dmitry pervushin | 0644c48 | 2009-09-22 16:46:15 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Freescale STMP378X SPI master driver |
| 3 | * |
| 4 | * Author: dmitry pervushin <dimka@embeddedalley.com> |
| 5 | * |
| 6 | * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. |
| 7 | * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved. |
| 8 | */ |
| 9 | |
| 10 | /* |
| 11 | * The code contained herein is licensed under the GNU General Public |
| 12 | * License. You may obtain a copy of the GNU General Public License |
| 13 | * Version 2 or later at the following locations: |
| 14 | * |
| 15 | * http://www.opensource.org/licenses/gpl-license.html |
| 16 | * http://www.gnu.org/copyleft/gpl.html |
| 17 | */ |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/init.h> |
| 20 | #include <linux/interrupt.h> |
| 21 | #include <linux/platform_device.h> |
| 22 | #include <linux/spi/spi.h> |
| 23 | #include <linux/err.h> |
| 24 | #include <linux/clk.h> |
| 25 | #include <linux/io.h> |
| 26 | #include <linux/dma-mapping.h> |
| 27 | #include <linux/delay.h> |
| 28 | |
| 29 | #include <mach/platform.h> |
| 30 | #include <mach/stmp3xxx.h> |
| 31 | #include <mach/dma.h> |
| 32 | #include <mach/regs-ssp.h> |
| 33 | #include <mach/regs-apbh.h> |
| 34 | |
| 35 | |
| 36 | /* 0 means DMA mode(recommended, default), !0 - PIO mode */ |
| 37 | static int pio; |
| 38 | static int clock; |
| 39 | |
| 40 | /* default timeout for busy waits is 2 seconds */ |
| 41 | #define STMP_SPI_TIMEOUT (2 * HZ) |
| 42 | |
| 43 | struct stmp_spi { |
| 44 | int id; |
| 45 | |
| 46 | void * __iomem regs; /* vaddr of the control registers */ |
| 47 | |
| 48 | int irq, err_irq; |
| 49 | u32 dma; |
| 50 | struct stmp3xxx_dma_descriptor d; |
| 51 | |
| 52 | u32 speed_khz; |
| 53 | u32 saved_timings; |
| 54 | u32 divider; |
| 55 | |
| 56 | struct clk *clk; |
| 57 | struct device *master_dev; |
| 58 | |
| 59 | struct work_struct work; |
| 60 | struct workqueue_struct *workqueue; |
| 61 | |
| 62 | /* lock protects queue access */ |
| 63 | spinlock_t lock; |
| 64 | struct list_head queue; |
| 65 | |
| 66 | struct completion done; |
| 67 | }; |
| 68 | |
| 69 | #define busy_wait(cond) \ |
| 70 | ({ \ |
| 71 | unsigned long end_jiffies = jiffies + STMP_SPI_TIMEOUT; \ |
| 72 | bool succeeded = false; \ |
| 73 | do { \ |
| 74 | if (cond) { \ |
| 75 | succeeded = true; \ |
| 76 | break; \ |
| 77 | } \ |
| 78 | cpu_relax(); \ |
Robert P. J. Day | 68ea2d8 | 2010-01-20 13:49:44 -0700 | [diff] [blame] | 79 | } while (time_before(jiffies, end_jiffies)); \ |
dmitry pervushin | 0644c48 | 2009-09-22 16:46:15 -0700 | [diff] [blame] | 80 | succeeded; \ |
| 81 | }) |
| 82 | |
| 83 | /** |
| 84 | * stmp_spi_init_hw |
| 85 | * Initialize the SSP port |
| 86 | */ |
