blob: 77a7480dc4d1bc23881c0b6d4a1e469833576424 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 Madge Ambassador ATM Adapter driver.
3 Copyright (C) 1995-1999 Madge Networks Ltd.
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the Free Software
17 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18
19 The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian
20 system and in the file COPYING in the Linux kernel source.
21*/
22
23/* * dedicated to the memory of Graham Gordon 1971-1998 * */
24
25#include <linux/module.h>
26#include <linux/types.h>
27#include <linux/pci.h>
28#include <linux/kernel.h>
29#include <linux/init.h>
30#include <linux/ioport.h>
31#include <linux/atmdev.h>
32#include <linux/delay.h>
33#include <linux/interrupt.h>
Randy Dunlap3c6b3772006-07-03 19:48:25 -070034#include <linux/poison.h>
Akinobu Mita0a858852006-12-08 02:36:28 -080035#include <linux/bitrev.h>
Daniel Walkereff0dee542008-04-29 03:39:29 -070036#include <linux/mutex.h>
David Woodhouse27d202f2008-06-05 12:59:51 +010037#include <linux/firmware.h>
38#include <linux/ihex.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090039#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070040
Arun Sharma600634972011-07-26 16:09:06 -070041#include <linux/atomic.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070042#include <asm/io.h>
43#include <asm/byteorder.h>
44
45#include "ambassador.h"
46
47#define maintainer_string "Giuliano Procida at Madge Networks <gprocida@madge.com>"
48#define description_string "Madge ATM Ambassador driver"
49#define version_string "1.2.4"
50
51static inline void __init show_version (void) {
52 printk ("%s version %s\n", description_string, version_string);
53}
54
55/*
56
57 Theory of Operation
58
59 I Hardware, detection, initialisation and shutdown.
60
61 1. Supported Hardware
62
63 This driver is for the PCI ATMizer-based Ambassador card (except
64 very early versions). It is not suitable for the similar EISA "TR7"
65 card. Commercially, both cards are known as Collage Server ATM
66 adapters.
67
68 The loader supports image transfer to the card, image start and few
69 other miscellaneous commands.
70
71 Only AAL5 is supported with vpi = 0 and vci in the range 0 to 1023.
72
73 The cards are big-endian.
74
75 2. Detection
76
77 Standard PCI stuff, the early cards are detected and rejected.
78
79 3. Initialisation
80
81 The cards are reset and the self-test results are checked. The
82 microcode image is then transferred and started. This waits for a
83 pointer to a descriptor containing details of the host-based queues
84 and buffers and various parameters etc. Once they are processed
85 normal operations may begin. The BIA is read using a microcode
86 command.
87
88 4. Shutdown
89
90 This may be accomplished either by a card reset or via the microcode
91 shutdown command. Further investigation required.
92
93 5. Persistent state
94
95 The card reset does not affect PCI configuration (good) or the
96 contents of several other "shared run-time registers" (bad) which
97 include doorbell and interrupt control as well as EEPROM and PCI
98 control. The driver must be careful when modifying these registers
99 not to touch bits it does not use and to undo any changes at exit.
100
101 II Driver software
102
103 0. Generalities
104
105 The adapter is quite intelligent (fast) and has a simple interface
106 (few features). VPI is always zero, 1024 VCIs are supported. There
107 is limited cell rate support. UBR channels can be capped and ABR
108 (explicit rate, but not EFCI) is supported. There is no CBR or VBR
109 support.
110
111 1. Driver <-> Adapter Communication
112
113 Apart from the basic loader commands, the driver communicates
114 through three entities: the command queue (CQ), the transmit queue
115 pair (TXQ) and the receive queue pairs (RXQ). These three entities
116 are set up by the host and passed to the microcode just after it has
117 been started.
118
119 All queues are host-based circular queues. They are contiguous and
120 (due to hardware limitations) have some restrictions as to their
121 locations in (bus) memory. They are of the "full means the same as
122 empty so don't do that" variety since the adapter uses pointers
123 internally.
124
125 The queue pairs work as follows: one queue is for supply to the
126 adapter, items in it are pending and are owned by the adapter; the
127 other is the queue for return from the adapter, items in it have
128 been dealt with by the adapter. The host adds items to the supply
129 (TX descriptors and free RX buffer descriptors) and removes items
130 from the return (TX and RX completions). The adapter deals with out
131 of order completions.
132
133 Interrupts (card to host) and the doorbell (host to card) are used
134 for signalling.
135
136 1. CQ
137
138 This is to communicate "open VC", "close VC", "get stats" etc. to
139 the adapter. At most one command is retired every millisecond by the
140 card. There is no out of order completion or notification. The
141 driver needs to check the return code of the command, waiting as
142 appropriate.
143
144 2. TXQ
145
146 TX supply items are of variable length (scatter gather support) and
147 so the queue items are (more or less) pointers to the real thing.
148 Each TX supply item contains a unique, host-supplied handle (the skb
149 bus address seems most sensible as this works for Alphas as well,
150 there is no need to do any endian conversions on the handles).
151
152 TX return items consist of just the handles above.
153
154 3. RXQ (up to 4 of these with different lengths and buffer sizes)
155
156 RX supply items consist of a unique, host-supplied handle (the skb
157 bus address again) and a pointer to the buffer data area.
158
159 RX return items consist of the handle above, the VC, length and a
160 status word. This just screams "oh so easy" doesn't it?
161
162 Note on RX pool sizes:
163
164 Each pool should have enough buffers to handle a back-to-back stream
165 of minimum sized frames on a single VC. For example:
166
167 frame spacing = 3us (about right)
168
169 delay = IRQ lat + RX handling + RX buffer replenish = 20 (us) (a guess)
170
171 min number of buffers for one VC = 1 + delay/spacing (buffers)
172
173 delay/spacing = latency = (20+2)/3 = 7 (buffers) (rounding up)
174
175 The 20us delay assumes that there is no need to sleep; if we need to
176 sleep to get buffers we are going to drop frames anyway.
177
178 In fact, each pool should have enough buffers to support the
179 simultaneous reassembly of a separate frame on each VC and cope with
180 the case in which frames complete in round robin cell fashion on
181 each VC.
182
183 Only one frame can complete at each cell arrival, so if "n" VCs are
184 open, the worst case is to have them all complete frames together
185 followed by all starting new frames together.
186
187 desired number of buffers = n + delay/spacing
188
189 These are the extreme requirements, however, they are "n+k" for some
190 "k" so we have only the constant to choose. This is the argument
191 rx_lats which current defaults to 7.
192
193 Actually, "n ? n+k : 0" is better and this is what is implemented,
194 subject to the limit given by the pool size.
195
196 4. Driver locking
197
198 Simple spinlocks are used around the TX and RX queue mechanisms.
199 Anyone with a faster, working method is welcome to implement it.
200
201 The adapter command queue is protected with a spinlock. We always
202 wait for commands to complete.
203
204 A more complex form of locking is used around parts of the VC open
205 and close functions. There are three reasons for a lock: 1. we need
206 to do atomic rate reservation and release (not used yet), 2. Opening
207 sometimes involves two adapter commands which must not be separated
208 by another command on the same VC, 3. the changes to RX pool size
209 must be atomic. The lock needs to work over context switches, so we
210 use a semaphore.
211
212 III Hardware Features and Microcode Bugs
213
214 1. Byte Ordering
215
216 *%^"$&%^$*&^"$(%^$#&^%$(&#%$*(&^#%!"!"!*!
217
218 2. Memory access
219
220 All structures that are not accessed using DMA must be 4-byte
221 aligned (not a problem) and must not cross 4MB boundaries.
222
223 There is a DMA memory hole at E0000000-E00000FF (groan).
224
225 TX fragments (DMA read) must not cross 4MB boundaries (would be 16MB
226 but for a hardware bug).
227
228 RX buffers (DMA write) must not cross 16MB boundaries and must
229 include spare trailing bytes up to the next 4-byte boundary; they
230 will be written with rubbish.
231
232 The PLX likes to prefetch; if reading up to 4 u32 past the end of
233 each TX fragment is not a problem, then TX can be made to go a
234 little faster by passing a flag at init that disables a prefetch
235 workaround. We do not pass this flag. (new microcode only)
236
237 Now we:
238 . Note that alloc_skb rounds up size to a 16byte boundary.
239 . Ensure all areas do not traverse 4MB boundaries.
240 . Ensure all areas do not start at a E00000xx bus address.
241 (I cannot be certain, but this may always hold with Linux)
242 . Make all failures cause a loud message.
243 . Discard non-conforming SKBs (causes TX failure or RX fill delay).
244 . Discard non-conforming TX fragment descriptors (the TX fails).
245 In the future we could:
246 . Allow RX areas that traverse 4MB (but not 16MB) boundaries.
247 . Segment TX areas into some/more fragments, when necessary.
248 . Relax checks for non-DMA items (ignore hole).
249 . Give scatter-gather (iovec) requirements using ???. (?)
250
251 3. VC close is broken (only for new microcode)
252
253 The VC close adapter microcode command fails to do anything if any
254 frames have been received on the VC but none have been transmitted.
255 Frames continue to be reassembled and passed (with IRQ) to the
256 driver.
257
258 IV To Do List
259
260 . Fix bugs!
261
262 . Timer code may be broken.
263
264 . Deal with buggy VC close (somehow) in microcode 12.
265
266 . Handle interrupted and/or non-blocking writes - is this a job for
267 the protocol layer?
268
269 . Add code to break up TX fragments when they span 4MB boundaries.
270
271 . Add SUNI phy layer (need to know where SUNI lives on card).
272
273 . Implement a tx_alloc fn to (a) satisfy TX alignment etc. and (b)
274 leave extra headroom space for Ambassador TX descriptors.
275
276 . Understand these elements of struct atm_vcc: recvq (proto?),
277 sleep, callback, listenq, backlog_quota, reply and user_back.
278
279 . Adjust TX/RX skb allocation to favour IP with LANE/CLIP (configurable).
280
281 . Impose a TX-pending limit (2?) on each VC, help avoid TX q overflow.
282
283 . Decide whether RX buffer recycling is or can be made completely safe;
284 turn it back on. It looks like Werner is going to axe this.
285
286 . Implement QoS changes on open VCs (involves extracting parts of VC open
287 and close into separate functions and using them to make changes).
288
289 . Hack on command queue so that someone can issue multiple commands and wait
290 on the last one (OR only "no-op" or "wait" commands are waited for).
291
292 . Eliminate need for while-schedule around do_command.
