD | SOUND_MASK_MIC))
1246 return -EINVAL;
1247 pcm = (mask & SOUND_MASK_PCM) ? 0 : 1;
1248 line = (mask & SOUND_MASK_LINE) ? 0 : 1;
1249 mic = (mask & SOUND_MASK_MIC) ? 0 : 1;
1250 cd = (mask & SOUND_MASK_CD) ? 0 : 1;
1251
1252 ad1843_write_multi(lith, 2, &ad1843_LDA1GM, pcm, &ad1843_RDA1GM, pcm);
1253 ad1843_write_multi(lith, 2, &ad1843_LX1MM, line, &ad1843_RX1MM, line);
1254 ad1843_write_multi(lith, 2, &ad1843_LX2MM, cd, &ad1843_RX2MM, cd);
1255 ad1843_write_multi(lith, 2, &ad1843_LMCMM, mic, &ad1843_RMCMM, mic);
1256
1257 return mask;
1258}
1259
1260/* Setup ad1843 for D/A conversion. */
1261
1262static void ad1843_setup_dac(lithium_t *lith,
1263 int framerate,
1264 int fmt,
1265 int channels)
1266{
1267 int ad_fmt = 0, ad_mode = 0;
1268
1269 DBGEV("(lith=0x%p, framerate=%d, fmt=%d, channels=%d)\n",
1270 lith, framerate, fmt, channels);
1271
1272 switch (fmt) {
1273 case AFMT_S8: ad_fmt = 1; break;
1274 case AFMT_U8: ad_fmt = 1; break;
1275 case AFMT_S16_LE: ad_fmt = 1; break;
1276 case AFMT_MU_LAW: ad_fmt = 2; break;
1277 case AFMT_A_LAW: ad_fmt = 3; break;
1278 default: ASSERT(0);
1279 }
1280
1281 switch (channels) {
1282 case 2: ad_mode = 0; break;
1283 case 1: ad_mode = 1; break;
1284 default: ASSERT(0);
1285 }
1286
1287 DBGPV("ad_mode = %d, ad_fmt = %d\n", ad_mode, ad_fmt);
1288 ASSERT(framerate >= 4000 && framerate <= 49000);
1289 ad1843_write_bits(lith, &ad1843_C1C, framerate);
1290 ad1843_write_multi(lith, 2,
1291 &ad1843_DA1SM, ad_mode, &ad1843_DA1F, ad_fmt);
1292}
1293
1294static void ad1843_shutdown_dac(lithium_t *lith)
1295{
1296 ad1843_write_bits(lith, &ad1843_DA1F, 1);
1297}
1298
1299static void ad1843_setup_adc(lithium_t *lith, int framerate, int fmt, int channels)
1300{
1301 int da_fmt = 0;
1302
1303 DBGEV("(lith=0x%p, framerate=%d, fmt=%d, channels=%d)\n",
1304 lith, framerate, fmt, channels);
1305
1306 switch (fmt) {
1307 case AFMT_S8: da_fmt = 1; break;
1308 case AFMT_U8: da_fmt = 1; break;
1309 case AFMT_S16_LE: da_fmt = 1; break;
1310 case AFMT_MU_LAW: da_fmt = 2; break;
1311 case AFMT_A_LAW: da_fmt = 3; break;
1312 default: ASSERT(0);
1313 }
1314
1315 DBGPV("da_fmt = %d\n", da_fmt);
1316 ASSERT(framerate >= 4000 && framerate <= 49000);
1317 ad1843_write_bits(lith, &ad1843_C2C, framerate);
1318 ad1843_write_multi(lith, 2,
1319 &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt);
1320}
1321
1322static void ad1843_shutdown_adc(lithium_t *lith)
1323{
1324 /* nothing to do */
1325}
1326
1327/*
1328 * Fully initialize the ad1843. As described in the AD1843 data
1329 * sheet, section "START-UP SEQUENCE". The numbered comments are
1330 * subsection headings from the data sheet. See the data sheet, pages
1331 * 52-54, for more info.
1332 *
1333 * return 0 on success, -errno on failure. */
1334
1335static int __init ad1843_init(lithium_t *lith)
1336{
1337 unsigned long later;
1338 int err;
1339
1340 err = li_init(lith);
1341 if (err)
1342 return err;
1343
1344 if (ad1843_read_bits(lith, &ad1843_INIT) != 0) {
1345 printk(KERN_ERR "vwsnd sound: AD1843 won't initialize\n");
1346 return -EIO;
1347 }
1348
1349 ad1843_write_bits(lith, &ad1843_SCF, 1);
1350
1351 /* 4. Put the conversion resources into standby. */
1352
1353 ad1843_write_bits(lith, &ad1843_PDNI, 0);
1354 later = jiffies + HZ / 2; /* roughly half a second */
1355 DBGDO(shut_up++);
1356 while (ad1843_read_bits(lith, &ad1843_PDNO)) {
1357 if (time_after(jiffies, later)) {
1358 printk(KERN_ERR
1359 "vwsnd audio: AD1843 won't power up\n");
1360 return -EIO;
1361 }
1362 schedule();
1363 }
1364 DBGDO(shut_up--);
1365
1366 /* 5. Power up the clock generators and enable clock output pins. */
1367
1368 ad1843_write_multi(lith, 2, &ad1843_C1EN, 1, &ad1843_C2EN, 1);
1369
1370 /* 6. Configure conversion resources while they are in standby. */
1371
1372 /* DAC1 uses clock 1 as source, ADC uses clock 2. Always. */
1373
1374 ad1843_write_multi(lith, 3,
1375 &ad1843_DA1C, 1,
1376 &ad1843_ADLC, 2,
1377 &ad1843_ADRC, 2);
1378
1379 /* 7. Enable conversion resources. */
1380
1381 ad1843_write_bits(lith, &ad1843_ADTLK, 1);
1382 ad1843_write_multi(lith, 5,
1383 &ad1843_ANAEN, 1,
1384 &ad1843_AAMEN, 1,
1385 &ad1843_DA1EN, 1,
1386 &ad1843_ADLEN, 1,
1387 &ad1843_ADREN, 1);
1388
1389 /* 8. Configure conversion resources while they are enabled. */
1390
1391 ad1843_write_bits(lith, &ad1843_DA1C, 1);
1392
1393 /* Unmute all channels. */
1394
1395 ad1843_set_outsrc(lith,
1396 (SOUND_MASK_PCM | SOUND_MASK_LINE |
1397 SOUND_MASK_MIC | SOUND_MASK_CD));
1398 ad1843_write_multi(lith, 2, &ad1843_LDA1AM, 0, &ad1843_RDA1AM, 0);
1399
1400 /* Set default recording source to Line In and set
1401 * mic gain to +20 dB.
1402 */
1403
1404 ad1843_set_recsrc(lith, SOUND_MASK_LINE);
1405 ad1843_write_multi(lith, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1);
1406
1407 /* Set Speaker Out level to +/- 4V and unmute it. */
1408
1409 ad1843_write_multi(lith, 2, &ad1843_HPOS, 1, &ad1843_HPOM, 0);
1410
1411 return 0;
1412}
1413
1414/*****************************************************************************/
1415/* PCM I/O */
1416
1417#define READ_INTR_MASK (LI_INTR_COMM1_TRIG | LI_INTR_COMM1_OVERFLOW)
1418#define WRITE_INTR_MASK (LI_INTR_COMM2_TRIG | LI_INTR_COMM2_UNDERFLOW)
1419
1420typedef enum vwsnd_port_swstate { /* software state */
1421 SW_OFF,
1422 SW_INITIAL,
1423 SW_RUN,
1424 SW_DRAIN,
1425} vwsnd_port_swstate_t;
1426
1427typedef enum vwsnd_port_hwstate { /* hardware state */
1428 HW_STOPPED,
1429 HW_RUNNING,
1430} vwsnd_port_hwstate_t;
1431
1432/*
1433 * These flags are read by ISR, but only written at baseline.
1434 */
1435
1436typedef enum vwsnd_port_flags {
1437 DISABLED = 1 << 0,
1438 ERFLOWN = 1 << 1, /* overflown or underflown */
1439 HW_BUSY = 1 << 2,
1440} vwsnd_port_flags_t;
1441
1442/*
1443 * vwsnd_port is the per-port data structure. Each device has two
1444 * ports, one for input and one for output.
1445 *
1446 * Locking:
1447 *
1448 * port->lock protects: hwstate, flags, swb_[iu]_avail.
1449 *
Ingo Molnar910f5d22006-03-23 03:00:39 -08001450 * devc->io_mutex protects: swstate, sw_*, swb_[iu]_idx.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001451 *
1452 * everything else is only written by open/release or
1453 * pcm_{setup,shutdown}(), which are serialized by a
Ingo Molnar910f5d22006-03-23 03:00:39 -08001454 * combination of devc->open_mutex and devc->io_mutex.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001455 */
1456
1457typedef struct vwsnd_port {
1458
1459 spinlock_t lock;
1460 wait_queue_head_t queue;
1461 vwsnd_port_swstate_t swstate;
1462 vwsnd_port_hwstate_t hwstate;
1463 vwsnd_port_flags_t flags;
1464
1465 int sw_channels;
1466 int sw_samplefmt;
1467 int sw_framerate;
1468 int sample_size;
1469 int frame_size;
1470 unsigned int zero_word; /* zero for the sample format */
1471
1472 int sw_fragshift;
1473 int sw_fragcount;
1474 int sw_subdivshift;
1475
1476 unsigned int hw_fragshift;
1477 unsigned int hw_fragsize;
1478 unsigned int hw_fragcount;
1479
1480 int hwbuf_size;
1481 unsigned long hwbuf_paddr;
1482 unsigned long hwbuf_vaddr;
1483 void * hwbuf; /* hwbuf == hwbuf_vaddr */
1484 int hwbuf_max; /* max bytes to preload */
1485
1486 void * swbuf;
1487 unsigned int swbuf_size; /* size in bytes */
1488 unsigned int swb_u_idx; /* index of next user byte */
1489 unsigned int swb_i_idx; /* index of next intr byte */
1490 unsigned int swb_u_avail; /* # bytes avail to user */
1491 unsigned int swb_i_avail; /* # bytes avail to intr */
1492
1493 dma_chan_t chan;
1494
1495 /* Accounting */
1496
1497 int byte_count;
1498 int frag_count;
1499 int MSC_offset;
1500
1501} vwsnd_port_t;
1502
1503/* vwsnd_dev is the per-device data structure. */
1504
1505typedef struct vwsnd_dev {
1506 struct vwsnd_dev *next_dev;
1507 int audio_minor; /* minor number of audio device */
1508 int mixer_minor; /* minor number of mixer device */
1509
Ingo Molnar910f5d22006-03-23 03:00:39 -08001510 struct mutex open_mutex;
1511 struct mutex io_mutex;
1512 struct mutex mix_mutex;
Al Viroaeb5d722008-09-02 15:28:45 -04001513 fmode_t open_mode;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001514 wait_queue_head_t open_wait;
1515
1516 lithium_t lith;
1517
1518 vwsnd_port_t rport;
1519 vwsnd_port_t wport;
1520} vwsnd_dev_t;
1521
1522static vwsnd_dev_t *vwsnd_dev_list; /* linked list of all devices */
1523
1524static atomic_t vwsnd_use_count = ATOMIC_INIT(0);
1525
1526# define INC_USE_COUNT (atomic_inc(&vwsnd_use_count))
1527# define DEC_USE_COUNT (atomic_dec(&vwsnd_use_count))
1528# define IN_USE (atomic_read(&vwsnd_use_count) != 0)
1529
1530/*
1531 * Lithium can only DMA multiples of 32 bytes. Its DMA buffer may
1532 * be up to 8 Kb. This driver always uses 8 Kb.