| 87 | static int stmp_spi_init_hw(struct stmp_spi *ss) |
| 88 | { |
| 89 | int err = 0; |
| 90 | void *pins = ss->master_dev->platform_data; |
| 91 | |
| 92 | err = stmp3xxx_request_pin_group(pins, dev_name(ss->master_dev)); |
| 93 | if (err) |
| 94 | goto out; |
| 95 | |
| 96 | ss->clk = clk_get(NULL, "ssp"); |
| 97 | if (IS_ERR(ss->clk)) { |
| 98 | err = PTR_ERR(ss->clk); |
| 99 | goto out_free_pins; |
| 100 | } |
| 101 | clk_enable(ss->clk); |
| 102 | |
| 103 | stmp3xxx_reset_block(ss->regs, false); |
| 104 | stmp3xxx_dma_reset_channel(ss->dma); |
| 105 | |
| 106 | return 0; |
| 107 | |
| 108 | out_free_pins: |
| 109 | stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); |
| 110 | out: |
| 111 | return err; |
| 112 | } |
| 113 | |
| 114 | static void stmp_spi_release_hw(struct stmp_spi *ss) |
| 115 | { |
| 116 | void *pins = ss->master_dev->platform_data; |
| 117 | |
| 118 | if (ss->clk && !IS_ERR(ss->clk)) { |
| 119 | clk_disable(ss->clk); |
| 120 | clk_put(ss->clk); |
| 121 | } |
| 122 | stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev)); |
| 123 | } |
| 124 | |
| 125 | static int stmp_spi_setup_transfer(struct spi_device *spi, |
| 126 | struct spi_transfer *t) |
| 127 | { |
| 128 | u8 bits_per_word; |
| 129 | u32 hz; |
| 130 | struct stmp_spi *ss = spi_master_get_devdata(spi->master); |
| 131 | u16 rate; |
| 132 | |
| 133 | bits_per_word = spi->bits_per_word; |
| 134 | if (t && t->bits_per_word) |
| 135 | bits_per_word = t->bits_per_word; |
| 136 | |
| 137 | /* |
| 138 | * Calculate speed: |
| 139 | * - by default, use maximum speed from ssp clk |
| 140 | * - if device overrides it, use it |
| 141 | * - if transfer specifies other speed, use transfer's one |
| 142 | */ |
| 143 | hz = 1000 * ss->speed_khz / ss->divider; |
| 144 | if (spi->max_speed_hz) |
| 145 | hz = min(hz, spi->max_speed_hz); |
| 146 | if (t && t->speed_hz) |
| 147 | hz = min(hz, t->speed_hz); |
| 148 | |
| 149 | if (hz == 0) { |
| 150 | dev_err(&spi->dev, "Cannot continue with zero clock\n"); |
| 151 | return -EINVAL; |
| 152 | } |
| 153 | |
| 154 | if (bits_per_word != 8) { |
| 155 | dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", |
| 156 | __func__, bits_per_word); |
| 157 | return -EINVAL; |
| 158 | } |
| 159 | |
| 160 | dev_dbg(&spi->dev, "Requested clk rate = %uHz, max = %uHz/%d = %uHz\n", |
| 161 | hz, ss->speed_khz, ss->divider, |
| 162 | ss->speed_khz * 1000 / ss->divider); |
| 163 | |
| 164 | if (ss->speed_khz * 1000 / ss->divider < hz) { |
| 165 | dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n", |
| 166 | __func__, hz); |
| 167 | return -EINVAL; |
| 168 | } |
| 169 | |
| 170 | rate = 1000 * ss->speed_khz/ss->divider/hz; |
| 171 | |
| 172 | writel(BF(ss->divider, SSP_TIMING_CLOCK_DIVIDE) | |
| 173 | BF(rate - 1, SSP_TIMING_CLOCK_RATE), |
