blob: 77da6a2f43dc986a5b6eb17d065b9f53b80dce69 [file] [log] [blame]
Heiko Stübner2c8304d2012-04-28 12:20:00 +02001/*
2 * Common code for AUO-K190X framebuffer drivers
3 *
4 * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10
11#include <linux/module.h>
12#include <linux/kernel.h>
13#include <linux/gpio.h>
14#include <linux/pm_runtime.h>
15#include <linux/fb.h>
16#include <linux/delay.h>
17#include <linux/uaccess.h>
18#include <linux/vmalloc.h>
19#include <linux/regulator/consumer.h>
20
21#include <video/auo_k190xfb.h>
22
23#include "auo_k190x.h"
24
25struct panel_info {
26 int w;
27 int h;
28};
29
30/* table of panel specific parameters to be indexed into by the board drivers */
31static struct panel_info panel_table[] = {
32 /* standard 6" */
33 [AUOK190X_RESOLUTION_800_600] = {
34 .w = 800,
35 .h = 600,
36 },
37 /* standard 9" */
38 [AUOK190X_RESOLUTION_1024_768] = {
39 .w = 1024,
40 .h = 768,
41 },
42};
43
44/*
45 * private I80 interface to the board driver
46 */
47
48static void auok190x_issue_data(struct auok190xfb_par *par, u16 data)
49{
50 par->board->set_ctl(par, AUOK190X_I80_WR, 0);
51 par->board->set_hdb(par, data);
52 par->board->set_ctl(par, AUOK190X_I80_WR, 1);
53}
54
55static void auok190x_issue_cmd(struct auok190xfb_par *par, u16 data)
56{
57 par->board->set_ctl(par, AUOK190X_I80_DC, 0);
58 auok190x_issue_data(par, data);
59 par->board->set_ctl(par, AUOK190X_I80_DC, 1);
60}
61
62static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
63 u16 *data)
64{
65 struct device *dev = par->info->device;
66 int i;
67 u16 tmp;
68
69 if (size & 3) {
70 dev_err(dev, "issue_pixels: size %d must be a multiple of 4\n",
71 size);
72 return -EINVAL;
73 }
74
75 for (i = 0; i < (size >> 1); i++) {
76 par->board->set_ctl(par, AUOK190X_I80_WR, 0);
77
78 /* simple reduction of 8bit staticgray to 4bit gray
79 * combines 4 * 4bit pixel values into a 16bit value
80 */
81 tmp = (data[2*i] & 0xF0) >> 4;
82 tmp |= (data[2*i] & 0xF000) >> 8;
83 tmp |= (data[2*i+1] & 0xF0) << 4;
84 tmp |= (data[2*i+1] & 0xF000);
85
86 par->board->set_hdb(par, tmp);
87 par->board->set_ctl(par, AUOK190X_I80_WR, 1);
88 }
89
90 return 0;
91}
92
93static u16 auok190x_read_data(struct auok190xfb_par *par)
94{
95 u16 data;
96
97 par->board->set_ctl(par, AUOK190X_I80_OE, 0);
98 data = par->board->get_hdb(par);
99 par->board->set_ctl(par, AUOK190X_I80_OE, 1);
100
101 return data;
102}
103
104/*
105 * Command interface for the controller drivers
106 */
107
108void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data)
109{
110 par->board->set_ctl(par, AUOK190X_I80_CS, 0);
111 auok190x_issue_cmd(par, data);
112 par->board->set_ctl(par, AUOK190X_I80_CS, 1);
113}
114EXPORT_SYMBOL_GPL(auok190x_send_command_nowait);
115
116void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd,
117 int argc, u16 *argv)
118{
119 int i;
120
121 par->board->set_ctl(par, AUOK190X_I80_CS, 0);
122 auok190x_issue_cmd(par, cmd);
123
124 for (i = 0; i < argc; i++)
125 auok190x_issue_data(par, argv[i]);
126 par->board->set_ctl(par, AUOK190X_I80_CS, 1);
127}
128EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_nowait);
129