1533 *
1534 * Memory bug workaround -- I'm not sure what's going on here, but
1535 * somehow pcm_copy_out() was triggering segv's going on to the next
1536 * page of the hw buffer. So, I make the hw buffer one size bigger
1537 * than we actually use. That way, the following page is allocated
1538 * and mapped, and no error. I suspect that something is broken
1539 * in Cobalt, but haven't really investigated. HBO is the actual
1540 * size of the buffer, and HWBUF_ORDER is what we allocate.
1541 */
1542
1543#define HWBUF_SHIFT 13
1544#define HWBUF_SIZE (1 << HWBUF_SHIFT)
1545# define HBO (HWBUF_SHIFT > PAGE_SHIFT ? HWBUF_SHIFT - PAGE_SHIFT : 0)
1546# define HWBUF_ORDER (HBO + 1) /* next size bigger */
1547#define MIN_SPEED 4000
1548#define MAX_SPEED 49000
1549
1550#define MIN_FRAGSHIFT (DMACHUNK_SHIFT + 1)
1551#define MAX_FRAGSHIFT (PAGE_SHIFT)
1552#define MIN_FRAGSIZE (1 << MIN_FRAGSHIFT)
1553#define MAX_FRAGSIZE (1 << MAX_FRAGSHIFT)
1554#define MIN_FRAGCOUNT(fragsize) 3
1555#define MAX_FRAGCOUNT(fragsize) (32 * PAGE_SIZE / (fragsize))
1556#define DEFAULT_FRAGSHIFT 12
1557#define DEFAULT_FRAGCOUNT 16
1558#define DEFAULT_SUBDIVSHIFT 0
1559
1560/*
1561 * The software buffer (swbuf) is a ring buffer shared between user
1562 * level and interrupt level. Each level owns some of the bytes in
1563 * the buffer, and may give bytes away by calling swb_inc_{u,i}().
1564 * User level calls _u for user, and interrupt level calls _i for
1565 * interrupt.
1566 *
1567 * port->swb_{u,i}_avail is the number of bytes available to that level.
1568 *
1569 * port->swb_{u,i}_idx is the index of the first available byte in the
1570 * buffer.
1571 *
1572 * Each level calls swb_inc_{u,i}() to atomically increment its index,
1573 * recalculate the number of bytes available for both sides, and
1574 * return the number of bytes available. Since each side can only
1575 * give away bytes, the other side can only increase the number of
1576 * bytes available to this side. Each side updates its own index
1577 * variable, swb_{u,i}_idx, so no lock is needed to read it.
1578 *
1579 * To query the number of bytes available, call swb_inc_{u,i} with an
1580 * increment of zero.
1581 */
1582
1583static __inline__ unsigned int __swb_inc_u(vwsnd_port_t *port, int inc)
1584{
1585 if (inc) {
1586 port->swb_u_idx += inc;
1587 port->swb_u_idx %= port->swbuf_size;
1588 port->swb_u_avail -= inc;
1589 port->swb_i_avail += inc;
1590 }
1591 return port->swb_u_avail;
1592}
1593
1594static __inline__ unsigned int swb_inc_u(vwsnd_port_t *port, int inc)
1595{
1596 unsigned long flags;
1597 unsigned int ret;
1598
1599 spin_lock_irqsave(&port->lock, flags);
1600 {
1601 ret = __swb_inc_u(port, inc);
1602 }
1603 spin_unlock_irqrestore(&port->lock, flags);
1604 return ret;
1605}
1606
1607static __inline__ unsigned int __swb_inc_i(vwsnd_port_t *port, int inc)
1608{
1609 if (inc) {
1610 port->swb_i_idx += inc;
1611 port->swb_i_idx %= port->swbuf_size;
1612 port->swb_i_avail -= inc;
1613 port->swb_u_avail += inc;
1614 }
1615 return port->swb_i_avail;
1616}
1617
1618static __inline__ unsigned int swb_inc_i(vwsnd_port_t *port, int inc)
1619{
1620 unsigned long flags;
1621 unsigned int ret;
1622
1623 spin_lock_irqsave(&port->lock, flags);
1624 {
1625 ret = __swb_inc_i(port, inc);
1626 }
1627 spin_unlock_irqrestore(&port->lock, flags);
1628 return ret;
1629}
1630
1631/*
1632 * pcm_setup - this routine initializes all port state after
1633 * mode-setting ioctls have been done, but before the first I/O is
1634 * done.
1635 *
Ingo Molnar910f5d22006-03-23 03:00:39 -08001636 * Locking: called with devc->io_mutex held.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001637 *
1638 * Returns 0 on success, -errno on failure.
1639 */
1640
1641static int pcm_setup(vwsnd_dev_t *devc,
1642 vwsnd_port_t *rport,
1643 vwsnd_port_t *wport)
1644{
1645 vwsnd_port_t *aport = rport ? rport : wport;
1646 int sample_size;
1647 unsigned int zero_word;
1648
1649 DBGEV("(devc=0x%p, rport=0x%p, wport=0x%p)\n", devc, rport, wport);
1650
1651 ASSERT(aport != NULL);
1652 if (aport->swbuf != NULL)
1653 return 0;
1654 switch (aport->sw_samplefmt) {
1655 case AFMT_MU_LAW:
1656 sample_size = 1;
1657 zero_word = 0xFFFFFFFF ^ 0x80808080;
1658 break;
1659
1660 case AFMT_A_LAW:
1661 sample_size = 1;
1662 zero_word = 0xD5D5D5D5 ^ 0x80808080;
1663 break;
1664
1665 case AFMT_U8:
1666 sample_size = 1;
1667 zero_word = 0x80808080;
1668 break;
1669
1670 case AFMT_S8:
1671 sample_size = 1;
1672 zero_word = 0x00000000;
1673 break;
1674
1675 case AFMT_S16_LE:
1676 sample_size = 2;
1677 zero_word = 0x00000000;
1678 break;
1679
1680 default:
1681 sample_size = 0; /* prevent compiler warning */
1682 zero_word = 0;
1683 ASSERT(0);
1684 }
1685 aport->sample_size = sample_size;
1686 aport->zero_word = zero_word;
1687 aport->frame_size = aport->sw_channels * aport->sample_size;
1688 aport->hw_fragshift = aport->sw_fragshift - aport->sw_subdivshift;
1689 aport->hw_fragsize = 1 << aport->hw_fragshift;
1690 aport->hw_fragcount = aport->sw_fragcount << aport->sw_subdivshift;
1691 ASSERT(aport->hw_fragsize >= MIN_FRAGSIZE);
1692 ASSERT(aport->hw_fragsize <= MAX_FRAGSIZE);
1693 ASSERT(aport->hw_fragcount >= MIN_FRAGCOUNT(aport->hw_fragsize));
1694 ASSERT(aport->hw_fragcount <= MAX_FRAGCOUNT(aport->hw_fragsize));
1695 if (rport) {
1696 int hwfrags, swfrags;
1697 rport->hwbuf_max = aport->hwbuf_size - DMACHUNK_SIZE;
1698 hwfrags = rport->hwbuf_max >> aport->hw_fragshift;
1699 swfrags = aport->hw_fragcount - hwfrags;
1700 if (swfrags < 2)
1701 swfrags = 2;
1702 rport->swbuf_size = swfrags * aport->hw_fragsize;
1703 DBGPV("hwfrags = %d, swfrags = %d\n", hwfrags, swfrags);
1704 DBGPV("read hwbuf_max = %d, swbuf_size = %d\n",
1705 rport->hwbuf_max, rport->swbuf_size);
1706 }
1707 if (wport) {
1708 int hwfrags, swfrags;
1709 int total_bytes = aport->hw_fragcount * aport->hw_fragsize;
1710 wport->hwbuf_max = aport->hwbuf_size - DMACHUNK_SIZE;
1711 if (wport->hwbuf_max > total_bytes)
1712 wport->hwbuf_max = total_bytes;
1713 hwfrags = wport->hwbuf_max >> aport->hw_fragshift;
1714 DBGPV("hwfrags = %d\n", hwfrags);
1715 swfrags = aport->hw_fragcount - hwfrags;
1716 if (swfrags < 2)
1717 swfrags = 2;
1718 wport->swbuf_size = swfrags * aport->hw_fragsize;
1719 DBGPV("hwfrags = %d, swfrags = %d\n", hwfrags, swfrags);
1720 DBGPV("write hwbuf_max = %d, swbuf_size = %d\n",
1721 wport->hwbuf_max, wport->swbuf_size);
1722 }
1723
1724 aport->swb_u_idx = 0;
1725 aport->swb_i_idx = 0;
1726 aport->byte_count = 0;
1727
1728 /*
1729 * Is this a Cobalt bug? We need to make this buffer extend
1730 * one page further than we actually use -- somehow memcpy
1731 * causes an exceptoin otherwise. I suspect there's a bug in
1732 * Cobalt (or somewhere) where it's generating a fault on a
1733 * speculative load or something. Obviously, I haven't taken
1734 * the time to track it down.
1735 */
1736
1737 aport->swbuf = vmalloc(aport->swbuf_size + PAGE_SIZE);
1738 if (!aport->swbuf)
1739 return -ENOMEM;
1740 if (rport && wport) {
1741 ASSERT(aport == rport);
1742 ASSERT(wport->swbuf == NULL);
1743 /* One extra page - see comment above. */
1744 wport->swbuf = vmalloc(aport->swbuf_size + PAGE_SIZE);
1745 if (!wport->swbuf) {
1746 vfree(aport->swbuf);
1747 aport->swbuf = NULL;
1748 return -ENOMEM;
1749 }
1750 wport->sample_size = rport->sample_size;
1751 wport->zero_word = rport->zero_word;
1752 wport->frame_size = rport->frame_size;
1753 wport->hw_fragshift = rport->hw_fragshift;
1754 wport->hw_fragsize = rport->hw_fragsize;
1755 wport->hw_fragcount = rport->hw_fragcount;
1756 wport->swbuf_size = rport->swbuf_size;
1757 wport->hwbuf_max = rport->hwbuf_max;
1758 wport->swb_u_idx = rport->swb_u_idx;
1759 wport->swb_i_idx = rport->swb_i_idx;
1760 wport->byte_count = rport->byte_count;
1761 }
1762 if (rport) {
1763 rport->swb_u_avail = 0;
1764 rport->swb_i_avail = rport->swbuf_size;
1765 rport->swstate = SW_RUN;
1766 li_setup_dma(&rport->chan,
1767 &li_comm1,
1768 &devc->lith,
1769 rport->hwbuf_paddr,
1770 HWBUF_SHIFT,
1771 rport->hw_fragshift,
1772 rport->sw_channels,
1773 rport->sample_size);
1774 ad1843_setup_adc(&devc->lith,
1775 rport->sw_framerate,
1776 rport->sw_samplefmt,
1777 rport->sw_channels);
1778 li_enable_interrupts(&devc->lith, READ_INTR_MASK);
1779 if (!(rport->flags & DISABLED)) {
1780 ustmsc_t ustmsc;
1781 rport->hwstate = HW_RUNNING;
1782 li_activate_dma(&rport->chan);
1783 li_read_USTMSC(&rport->chan, &ustmsc);
1784 rport->MSC_offset = ustmsc.msc;
1785 }
1786 }
1787 if (wport) {
1788 if (wport->hwbuf_max > wport->swbuf_size)
1789 wport->hwbuf_max = wport->swbuf_size;
1790 wport->flags &= ~ERFLOWN;
1791 wport->swb_u_avail = wport->swbuf_size;
1792 wport->swb_i_avail = 0;
1793 wport->swstate = SW_RUN;
1794 li_setup_dma(&wport->chan,
1795 &li_comm2,
1796 &devc->lith,
1797 wport->hwbuf_paddr,
1798 HWBUF_SHIFT,
1799 wport->hw_fragshift,
1800 wport->sw_channels,
1801 wport->sample_size);
1802 ad1843_setup_dac(&devc->lith,
1803 wport->sw_framerate,
1804 wport->sw_samplefmt,
1805 wport->sw_channels);
1806 li_enable_interrupts(&devc->lith, WRITE_INTR_MASK);
1807 }
1808 DBGRV();
1809 return 0;
1810}
1811
1812/*
1813 * pcm_shutdown_port - shut down one port (direction) for PCM I/O.