| 174 | HW_SSP_TIMING + ss->regs); |
| 175 | |
| 176 | writel(BF(1 /* mode SPI */, SSP_CTRL1_SSP_MODE) | |
| 177 | BF(4 /* 8 bits */, SSP_CTRL1_WORD_LENGTH) | |
| 178 | ((spi->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) | |
| 179 | ((spi->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0) | |
| 180 | (pio ? 0 : BM_SSP_CTRL1_DMA_ENABLE), |
| 181 | ss->regs + HW_SSP_CTRL1); |
| 182 | |
| 183 | return 0; |
| 184 | } |
| 185 | |
| 186 | static int stmp_spi_setup(struct spi_device *spi) |
| 187 | { |
| 188 | /* spi_setup() does basic checks, |
| 189 | * stmp_spi_setup_transfer() does more later |
| 190 | */ |
| 191 | if (spi->bits_per_word != 8) { |
| 192 | dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", |
| 193 | __func__, spi->bits_per_word); |
| 194 | return -EINVAL; |
| 195 | } |
| 196 | return 0; |
| 197 | } |
| 198 | |
| 199 | static inline u32 stmp_spi_cs(unsigned cs) |
| 200 | { |
| 201 | return ((cs & 1) ? BM_SSP_CTRL0_WAIT_FOR_CMD : 0) | |
| 202 | ((cs & 2) ? BM_SSP_CTRL0_WAIT_FOR_IRQ : 0); |
| 203 | } |
| 204 | |
| 205 | static int stmp_spi_txrx_dma(struct stmp_spi *ss, int cs, |
| 206 | unsigned char *buf, dma_addr_t dma_buf, int len, |
| 207 | int first, int last, bool write) |
| 208 | { |
| 209 | u32 c0 = 0; |
| 210 | dma_addr_t spi_buf_dma = dma_buf; |
| 211 | int status = 0; |
| 212 | enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE; |
| 213 | |
| 214 | c0 |= (first ? BM_SSP_CTRL0_LOCK_CS : 0); |
| 215 | c0 |= (last ? BM_SSP_CTRL0_IGNORE_CRC : 0); |
| 216 | c0 |= (write ? 0 : BM_SSP_CTRL0_READ); |
| 217 | c0 |= BM_SSP_CTRL0_DATA_XFER; |
| 218 | |
| 219 | c0 |= stmp_spi_cs(cs); |
| 220 | |
| 221 | c0 |= BF(len, SSP_CTRL0_XFER_COUNT); |
| 222 | |
| 223 | if (!dma_buf) |
| 224 | spi_buf_dma = dma_map_single(ss->master_dev, buf, len, dir); |
| 225 | |
| 226 | ss->d.command->cmd = |
| 227 | BF(len, APBH_CHn_CMD_XFER_COUNT) | |
| 228 | BF(1, APBH_CHn_CMD_CMDWORDS) | |
| 229 | BM_APBH_CHn_CMD_WAIT4ENDCMD | |
| 230 | BM_APBH_CHn_CMD_IRQONCMPLT | |
| 231 | BF(write ? BV_APBH_CHn_CMD_COMMAND__DMA_READ : |
| 232 | BV_APBH_CHn_CMD_COMMAND__DMA_WRITE, |
| 233 | APBH_CHn_CMD_COMMAND); |
| 234 | ss->d.command->pio_words[0] = c0; |
| 235 | ss->d.command->buf_ptr = spi_buf_dma; |
| 236 | |
| 237 | stmp3xxx_dma_reset_channel(ss->dma); |
| 238 | stmp3xxx_dma_clear_interrupt(ss->dma); |
| 239 | stmp3xxx_dma_enable_interrupt(ss->dma); |
| 240 | init_completion(&ss->done); |
| 241 | stmp3xxx_dma_go(ss->dma, &ss->d, 1); |
| 242 | wait_for_completion(&ss->done); |
| 243 | |
| 244 | if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN)) |
Roel Kluin | b6b24c7 | 2009-11-17 14:06:14 -0800 | [diff] [blame] | 245 | status = -ETIMEDOUT; |
dmitry pervushin | 0644c48 | 2009-09-22 16:46:15 -0700 | [diff] [blame] | 246 | |
| 247 | if (!dma_buf) |
