Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1 | # |
Jean Delvare | 060b2f5 | 2006-06-12 21:55:28 +0200 | [diff] [blame] | 2 | # Hardware monitoring chip drivers configuration |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 3 | # |
| 4 | |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 5 | menuconfig HWMON |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 6 | tristate "Hardware Monitoring support" |
Martin Schwidefsky | e25df12 | 2007-05-10 15:45:57 +0200 | [diff] [blame] | 7 | depends on HAS_IOMEM |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 8 | default y |
| 9 | help |
| 10 | Hardware monitoring devices let you monitor the hardware health |
| 11 | of a system. Most modern motherboards include such a device. It |
| 12 | can include temperature sensors, voltage sensors, fan speed |
| 13 | sensors and various additional features such as the ability to |
Mark M. Hoffman | 1236441 | 2005-07-15 21:38:08 -0400 | [diff] [blame] | 14 | control the speed of the fans. If you want this support you |
| 15 | should say Y here and also to the specific driver(s) for your |
| 16 | sensors chip(s) below. |
| 17 | |
Jean Delvare | 0d0001d | 2006-04-25 14:23:01 +0200 | [diff] [blame] | 18 | To find out which specific driver(s) you need, use the |
| 19 | sensors-detect script from the lm_sensors package. Read |
| 20 | <file:Documentation/hwmon/userspace-tools> for details. |
| 21 | |
Mark M. Hoffman | 1236441 | 2005-07-15 21:38:08 -0400 | [diff] [blame] | 22 | This support can also be built as a module. If so, the module |
| 23 | will be called hwmon. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 24 | |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 25 | if HWMON |
| 26 | |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 27 | config HWMON_VID |
| 28 | tristate |
| 29 | default n |
| 30 | |
Jean Delvare | 61cba5c | 2009-09-15 17:18:13 +0200 | [diff] [blame] | 31 | config HWMON_DEBUG_CHIP |
| 32 | bool "Hardware Monitoring Chip debugging messages" |
| 33 | default n |
| 34 | help |
| 35 | Say Y here if you want the I2C chip drivers to produce a bunch of |
| 36 | debug messages to the system log. Select this if you are having |
| 37 | a problem with I2C support and want to see more of what is going |
| 38 | on. |
| 39 | |
| 40 | comment "Native drivers" |
| 41 | |
Hans de Goede | f2b84bb | 2006-06-04 20:22:24 +0200 | [diff] [blame] | 42 | config SENSORS_ABITUGURU |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 43 | tristate "Abit uGuru (rev 1 & 2)" |
Jean Delvare | ec693fe | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 44 | depends on X86 && DMI && EXPERIMENTAL |
Hans de Goede | f2b84bb | 2006-06-04 20:22:24 +0200 | [diff] [blame] | 45 | help |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 46 | If you say yes here you get support for the sensor part of the first |
| 47 | and second revision of the Abit uGuru chip. The voltage and frequency |
| 48 | control parts of the Abit uGuru are not supported. The Abit uGuru |
| 49 | chip can be found on Abit uGuru featuring motherboards (most modern |
| 50 | Abit motherboards from before end 2005). For more info and a list |
| 51 | of which motherboards have which revision see |
| 52 | Documentation/hwmon/abituguru |
Hans de Goede | f2b84bb | 2006-06-04 20:22:24 +0200 | [diff] [blame] | 53 | |
| 54 | This driver can also be built as a module. If so, the module |
| 55 | will be called abituguru. |
| 56 | |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 57 | config SENSORS_ABITUGURU3 |
| 58 | tristate "Abit uGuru (rev 3)" |
Jean Delvare | ec693fe | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 59 | depends on X86 && DMI && EXPERIMENTAL |
Hans de Goede | 3faa1ff | 2007-06-17 00:28:45 +0200 | [diff] [blame] | 60 | help |
| 61 | If you say yes here you get support for the sensor part of the |
| 62 | third revision of the Abit uGuru chip. Only reading the sensors |
| 63 | and their settings is supported. The third revision of the Abit |
| 64 | uGuru chip can be found on recent Abit motherboards (since end |
| 65 | 2005). For more info and a list of which motherboards have which |
| 66 | revision see Documentation/hwmon/abituguru3 |
| 67 | |
| 68 | This driver can also be built as a module. If so, the module |
| 69 | will be called abituguru3. |
| 70 | |
Jonathan Cameron | 4f3a659 | 2011-09-29 12:50:04 -0400 | [diff] [blame] | 71 | config SENSORS_AD7314 |
| 72 | tristate "Analog Devices AD7314 and compatibles" |
| 73 | depends on SPI && EXPERIMENTAL |
| 74 | help |
| 75 | If you say yes here you get support for the Analog Devices |
| 76 | AD7314, ADT7301 and ADT7302 temperature sensors. |
| 77 | |
| 78 | This driver can also be built as a module. If so, the module |
| 79 | will be called ad7314. |
| 80 | |
Sean MacLennan | 6c633c3 | 2008-08-06 22:41:05 +0200 | [diff] [blame] | 81 | config SENSORS_AD7414 |
| 82 | tristate "Analog Devices AD7414" |
| 83 | depends on I2C && EXPERIMENTAL |
| 84 | help |
| 85 | If you say yes here you get support for the Analog Devices |
| 86 | AD7414 temperature monitoring chip. |
| 87 | |
| 88 | This driver can also be built as a module. If so, the module |
| 89 | will be called ad7414. |
| 90 | |
Alessandro Zummo | 2d8dd65 | 2007-05-08 17:22:02 +0200 | [diff] [blame] | 91 | config SENSORS_AD7418 |
| 92 | tristate "Analog Devices AD7416, AD7417 and AD7418" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 93 | depends on I2C && EXPERIMENTAL |
Alessandro Zummo | 2d8dd65 | 2007-05-08 17:22:02 +0200 | [diff] [blame] | 94 | help |
| 95 | If you say yes here you get support for the Analog Devices |
| 96 | AD7416, AD7417 and AD7418 temperature monitoring chips. |
| 97 | |
| 98 | This driver can also be built as a module. If so, the module |
| 99 | will be called ad7418. |
| 100 | |
Marc Pignat | d42139a | 2008-08-15 00:40:34 -0700 | [diff] [blame] | 101 | config SENSORS_ADCXX |
| 102 | tristate "National Semiconductor ADCxxxSxxx" |
| 103 | depends on SPI_MASTER && EXPERIMENTAL |
| 104 | help |
| 105 | If you say yes here you get support for the National Semiconductor |
| 106 | ADC<bb><c>S<sss> chip family, where |
| 107 | * bb is the resolution in number of bits (8, 10, 12) |
| 108 | * c is the number of channels (1, 2, 4, 8) |
| 109 | * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 |
| 110 | kSPS and 101 for 1 MSPS) |
| 111 | |
| 112 | Examples : ADC081S101, ADC124S501, ... |
| 113 | |
| 114 | This driver can also be built as a module. If so, the module |
| 115 | will be called adcxx. |
| 116 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 117 | config SENSORS_ADM1021 |
| 118 | tristate "Analog Devices ADM1021 and compatibles" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 119 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 120 | help |
| 121 | If you say yes here you get support for Analog Devices ADM1021 |
| 122 | and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, |
Jean Delvare | d7ce033 | 2011-04-29 16:33:36 +0200 | [diff] [blame] | 123 | Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 124 | |
| 125 | This driver can also be built as a module. If so, the module |
| 126 | will be called adm1021. |
| 127 | |
| 128 | config SENSORS_ADM1025 |
| 129 | tristate "Analog Devices ADM1025 and compatibles" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 130 | depends on I2C |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 131 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 132 | help |
| 133 | If you say yes here you get support for Analog Devices ADM1025 |
| 134 | and Philips NE1619 sensor chips. |
| 135 | |
| 136 | This driver can also be built as a module. If so, the module |
| 137 | will be called adm1025. |
| 138 | |
| 139 | config SENSORS_ADM1026 |
| 140 | tristate "Analog Devices ADM1026 and compatibles" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 141 | depends on I2C |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 142 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 143 | help |
| 144 | If you say yes here you get support for Analog Devices ADM1026 |
| 145 | sensor chip. |
| 146 | |
| 147 | This driver can also be built as a module. If so, the module |
| 148 | will be called adm1026. |
| 149 | |
Corentin Labbe | cae2caa | 2007-02-14 21:15:04 +0100 | [diff] [blame] | 150 | config SENSORS_ADM1029 |
| 151 | tristate "Analog Devices ADM1029" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 152 | depends on I2C |
Corentin Labbe | cae2caa | 2007-02-14 21:15:04 +0100 | [diff] [blame] | 153 | help |
| 154 | If you say yes here you get support for Analog Devices ADM1029 |
| 155 | sensor chip. |
| 156 | Very rare chip, please let us know you use it. |
| 157 | |
| 158 | This driver can also be built as a module. If so, the module |
| 159 | will be called adm1029. |
| 160 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 161 | config SENSORS_ADM1031 |
| 162 | tristate "Analog Devices ADM1031 and compatibles" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 163 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 164 | help |
| 165 | If you say yes here you get support for Analog Devices ADM1031 |
| 166 | and ADM1030 sensor chips. |
| 167 | |
| 168 | This driver can also be built as a module. If so, the module |
| 169 | will be called adm1031. |
| 170 | |
| 171 | config SENSORS_ADM9240 |
| 172 | tristate "Analog Devices ADM9240 and compatibles" |
Grant Coady | 68f823d | 2008-08-06 22:41:05 +0200 | [diff] [blame] | 173 | depends on I2C |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 174 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 175 | help |
| 176 | If you say yes here you get support for Analog Devices ADM9240, |
| 177 | Dallas DS1780, National Semiconductor LM81 sensor chips. |
| 178 | |
| 179 | This driver can also be built as a module. If so, the module |
| 180 | will be called adm9240. |
| 181 | |
Wolfram Sang | d84ca5b | 2010-03-05 22:17:23 +0100 | [diff] [blame] | 182 | config SENSORS_ADT7411 |
| 183 | tristate "Analog Devices ADT7411" |
| 184 | depends on I2C && EXPERIMENTAL |
| 185 | help |
| 186 | If you say yes here you get support for the Analog Devices |
| 187 | ADT7411 voltage and temperature monitoring chip. |
| 188 | |