293
294*/
295
Linus Torvalds1da177e2005-04-16 15:20:36 -0700296static void do_housekeeping (unsigned long arg);
297/********** globals **********/
298
299static unsigned short debug = 0;
300static unsigned int cmds = 8;
301static unsigned int txs = 32;
302static unsigned int rxs[NUM_RX_POOLS] = { 64, 64, 64, 64 };
303static unsigned int rxs_bs[NUM_RX_POOLS] = { 4080, 12240, 36720, 65535 };
304static unsigned int rx_lats = 7;
305static unsigned char pci_lat = 0;
306
307static const unsigned long onegigmask = -1 << 30;
308
309/********** access to adapter **********/
310
311static inline void wr_plain (const amb_dev * dev, size_t addr, u32 data) {
312 PRINTD (DBG_FLOW|DBG_REGS, "wr: %08zx <- %08x", addr, data);
313#ifdef AMB_MMIO
314 dev->membase[addr / sizeof(u32)] = data;
315#else
316 outl (data, dev->iobase + addr);
317#endif
318}
319
320static inline u32 rd_plain (const amb_dev * dev, size_t addr) {
321#ifdef AMB_MMIO
322 u32 data = dev->membase[addr / sizeof(u32)];
323#else
324 u32 data = inl (dev->iobase + addr);
325#endif
326 PRINTD (DBG_FLOW|DBG_REGS, "rd: %08zx -> %08x", addr, data);
327 return data;
328}
329
330static inline void wr_mem (const amb_dev * dev, size_t addr, u32 data) {
331 __be32 be = cpu_to_be32 (data);
332 PRINTD (DBG_FLOW|DBG_REGS, "wr: %08zx <- %08x b[%08x]", addr, data, be);
333#ifdef AMB_MMIO
334 dev->membase[addr / sizeof(u32)] = be;
335#else
336 outl (be, dev->iobase + addr);
337#endif
338}
339
340static inline u32 rd_mem (const amb_dev * dev, size_t addr) {
341#ifdef AMB_MMIO
342 __be32 be = dev->membase[addr / sizeof(u32)];
343#else
344 __be32 be = inl (dev->iobase + addr);
345#endif
346 u32 data = be32_to_cpu (be);
347 PRINTD (DBG_FLOW|DBG_REGS, "rd: %08zx -> %08x b[%08x]", addr, data, be);
348 return data;
349}
350
351/********** dump routines **********/
352
353static inline void dump_registers (const amb_dev * dev) {
354#ifdef DEBUG_AMBASSADOR
355 if (debug & DBG_REGS) {
356 size_t i;
357 PRINTD (DBG_REGS, "reading PLX control: ");
358 for (i = 0x00; i < 0x30; i += sizeof(u32))
359 rd_mem (dev, i);
360 PRINTD (DBG_REGS, "reading mailboxes: ");
361 for (i = 0x40; i < 0x60; i += sizeof(u32))
362 rd_mem (dev, i);
363 PRINTD (DBG_REGS, "reading doorb irqev irqen reset:");
364 for (i = 0x60; i < 0x70; i += sizeof(u32))
365 rd_mem (dev, i);
366 }
367#else
368 (void) dev;
369#endif
370 return;
371}
372
373static inline void dump_loader_block (volatile loader_block * lb) {
374#ifdef DEBUG_AMBASSADOR
375 unsigned int i;
376 PRINTDB (DBG_LOAD, "lb @ %p; res: %d, cmd: %d, pay:",
377 lb, be32_to_cpu (lb->result), be32_to_cpu (lb->command));
378 for (i = 0; i < MAX_COMMAND_DATA; ++i)
379 PRINTDM (DBG_LOAD, " %08x", be32_to_cpu (lb->payload.data[i]));
380 PRINTDE (DBG_LOAD, ", vld: %08x", be32_to_cpu (lb->valid));
381#else
382 (void) lb;
383#endif
384 return;
385}
386
387static inline void dump_command (command * cmd) {
388#ifdef DEBUG_AMBASSADOR
389 unsigned int i;
390 PRINTDB (DBG_CMD, "cmd @ %p, req: %08x, pars:",
391 cmd, /*be32_to_cpu*/ (cmd->request));
392 for (i = 0; i < 3; ++i)
393 PRINTDM (DBG_CMD, " %08x", /*be32_to_cpu*/ (cmd->args.par[i]));
394 PRINTDE (DBG_CMD, "");
395#else
396 (void) cmd;
397#endif
398 return;
399}
400
401static inline void dump_skb (char * prefix, unsigned int vc, struct sk_buff * skb) {
402#ifdef DEBUG_AMBASSADOR
403 unsigned int i;
404 unsigned char * data = skb->data;
405 PRINTDB (DBG_DATA, "%s(%u) ", prefix, vc);
406 for (i=0; i<skb->len && i < 256;i++)
407 PRINTDM (DBG_DATA, "%02x ", data[i]);
408 PRINTDE (DBG_DATA,"");
409#else
410 (void) prefix;
411 (void) vc;
412 (void) skb;
413#endif
414 return;
415}
416
417/********** check memory areas for use by Ambassador **********/
418
419/* see limitations under Hardware Features */
420
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700421static int check_area (void * start, size_t length) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700422 // assumes length > 0
423 const u32 fourmegmask = -1 << 22;
424 const u32 twofivesixmask = -1 << 8;
425 const u32 starthole = 0xE0000000;
426 u32 startaddress = virt_to_bus (start);
427 u32 lastaddress = startaddress+length-1;
428 if ((startaddress ^ lastaddress) & fourmegmask ||
429 (startaddress & twofivesixmask) == starthole) {
430 PRINTK (KERN_ERR, "check_area failure: [%x,%x] - mail maintainer!",
431 startaddress, lastaddress);
432 return -1;
433 } else {
434 return 0;
435 }
436}
437
438/********** free an skb (as per ATM device driver documentation) **********/
439
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700440static void amb_kfree_skb (struct sk_buff * skb) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700441 if (ATM_SKB(skb)->vcc->pop) {
442 ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb);
443 } else {
444 dev_kfree_skb_any (skb);
445 }
446}
447
448/********** TX completion **********/
449
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700450static void tx_complete (amb_dev * dev, tx_out * tx) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700451 tx_simple * tx_descr = bus_to_virt (tx->handle);
452 struct sk_buff * skb = tx_descr->skb;
453
454 PRINTD (DBG_FLOW|DBG_TX, "tx_complete %p %p", dev, tx);
455
456 // VC layer stats
457 atomic_inc(&ATM_SKB(skb)->vcc->stats->tx);
458
459 // free the descriptor
460 kfree (tx_descr);
461
462 // free the skb
463 amb_kfree_skb (skb);
464
465 dev->stats.tx_ok++;
466 return;
467}
468
469/********** RX completion **********/
470
471static void rx_complete (amb_dev * dev, rx_out * rx) {
472 struct sk_buff * skb = bus_to_virt (rx->handle);
473 u16 vc = be16_to_cpu (rx->vc);
474 // unused: u16 lec_id = be16_to_cpu (rx->lec_id);
475 u16 status = be16_to_cpu (rx->status);
476 u16 rx_len = be16_to_cpu (rx->length);
477
478 PRINTD (DBG_FLOW|DBG_RX, "rx_complete %p %p (len=%hu)", dev, rx, rx_len);
479
480 // XXX move this in and add to VC stats ???
481 if (!status) {
482 struct atm_vcc * atm_vcc = dev->rxer[vc];
483 dev->stats.rx.ok++;
484
485 if (atm_vcc) {
486
487 if (rx_len <= atm_vcc->qos.rxtp.max_sdu) {
488
489 if (atm_charge (atm_vcc, skb->truesize)) {
490
491 // prepare socket buffer
492 ATM_SKB(skb)->vcc = atm_vcc;
493 skb_put (skb, rx_len);
494
495 dump_skb ("<<<", vc, skb);
496
497 // VC layer stats
498 atomic_inc(&atm_vcc->stats->rx);
Patrick McHardya61bbcf2005-08-14 17:24:31 -0700499 __net_timestamp(skb);
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300500 // end of our responsibility
Linus Torvalds1da177e2005-04-16 15:20:36 -0700501 atm_vcc->push (atm_vcc, skb);
502 return;
503
504 } else {
505 // someone fix this (message), please!
506 PRINTD (DBG_INFO|DBG_RX, "dropped thanks to atm_charge (vc %hu, truesize %u)", vc, skb->truesize);
507 // drop stats incremented in atm_charge
508 }
509
510 } else {
511 PRINTK (KERN_INFO, "dropped over-size frame");
512 // should we count this?
513 atomic_inc(&atm_vcc->stats->rx_drop);
514 }
515
516 } else {
517 PRINTD (DBG_WARN|DBG_RX, "got frame but RX closed for channel %hu", vc);
518 // this is an adapter bug, only in new version of microcode
519 }
520
521 } else {
522 dev->stats.rx.error++;
523 if (status & CRC_ERR)
524 dev->stats.rx.badcrc++;
525 if (status & LEN_ERR)
526 dev->stats.rx.toolong++;
527 if (status & ABORT_ERR)
528 dev->stats.rx.aborted++;
529 if (status & UNUSED_ERR)
530 dev->stats.rx.unused++;
531 }
532
533 dev_kfree_skb_any (skb);
534 return;
535}
536
537/*
538
539 Note on queue handling.
540
541 Here "give" and "take" refer to queue entries and a queue (pair)
542 rather than frames to or from the host or adapter. Empty frame
543 buffers are given to the RX queue pair and returned unused or
544 containing RX frames. TX frames (well, pointers to TX fragment
545 lists) are given to the TX queue pair, completions are returned.
546
547*/
548
549/********** command queue **********/
550
551// I really don't like this, but it's the best I can do at the moment
552
553// also, the callers are responsible for byte order as the microcode
554// sometimes does 16-bit accesses (yuk yuk yuk)
555
556static int command_do (amb_dev * dev, command * cmd) {
557 amb_cq * cq = &dev->cq;
558 volatile amb_cq_ptrs * ptrs = &cq->ptrs;
559 command * my_slot;
560
561 PRINTD (DBG_FLOW|DBG_CMD, "command_do %p", dev);
562
563 if (test_bit (dead, &dev->flags))
564 return 0;
565
566 spin_lock (&cq->lock);
567
568 // if not full...
569 if (cq->pending < cq->maximum) {
570 // remember my slot for later
571 my_slot = ptrs->in;
572 PRINTD (DBG_CMD, "command in slot %p", my_slot);
573
574 dump_command (cmd);
575
576 // copy command in
577 *ptrs->in = *cmd;
578 cq->pending++;
579 ptrs->in = NEXTQ (ptrs->in, ptrs->start, ptrs->limit);
580
581 // mail the command
582 wr_mem (dev, offsetof(amb_mem, mb.adapter.cmd_address), virt_to_bus (ptrs->in));
583
584 if (cq->pending > cq->high)
585 cq->high = cq->pending;
586 spin_unlock (&cq->lock);
587
588 // these comments were in a while-loop before, msleep removes the loop
589 // go to sleep
590 // PRINTD (DBG_CMD, "wait: sleeping %lu for command", timeout);
591 msleep(cq->pending);
592
593 // wait for my slot to be reached (all waiters are here or above, until...)