| 248 | dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir); |
| 249 | |
| 250 | return status; |
| 251 | } |
| 252 | |
| 253 | static inline void stmp_spi_enable(struct stmp_spi *ss) |
| 254 | { |
| 255 | stmp3xxx_setl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); |
| 256 | stmp3xxx_clearl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); |
| 257 | } |
| 258 | |
| 259 | static inline void stmp_spi_disable(struct stmp_spi *ss) |
| 260 | { |
| 261 | stmp3xxx_clearl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0); |
| 262 | stmp3xxx_setl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0); |
| 263 | } |
| 264 | |
| 265 | static int stmp_spi_txrx_pio(struct stmp_spi *ss, int cs, |
| 266 | unsigned char *buf, int len, |
| 267 | bool first, bool last, bool write) |
| 268 | { |
| 269 | if (first) |
| 270 | stmp_spi_enable(ss); |
| 271 | |
| 272 | stmp3xxx_setl(stmp_spi_cs(cs), ss->regs + HW_SSP_CTRL0); |
| 273 | |
| 274 | while (len--) { |
| 275 | if (last && len <= 0) |
| 276 | stmp_spi_disable(ss); |
| 277 | |
| 278 | stmp3xxx_clearl(BM_SSP_CTRL0_XFER_COUNT, |
| 279 | ss->regs + HW_SSP_CTRL0); |
| 280 | stmp3xxx_setl(1, ss->regs + HW_SSP_CTRL0); |
| 281 | |
| 282 | if (write) |
| 283 | stmp3xxx_clearl(BM_SSP_CTRL0_READ, |
| 284 | ss->regs + HW_SSP_CTRL0); |
| 285 | else |
| 286 | stmp3xxx_setl(BM_SSP_CTRL0_READ, |
| 287 | ss->regs + HW_SSP_CTRL0); |
| 288 | |
| 289 | /* Run! */ |
| 290 | stmp3xxx_setl(BM_SSP_CTRL0_RUN, ss->regs + HW_SSP_CTRL0); |
| 291 | |
| 292 | if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & |
| 293 | BM_SSP_CTRL0_RUN)) |
| 294 | break; |
| 295 | |
| 296 | if (write) |
| 297 | writel(*buf, ss->regs + HW_SSP_DATA); |
| 298 | |
| 299 | /* Set TRANSFER */ |
| 300 | stmp3xxx_setl(BM_SSP_CTRL0_DATA_XFER, ss->regs + HW_SSP_CTRL0); |
| 301 | |
| 302 | if (!write) { |
| 303 | if (busy_wait((readl(ss->regs + HW_SSP_STATUS) & |
| 304 | BM_SSP_STATUS_FIFO_EMPTY))) |
| 305 | break; |
| 306 | *buf = readl(ss->regs + HW_SSP_DATA) & 0xFF; |
| 307 | } |
| 308 | |
| 309 | if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & |
| 310 | BM_SSP_CTRL0_RUN)) |
| 311 | break; |
| 312 | |
| 313 | /* advance to the next byte */ |
| 314 | buf++; |
| 315 | } |
| 316 | |
| 317 | return len < 0 ? 0 : -ETIMEDOUT; |
| 318 | } |
| 319 | |
| 320 | static int stmp_spi_handle_message(struct stmp_spi *ss, struct spi_message *m) |
| 321 | { |
| 322 | bool first, last; |
| 323 | struct spi_transfer *t, *tmp_t; |
| 324 | int status = 0; |
| 325 | int cs; |
| 326 | |
| 327 | cs = m->spi->chip_select; |
| 328 | |
| 329 | list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) { |
| 330 | |
| 331 | first = (&t->transfer_list == m->transfers.next); |
| 332 | last = (&t->transfer_list == m->transfers.prev); |
| 333 | |