130int auok190x_send_command(struct auok190xfb_par *par, u16 data)
131{
132 int ret;
133
134 ret = par->board->wait_for_rdy(par);
135 if (ret)
136 return ret;
137
138 auok190x_send_command_nowait(par, data);
139 return 0;
140}
141EXPORT_SYMBOL_GPL(auok190x_send_command);
142
143int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd,
144 int argc, u16 *argv)
145{
146 int ret;
147
148 ret = par->board->wait_for_rdy(par);
149 if (ret)
150 return ret;
151
152 auok190x_send_cmdargs_nowait(par, cmd, argc, argv);
153 return 0;
154}
155EXPORT_SYMBOL_GPL(auok190x_send_cmdargs);
156
157int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd,
158 int argc, u16 *argv)
159{
160 int i, ret;
161
162 ret = par->board->wait_for_rdy(par);
163 if (ret)
164 return ret;
165
166 par->board->set_ctl(par, AUOK190X_I80_CS, 0);
167 auok190x_issue_cmd(par, cmd);
168
169 for (i = 0; i < argc; i++)
170 argv[i] = auok190x_read_data(par);
171 par->board->set_ctl(par, AUOK190X_I80_CS, 1);
172
173 return 0;
174}
175EXPORT_SYMBOL_GPL(auok190x_read_cmdargs);
176
177void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par, u16 cmd,
178 int argc, u16 *argv, int size, u16 *data)
179{
180 int i;
181
182 par->board->set_ctl(par, AUOK190X_I80_CS, 0);
183
184 auok190x_issue_cmd(par, cmd);
185
186 for (i = 0; i < argc; i++)
187 auok190x_issue_data(par, argv[i]);
188
189 auok190x_issue_pixels(par, size, data);
190
191 par->board->set_ctl(par, AUOK190X_I80_CS, 1);
192}
193EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels_nowait);
194
195int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd,
196 int argc, u16 *argv, int size, u16 *data)
197{
198 int ret;
199
200 ret = par->board->wait_for_rdy(par);
201 if (ret)
202 return ret;
203
204 auok190x_send_cmdargs_pixels_nowait(par, cmd, argc, argv, size, data);
205
206 return 0;
207}
208EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels);
209
210/*
211 * fbdefio callbacks - common on both controllers.
212 */
213
214static void auok190xfb_dpy_first_io(struct fb_info *info)
215{
216 /* tell runtime-pm that we wish to use the device in a short time */
217 pm_runtime_get(info->device);
218}
219
220/* this is called back from the deferred io workqueue */
221static void auok190xfb_dpy_deferred_io(struct fb_info *info,
222 struct list_head *pagelist)
223{
224 struct fb_deferred_io *fbdefio = info->fbdefio;
225 struct auok190xfb_par *par = info->par;
226 u16 yres = info->var.yres;
227 u16 xres = info->var.xres;
228 u16 y1 = 0, h = 0;
229 int prev_index = -1;
230 struct page *cur;
231 int h_inc;
232 int threshold;
233
234 if (!list_empty(pagelist))
235 /* the device resume should've been requested through first_io,
236 * if the resume did not finish until now, wait for it.
237 */
238 pm_runtime_barrier(info->device);
239 else
240 /* We reached this via the fsync or some other way.
241 * In either case the first_io function did not run,
242 * so we runtime_resume the device here synchronously.
243 */
244 pm_runtime_get_sync(info->device);
245
246 /* Do a full screen update every n updates to prevent
247 * excessive darkening of the Sipix display.
248 * If we do this, there is no need to walk the pages.