594 while (ptrs->out != my_slot) {
595 PRINTD (DBG_CMD, "wait: command slot (now at %p)", ptrs->out);
596 set_current_state(TASK_UNINTERRUPTIBLE);
597 schedule();
598 }
599
600 // wait on my slot (... one gets to its slot, and... )
601 while (ptrs->out->request != cpu_to_be32 (SRB_COMPLETE)) {
602 PRINTD (DBG_CMD, "wait: command slot completion");
603 set_current_state(TASK_UNINTERRUPTIBLE);
604 schedule();
605 }
606
607 PRINTD (DBG_CMD, "command complete");
608 // update queue (... moves the queue along to the next slot)
609 spin_lock (&cq->lock);
610 cq->pending--;
611 // copy command out
612 *cmd = *ptrs->out;
613 ptrs->out = NEXTQ (ptrs->out, ptrs->start, ptrs->limit);
614 spin_unlock (&cq->lock);
615
616 return 0;
617 } else {
618 cq->filled++;
619 spin_unlock (&cq->lock);
620 return -EAGAIN;
621 }
622
623}
624
625/********** TX queue pair **********/
626
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700627static int tx_give (amb_dev * dev, tx_in * tx) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700628 amb_txq * txq = &dev->txq;
629 unsigned long flags;
630
631 PRINTD (DBG_FLOW|DBG_TX, "tx_give %p", dev);
632
633 if (test_bit (dead, &dev->flags))
634 return 0;
635
636 spin_lock_irqsave (&txq->lock, flags);
637
638 if (txq->pending < txq->maximum) {
639 PRINTD (DBG_TX, "TX in slot %p", txq->in.ptr);
640
641 *txq->in.ptr = *tx;
642 txq->pending++;
643 txq->in.ptr = NEXTQ (txq->in.ptr, txq->in.start, txq->in.limit);
644 // hand over the TX and ring the bell
645 wr_mem (dev, offsetof(amb_mem, mb.adapter.tx_address), virt_to_bus (txq->in.ptr));
646 wr_mem (dev, offsetof(amb_mem, doorbell), TX_FRAME);
647
648 if (txq->pending > txq->high)
649 txq->high = txq->pending;
650 spin_unlock_irqrestore (&txq->lock, flags);
651 return 0;
652 } else {
653 txq->filled++;
654 spin_unlock_irqrestore (&txq->lock, flags);
655 return -EAGAIN;
656 }
657}
658
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700659static int tx_take (amb_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700660 amb_txq * txq = &dev->txq;
661 unsigned long flags;
662
663 PRINTD (DBG_FLOW|DBG_TX, "tx_take %p", dev);
664
665 spin_lock_irqsave (&txq->lock, flags);
666
667 if (txq->pending && txq->out.ptr->handle) {
668 // deal with TX completion
669 tx_complete (dev, txq->out.ptr);
670 // mark unused again
671 txq->out.ptr->handle = 0;
672 // remove item
673 txq->pending--;
674 txq->out.ptr = NEXTQ (txq->out.ptr, txq->out.start, txq->out.limit);
675
676 spin_unlock_irqrestore (&txq->lock, flags);
677 return 0;
678 } else {
679
680 spin_unlock_irqrestore (&txq->lock, flags);
681 return -1;
682 }
683}
684
685/********** RX queue pairs **********/
686
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700687static int rx_give (amb_dev * dev, rx_in * rx, unsigned char pool) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700688 amb_rxq * rxq = &dev->rxq[pool];
689 unsigned long flags;
690
691 PRINTD (DBG_FLOW|DBG_RX, "rx_give %p[%hu]", dev, pool);
692
693 spin_lock_irqsave (&rxq->lock, flags);
694
695 if (rxq->pending < rxq->maximum) {
696 PRINTD (DBG_RX, "RX in slot %p", rxq->in.ptr);
697
698 *rxq->in.ptr = *rx;
699 rxq->pending++;
700 rxq->in.ptr = NEXTQ (rxq->in.ptr, rxq->in.start, rxq->in.limit);
701 // hand over the RX buffer
702 wr_mem (dev, offsetof(amb_mem, mb.adapter.rx_address[pool]), virt_to_bus (rxq->in.ptr));
703
704 spin_unlock_irqrestore (&rxq->lock, flags);
705 return 0;
706 } else {
707 spin_unlock_irqrestore (&rxq->lock, flags);
708 return -1;
709 }
710}
711
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700712static int rx_take (amb_dev * dev, unsigned char pool) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700713 amb_rxq * rxq = &dev->rxq[pool];
714 unsigned long flags;
715
716 PRINTD (DBG_FLOW|DBG_RX, "rx_take %p[%hu]", dev, pool);
717
718 spin_lock_irqsave (&rxq->lock, flags);
719
720 if (rxq->pending && (rxq->out.ptr->status || rxq->out.ptr->length)) {
721 // deal with RX completion
722 rx_complete (dev, rxq->out.ptr);
723 // mark unused again
724 rxq->out.ptr->status = 0;
725 rxq->out.ptr->length = 0;
726 // remove item
727 rxq->pending--;
728 rxq->out.ptr = NEXTQ (rxq->out.ptr, rxq->out.start, rxq->out.limit);
729
730 if (rxq->pending < rxq->low)
731 rxq->low = rxq->pending;
732 spin_unlock_irqrestore (&rxq->lock, flags);
733 return 0;
734 } else {
735 if (!rxq->pending && rxq->buffers_wanted)
736 rxq->emptied++;
737 spin_unlock_irqrestore (&rxq->lock, flags);
738 return -1;
739 }
740}
741
742/********** RX Pool handling **********/
743
744/* pre: buffers_wanted = 0, post: pending = 0 */
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700745static void drain_rx_pool (amb_dev * dev, unsigned char pool) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700746 amb_rxq * rxq = &dev->rxq[pool];
747
748 PRINTD (DBG_FLOW|DBG_POOL, "drain_rx_pool %p %hu", dev, pool);
749
750 if (test_bit (dead, &dev->flags))
751 return;
752
753 /* we are not quite like the fill pool routines as we cannot just
754 remove one buffer, we have to remove all of them, but we might as
755 well pretend... */
756 if (rxq->pending > rxq->buffers_wanted) {
757 command cmd;
758 cmd.request = cpu_to_be32 (SRB_FLUSH_BUFFER_Q);
759 cmd.args.flush.flags = cpu_to_be32 (pool << SRB_POOL_SHIFT);
760 while (command_do (dev, &cmd))
761 schedule();
762 /* the pool may also be emptied via the interrupt handler */
763 while (rxq->pending > rxq->buffers_wanted)
764 if (rx_take (dev, pool))
765 schedule();
766 }
767
768 return;
769}
770
771static void drain_rx_pools (amb_dev * dev) {
772 unsigned char pool;
773
774 PRINTD (DBG_FLOW|DBG_POOL, "drain_rx_pools %p", dev);
775
776 for (pool = 0; pool < NUM_RX_POOLS; ++pool)
777 drain_rx_pool (dev, pool);
778}
779
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700780static void fill_rx_pool (amb_dev * dev, unsigned char pool,
Al Virodd0fc662005-10-07 07:46:04 +0100781 gfp_t priority)
Victor Fusco5938a7b2005-07-19 13:56:29 -0700782{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700783 rx_in rx;
784 amb_rxq * rxq;
785
786 PRINTD (DBG_FLOW|DBG_POOL, "fill_rx_pool %p %hu %x", dev, pool, priority);
787
788 if (test_bit (dead, &dev->flags))
789 return;
790
791 rxq = &dev->rxq[pool];
792 while (rxq->pending < rxq->maximum && rxq->pending < rxq->buffers_wanted) {
793
794 struct sk_buff * skb = alloc_skb (rxq->buffer_size, priority);
795 if (!skb) {
796 PRINTD (DBG_SKB|DBG_POOL, "failed to allocate skb for RX pool %hu", pool);
797 return;
798 }
799 if (check_area (skb->data, skb->truesize)) {
800 dev_kfree_skb_any (skb);
801 return;
802 }
803 // cast needed as there is no %? for pointer differences
804 PRINTD (DBG_SKB, "allocated skb at %p, head %p, area %li",
Alexander Duyckec47ea82012-05-04 14:26:56 +0000805 skb, skb->head, (long) skb_end_offset(skb));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700806 rx.handle = virt_to_bus (skb);
807 rx.host_address = cpu_to_be32 (virt_to_bus (skb->data));
808 if (rx_give (dev, &rx, pool))
809 dev_kfree_skb_any (skb);
810
811 }
812
813 return;
814}
815
Wang Shaoyan135d23d2011-07-08 03:01:43 +0000816// top up all RX pools
Linus Torvalds1da177e2005-04-16 15:20:36 -0700817static void fill_rx_pools (amb_dev * dev) {
818 unsigned char pool;
819
820 PRINTD (DBG_FLOW|DBG_POOL, "fill_rx_pools %p", dev);
821
822 for (pool = 0; pool < NUM_RX_POOLS; ++pool)
823 fill_rx_pool (dev, pool, GFP_ATOMIC);
824
825 return;
826}
827
828/********** enable host interrupts **********/
829
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700830static void interrupts_on (amb_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700831 wr_plain (dev, offsetof(amb_mem, interrupt_control),
832 rd_plain (dev, offsetof(amb_mem, interrupt_control))
833 | AMB_INTERRUPT_BITS);
834}
835
836/********** disable host interrupts **********/
837
Denys Vlasenkoa5b2db62008-04-03 14:59:55 -0700838static void interrupts_off (amb_dev * dev) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700839 wr_plain (dev, offsetof(amb_mem, interrupt_control),
840 rd_plain (dev, offsetof(amb_mem, interrupt_control))
841 &~ AMB_INTERRUPT_BITS);
842}
843
844/********** interrupt handling **********/
845
David Howells7d12e782006-10-05 14:55:46 +0100846static irqreturn_t interrupt_handler(int irq, void *dev_id) {
Jeff Garzikc7bec5a2006-10-06 15:00:58 -0400847 amb_dev * dev = dev_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700848
849 PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler: %p", dev_id);
850
Linus Torvalds1da177e2005-04-16 15:20:36 -0700851 {
852 u32 interrupt = rd_plain (dev, offsetof(amb_mem, interrupt));
853
854 // for us or someone else sharing the same interrupt
855 if (!interrupt) {
856 PRINTD (DBG_IRQ, "irq not for me: %d", irq);
857 return IRQ_NONE;
858 }
859
860 // definitely for us
861 PRINTD (DBG_IRQ, "FYI: interrupt was %08x", interrupt);
862 wr_plain (dev, offsetof(amb_mem, interrupt), -1);
863 }
864
865 {
866 unsigned int irq_work = 0;
867 unsigned char pool;
868 for (pool = 0; pool < NUM_RX_POOLS; ++pool)
869 while (!rx_take (dev, pool))
870 ++irq_work;
871 while (!tx_take (dev))
872 ++irq_work;
873
874 if (irq_work) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700875 fill_rx_pools (dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700876
877 PRINTD (DBG_IRQ, "work done: %u", irq_work);
878 } else {
879 PRINTD (DBG_IRQ|DBG_WARN, "no work done");
880 }
881 }
882
883 PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler done: %p", dev_id);
884 return IRQ_HANDLED;
885}
886
887/********** make rate (not quite as much fun as Horizon) **********/
888
Jeff Garzik3a4e5e22006-10-03 16:27:55 -0700889static int make_rate (unsigned int rate, rounding r,
890 u16 * bits, unsigned int * actual) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700891 unsigned char exp = -1; // hush gcc
892 unsigned int man = -1; // hush gcc
893
894 PRINTD (DBG_FLOW|DBG_QOS, "make_rate %u", rate);
895
896 // rates in cells per second, ITU format (nasty 16-bit floating-point)
897 // given 5-bit e and 9-bit m:
898 // rate = EITHER (1+m/2^9)*2^e OR 0
899 // bits = EITHER 1<<14 | e<<9 | m OR 0
900 // (bit 15 is "reserved", bit 14 "non-zero")
901 // smallest rate is 0 (special representation)
902 // largest rate is (1+511/512)*2^31 = 4290772992 (< 2^32-1)
903 // smallest non-zero rate is (1+0/512)*2^0 = 1 (> 0)
904 // simple algorithm:
905 // find position of top bit, this gives e
906 // remove top bit and shift (rounding if feeling clever) by 9-e
907
908 // ucode bug: please don't set bit 14! so 0 rate not representable
909
910 if (rate > 0xffc00000U) {
911 // larger than largest representable rate
912
913 if (r == round_up) {
914 return -EINVAL;
915 } else {
916 exp = 31;
917 man = 511;
918 }
919
920 } else if (rate) {
921 // representable rate
922
923 exp = 31;
924 man = rate;
925
926 // invariant: rate = man*2^(exp-31)
927 while (!(man & (1<<31))) {
928 exp = exp - 1;
929 man = man<<1;
930 }
931
932 // man has top bit set
933 // rate = (2^31+(man-2^31))*2^(exp-31)
934 // rate = (1+(man-2^31)/2^31)*2^exp
935 man = man<<1;
936 man &= 0xffffffffU; // a nop on 32-bit systems
937 // rate = (1+man/2^32)*2^exp
938
939 // exp is in the range 0 to 31, man is in the range 0 to 2^32-1
940 // time to lose significance... we want m in the range 0 to 2^9-1
941 // rounding presents a minor problem... we first decide which way
942 // we are rounding (based on given rounding direction and possibly
943 // the bits of the mantissa that are to be discarded).