| 334 | if (first || t->speed_hz || t->bits_per_word) |
| 335 | stmp_spi_setup_transfer(m->spi, t); |
| 336 | |
| 337 | /* reject "not last" transfers which request to change cs */ |
| 338 | if (t->cs_change && !last) { |
| 339 | dev_err(&m->spi->dev, |
| 340 | "Message with t->cs_change has been skipped\n"); |
| 341 | continue; |
| 342 | } |
| 343 | |
| 344 | if (t->tx_buf) { |
| 345 | status = pio ? |
| 346 | stmp_spi_txrx_pio(ss, cs, (void *)t->tx_buf, |
| 347 | t->len, first, last, true) : |
| 348 | stmp_spi_txrx_dma(ss, cs, (void *)t->tx_buf, |
| 349 | t->tx_dma, t->len, first, last, true); |
| 350 | #ifdef DEBUG |
| 351 | if (t->len < 0x10) |
| 352 | print_hex_dump_bytes("Tx ", |
| 353 | DUMP_PREFIX_OFFSET, |
| 354 | t->tx_buf, t->len); |
| 355 | else |
| 356 | pr_debug("Tx: %d bytes\n", t->len); |
| 357 | #endif |
| 358 | } |
| 359 | if (t->rx_buf) { |
| 360 | status = pio ? |
| 361 | stmp_spi_txrx_pio(ss, cs, t->rx_buf, |
| 362 | t->len, first, last, false) : |
| 363 | stmp_spi_txrx_dma(ss, cs, t->rx_buf, |
| 364 | t->rx_dma, t->len, first, last, false); |
| 365 | #ifdef DEBUG |
| 366 | if (t->len < 0x10) |
| 367 | print_hex_dump_bytes("Rx ", |
| 368 | DUMP_PREFIX_OFFSET, |
| 369 | t->rx_buf, t->len); |
| 370 | else |
| 371 | pr_debug("Rx: %d bytes\n", t->len); |
| 372 | #endif |
| 373 | } |
| 374 | |
| 375 | if (t->delay_usecs) |
| 376 | udelay(t->delay_usecs); |
| 377 | |
| 378 | if (status) |
| 379 | break; |
| 380 | |
| 381 | } |
| 382 | return status; |
| 383 | } |
| 384 | |
| 385 | /** |
| 386 | * stmp_spi_handle - handle messages from the queue |
| 387 | */ |
| 388 | static void stmp_spi_handle(struct work_struct *w) |
| 389 | { |
| 390 | struct stmp_spi *ss = container_of(w, struct stmp_spi, work); |
| 391 | unsigned long flags; |
| 392 | struct spi_message *m; |
| 393 | |
| 394 | spin_lock_irqsave(&ss->lock, flags); |
| 395 | while (!list_empty(&ss->queue)) { |
| 396 | m = list_entry(ss->queue.next, struct spi_message, queue); |
| 397 | list_del_init(&m->queue); |
| 398 | spin_unlock_irqrestore(&ss->lock, flags); |
| 399 | |
| 400 | m->status = stmp_spi_handle_message(ss, m); |
| 401 | m->complete(m->context); |
| 402 | |
| 403 | spin_lock_irqsave(&ss->lock, flags); |
| 404 | } |
| 405 | spin_unlock_irqrestore(&ss->lock, flags); |
| 406 | |
| 407 | return; |
| 408 | } |
| 409 | |
| 410 | /** |
| 411 | * stmp_spi_transfer - perform message transfer. |
| 412 | * Called indirectly from spi_async, queues all the messages to |
| 413 | * spi_handle_message. |
| 414 | * @spi: spi device |
| 415 | * @m: message to be queued |
| 416 | */ |
| 417 | static int stmp_spi_transfer(struct spi_device *spi, struct spi_message *m) |
| 418 | { |
| 419 | struct stmp_spi *ss = spi_master_get_devdata(spi->master); |
| 420 | unsigned long flags; |