249 */
250 if (par->need_refresh(par)) {
251 par->update_all(par);
252 goto out;
253 }
254
255 /* height increment is fixed per page */
256 h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
257
258 /* calculate number of pages from pixel height */
259 threshold = par->consecutive_threshold / h_inc;
260 if (threshold < 1)
261 threshold = 1;
262
263 /* walk the written page list and swizzle the data */
264 list_for_each_entry(cur, &fbdefio->pagelist, lru) {
265 if (prev_index < 0) {
266 /* just starting so assign first page */
267 y1 = (cur->index << PAGE_SHIFT) / xres;
268 h = h_inc;
269 } else if ((cur->index - prev_index) <= threshold) {
270 /* page is within our threshold for single updates */
271 h += h_inc * (cur->index - prev_index);
272 } else {
273 /* page not consecutive, issue previous update first */
274 par->update_partial(par, y1, y1 + h);
275
276 /* start over with our non consecutive page */
277 y1 = (cur->index << PAGE_SHIFT) / xres;
278 h = h_inc;
279 }
280 prev_index = cur->index;
281 }
282
283 /* if we still have any pages to update we do so now */
284 if (h >= yres)
285 /* its a full screen update, just do it */
286 par->update_all(par);
287 else
288 par->update_partial(par, y1, min((u16) (y1 + h), yres));
289
290out:
291 pm_runtime_mark_last_busy(info->device);
292 pm_runtime_put_autosuspend(info->device);
293}
294
295/*
296 * framebuffer operations
297 */
298
299/*
300 * this is the slow path from userspace. they can seek and write to
301 * the fb. it's inefficient to do anything less than a full screen draw
302 */
303static ssize_t auok190xfb_write(struct fb_info *info, const char __user *buf,
304 size_t count, loff_t *ppos)
305{
306 struct auok190xfb_par *par = info->par;
307 unsigned long p = *ppos;
308 void *dst;
309 int err = 0;
310 unsigned long total_size;
311
312 if (info->state != FBINFO_STATE_RUNNING)
313 return -EPERM;
314
315 total_size = info->fix.smem_len;
316
317 if (p > total_size)
318 return -EFBIG;
319
320 if (count > total_size) {
321 err = -EFBIG;
322 count = total_size;
323 }
324
325 if (count + p > total_size) {
326 if (!err)
327 err = -ENOSPC;
328
329 count = total_size - p;
330 }
331
332 dst = (void *)(info->screen_base + p);
333
334 if (copy_from_user(dst, buf, count))
335 err = -EFAULT;
336
337 if (!err)
338 *ppos += count;
339
340 par->update_all(par);
341
342 return (err) ? err : count;
343}
344
345static void auok190xfb_fillrect(struct fb_info *info,
346 const struct fb_fillrect *rect)
347{
348 struct auok190xfb_par *par = info->par;
349
350 sys_fillrect(info, rect);
351
352 par->update_all(par);
353}
354
355static void auok190xfb_copyarea(struct fb_info *info,
356 const struct fb_copyarea *area)
357{
358 struct auok190xfb_par *par = info->par;
359
360 sys_copyarea(info, area);
361
362 par->update_all(par);
363}
364
365static void auok190xfb_imageblit(struct fb_info *info,
366 const struct fb_image *image)
367{
368 struct auok190xfb_par *par = info->par;
369
370 sys_imageblit(info, image);
371
372 par->update_all(par);
373}
374
375static int auok190xfb_check_var(struct fb_var_screeninfo *var,
376 struct fb_info *info)
377{
378 if (info->var.xres != var->xres || info->var.yres != var->yres ||
379 info->var.xres_virtual != var->xres_virtual ||
380 info->var.yres_virtual != var->yres_virtual) {
381 pr_info("%s: Resolution not supported: X%u x Y%u\n",