944
945 switch (r) {
946 case round_down: {
947 // just truncate
948 man = man>>(32-9);
949 break;
950 }
951 case round_up: {
952 // check all bits that we are discarding
Alexey Dobriyan5f3f24f2006-11-13 16:12:08 -0800953 if (man & (~0U>>9)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700954 man = (man>>(32-9)) + 1;
955 if (man == (1<<9)) {
956 // no need to check for round up outside of range
957 man = 0;
958 exp += 1;
959 }
960 } else {
961 man = (man>>(32-9));
962 }
963 break;
964 }
965 case round_nearest: {
966 // check msb that we are discarding
967 if (man & (1<<(32-9-1))) {
968 man = (man>>(32-9)) + 1;
969 if (man == (1<<9)) {
970 // no need to check for round up outside of range
971 man = 0;
972 exp += 1;
973 }
974 } else {
975 man = (man>>(32-9));
976 }
977 break;
978 }
979 }
980
981 } else {
982 // zero rate - not representable
983
984 if (r == round_down) {
985 return -EINVAL;
986 } else {
987 exp = 0;
988 man = 0;
989 }
990
991 }
992
993 PRINTD (DBG_QOS, "rate: man=%u, exp=%hu", man, exp);
994
995 if (bits)
996 *bits = /* (1<<14) | */ (exp<<9) | man;
997
998 if (actual)
999 *actual = (exp >= 9)
1000 ? (1 << exp) + (man << (exp-9))
1001 : (1 << exp) + ((man + (1<<(9-exp-1))) >> (9-exp));
1002
1003 return 0;
1004}
1005
1006/********** Linux ATM Operations **********/
1007
1008// some are not yet implemented while others do not make sense for
1009// this device
1010
1011/********** Open a VC **********/
1012
1013static int amb_open (struct atm_vcc * atm_vcc)
1014{
1015 int error;
1016
1017 struct atm_qos * qos;
1018 struct atm_trafprm * txtp;
1019 struct atm_trafprm * rxtp;
Jeff Garzikb1734d22007-07-17 02:32:21 -04001020 u16 tx_rate_bits = -1; // hush gcc
Linus Torvalds1da177e2005-04-16 15:20:36 -07001021 u16 tx_vc_bits = -1; // hush gcc
1022 u16 tx_frame_bits = -1; // hush gcc
1023
1024 amb_dev * dev = AMB_DEV(atm_vcc->dev);
1025 amb_vcc * vcc;
1026 unsigned char pool = -1; // hush gcc
1027 short vpi = atm_vcc->vpi;
1028 int vci = atm_vcc->vci;
1029
1030 PRINTD (DBG_FLOW|DBG_VCC, "amb_open %x %x", vpi, vci);
1031
1032#ifdef ATM_VPI_UNSPEC
1033 // UNSPEC is deprecated, remove this code eventually
1034 if (vpi == ATM_VPI_UNSPEC || vci == ATM_VCI_UNSPEC) {
1035 PRINTK (KERN_WARNING, "rejecting open with unspecified VPI/VCI (deprecated)");
1036 return -EINVAL;
1037 }
1038#endif
1039
1040 if (!(0 <= vpi && vpi < (1<<NUM_VPI_BITS) &&
1041 0 <= vci && vci < (1<<NUM_VCI_BITS))) {
1042 PRINTD (DBG_WARN|DBG_VCC, "VPI/VCI out of range: %hd/%d", vpi, vci);
1043 return -EINVAL;
1044 }
1045
1046 qos = &atm_vcc->qos;
1047
1048 if (qos->aal != ATM_AAL5) {
1049 PRINTD (DBG_QOS, "AAL not supported");
1050 return -EINVAL;
1051 }
1052
1053 // traffic parameters
1054
1055 PRINTD (DBG_QOS, "TX:");
1056 txtp = &qos->txtp;
1057 if (txtp->traffic_class != ATM_NONE) {
1058 switch (txtp->traffic_class) {
1059 case ATM_UBR: {
1060 // we take "the PCR" as a rate-cap
1061 int pcr = atm_pcr_goal (txtp);
1062 if (!pcr) {
1063 // no rate cap
1064 tx_rate_bits = 0;
1065 tx_vc_bits = TX_UBR;
1066 tx_frame_bits = TX_FRAME_NOTCAP;
1067 } else {
1068 rounding r;
1069 if (pcr < 0) {
1070 r = round_down;
1071 pcr = -pcr;
1072 } else {
1073 r = round_up;
1074 }
1075 error = make_rate (pcr, r, &tx_rate_bits, NULL);
Jeff Garzikb1734d22007-07-17 02:32:21 -04001076 if (error)
1077 return error;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001078 tx_vc_bits = TX_UBR_CAPPED;
1079 tx_frame_bits = TX_FRAME_CAPPED;
1080 }
1081 break;
1082 }
1083#if 0
1084 case ATM_ABR: {
1085 pcr = atm_pcr_goal (txtp);
1086 PRINTD (DBG_QOS, "pcr goal = %d", pcr);
1087 break;
1088 }
1089#endif
1090 default: {
1091 // PRINTD (DBG_QOS, "request for non-UBR/ABR denied");
1092 PRINTD (DBG_QOS, "request for non-UBR denied");
1093 return -EINVAL;
1094 }
1095 }
1096 PRINTD (DBG_QOS, "tx_rate_bits=%hx, tx_vc_bits=%hx",
1097 tx_rate_bits, tx_vc_bits);
1098 }
1099
1100 PRINTD (DBG_QOS, "RX:");
1101 rxtp = &qos->rxtp;
1102 if (rxtp->traffic_class == ATM_NONE) {
1103 // do nothing
1104 } else {
1105 // choose an RX pool (arranged in increasing size)
1106 for (pool = 0; pool < NUM_RX_POOLS; ++pool)
1107 if ((unsigned int) rxtp->max_sdu <= dev->rxq[pool].buffer_size) {
1108 PRINTD (DBG_VCC|DBG_QOS|DBG_POOL, "chose pool %hu (max_sdu %u <= %u)",
1109 pool, rxtp->max_sdu, dev->rxq[pool].buffer_size);
1110 break;
1111 }
1112 if (pool == NUM_RX_POOLS) {
1113 PRINTD (DBG_WARN|DBG_VCC|DBG_QOS|DBG_POOL,
1114 "no pool suitable for VC (RX max_sdu %d is too large)",
1115 rxtp->max_sdu);
1116 return -EINVAL;
1117 }
1118
1119 switch (rxtp->traffic_class) {
1120 case ATM_UBR: {
1121 break;
1122 }
1123#if 0
1124 case ATM_ABR: {
1125 pcr = atm_pcr_goal (rxtp);
1126 PRINTD (DBG_QOS, "pcr goal = %d", pcr);
1127 break;
1128 }
1129#endif
1130 default: {
1131 // PRINTD (DBG_QOS, "request for non-UBR/ABR denied");
1132 PRINTD (DBG_QOS, "request for non-UBR denied");
1133 return -EINVAL;
1134 }
1135 }
1136 }
1137
1138 // get space for our vcc stuff
1139 vcc = kmalloc (sizeof(amb_vcc), GFP_KERNEL);
1140 if (!vcc) {
1141 PRINTK (KERN_ERR, "out of memory!");
1142 return -ENOMEM;
1143 }
1144 atm_vcc->dev_data = (void *) vcc;
1145
1146 // no failures beyond this point
1147
1148 // we are not really "immediately before allocating the connection
1149 // identifier in hardware", but it will just have to do!
1150 set_bit(ATM_VF_ADDR,&atm_vcc->flags);
1151
1152 if (txtp->traffic_class != ATM_NONE) {
1153 command cmd;
1154
1155 vcc->tx_frame_bits = tx_frame_bits;
1156
Daniel Walkereff0dee542008-04-29 03:39:29 -07001157 mutex_lock(&dev->vcc_sf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001158 if (dev->rxer[vci]) {
1159 // RXer on the channel already, just modify rate...
1160 cmd.request = cpu_to_be32 (SRB_MODIFY_VC_RATE);
1161 cmd.args.modify_rate.vc = cpu_to_be32 (vci); // vpi 0
1162 cmd.args.modify_rate.rate = cpu_to_be32 (tx_rate_bits << SRB_RATE_SHIFT);
1163 while (command_do (dev, &cmd))
1164 schedule();
1165 // ... and TX flags, preserving the RX pool
1166 cmd.request = cpu_to_be32 (SRB_MODIFY_VC_FLAGS);
1167 cmd.args.modify_flags.vc = cpu_to_be32 (vci); // vpi 0
1168 cmd.args.modify_flags.flags = cpu_to_be32
1169 ( (AMB_VCC(dev->rxer[vci])->rx_info.pool << SRB_POOL_SHIFT)
1170 | (tx_vc_bits << SRB_FLAGS_SHIFT) );
1171 while (command_do (dev, &cmd))
1172 schedule();
1173 } else {
1174 // no RXer on the channel, just open (with pool zero)
1175 cmd.request = cpu_to_be32 (SRB_OPEN_VC);
1176 cmd.args.open.vc = cpu_to_be32 (vci); // vpi 0
1177 cmd.args.open.flags = cpu_to_be32 (tx_vc_bits << SRB_FLAGS_SHIFT);
1178 cmd.args.open.rate = cpu_to_be32 (tx_rate_bits << SRB_RATE_SHIFT);
1179 while (command_do (dev, &cmd))
1180 schedule();
1181 }
1182 dev->txer[vci].tx_present = 1;
Daniel Walkereff0dee542008-04-29 03:39:29 -07001183 mutex_unlock(&dev->vcc_sf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001184 }
1185
1186 if (rxtp->traffic_class != ATM_NONE) {
1187 command cmd;
1188
1189 vcc->rx_info.pool = pool;
1190
Daniel Walkereff0dee542008-04-29 03:39:29 -07001191 mutex_lock(&dev->vcc_sf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001192 /* grow RX buffer pool */
1193 if (!dev->rxq[pool].buffers_wanted)
1194 dev->rxq[pool].buffers_wanted = rx_lats;
1195 dev->rxq[pool].buffers_wanted += 1;
1196 fill_rx_pool (dev, pool, GFP_KERNEL);
1197
1198 if (dev->txer[vci].tx_present) {
1199 // TXer on the channel already
1200 // switch (from pool zero) to this pool, preserving the TX bits
1201 cmd.request = cpu_to_be32 (SRB_MODIFY_VC_FLAGS);
1202 cmd.args.modify_flags.vc = cpu_to_be32 (vci); // vpi 0
1203 cmd.args.modify_flags.flags = cpu_to_be32
1204 ( (pool << SRB_POOL_SHIFT)
1205 | (dev->txer[vci].tx_vc_bits << SRB_FLAGS_SHIFT) );
1206 } else {
1207 // no TXer on the channel, open the VC (with no rate info)
1208 cmd.request = cpu_to_be32 (SRB_OPEN_VC);
1209 cmd.args.open.vc = cpu_to_be32 (vci); // vpi 0
1210 cmd.args.open.flags = cpu_to_be32 (pool << SRB_POOL_SHIFT);
1211 cmd.args.open.rate = cpu_to_be32 (0);
1212 }
1213 while (command_do (dev, &cmd))
1214 schedule();
1215 // this link allows RX frames through
1216 dev->rxer[vci] = atm_vcc;
Daniel Walkereff0dee542008-04-29 03:39:29 -07001217 mutex_unlock(&dev->vcc_sf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001218 }
1219
1220 // indicate readiness
1221 set_bit(ATM_VF_READY,&atm_vcc->flags);
1222
1223 return 0;
1224}
1225