1814 * Only called from pcm_shutdown.
1815 */
1816
1817static void pcm_shutdown_port(vwsnd_dev_t *devc,
1818 vwsnd_port_t *aport,
1819 unsigned int mask)
1820{
1821 unsigned long flags;
1822 vwsnd_port_hwstate_t hwstate;
1823 DECLARE_WAITQUEUE(wait, current);
1824
1825 aport->swstate = SW_INITIAL;
1826 add_wait_queue(&aport->queue, &wait);
1827 while (1) {
1828 set_current_state(TASK_UNINTERRUPTIBLE);
1829 spin_lock_irqsave(&aport->lock, flags);
1830 {
1831 hwstate = aport->hwstate;
1832 }
1833 spin_unlock_irqrestore(&aport->lock, flags);
1834 if (hwstate == HW_STOPPED)
1835 break;
1836 schedule();
1837 }
1838 current->state = TASK_RUNNING;
1839 remove_wait_queue(&aport->queue, &wait);
1840 li_disable_interrupts(&devc->lith, mask);
1841 if (aport == &devc->rport)
1842 ad1843_shutdown_adc(&devc->lith);
1843 else /* aport == &devc->wport) */
1844 ad1843_shutdown_dac(&devc->lith);
1845 li_shutdown_dma(&aport->chan);
1846 vfree(aport->swbuf);
1847 aport->swbuf = NULL;
1848 aport->byte_count = 0;
1849}
1850
1851/*
1852 * pcm_shutdown undoes what pcm_setup did.
1853 * Also sets the ports' swstate to newstate.
1854 */
1855
1856static void pcm_shutdown(vwsnd_dev_t *devc,
1857 vwsnd_port_t *rport,
1858 vwsnd_port_t *wport)
1859{
1860 DBGEV("(devc=0x%p, rport=0x%p, wport=0x%p)\n", devc, rport, wport);
1861
1862 if (rport && rport->swbuf) {
1863 DBGPV("shutting down rport\n");
1864 pcm_shutdown_port(devc, rport, READ_INTR_MASK);
1865 }
1866 if (wport && wport->swbuf) {
1867 DBGPV("shutting down wport\n");
1868 pcm_shutdown_port(devc, wport, WRITE_INTR_MASK);
1869 }
1870 DBGRV();
1871}
1872
1873static void pcm_copy_in(vwsnd_port_t *rport, int swidx, int hwidx, int nb)
1874{
1875 char *src = rport->hwbuf + hwidx;
1876 char *dst = rport->swbuf + swidx;
1877 int fmt = rport->sw_samplefmt;
1878
1879 DBGPV("swidx = %d, hwidx = %d\n", swidx, hwidx);
1880 ASSERT(rport->hwbuf != NULL);
1881 ASSERT(rport->swbuf != NULL);
1882 ASSERT(nb > 0 && (nb % 32) == 0);
1883 ASSERT(swidx % 32 == 0 && hwidx % 32 == 0);
1884 ASSERT(swidx >= 0 && swidx + nb <= rport->swbuf_size);
1885 ASSERT(hwidx >= 0 && hwidx + nb <= rport->hwbuf_size);
1886
1887 if (fmt == AFMT_MU_LAW || fmt == AFMT_A_LAW || fmt == AFMT_S8) {
1888
1889 /* See Sample Format Notes above. */
1890
1891 char *end = src + nb;
1892 while (src < end)
1893 *dst++ = *src++ ^ 0x80;
1894 } else
1895 memcpy(dst, src, nb);
1896}
1897
1898static void pcm_copy_out(vwsnd_port_t *wport, int swidx, int hwidx, int nb)
1899{
1900 char *src = wport->swbuf + swidx;
1901 char *dst = wport->hwbuf + hwidx;
1902 int fmt = wport->sw_samplefmt;
1903
1904 ASSERT(nb > 0 && (nb % 32) == 0);
1905 ASSERT(wport->hwbuf != NULL);
1906 ASSERT(wport->swbuf != NULL);
1907 ASSERT(swidx % 32 == 0 && hwidx % 32 == 0);
1908 ASSERT(swidx >= 0 && swidx + nb <= wport->swbuf_size);
1909 ASSERT(hwidx >= 0 && hwidx + nb <= wport->hwbuf_size);
1910 if (fmt == AFMT_MU_LAW || fmt == AFMT_A_LAW || fmt == AFMT_S8) {
1911
1912 /* See Sample Format Notes above. */
1913
1914 char *end = src + nb;
1915 while (src < end)
1916 *dst++ = *src++ ^ 0x80;
1917 } else
1918 memcpy(dst, src, nb);
1919}
1920
1921/*
1922 * pcm_output() is called both from baselevel and from interrupt level.
1923 * This is where audio frames are copied into the hardware-accessible
1924 * ring buffer.
1925 *
1926 * Locking note: The part of this routine that figures out what to do
1927 * holds wport->lock. The longer part releases wport->lock, but sets
1928 * wport->flags & HW_BUSY. Afterward, it reacquires wport->lock, and
1929 * checks for more work to do.
1930 *
1931 * If another thread calls pcm_output() while HW_BUSY is set, it
1932 * returns immediately, knowing that the thread that set HW_BUSY will
1933 * look for more work to do before returning.
1934 *
1935 * This has the advantage that port->lock is held for several short
1936 * periods instead of one long period. Also, when pcm_output is
1937 * called from base level, it reenables interrupts.
1938 */
1939
1940static void pcm_output(vwsnd_dev_t *devc, int erflown, int nb)
1941{
1942 vwsnd_port_t *wport = &devc->wport;
1943 const int hwmax = wport->hwbuf_max;
1944 const int hwsize = wport->hwbuf_size;
1945 const int swsize = wport->swbuf_size;
1946 const int fragsize = wport->hw_fragsize;
1947 unsigned long iflags;
1948
1949 DBGEV("(devc=0x%p, erflown=%d, nb=%d)\n", devc, erflown, nb);
1950 spin_lock_irqsave(&wport->lock, iflags);
1951 if (erflown)
1952 wport->flags |= ERFLOWN;
1953 (void) __swb_inc_u(wport, nb);
1954 if (wport->flags & HW_BUSY) {
1955 spin_unlock_irqrestore(&wport->lock, iflags);
1956 DBGPV("returning: HW BUSY\n");
1957 return;
1958 }
1959 if (wport->flags & DISABLED) {
1960 spin_unlock_irqrestore(&wport->lock, iflags);
1961 DBGPV("returning: DISABLED\n");
1962 return;
1963 }
1964 wport->flags |= HW_BUSY;
1965 while (1) {
1966 int swptr, hwptr, hw_avail, sw_avail, swidx;
1967 vwsnd_port_hwstate_t hwstate = wport->hwstate;
1968 vwsnd_port_swstate_t swstate = wport->swstate;
1969 int hw_unavail;
1970 ustmsc_t ustmsc;
1971
1972 hwptr = li_read_hwptr(&wport->chan);
1973 swptr = li_read_swptr(&wport->chan);
1974 hw_unavail = (swptr - hwptr + hwsize) % hwsize;
1975 hw_avail = (hwmax - hw_unavail) & -fragsize;
1976 sw_avail = wport->swb_i_avail & -fragsize;
1977 if (sw_avail && swstate == SW_RUN) {
1978 if (wport->flags & ERFLOWN) {
1979 wport->flags &= ~ERFLOWN;
1980 }
1981 } else if (swstate == SW_INITIAL ||
1982 swstate == SW_OFF ||
1983 (swstate == SW_DRAIN &&
1984 !sw_avail &&
1985 (wport->flags & ERFLOWN))) {
1986 DBGP("stopping. hwstate = %d\n", hwstate);
1987 if (hwstate != HW_STOPPED) {
1988 li_deactivate_dma(&wport->chan);
1989 wport->hwstate = HW_STOPPED;
1990 }
1991 wake_up(&wport->queue);
1992 break;
1993 }
1994 if (!sw_avail || !hw_avail)
1995 break;
1996 spin_unlock_irqrestore(&wport->lock, iflags);
1997
1998 /*
1999 * We gave up the port lock, but we have the HW_BUSY flag.
2000 * Proceed without accessing any nonlocal state.
2001 * Do not exit the loop -- must check for more work.
2002 */
2003
2004 swidx = wport->swb_i_idx;
2005 nb = hw_avail;
2006 if (nb > sw_avail)
2007 nb = sw_avail;
2008 if (nb > hwsize - swptr)
2009 nb = hwsize - swptr; /* don't overflow hwbuf */
2010 if (nb > swsize - swidx)
2011 nb = swsize - swidx; /* don't overflow swbuf */
2012 ASSERT(nb > 0);
2013 if (nb % fragsize) {
2014 DBGP("nb = %d, fragsize = %d\n", nb, fragsize);
2015 DBGP("hw_avail = %d\n", hw_avail);
2016 DBGP("sw_avail = %d\n", sw_avail);
2017 DBGP("hwsize = %d, swptr = %d\n", hwsize, swptr);
2018 DBGP("swsize = %d, swidx = %d\n", swsize, swidx);
2019 }
2020 ASSERT(!(nb % fragsize));
2021 DBGPV("copying swb[%d..%d] to hwb[%d..%d]\n",
2022 swidx, swidx + nb, swptr, swptr + nb);
2023 pcm_copy_out(wport, swidx, swptr, nb);
2024 li_write_swptr(&wport->chan, (swptr + nb) % hwsize);
2025 spin_lock_irqsave(&wport->lock, iflags);
2026 if (hwstate == HW_STOPPED) {
2027 DBGPV("starting\n");
2028 li_activate_dma(&wport->chan);
2029 wport->hwstate = HW_RUNNING;
2030 li_read_USTMSC(&wport->chan, &ustmsc);
2031 ASSERT(wport->byte_count % wport->frame_size == 0);
2032 wport->MSC_offset = ustmsc.msc - wport->byte_count / wport->frame_size;
2033 }
2034 __swb_inc_i(wport, nb);
2035 wport->byte_count += nb;
2036 wport->frag_count += nb / fragsize;
2037 ASSERT(nb % fragsize == 0);
2038 wake_up(&wport->queue);
2039 }
2040 wport->flags &= ~HW_BUSY;
2041 spin_unlock_irqrestore(&wport->lock, iflags);
2042 DBGRV();
2043}
2044
2045/*
2046 * pcm_input() is called both from baselevel and from interrupt level.
2047 * This is where audio frames are copied out of the hardware-accessible
2048 * ring buffer.
2049 *
2050 * Locking note: The part of this routine that figures out what to do
2051 * holds rport->lock. The longer part releases rport->lock, but sets
2052 * rport->flags & HW_BUSY. Afterward, it reacquires rport->lock, and
2053 * checks for more work to do.
2054 *
2055 * If another thread calls pcm_input() while HW_BUSY is set, it
2056 * returns immediately, knowing that the thread that set HW_BUSY will
2057 * look for more work to do before returning.
2058 *
2059 * This has the advantage that port->lock is held for several short
2060 * periods instead of one long period. Also, when pcm_input is
2061 * called from base level, it reenables interrupts.