382 __func__, var->xres, var->yres);
383 return -EINVAL;
384 }
385
386 /*
387 * Memory limit
388 */
389
390 if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
391 pr_info("%s: Memory Limit requested yres_virtual = %u\n",
392 __func__, var->yres_virtual);
393 return -ENOMEM;
394 }
395
396 return 0;
397}
398
399static struct fb_ops auok190xfb_ops = {
400 .owner = THIS_MODULE,
401 .fb_read = fb_sys_read,
402 .fb_write = auok190xfb_write,
403 .fb_fillrect = auok190xfb_fillrect,
404 .fb_copyarea = auok190xfb_copyarea,
405 .fb_imageblit = auok190xfb_imageblit,
406 .fb_check_var = auok190xfb_check_var,
407};
408
409/*
410 * Controller-functions common to both K1900 and K1901
411 */
412
413static int auok190x_read_temperature(struct auok190xfb_par *par)
414{
415 struct device *dev = par->info->device;
416 u16 data[4];
417 int temp;
418
419 pm_runtime_get_sync(dev);
420
421 mutex_lock(&(par->io_lock));
422
423 auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data);
424
425 mutex_unlock(&(par->io_lock));
426
427 pm_runtime_mark_last_busy(dev);
428 pm_runtime_put_autosuspend(dev);
429
430 /* sanitize and split of half-degrees for now */
431 temp = ((data[0] & AUOK190X_VERSION_TEMP_MASK) >> 1);
432
433 /* handle positive and negative temperatures */
434 if (temp >= 201)
435 return (255 - temp + 1) * (-1);
436 else
437 return temp;
438}
439
440static void auok190x_identify(struct auok190xfb_par *par)
441{
442 struct device *dev = par->info->device;
443 u16 data[4];
444
445 pm_runtime_get_sync(dev);
446
447 mutex_lock(&(par->io_lock));
448
449 auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data);
450
451 mutex_unlock(&(par->io_lock));
452
453 par->epd_type = data[1] & AUOK190X_VERSION_TEMP_MASK;
454
455 par->panel_size_int = AUOK190X_VERSION_SIZE_INT(data[2]);
456 par->panel_size_float = AUOK190X_VERSION_SIZE_FLOAT(data[2]);
457 par->panel_model = AUOK190X_VERSION_MODEL(data[2]);
458
459 par->tcon_version = AUOK190X_VERSION_TCON(data[3]);
460 par->lut_version = AUOK190X_VERSION_LUT(data[3]);
461
462 dev_dbg(dev, "panel %d.%din, model 0x%x, EPD 0x%x TCON-rev 0x%x, LUT-rev 0x%x",
463 par->panel_size_int, par->panel_size_float, par->panel_model,
464 par->epd_type, par->tcon_version, par->lut_version);
465
466 pm_runtime_mark_last_busy(dev);
467 pm_runtime_put_autosuspend(dev);
468}
469
470/*
471 * Sysfs functions
472 */
473
474static ssize_t update_mode_show(struct device *dev,
475 struct device_attribute *attr, char *buf)
476{
477 struct fb_info *info = dev_get_drvdata(dev);
478 struct auok190xfb_par *par = info->par;
479
480 return sprintf(buf, "%d\n", par->update_mode);
481}
482
483static ssize_t update_mode_store(struct device *dev,
484 struct device_attribute *attr,
485 const char *buf, size_t count)
486{
487 struct fb_info *info = dev_get_drvdata(dev);
488 struct auok190xfb_par *par = info->par;
489 int mode, ret;
490
491 ret = kstrtoint(buf, 10, &mode);
492 if (ret)
493 return ret;
494
495 par->update_mode = mode;
496
497 /* if we enter a better mode, do a full update */
498 if (par->last_mode > 1 && mode < par->last_mode)
499 par->update_all(par);
500
501 return count;
502}
503
504static ssize_t flash_show(struct device *dev, struct device_attribute *attr,
505 char *buf)
506{
507 struct fb_info *info = dev_get_drvdata(dev);
508 struct auok190xfb_par *par = info->par;
509