1226/********** Close a VC **********/
1227
1228static void amb_close (struct atm_vcc * atm_vcc) {
1229 amb_dev * dev = AMB_DEV (atm_vcc->dev);
1230 amb_vcc * vcc = AMB_VCC (atm_vcc);
1231 u16 vci = atm_vcc->vci;
1232
1233 PRINTD (DBG_VCC|DBG_FLOW, "amb_close");
1234
1235 // indicate unreadiness
1236 clear_bit(ATM_VF_READY,&atm_vcc->flags);
1237
1238 // disable TXing
1239 if (atm_vcc->qos.txtp.traffic_class != ATM_NONE) {
1240 command cmd;
1241
Daniel Walkereff0dee542008-04-29 03:39:29 -07001242 mutex_lock(&dev->vcc_sf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001243 if (dev->rxer[vci]) {
1244 // RXer still on the channel, just modify rate... XXX not really needed
1245 cmd.request = cpu_to_be32 (SRB_MODIFY_VC_RATE);
1246 cmd.args.modify_rate.vc = cpu_to_be32 (vci); // vpi 0
1247 cmd.args.modify_rate.rate = cpu_to_be32 (0);
1248 // ... and clear TX rate flags (XXX to stop RM cell output?), preserving RX pool
1249 } else {
1250 // no RXer on the channel, close channel
1251 cmd.request = cpu_to_be32 (SRB_CLOSE_VC);
1252 cmd.args.close.vc = cpu_to_be32 (vci); // vpi 0
1253 }
1254 dev->txer[vci].tx_present = 0;
1255 while (command_do (dev, &cmd))
1256 schedule();
Daniel Walkereff0dee542008-04-29 03:39:29 -07001257 mutex_unlock(&dev->vcc_sf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001258 }
1259
1260 // disable RXing
1261 if (atm_vcc->qos.rxtp.traffic_class != ATM_NONE) {
1262 command cmd;
1263
1264 // this is (the?) one reason why we need the amb_vcc struct
1265 unsigned char pool = vcc->rx_info.pool;
1266
Daniel Walkereff0dee542008-04-29 03:39:29 -07001267 mutex_lock(&dev->vcc_sf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001268 if (dev->txer[vci].tx_present) {
1269 // TXer still on the channel, just go to pool zero XXX not really needed
1270 cmd.request = cpu_to_be32 (SRB_MODIFY_VC_FLAGS);
1271 cmd.args.modify_flags.vc = cpu_to_be32 (vci); // vpi 0
1272 cmd.args.modify_flags.flags = cpu_to_be32
1273 (dev->txer[vci].tx_vc_bits << SRB_FLAGS_SHIFT);
1274 } else {
1275 // no TXer on the channel, close the VC
1276 cmd.request = cpu_to_be32 (SRB_CLOSE_VC);
1277 cmd.args.close.vc = cpu_to_be32 (vci); // vpi 0
1278 }
1279 // forget the rxer - no more skbs will be pushed
1280 if (atm_vcc != dev->rxer[vci])
1281 PRINTK (KERN_ERR, "%s vcc=%p rxer[vci]=%p",
1282 "arghhh! we're going to die!",
1283 vcc, dev->rxer[vci]);
1284 dev->rxer[vci] = NULL;
1285 while (command_do (dev, &cmd))
1286 schedule();
1287
1288 /* shrink RX buffer pool */
1289 dev->rxq[pool].buffers_wanted -= 1;
1290 if (dev->rxq[pool].buffers_wanted == rx_lats) {
1291 dev->rxq[pool].buffers_wanted = 0;
1292 drain_rx_pool (dev, pool);
1293 }
Daniel Walkereff0dee542008-04-29 03:39:29 -07001294 mutex_unlock(&dev->vcc_sf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001295 }
1296
1297 // free our structure
1298 kfree (vcc);
1299
1300 // say the VPI/VCI is free again
1301 clear_bit(ATM_VF_ADDR,&atm_vcc->flags);
1302
1303 return;
1304}
1305
Linus Torvalds1da177e2005-04-16 15:20:36 -07001306/********** Send **********/
1307
1308static int amb_send (struct atm_vcc * atm_vcc, struct sk_buff * skb) {
1309 amb_dev * dev = AMB_DEV(atm_vcc->dev);
1310 amb_vcc * vcc = AMB_VCC(atm_vcc);
1311 u16 vc = atm_vcc->vci;
1312 unsigned int tx_len = skb->len;
1313 unsigned char * tx_data = skb->data;
1314 tx_simple * tx_descr;
1315 tx_in tx;
1316
1317 if (test_bit (dead, &dev->flags))
1318 return -EIO;
1319
1320 PRINTD (DBG_FLOW|DBG_TX, "amb_send vc %x data %p len %u",
1321 vc, tx_data, tx_len);
1322
1323 dump_skb (">>>", vc, skb);
1324
1325 if (!dev->txer[vc].tx_present) {
1326 PRINTK (KERN_ERR, "attempt to send on RX-only VC %x", vc);
1327 return -EBADFD;
1328 }
1329
1330 // this is a driver private field so we have to set it ourselves,
1331 // despite the fact that we are _required_ to use it to check for a
1332 // pop function
1333 ATM_SKB(skb)->vcc = atm_vcc;
1334
1335 if (skb->len > (size_t) atm_vcc->qos.txtp.max_sdu) {
1336 PRINTK (KERN_ERR, "sk_buff length greater than agreed max_sdu, dropping...");
1337 return -EIO;
1338 }
1339
1340 if (check_area (skb->data, skb->len)) {
1341 atomic_inc(&atm_vcc->stats->tx_err);
1342 return -ENOMEM; // ?
1343 }
1344
1345 // allocate memory for fragments
1346 tx_descr = kmalloc (sizeof(tx_simple), GFP_KERNEL);
1347 if (!tx_descr) {
1348 PRINTK (KERN_ERR, "could not allocate TX descriptor");
1349 return -ENOMEM;
1350 }
1351 if (check_area (tx_descr, sizeof(tx_simple))) {
1352 kfree (tx_descr);
1353 return -ENOMEM;
1354 }
1355 PRINTD (DBG_TX, "fragment list allocated at %p", tx_descr);
1356
1357 tx_descr->skb = skb;
1358
1359 tx_descr->tx_frag.bytes = cpu_to_be32 (tx_len);
1360 tx_descr->tx_frag.address = cpu_to_be32 (virt_to_bus (tx_data));
1361
1362 tx_descr->tx_frag_end.handle = virt_to_bus (tx_descr);
1363 tx_descr->tx_frag_end.vc = 0;
1364 tx_descr->tx_frag_end.next_descriptor_length = 0;
1365 tx_descr->tx_frag_end.next_descriptor = 0;
1366#ifdef AMB_NEW_MICROCODE
1367 tx_descr->tx_frag_end.cpcs_uu = 0;
1368 tx_descr->tx_frag_end.cpi = 0;
1369 tx_descr->tx_frag_end.pad = 0;
1370#endif
1371
1372 tx.vc = cpu_to_be16 (vcc->tx_frame_bits | vc);
1373 tx.tx_descr_length = cpu_to_be16 (sizeof(tx_frag)+sizeof(tx_frag_end));
1374 tx.tx_descr_addr = cpu_to_be32 (virt_to_bus (&tx_descr->tx_frag));
1375
1376 while (tx_give (dev, &tx))
1377 schedule();
1378 return 0;
1379}
1380
1381/********** Change QoS on a VC **********/
1382
1383// int amb_change_qos (struct atm_vcc * atm_vcc, struct atm_qos * qos, int flags);
1384
1385/********** Free RX Socket Buffer **********/
1386
1387#if 0
1388static void amb_free_rx_skb (struct atm_vcc * atm_vcc, struct sk_buff * skb) {
1389 amb_dev * dev = AMB_DEV (atm_vcc->dev);
1390 amb_vcc * vcc = AMB_VCC (atm_vcc);
1391 unsigned char pool = vcc->rx_info.pool;
1392 rx_in rx;
1393
1394 // This may be unsafe for various reasons that I cannot really guess
1395 // at. However, I note that the ATM layer calls kfree_skb rather
1396 // than dev_kfree_skb at this point so we are least covered as far
1397 // as buffer locking goes. There may be bugs if pcap clones RX skbs.
1398
1399 PRINTD (DBG_FLOW|DBG_SKB, "amb_rx_free skb %p (atm_vcc %p, vcc %p)",
1400 skb, atm_vcc, vcc);
1401
1402 rx.handle = virt_to_bus (skb);
1403 rx.host_address = cpu_to_be32 (virt_to_bus (skb->data));
1404
1405 skb->data = skb->head;
1406 skb->tail = skb->head;
1407 skb->len = 0;
1408
1409 if (!rx_give (dev, &rx, pool)) {
1410 // success
1411 PRINTD (DBG_SKB|DBG_POOL, "recycled skb for pool %hu", pool);
1412 return;
1413 }
1414
1415 // just do what the ATM layer would have done
1416 dev_kfree_skb_any (skb);
1417
1418 return;
1419}
1420#endif
1421
1422/********** Proc File Output **********/
1423
1424static int amb_proc_read (struct atm_dev * atm_dev, loff_t * pos, char * page) {
1425 amb_dev * dev = AMB_DEV (atm_dev);
1426 int left = *pos;
1427 unsigned char pool;
1428
1429 PRINTD (DBG_FLOW, "amb_proc_read");
1430
1431 /* more diagnostics here? */
1432
1433 if (!left--) {
1434 amb_stats * s = &dev->stats;
1435 return sprintf (page,
1436 "frames: TX OK %lu, RX OK %lu, RX bad %lu "
1437 "(CRC %lu, long %lu, aborted %lu, unused %lu).\n",
1438 s->tx_ok, s->rx.ok, s->rx.error,
1439 s->rx.badcrc, s->rx.toolong,
1440 s->rx.aborted, s->rx.unused);
1441 }
1442
1443 if (!left--) {
1444 amb_cq * c = &dev->cq;
1445 return sprintf (page, "cmd queue [cur/hi/max]: %u/%u/%u. ",
1446 c->pending, c->high, c->maximum);
1447 }
1448
1449 if (!left--) {
1450 amb_txq * t = &dev->txq;
1451 return sprintf (page, "TX queue [cur/max high full]: %u/%u %u %u.\n",
1452 t->pending, t->maximum, t->high, t->filled);
1453 }
1454
1455 if (!left--) {
1456 unsigned int count = sprintf (page, "RX queues [cur/max/req low empty]:");
1457 for (pool = 0; pool < NUM_RX_POOLS; ++pool) {
1458 amb_rxq * r = &dev->rxq[pool];
1459 count += sprintf (page+count, " %u/%u/%u %u %u",
1460 r->pending, r->maximum, r->buffers_wanted, r->low, r->emptied);
1461 }
1462 count += sprintf (page+count, ".\n");
1463 return count;
1464 }
1465
1466 if (!left--) {
1467 unsigned int count = sprintf (page, "RX buffer sizes:");
1468 for (pool = 0; pool < NUM_RX_POOLS; ++pool) {
1469 amb_rxq * r = &dev->rxq[pool];
1470 count += sprintf (page+count, " %u", r->buffer_size);
1471 }
1472 count += sprintf (page+count, ".\n");
1473 return count;
1474 }
1475
1476#if 0
1477 if (!left--) {
1478 // suni block etc?