| 189 | This driver can also be built as a module. If so, the module |
| 190 | will be called adt7411. |
| 191 | |
Darrick J. Wong | c0b4e3a | 2008-11-12 13:27:03 -0800 | [diff] [blame] | 192 | config SENSORS_ADT7462 |
| 193 | tristate "Analog Devices ADT7462" |
| 194 | depends on I2C && EXPERIMENTAL |
| 195 | help |
| 196 | If you say yes here you get support for the Analog Devices |
| 197 | ADT7462 temperature monitoring chips. |
| 198 | |
| 199 | This driver can also be built as a module. If so, the module |
| 200 | will be called adt7462. |
| 201 | |
Darrick J. Wong | 6f9703d | 2007-07-31 11:06:52 -0700 | [diff] [blame] | 202 | config SENSORS_ADT7470 |
| 203 | tristate "Analog Devices ADT7470" |
| 204 | depends on I2C && EXPERIMENTAL |
| 205 | help |
| 206 | If you say yes here you get support for the Analog Devices |
| 207 | ADT7470 temperature monitoring chips. |
| 208 | |
| 209 | This driver can also be built as a module. If so, the module |
| 210 | will be called adt7470. |
| 211 | |
Jordan Crouse | 1c301fc | 2009-01-15 22:27:47 +0100 | [diff] [blame] | 212 | config SENSORS_ADT7475 |
Jean Delvare | d8d2ee0 | 2009-12-09 20:36:08 +0100 | [diff] [blame] | 213 | tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 214 | depends on I2C |
Jean Delvare | 54fe467 | 2009-12-09 20:36:08 +0100 | [diff] [blame] | 215 | select HWMON_VID |
Jordan Crouse | 1c301fc | 2009-01-15 22:27:47 +0100 | [diff] [blame] | 216 | help |
| 217 | If you say yes here you get support for the Analog Devices |
Jean Delvare | d8d2ee0 | 2009-12-09 20:36:08 +0100 | [diff] [blame] | 218 | ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring |
| 219 | chips. |
Jordan Crouse | 1c301fc | 2009-01-15 22:27:47 +0100 | [diff] [blame] | 220 | |
| 221 | This driver can also be build as a module. If so, the module |
| 222 | will be called adt7475. |
| 223 | |
George Joseph | d58de03 | 2010-03-05 22:17:25 +0100 | [diff] [blame] | 224 | config SENSORS_ASC7621 |
| 225 | tristate "Andigilog aSC7621" |
Jean Delvare | 9854f97 | 2011-05-25 20:43:32 +0200 | [diff] [blame] | 226 | depends on I2C |
George Joseph | d58de03 | 2010-03-05 22:17:25 +0100 | [diff] [blame] | 227 | help |
| 228 | If you say yes here you get support for the aSC7621 |
Jaswinder Singh Rajput | b00d8a7 | 2010-03-29 22:03:06 +0200 | [diff] [blame] | 229 | family of SMBus sensors chip found on most Intel X38, X48, X58, |
| 230 | 945, 965 and 975 desktop boards. Currently supported chips: |
George Joseph | d58de03 | 2010-03-05 22:17:25 +0100 | [diff] [blame] | 231 | aSC7621 |
| 232 | aSC7621a |
| 233 | |
| 234 | This driver can also be built as a module. If so, the module |
| 235 | will be called asc7621. |
| 236 | |
Rudolf Marek | 29fa06c | 2006-08-28 14:40:17 +0200 | [diff] [blame] | 237 | config SENSORS_K8TEMP |
Rudolf Marek | 4660cb3 | 2006-10-08 22:01:26 +0200 | [diff] [blame] | 238 | tristate "AMD Athlon64/FX or Opteron temperature sensor" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 239 | depends on X86 && PCI && EXPERIMENTAL |
Rudolf Marek | 29fa06c | 2006-08-28 14:40:17 +0200 | [diff] [blame] | 240 | help |
| 241 | If you say yes here you get support for the temperature |
Rudolf Marek | 4660cb3 | 2006-10-08 22:01:26 +0200 | [diff] [blame] | 242 | sensor(s) inside your CPU. Supported is whole AMD K8 |
| 243 | microarchitecture. Please note that you will need at least |
| 244 | lm-sensors 2.10.1 for proper userspace support. |
Rudolf Marek | 29fa06c | 2006-08-28 14:40:17 +0200 | [diff] [blame] | 245 | |
| 246 | This driver can also be built as a module. If so, the module |
| 247 | will be called k8temp. |
| 248 | |
Clemens Ladisch | 3c57e89 | 2009-12-16 21:38:25 +0100 | [diff] [blame] | 249 | config SENSORS_K10TEMP |
Andre Przywara | 9e58131 | 2011-05-25 20:43:31 +0200 | [diff] [blame] | 250 | tristate "AMD Family 10h+ temperature sensor" |
Clemens Ladisch | 3c57e89 | 2009-12-16 21:38:25 +0100 | [diff] [blame] | 251 | depends on X86 && PCI |
| 252 | help |
| 253 | If you say yes here you get support for the temperature |
| 254 | sensor(s) inside your CPU. Supported are later revisions of |
Clemens Ladisch | aa4790a | 2011-02-17 03:22:40 -0500 | [diff] [blame] | 255 | the AMD Family 10h and all revisions of the AMD Family 11h, |
Andre Przywara | fbc729a | 2012-03-30 16:48:20 -0400 | [diff] [blame] | 256 | 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity) |
| 257 | microarchitectures. |
Clemens Ladisch | 3c57e89 | 2009-12-16 21:38:25 +0100 | [diff] [blame] | 258 | |
| 259 | This driver can also be built as a module. If so, the module |
| 260 | will be called k10temp. |
| 261 | |
Andreas Herrmann | 512d102 | 2011-05-25 20:43:31 +0200 | [diff] [blame] | 262 | config SENSORS_FAM15H_POWER |
| 263 | tristate "AMD Family 15h processor power" |
| 264 | depends on X86 && PCI |
| 265 | help |
| 266 | If you say yes here you get support for processor power |
| 267 | information of your AMD family 15h CPU. |
| 268 | |
| 269 | This driver can also be built as a module. If so, the module |
| 270 | will be called fam15h_power. |
| 271 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 272 | config SENSORS_ASB100 |
| 273 | tristate "Asus ASB100 Bach" |
Jean Delvare | dabf375 | 2007-08-29 12:19:00 +0200 | [diff] [blame] | 274 | depends on X86 && I2C && EXPERIMENTAL |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 275 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 276 | help |
| 277 | If you say yes here you get support for the ASB100 Bach sensor |
| 278 | chip found on some Asus mainboards. |
| 279 | |
| 280 | This driver can also be built as a module. If so, the module |
| 281 | will be called asb100. |
| 282 | |
| 283 | config SENSORS_ATXP1 |
| 284 | tristate "Attansic ATXP1 VID controller" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 285 | depends on I2C && EXPERIMENTAL |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 286 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 287 | help |
| 288 | If you say yes here you get support for the Attansic ATXP1 VID |
| 289 | controller. |
| 290 | |
| 291 | If your board have such a chip, you are able to control your CPU |
| 292 | core and other voltages. |
| 293 | |
| 294 | This driver can also be built as a module. If so, the module |
| 295 | will be called atxp1. |
| 296 | |
Roland Stigge | 6099469 | 2011-01-09 09:31:39 -0500 | [diff] [blame] | 297 | config SENSORS_DS620 |
| 298 | tristate "Dallas Semiconductor DS620" |
| 299 | depends on I2C |
| 300 | help |
| 301 | If you say yes here you get support for Dallas Semiconductor |
| 302 | DS620 sensor chip. |
| 303 | |
| 304 | This driver can also be built as a module. If so, the module |
| 305 | will be called ds620. |
| 306 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 307 | config SENSORS_DS1621 |
| 308 | tristate "Dallas Semiconductor DS1621 and DS1625" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 309 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 310 | help |
| 311 | If you say yes here you get support for Dallas Semiconductor |
| 312 | DS1621 and DS1625 sensor chips. |
| 313 | |
| 314 | This driver can also be built as a module. If so, the module |
| 315 | will be called ds1621. |
| 316 | |
Donggeun Kim | 9d97e5c | 2011-09-07 18:49:08 +0900 | [diff] [blame] | 317 | config SENSORS_EXYNOS4_TMU |
| 318 | tristate "Temperature sensor on Samsung EXYNOS4" |
Donggeun Kim | 3627902 | 2011-11-17 05:33:05 -0500 | [diff] [blame] | 319 | depends on ARCH_EXYNOS4 |
Donggeun Kim | 9d97e5c | 2011-09-07 18:49:08 +0900 | [diff] [blame] | 320 | help |
Masanari Iida | 6b2aac4 | 2012-04-14 00:14:11 +0900 | [diff] [blame] | 321 | If you say yes here you get support for TMU (Thermal Management |
Donggeun Kim | 9d97e5c | 2011-09-07 18:49:08 +0900 | [diff] [blame] | 322 | Unit) on SAMSUNG EXYNOS4 series of SoC. |
| 323 | |
| 324 | This driver can also be built as a module. If so, the module |
| 325 | will be called exynos4-tmu. |
| 326 | |
Darrick J. Wong | 298c752 | 2007-10-18 13:22:43 -0700 | [diff] [blame] | 327 | config SENSORS_I5K_AMB |
| 328 | tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" |
| 329 | depends on PCI && EXPERIMENTAL |
| 330 | help |
| 331 | If you say yes here you get support for FB-DIMM AMB temperature |
| 332 | monitoring chips on systems with the Intel 5000 series chipset. |
| 333 | |
| 334 | This driver can also be built as a module. If so, the module |
| 335 | will be called i5k_amb. |
| 336 | |
Jean Delvare | e53004e | 2006-01-09 23:26:14 +0100 | [diff] [blame] | 337 | config SENSORS_F71805F |
Jean Delvare | 9cab021 | 2007-07-15 10:36:06 +0200 | [diff] [blame] | 338 | tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 339 | depends on !PPC |
Jean Delvare | e53004e | 2006-01-09 23:26:14 +0100 | [diff] [blame] | 340 | help |
| 341 | If you say yes here you get support for hardware monitoring |
Jean Delvare | 9cab021 | 2007-07-15 10:36:06 +0200 | [diff] [blame] | 342 | features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG |
| 343 | Super-I/O chips. |
Jean Delvare | e53004e | 2006-01-09 23:26:14 +0100 | [diff] [blame] | 344 | |
| 345 | This driver can also be built as a module. If so, the module |
| 346 | will be called f71805f. |
| 347 | |
Hans de Goede | 45fb366 | 2007-07-13 14:34:19 +0200 | [diff] [blame] | 348 | config SENSORS_F71882FG |
Jean Delvare | 5d7f77b | 2011-03-26 10:45:02 +0100 | [diff] [blame] | 349 | tristate "Fintek F71882FG and compatibles" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 350 | depends on !PPC |
Hans de Goede | 45fb366 | 2007-07-13 14:34:19 +0200 | [diff] [blame] | 351 | help |
Andrew Morton | f2e41e9 | 2010-08-19 14:13:31 -0700 | [diff] [blame] | 352 | If you say yes here you get support for hardware monitoring |
Jean Delvare | 5d7f77b | 2011-03-26 10:45:02 +0100 | [diff] [blame] | 353 | features of many Fintek Super-I/O (LPC) chips. The currently |
| 354 | supported chips are: |
Hans de Goede | 629c58b | 2011-05-25 20:43:32 +0200 | [diff] [blame] | 355 | F71808E/A |
Jean Delvare | 5d7f77b | 2011-03-26 10:45:02 +0100 | [diff] [blame] | 356 | F71858FG |
| 357 | F71862FG |
| 358 | F71863FG |
Hans de Goede | 5da556e | 2011-07-03 13:32:53 +0200 | [diff] [blame] | 359 | F71869F/E/A |