510 return sprintf(buf, "%d\n", par->flash);
511}
512
513static ssize_t flash_store(struct device *dev, struct device_attribute *attr,
514 const char *buf, size_t count)
515{
516 struct fb_info *info = dev_get_drvdata(dev);
517 struct auok190xfb_par *par = info->par;
518 int flash, ret;
519
520 ret = kstrtoint(buf, 10, &flash);
521 if (ret)
522 return ret;
523
524 if (flash > 0)
525 par->flash = 1;
526 else
527 par->flash = 0;
528
529 return count;
530}
531
532static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
533 char *buf)
534{
535 struct fb_info *info = dev_get_drvdata(dev);
536 struct auok190xfb_par *par = info->par;
537 int temp;
538
539 temp = auok190x_read_temperature(par);
540 return sprintf(buf, "%d\n", temp);
541}
542
543static DEVICE_ATTR(update_mode, 0644, update_mode_show, update_mode_store);
544static DEVICE_ATTR(flash, 0644, flash_show, flash_store);
545static DEVICE_ATTR(temp, 0644, temp_show, NULL);
546
547static struct attribute *auok190x_attributes[] = {
548 &dev_attr_update_mode.attr,
549 &dev_attr_flash.attr,
550 &dev_attr_temp.attr,
551 NULL
552};
553
554static const struct attribute_group auok190x_attr_group = {
555 .attrs = auok190x_attributes,
556};
557
558static int auok190x_power(struct auok190xfb_par *par, bool on)
559{
560 struct auok190x_board *board = par->board;
561 int ret;
562
563 if (on) {
564 /* We should maintain POWER up for at least 80ms before set
565 * RST_N and SLP_N to high (TCON spec 20100803_v35 p59)
566 */
567 ret = regulator_enable(par->regulator);
568 if (ret)
569 return ret;
570
571 msleep(200);
572 gpio_set_value(board->gpio_nrst, 1);
573 gpio_set_value(board->gpio_nsleep, 1);
574 msleep(200);
575 } else {
576 regulator_disable(par->regulator);
577 gpio_set_value(board->gpio_nrst, 0);
578 gpio_set_value(board->gpio_nsleep, 0);
579 }
580
581 return 0;
582}
583
584/*
585 * Recovery - powercycle the controller
586 */
587
588static void auok190x_recover(struct auok190xfb_par *par)
589{
590 auok190x_power(par, 0);
591 msleep(100);
592 auok190x_power(par, 1);
593
594 par->init(par);
595
596 /* wait for init to complete */
597 par->board->wait_for_rdy(par);
598}
599
600/*
601 * Power-management
602 */
603
604#ifdef CONFIG_PM
605static int auok190x_runtime_suspend(struct device *dev)
606{
607 struct platform_device *pdev = to_platform_device(dev);
608 struct fb_info *info = platform_get_drvdata(pdev);
609 struct auok190xfb_par *par = info->par;
610 struct auok190x_board *board = par->board;
611 u16 standby_param;
612
613 /* take and keep the lock until we are resumed, as the controller
614 * will never reach the non-busy state when in standby mode
615 */
616 mutex_lock(&(par->io_lock));
617
618 if (par->standby) {
619 dev_warn(dev, "already in standby, runtime-pm pairing mismatch\n");
620 mutex_unlock(&(par->io_lock));
621 return 0;
622 }
623
624 /* according to runtime_pm.txt runtime_suspend only means, that the
625 * device will not process data and will not communicate with the CPU
626 * As we hold the lock, this stays true even without standby
627 */
628 if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
629 dev_dbg(dev, "runtime suspend without standby\n");
630 goto finish;
631 } else if (board->quirks & AUOK190X_QUIRK_STANDBYPARAM) {
632 /* for some TCON versions STANDBY expects a parameter (0) but
633 * it seems the real tcon version has to be determined yet.