| 421 | |
| 422 | m->status = -EINPROGRESS; |
| 423 | spin_lock_irqsave(&ss->lock, flags); |
| 424 | list_add_tail(&m->queue, &ss->queue); |
| 425 | queue_work(ss->workqueue, &ss->work); |
| 426 | spin_unlock_irqrestore(&ss->lock, flags); |
| 427 | return 0; |
| 428 | } |
| 429 | |
| 430 | static irqreturn_t stmp_spi_irq(int irq, void *dev_id) |
| 431 | { |
| 432 | struct stmp_spi *ss = dev_id; |
| 433 | |
| 434 | stmp3xxx_dma_clear_interrupt(ss->dma); |
| 435 | complete(&ss->done); |
| 436 | return IRQ_HANDLED; |
| 437 | } |
| 438 | |
| 439 | static irqreturn_t stmp_spi_irq_err(int irq, void *dev_id) |
| 440 | { |
| 441 | struct stmp_spi *ss = dev_id; |
| 442 | u32 c1, st; |
| 443 | |
| 444 | c1 = readl(ss->regs + HW_SSP_CTRL1); |
| 445 | st = readl(ss->regs + HW_SSP_STATUS); |
| 446 | dev_err(ss->master_dev, "%s: status = 0x%08X, c1 = 0x%08X\n", |
| 447 | __func__, st, c1); |
| 448 | stmp3xxx_clearl(c1 & 0xCCCC0000, ss->regs + HW_SSP_CTRL1); |
| 449 | |
| 450 | return IRQ_HANDLED; |
| 451 | } |
| 452 | |
| 453 | static int __devinit stmp_spi_probe(struct platform_device *dev) |
| 454 | { |
| 455 | int err = 0; |
| 456 | struct spi_master *master; |
| 457 | struct stmp_spi *ss; |
| 458 | struct resource *r; |
| 459 | |
| 460 | master = spi_alloc_master(&dev->dev, sizeof(struct stmp_spi)); |
| 461 | if (master == NULL) { |
| 462 | err = -ENOMEM; |
| 463 | goto out0; |
| 464 | } |
| 465 | master->flags = SPI_MASTER_HALF_DUPLEX; |
| 466 | |
| 467 | ss = spi_master_get_devdata(master); |
| 468 | platform_set_drvdata(dev, master); |
| 469 | |
| 470 | /* Get resources(memory, IRQ) associated with the device */ |
| 471 | r = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| 472 | if (r == NULL) { |
| 473 | err = -ENODEV; |
| 474 | goto out_put_master; |
| 475 | } |
| 476 | ss->regs = ioremap(r->start, resource_size(r)); |
| 477 | if (!ss->regs) { |
| 478 | err = -EINVAL; |
| 479 | goto out_put_master; |
| 480 | } |
| 481 | |
| 482 | ss->master_dev = &dev->dev; |
| 483 | ss->id = dev->id; |
| 484 | |
| 485 | INIT_WORK(&ss->work, stmp_spi_handle); |
| 486 | INIT_LIST_HEAD(&ss->queue); |
| 487 | spin_lock_init(&ss->lock); |
| 488 | |
| 489 | ss->workqueue = create_singlethread_workqueue(dev_name(&dev->dev)); |
| 490 | if (!ss->workqueue) { |
| 491 | err = -ENXIO; |
| 492 | goto out_put_master; |
| 493 | } |
| 494 | master->transfer = stmp_spi_transfer; |
| 495 | master->setup = stmp_spi_setup; |
| 496 | |
| 497 | /* the spi->mode bits understood by this driver: */ |
| 498 | master->mode_bits = SPI_CPOL | SPI_CPHA; |
| 499 | |
| 500 | ss->irq = platform_get_irq(dev, 0); |
| 501 | if (ss->irq < 0) { |
| 502 | err = ss->irq; |
| 503 | goto out_put_master; |
| 504 | } |
| 505 | ss->err_irq = platform_get_irq(dev, 1); |
| 506 | if (ss->err_irq < 0) { |