1479 }
1480#endif
1481
1482 return 0;
1483}
1484
1485/********** Operation Structure **********/
1486
1487static const struct atmdev_ops amb_ops = {
1488 .open = amb_open,
1489 .close = amb_close,
1490 .send = amb_send,
1491 .proc_read = amb_proc_read,
1492 .owner = THIS_MODULE,
1493};
1494
1495/********** housekeeping **********/
1496static void do_housekeeping (unsigned long arg) {
1497 amb_dev * dev = (amb_dev *) arg;
1498
1499 // could collect device-specific (not driver/atm-linux) stats here
1500
1501 // last resort refill once every ten seconds
1502 fill_rx_pools (dev);
1503 mod_timer(&dev->housekeeping, jiffies + 10*HZ);
1504
1505 return;
1506}
1507
1508/********** creation of communication queues **********/
1509
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08001510static int create_queues(amb_dev *dev, unsigned int cmds, unsigned int txs,
1511 unsigned int *rxs, unsigned int *rx_buffer_sizes)
1512{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001513 unsigned char pool;
1514 size_t total = 0;
1515 void * memory;
1516 void * limit;
1517
1518 PRINTD (DBG_FLOW, "create_queues %p", dev);
1519
1520 total += cmds * sizeof(command);
1521
1522 total += txs * (sizeof(tx_in) + sizeof(tx_out));
1523
1524 for (pool = 0; pool < NUM_RX_POOLS; ++pool)
1525 total += rxs[pool] * (sizeof(rx_in) + sizeof(rx_out));
1526
1527 memory = kmalloc (total, GFP_KERNEL);
1528 if (!memory) {
1529 PRINTK (KERN_ERR, "could not allocate queues");
1530 return -ENOMEM;
1531 }
1532 if (check_area (memory, total)) {
1533 PRINTK (KERN_ERR, "queues allocated in nasty area");
1534 kfree (memory);
1535 return -ENOMEM;
1536 }
1537
1538 limit = memory + total;
1539 PRINTD (DBG_INIT, "queues from %p to %p", memory, limit);
1540
1541 PRINTD (DBG_CMD, "command queue at %p", memory);
1542
1543 {
1544 command * cmd = memory;
1545 amb_cq * cq = &dev->cq;
1546
1547 cq->pending = 0;
1548 cq->high = 0;
1549 cq->maximum = cmds - 1;
1550
1551 cq->ptrs.start = cmd;
1552 cq->ptrs.in = cmd;
1553 cq->ptrs.out = cmd;
1554 cq->ptrs.limit = cmd + cmds;
1555
1556 memory = cq->ptrs.limit;
1557 }
1558
1559 PRINTD (DBG_TX, "TX queue pair at %p", memory);
1560
1561 {
1562 tx_in * in = memory;
1563 tx_out * out;
1564 amb_txq * txq = &dev->txq;
1565
1566 txq->pending = 0;
1567 txq->high = 0;
1568 txq->filled = 0;
1569 txq->maximum = txs - 1;
1570
1571 txq->in.start = in;
1572 txq->in.ptr = in;
1573 txq->in.limit = in + txs;
1574
1575 memory = txq->in.limit;
1576 out = memory;
1577
1578 txq->out.start = out;
1579 txq->out.ptr = out;
1580 txq->out.limit = out + txs;
1581
1582 memory = txq->out.limit;
1583 }
1584
1585 PRINTD (DBG_RX, "RX queue pairs at %p", memory);
1586
1587 for (pool = 0; pool < NUM_RX_POOLS; ++pool) {
1588 rx_in * in = memory;
1589 rx_out * out;
1590 amb_rxq * rxq = &dev->rxq[pool];
1591
1592 rxq->buffer_size = rx_buffer_sizes[pool];
1593 rxq->buffers_wanted = 0;
1594
1595 rxq->pending = 0;
1596 rxq->low = rxs[pool] - 1;
1597 rxq->emptied = 0;
1598 rxq->maximum = rxs[pool] - 1;
1599
1600 rxq->in.start = in;
1601 rxq->in.ptr = in;
1602 rxq->in.limit = in + rxs[pool];
1603
1604 memory = rxq->in.limit;
1605 out = memory;
1606
1607 rxq->out.start = out;
1608 rxq->out.ptr = out;
1609 rxq->out.limit = out + rxs[pool];
1610
1611 memory = rxq->out.limit;
1612 }
1613
1614 if (memory == limit) {
1615 return 0;
1616 } else {
1617 PRINTK (KERN_ERR, "bad queue alloc %p != %p (tell maintainer)", memory, limit);
1618 kfree (limit - total);
1619 return -ENOMEM;
1620 }
1621
1622}
1623
1624/********** destruction of communication queues **********/
1625
1626static void destroy_queues (amb_dev * dev) {
1627 // all queues assumed empty
1628 void * memory = dev->cq.ptrs.start;
1629 // includes txq.in, txq.out, rxq[].in and rxq[].out
1630
1631 PRINTD (DBG_FLOW, "destroy_queues %p", dev);
1632
1633 PRINTD (DBG_INIT, "freeing queues at %p", memory);
1634 kfree (memory);
1635
1636 return;
1637}
1638
1639/********** basic loader commands and error handling **********/
1640// centisecond timeouts - guessing away here
1641static unsigned int command_timeouts [] = {
1642 [host_memory_test] = 15,
1643 [read_adapter_memory] = 2,
1644 [write_adapter_memory] = 2,
1645 [adapter_start] = 50,
1646 [get_version_number] = 10,
1647 [interrupt_host] = 1,
1648 [flash_erase_sector] = 1,
1649 [adap_download_block] = 1,
1650 [adap_erase_flash] = 1,
1651 [adap_run_in_iram] = 1,
1652 [adap_end_download] = 1
1653};
1654
1655
1656static unsigned int command_successes [] = {
1657 [host_memory_test] = COMMAND_PASSED_TEST,
1658 [read_adapter_memory] = COMMAND_READ_DATA_OK,
1659 [write_adapter_memory] = COMMAND_WRITE_DATA_OK,
1660 [adapter_start] = COMMAND_COMPLETE,
1661 [get_version_number] = COMMAND_COMPLETE,
1662 [interrupt_host] = COMMAND_COMPLETE,
1663 [flash_erase_sector] = COMMAND_COMPLETE,
1664 [adap_download_block] = COMMAND_COMPLETE,
1665 [adap_erase_flash] = COMMAND_COMPLETE,
1666 [adap_run_in_iram] = COMMAND_COMPLETE,
1667 [adap_end_download] = COMMAND_COMPLETE
1668};
1669
1670static int decode_loader_result (loader_command cmd, u32 result)
1671{
1672 int res;
1673 const char *msg;
1674
1675 if (result == command_successes[cmd])
1676 return 0;
1677
1678 switch (result) {
1679 case BAD_COMMAND:
1680 res = -EINVAL;
1681 msg = "bad command";
1682 break;
1683 case COMMAND_IN_PROGRESS:
1684 res = -ETIMEDOUT;
1685 msg = "command in progress";
1686 break;
1687 case COMMAND_PASSED_TEST:
1688 res = 0;
1689 msg = "command passed test";
1690 break;
1691 case COMMAND_FAILED_TEST:
1692 res = -EIO;
1693 msg = "command failed test";
1694 break;
1695 case COMMAND_READ_DATA_OK:
1696 res = 0;
1697 msg = "command read data ok";
1698 break;
1699 case COMMAND_READ_BAD_ADDRESS:
1700 res = -EINVAL;
1701 msg = "command read bad address";
1702 break;
1703 case COMMAND_WRITE_DATA_OK:
1704 res = 0;
1705 msg = "command write data ok";
1706 break;
1707 case COMMAND_WRITE_BAD_ADDRESS:
1708 res = -EINVAL;
1709 msg = "command write bad address";
1710 break;
1711 case COMMAND_WRITE_FLASH_FAILURE:
1712 res = -EIO;
1713 msg = "command write flash failure";
1714 break;
1715 case COMMAND_COMPLETE:
1716 res = 0;
1717 msg = "command complete";
1718 break;
1719 case COMMAND_FLASH_ERASE_FAILURE:
1720 res = -EIO;
1721 msg = "command flash erase failure";
1722 break;
1723 case COMMAND_WRITE_BAD_DATA:
1724 res = -EINVAL;
1725 msg = "command write bad data";
1726 break;
1727 default:
1728 res = -EINVAL;
1729 msg = "unknown error";
1730 PRINTD (DBG_LOAD|DBG_ERR,
1731 "decode_loader_result got %d=%x !",
1732 result, result);
1733 break;
1734 }
1735
1736 PRINTK (KERN_ERR, "%s", msg);
1737 return res;
1738}
1739
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08001740static int do_loader_command(volatile loader_block *lb, const amb_dev *dev,
1741 loader_command cmd)
1742{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001743
1744 unsigned long timeout;
1745
1746 PRINTD (DBG_FLOW|DBG_LOAD, "do_loader_command");
1747
1748 /* do a command
1749
1750 Set the return value to zero, set the command type and set the
1751 valid entry to the right magic value. The payload is already
1752 correctly byte-ordered so we leave it alone. Hit the doorbell
1753 with the bus address of this structure.
1754
1755 */
1756
1757 lb->result = 0;
1758 lb->command = cpu_to_be32 (cmd);
1759 lb->valid = cpu_to_be32 (DMA_VALID);
1760 // dump_registers (dev);
1761 // dump_loader_block (lb);
1762 wr_mem (dev, offsetof(amb_mem, doorbell), virt_to_bus (lb) & ~onegigmask);
1763
1764 timeout = command_timeouts[cmd] * 10;
1765
1766 while (!lb->result || lb->result == cpu_to_be32 (COMMAND_IN_PROGRESS))
1767 if (timeout) {
1768 timeout = msleep_interruptible(timeout);
1769 } else {
1770 PRINTD (DBG_LOAD|DBG_ERR, "command %d timed out", cmd);
1771 dump_registers (dev);
1772 dump_loader_block (lb);
1773 return -ETIMEDOUT;
1774 }
1775
1776 if (cmd == adapter_start) {
1777 // wait for start command to acknowledge...
1778 timeout = 100;
1779 while (rd_plain (dev, offsetof(amb_mem, doorbell)))
1780 if (timeout) {
1781 timeout = msleep_interruptible(timeout);
1782 } else {
1783 PRINTD (DBG_LOAD|DBG_ERR, "start command did not clear doorbell, res=%08x",
1784 be32_to_cpu (lb->result));
1785 dump_registers (dev);
1786 return -ETIMEDOUT;
1787 }
1788 return 0;
1789 } else {
1790 return decode_loader_result (cmd, be32_to_cpu (lb->result));
1791 }
1792
1793}
1794
1795/* loader: determine loader version */
1796
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08001797static int get_loader_version(loader_block *lb, const amb_dev *dev,
1798 u32 *version)
1799{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001800 int res;
1801
1802 PRINTD (DBG_FLOW|DBG_LOAD, "get_loader_version");
1803
1804 res = do_loader_command (lb, dev, get_version_number);
1805 if (res)
1806 return res;
1807 if (version)
1808 *version = be32_to_cpu (lb->payload.version);
1809 return 0;
1810}
1811
1812/* loader: write memory data blocks */
1813
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08001814static int loader_write(loader_block *lb, const amb_dev *dev,
1815 const struct ihex_binrec *rec)
1816{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001817 transfer_block * tb = &lb->payload.transfer;
1818
1819 PRINTD (DBG_FLOW|DBG_LOAD, "loader_write");
David Woodhouse27d202f2008-06-05 12:59:51 +01001820
1821 tb->address = rec->addr;
1822 tb->count = cpu_to_be32(be16_to_cpu(rec->len) / 4);
1823 memcpy(tb->data, rec->data, be16_to_cpu(rec->len));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001824 return do_loader_command (lb, dev, write_adapter_memory);
1825}
1826
1827/* loader: verify memory data blocks */
1828
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08001829static int loader_verify(loader_block *lb, const amb_dev *dev,
1830 const struct ihex_binrec *rec)
1831{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001832 transfer_block * tb = &lb->payload.transfer;
1833 int res;
1834
1835 PRINTD (DBG_FLOW|DBG_LOAD, "loader_verify");
1836
David Woodhouse27d202f2008-06-05 12:59:51 +01001837 tb->address = rec->addr;
1838 tb->count = cpu_to_be32(be16_to_cpu(rec->len) / 4);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001839 res = do_loader_command (lb, dev, read_adapter_memory);
David Woodhouse27d202f2008-06-05 12:59:51 +01001840 if (!res && memcmp(tb->data, rec->data, be16_to_cpu(rec->len)))
1841 res = -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001842 return res;
1843}
1844
1845/* loader: start microcode */
1846
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08001847static int loader_start(loader_block *lb, const amb_dev *dev, u32 address)
1848{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001849 PRINTD (DBG_FLOW|DBG_LOAD, "loader_start");
1850
1851 lb->payload.start = cpu_to_be32 (address);
1852 return do_loader_command (lb, dev, adapter_start);
1853}
1854
1855/********** reset card **********/
1856
1857static inline void sf (const char * msg)
1858{
1859 PRINTK (KERN_ERR, "self-test failed: %s", msg);
1860}
1861
1862static int amb_reset (amb_dev * dev, int diags) {
1863 u32 word;
1864
1865 PRINTD (DBG_FLOW|DBG_LOAD, "amb_reset");
1866
1867 word = rd_plain (dev, offsetof(amb_mem, reset_control));
1868 // put card into reset state
1869 wr_plain (dev, offsetof(amb_mem, reset_control), word | AMB_RESET_BITS);
1870 // wait a short while
1871 udelay (10);
1872#if 1
1873 // put card into known good state
1874 wr_plain (dev, offsetof(amb_mem, interrupt_control), AMB_DOORBELL_BITS);
1875 // clear all interrupts just in case
1876 wr_plain (dev, offsetof(amb_mem, interrupt), -1);
1877#endif
1878 // clear self-test done flag
1879 wr_plain (dev, offsetof(amb_mem, mb.loader.ready), 0);
1880 // take card out of reset state
1881 wr_plain (dev, offsetof(amb_mem, reset_control), word &~ AMB_RESET_BITS);
1882
1883 if (diags) {
1884 unsigned long timeout;
1885 // 4.2 second wait
1886 msleep(4200);
1887 // half second time-out
1888 timeout = 500;
1889 while (!rd_plain (dev, offsetof(amb_mem, mb.loader.ready)))
1890 if (timeout) {
1891 timeout = msleep_interruptible(timeout);
1892 } else {
1893 PRINTD (DBG_LOAD|DBG_ERR, "reset timed out");
1894 return -ETIMEDOUT;
1895 }
1896
1897 // get results of self-test
1898 // XXX double check byte-order
1899 word = rd_mem (dev, offsetof(amb_mem, mb.loader.result));
1900 if (word & SELF_TEST_FAILURE) {
1901 if (word & GPINT_TST_FAILURE)
1902 sf ("interrupt");
1903 if (word & SUNI_DATA_PATTERN_FAILURE)
1904 sf ("SUNI data pattern");
1905 if (word & SUNI_DATA_BITS_FAILURE)
1906 sf ("SUNI data bits");
1907 if (word & SUNI_UTOPIA_FAILURE)
1908 sf ("SUNI UTOPIA interface");
1909 if (word & SUNI_FIFO_FAILURE)
1910 sf ("SUNI cell buffer FIFO");
1911 if (word & SRAM_FAILURE)
1912 sf ("bad SRAM");
1913 // better return value?