Jean Delvare | 5d7f77b | 2011-03-26 10:45:02 +0100 | [diff] [blame] | 360 | F71882FG |
| 361 | F71883FG |
Hans de Goede | a66c108 | 2011-03-26 10:45:02 +0100 | [diff] [blame] | 362 | F71889FG/ED/A |
Jean Delvare | 5d7f77b | 2011-03-26 10:45:02 +0100 | [diff] [blame] | 363 | F8000 |
| 364 | F81801U |
Jean Delvare | 383586b | 2011-03-26 10:45:02 +0100 | [diff] [blame] | 365 | F81865F |
Hans de Goede | 45fb366 | 2007-07-13 14:34:19 +0200 | [diff] [blame] | 366 | |
| 367 | This driver can also be built as a module. If so, the module |
| 368 | will be called f71882fg. |
| 369 | |
Riku Voipio | 84f1e44 | 2007-08-24 13:03:09 +0300 | [diff] [blame] | 370 | config SENSORS_F75375S |
Björn Gerhart | f58c44e | 2011-12-13 13:19:58 -0500 | [diff] [blame] | 371 | tristate "Fintek F75375S/SP, F75373 and F75387" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 372 | depends on I2C |
Riku Voipio | 84f1e44 | 2007-08-24 13:03:09 +0300 | [diff] [blame] | 373 | help |
| 374 | If you say yes here you get support for hardware monitoring |
Björn Gerhart | f58c44e | 2011-12-13 13:19:58 -0500 | [diff] [blame] | 375 | features of the Fintek F75375S/SP, F75373 and F75387 |
Riku Voipio | 84f1e44 | 2007-08-24 13:03:09 +0300 | [diff] [blame] | 376 | |
| 377 | This driver can also be built as a module. If so, the module |
| 378 | will be called f75375s. |
| 379 | |
Hans de Goede | 569ff10 | 2007-10-11 08:06:29 -0400 | [diff] [blame] | 380 | config SENSORS_FSCHMD |
Hans de Goede | c69ab2b | 2009-03-30 21:46:45 +0200 | [diff] [blame] | 381 | tristate "Fujitsu Siemens Computers sensor chips" |
Hans de Goede | 0589c2d | 2009-01-07 16:37:33 +0100 | [diff] [blame] | 382 | depends on X86 && I2C |
Hans de Goede | 569ff10 | 2007-10-11 08:06:29 -0400 | [diff] [blame] | 383 | help |
Hans de Goede | c69ab2b | 2009-03-30 21:46:45 +0200 | [diff] [blame] | 384 | If you say yes here you get support for the following Fujitsu |
| 385 | Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, |
Hans de Goede | de15f09 | 2009-03-30 21:46:45 +0200 | [diff] [blame] | 386 | Heimdall, Heracles, Hades and Syleus including support for the |
| 387 | integrated watchdog. |
Hans de Goede | 569ff10 | 2007-10-11 08:06:29 -0400 | [diff] [blame] | 388 | |
Hans de Goede | 0589c2d | 2009-01-07 16:37:33 +0100 | [diff] [blame] | 389 | This is a merged driver for FSC sensor chips replacing the fscpos, |
| 390 | fscscy and fscher drivers and adding support for several other FSC |
| 391 | sensor chips. |
Hans de Goede | 569ff10 | 2007-10-11 08:06:29 -0400 | [diff] [blame] | 392 | |
| 393 | This driver can also be built as a module. If so, the module |
| 394 | will be called fschmd. |
| 395 | |
Herbert Valerio Riedel | 3bcfa9e | 2009-04-06 19:00:30 -0700 | [diff] [blame] | 396 | config SENSORS_G760A |
| 397 | tristate "GMT G760A" |
| 398 | depends on I2C |
| 399 | help |
| 400 | If you say yes here you get support for Global Mixed-mode |
| 401 | Technology Inc G760A fan speed PWM controller chips. |
| 402 | |
| 403 | This driver can also be built as a module. If so, the module |
| 404 | will be called g760a. |
| 405 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 406 | config SENSORS_GL518SM |
| 407 | tristate "Genesys Logic GL518SM" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 408 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 409 | help |
| 410 | If you say yes here you get support for Genesys Logic GL518SM |
| 411 | sensor chips. |
| 412 | |
| 413 | This driver can also be built as a module. If so, the module |
| 414 | will be called gl518sm. |
| 415 | |
| 416 | config SENSORS_GL520SM |
| 417 | tristate "Genesys Logic GL520SM" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 418 | depends on I2C |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 419 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 420 | help |
| 421 | If you say yes here you get support for Genesys Logic GL520SM |
| 422 | sensor chips. |
| 423 | |
| 424 | This driver can also be built as a module. If so, the module |
| 425 | will be called gl520sm. |
| 426 | |
Simon Guinot | d6fe136 | 2010-10-22 00:44:19 +0200 | [diff] [blame] | 427 | config SENSORS_GPIO_FAN |
| 428 | tristate "GPIO fan" |
Guenter Roeck | c1a1260 | 2012-03-20 23:06:34 -0400 | [diff] [blame] | 429 | depends on GPIOLIB |
Simon Guinot | d6fe136 | 2010-10-22 00:44:19 +0200 | [diff] [blame] | 430 | help |
| 431 | If you say yes here you get support for fans connected to GPIO lines. |
| 432 | |
| 433 | This driver can also be built as a module. If so, the module |
| 434 | will be called gpio-fan. |
| 435 | |
Rudolf Marek | bebe467 | 2007-05-08 17:22:02 +0200 | [diff] [blame] | 436 | config SENSORS_CORETEMP |
Rudolf Marek | 708a62b | 2009-09-23 22:59:42 +0200 | [diff] [blame] | 437 | tristate "Intel Core/Core2/Atom temperature sensor" |
Yong Wang | 1fe63ab | 2010-01-10 20:52:34 +0100 | [diff] [blame] | 438 | depends on X86 && PCI && EXPERIMENTAL |
Rudolf Marek | bebe467 | 2007-05-08 17:22:02 +0200 | [diff] [blame] | 439 | help |
| 440 | If you say yes here you get support for the temperature |
Rudolf Marek | 708a62b | 2009-09-23 22:59:42 +0200 | [diff] [blame] | 441 | sensor inside your CPU. Most of the family 6 CPUs |
Chen Gong | f3cffe4 | 2010-08-09 17:21:10 -0700 | [diff] [blame] | 442 | are supported. Check Documentation/hwmon/coretemp for details. |
Rudolf Marek | bebe467 | 2007-05-08 17:22:02 +0200 | [diff] [blame] | 443 | |
Darrick J. Wong | 8808a79 | 2008-05-23 13:04:25 -0700 | [diff] [blame] | 444 | config SENSORS_IBMAEM |
| 445 | tristate "IBM Active Energy Manager temperature/power sensors and control" |
| 446 | select IPMI_SI |
| 447 | depends on IPMI_HANDLER |
| 448 | help |
| 449 | If you say yes here you get support for the temperature and |
| 450 | power sensors and capping hardware in various IBM System X |
| 451 | servers that support Active Energy Manager. This includes |
| 452 | the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, |
Darrick J. Wong | 8070408 | 2009-06-15 18:39:46 +0200 | [diff] [blame] | 453 | and certain HC10/HS2x/LS2x/QS2x blades. |
Darrick J. Wong | 8808a79 | 2008-05-23 13:04:25 -0700 | [diff] [blame] | 454 | |
| 455 | This driver can also be built as a module. If so, the module |
| 456 | will be called ibmaem. |
| 457 | |
Darrick J. Wong | 57c7c3a | 2007-09-14 12:33:46 -0700 | [diff] [blame] | 458 | config SENSORS_IBMPEX |
| 459 | tristate "IBM PowerExecutive temperature/power sensors" |
| 460 | select IPMI_SI |
| 461 | depends on IPMI_HANDLER |
| 462 | help |
| 463 | If you say yes here you get support for the temperature and |
| 464 | power sensors in various IBM System X servers that support |
Darrick J. Wong | 3d960a9 | 2008-03-19 17:00:48 -0700 | [diff] [blame] | 465 | PowerExecutive. So far this includes the x3350, x3550, x3650, |
| 466 | x3655, and x3755; the x3800, x3850, and x3950 models that have |
| 467 | PCI Express; and some of the HS2x, LS2x, and QS2x blades. |
Darrick J. Wong | 57c7c3a | 2007-09-14 12:33:46 -0700 | [diff] [blame] | 468 | |
| 469 | This driver can also be built as a module. If so, the module |
| 470 | will be called ibmpex. |
| 471 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 472 | config SENSORS_IT87 |
| 473 | tristate "ITE IT87xx and compatibles" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 474 | depends on !PPC |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 475 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 476 | help |
Jean Delvare | 87673dd | 2006-08-28 14:37:19 +0200 | [diff] [blame] | 477 | If you say yes here you get support for ITE IT8705F, IT8712F, |
Jean Delvare | 16b5dda | 2012-01-16 22:51:48 +0100 | [diff] [blame] | 478 | IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F and IT8758E |
| 479 | sensor chips, and the SiS960 clone. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 480 | |
| 481 | This driver can also be built as a module. If so, the module |
| 482 | will be called it87. |
| 483 | |
Lars-Peter Clausen | 7f983ba | 2010-06-19 18:32:58 +0000 | [diff] [blame] | 484 | config SENSORS_JZ4740 |
| 485 | tristate "Ingenic JZ4740 SoC ADC driver" |
| 486 | depends on MACH_JZ4740 && MFD_JZ4740_ADC |
| 487 | help |
| 488 | If you say yes here you get support for reading adc values from the ADCIN |
| 489 | pin on Ingenic JZ4740 SoC based boards. |
| 490 | |
| 491 | This driver can also be build as a module. If so, the module will be |
| 492 | called jz4740-hwmon. |
| 493 | |
Guenter Roeck | 4453d73 | 2010-08-09 17:21:08 -0700 | [diff] [blame] | 494 | config SENSORS_JC42 |
Clemens Ladisch | d5622f5 | 2011-02-16 08:02:08 -0500 | [diff] [blame] | 495 | tristate "JEDEC JC42.4 compliant memory module temperature sensors" |
Randy Dunlap | 4bd2691 | 2010-08-14 21:09:01 +0200 | [diff] [blame] | 496 | depends on I2C |
Guenter Roeck | 4453d73 | 2010-08-09 17:21:08 -0700 | [diff] [blame] | 497 | help |
Clemens Ladisch | d5622f5 | 2011-02-16 08:02:08 -0500 | [diff] [blame] | 498 | If you say yes here, you get support for JEDEC JC42.4 compliant |
| 499 | temperature sensors, which are used on many DDR3 memory modules for |
| 500 | mobile devices and servers. Support will include, but not be limited |
Guenter Roeck | 1bd612a | 2012-03-05 11:13:52 -0800 | [diff] [blame] | 501 | to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805, |
| 502 | MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002, |
| 503 | STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2. |
Guenter Roeck | 4453d73 | 2010-08-09 17:21:08 -0700 | [diff] [blame] | 504 | |
| 505 | This driver can also be built as a module. If so, the module |
| 506 | will be called jc42. |
| 507 | |
Guenter Roeck | 502b5a0 | 2010-09-29 20:12:08 -0700 | [diff] [blame] | 508 | config SENSORS_LINEAGE |
| 509 | tristate "Lineage Compact Power Line Power Entry Module" |
| 510 | depends on I2C && EXPERIMENTAL |
| 511 | help |
| 512 | If you say yes here you get support for the Lineage Compact Power Line |
| 513 | series of DC/DC and AC/DC converters such as CP1800, CP2000AC, |
| 514 | CP2000DC, CP2725, and others. |
| 515 | |
| 516 | This driver can also be built as a module. If so, the module |
| 517 | will be called lineage-pem. |
| 518 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 519 | config SENSORS_LM63 |