| 507 | err = ss->err_irq; |
| 508 | goto out_put_master; |
| 509 | } |
| 510 | |
| 511 | r = platform_get_resource(dev, IORESOURCE_DMA, 0); |
| 512 | if (r == NULL) { |
| 513 | err = -ENODEV; |
| 514 | goto out_put_master; |
| 515 | } |
| 516 | |
| 517 | ss->dma = r->start; |
| 518 | err = stmp3xxx_dma_request(ss->dma, &dev->dev, dev_name(&dev->dev)); |
| 519 | if (err) |
| 520 | goto out_put_master; |
| 521 | |
| 522 | err = stmp3xxx_dma_allocate_command(ss->dma, &ss->d); |
| 523 | if (err) |
| 524 | goto out_free_dma; |
| 525 | |
| 526 | master->bus_num = dev->id; |
| 527 | master->num_chipselect = 1; |
| 528 | |
| 529 | /* SPI controller initializations */ |
| 530 | err = stmp_spi_init_hw(ss); |
| 531 | if (err) { |
| 532 | dev_dbg(&dev->dev, "cannot initialize hardware\n"); |
| 533 | goto out_free_dma_desc; |
| 534 | } |
| 535 | |
| 536 | if (clock) { |
| 537 | dev_info(&dev->dev, "clock rate forced to %d\n", clock); |
| 538 | clk_set_rate(ss->clk, clock); |
| 539 | } |
| 540 | ss->speed_khz = clk_get_rate(ss->clk); |
| 541 | ss->divider = 2; |
| 542 | dev_info(&dev->dev, "max possible speed %d = %ld/%d kHz\n", |
| 543 | ss->speed_khz, clk_get_rate(ss->clk), ss->divider); |
| 544 | |
| 545 | /* Register for SPI interrupt */ |
| 546 | err = request_irq(ss->irq, stmp_spi_irq, 0, |
| 547 | dev_name(&dev->dev), ss); |
| 548 | if (err) { |
| 549 | dev_dbg(&dev->dev, "request_irq failed, %d\n", err); |
| 550 | goto out_release_hw; |
| 551 | } |
| 552 | |
| 553 | /* ..and shared interrupt for all SSP controllers */ |
| 554 | err = request_irq(ss->err_irq, stmp_spi_irq_err, IRQF_SHARED, |
| 555 | dev_name(&dev->dev), ss); |
| 556 | if (err) { |
| 557 | dev_dbg(&dev->dev, "request_irq(error) failed, %d\n", err); |
| 558 | goto out_free_irq; |
| 559 | } |
| 560 | |
| 561 | err = spi_register_master(master); |
| 562 | if (err) { |
| 563 | dev_dbg(&dev->dev, "cannot register spi master, %d\n", err); |
| 564 | goto out_free_irq_2; |
| 565 | } |
| 566 | dev_info(&dev->dev, "at (mapped) 0x%08X, irq=%d, bus %d, %s mode\n", |
| 567 | (u32)ss->regs, ss->irq, master->bus_num, |
| 568 | pio ? "PIO" : "DMA"); |
| 569 | return 0; |
| 570 | |
| 571 | out_free_irq_2: |
| 572 | free_irq(ss->err_irq, ss); |
| 573 | out_free_irq: |
| 574 | free_irq(ss->irq, ss); |
| 575 | out_free_dma_desc: |
| 576 | stmp3xxx_dma_free_command(ss->dma, &ss->d); |
| 577 | out_free_dma: |
| 578 | stmp3xxx_dma_release(ss->dma); |
| 579 | out_release_hw: |
| 580 | stmp_spi_release_hw(ss); |
| 581 | out_put_master: |
| 582 | if (ss->workqueue) |
| 583 | destroy_workqueue(ss->workqueue); |
| 584 | if (ss->regs) |
| 585 | iounmap(ss->regs); |
| 586 | platform_set_drvdata(dev, NULL); |
| 587 | spi_master_put(master); |
| 588 | out0: |
| 589 | return err; |
| 590 | } |
| 591 | |