634 */
635 dev_dbg(dev, "runtime suspend with additional empty param\n");
636 standby_param = 0;
637 auok190x_send_cmdargs(par, AUOK190X_CMD_STANDBY, 1,
638 &standby_param);
639 } else {
640 dev_dbg(dev, "runtime suspend without param\n");
641 auok190x_send_command(par, AUOK190X_CMD_STANDBY);
642 }
643
644 msleep(64);
645
646finish:
647 par->standby = 1;
648
649 return 0;
650}
651
652static int auok190x_runtime_resume(struct device *dev)
653{
654 struct platform_device *pdev = to_platform_device(dev);
655 struct fb_info *info = platform_get_drvdata(pdev);
656 struct auok190xfb_par *par = info->par;
657 struct auok190x_board *board = par->board;
658
659 if (!par->standby) {
660 dev_warn(dev, "not in standby, runtime-pm pairing mismatch\n");
661 return 0;
662 }
663
664 if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
665 dev_dbg(dev, "runtime resume without standby\n");
666 } else {
667 /* when in standby, controller is always busy
668 * and only accepts the wakeup command
669 */
670 dev_dbg(dev, "runtime resume from standby\n");
671 auok190x_send_command_nowait(par, AUOK190X_CMD_WAKEUP);
672
673 msleep(160);
674
675 /* wait for the controller to be ready and release the lock */
676 board->wait_for_rdy(par);
677 }
678
679 par->standby = 0;
680
681 mutex_unlock(&(par->io_lock));
682
683 return 0;
684}
685
686static int auok190x_suspend(struct device *dev)
687{
688 struct platform_device *pdev = to_platform_device(dev);
689 struct fb_info *info = platform_get_drvdata(pdev);
690 struct auok190xfb_par *par = info->par;
691 struct auok190x_board *board = par->board;
692 int ret;
693
694 dev_dbg(dev, "suspend\n");
695 if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
696 /* suspend via powering off the ic */
697 dev_dbg(dev, "suspend with broken standby\n");
698
699 auok190x_power(par, 0);
700 } else {
701 dev_dbg(dev, "suspend using sleep\n");
702
703 /* the sleep state can only be entered from the standby state.
704 * pm_runtime_get_noresume gets called before the suspend call.
705 * So the devices usage count is >0 but it is not necessarily
706 * active.
707 */
708 if (!pm_runtime_status_suspended(dev)) {
709 ret = auok190x_runtime_suspend(dev);
710 if (ret < 0) {
711 dev_err(dev, "auok190x_runtime_suspend failed with %d\n",
712 ret);
713 return ret;
714 }
715 par->manual_standby = 1;
716 }
717
718 gpio_direction_output(board->gpio_nsleep, 0);
719 }
720
721 msleep(100);
722
723 return 0;
724}
725
726static int auok190x_resume(struct device *dev)
727{
728 struct platform_device *pdev = to_platform_device(dev);
729 struct fb_info *info = platform_get_drvdata(pdev);
730 struct auok190xfb_par *par = info->par;
731 struct auok190x_board *board = par->board;
732
733 dev_dbg(dev, "resume\n");
734 if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
735 dev_dbg(dev, "resume with broken standby\n");
736
737 auok190x_power(par, 1);
738
739 par->init(par);
740 } else {
741 dev_dbg(dev, "resume from sleep\n");
742
743 /* device should be in runtime suspend when we were suspended
744 * and pm_runtime_put_sync gets called after this function.
745 * So there is no need to touch the standby mode here at all.
746 */
747 gpio_direction_output(board->gpio_nsleep, 1);
748 msleep(100);
749
750 /* an additional init call seems to be necessary after sleep */
751 auok190x_runtime_resume(dev);
752 par->init(par);
753
754 /* if we were runtime-suspended before, suspend again*/
755 if (!par->manual_standby)
756 auok190x_runtime_suspend(dev);
757 else
758 par->manual_standby = 0;
759 }
760
761 return 0;
762}
763#endif
764
765const struct dev_pm_ops auok190x_pm = {
766 SET_RUNTIME_PM_OPS(auok190x_runtime_suspend, auok190x_runtime_resume,
767 NULL)
768 SET_SYSTEM_SLEEP_PM_OPS(auok190x_suspend, auok190x_resume)