Guenter Roeck | 210961c | 2012-01-16 22:51:45 +0100 | [diff] [blame] | 520 | tristate "National Semiconductor LM63 and compatibles" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 521 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 522 | help |
Matthew Garrett | 10f2ed3 | 2010-05-27 19:58:38 +0200 | [diff] [blame] | 523 | If you say yes here you get support for the National |
Guenter Roeck | 210961c | 2012-01-16 22:51:45 +0100 | [diff] [blame] | 524 | Semiconductor LM63, LM64, and LM96163 remote diode digital temperature |
Matthew Garrett | 10f2ed3 | 2010-05-27 19:58:38 +0200 | [diff] [blame] | 525 | sensors with integrated fan control. Such chips are found |
| 526 | on the Tyan S4882 (Thunder K8QS Pro) motherboard, among |
| 527 | others. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 528 | |
| 529 | This driver can also be built as a module. If so, the module |
| 530 | will be called lm63. |
| 531 | |
Kaiwan N Billimoria | e1a8e91 | 2006-06-12 22:00:05 +0200 | [diff] [blame] | 532 | config SENSORS_LM70 |
Manuel Lauss | c8ac32e | 2009-01-07 16:37:34 +0100 | [diff] [blame] | 533 | tristate "National Semiconductor LM70 / Texas Instruments TMP121" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 534 | depends on SPI_MASTER |
Kaiwan N Billimoria | e1a8e91 | 2006-06-12 22:00:05 +0200 | [diff] [blame] | 535 | help |
| 536 | If you say yes here you get support for the National Semiconductor |
Manuel Lauss | c8ac32e | 2009-01-07 16:37:34 +0100 | [diff] [blame] | 537 | LM70 and Texas Instruments TMP121/TMP123 digital temperature |
| 538 | sensor chips. |
Kaiwan N Billimoria | e1a8e91 | 2006-06-12 22:00:05 +0200 | [diff] [blame] | 539 | |
| 540 | This driver can also be built as a module. If so, the module |
| 541 | will be called lm70. |
| 542 | |
Adrien Demarez | 4e233cb | 2009-12-09 20:35:50 +0100 | [diff] [blame] | 543 | config SENSORS_LM73 |
| 544 | tristate "National Semiconductor LM73" |
| 545 | depends on I2C |
| 546 | help |
| 547 | If you say yes here you get support for National Semiconductor LM73 |
| 548 | sensor chips. |
| 549 | This driver can also be built as a module. If so, the module |
| 550 | will be called lm73. |
| 551 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 552 | config SENSORS_LM75 |
| 553 | tristate "National Semiconductor LM75 and compatibles" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 554 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 555 | help |
David Brownell | 01a5239 | 2008-04-21 12:10:53 -0700 | [diff] [blame] | 556 | If you say yes here you get support for one common type of |
| 557 | temperature sensor chip, with models including: |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 558 | |
Michael Hennerich | e96f9d8 | 2011-10-13 04:43:31 -0400 | [diff] [blame] | 559 | - Analog Devices ADT75 |
David Brownell | 01a5239 | 2008-04-21 12:10:53 -0700 | [diff] [blame] | 560 | - Dallas Semiconductor DS75 and DS1775 |
| 561 | - Maxim MAX6625 and MAX6626 |
| 562 | - Microchip MCP980x |
Len Sorensen | 05e82fe | 2011-03-21 17:59:36 +0100 | [diff] [blame] | 563 | - National Semiconductor LM75, LM75A |
David Brownell | 01a5239 | 2008-04-21 12:10:53 -0700 | [diff] [blame] | 564 | - NXP's LM75A |
| 565 | - ST Microelectronics STDS75 |
| 566 | - TelCom (now Microchip) TCN75 |
Shubhrajyoti Datta | 6d03405 | 2010-05-27 19:59:03 +0200 | [diff] [blame] | 567 | - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, |
| 568 | TMP275 |
David Brownell | 01a5239 | 2008-04-21 12:10:53 -0700 | [diff] [blame] | 569 | |
David Brownell | 9ebd3d8 | 2008-05-03 19:33:15 -0700 | [diff] [blame] | 570 | This driver supports driver model based binding through board |
| 571 | specific I2C device tables. |
| 572 | |
| 573 | It also supports the "legacy" style of driver binding. To use |
| 574 | that with some chips which don't replicate LM75 quirks exactly, |
| 575 | you may need the "force" module parameter. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 576 | |
| 577 | This driver can also be built as a module. If so, the module |
| 578 | will be called lm75. |
| 579 | |
| 580 | config SENSORS_LM77 |
| 581 | tristate "National Semiconductor LM77" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 582 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 583 | help |
| 584 | If you say yes here you get support for National Semiconductor LM77 |
| 585 | sensor chips. |
| 586 | |
| 587 | This driver can also be built as a module. If so, the module |
| 588 | will be called lm77. |
| 589 | |
| 590 | config SENSORS_LM78 |
| 591 | tristate "National Semiconductor LM78 and compatibles" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 592 | depends on I2C |
Jean Delvare | 19f673e | 2005-07-31 22:12:09 +0200 | [diff] [blame] | 593 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 594 | help |
| 595 | If you say yes here you get support for National Semiconductor LM78, |
| 596 | LM78-J and LM79. |
| 597 | |
| 598 | This driver can also be built as a module. If so, the module |
| 599 | will be called lm78. |
| 600 | |
| 601 | config SENSORS_LM80 |
Jean Delvare | 9908ad4 | 2012-01-31 09:27:11 -0500 | [diff] [blame] | 602 | tristate "National Semiconductor LM80 and LM96080" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 603 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 604 | help |
| 605 | If you say yes here you get support for National Semiconductor |
Jean Delvare | 9908ad4 | 2012-01-31 09:27:11 -0500 | [diff] [blame] | 606 | LM80 and LM96080 sensor chips. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 607 | |
| 608 | This driver can also be built as a module. If so, the module |
| 609 | will be called lm80. |
| 610 | |
| 611 | config SENSORS_LM83 |
Jordan Crouse | 43cb7eb | 2006-03-23 16:19:49 +0100 | [diff] [blame] | 612 | tristate "National Semiconductor LM83 and compatibles" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 613 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 614 | help |
| 615 | If you say yes here you get support for National Semiconductor |
Jordan Crouse | 43cb7eb | 2006-03-23 16:19:49 +0100 | [diff] [blame] | 616 | LM82 and LM83 sensor chips. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 617 | |
| 618 | This driver can also be built as a module. If so, the module |
| 619 | will be called lm83. |
| 620 | |
| 621 | config SENSORS_LM85 |
| 622 | tristate "National Semiconductor LM85 and compatibles" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 623 | depends on I2C |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 624 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 625 | help |
| 626 | If you say yes here you get support for National Semiconductor LM85 |
Jean Delvare | c36364d | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 627 | sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, |
Jan Beulich | f065a93 | 2011-02-18 03:18:26 -0500 | [diff] [blame] | 628 | EMC6D101, EMC6D102, and EMC6D103. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 629 | |
| 630 | This driver can also be built as a module. If so, the module |
| 631 | will be called lm85. |
| 632 | |
| 633 | config SENSORS_LM87 |
Jean Delvare | c7fa373 | 2007-10-09 15:22:22 +0200 | [diff] [blame] | 634 | tristate "National Semiconductor LM87 and compatibles" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 635 | depends on I2C |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 636 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 637 | help |
| 638 | If you say yes here you get support for National Semiconductor LM87 |
Jean Delvare | c7fa373 | 2007-10-09 15:22:22 +0200 | [diff] [blame] | 639 | and Analog Devices ADM1024 sensor chips. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 640 | |
| 641 | This driver can also be built as a module. If so, the module |
| 642 | will be called lm87. |
| 643 | |
| 644 | config SENSORS_LM90 |
| 645 | tristate "National Semiconductor LM90 and compatibles" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 646 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 647 | help |
| 648 | If you say yes here you get support for National Semiconductor LM90, |
Guenter Roeck | 5a4e5e6 | 2011-04-29 16:33:35 +0200 | [diff] [blame] | 649 | LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, |
| 650 | Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, |
| 651 | MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, |
Guenter Roeck | ae544f6 | 2012-03-23 10:02:18 +0100 | [diff] [blame] | 652 | Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781 |
| 653 | sensor chips. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 654 | |
| 655 | This driver can also be built as a module. If so, the module |
| 656 | will be called lm90. |
| 657 | |
| 658 | config SENSORS_LM92 |
| 659 | tristate "National Semiconductor LM92 and compatibles" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 660 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 661 | help |
| 662 | If you say yes here you get support for National Semiconductor LM92 |
| 663 | and Maxim MAX6635 sensor chips. |
| 664 | |
| 665 | This driver can also be built as a module. If so, the module |
| 666 | will be called lm92. |
| 667 | |
Hans-Jürgen Koch | e46957e | 2007-07-05 17:58:29 +0200 | [diff] [blame] | 668 | config SENSORS_LM93 |
| 669 | tristate "National Semiconductor LM93 and compatibles" |
Jean Delvare | dabf375 | 2007-08-29 12:19:00 +0200 | [diff] [blame] | 670 | depends on I2C |
Hans-Jürgen Koch | e46957e | 2007-07-05 17:58:29 +0200 | [diff] [blame] | 671 | select HWMON_VID |
| 672 | help |
Guenter Roeck | c7bf71c | 2011-01-17 12:48:20 -0800 | [diff] [blame] | 673 | If you say yes here you get support for National Semiconductor LM93, |
| 674 | LM94, and compatible sensor chips. |
Hans-Jürgen Koch | e46957e | 2007-07-05 17:58:29 +0200 | [diff] [blame] | 675 | |
| 676 | This driver can also be built as a module. If so, the module |
| 677 | will be called lm93. |
| 678 | |
per.dalen@appeartv.com | de77901 | 2011-03-03 14:13:21 -0500 | [diff] [blame] | 679 | config SENSORS_LTC4151 |
| 680 | tristate "Linear Technology LTC4151" |
| 681 | depends on I2C |
| 682 | default n |
| 683 | help |
| 684 | If you say yes here you get support for Linear Technology LTC4151 |