2062 */
2063
2064static void pcm_input(vwsnd_dev_t *devc, int erflown, int nb)
2065{
2066 vwsnd_port_t *rport = &devc->rport;
2067 const int hwmax = rport->hwbuf_max;
2068 const int hwsize = rport->hwbuf_size;
2069 const int swsize = rport->swbuf_size;
2070 const int fragsize = rport->hw_fragsize;
2071 unsigned long iflags;
2072
2073 DBGEV("(devc=0x%p, erflown=%d, nb=%d)\n", devc, erflown, nb);
2074
2075 spin_lock_irqsave(&rport->lock, iflags);
2076 if (erflown)
2077 rport->flags |= ERFLOWN;
2078 (void) __swb_inc_u(rport, nb);
2079 if (rport->flags & HW_BUSY || !rport->swbuf) {
2080 spin_unlock_irqrestore(&rport->lock, iflags);
2081 DBGPV("returning: HW BUSY or !swbuf\n");
2082 return;
2083 }
2084 if (rport->flags & DISABLED) {
2085 spin_unlock_irqrestore(&rport->lock, iflags);
2086 DBGPV("returning: DISABLED\n");
2087 return;
2088 }
2089 rport->flags |= HW_BUSY;
2090 while (1) {
2091 int swptr, hwptr, hw_avail, sw_avail, swidx;
2092 vwsnd_port_hwstate_t hwstate = rport->hwstate;
2093 vwsnd_port_swstate_t swstate = rport->swstate;
2094
2095 hwptr = li_read_hwptr(&rport->chan);
2096 swptr = li_read_swptr(&rport->chan);
2097 hw_avail = (hwptr - swptr + hwsize) % hwsize & -fragsize;
2098 if (hw_avail > hwmax)
2099 hw_avail = hwmax;
2100 sw_avail = rport->swb_i_avail & -fragsize;
2101 if (swstate != SW_RUN) {
2102 DBGP("stopping. hwstate = %d\n", hwstate);
2103 if (hwstate != HW_STOPPED) {
2104 li_deactivate_dma(&rport->chan);
2105 rport->hwstate = HW_STOPPED;
2106 }
2107 wake_up(&rport->queue);
2108 break;
2109 }
2110 if (!sw_avail || !hw_avail)
2111 break;
2112 spin_unlock_irqrestore(&rport->lock, iflags);
2113
2114 /*
2115 * We gave up the port lock, but we have the HW_BUSY flag.
2116 * Proceed without accessing any nonlocal state.
2117 * Do not exit the loop -- must check for more work.
2118 */
2119
2120 swidx = rport->swb_i_idx;
2121 nb = hw_avail;
2122 if (nb > sw_avail)
2123 nb = sw_avail;
2124 if (nb > hwsize - swptr)
2125 nb = hwsize - swptr; /* don't overflow hwbuf */
2126 if (nb > swsize - swidx)
2127 nb = swsize - swidx; /* don't overflow swbuf */
2128 ASSERT(nb > 0);
2129 if (nb % fragsize) {
2130 DBGP("nb = %d, fragsize = %d\n", nb, fragsize);
2131 DBGP("hw_avail = %d\n", hw_avail);
2132 DBGP("sw_avail = %d\n", sw_avail);
2133 DBGP("hwsize = %d, swptr = %d\n", hwsize, swptr);
2134 DBGP("swsize = %d, swidx = %d\n", swsize, swidx);
2135 }
2136 ASSERT(!(nb % fragsize));
2137 DBGPV("copying hwb[%d..%d] to swb[%d..%d]\n",
2138 swptr, swptr + nb, swidx, swidx + nb);
2139 pcm_copy_in(rport, swidx, swptr, nb);
2140 li_write_swptr(&rport->chan, (swptr + nb) % hwsize);
2141 spin_lock_irqsave(&rport->lock, iflags);
2142 __swb_inc_i(rport, nb);
2143 rport->byte_count += nb;
2144 rport->frag_count += nb / fragsize;
2145 ASSERT(nb % fragsize == 0);
2146 wake_up(&rport->queue);
2147 }
2148 rport->flags &= ~HW_BUSY;
2149 spin_unlock_irqrestore(&rport->lock, iflags);
2150 DBGRV();
2151}
2152
2153/*
2154 * pcm_flush_frag() writes zero samples to fill the current fragment,
2155 * then flushes it to the hardware.
2156 *
2157 * It is only meaningful to flush output, not input.
2158 */
2159
2160static void pcm_flush_frag(vwsnd_dev_t *devc)
2161{
2162 vwsnd_port_t *wport = &devc->wport;
2163
2164 DBGPV("swstate = %d\n", wport->swstate);
2165 if (wport->swstate == SW_RUN) {
2166 int idx = wport->swb_u_idx;
2167 int end = (idx + wport->hw_fragsize - 1)
2168 >> wport->hw_fragshift
2169 << wport->hw_fragshift;
2170 int nb = end - idx;
2171 DBGPV("clearing %d bytes\n", nb);
2172 if (nb)
2173 memset(wport->swbuf + idx,
2174 (char) wport->zero_word,
2175 nb);
2176 wport->swstate = SW_DRAIN;
2177 pcm_output(devc, 0, nb);
2178 }
2179 DBGRV();
2180}
2181
2182/*
2183 * Wait for output to drain. This sleeps uninterruptibly because
2184 * there is nothing intelligent we can do if interrupted. This
2185 * means the process will be delayed in responding to the signal.
2186 */
2187
2188static void pcm_write_sync(vwsnd_dev_t *devc)
2189{
2190 vwsnd_port_t *wport = &devc->wport;
2191 DECLARE_WAITQUEUE(wait, current);
2192 unsigned long flags;
2193 vwsnd_port_hwstate_t hwstate;
2194
2195 DBGEV("(devc=0x%p)\n", devc);
2196 add_wait_queue(&wport->queue, &wait);
2197 while (1) {
2198 set_current_state(TASK_UNINTERRUPTIBLE);
2199 spin_lock_irqsave(&wport->lock, flags);
2200 {
2201 hwstate = wport->hwstate;
2202 }
2203 spin_unlock_irqrestore(&wport->lock, flags);
2204 if (hwstate == HW_STOPPED)
2205 break;
2206 schedule();
2207 }
2208 current->state = TASK_RUNNING;
2209 remove_wait_queue(&wport->queue, &wait);
2210 DBGPV("swstate = %d, hwstate = %d\n", wport->swstate, wport->hwstate);
2211 DBGRV();
2212}
2213
2214/*****************************************************************************/
2215/* audio driver */
2216
2217/*
2218 * seek on an audio device always fails.
2219 */
2220
2221static void vwsnd_audio_read_intr(vwsnd_dev_t *devc, unsigned int status)
2222{
2223 int overflown = status & LI_INTR_COMM1_OVERFLOW;
2224
2225 if (status & READ_INTR_MASK)
2226 pcm_input(devc, overflown, 0);
2227}
2228
2229static void vwsnd_audio_write_intr(vwsnd_dev_t *devc, unsigned int status)
2230{
2231 int underflown = status & LI_INTR_COMM2_UNDERFLOW;
2232
2233 if (status & WRITE_INTR_MASK)
2234 pcm_output(devc, underflown, 0);
2235}
2236
David Howells7d12e782006-10-05 14:55:46 +01002237static irqreturn_t vwsnd_audio_intr(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002238{
Jeff Garzikc7bec5a2006-10-06 15:00:58 -04002239 vwsnd_dev_t *devc = dev_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002240 unsigned int status;
2241
David Howells7d12e782006-10-05 14:55:46 +01002242 DBGEV("(irq=%d, dev_id=0x%p)\n", irq, dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002243
2244 status = li_get_clear_intr_status(&devc->lith);
2245 vwsnd_audio_read_intr(devc, status);
2246 vwsnd_audio_write_intr(devc, status);
2247 return IRQ_HANDLED;
2248}
2249
2250static ssize_t vwsnd_audio_do_read(struct file *file,
2251 char *buffer,
2252 size_t count,
2253 loff_t *ppos)
2254{
2255 vwsnd_dev_t *devc = file->private_data;
2256 vwsnd_port_t *rport = ((file->f_mode & FMODE_READ) ?
2257 &devc->rport : NULL);
2258 int ret, nb;
2259
2260 DBGEV("(file=0x%p, buffer=0x%p, count=%d, ppos=0x%p)\n",
2261 file, buffer, count, ppos);
2262
2263 if (!rport)
2264 return -EINVAL;
2265
2266 if (rport->swbuf == NULL) {
2267 vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ?
2268 &devc->wport : NULL;
2269 ret = pcm_setup(devc, rport, wport);
2270 if (ret < 0)
2271 return ret;
2272 }
2273
2274 if (!access_ok(VERIFY_READ, buffer, count))
2275 return -EFAULT;
2276 ret = 0;
2277 while (count) {
2278 DECLARE_WAITQUEUE(wait, current);
2279 add_wait_queue(&rport->queue, &wait);
2280 while ((nb = swb_inc_u(rport, 0)) == 0) {
2281 DBGPV("blocking\n");
2282 set_current_state(TASK_INTERRUPTIBLE);
2283 if (rport->flags & DISABLED ||
2284 file->f_flags & O_NONBLOCK) {
2285 current->state = TASK_RUNNING;
2286 remove_wait_queue(&rport->queue, &wait);
2287 return ret ? ret : -EAGAIN;
2288 }
2289 schedule();
2290 if (signal_pending(current)) {
2291 current->state = TASK_RUNNING;
2292 remove_wait_queue(&rport->queue, &wait);
2293 return ret ? ret : -ERESTARTSYS;
2294 }
2295 }
2296 current->state = TASK_RUNNING;
2297 remove_wait_queue(&rport->queue, &wait);
2298 pcm_input(devc, 0, 0);
2299 /* nb bytes are available in userbuf. */
2300 if (nb > count)
2301 nb = count;
2302 DBGPV("nb = %d\n", nb);
2303 if (copy_to_user(buffer, rport->swbuf + rport->swb_u_idx, nb))
2304 return -EFAULT;
2305 (void) swb_inc_u(rport, nb);
2306 buffer += nb;
2307 count -= nb;
2308 ret += nb;
2309 }
2310 DBGPV("returning %d\n", ret);
2311 return ret;
2312}
2313
2314static ssize_t vwsnd_audio_read(struct file *file,
2315 char *buffer,
2316 size_t count,
2317 loff_t *ppos)
2318{
2319 vwsnd_dev_t *devc = file->private_data;
2320 ssize_t ret;
2321
Ingo Molnar910f5d22006-03-23 03:00:39 -08002322 mutex_lock(&devc->io_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002323 ret = vwsnd_audio_do_read(file, buffer, count, ppos);
Ingo Molnar910f5d22006-03-23 03:00:39 -08002324 mutex_unlock(&devc->io_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002325 return ret;
2326}
2327
2328static ssize_t vwsnd_audio_do_write(struct file *file,
2329 const char *buffer,
2330 size_t count,
2331 loff_t *ppos)
2332{
2333 vwsnd_dev_t *devc = file->private_data;
2334 vwsnd_port_t *wport = ((file->f_mode & FMODE_WRITE) ?
2335 &devc->wport : NULL);
2336 int ret, nb;
2337
2338 DBGEV("(file=0x%p, buffer=0x%p, count=%d, ppos=0x%p)\n",
2339 file, buffer, count, ppos);
2340
2341 if (!wport)
2342 return -EINVAL;
2343
2344 if (wport->swbuf == NULL) {
2345 vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ?