1914 return -EIO;
1915 }
1916
1917 }
1918 return 0;
1919}
1920
1921/********** transfer and start the microcode **********/
1922
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08001923static int ucode_init(loader_block *lb, amb_dev *dev)
1924{
David Woodhouse27d202f2008-06-05 12:59:51 +01001925 const struct firmware *fw;
1926 unsigned long start_address;
1927 const struct ihex_binrec *rec;
Jesper Juhl6a75da42011-01-09 11:32:38 +00001928 const char *errmsg = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001929 int res;
Jesper Juhl6a75da42011-01-09 11:32:38 +00001930
David Woodhouse27d202f2008-06-05 12:59:51 +01001931 res = request_ihex_firmware(&fw, "atmsar11.fw", &dev->pci_dev->dev);
1932 if (res) {
1933 PRINTK (KERN_ERR, "Cannot load microcode data");
1934 return res;
1935 }
1936
1937 /* First record contains just the start address */
1938 rec = (const struct ihex_binrec *)fw->data;
1939 if (be16_to_cpu(rec->len) != sizeof(__be32) || be32_to_cpu(rec->addr)) {
Jesper Juhl6a75da42011-01-09 11:32:38 +00001940 errmsg = "no start record";
1941 goto fail;
David Woodhouse27d202f2008-06-05 12:59:51 +01001942 }
1943 start_address = be32_to_cpup((__be32 *)rec->data);
1944
1945 rec = ihex_next_binrec(rec);
1946
Linus Torvalds1da177e2005-04-16 15:20:36 -07001947 PRINTD (DBG_FLOW|DBG_LOAD, "ucode_init");
David Woodhouse27d202f2008-06-05 12:59:51 +01001948
1949 while (rec) {
1950 PRINTD (DBG_LOAD, "starting region (%x, %u)", be32_to_cpu(rec->addr),
1951 be16_to_cpu(rec->len));
1952 if (be16_to_cpu(rec->len) > 4 * MAX_TRANSFER_DATA) {
Jesper Juhl6a75da42011-01-09 11:32:38 +00001953 errmsg = "record too long";
1954 goto fail;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001955 }
David Woodhouse27d202f2008-06-05 12:59:51 +01001956 if (be16_to_cpu(rec->len) & 3) {
Jesper Juhl6a75da42011-01-09 11:32:38 +00001957 errmsg = "odd number of bytes";
1958 goto fail;
David Woodhouse27d202f2008-06-05 12:59:51 +01001959 }
1960 res = loader_write(lb, dev, rec);
1961 if (res)
1962 break;
1963
1964 res = loader_verify(lb, dev, rec);
1965 if (res)
1966 break;
Dan Carpenterfcdc90b2012-11-27 07:29:35 +00001967 rec = ihex_next_binrec(rec);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001968 }
David Woodhouse27d202f2008-06-05 12:59:51 +01001969 release_firmware(fw);
1970 if (!res)
1971 res = loader_start(lb, dev, start_address);
1972
1973 return res;
Jesper Juhl6a75da42011-01-09 11:32:38 +00001974fail:
1975 release_firmware(fw);
1976 PRINTK(KERN_ERR, "Bad microcode data (%s)", errmsg);
1977 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001978}
1979
1980/********** give adapter parameters **********/
1981
1982static inline __be32 bus_addr(void * addr) {
1983 return cpu_to_be32 (virt_to_bus (addr));
1984}
1985
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08001986static int amb_talk(amb_dev *dev)
1987{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001988 adap_talk_block a;
1989 unsigned char pool;
1990 unsigned long timeout;
1991
1992 PRINTD (DBG_FLOW, "amb_talk %p", dev);
1993
1994 a.command_start = bus_addr (dev->cq.ptrs.start);
1995 a.command_end = bus_addr (dev->cq.ptrs.limit);
1996 a.tx_start = bus_addr (dev->txq.in.start);
1997 a.tx_end = bus_addr (dev->txq.in.limit);
1998 a.txcom_start = bus_addr (dev->txq.out.start);
1999 a.txcom_end = bus_addr (dev->txq.out.limit);
2000
2001 for (pool = 0; pool < NUM_RX_POOLS; ++pool) {
2002 // the other "a" items are set up by the adapter
2003 a.rec_struct[pool].buffer_start = bus_addr (dev->rxq[pool].in.start);
2004 a.rec_struct[pool].buffer_end = bus_addr (dev->rxq[pool].in.limit);
2005 a.rec_struct[pool].rx_start = bus_addr (dev->rxq[pool].out.start);
2006 a.rec_struct[pool].rx_end = bus_addr (dev->rxq[pool].out.limit);
2007 a.rec_struct[pool].buffer_size = cpu_to_be32 (dev->rxq[pool].buffer_size);
2008 }
2009
2010#ifdef AMB_NEW_MICROCODE
2011 // disable fast PLX prefetching
2012 a.init_flags = 0;
2013#endif
2014
2015 // pass the structure
2016 wr_mem (dev, offsetof(amb_mem, doorbell), virt_to_bus (&a));
2017
2018 // 2.2 second wait (must not touch doorbell during 2 second DMA test)
2019 msleep(2200);
2020 // give the adapter another half second?
2021 timeout = 500;
2022 while (rd_plain (dev, offsetof(amb_mem, doorbell)))
2023 if (timeout) {
2024 timeout = msleep_interruptible(timeout);
2025 } else {
2026 PRINTD (DBG_INIT|DBG_ERR, "adapter init timed out");
2027 return -ETIMEDOUT;
2028 }
2029
2030 return 0;
2031}
2032
2033// get microcode version
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08002034static void amb_ucode_version(amb_dev *dev)
2035{
Linus Torvalds1da177e2005-04-16 15:20:36 -07002036 u32 major;
2037 u32 minor;
2038 command cmd;
2039 cmd.request = cpu_to_be32 (SRB_GET_VERSION);
2040 while (command_do (dev, &cmd)) {
2041 set_current_state(TASK_UNINTERRUPTIBLE);
2042 schedule();
2043 }
2044 major = be32_to_cpu (cmd.args.version.major);
2045 minor = be32_to_cpu (cmd.args.version.minor);
2046 PRINTK (KERN_INFO, "microcode version is %u.%u", major, minor);
2047}
2048
Linus Torvalds1da177e2005-04-16 15:20:36 -07002049// get end station address
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08002050static void amb_esi(amb_dev *dev, u8 *esi)
2051{
Linus Torvalds1da177e2005-04-16 15:20:36 -07002052 u32 lower4;
2053 u16 upper2;
2054 command cmd;
2055
2056 cmd.request = cpu_to_be32 (SRB_GET_BIA);
2057 while (command_do (dev, &cmd)) {
2058 set_current_state(TASK_UNINTERRUPTIBLE);
2059 schedule();
2060 }
2061 lower4 = be32_to_cpu (cmd.args.bia.lower4);
2062 upper2 = be32_to_cpu (cmd.args.bia.upper2);
2063 PRINTD (DBG_LOAD, "BIA: lower4: %08x, upper2 %04x", lower4, upper2);
2064
2065 if (esi) {
2066 unsigned int i;
2067
2068 PRINTDB (DBG_INIT, "ESI:");
2069 for (i = 0; i < ESI_LEN; ++i) {
2070 if (i < 4)
Akinobu Mita0a858852006-12-08 02:36:28 -08002071 esi[i] = bitrev8(lower4>>(8*i));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002072 else
Akinobu Mita0a858852006-12-08 02:36:28 -08002073 esi[i] = bitrev8(upper2>>(8*(i-4)));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002074 PRINTDM (DBG_INIT, " %02x", esi[i]);
2075 }
2076
2077 PRINTDE (DBG_INIT, "");
2078 }
2079
2080 return;
2081}
2082
2083static void fixup_plx_window (amb_dev *dev, loader_block *lb)
2084{
2085 // fix up the PLX-mapped window base address to match the block
2086 unsigned long blb;
2087 u32 mapreg;
2088 blb = virt_to_bus(lb);
2089 // the kernel stack had better not ever cross a 1Gb boundary!