| 592 | static int __devexit stmp_spi_remove(struct platform_device *dev) |
| 593 | { |
| 594 | struct stmp_spi *ss; |
| 595 | struct spi_master *master; |
| 596 | |
Guenter Roeck | 154390d | 2012-08-23 20:08:47 -0700 | [diff] [blame] | 597 | master = spi_master_get(platform_get_drvdata(dev)); |
dmitry pervushin | 0644c48 | 2009-09-22 16:46:15 -0700 | [diff] [blame] | 598 | ss = spi_master_get_devdata(master); |
| 599 | |
| 600 | spi_unregister_master(master); |
| 601 | |
| 602 | free_irq(ss->err_irq, ss); |
| 603 | free_irq(ss->irq, ss); |
| 604 | stmp3xxx_dma_free_command(ss->dma, &ss->d); |
| 605 | stmp3xxx_dma_release(ss->dma); |
| 606 | stmp_spi_release_hw(ss); |
| 607 | destroy_workqueue(ss->workqueue); |
| 608 | iounmap(ss->regs); |
| 609 | spi_master_put(master); |
dmitry pervushin | 0644c48 | 2009-09-22 16:46:15 -0700 | [diff] [blame] | 610 | return 0; |
| 611 | } |
| 612 | |
| 613 | #ifdef CONFIG_PM |
| 614 | static int stmp_spi_suspend(struct platform_device *pdev, pm_message_t pmsg) |
| 615 | { |
| 616 | struct stmp_spi *ss; |
| 617 | struct spi_master *master; |
| 618 | |
| 619 | master = platform_get_drvdata(pdev); |
| 620 | ss = spi_master_get_devdata(master); |
| 621 | |
| 622 | ss->saved_timings = readl(HW_SSP_TIMING + ss->regs); |
| 623 | clk_disable(ss->clk); |
| 624 | |
| 625 | return 0; |
| 626 | } |
| 627 | |
| 628 | static int stmp_spi_resume(struct platform_device *pdev) |
| 629 | { |
| 630 | struct stmp_spi *ss; |
| 631 | struct spi_master *master; |
| 632 | |
| 633 | master = platform_get_drvdata(pdev); |
| 634 | ss = spi_master_get_devdata(master); |
| 635 | |
| 636 | clk_enable(ss->clk); |
| 637 | stmp3xxx_reset_block(ss->regs, false); |
| 638 | writel(ss->saved_timings, ss->regs + HW_SSP_TIMING); |
| 639 | |
| 640 | return 0; |
| 641 | } |
| 642 | |
| 643 | #else |
| 644 | #define stmp_spi_suspend NULL |
| 645 | #define stmp_spi_resume NULL |
| 646 | #endif |
| 647 | |
| 648 | static struct platform_driver stmp_spi_driver = { |
| 649 | .probe = stmp_spi_probe, |
| 650 | .remove = __devexit_p(stmp_spi_remove), |
| 651 | .driver = { |
| 652 | .name = "stmp3xxx_ssp", |
| 653 | .owner = THIS_MODULE, |
| 654 | }, |
| 655 | .suspend = stmp_spi_suspend, |
| 656 | .resume = stmp_spi_resume, |
| 657 | }; |
Grant Likely | 940ab88 | 2011-10-05 11:29:49 -0600 | [diff] [blame] | 658 | module_platform_driver(stmp_spi_driver); |
dmitry pervushin | 0644c48 | 2009-09-22 16:46:15 -0700 | [diff] [blame] | 659 | |
dmitry pervushin | 0644c48 | 2009-09-22 16:46:15 -0700 | [diff] [blame] | 660 | module_param(pio, int, S_IRUGO); |
| 661 | module_param(clock, int, S_IRUGO); |
| 662 | MODULE_AUTHOR("dmitry pervushin <dpervushin@embeddedalley.com>"); |
| 663 | MODULE_DESCRIPTION("STMP3xxx SPI/SSP driver"); |
| 664 | MODULE_LICENSE("GPL"); |