| 685 | High Voltage I2C Current and Voltage Monitor interface. |
| 686 | |
| 687 | This driver can also be built as a module. If so, the module will |
| 688 | be called ltc4151. |
| 689 | |
Ira Snyder | 72f5de9 | 2009-03-31 15:24:29 -0700 | [diff] [blame] | 690 | config SENSORS_LTC4215 |
| 691 | tristate "Linear Technology LTC4215" |
| 692 | depends on I2C && EXPERIMENTAL |
| 693 | default n |
| 694 | help |
| 695 | If you say yes here you get support for Linear Technology LTC4215 |
| 696 | Hot Swap Controller I2C interface. |
| 697 | |
| 698 | This driver can also be built as a module. If so, the module will |
| 699 | be called ltc4215. |
| 700 | |
Ira Snyder | 6e34b18 | 2009-01-07 16:37:32 +0100 | [diff] [blame] | 701 | config SENSORS_LTC4245 |
| 702 | tristate "Linear Technology LTC4245" |
| 703 | depends on I2C && EXPERIMENTAL |
| 704 | default n |
| 705 | help |
| 706 | If you say yes here you get support for Linear Technology LTC4245 |
| 707 | Multiple Supply Hot Swap Controller I2C interface. |
| 708 | |
| 709 | This driver can also be built as a module. If so, the module will |
| 710 | be called ltc4245. |
| 711 | |
Guenter Roeck | e5f5c99 | 2010-06-25 11:59:54 -0700 | [diff] [blame] | 712 | config SENSORS_LTC4261 |
| 713 | tristate "Linear Technology LTC4261" |
| 714 | depends on I2C && EXPERIMENTAL |
| 715 | default n |
| 716 | help |
| 717 | If you say yes here you get support for Linear Technology LTC4261 |
| 718 | Negative Voltage Hot Swap Controller I2C interface. |
| 719 | |
| 720 | This driver can also be built as a module. If so, the module will |
| 721 | be called ltc4261. |
| 722 | |
Davide Rizzo | 0616032 | 2009-03-31 15:24:27 -0700 | [diff] [blame] | 723 | config SENSORS_LM95241 |
Guenter Roeck | 8c1d041 | 2011-07-05 13:31:48 -0700 | [diff] [blame] | 724 | tristate "National Semiconductor LM95241 and compatibles" |
Davide Rizzo | 0616032 | 2009-03-31 15:24:27 -0700 | [diff] [blame] | 725 | depends on I2C |
| 726 | help |
Guenter Roeck | 8c1d041 | 2011-07-05 13:31:48 -0700 | [diff] [blame] | 727 | If you say yes here you get support for LM95231 and LM95241 sensor |
| 728 | chips. |
Davide Rizzo | 0616032 | 2009-03-31 15:24:27 -0700 | [diff] [blame] | 729 | |
| 730 | This driver can also be built as a module. If so, the module |
| 731 | will be called lm95241. |
| 732 | |
Alexander Stein | fffd80c | 2011-06-28 15:11:23 +0000 | [diff] [blame] | 733 | config SENSORS_LM95245 |
| 734 | tristate "National Semiconductor LM95245 sensor chip" |
| 735 | depends on I2C && EXPERIMENTAL |
| 736 | help |
| 737 | If you say yes here you get support for LM95245 sensor chip. |
| 738 | |
| 739 | This driver can also be built as a module. If so, the module |
| 740 | will be called lm95245. |
| 741 | |
Eric Miao | 55b951e | 2008-08-29 04:26:48 +0800 | [diff] [blame] | 742 | config SENSORS_MAX1111 |
| 743 | tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" |
| 744 | depends on SPI_MASTER |
| 745 | help |
| 746 | Say y here to support Maxim's MAX1111 ADC chips. |
| 747 | |
| 748 | This driver can also be built as a module. If so, the module |
| 749 | will be called max1111. |
| 750 | |
Guenter Roeck | f5bae26 | 2011-02-02 08:49:54 -0800 | [diff] [blame] | 751 | config SENSORS_MAX16065 |
| 752 | tristate "Maxim MAX16065 System Manager and compatibles" |
| 753 | depends on I2C |
| 754 | help |
| 755 | If you say yes here you get support for hardware monitoring |
| 756 | capabilities of the following Maxim System Manager chips. |
| 757 | MAX16065 |
| 758 | MAX16066 |
| 759 | MAX16067 |
| 760 | MAX16068 |
| 761 | MAX16070 |
| 762 | MAX16071 |
| 763 | |
| 764 | This driver can also be built as a module. If so, the module |
| 765 | will be called max16065. |
| 766 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 767 | config SENSORS_MAX1619 |
| 768 | tristate "Maxim MAX1619 sensor chip" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 769 | depends on I2C |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 770 | help |
| 771 | If you say yes here you get support for MAX1619 sensor chip. |
| 772 | |
| 773 | This driver can also be built as a module. If so, the module |
| 774 | will be called max1619. |
| 775 | |
David George | 731b4ca | 2011-06-02 08:43:45 -0700 | [diff] [blame] | 776 | config SENSORS_MAX1668 |
| 777 | tristate "Maxim MAX1668 and compatibles" |
| 778 | depends on I2C && EXPERIMENTAL |
| 779 | help |
| 780 | If you say yes here you get support for MAX1668, MAX1989 and |
| 781 | MAX1805 chips. |
| 782 | |
| 783 | This driver can also be built as a module. If so, the module |
| 784 | will be called max1668. |
| 785 | |
stigge@antcom.de | a5b79d6 | 2011-01-20 18:42:55 +0100 | [diff] [blame] | 786 | config SENSORS_MAX6639 |
| 787 | tristate "Maxim MAX6639 sensor chip" |
| 788 | depends on I2C && EXPERIMENTAL |
| 789 | help |
| 790 | If you say yes here you get support for the MAX6639 |
| 791 | sensor chips. |
| 792 | |
| 793 | This driver can also be built as a module. If so, the module |
| 794 | will be called max6639. |
| 795 | |
Per Dalén | 83bffbc | 2011-04-06 20:29:44 +0200 | [diff] [blame] | 796 | config SENSORS_MAX6642 |
| 797 | tristate "Maxim MAX6642 sensor chip" |
| 798 | depends on I2C && EXPERIMENTAL |
| 799 | help |
| 800 | If you say yes here you get support for MAX6642 sensor chip. |
| 801 | MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor |
| 802 | with Overtemperature Alarm from Maxim. |
| 803 | |
| 804 | This driver can also be built as a module. If so, the module |
| 805 | will be called max6642. |
| 806 | |
Hans-Juergen Koch | d20620d | 2007-05-08 17:22:00 +0200 | [diff] [blame] | 807 | config SENSORS_MAX6650 |
| 808 | tristate "Maxim MAX6650 sensor chip" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 809 | depends on I2C && EXPERIMENTAL |
Hans-Juergen Koch | d20620d | 2007-05-08 17:22:00 +0200 | [diff] [blame] | 810 | help |
| 811 | If you say yes here you get support for the MAX6650 / MAX6651 |
| 812 | sensor chips. |
| 813 | |
| 814 | This driver can also be built as a module. If so, the module |
| 815 | will be called max6650. |
| 816 | |
Xie Xiaobo | 5510e62 | 2012-03-23 10:02:20 +0100 | [diff] [blame] | 817 | config SENSORS_MCP3021 |
| 818 | tristate "Microchip MCP3021" |
| 819 | depends on I2C && EXPERIMENTAL |
| 820 | help |
| 821 | If you say yes here you get support for the MCP3021 chip |
| 822 | that is a A/D converter (ADC) with 10-bit resolution. |
| 823 | |
| 824 | This driver can also be built as a module. If so, the module |
| 825 | will be called mcp3021. |
| 826 | |
Donggeun Kim | f22aaaa | 2011-06-20 16:48:19 +0900 | [diff] [blame] | 827 | config SENSORS_NTC_THERMISTOR |
| 828 | tristate "NTC thermistor support" |
| 829 | depends on EXPERIMENTAL |
| 830 | help |
| 831 | This driver supports NTC thermistors sensor reading and its |
| 832 | interpretation. The driver can also monitor the temperature and |
| 833 | send notifications about the temperature. |
| 834 | |
| 835 | Currently, this driver supports |
| 836 | NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333. |
| 837 | |
| 838 | This driver can also be built as a module. If so, the module |
| 839 | will be called ntc-thermistor. |
| 840 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 841 | config SENSORS_PC87360 |
| 842 | tristate "National Semiconductor PC87360 family" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 843 | depends on !PPC |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 844 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 845 | help |
| 846 | If you say yes here you get access to the hardware monitoring |
| 847 | functions of the National Semiconductor PC8736x Super-I/O chips. |
| 848 | The PC87360, PC87363 and PC87364 only have fan monitoring and |
| 849 | control. The PC87365 and PC87366 additionally have voltage and |
| 850 | temperature monitoring. |
| 851 | |
| 852 | This driver can also be built as a module. If so, the module |
| 853 | will be called pc87360. |
| 854 | |
Jean Delvare | ba224e2 | 2006-12-12 18:18:29 +0100 | [diff] [blame] | 855 | config SENSORS_PC87427 |
| 856 | tristate "National Semiconductor PC87427" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 857 | depends on !PPC |
Jean Delvare | ba224e2 | 2006-12-12 18:18:29 +0100 | [diff] [blame] | 858 | help |
| 859 | If you say yes here you get access to the hardware monitoring |
| 860 | functions of the National Semiconductor PC87427 Super-I/O chip. |
| 861 | The chip has two distinct logical devices, one for fan speed |
| 862 | monitoring and control, and one for voltage and temperature |
Jean Delvare | 008e5f3 | 2010-08-14 21:08:59 +0200 | [diff] [blame] | 863 | monitoring. Fan speed monitoring and control are supported, as |
| 864 | well as temperature monitoring. Voltages aren't supported yet. |
Jean Delvare | ba224e2 | 2006-12-12 18:18:29 +0100 | [diff] [blame] | 865 | |
| 866 | This driver can also be built as a module. If so, the module |
| 867 | will be called pc87427. |
| 868 | |
Jean Delvare | fb4504f | 2009-03-30 21:46:43 +0200 | [diff] [blame] | 869 | config SENSORS_PCF8591 |
| 870 | tristate "Philips PCF8591 ADC/DAC" |
| 871 | depends on I2C |
| 872 | default n |
| 873 | help |
| 874 | If you say yes here you get support for Philips PCF8591 4-channel |
| 875 | ADC, 1-channel DAC chips. |
| 876 | |
| 877 | This driver can also be built as a module. If so, the module |
| 878 | will be called pcf8591. |
| 879 | |
| 880 | These devices are hard to detect and rarely found on mainstream |
| 881 | hardware. If unsure, say N. |
| 882 | |
Guenter Roeck | 9d2ecfb | 2011-07-12 07:15:19 -0700 | [diff] [blame] | 883 | source drivers/hwmon/pmbus/Kconfig |
Guenter Roeck | 442aba7 | 2011-01-26 20:09:02 -0800 | [diff] [blame] | 884 | |
Jonathan Cameron | 251eb40 | 2009-04-13 14:39:45 -0700 | [diff] [blame] | 885 | config SENSORS_SHT15 |
| 886 | tristate "Sensiron humidity and temperature sensors. SHT15 and compat." |
Guenter Roeck | be45d42 | 2012-03-20 23:06:35 -0400 | [diff] [blame] | 887 | depends on GPIOLIB |
Jonathan Cameron | 251eb40 | 2009-04-13 14:39:45 -0700 | [diff] [blame] | 888 | help |
| 889 | If you say yes here you get support for the Sensiron SHT10, SHT11, |
| 890 | SHT15, SHT71, SHT75 humidity and temperature sensors. |