769};
770EXPORT_SYMBOL_GPL(auok190x_pm);
771
772/*
773 * Common probe and remove code
774 */
775
776int __devinit auok190x_common_probe(struct platform_device *pdev,
777 struct auok190x_init_data *init)
778{
779 struct auok190x_board *board = init->board;
780 struct auok190xfb_par *par;
781 struct fb_info *info;
782 struct panel_info *panel;
783 int videomemorysize, ret;
784 unsigned char *videomemory;
785
786 /* check board contents */
787 if (!board->init || !board->cleanup || !board->wait_for_rdy
788 || !board->set_ctl || !board->set_hdb || !board->get_hdb
789 || !board->setup_irq)
790 return -EINVAL;
791
792 info = framebuffer_alloc(sizeof(struct auok190xfb_par), &pdev->dev);
793 if (!info)
794 return -ENOMEM;
795
796 par = info->par;
797 par->info = info;
798 par->board = board;
799 par->recover = auok190x_recover;
800 par->update_partial = init->update_partial;
801 par->update_all = init->update_all;
802 par->need_refresh = init->need_refresh;
803 par->init = init->init;
804
805 /* init update modes */
806 par->update_cnt = 0;
807 par->update_mode = -1;
808 par->last_mode = -1;
809 par->flash = 0;
810
811 par->regulator = regulator_get(info->device, "vdd");
812 if (IS_ERR(par->regulator)) {
813 ret = PTR_ERR(par->regulator);
814 dev_err(info->device, "Failed to get regulator: %d\n", ret);
815 goto err_reg;
816 }
817
818 ret = board->init(par);
819 if (ret) {
820 dev_err(info->device, "board init failed, %d\n", ret);
821 goto err_board;
822 }
823
824 ret = gpio_request(board->gpio_nsleep, "AUOK190x sleep");
825 if (ret) {
826 dev_err(info->device, "could not request sleep gpio, %d\n",
827 ret);
828 goto err_gpio1;
829 }
830
831 ret = gpio_direction_output(board->gpio_nsleep, 0);
832 if (ret) {
833 dev_err(info->device, "could not set sleep gpio, %d\n", ret);
834 goto err_gpio2;
835 }
836
837 ret = gpio_request(board->gpio_nrst, "AUOK190x reset");
838 if (ret) {
839 dev_err(info->device, "could not request reset gpio, %d\n",
840 ret);
841 goto err_gpio2;
842 }
843
844 ret = gpio_direction_output(board->gpio_nrst, 0);
845 if (ret) {
846 dev_err(info->device, "could not set reset gpio, %d\n", ret);
847 goto err_gpio3;
848 }
849
850 ret = auok190x_power(par, 1);
851 if (ret) {
852 dev_err(info->device, "could not power on the device, %d\n",
853 ret);
854 goto err_gpio3;
855 }
856
857 mutex_init(&par->io_lock);
858
859 init_waitqueue_head(&par->waitq);
860
861 ret = par->board->setup_irq(par->info);
862 if (ret) {
863 dev_err(info->device, "could not setup ready-irq, %d\n", ret);
864 goto err_irq;
865 }
866
867 /* wait for init to complete */
868 par->board->wait_for_rdy(par);
869
870 /*
871 * From here on the controller can talk to us
872 */
873
874 /* initialise fix, var, resolution and rotation */
875
876 strlcpy(info->fix.id, init->id, 16);
877 info->fix.type = FB_TYPE_PACKED_PIXELS;
878 info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
879 info->fix.xpanstep = 0;
880 info->fix.ypanstep = 0;
881 info->fix.ywrapstep = 0;
882 info->fix.accel = FB_ACCEL_NONE;
883
884 info->var.bits_per_pixel = 8;
885 info->var.grayscale = 1;
886 info->var.red.length = 8;
887 info->var.green.length = 8;
888 info->var.blue.length = 8;
889
890 panel = &panel_table[board->resolution];
891
892 /* if 90 degree rotation, switch width and height */
893 if (board->rotation & 1) {
894 info->var.xres = panel->h;
895 info->var.yres = panel->w;
896 info->var.xres_virtual = panel->h;
897 info->var.yres_virtual = panel->w;
898 info->fix.line_length = panel->h;
899 } else {
900 info->var.xres = panel->w;
901 info->var.yres = panel->h;
902 info->var.xres_virtual = panel->w;
903 info->var.yres_virtual = panel->h;
904 info->fix.line_length = panel->w;
905 }