2346 &devc->rport : NULL;
2347 ret = pcm_setup(devc, rport, wport);
2348 if (ret < 0)
2349 return ret;
2350 }
2351 if (!access_ok(VERIFY_WRITE, buffer, count))
2352 return -EFAULT;
2353 ret = 0;
2354 while (count) {
2355 DECLARE_WAITQUEUE(wait, current);
2356 add_wait_queue(&wport->queue, &wait);
2357 while ((nb = swb_inc_u(wport, 0)) == 0) {
2358 set_current_state(TASK_INTERRUPTIBLE);
2359 if (wport->flags & DISABLED ||
2360 file->f_flags & O_NONBLOCK) {
2361 current->state = TASK_RUNNING;
2362 remove_wait_queue(&wport->queue, &wait);
2363 return ret ? ret : -EAGAIN;
2364 }
2365 schedule();
2366 if (signal_pending(current)) {
2367 current->state = TASK_RUNNING;
2368 remove_wait_queue(&wport->queue, &wait);
2369 return ret ? ret : -ERESTARTSYS;
2370 }
2371 }
2372 current->state = TASK_RUNNING;
2373 remove_wait_queue(&wport->queue, &wait);
2374 /* nb bytes are available in userbuf. */
2375 if (nb > count)
2376 nb = count;
2377 DBGPV("nb = %d\n", nb);
2378 if (copy_from_user(wport->swbuf + wport->swb_u_idx, buffer, nb))
2379 return -EFAULT;
2380 pcm_output(devc, 0, nb);
2381 buffer += nb;
2382 count -= nb;
2383 ret += nb;
2384 }
2385 DBGPV("returning %d\n", ret);
2386 return ret;
2387}
2388
2389static ssize_t vwsnd_audio_write(struct file *file,
2390 const char *buffer,
2391 size_t count,
2392 loff_t *ppos)
2393{
2394 vwsnd_dev_t *devc = file->private_data;
2395 ssize_t ret;
2396
Ingo Molnar910f5d22006-03-23 03:00:39 -08002397 mutex_lock(&devc->io_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002398 ret = vwsnd_audio_do_write(file, buffer, count, ppos);
Ingo Molnar910f5d22006-03-23 03:00:39 -08002399 mutex_unlock(&devc->io_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002400 return ret;
2401}
2402
2403/* No kernel lock - fine */
2404static unsigned int vwsnd_audio_poll(struct file *file,
2405 struct poll_table_struct *wait)
2406{
2407 vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
2408 vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ?
2409 &devc->rport : NULL;
2410 vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ?
2411 &devc->wport : NULL;
2412 unsigned int mask = 0;
2413
2414 DBGEV("(file=0x%p, wait=0x%p)\n", file, wait);
2415
2416 ASSERT(rport || wport);
2417 if (rport) {
2418 poll_wait(file, &rport->queue, wait);
2419 if (swb_inc_u(rport, 0))
2420 mask |= (POLLIN | POLLRDNORM);
2421 }
2422 if (wport) {
2423 poll_wait(file, &wport->queue, wait);
2424 if (wport->swbuf == NULL || swb_inc_u(wport, 0))
2425 mask |= (POLLOUT | POLLWRNORM);
2426 }
2427
2428 DBGPV("returning 0x%x\n", mask);
2429 return mask;
2430}
2431
Arnd Bergmannd2099742010-07-12 19:53:18 +02002432static int vwsnd_audio_do_ioctl(struct file *file,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002433 unsigned int cmd,
2434 unsigned long arg)
2435{
2436 vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
2437 vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ?
2438 &devc->rport : NULL;
2439 vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ?
2440 &devc->wport : NULL;
2441 vwsnd_port_t *aport = rport ? rport : wport;
2442 struct audio_buf_info buf_info;
2443 struct count_info info;
2444 unsigned long flags;
2445 int ival;
2446
2447
Arnd Bergmannd2099742010-07-12 19:53:18 +02002448 DBGEV("(file=0x%p, cmd=0x%x, arg=0x%lx)\n",
2449 file, cmd, arg);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002450 switch (cmd) {
2451 case OSS_GETVERSION: /* _SIOR ('M', 118, int) */
2452 DBGX("OSS_GETVERSION\n");
2453 ival = SOUND_VERSION;
2454 return put_user(ival, (int *) arg);
2455
2456 case SNDCTL_DSP_GETCAPS: /* _SIOR ('P',15, int) */
2457 DBGX("SNDCTL_DSP_GETCAPS\n");
2458 ival = DSP_CAP_DUPLEX | DSP_CAP_REALTIME | DSP_CAP_TRIGGER;
2459 return put_user(ival, (int *) arg);
2460
2461 case SNDCTL_DSP_GETFMTS: /* _SIOR ('P',11, int) */
2462 DBGX("SNDCTL_DSP_GETFMTS\n");
2463 ival = (AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW |
2464 AFMT_U8 | AFMT_S8);
2465 return put_user(ival, (int *) arg);
2466 break;
2467
2468 case SOUND_PCM_READ_RATE: /* _SIOR ('P', 2, int) */
2469 DBGX("SOUND_PCM_READ_RATE\n");
2470 ival = aport->sw_framerate;
2471 return put_user(ival, (int *) arg);
2472
2473 case SOUND_PCM_READ_CHANNELS: /* _SIOR ('P', 6, int) */
2474 DBGX("SOUND_PCM_READ_CHANNELS\n");
2475 ival = aport->sw_channels;
2476 return put_user(ival, (int *) arg);
2477
2478 case SNDCTL_DSP_SPEED: /* _SIOWR('P', 2, int) */
2479 if (get_user(ival, (int *) arg))
2480 return -EFAULT;
2481 DBGX("SNDCTL_DSP_SPEED %d\n", ival);
2482 if (ival) {
2483 if (aport->swstate != SW_INITIAL) {
2484 DBGX("SNDCTL_DSP_SPEED failed: swstate = %d\n",
2485 aport->swstate);
2486 return -EINVAL;
2487 }
2488 if (ival < MIN_SPEED)
2489 ival = MIN_SPEED;
2490 if (ival > MAX_SPEED)
2491 ival = MAX_SPEED;
2492 if (rport)
2493 rport->sw_framerate = ival;
2494 if (wport)
2495 wport->sw_framerate = ival;
2496 } else
2497 ival = aport->sw_framerate;
2498 return put_user(ival, (int *) arg);
2499
2500 case SNDCTL_DSP_STEREO: /* _SIOWR('P', 3, int) */
2501 if (get_user(ival, (int *) arg))
2502 return -EFAULT;
2503 DBGX("SNDCTL_DSP_STEREO %d\n", ival);
2504 if (ival != 0 && ival != 1)
2505 return -EINVAL;
2506 if (aport->swstate != SW_INITIAL)
2507 return -EINVAL;
2508 if (rport)
2509 rport->sw_channels = ival + 1;
2510 if (wport)
2511 wport->sw_channels = ival + 1;
2512 return put_user(ival, (int *) arg);
2513
2514 case SNDCTL_DSP_CHANNELS: /* _SIOWR('P', 6, int) */
2515 if (get_user(ival, (int *) arg))
2516 return -EFAULT;
2517 DBGX("SNDCTL_DSP_CHANNELS %d\n", ival);
2518 if (ival != 1 && ival != 2)
2519 return -EINVAL;
2520 if (aport->swstate != SW_INITIAL)
2521 return -EINVAL;
2522 if (rport)
2523 rport->sw_channels = ival;
2524 if (wport)
2525 wport->sw_channels = ival;
2526 return put_user(ival, (int *) arg);
2527
2528 case SNDCTL_DSP_GETBLKSIZE: /* _SIOWR('P', 4, int) */
2529 ival = pcm_setup(devc, rport, wport);
2530 if (ival < 0) {
2531 DBGX("SNDCTL_DSP_GETBLKSIZE failed, errno %d\n", ival);
2532 return ival;
2533 }
2534 ival = 1 << aport->sw_fragshift;
2535 DBGX("SNDCTL_DSP_GETBLKSIZE returning %d\n", ival);
2536 return put_user(ival, (int *) arg);
2537
2538 case SNDCTL_DSP_SETFRAGMENT: /* _SIOWR('P',10, int) */
2539 if (get_user(ival, (int *) arg))
2540 return -EFAULT;
2541 DBGX("SNDCTL_DSP_SETFRAGMENT %d:%d\n",
2542 ival >> 16, ival & 0xFFFF);
2543 if (aport->swstate != SW_INITIAL)
2544 return -EINVAL;
2545 {
2546 int sw_fragshift = ival & 0xFFFF;
2547 int sw_subdivshift = aport->sw_subdivshift;
2548 int hw_fragshift = sw_fragshift - sw_subdivshift;
2549 int sw_fragcount = (ival >> 16) & 0xFFFF;
2550 int hw_fragsize;
2551 if (hw_fragshift < MIN_FRAGSHIFT)
2552 hw_fragshift = MIN_FRAGSHIFT;
2553 if (hw_fragshift > MAX_FRAGSHIFT)
2554 hw_fragshift = MAX_FRAGSHIFT;
2555 sw_fragshift = hw_fragshift + aport->sw_subdivshift;
2556 hw_fragsize = 1 << hw_fragshift;
2557 if (sw_fragcount < MIN_FRAGCOUNT(hw_fragsize))
2558 sw_fragcount = MIN_FRAGCOUNT(hw_fragsize);
2559 if (sw_fragcount > MAX_FRAGCOUNT(hw_fragsize))
2560 sw_fragcount = MAX_FRAGCOUNT(hw_fragsize);
2561 DBGPV("sw_fragshift = %d\n", sw_fragshift);
2562 DBGPV("rport = 0x%p, wport = 0x%p\n", rport, wport);
2563 if (rport) {
2564 rport->sw_fragshift = sw_fragshift;
2565 rport->sw_fragcount = sw_fragcount;
2566 }
2567 if (wport) {
2568 wport->sw_fragshift = sw_fragshift;
2569 wport->sw_fragcount = sw_fragcount;
2570 }
2571 ival = sw_fragcount << 16 | sw_fragshift;
2572 }
2573 DBGX("SNDCTL_DSP_SETFRAGMENT returns %d:%d\n",
2574 ival >> 16, ival & 0xFFFF);
2575 return put_user(ival, (int *) arg);
2576
2577 case SNDCTL_DSP_SUBDIVIDE: /* _SIOWR('P', 9, int) */
2578 if (get_user(ival, (int *) arg))
2579 return -EFAULT;
2580 DBGX("SNDCTL_DSP_SUBDIVIDE %d\n", ival);
2581 if (aport->swstate != SW_INITIAL)
2582 return -EINVAL;
2583 {
2584 int subdivshift;
2585 int hw_fragshift, hw_fragsize, hw_fragcount;
2586 switch (ival) {
2587 case 1: subdivshift = 0; break;
2588 case 2: subdivshift = 1; break;
2589 case 4: subdivshift = 2; break;
2590 default: return -EINVAL;
2591 }
2592 hw_fragshift = aport->sw_fragshift - subdivshift;
2593 if (hw_fragshift < MIN_FRAGSHIFT ||
2594 hw_fragshift > MAX_FRAGSHIFT)
2595 return -EINVAL;
2596 hw_fragsize = 1 << hw_fragshift;
2597 hw_fragcount = aport->sw_fragcount >> subdivshift;
2598 if (hw_fragcount < MIN_FRAGCOUNT(hw_fragsize) ||
2599 hw_fragcount > MAX_FRAGCOUNT(hw_fragsize))
2600 return -EINVAL;
2601 if (rport)
2602 rport->sw_subdivshift = subdivshift;
2603 if (wport)
2604 wport->sw_subdivshift = subdivshift;
2605 }
2606 return 0;
2607
2608 case SNDCTL_DSP_SETFMT: /* _SIOWR('P',5, int) */
2609 if (get_user(ival, (int *) arg))
2610 return -EFAULT;
2611 DBGX("SNDCTL_DSP_SETFMT %d\n", ival);
2612 if (ival != AFMT_QUERY) {
2613 if (aport->swstate != SW_INITIAL) {
2614 DBGP("SETFMT failed, swstate = %d\n",
2615 aport->swstate);
2616 return -EINVAL;
2617 }
2618 switch (ival) {
2619 case AFMT_MU_LAW:
2620 case AFMT_A_LAW:
2621 case AFMT_U8:
2622 case AFMT_S8:
2623 case AFMT_S16_LE:
2624 if (rport)
2625 rport->sw_samplefmt = ival;
2626 if (wport)
2627 wport->sw_samplefmt = ival;
2628 break;
2629 default:
2630 return -EINVAL;
2631 }
2632 }
2633 ival = aport->sw_samplefmt;
2634 return put_user(ival, (int *) arg);
2635
2636 case SNDCTL_DSP_GETOSPACE: /* _SIOR ('P',12, audio_buf_info) */
2637 DBGXV("SNDCTL_DSP_GETOSPACE\n");
2638 if (!wport)
2639 return -EINVAL;
2640 ival = pcm_setup(devc, rport, wport);
2641 if (ival < 0)
2642 return ival;
2643 ival = swb_inc_u(wport, 0);
2644 buf_info.fragments = ival >> wport->sw_fragshift;
2645 buf_info.fragstotal = wport->sw_fragcount;
2646 buf_info.fragsize = 1 << wport->sw_fragshift;
2647 buf_info.bytes = ival;
2648 DBGXV("SNDCTL_DSP_GETOSPACE returns { %d %d %d %d }\n",
2649 buf_info.fragments, buf_info.fragstotal,
2650 buf_info.fragsize, buf_info.bytes);
2651 if (copy_to_user((void *) arg, &buf_info, sizeof buf_info))
2652 return -EFAULT;
2653 return 0;
2654
2655 case SNDCTL_DSP_GETISPACE: /* _SIOR ('P',13, audio_buf_info) */
2656 DBGX("SNDCTL_DSP_GETISPACE\n");
2657 if (!rport)
2658 return -EINVAL;
2659 ival = pcm_setup(devc, rport, wport);
2660 if (ival < 0)
2661 return ival;
2662 ival = swb_inc_u(rport, 0);
2663 buf_info.fragments = ival >> rport->sw_fragshift;
2664 buf_info.fragstotal = rport->sw_fragcount;
2665 buf_info.fragsize = 1 << rport->sw_fragshift;
2666 buf_info.bytes = ival;
2667 DBGX("SNDCTL_DSP_GETISPACE returns { %d %d %d %d }\n",
2668 buf_info.fragments, buf_info.fragstotal,
2669 buf_info.fragsize, buf_info.bytes);
2670 if (copy_to_user((void *) arg, &buf_info, sizeof buf_info))
2671 return -EFAULT;
2672 return 0;
2673
2674 case SNDCTL_DSP_NONBLOCK: /* _SIO ('P',14) */
2675 DBGX("SNDCTL_DSP_NONBLOCK\n");
Jonathan Corbetdb1dd4d2009-02-06 15:25:24 -07002676 spin_lock(&file->f_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002677 file->f_flags |= O_NONBLOCK;
Jonathan Corbetdb1dd4d2009-02-06 15:25:24 -07002678 spin_unlock(&file->f_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002679 return 0;
2680
2681 case SNDCTL_DSP_RESET: /* _SIO ('P', 0) */
2682 DBGX("SNDCTL_DSP_RESET\n");
2683 /*
2684 * Nothing special needs to be done for input. Input
2685 * samples sit in swbuf, but it will be reinitialized
2686 * to empty when pcm_setup() is called.