| 891 | |
| 892 | This driver can also be built as a module. If so, the module |
| 893 | will be called sht15. |
| 894 | |
Urs Fleisch | 430400b | 2011-01-07 07:15:39 +0000 | [diff] [blame] | 895 | config SENSORS_SHT21 |
| 896 | tristate "Sensiron humidity and temperature sensors. SHT21 and compat." |
| 897 | depends on I2C |
| 898 | help |
| 899 | If you say yes here you get support for the Sensiron SHT21, SHT25 |
| 900 | humidity and temperature sensors. |
| 901 | |
| 902 | This driver can also be built as a module. If so, the module |
| 903 | will be called sht21. |
| 904 | |
Ben Dooks | bff7865 | 2009-07-18 10:12:28 +0100 | [diff] [blame] | 905 | config SENSORS_S3C |
Maurus Cuelenaere | 62991f7 | 2010-10-28 20:31:44 +0200 | [diff] [blame] | 906 | tristate "Samsung built-in ADC" |
| 907 | depends on S3C_ADC |
Ben Dooks | bff7865 | 2009-07-18 10:12:28 +0100 | [diff] [blame] | 908 | help |
| 909 | If you say yes here you get support for the on-board ADCs of |
Maurus Cuelenaere | 62991f7 | 2010-10-28 20:31:44 +0200 | [diff] [blame] | 910 | the Samsung S3C24XX, S3C64XX and other series of SoC |
Ben Dooks | bff7865 | 2009-07-18 10:12:28 +0100 | [diff] [blame] | 911 | |
| 912 | This driver can also be built as a module. If so, the module |
Maurus Cuelenaere | 62991f7 | 2010-10-28 20:31:44 +0200 | [diff] [blame] | 913 | will be called s3c-hwmon. |
Ben Dooks | bff7865 | 2009-07-18 10:12:28 +0100 | [diff] [blame] | 914 | |
| 915 | config SENSORS_S3C_RAW |
| 916 | bool "Include raw channel attributes in sysfs" |
| 917 | depends on SENSORS_S3C |
| 918 | help |
| 919 | Say Y here if you want to include raw copies of all the ADC |
| 920 | channels in sysfs. |
| 921 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 922 | config SENSORS_SIS5595 |
| 923 | tristate "Silicon Integrated Systems Corp. SiS5595" |
Jean Delvare | 17e7dc4 | 2007-06-09 10:11:16 -0400 | [diff] [blame] | 924 | depends on PCI |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 925 | help |
| 926 | If you say yes here you get support for the integrated sensors in |
| 927 | SiS5595 South Bridges. |
| 928 | |
| 929 | This driver can also be built as a module. If so, the module |
| 930 | will be called sis5595. |
| 931 | |
Guenter Roeck | 920fa1f | 2010-08-09 17:21:06 -0700 | [diff] [blame] | 932 | config SENSORS_SMM665 |
| 933 | tristate "Summit Microelectronics SMM665" |
| 934 | depends on I2C && EXPERIMENTAL |
| 935 | default n |
| 936 | help |
| 937 | If you say yes here you get support for the hardware monitoring |
| 938 | features of the Summit Microelectronics SMM665/SMM665B Six-Channel |
| 939 | Active DC Output Controller / Monitor. |
| 940 | |
| 941 | Other supported chips are SMM465, SMM665C, SMM764, and SMM766. |
| 942 | Support for those chips is untested. |
| 943 | |
| 944 | This driver can also be built as a module. If so, the module will |
| 945 | be called smm665. |
| 946 | |
Juerg Haefliger | 9431996 | 2007-06-09 10:11:16 -0400 | [diff] [blame] | 947 | config SENSORS_DME1737 |
Juerg Haefliger | e95c237 | 2007-10-07 21:27:35 -0700 | [diff] [blame] | 948 | tristate "SMSC DME1737, SCH311x and compatibles" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 949 | depends on I2C && EXPERIMENTAL && !PPC |
Juerg Haefliger | 9431996 | 2007-06-09 10:11:16 -0400 | [diff] [blame] | 950 | select HWMON_VID |
| 951 | help |
| 952 | If you say yes here you get support for the hardware monitoring |
Juerg Haefliger | 549edb8 | 2008-08-06 22:41:03 +0200 | [diff] [blame] | 953 | and fan control features of the SMSC DME1737, SCH311x, SCH5027, and |
| 954 | Asus A8000 Super-I/O chips. |
Juerg Haefliger | 9431996 | 2007-06-09 10:11:16 -0400 | [diff] [blame] | 955 | |
| 956 | This driver can also be built as a module. If so, the module |
| 957 | will be called dme1737. |
| 958 | |
Kalhan Trisal | dac6831 | 2010-05-27 19:58:56 +0200 | [diff] [blame] | 959 | config SENSORS_EMC1403 |
Jekyll Lai | 7a1b76f | 2011-01-12 21:55:12 +0100 | [diff] [blame] | 960 | tristate "SMSC EMC1403/23 thermal sensor" |
Kalhan Trisal | dac6831 | 2010-05-27 19:58:56 +0200 | [diff] [blame] | 961 | depends on I2C |
| 962 | help |
Jekyll Lai | 7a1b76f | 2011-01-12 21:55:12 +0100 | [diff] [blame] | 963 | If you say yes here you get support for the SMSC EMC1403/23 |
Kalhan Trisal | dac6831 | 2010-05-27 19:58:56 +0200 | [diff] [blame] | 964 | temperature monitoring chip. |
| 965 | |
| 966 | Threshold values can be configured using sysfs. |
| 967 | Data from the different diodes are accessible via sysfs. |
| 968 | |
Steve Glendinning | 9df7305 | 2010-08-14 21:08:54 +0200 | [diff] [blame] | 969 | config SENSORS_EMC2103 |
| 970 | tristate "SMSC EMC2103" |
| 971 | depends on I2C |
| 972 | help |
| 973 | If you say yes here you get support for the temperature |
| 974 | and fan sensors of the SMSC EMC2103 chips. |
| 975 | |
| 976 | This driver can also be built as a module. If so, the module |
| 977 | will be called emc2103. |
| 978 | |
Jean Delvare | b0b349a | 2011-05-25 20:43:33 +0200 | [diff] [blame] | 979 | config SENSORS_EMC6W201 |
| 980 | tristate "SMSC EMC6W201" |
| 981 | depends on I2C |
| 982 | help |
| 983 | If you say yes here you get support for the SMSC EMC6W201 |
| 984 | hardware monitoring chip. |
| 985 | |
| 986 | This driver can also be built as a module. If so, the module |
| 987 | will be called emc6w201. |
| 988 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 989 | config SENSORS_SMSC47M1 |
| 990 | tristate "SMSC LPC47M10x and compatibles" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 991 | depends on !PPC |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 992 | help |
| 993 | If you say yes here you get support for the integrated fan |
| 994 | monitoring and control capabilities of the SMSC LPC47B27x, |
Jean Delvare | 6091780 | 2006-10-08 22:00:44 +0200 | [diff] [blame] | 995 | LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, |
Jean Delvare | 8eccbb6 | 2007-05-08 17:21:59 +0200 | [diff] [blame] | 996 | LPC47M192, LPC47M292 and LPC47M997 chips. |
Hartmut Rick | 59ac836 | 2006-03-23 16:37:23 +0100 | [diff] [blame] | 997 | |
Jean Delvare | 8eccbb6 | 2007-05-08 17:21:59 +0200 | [diff] [blame] | 998 | The temperature and voltage sensor features of the LPC47M15x, |
| 999 | LPC47M192, LPC47M292 and LPC47M997 are supported by another |
| 1000 | driver, select also "SMSC LPC47M192 and compatibles" below for |
| 1001 | those. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1002 | |
| 1003 | This driver can also be built as a module. If so, the module |
| 1004 | will be called smsc47m1. |
| 1005 | |
Hartmut Rick | 59ac836 | 2006-03-23 16:37:23 +0100 | [diff] [blame] | 1006 | config SENSORS_SMSC47M192 |
| 1007 | tristate "SMSC LPC47M192 and compatibles" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 1008 | depends on I2C |
Hartmut Rick | 59ac836 | 2006-03-23 16:37:23 +0100 | [diff] [blame] | 1009 | select HWMON_VID |
| 1010 | help |
| 1011 | If you say yes here you get support for the temperature and |
Jean Delvare | 00cb473 | 2007-05-08 17:21:59 +0200 | [diff] [blame] | 1012 | voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 |
| 1013 | and LPC47M997 chips. |
Hartmut Rick | 59ac836 | 2006-03-23 16:37:23 +0100 | [diff] [blame] | 1014 | |
| 1015 | The fan monitoring and control capabilities of these chips |
| 1016 | are supported by another driver, select |
| 1017 | "SMSC LPC47M10x and compatibles" above. You need both drivers |
| 1018 | if you want fan control and voltage/temperature sensor support. |
| 1019 | |
| 1020 | This driver can also be built as a module. If so, the module |
| 1021 | will be called smsc47m192. |
| 1022 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1023 | config SENSORS_SMSC47B397 |
| 1024 | tristate "SMSC LPC47B397-NC" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 1025 | depends on EXPERIMENTAL && !PPC |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1026 | help |
| 1027 | If you say yes here you get support for the SMSC LPC47B397-NC |
| 1028 | sensor chip. |
| 1029 | |
| 1030 | This driver can also be built as a module. If so, the module |
| 1031 | will be called smsc47b397. |
| 1032 | |
Hans de Goede | 28ff2f7 | 2011-07-25 21:46:09 +0200 | [diff] [blame] | 1033 | config SENSORS_SCH56XX_COMMON |
| 1034 | tristate |
| 1035 | default n |
| 1036 | |
Hans de Goede | a98d506 | 2011-03-21 17:59:36 +0100 | [diff] [blame] | 1037 | config SENSORS_SCH5627 |
| 1038 | tristate "SMSC SCH5627" |
Hans de Goede | 2d8c7ff | 2012-05-24 22:18:58 +0200 | [diff] [blame^] | 1039 | depends on !PPC && WATCHDOG |
Hans de Goede | 28ff2f7 | 2011-07-25 21:46:09 +0200 | [diff] [blame] | 1040 | select SENSORS_SCH56XX_COMMON |
Hans de Goede | 2d8c7ff | 2012-05-24 22:18:58 +0200 | [diff] [blame^] | 1041 | select WATCHDOG_CORE |
Hans de Goede | a98d506 | 2011-03-21 17:59:36 +0100 | [diff] [blame] | 1042 | help |
| 1043 | If you say yes here you get support for the hardware monitoring |
Hans de Goede | 312869e | 2012-03-18 13:05:08 +0100 | [diff] [blame] | 1044 | features of the SMSC SCH5627 Super-I/O chip including support for |
| 1045 | the integrated watchdog. |
Hans de Goede | a98d506 | 2011-03-21 17:59:36 +0100 | [diff] [blame] | 1046 | |
| 1047 | This driver can also be built as a module. If so, the module |
| 1048 | will be called sch5627. |
| 1049 | |
Hans de Goede | 0772a64 | 2011-07-25 21:46:09 +0200 | [diff] [blame] | 1050 | config SENSORS_SCH5636 |
| 1051 | tristate "SMSC SCH5636" |
Hans de Goede | 2d8c7ff | 2012-05-24 22:18:58 +0200 | [diff] [blame^] | 1052 | depends on !PPC && WATCHDOG |
Hans de Goede | 0772a64 | 2011-07-25 21:46:09 +0200 | [diff] [blame] | 1053 | select SENSORS_SCH56XX_COMMON |
Hans de Goede | 2d8c7ff | 2012-05-24 22:18:58 +0200 | [diff] [blame^] | 1054 | select WATCHDOG_CORE |
Hans de Goede | 0772a64 | 2011-07-25 21:46:09 +0200 | [diff] [blame] | 1055 | help |
| 1056 | SMSC SCH5636 Super I/O chips include an embedded microcontroller for |
| 1057 | hardware monitoring solutions, allowing motherboard manufacturers to |
| 1058 | create their own custom hwmon solution based upon the SCH5636. |
| 1059 | |
| 1060 | Currently this driver only supports the Fujitsu Theseus SCH5636 based |