906
907 par->resolution = board->resolution;
908 par->rotation = board->rotation;
909
910 /* videomemory handling */
911
912 videomemorysize = roundup((panel->w * panel->h), PAGE_SIZE);
913 videomemory = vmalloc(videomemorysize);
914 if (!videomemory) {
915 ret = -ENOMEM;
916 goto err_irq;
917 }
918
919 memset(videomemory, 0, videomemorysize);
920 info->screen_base = (char *)videomemory;
921 info->fix.smem_len = videomemorysize;
922
923 info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
924 info->fbops = &auok190xfb_ops;
925
926 /* deferred io init */
927
928 info->fbdefio = devm_kzalloc(info->device,
929 sizeof(struct fb_deferred_io),
930 GFP_KERNEL);
931 if (!info->fbdefio) {
932 dev_err(info->device, "Failed to allocate memory\n");
933 ret = -ENOMEM;
934 goto err_defio;
935 }
936
937 dev_dbg(info->device, "targetting %d frames per second\n", board->fps);
938 info->fbdefio->delay = HZ / board->fps;
939 info->fbdefio->first_io = auok190xfb_dpy_first_io,
940 info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io,
941 fb_deferred_io_init(info);
942
943 /* color map */
944
945 ret = fb_alloc_cmap(&info->cmap, 256, 0);
946 if (ret < 0) {
947 dev_err(info->device, "Failed to allocate colormap\n");
948 goto err_cmap;
949 }
950
951 /* controller init */
952
953 par->consecutive_threshold = 100;
954 par->init(par);
955 auok190x_identify(par);
956
957 platform_set_drvdata(pdev, info);
958
959 ret = register_framebuffer(info);
960 if (ret < 0)
961 goto err_regfb;
962
963 ret = sysfs_create_group(&info->device->kobj, &auok190x_attr_group);
964 if (ret)
965 goto err_sysfs;
966
967 dev_info(info->device, "fb%d: %dx%d using %dK of video memory\n",
968 info->node, info->var.xres, info->var.yres,
969 videomemorysize >> 10);
970
971 /* increase autosuspend_delay when we use alternative methods
972 * for runtime_pm
973 */
974 par->autosuspend_delay = (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN)
975 ? 1000 : 200;
976
977 pm_runtime_set_active(info->device);
978 pm_runtime_enable(info->device);
979 pm_runtime_set_autosuspend_delay(info->device, par->autosuspend_delay);
980 pm_runtime_use_autosuspend(info->device);
981
982 return 0;
983
984err_sysfs:
985 unregister_framebuffer(info);
986err_regfb:
987 fb_dealloc_cmap(&info->cmap);
988err_cmap:
989 fb_deferred_io_cleanup(info);
990 kfree(info->fbdefio);
991err_defio:
992 vfree((void *)info->screen_base);
993err_irq:
994 auok190x_power(par, 0);
995err_gpio3:
996 gpio_free(board->gpio_nrst);
997err_gpio2:
998 gpio_free(board->gpio_nsleep);
999err_gpio1:
1000 board->cleanup(par);
1001err_board:
1002 regulator_put(par->regulator);
1003err_reg:
1004 framebuffer_release(info);
1005
1006 return ret;
1007}
1008EXPORT_SYMBOL_GPL(auok190x_common_probe);
1009
1010int __devexit auok190x_common_remove(struct platform_device *pdev)
1011{
1012 struct fb_info *info = platform_get_drvdata(pdev);
1013 struct auok190xfb_par *par = info->par;
1014 struct auok190x_board *board = par->board;
1015
1016 pm_runtime_disable(info->device);
1017
1018 sysfs_remove_group(&info->device->kobj, &auok190x_attr_group);
1019
1020 unregister_framebuffer(info);
1021
1022 fb_dealloc_cmap(&info->cmap);
1023
1024 fb_deferred_io_cleanup(info);
1025 kfree(info->fbdefio);
1026
1027 vfree((void *)info->screen_base);
1028
1029 auok190x_power(par, 0);
1030
1031 gpio_free(board->gpio_nrst);
1032 gpio_free(board->gpio_nsleep);
1033
1034 board->cleanup(par);
1035
1036 regulator_put(par->regulator);
1037
1038 framebuffer_release(info);
1039
1040 return 0;
1041}
1042EXPORT_SYMBOL_GPL(auok190x_common_remove);
1043
1044MODULE_DESCRIPTION("Common code for AUO-K190X controllers");
1045MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
1046MODULE_LICENSE("GPL");