2687 */
2688 if (wport && wport->swbuf) {
2689 wport->swstate = SW_INITIAL;
2690 pcm_output(devc, 0, 0);
2691 pcm_write_sync(devc);
2692 }
2693 pcm_shutdown(devc, rport, wport);
2694 return 0;
2695
2696 case SNDCTL_DSP_SYNC: /* _SIO ('P', 1) */
2697 DBGX("SNDCTL_DSP_SYNC\n");
2698 if (wport) {
2699 pcm_flush_frag(devc);
2700 pcm_write_sync(devc);
2701 }
2702 pcm_shutdown(devc, rport, wport);
2703 return 0;
2704
2705 case SNDCTL_DSP_POST: /* _SIO ('P', 8) */
2706 DBGX("SNDCTL_DSP_POST\n");
2707 if (!wport)
2708 return -EINVAL;
2709 pcm_flush_frag(devc);
2710 return 0;
2711
2712 case SNDCTL_DSP_GETIPTR: /* _SIOR ('P', 17, count_info) */
2713 DBGX("SNDCTL_DSP_GETIPTR\n");
2714 if (!rport)
2715 return -EINVAL;
2716 spin_lock_irqsave(&rport->lock, flags);
2717 {
2718 ustmsc_t ustmsc;
2719 if (rport->hwstate == HW_RUNNING) {
2720 ASSERT(rport->swstate == SW_RUN);
2721 li_read_USTMSC(&rport->chan, &ustmsc);
2722 info.bytes = ustmsc.msc - rport->MSC_offset;
2723 info.bytes *= rport->frame_size;
2724 } else {
2725 info.bytes = rport->byte_count;
2726 }
2727 info.blocks = rport->frag_count;
2728 info.ptr = 0; /* not implemented */
2729 rport->frag_count = 0;
2730 }
2731 spin_unlock_irqrestore(&rport->lock, flags);
2732 if (copy_to_user((void *) arg, &info, sizeof info))
2733 return -EFAULT;
2734 return 0;
2735
2736 case SNDCTL_DSP_GETOPTR: /* _SIOR ('P',18, count_info) */
2737 DBGX("SNDCTL_DSP_GETOPTR\n");
2738 if (!wport)
2739 return -EINVAL;
2740 spin_lock_irqsave(&wport->lock, flags);
2741 {
2742 ustmsc_t ustmsc;
2743 if (wport->hwstate == HW_RUNNING) {
2744 ASSERT(wport->swstate == SW_RUN);
2745 li_read_USTMSC(&wport->chan, &ustmsc);
2746 info.bytes = ustmsc.msc - wport->MSC_offset;
2747 info.bytes *= wport->frame_size;
2748 } else {
2749 info.bytes = wport->byte_count;
2750 }
2751 info.blocks = wport->frag_count;
2752 info.ptr = 0; /* not implemented */
2753 wport->frag_count = 0;
2754 }
2755 spin_unlock_irqrestore(&wport->lock, flags);
2756 if (copy_to_user((void *) arg, &info, sizeof info))
2757 return -EFAULT;
2758 return 0;
2759
2760 case SNDCTL_DSP_GETODELAY: /* _SIOR ('P', 23, int) */
2761 DBGX("SNDCTL_DSP_GETODELAY\n");
2762 if (!wport)
2763 return -EINVAL;
2764 spin_lock_irqsave(&wport->lock, flags);
2765 {
2766 int fsize = wport->frame_size;
2767 ival = wport->swb_i_avail / fsize;
2768 if (wport->hwstate == HW_RUNNING) {
2769 int swptr, hwptr, hwframes, hwbytes, hwsize;
2770 int totalhwbytes;
2771 ustmsc_t ustmsc;
2772
2773 hwsize = wport->hwbuf_size;
2774 swptr = li_read_swptr(&wport->chan);
2775 li_read_USTMSC(&wport->chan, &ustmsc);
2776 hwframes = ustmsc.msc - wport->MSC_offset;
2777 totalhwbytes = hwframes * fsize;
2778 hwptr = totalhwbytes % hwsize;
2779 hwbytes = (swptr - hwptr + hwsize) % hwsize;
2780 ival += hwbytes / fsize;
2781 }
2782 }
2783 spin_unlock_irqrestore(&wport->lock, flags);
2784 return put_user(ival, (int *) arg);
2785
2786 case SNDCTL_DSP_PROFILE: /* _SIOW ('P', 23, int) */
2787 DBGX("SNDCTL_DSP_PROFILE\n");
2788
2789 /*
2790 * Thomas Sailer explains SNDCTL_DSP_PROFILE
2791 * (private email, March 24, 1999):
2792 *
2793 * This gives the sound driver a hint on what it
2794 * should do with partial fragments
2795 * (i.e. fragments partially filled with write).
2796 * This can direct the driver to zero them or
2797 * leave them alone. But don't ask me what this
2798 * is good for, my driver just zeroes the last
2799 * fragment before the receiver stops, no idea
2800 * what good for any other behaviour could
2801 * be. Implementing it as NOP seems safe.
2802 */
2803
2804 break;
2805
2806 case SNDCTL_DSP_GETTRIGGER: /* _SIOR ('P',16, int) */
2807 DBGX("SNDCTL_DSP_GETTRIGGER\n");
2808 ival = 0;
2809 if (rport) {
2810 spin_lock_irqsave(&rport->lock, flags);
2811 {
2812 if (!(rport->flags & DISABLED))
2813 ival |= PCM_ENABLE_INPUT;
2814 }
2815 spin_unlock_irqrestore(&rport->lock, flags);
2816 }
2817 if (wport) {
2818 spin_lock_irqsave(&wport->lock, flags);
2819 {
2820 if (!(wport->flags & DISABLED))
2821 ival |= PCM_ENABLE_OUTPUT;
2822 }
2823 spin_unlock_irqrestore(&wport->lock, flags);
2824 }
2825 return put_user(ival, (int *) arg);
2826
2827 case SNDCTL_DSP_SETTRIGGER: /* _SIOW ('P',16, int) */
2828 if (get_user(ival, (int *) arg))
2829 return -EFAULT;
2830 DBGX("SNDCTL_DSP_SETTRIGGER %d\n", ival);
2831
2832 /*
2833 * If user is disabling I/O and port is not in initial
2834 * state, fail with EINVAL.
2835 */
2836
2837 if (((rport && !(ival & PCM_ENABLE_INPUT)) ||
2838 (wport && !(ival & PCM_ENABLE_OUTPUT))) &&
2839 aport->swstate != SW_INITIAL)
2840 return -EINVAL;
2841
2842 if (rport) {
2843 vwsnd_port_hwstate_t hwstate;
2844 spin_lock_irqsave(&rport->lock, flags);
2845 {
2846 hwstate = rport->hwstate;
2847 if (ival & PCM_ENABLE_INPUT)
2848 rport->flags &= ~DISABLED;
2849 else
2850 rport->flags |= DISABLED;
2851 }
2852 spin_unlock_irqrestore(&rport->lock, flags);
2853 if (hwstate != HW_RUNNING && ival & PCM_ENABLE_INPUT) {
2854
2855 if (rport->swstate == SW_INITIAL)
2856 pcm_setup(devc, rport, wport);
2857 else
2858 li_activate_dma(&rport->chan);
2859 }
2860 }
2861 if (wport) {
2862 vwsnd_port_flags_t pflags;
2863 spin_lock_irqsave(&wport->lock, flags);
2864 {
2865 pflags = wport->flags;
2866 if (ival & PCM_ENABLE_OUTPUT)
2867 wport->flags &= ~DISABLED;
2868 else
2869 wport->flags |= DISABLED;
2870 }
2871 spin_unlock_irqrestore(&wport->lock, flags);
2872 if (pflags & DISABLED && ival & PCM_ENABLE_OUTPUT) {
2873 if (wport->swstate == SW_RUN)
2874 pcm_output(devc, 0, 0);
2875 }
2876 }
2877 return 0;
2878
2879 default:
2880 DBGP("unknown ioctl 0x%x\n", cmd);
2881 return -EINVAL;
2882 }
2883 DBGP("unimplemented ioctl 0x%x\n", cmd);
2884 return -EINVAL;
2885}
2886
Arnd Bergmannd2099742010-07-12 19:53:18 +02002887static long vwsnd_audio_ioctl(struct file *file,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002888 unsigned int cmd,
2889 unsigned long arg)
2890{
2891 vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
2892 int ret;
2893
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02002894 mutex_lock(&vwsnd_mutex);
Ingo Molnar910f5d22006-03-23 03:00:39 -08002895 mutex_lock(&devc->io_mutex);
Arnd Bergmannd2099742010-07-12 19:53:18 +02002896 ret = vwsnd_audio_do_ioctl(file, cmd, arg);
Ingo Molnar910f5d22006-03-23 03:00:39 -08002897 mutex_unlock(&devc->io_mutex);
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02002898 mutex_unlock(&vwsnd_mutex);
Arnd Bergmannd2099742010-07-12 19:53:18 +02002899
Linus Torvalds1da177e2005-04-16 15:20:36 -07002900 return ret;
2901}
2902
2903/* No mmap. */
2904
2905static int vwsnd_audio_mmap(struct file *file, struct vm_area_struct *vma)
2906{
2907 DBGE("(file=0x%p, vma=0x%p)\n", file, vma);
2908 return -ENODEV;
2909}
2910
2911/*
2912 * Open the audio device for read and/or write.