| 1061 | hwmon solution. Say yes here if you want support for the Fujitsu |
Hans de Goede | 312869e | 2012-03-18 13:05:08 +0100 | [diff] [blame] | 1062 | Theseus' hardware monitoring features including support for the |
| 1063 | integrated watchdog. |
Hans de Goede | 0772a64 | 2011-07-25 21:46:09 +0200 | [diff] [blame] | 1064 | |
| 1065 | This driver can also be built as a module. If so, the module |
| 1066 | will be called sch5636. |
| 1067 | |
Dirk Eibach | 8c22a8f | 2011-03-21 17:59:36 +0100 | [diff] [blame] | 1068 | config SENSORS_ADS1015 |
| 1069 | tristate "Texas Instruments ADS1015" |
| 1070 | depends on I2C |
| 1071 | help |
| 1072 | If you say yes here you get support for Texas Instruments ADS1015 |
| 1073 | 12-bit 4-input ADC device. |
| 1074 | |
| 1075 | This driver can also be built as a module. If so, the module |
| 1076 | will be called ads1015. |
| 1077 | |
Steve Hardy | 5812f92 | 2008-01-22 23:00:02 +0000 | [diff] [blame] | 1078 | config SENSORS_ADS7828 |
| 1079 | tristate "Texas Instruments ADS7828" |
| 1080 | depends on I2C |
| 1081 | help |
| 1082 | If you say yes here you get support for Texas Instruments ADS7828 |
| 1083 | 12-bit 8-channel ADC device. |
| 1084 | |
| 1085 | This driver can also be built as a module. If so, the module |
| 1086 | will be called ads7828. |
| 1087 | |
Paul Thomas | e0c70b8 | 2010-05-24 14:33:38 -0700 | [diff] [blame] | 1088 | config SENSORS_ADS7871 |
| 1089 | tristate "Texas Instruments ADS7871 A/D converter" |
| 1090 | depends on SPI |
| 1091 | help |
| 1092 | If you say yes here you get support for TI ADS7871 & ADS7870 |
| 1093 | |
| 1094 | This driver can also be built as a module. If so, the module |
| 1095 | will be called ads7871. |
| 1096 | |
Tomaz Mertelj | b5430a0 | 2010-01-08 14:43:04 -0800 | [diff] [blame] | 1097 | config SENSORS_AMC6821 |
| 1098 | tristate "Texas Instruments AMC6821" |
| 1099 | depends on I2C && EXPERIMENTAL |
| 1100 | help |
| 1101 | If you say yes here you get support for the Texas Instruments |
| 1102 | AMC6821 hardware monitoring chips. |
| 1103 | |
| 1104 | This driver can also be build as a module. If so, the module |
| 1105 | will be called amc6821. |
| 1106 | |
Felten, Lothar | f7c2fe3 | 2012-05-12 04:36:38 -0400 | [diff] [blame] | 1107 | config SENSORS_INA2XX |
| 1108 | tristate "Texas Instruments INA219, INA226" |
| 1109 | depends on I2C && EXPERIMENTAL |
| 1110 | help |
| 1111 | If you say yes here you get support for INA219 and INA226 power |
| 1112 | monitor chips. |
| 1113 | |
| 1114 | The INA2xx driver is configured for the default configuration of |
| 1115 | the part as described in the datasheet. |
| 1116 | Default value for Rshunt is 10 mOhms. |
| 1117 | This driver can also be built as a module. If so, the module |
| 1118 | will be called ina2xx. |
| 1119 | |
Krzysztof Helt | add77c6 | 2007-07-08 22:43:00 +0200 | [diff] [blame] | 1120 | config SENSORS_THMC50 |
| 1121 | tristate "Texas Instruments THMC50 / Analog Devices ADM1022" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 1122 | depends on I2C |
Krzysztof Helt | add77c6 | 2007-07-08 22:43:00 +0200 | [diff] [blame] | 1123 | help |
| 1124 | If you say yes here you get support for Texas Instruments THMC50 |
| 1125 | sensor chips and clones: the Analog Devices ADM1022. |
| 1126 | |
| 1127 | This driver can also be built as a module. If so, the module |
| 1128 | will be called thmc50. |
| 1129 | |
Steven King | beb1b6b | 2010-05-27 19:58:56 +0200 | [diff] [blame] | 1130 | config SENSORS_TMP102 |
Jean Delvare | cff37c9 | 2010-05-27 19:58:57 +0200 | [diff] [blame] | 1131 | tristate "Texas Instruments TMP102" |
Steven King | beb1b6b | 2010-05-27 19:58:56 +0200 | [diff] [blame] | 1132 | depends on I2C && EXPERIMENTAL |
| 1133 | help |
| 1134 | If you say yes here you get support for Texas Instruments TMP102 |
| 1135 | sensor chips. |
| 1136 | |
| 1137 | This driver can also be built as a module. If so, the module |
| 1138 | will be called tmp102. |
| 1139 | |
Hans de Goede | ab2b79d | 2009-06-15 18:39:46 +0200 | [diff] [blame] | 1140 | config SENSORS_TMP401 |
| 1141 | tristate "Texas Instruments TMP401 and compatibles" |
| 1142 | depends on I2C && EXPERIMENTAL |
| 1143 | help |
| 1144 | If you say yes here you get support for Texas Instruments TMP401 and |
| 1145 | TMP411 temperature sensor chips. |
| 1146 | |
| 1147 | This driver can also be built as a module. If so, the module |
| 1148 | will be called tmp401. |
| 1149 | |
Andre Prendel | 9410700 | 2009-09-15 17:18:11 +0200 | [diff] [blame] | 1150 | config SENSORS_TMP421 |
| 1151 | tristate "Texas Instruments TMP421 and compatible" |
| 1152 | depends on I2C && EXPERIMENTAL |
| 1153 | help |
| 1154 | If you say yes here you get support for Texas Instruments TMP421, |
| 1155 | TMP422 and TMP423 temperature sensor chips. |
| 1156 | |
| 1157 | This driver can also be built as a module. If so, the module |
| 1158 | will be called tmp421. |
| 1159 | |
Keerthy | 0070bdd | 2011-03-01 19:12:36 +0530 | [diff] [blame] | 1160 | config SENSORS_TWL4030_MADC |
| 1161 | tristate "Texas Instruments TWL4030 MADC Hwmon" |
| 1162 | depends on TWL4030_MADC |
| 1163 | help |
| 1164 | If you say yes here you get hwmon support for triton |
| 1165 | TWL4030-MADC. |
| 1166 | |
| 1167 | This driver can also be built as a module. If so it will be called |
| 1168 | twl4030-madc-hwmon. |
| 1169 | |
Harald Welte | 70c3877 | 2009-12-16 21:38:28 +0100 | [diff] [blame] | 1170 | config SENSORS_VIA_CPUTEMP |
| 1171 | tristate "VIA CPU temperature sensor" |
| 1172 | depends on X86 |
Jean Delvare | 764e043 | 2011-07-25 21:46:10 +0200 | [diff] [blame] | 1173 | select HWMON_VID |
Harald Welte | 70c3877 | 2009-12-16 21:38:28 +0100 | [diff] [blame] | 1174 | help |
| 1175 | If you say yes here you get support for the temperature |
| 1176 | sensor inside your CPU. Supported are all known variants of |
| 1177 | the VIA C7 and Nano. |
| 1178 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1179 | config SENSORS_VIA686A |
| 1180 | tristate "VIA686A" |
Jean Delvare | 2ec342e | 2007-06-09 10:11:16 -0400 | [diff] [blame] | 1181 | depends on PCI |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1182 | help |
| 1183 | If you say yes here you get support for the integrated sensors in |
| 1184 | Via 686A/B South Bridges. |
| 1185 | |
| 1186 | This driver can also be built as a module. If so, the module |
| 1187 | will be called via686a. |
| 1188 | |
Juerg Haefliger | ab41319 | 2006-09-24 20:54:04 +0200 | [diff] [blame] | 1189 | config SENSORS_VT1211 |
| 1190 | tristate "VIA VT1211" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 1191 | depends on !PPC |
Juerg Haefliger | ab41319 | 2006-09-24 20:54:04 +0200 | [diff] [blame] | 1192 | select HWMON_VID |
| 1193 | help |
| 1194 | If you say yes here then you get support for hardware monitoring |
| 1195 | features of the VIA VT1211 Super-I/O chip. |
| 1196 | |
| 1197 | This driver can also be built as a module. If so, the module |
| 1198 | will be called vt1211. |
| 1199 | |
Roger Lucas | 1de9e37 | 2005-11-26 20:20:05 +0100 | [diff] [blame] | 1200 | config SENSORS_VT8231 |
Jean Delvare | 51bd563 | 2006-09-24 20:51:37 +0200 | [diff] [blame] | 1201 | tristate "VIA VT8231" |
Roger Lucas | ec5e1a4 | 2007-06-12 21:04:08 +0200 | [diff] [blame] | 1202 | depends on PCI |
Roger Lucas | 1de9e37 | 2005-11-26 20:20:05 +0100 | [diff] [blame] | 1203 | select HWMON_VID |
Roger Lucas | 1de9e37 | 2005-11-26 20:20:05 +0100 | [diff] [blame] | 1204 | help |
| 1205 | If you say yes here then you get support for the integrated sensors |
| 1206 | in the VIA VT8231 device. |
| 1207 | |
| 1208 | This driver can also be built as a module. If so, the module |
| 1209 | will be called vt8231. |
| 1210 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1211 | config SENSORS_W83781D |
Jean Delvare | 0566336 | 2007-11-30 23:51:24 +0100 | [diff] [blame] | 1212 | tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 1213 | depends on I2C |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 1214 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1215 | help |
| 1216 | If you say yes here you get support for the Winbond W8378x series |
Jean Delvare | 0566336 | 2007-11-30 23:51:24 +0100 | [diff] [blame] | 1217 | of sensor chips: the W83781D, W83782D and W83783S, and the similar |
| 1218 | Asus AS99127F. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1219 | |
| 1220 | This driver can also be built as a module. If so, the module |
| 1221 | will be called w83781d. |
| 1222 | |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1223 | config SENSORS_W83791D |
| 1224 | tristate "Winbond W83791D" |
Marc Hulsman | d1ebd59 | 2009-12-09 20:35:58 +0100 | [diff] [blame] | 1225 | depends on I2C |
Charles Spirakis | 9873964 | 2006-04-25 14:21:03 +0200 | [diff] [blame] | 1226 | select HWMON_VID |
| 1227 | help |
| 1228 | If you say yes here you get support for the Winbond W83791D chip. |
| 1229 | |
| 1230 | This driver can also be built as a module. If so, the module |
| 1231 | will be called w83791d. |
| 1232 | |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1233 | config SENSORS_W83792D |
| 1234 | tristate "Winbond W83792D" |
Jean Delvare | 0b22ce3 | 2010-10-28 20:31:50 +0200 | [diff] [blame] | 1235 | depends on I2C |
R.Marek@sh.cvut.cz | 5563e27 | 2005-07-27 11:43:47 +0000 | [diff] [blame] | 1236 | help |
| 1237 | If you say yes here you get support for the Winbond W83792D chip. |
| 1238 | |
| 1239 | This driver can also be built as a module. If so, the module |
| 1240 | will be called w83792d. |
| 1241 | |
Rudolf Marek | 6800c3d | 2006-12-12 18:18:30 +0100 | [diff] [blame] | 1242 | config SENSORS_W83793 |
| 1243 | tristate "Winbond W83793" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 1244 | depends on I2C && EXPERIMENTAL |
Stefano Brivio | 7a5e6bc | 2007-03-16 13:38:29 -0800 | [diff] [blame] | 1245 | select HWMON_VID |
Rudolf Marek | 6800c3d | 2006-12-12 18:18:30 +0100 | [diff] [blame] | 1246 | help |
| 1247 | If you say yes here you get support for the Winbond W83793 |
Sven Anders | 5852f96 | 2010-03-05 22:17:22 +0100 | [diff] [blame] | 1248 | hardware monitoring chip, including support for the integrated |
| 1249 | watchdog. |
Rudolf Marek | 6800c3d | 2006-12-12 18:18:30 +0100 | [diff] [blame] | 1250 | |
