| Uwe Kleine-König | ef43eff | 2013-09-17 21:08:42 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Device tree for Energy Micro EFM32 Giant Gecko SoC. |
| 3 | * |
| 4 | * Documentation available from |
| 5 | * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf |
| 6 | */ |
| 7 | #include "armv7-m.dtsi" |
| 8 | #include "dt-bindings/clock/efm32-cmu.h" |
| 9 | |
| 10 | / { |
| 11 | aliases { |
| 12 | i2c0 = &i2c0; |
| 13 | i2c1 = &i2c1; |
| 14 | serial0 = &uart0; |
| 15 | serial1 = &uart1; |
| 16 | serial2 = &uart2; |
| 17 | serial3 = &uart3; |
| 18 | serial4 = &uart4; |
| 19 | spi0 = &spi0; |
| 20 | spi1 = &spi1; |
| 21 | spi2 = &spi2; |
| 22 | }; |
| 23 | |
| 24 | soc { |
| 25 | adc: adc@40002000 { |
| 26 | compatible = "efm32,adc"; |
| 27 | reg = <0x40002000 0x400>; |
| 28 | interrupts = <7>; |
| 29 | clocks = <&cmu clk_HFPERCLKADC0>; |
| 30 | status = "disabled"; |
| 31 | }; |
| 32 | |
| 33 | gpio: gpio@40006000 { |
| 34 | compatible = "efm32,gpio"; |
| 35 | reg = <0x40006000 0x1000>; |
| 36 | interrupts = <1 11>; |
| 37 | gpio-controller; |
| 38 | #gpio-cells = <2>; |
| 39 | interrupt-controller; |
| 40 | #interrupt-cells = <1>; |
| 41 | clocks = <&cmu clk_HFPERCLKGPIO>; |
| 42 | status = "ok"; |
| 43 | }; |
| 44 | |
| 45 | i2c0: i2c@4000a000 { |
| 46 | #address-cells = <1>; |
| 47 | #size-cells = <0>; |
| 48 | compatible = "efm32,i2c"; |
| 49 | reg = <0x4000a000 0x400>; |
| 50 | interrupts = <9>; |
| 51 | clocks = <&cmu clk_HFPERCLKI2C0>; |
| 52 | clock-frequency = <100000>; |
| 53 | status = "disabled"; |
| 54 | }; |
| 55 | |
| 56 | i2c1: i2c@4000a400 { |
| 57 | #address-cells = <1>; |
| 58 | #size-cells = <0>; |
| 59 | compatible = "efm32,i2c"; |
| 60 | reg = <0x4000a400 0x400>; |
| 61 | interrupts = <10>; |
| 62 | clocks = <&cmu clk_HFPERCLKI2C1>; |
| 63 | clock-frequency = <100000>; |
| 64 | status = "disabled"; |
| 65 | }; |
| 66 | |
| 67 | spi0: spi@4000c000 { /* USART0 */ |
| 68 | #address-cells = <1>; |
| 69 | #size-cells = <0>; |
| 70 | compatible = "efm32,spi"; |
| 71 | reg = <0x4000c000 0x400>; |
| 72 | interrupts = <3 4>; |
| 73 | clocks = <&cmu clk_HFPERCLKUSART0>; |
| 74 | status = "disabled"; |
| 75 | }; |
| 76 | |
| 77 | spi1: spi@4000c400 { /* USART1 */ |
| 78 | #address-cells = <1>; |
| 79 | #size-cells = <0>; |
| 80 | compatible = "efm32,spi"; |
| 81 | reg = <0x4000c400 0x400>; |
| 82 | interrupts = <15 16>; |
| 83 | clocks = <&cmu clk_HFPERCLKUSART1>; |
| 84 | status = "disabled"; |
| 85 | }; |
| 86 | |
| Uwe Kleine-König | 64afb24 | 2014-03-14 15:51:15 +0100 | [diff] [blame] | 87 | spi2: spi@4000c800 { /* USART2 */ |
| Uwe Kleine-König | ef43eff | 2013-09-17 21:08:42 +0200 | [diff] [blame] | 88 | #address-cells = <1>; |