2913 *
2914 * Returns 0 on success, -errno on failure.
2915 */
2916
2917static int vwsnd_audio_open(struct inode *inode, struct file *file)
2918{
2919 vwsnd_dev_t *devc;
2920 int minor = iminor(inode);
2921 int sw_samplefmt;
2922
2923 DBGE("(inode=0x%p, file=0x%p)\n", inode, file);
2924
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02002925 mutex_lock(&vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002926 INC_USE_COUNT;
2927 for (devc = vwsnd_dev_list; devc; devc = devc->next_dev)
2928 if ((devc->audio_minor & ~0x0F) == (minor & ~0x0F))
2929 break;
2930
2931 if (devc == NULL) {
2932 DEC_USE_COUNT;
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02002933 mutex_unlock(&vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002934 return -ENODEV;
2935 }
2936
Ingo Molnar910f5d22006-03-23 03:00:39 -08002937 mutex_lock(&devc->open_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002938 while (devc->open_mode & file->f_mode) {
Ingo Molnar910f5d22006-03-23 03:00:39 -08002939 mutex_unlock(&devc->open_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002940 if (file->f_flags & O_NONBLOCK) {
2941 DEC_USE_COUNT;
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02002942 mutex_unlock(&vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002943 return -EBUSY;
2944 }
2945 interruptible_sleep_on(&devc->open_wait);
2946 if (signal_pending(current)) {
2947 DEC_USE_COUNT;
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02002948 mutex_unlock(&vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002949 return -ERESTARTSYS;
2950 }
Ingo Molnar910f5d22006-03-23 03:00:39 -08002951 mutex_lock(&devc->open_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002952 }
2953 devc->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
Ingo Molnar910f5d22006-03-23 03:00:39 -08002954 mutex_unlock(&devc->open_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002955
2956 /* get default sample format from minor number. */
2957
2958 sw_samplefmt = 0;
2959 if ((minor & 0xF) == SND_DEV_DSP)
2960 sw_samplefmt = AFMT_U8;
2961 else if ((minor & 0xF) == SND_DEV_AUDIO)
2962 sw_samplefmt = AFMT_MU_LAW;
2963 else if ((minor & 0xF) == SND_DEV_DSP16)
2964 sw_samplefmt = AFMT_S16_LE;
2965 else
2966 ASSERT(0);
2967
2968 /* Initialize vwsnd_ports. */
2969
Ingo Molnar910f5d22006-03-23 03:00:39 -08002970 mutex_lock(&devc->io_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002971 {
2972 if (file->f_mode & FMODE_READ) {
2973 devc->rport.swstate = SW_INITIAL;
2974 devc->rport.flags = 0;
2975 devc->rport.sw_channels = 1;
2976 devc->rport.sw_samplefmt = sw_samplefmt;
2977 devc->rport.sw_framerate = 8000;
2978 devc->rport.sw_fragshift = DEFAULT_FRAGSHIFT;
2979 devc->rport.sw_fragcount = DEFAULT_FRAGCOUNT;
2980 devc->rport.sw_subdivshift = DEFAULT_SUBDIVSHIFT;
2981 devc->rport.byte_count = 0;
2982 devc->rport.frag_count = 0;
2983 }
2984 if (file->f_mode & FMODE_WRITE) {
2985 devc->wport.swstate = SW_INITIAL;
2986 devc->wport.flags = 0;
2987 devc->wport.sw_channels = 1;
2988 devc->wport.sw_samplefmt = sw_samplefmt;
2989 devc->wport.sw_framerate = 8000;
2990 devc->wport.sw_fragshift = DEFAULT_FRAGSHIFT;
2991 devc->wport.sw_fragcount = DEFAULT_FRAGCOUNT;
2992 devc->wport.sw_subdivshift = DEFAULT_SUBDIVSHIFT;
2993 devc->wport.byte_count = 0;
2994 devc->wport.frag_count = 0;
2995 }
2996 }
Ingo Molnar910f5d22006-03-23 03:00:39 -08002997 mutex_unlock(&devc->io_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002998
2999 file->private_data = devc;
3000 DBGRV();
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02003001 mutex_unlock(&vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003002 return 0;
3003}
3004
3005/*
3006 * Release (close) the audio device.
3007 */
3008
3009static int vwsnd_audio_release(struct inode *inode, struct file *file)
3010{
3011 vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
3012 vwsnd_port_t *wport = NULL, *rport = NULL;
3013 int err = 0;
3014
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02003015 mutex_lock(&vwsnd_mutex);
Ingo Molnar910f5d22006-03-23 03:00:39 -08003016 mutex_lock(&devc->io_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003017 {
3018 DBGEV("(inode=0x%p, file=0x%p)\n", inode, file);
3019
3020 if (file->f_mode & FMODE_READ)
3021 rport = &devc->rport;
3022 if (file->f_mode & FMODE_WRITE) {
3023 wport = &devc->wport;
3024 pcm_flush_frag(devc);
3025 pcm_write_sync(devc);
3026 }
3027 pcm_shutdown(devc, rport, wport);
3028 if (rport)
3029 rport->swstate = SW_OFF;
3030 if (wport)
3031 wport->swstate = SW_OFF;
3032 }
Ingo Molnar910f5d22006-03-23 03:00:39 -08003033 mutex_unlock(&devc->io_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003034
Ingo Molnar910f5d22006-03-23 03:00:39 -08003035 mutex_lock(&devc->open_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003036 {
3037 devc->open_mode &= ~file->f_mode;
3038 }
Ingo Molnar910f5d22006-03-23 03:00:39 -08003039 mutex_unlock(&devc->open_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003040 wake_up(&devc->open_wait);
3041 DEC_USE_COUNT;
3042 DBGR();
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02003043 mutex_unlock(&vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003044 return err;
3045}
3046
Arjan van de Ven9c2e08c2007-02-12 00:55:37 -08003047static const struct file_operations vwsnd_audio_fops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003048 .owner = THIS_MODULE,
3049 .llseek = no_llseek,
3050 .read = vwsnd_audio_read,
3051 .write = vwsnd_audio_write,
3052 .poll = vwsnd_audio_poll,
Arnd Bergmannd2099742010-07-12 19:53:18 +02003053 .unlocked_ioctl = vwsnd_audio_ioctl,
Linus Torvalds1da177e2005-04-16 15:20:36 -07003054 .mmap = vwsnd_audio_mmap,
3055 .open = vwsnd_audio_open,
3056 .release = vwsnd_audio_release,
3057};
3058
3059/*****************************************************************************/
3060/* mixer driver */
3061
3062/* open the mixer device. */
3063
3064static int vwsnd_mixer_open(struct inode *inode, struct file *file)
3065{
3066 vwsnd_dev_t *devc;
3067
3068 DBGEV("(inode=0x%p, file=0x%p)\n", inode, file);
3069
3070 INC_USE_COUNT;
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02003071 mutex_lock(&vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003072 for (devc = vwsnd_dev_list; devc; devc = devc->next_dev)
3073 if (devc->mixer_minor == iminor(inode))
3074 break;
3075
3076 if (devc == NULL) {
3077 DEC_USE_COUNT;
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02003078 mutex_unlock(&vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003079 return -ENODEV;
3080 }
3081 file->private_data = devc;
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02003082 mutex_unlock(&vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003083 return 0;
3084}
3085
3086/* release (close) the mixer device. */
3087
3088static int vwsnd_mixer_release(struct inode *inode, struct file *file)
3089{
3090 DBGEV("(inode=0x%p, file=0x%p)\n", inode, file);
3091 DEC_USE_COUNT;
3092 return 0;
3093}
3094
3095/* mixer_read_ioctl handles all read ioctls on the mixer device. */
3096
3097static int mixer_read_ioctl(vwsnd_dev_t *devc, unsigned int nr, void __user *arg)
3098{
3099 int val = -1;
3100
3101 DBGEV("(devc=0x%p, nr=0x%x, arg=0x%p)\n", devc, nr, arg);
3102
3103 switch (nr) {
3104 case SOUND_MIXER_CAPS:
3105 val = SOUND_CAP_EXCL_INPUT;
3106 break;
3107
3108 case SOUND_MIXER_DEVMASK:
3109 val = (SOUND_MASK_PCM | SOUND_MASK_LINE |
3110 SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_RECLEV);
3111 break;
3112
3113 case SOUND_MIXER_STEREODEVS:
3114 val = (SOUND_MASK_PCM | SOUND_MASK_LINE |
3115 SOUND_MASK_MIC | SOUND_MASK_CD | SOUND_MASK_RECLEV);
3116 break;
3117
3118 case SOUND_MIXER_OUTMASK:
3119 val = (SOUND_MASK_PCM | SOUND_MASK_LINE |
3120 SOUND_MASK_MIC | SOUND_MASK_CD);
3121 break;
3122
3123 case SOUND_MIXER_RECMASK:
3124 val = (SOUND_MASK_PCM | SOUND_MASK_LINE |
3125 SOUND_MASK_MIC | SOUND_MASK_CD);
3126 break;
3127
3128 case SOUND_MIXER_PCM:
3129 val = ad1843_get_gain(&devc->lith, &ad1843_gain_PCM);
3130 break;
3131
3132 case SOUND_MIXER_LINE:
3133 val = ad1843_get_gain(&devc->lith, &ad1843_gain_LINE);
3134 break;
3135
3136 case SOUND_MIXER_MIC:
3137 val = ad1843_get_gain(&devc->lith, &ad1843_gain_MIC);
3138 break;
3139
3140 case SOUND_MIXER_CD:
3141 val = ad1843_get_gain(&devc->lith, &ad1843_gain_CD);
3142 break;
3143
3144 case SOUND_MIXER_RECLEV:
3145 val = ad1843_get_gain(&devc->lith, &ad1843_gain_RECLEV);
3146 break;
3147
3148 case SOUND_MIXER_RECSRC:
3149 val = ad1843_get_recsrc(&devc->lith);
3150 break;
3151
3152 case SOUND_MIXER_OUTSRC:
3153 val = ad1843_get_outsrc(&devc->lith);
3154 break;
3155
3156 default:
3157 return -EINVAL;
3158 }
3159 return put_user(val, (int __user *) arg);
3160}
3161
3162/* mixer_write_ioctl handles all write ioctls on the mixer device. */
3163
3164static int mixer_write_ioctl(vwsnd_dev_t *devc, unsigned int nr, void __user *arg)
3165{
3166 int val;
3167 int err;
3168
3169 DBGEV("(devc=0x%p, nr=0x%x, arg=0x%p)\n", devc, nr, arg);
3170
3171 err = get_user(val, (int __user *) arg);
3172 if (err)
3173 return -EFAULT;
3174 switch (nr) {
3175 case SOUND_MIXER_PCM:
3176 val = ad1843_set_gain(&devc->lith, &ad1843_gain_PCM, val);
3177 break;
3178
3179 case SOUND_MIXER_LINE:
3180 val = ad1843_set_gain(&devc->lith, &ad1843_gain_LINE, val);
3181 break;
3182
3183 case SOUND_MIXER_MIC:
3184 val = ad1843_set_gain(&devc->lith, &ad1843_gain_MIC, val);
3185 break;
3186
3187 case SOUND_MIXER_CD:
3188 val = ad1843_set_gain(&devc->lith, &ad1843_gain_CD, val);
3189 break;
3190
3191 case SOUND_MIXER_RECLEV:
3192 val = ad1843_set_gain(&devc->lith, &ad1843_gain_RECLEV, val);
3193 break;
3194
3195 case SOUND_MIXER_RECSRC:
3196 if (devc->rport.swbuf || devc->wport.swbuf)
3197 return -EBUSY; /* can't change recsrc while running */
3198 val = ad1843_set_recsrc(&devc->lith, val);
3199 break;
3200
3201 case SOUND_MIXER_OUTSRC:
3202 val = ad1843_set_outsrc(&devc->lith, val);
3203 break;
3204
3205 default:
3206 return -EINVAL;
3207 }
3208 if (val < 0)
3209 return val;
3210 return put_user(val, (int __user *) arg);
3211}
3212
3213/* This is the ioctl entry to the mixer driver. */
3214
Arnd Bergmannd2099742010-07-12 19:53:18 +02003215static long vwsnd_mixer_ioctl(struct file *file,
Linus Torvalds1da177e2005-04-16 15:20:36 -07003216 unsigned int cmd,
3217 unsigned long arg)
3218{
3219 vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
3220 const unsigned int nrmask = _IOC_NRMASK << _IOC_NRSHIFT;
3221 const unsigned int nr = (cmd & nrmask) >> _IOC_NRSHIFT;
3222 int retval;
3223
3224 DBGEV("(devc=0x%p, cmd=0x%x, arg=0x%lx)\n", devc, cmd, arg);
3225
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02003226 mutex_lock(&vwsnd_mutex);
Ingo Molnar910f5d22006-03-23 03:00:39 -08003227 mutex_lock(&devc->mix_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003228 {
3229 if ((cmd & ~nrmask) == MIXER_READ(0))
3230 retval = mixer_read_ioctl(devc, nr, (void __user *) arg);
3231 else if ((cmd & ~nrmask) == MIXER_WRITE(0))
3232 retval = mixer_write_ioctl(devc, nr, (void __user *) arg);
3233 else
3234 retval = -EINVAL;
3235 }
Ingo Molnar910f5d22006-03-23 03:00:39 -08003236 mutex_unlock(&devc->mix_mutex);
Arnd Bergmann645ef9e2010-09-14 21:53:41 +02003237 mutex_unlock(&vwsnd_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003238 return retval;
3239}
3240
Arjan van de Ven9c2e08c2007-02-12 00:55:37 -08003241static const struct file_operations vwsnd_mixer_fops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003242 .owner = THIS_MODULE,
3243 .llseek = no_llseek,
Arnd Bergmannd2099742010-07-12 19:53:18 +02003244 .unlocked_ioctl = vwsnd_mixer_ioctl,
Linus Torvalds1da177e2005-04-16 15:20:36 -07003245 .open = vwsnd_mixer_open,
3246 .release = vwsnd_mixer_release,
3247};
3248
3249/*****************************************************************************/
3250/* probe/attach/unload */
3251
3252/* driver probe routine. Return nonzero if hardware is found. */
3253
3254static int __init probe_vwsnd(struct address_info *hw_config)
3255{
3256 lithium_t lith;
3257 int w;
3258 unsigned long later;
3259
3260 DBGEV("(hw_config=0x%p)\n", hw_config);
3261
3262 /* XXX verify lithium present (to prevent crash on non-vw) */
3263
3264 if (li_create(&lith, hw_config->io_base) != 0) {
3265 printk(KERN_WARNING "probe_vwsnd: can't map lithium\n");
3266 return 0;
3267 }
3268 later = jiffies + 2;
3269 li_writel(&lith, LI_HOST_CONTROLLER, LI_HC_LINK_ENABLE);
3270 do {
3271 w = li_readl(&lith, LI_HOST_CONTROLLER);
3272 } while (w == LI_HC_LINK_ENABLE && time_before(jiffies, later));
3273
3274 li_destroy(&lith);
3275
3276 DBGPV("HC = 0x%04x\n", w);
3277
3278 if ((w == LI_HC_LINK_ENABLE) || (w & LI_HC_LINK_CODEC)) {
3279
3280 /* This may indicate a beta machine with no audio,
3281 * or a future machine with different audio.
3282 * On beta-release 320 w/ no audio, HC == 0x4000 */
3283
3284 printk(KERN_WARNING "probe_vwsnd: audio codec not found\n");
3285 return 0;
3286 }
3287
3288 if (w & LI_HC_LINK_FAILURE) {
3289 printk(KERN_WARNING "probe_vwsnd: can't init audio codec\n");
3290 return 0;
3291 }
3292
3293 printk(KERN_INFO "vwsnd: lithium audio at mmio %#x irq %d\n",
3294 hw_config->io_base, hw_config->irq);
3295
3296 return 1;
3297}
3298
3299/*
3300 * driver attach routine. Initialize driver data structures and
3301 * initialize hardware. A new vwsnd_dev_t is allocated and put
3302 * onto the global list, vwsnd_dev_list.
3303 *
3304 * Return +minor_dev on success, -errno on failure.
3305 */
3306
3307static int __init attach_vwsnd(struct address_info *hw_config)
3308{
3309 vwsnd_dev_t *devc = NULL;
3310 int err = -ENOMEM;
3311
3312 DBGEV("(hw_config=0x%p)\n", hw_config);
3313
3314 devc = kmalloc(sizeof (vwsnd_dev_t), GFP_KERNEL);
3315 if (devc == NULL)
3316 goto fail0;
3317
3318 err = li_create(&devc->lith, hw_config->io_base);
3319 if (err)
3320 goto fail1;
3321
3322 init_waitqueue_head(&devc->open_wait);
3323
3324 devc->rport.hwbuf_size = HWBUF_SIZE;
3325 devc->rport.hwbuf_vaddr = __get_free_pages(GFP_KERNEL, HWBUF_ORDER);
3326 if (!devc->rport.hwbuf_vaddr)
3327 goto fail2;
3328 devc->rport.hwbuf = (void *) devc->rport.hwbuf_vaddr;
3329 devc->rport.hwbuf_paddr = virt_to_phys(devc->rport.hwbuf);
3330
3331 /*
3332 * Quote from the NT driver:
3333 *
3334 * // WARNING!!! HACK to setup output dma!!!
3335 * // This is required because even on output there is some data
3336 * // trickling into the input DMA channel. This is a bug in the
3337 * // Lithium microcode.
3338 * // --sde
3339 *
3340 * We set the input side's DMA base address here. It will remain
3341 * valid until the driver is unloaded.
3342 */
3343
3344 li_writel(&devc->lith, LI_COMM1_BASE,
3345 devc->rport.hwbuf_paddr >> 8 | 1 << (37 - 8));
3346
3347 devc->wport.hwbuf_size = HWBUF_SIZE;
3348 devc->wport.hwbuf_vaddr = __get_free_pages(GFP_KERNEL, HWBUF_ORDER);
3349 if (!devc->wport.hwbuf_vaddr)
3350 goto fail3;
3351 devc->wport.hwbuf = (void *) devc->wport.hwbuf_vaddr;
3352 devc->wport.hwbuf_paddr = virt_to_phys(devc->wport.hwbuf);
3353 DBGP("wport hwbuf = 0x%p\n", devc->wport.hwbuf);
3354
3355 DBGDO(shut_up++);
3356 err = ad1843_init(&devc->lith);
3357 DBGDO(shut_up--);
3358 if (err)
3359 goto fail4;
3360
3361 /* install interrupt handler */
3362
3363 err = request_irq(hw_config->irq, vwsnd_audio_intr, 0, "vwsnd", devc);
3364 if (err)
3365 goto fail5;
3366
3367 /* register this device's drivers. */
3368
3369 devc->audio_minor = register_sound_dsp(&vwsnd_audio_fops, -1);
3370 if ((err = devc->audio_minor) < 0) {
3371 DBGDO(printk(KERN_WARNING
3372 "attach_vwsnd: register_sound_dsp error %d\n",
3373 err));
3374 goto fail6;
3375 }
3376 devc->mixer_minor = register_sound_mixer(&vwsnd_mixer_fops,
3377 devc->audio_minor >> 4);
3378 if ((err = devc->mixer_minor) < 0) {
3379 DBGDO(printk(KERN_WARNING
3380 "attach_vwsnd: register_sound_mixer error %d\n",
3381 err));
3382 goto fail7;
3383 }
3384
3385 /* Squirrel away device indices for unload routine. */
3386
3387 hw_config->slots[0] = devc->audio_minor;
3388
3389 /* Initialize as much of *devc as possible */
3390
Ingo Molnar910f5d22006-03-23 03:00:39 -08003391 mutex_init(&devc->open_mutex);
3392 mutex_init(&devc->io_mutex);
3393 mutex_init(&devc->mix_mutex);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003394 devc->open_mode = 0;
3395 spin_lock_init(&devc->rport.lock);
3396 init_waitqueue_head(&devc->rport.queue);
3397 devc->rport.swstate = SW_OFF;
3398 devc->rport.hwstate = HW_STOPPED;
3399 devc->rport.flags = 0;
3400 devc->rport.swbuf = NULL;
3401 spin_lock_init(&devc->wport.lock);
3402 init_waitqueue_head(&devc->wport.queue);
3403 devc->wport.swstate = SW_OFF;
3404 devc->wport.hwstate = HW_STOPPED;
3405 devc->wport.flags = 0;
3406 devc->wport.swbuf = NULL;
3407
3408 /* Success. Link us onto the local device list. */
3409
3410 devc->next_dev = vwsnd_dev_list;
3411 vwsnd_dev_list = devc;
3412 return devc->audio_minor;
3413
3414 /* So many ways to fail. Undo what we did. */
3415
3416 fail7:
3417 unregister_sound_dsp(devc->audio_minor);
3418 fail6:
3419 free_irq(hw_config->irq, devc);
3420 fail5:
3421 fail4:
3422 free_pages(devc->wport.hwbuf_vaddr, HWBUF_ORDER);
3423 fail3:
3424 free_pages(devc->rport.hwbuf_vaddr, HWBUF_ORDER);
3425 fail2:
3426 li_destroy(&devc->lith);
3427 fail1:
3428 kfree(devc);
3429 fail0:
3430 return err;
3431}
3432
3433static int __exit unload_vwsnd(struct address_info *hw_config)
3434{
3435 vwsnd_dev_t *devc, **devcp;
3436
3437 DBGE("()\n");
3438
3439 devcp = &vwsnd_dev_list;
3440 while ((devc = *devcp)) {
3441 if (devc->audio_minor == hw_config->slots[0]) {
3442 *devcp = devc->next_dev;
3443 break;
3444 }
3445 devcp = &devc->next_dev;
3446 }
3447
3448 if (!devc)
3449 return -ENODEV;
3450
3451 unregister_sound_mixer(devc->mixer_minor);
3452 unregister_sound_dsp(devc->audio_minor);
3453 free_irq(hw_config->irq, devc);
3454 free_pages(devc->wport.hwbuf_vaddr, HWBUF_ORDER);
3455 free_pages(devc->rport.hwbuf_vaddr, HWBUF_ORDER);
3456 li_destroy(&devc->lith);
3457 kfree(devc);
3458
3459 return 0;
3460}
3461
3462/*****************************************************************************/
3463/* initialization and loadable kernel module interface */
3464
3465static struct address_info the_hw_config = {
3466 0xFF001000, /* lithium phys addr */
3467 CO_IRQ(CO_APIC_LI_AUDIO) /* irq */
3468};
3469
3470MODULE_DESCRIPTION("SGI Visual Workstation sound module");
3471MODULE_AUTHOR("Bob Miller <kbob@sgi.com>");
3472MODULE_LICENSE("GPL");
3473
3474static int __init init_vwsnd(void)
3475{
3476 int err;
3477
3478 DBGXV("\n");
3479 DBGXV("sound::vwsnd::init_module()\n");
3480
3481 if (!probe_vwsnd(&the_hw_config))
3482 return -ENODEV;
3483
3484 err = attach_vwsnd(&the_hw_config);
3485 if (err < 0)
3486 return err;
3487 return 0;
3488}
3489
3490static void __exit cleanup_vwsnd(void)
3491{
3492 DBGX("sound::vwsnd::cleanup_module()\n");
3493
3494 unload_vwsnd(&the_hw_config);
3495}
3496
3497module_init(init_vwsnd);
3498module_exit(cleanup_vwsnd);