| 1251 | This driver can also be built as a module. If so, the module |
| 1252 | will be called w83793. |
| 1253 | |
Wei Song | 792d376 | 2010-10-28 20:31:44 +0200 | [diff] [blame] | 1254 | config SENSORS_W83795 |
| 1255 | tristate "Winbond/Nuvoton W83795G/ADG" |
| 1256 | depends on I2C && EXPERIMENTAL |
| 1257 | help |
| 1258 | If you say yes here you get support for the Winbond W83795G and |
Jean Delvare | 72fea69 | 2012-03-23 10:02:17 +0100 | [diff] [blame] | 1259 | W83795ADG hardware monitoring chip, including manual fan speed |
| 1260 | control. |
Wei Song | 792d376 | 2010-10-28 20:31:44 +0200 | [diff] [blame] | 1261 | |
| 1262 | This driver can also be built as a module. If so, the module |
| 1263 | will be called w83795. |
| 1264 | |
Jean Delvare | 00030af | 2010-10-28 20:31:49 +0200 | [diff] [blame] | 1265 | config SENSORS_W83795_FANCTRL |
Jean Delvare | 72fea69 | 2012-03-23 10:02:17 +0100 | [diff] [blame] | 1266 | boolean "Include automatic fan control support (DANGEROUS)" |
Jean Delvare | 00030af | 2010-10-28 20:31:49 +0200 | [diff] [blame] | 1267 | depends on SENSORS_W83795 && EXPERIMENTAL |
| 1268 | default n |
| 1269 | help |
Jean Delvare | 72fea69 | 2012-03-23 10:02:17 +0100 | [diff] [blame] | 1270 | If you say yes here, support for automatic fan speed control |
| 1271 | will be included in the driver. |
Jean Delvare | 00030af | 2010-10-28 20:31:49 +0200 | [diff] [blame] | 1272 | |
| 1273 | This part of the code wasn't carefully reviewed and tested yet, |
| 1274 | so enabling this option is strongly discouraged on production |
| 1275 | servers. Only developers and testers should enable it for the |
| 1276 | time being. |
| 1277 | |
| 1278 | Please also note that this option will create sysfs attribute |
| 1279 | files which may change in the future, so you shouldn't rely |
| 1280 | on them being stable. |
| 1281 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1282 | config SENSORS_W83L785TS |
| 1283 | tristate "Winbond W83L785TS-S" |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 1284 | depends on I2C && EXPERIMENTAL |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1285 | help |
| 1286 | If you say yes here you get support for the Winbond W83L785TS-S |
| 1287 | sensor chip, which is used on the Asus A7N8X, among other |
| 1288 | motherboards. |
| 1289 | |
| 1290 | This driver can also be built as a module. If so, the module |
| 1291 | will be called w83l785ts. |
| 1292 | |
Kevin Lo | 85f03bc | 2007-11-23 09:31:52 +0800 | [diff] [blame] | 1293 | config SENSORS_W83L786NG |
| 1294 | tristate "Winbond W83L786NG, W83L786NR" |
| 1295 | depends on I2C && EXPERIMENTAL |
| 1296 | help |
| 1297 | If you say yes here you get support for the Winbond W83L786NG |
| 1298 | and W83L786NR sensor chips. |
| 1299 | |
| 1300 | This driver can also be built as a module. If so, the module |
| 1301 | will be called w83l786ng. |
| 1302 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1303 | config SENSORS_W83627HF |
Jean Delvare | c2db6ce | 2006-01-18 23:22:12 +0100 | [diff] [blame] | 1304 | tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 1305 | depends on !PPC |
Jean Delvare | 303760b | 2005-07-31 21:52:01 +0200 | [diff] [blame] | 1306 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1307 | help |
| 1308 | If you say yes here you get support for the Winbond W836X7 series |
Jean Delvare | c2db6ce | 2006-01-18 23:22:12 +0100 | [diff] [blame] | 1309 | of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and |
| 1310 | W83697HF. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1311 | |
| 1312 | This driver can also be built as a module. If so, the module |
| 1313 | will be called w83627hf. |
| 1314 | |
| 1315 | config SENSORS_W83627EHF |
Jean Delvare | eff7687 | 2011-11-04 12:00:48 +0100 | [diff] [blame] | 1316 | tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F" |
Dean Nelson | 746cdfb | 2011-11-04 12:00:45 +0100 | [diff] [blame] | 1317 | depends on !PPC |
Jean Delvare | fc18d6c | 2007-06-24 11:19:42 +0200 | [diff] [blame] | 1318 | select HWMON_VID |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1319 | help |
David Hubbard | 658291f | 2007-06-24 11:15:03 +0200 | [diff] [blame] | 1320 | If you say yes here you get support for the hardware |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1321 | monitoring functionality of the Winbond W83627EHF Super-I/O chip. |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1322 | |
Jean Delvare | 8dd2d2c | 2005-07-27 21:33:15 +0200 | [diff] [blame] | 1323 | This driver also supports the W83627EHG, which is the lead-free |
David Hubbard | 658291f | 2007-06-24 11:15:03 +0200 | [diff] [blame] | 1324 | version of the W83627EHF, and the W83627DHG, which is a similar |
| 1325 | chip suited for specific Intel processors that use PECI such as |
Jean Delvare | eff7687 | 2011-11-04 12:00:48 +0100 | [diff] [blame] | 1326 | the Core 2 Duo. And also the W83627UHG, which is a stripped down |
| 1327 | version of the W83627DHG (as far as hardware monitoring goes.) |
Jean Delvare | 8dd2d2c | 2005-07-27 21:33:15 +0200 | [diff] [blame] | 1328 | |
Guenter Roeck | 2dd59c2 | 2011-02-22 08:20:51 -0800 | [diff] [blame] | 1329 | This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F |
| 1330 | (also known as W83667HG-I), and NCT6776F. |
Gong Jun | 237c8d2f | 2009-03-30 21:46:42 +0200 | [diff] [blame] | 1331 | |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1332 | This driver can also be built as a module. If so, the module |
| 1333 | will be called w83627ehf. |
| 1334 | |
Mark Brown | 08bad5a | 2009-07-28 15:52:22 +0100 | [diff] [blame] | 1335 | config SENSORS_WM831X |
| 1336 | tristate "WM831x PMICs" |
| 1337 | depends on MFD_WM831X |
| 1338 | help |
| 1339 | If you say yes here you get support for the hardware |
| 1340 | monitoring functionality of the Wolfson Microelectronics |
| 1341 | WM831x series of PMICs. |
| 1342 | |
| 1343 | This driver can also be built as a module. If so, the module |
| 1344 | will be called wm831x-hwmon. |
| 1345 | |
Mark Brown | fb6c023 | 2009-07-20 12:43:45 +0100 | [diff] [blame] | 1346 | config SENSORS_WM8350 |
| 1347 | tristate "Wolfson Microelectronics WM835x" |
| 1348 | depends on MFD_WM8350 |
| 1349 | help |
| 1350 | If you say yes here you get support for the hardware |
| 1351 | monitoring features of the WM835x series of PMICs. |
| 1352 | |
| 1353 | This driver can also be built as a module. If so, the module |
| 1354 | will be called wm8350-hwmon. |
| 1355 | |
David S. Miller | e041808 | 2008-08-24 20:59:49 -0700 | [diff] [blame] | 1356 | config SENSORS_ULTRA45 |
| 1357 | tristate "Sun Ultra45 PIC16F747" |
| 1358 | depends on SPARC64 |
| 1359 | help |
| 1360 | This driver provides support for the Ultra45 workstation environmental |
| 1361 | sensors. |
| 1362 | |
Nicolas Boichat | 6f2fad7 | 2007-05-08 00:24:52 -0700 | [diff] [blame] | 1363 | config SENSORS_APPLESMC |
| 1364 | tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" |
Jean Delvare | 548c343 | 2007-05-27 22:17:43 +0200 | [diff] [blame] | 1365 | depends on INPUT && X86 |
Nicolas Boichat | 6f2fad7 | 2007-05-08 00:24:52 -0700 | [diff] [blame] | 1366 | select NEW_LEDS |
| 1367 | select LEDS_CLASS |
Dmitry Torokhov | d5cf2b9 | 2007-09-26 00:01:35 -0400 | [diff] [blame] | 1368 | select INPUT_POLLDEV |
Nicolas Boichat | 6f2fad7 | 2007-05-08 00:24:52 -0700 | [diff] [blame] | 1369 | default n |
| 1370 | help |
| 1371 | This driver provides support for the Apple System Management |
| 1372 | Controller, which provides an accelerometer (Apple Sudden Motion |
| 1373 | Sensor), light sensors, temperature sensors, keyboard backlight |
| 1374 | control and fan control. |
| 1375 | |
| 1376 | Only Intel-based Apple's computers are supported (MacBook Pro, |
| 1377 | MacBook, MacMini). |
| 1378 | |
| 1379 | Data from the different sensors, keyboard backlight control and fan |
| 1380 | control are accessible via sysfs. |
| 1381 | |
| 1382 | This driver also provides an absolute input class device, allowing |
| 1383 | the laptop to act as a pinball machine-esque joystick. |
| 1384 | |
| 1385 | Say Y here if you have an applicable laptop and want to experience |
| 1386 | the awesome power of applesmc. |
| 1387 | |
Luotao Fu | 93ee0a7 | 2009-12-09 20:35:58 +0100 | [diff] [blame] | 1388 | config SENSORS_MC13783_ADC |
Uwe Kleine-Koenig | 0c27321 | 2012-03-23 10:02:19 +0100 | [diff] [blame] | 1389 | tristate "Freescale MC13783/MC13892 ADC" |
| 1390 | depends on MFD_MC13XXX |
Luotao Fu | 93ee0a7 | 2009-12-09 20:35:58 +0100 | [diff] [blame] | 1391 | help |
Uwe Kleine-Koenig | 0c27321 | 2012-03-23 10:02:19 +0100 | [diff] [blame] | 1392 | Support for the A/D converter on MC13783 and MC13892 PMIC. |
Luotao Fu | 93ee0a7 | 2009-12-09 20:35:58 +0100 | [diff] [blame] | 1393 | |
Jean Delvare | 61cba5c | 2009-09-15 17:18:13 +0200 | [diff] [blame] | 1394 | if ACPI |
| 1395 | |
| 1396 | comment "ACPI drivers" |
| 1397 | |
Jean Delvare | 7d03336 | 2011-05-25 20:43:32 +0200 | [diff] [blame] | 1398 | config SENSORS_ACPI_POWER |
| 1399 | tristate "ACPI 4.0 power meter" |
| 1400 | help |
| 1401 | This driver exposes ACPI 4.0 power meters as hardware monitoring |
| 1402 | devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware |
| 1403 | and a power meter. |
| 1404 | |
| 1405 | To compile this driver as a module, choose M here: |
| 1406 | the module will be called acpi_power_meter. |
| 1407 | |
Jean Delvare | 61cba5c | 2009-09-15 17:18:13 +0200 | [diff] [blame] | 1408 | config SENSORS_ATK0110 |
| 1409 | tristate "ASUS ATK0110" |
| 1410 | depends on X86 && EXPERIMENTAL |
| 1411 | help |
| 1412 | If you say yes here you get support for the ACPI hardware |
| 1413 | monitoring interface found in many ASUS motherboards. This |
| 1414 | driver will provide readings of fans, voltages and temperatures |
| 1415 | through the system firmware. |
| 1416 | |
| 1417 | This driver can also be built as a module. If so, the module |
| 1418 | will be called asus_atk0110. |
| 1419 | |
Jean Delvare | 61cba5c | 2009-09-15 17:18:13 +0200 | [diff] [blame] | 1420 | endif # ACPI |
Jean Delvare | ad2f931 | 2005-07-02 18:15:49 +0200 | [diff] [blame] | 1421 | |
Jan Engelhardt | 1d72acf | 2007-05-08 17:22:04 +0200 | [diff] [blame] | 1422 | endif # HWMON |