2090 mapreg = rd_plain (dev, offsetof(amb_mem, stuff[10]));
2091 mapreg &= ~onegigmask;
2092 mapreg |= blb & onegigmask;
2093 wr_plain (dev, offsetof(amb_mem, stuff[10]), mapreg);
2094 return;
2095}
2096
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08002097static int amb_init(amb_dev *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002098{
2099 loader_block lb;
2100
2101 u32 version;
2102
2103 if (amb_reset (dev, 1)) {
2104 PRINTK (KERN_ERR, "card reset failed!");
2105 } else {
2106 fixup_plx_window (dev, &lb);
2107
2108 if (get_loader_version (&lb, dev, &version)) {
2109 PRINTK (KERN_INFO, "failed to get loader version");
2110 } else {
2111 PRINTK (KERN_INFO, "loader version is %08x", version);
2112
2113 if (ucode_init (&lb, dev)) {
2114 PRINTK (KERN_ERR, "microcode failure");
2115 } else if (create_queues (dev, cmds, txs, rxs, rxs_bs)) {
2116 PRINTK (KERN_ERR, "failed to get memory for queues");
2117 } else {
2118
2119 if (amb_talk (dev)) {
2120 PRINTK (KERN_ERR, "adapter did not accept queues");
2121 } else {
2122
2123 amb_ucode_version (dev);
2124 return 0;
2125
2126 } /* amb_talk */
2127
2128 destroy_queues (dev);
2129 } /* create_queues, ucode_init */
2130
2131 amb_reset (dev, 0);
2132 } /* get_loader_version */
2133
2134 } /* amb_reset */
2135
2136 return -EINVAL;
2137}
2138
2139static void setup_dev(amb_dev *dev, struct pci_dev *pci_dev)
2140{
2141 unsigned char pool;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002142
2143 // set up known dev items straight away
2144 dev->pci_dev = pci_dev;
2145 pci_set_drvdata(pci_dev, dev);
2146
2147 dev->iobase = pci_resource_start (pci_dev, 1);
2148 dev->irq = pci_dev->irq;
2149 dev->membase = bus_to_virt(pci_resource_start(pci_dev, 0));
2150
2151 // flags (currently only dead)
2152 dev->flags = 0;
2153
2154 // Allocate cell rates (fibre)
2155 // ATM_OC3_PCR = 1555200000/8/270*260/53 - 29/53
2156 // to be really pedantic, this should be ATM_OC3c_PCR
2157 dev->tx_avail = ATM_OC3_PCR;
2158 dev->rx_avail = ATM_OC3_PCR;
2159
Linus Torvalds1da177e2005-04-16 15:20:36 -07002160 // semaphore for txer/rxer modifications - we cannot use a
2161 // spinlock as the critical region needs to switch processes
Daniel Walkereff0dee542008-04-29 03:39:29 -07002162 mutex_init(&dev->vcc_sf);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002163 // queue manipulation spinlocks; we want atomic reads and
2164 // writes to the queue descriptors (handles IRQ and SMP)
2165 // consider replacing "int pending" -> "atomic_t available"
2166 // => problem related to who gets to move queue pointers
2167 spin_lock_init (&dev->cq.lock);
2168 spin_lock_init (&dev->txq.lock);
2169 for (pool = 0; pool < NUM_RX_POOLS; ++pool)
2170 spin_lock_init (&dev->rxq[pool].lock);
2171}
2172
2173static void setup_pci_dev(struct pci_dev *pci_dev)
2174{
2175 unsigned char lat;
2176
2177 // enable bus master accesses
2178 pci_set_master(pci_dev);
2179
2180 // frobnicate latency (upwards, usually)
2181 pci_read_config_byte (pci_dev, PCI_LATENCY_TIMER, &lat);
2182
2183 if (!pci_lat)
2184 pci_lat = (lat < MIN_PCI_LATENCY) ? MIN_PCI_LATENCY : lat;
2185
2186 if (lat != pci_lat) {
2187 PRINTK (KERN_INFO, "Changing PCI latency timer from %hu to %hu",
2188 lat, pci_lat);
2189 pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, pci_lat);
2190 }
2191}
2192
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08002193static int amb_probe(struct pci_dev *pci_dev,
2194 const struct pci_device_id *pci_ent)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002195{
2196 amb_dev * dev;
2197 int err;
2198 unsigned int irq;
2199
2200 err = pci_enable_device(pci_dev);
2201 if (err < 0) {
2202 PRINTK (KERN_ERR, "skipped broken (PLX rev 2) card");
2203 goto out;
2204 }
2205
2206 // read resources from PCI configuration space
2207 irq = pci_dev->irq;
2208
2209 if (pci_dev->device == PCI_DEVICE_ID_MADGE_AMBASSADOR_BAD) {
2210 PRINTK (KERN_ERR, "skipped broken (PLX rev 2) card");
2211 err = -EINVAL;
2212 goto out_disable;
2213 }
2214
2215 PRINTD (DBG_INFO, "found Madge ATM adapter (amb) at"
Greg Kroah-Hartmane29419f2006-06-12 15:20:16 -07002216 " IO %llx, IRQ %u, MEM %p",
2217 (unsigned long long)pci_resource_start(pci_dev, 1),
Linus Torvalds1da177e2005-04-16 15:20:36 -07002218 irq, bus_to_virt(pci_resource_start(pci_dev, 0)));
2219
2220 // check IO region
2221 err = pci_request_region(pci_dev, 1, DEV_LABEL);
2222 if (err < 0) {
2223 PRINTK (KERN_ERR, "IO range already in use!");
2224 goto out_disable;
2225 }
2226
Joonwoo Parka5929af2007-12-30 23:19:26 -08002227 dev = kzalloc(sizeof(amb_dev), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002228 if (!dev) {
2229 PRINTK (KERN_ERR, "out of memory!");
2230 err = -ENOMEM;
2231 goto out_release;
2232 }
2233
2234 setup_dev(dev, pci_dev);
2235
2236 err = amb_init(dev);
2237 if (err < 0) {
2238 PRINTK (KERN_ERR, "adapter initialisation failure");
2239 goto out_free;
2240 }
2241
2242 setup_pci_dev(pci_dev);
2243
2244 // grab (but share) IRQ and install handler
Thomas Gleixnerdace1452006-07-01 19:29:38 -07002245 err = request_irq(irq, interrupt_handler, IRQF_SHARED, DEV_LABEL, dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002246 if (err < 0) {
2247 PRINTK (KERN_ERR, "request IRQ failed!");
2248 goto out_reset;
2249 }
2250
Dan Williamsd9ca6762010-12-08 19:40:47 +00002251 dev->atm_dev = atm_dev_register (DEV_LABEL, &pci_dev->dev, &amb_ops, -1,
2252 NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002253 if (!dev->atm_dev) {
2254 PRINTD (DBG_ERR, "failed to register Madge ATM adapter");
2255 err = -EINVAL;
2256 goto out_free_irq;
2257 }
2258
2259 PRINTD (DBG_INFO, "registered Madge ATM adapter (no. %d) (%p) at %p",
2260 dev->atm_dev->number, dev, dev->atm_dev);
2261 dev->atm_dev->dev_data = (void *) dev;
2262
2263 // register our address
2264 amb_esi (dev, dev->atm_dev->esi);
2265
2266 // 0 bits for vpi, 10 bits for vci
2267 dev->atm_dev->ci_range.vpi_bits = NUM_VPI_BITS;
2268 dev->atm_dev->ci_range.vci_bits = NUM_VCI_BITS;
2269
2270 init_timer(&dev->housekeeping);
2271 dev->housekeeping.function = do_housekeeping;
2272 dev->housekeeping.data = (unsigned long) dev;
2273 mod_timer(&dev->housekeeping, jiffies);
2274
2275 // enable host interrupts
2276 interrupts_on (dev);
2277
2278out:
2279 return err;
2280
2281out_free_irq:
2282 free_irq(irq, dev);
2283out_reset:
2284 amb_reset(dev, 0);
2285out_free:
2286 kfree(dev);
2287out_release:
2288 pci_release_region(pci_dev, 1);
2289out_disable:
2290 pci_disable_device(pci_dev);
2291 goto out;
2292}
2293
2294
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08002295static void amb_remove_one(struct pci_dev *pci_dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002296{
2297 struct amb_dev *dev;
2298
2299 dev = pci_get_drvdata(pci_dev);
2300
2301 PRINTD(DBG_INFO|DBG_INIT, "closing %p (atm_dev = %p)", dev, dev->atm_dev);
2302 del_timer_sync(&dev->housekeeping);
2303 // the drain should not be necessary
2304 drain_rx_pools(dev);
2305 interrupts_off(dev);
2306 amb_reset(dev, 0);
2307 free_irq(dev->irq, dev);
2308 pci_disable_device(pci_dev);
2309 destroy_queues(dev);
2310 atm_dev_deregister(dev->atm_dev);
2311 kfree(dev);
2312 pci_release_region(pci_dev, 1);
2313}
2314
2315static void __init amb_check_args (void) {
2316 unsigned char pool;
2317 unsigned int max_rx_size;
2318
2319#ifdef DEBUG_AMBASSADOR
2320 PRINTK (KERN_NOTICE, "debug bitmap is %hx", debug &= DBG_MASK);
2321#else
2322 if (debug)
2323 PRINTK (KERN_NOTICE, "no debugging support");
2324#endif
2325
2326 if (cmds < MIN_QUEUE_SIZE)
2327 PRINTK (KERN_NOTICE, "cmds has been raised to %u",
2328 cmds = MIN_QUEUE_SIZE);
2329
2330 if (txs < MIN_QUEUE_SIZE)
2331 PRINTK (KERN_NOTICE, "txs has been raised to %u",
2332 txs = MIN_QUEUE_SIZE);
2333
2334 for (pool = 0; pool < NUM_RX_POOLS; ++pool)
2335 if (rxs[pool] < MIN_QUEUE_SIZE)
2336 PRINTK (KERN_NOTICE, "rxs[%hu] has been raised to %u",
2337 pool, rxs[pool] = MIN_QUEUE_SIZE);
2338
2339 // buffers sizes should be greater than zero and strictly increasing
2340 max_rx_size = 0;
2341 for (pool = 0; pool < NUM_RX_POOLS; ++pool)
2342 if (rxs_bs[pool] <= max_rx_size)
2343 PRINTK (KERN_NOTICE, "useless pool (rxs_bs[%hu] = %u)",
2344 pool, rxs_bs[pool]);
2345 else
2346 max_rx_size = rxs_bs[pool];
2347
2348 if (rx_lats < MIN_RX_BUFFERS)
2349 PRINTK (KERN_NOTICE, "rx_lats has been raised to %u",
2350 rx_lats = MIN_RX_BUFFERS);
2351
2352 return;
2353}
2354
2355/********** module stuff **********/
2356
2357MODULE_AUTHOR(maintainer_string);
2358MODULE_DESCRIPTION(description_string);
2359MODULE_LICENSE("GPL");
Ben Hutchingse8c0ae22009-11-07 11:46:07 +00002360MODULE_FIRMWARE("atmsar11.fw");
Linus Torvalds1da177e2005-04-16 15:20:36 -07002361module_param(debug, ushort, 0644);
2362module_param(cmds, uint, 0);
2363module_param(txs, uint, 0);
2364module_param_array(rxs, uint, NULL, 0);
2365module_param_array(rxs_bs, uint, NULL, 0);
2366module_param(rx_lats, uint, 0);
2367module_param(pci_lat, byte, 0);
2368MODULE_PARM_DESC(debug, "debug bitmap, see .h file");
2369MODULE_PARM_DESC(cmds, "number of command queue entries");
2370MODULE_PARM_DESC(txs, "number of TX queue entries");
2371MODULE_PARM_DESC(rxs, "number of RX queue entries [" __MODULE_STRING(NUM_RX_POOLS) "]");
2372MODULE_PARM_DESC(rxs_bs, "size of RX buffers [" __MODULE_STRING(NUM_RX_POOLS) "]");
2373MODULE_PARM_DESC(rx_lats, "number of extra buffers to cope with RX latencies");
2374MODULE_PARM_DESC(pci_lat, "PCI latency in bus cycles");
2375
2376/********** module entry **********/
2377
2378static struct pci_device_id amb_pci_tbl[] = {
Peter Huewe12c84712010-07-15 08:38:20 +00002379 { PCI_VDEVICE(MADGE, PCI_DEVICE_ID_MADGE_AMBASSADOR), 0 },
2380 { PCI_VDEVICE(MADGE, PCI_DEVICE_ID_MADGE_AMBASSADOR_BAD), 0 },
Linus Torvalds1da177e2005-04-16 15:20:36 -07002381 { 0, }
2382};
2383
2384MODULE_DEVICE_TABLE(pci, amb_pci_tbl);
2385
2386static struct pci_driver amb_driver = {
2387 .name = "amb",
2388 .probe = amb_probe,
Greg Kroah-Hartman6c445122012-12-21 13:25:04 -08002389 .remove = amb_remove_one,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002390 .id_table = amb_pci_tbl,
2391};
2392
2393static int __init amb_module_init (void)
2394{
2395 PRINTD (DBG_FLOW|DBG_INIT, "init_module");
2396
2397 // sanity check - cast needed as printk does not support %Zu
2398 if (sizeof(amb_mem) != 4*16 + 4*12) {
2399 PRINTK (KERN_ERR, "Fix amb_mem (is %lu words).",
2400 (unsigned long) sizeof(amb_mem));
2401 return -ENOMEM;
2402 }
2403
2404 show_version();
2405
2406 amb_check_args();
2407
2408 // get the juice
2409 return pci_register_driver(&amb_driver);
2410}
2411
2412/********** module exit **********/
2413
2414static void __exit amb_module_exit (void)
2415{
2416 PRINTD (DBG_FLOW|DBG_INIT, "cleanup_module");
Tobias Klauserb45eccd2006-10-20 19:49:45 -07002417
2418 pci_unregister_driver(&amb_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002419}
2420
2421module_init(amb_module_init);
2422module_exit(amb_module_exit);