| 89 | #size-cells = <0>; |
| 90 | compatible = "efm32,spi"; |
| 91 | reg = <0x4000c800 0x400>; |
| 92 | interrupts = <18 19>; |
| 93 | clocks = <&cmu clk_HFPERCLKUSART2>; |
| 94 | status = "disabled"; |
| 95 | }; |
| 96 | |
| 97 | uart0: uart@4000c000 { /* USART0 */ |
| 98 | compatible = "efm32,uart"; |
| 99 | reg = <0x4000c000 0x400>; |
| 100 | interrupts = <3 4>; |
| 101 | clocks = <&cmu clk_HFPERCLKUSART0>; |
| 102 | status = "disabled"; |
| 103 | }; |
| 104 | |
| 105 | uart1: uart@4000c400 { /* USART1 */ |
| 106 | compatible = "efm32,uart"; |
| 107 | reg = <0x4000c400 0x400>; |
| 108 | interrupts = <15 16>; |
| 109 | clocks = <&cmu clk_HFPERCLKUSART1>; |
| 110 | status = "disabled"; |
| 111 | }; |
| 112 | |
| Uwe Kleine-König | 64afb24 | 2014-03-14 15:51:15 +0100 | [diff] [blame] | 113 | uart2: uart@4000c800 { /* USART2 */ |
| Uwe Kleine-König | ef43eff | 2013-09-17 21:08:42 +0200 | [diff] [blame] | 114 | compatible = "efm32,uart"; |
| 115 | reg = <0x4000c800 0x400>; |
| 116 | interrupts = <18 19>; |
| 117 | clocks = <&cmu clk_HFPERCLKUSART2>; |
| 118 | status = "disabled"; |
| 119 | }; |
| 120 | |
| 121 | uart3: uart@4000e000 { /* UART0 */ |
| 122 | compatible = "efm32,uart"; |
| 123 | reg = <0x4000e000 0x400>; |
| 124 | interrupts = <20 21>; |
| 125 | clocks = <&cmu clk_HFPERCLKUART0>; |
| 126 | status = "disabled"; |
| 127 | }; |
| 128 | |
| 129 | uart4: uart@4000e400 { /* UART1 */ |
| 130 | compatible = "efm32,uart"; |
| 131 | reg = <0x4000e400 0x400>; |
| 132 | interrupts = <22 23>; |
| 133 | clocks = <&cmu clk_HFPERCLKUART1>; |
| 134 | status = "disabled"; |
| 135 | }; |
| 136 | |
| 137 | timer0: timer@40010000 { |
| 138 | compatible = "efm32,timer"; |
| 139 | reg = <0x40010000 0x400>; |
| 140 | interrupts = <2>; |
| 141 | clocks = <&cmu clk_HFPERCLKTIMER0>; |
| 142 | }; |
| 143 | |
| 144 | timer1: timer@40010400 { |
| 145 | compatible = "efm32,timer"; |
| 146 | reg = <0x40010400 0x400>; |
| 147 | interrupts = <12>; |
| 148 | clocks = <&cmu clk_HFPERCLKTIMER1>; |
| 149 | }; |
| 150 | |
| 151 | timer2: timer@40010800 { |
| 152 | compatible = "efm32,timer"; |
| 153 | reg = <0x40010800 0x400>; |
| 154 | interrupts = <13>; |
| 155 | clocks = <&cmu clk_HFPERCLKTIMER2>; |
| 156 | }; |
| 157 | |
| 158 | timer3: timer@40010c00 { |
| 159 | compatible = "efm32,timer"; |
| 160 | reg = <0x40010c00 0x400>; |
| 161 | interrupts = <14>; |
| 162 | clocks = <&cmu clk_HFPERCLKTIMER3>; |
| 163 | }; |
| 164 | |
| 165 | cmu: cmu@400c8000 { |
| 166 | compatible = "efm32gg,cmu"; |
| 167 | reg = <0x400c8000 0x400>; |
| 168 | interrupts = <32>; |
| 169 | #clock-cells = <1>; |
| 170 | }; |
| 171 | }; |
| 172 | }; |