blob: 1bfb4439e4e1cb34fa4cb31a71eaf9a7db024071 [file] [log] [blame]
Jean Delvaread2f9312005-07-02 18:15:49 +02001#
Jean Delvare060b2f52006-06-12 21:55:28 +02002# Hardware monitoring chip drivers configuration
Jean Delvaread2f9312005-07-02 18:15:49 +02003#
4
Jan Engelhardt1d72acf2007-05-08 17:22:04 +02005menuconfig HWMON
Jean Delvaread2f9312005-07-02 18:15:49 +02006 tristate "Hardware Monitoring support"
Martin Schwidefskye25df122007-05-10 15:45:57 +02007 depends on HAS_IOMEM
Jean Delvaread2f9312005-07-02 18:15:49 +02008 default y
9 help
10 Hardware monitoring devices let you monitor the hardware health
11 of a system. Most modern motherboards include such a device. It
12 can include temperature sensors, voltage sensors, fan speed
13 sensors and various additional features such as the ability to
Mark M. Hoffman12364412005-07-15 21:38:08 -040014 control the speed of the fans. If you want this support you
15 should say Y here and also to the specific driver(s) for your
16 sensors chip(s) below.
17
Jean Delvare0d0001d2006-04-25 14:23:01 +020018 To find out which specific driver(s) you need, use the
19 sensors-detect script from the lm_sensors package. Read
20 <file:Documentation/hwmon/userspace-tools> for details.
21
Mark M. Hoffman12364412005-07-15 21:38:08 -040022 This support can also be built as a module. If so, the module
23 will be called hwmon.
Jean Delvaread2f9312005-07-02 18:15:49 +020024
Jan Engelhardt1d72acf2007-05-08 17:22:04 +020025if HWMON
26
Jean Delvare303760b2005-07-31 21:52:01 +020027config HWMON_VID
28 tristate
29 default n
30
Jean Delvare61cba5c2009-09-15 17:18:13 +020031config HWMON_DEBUG_CHIP
32 bool "Hardware Monitoring Chip debugging messages"
33 default n
34 help
35 Say Y here if you want the I2C chip drivers to produce a bunch of
36 debug messages to the system log. Select this if you are having
37 a problem with I2C support and want to see more of what is going
38 on.
39
40comment "Native drivers"
41
Hans de Goedef2b84bb2006-06-04 20:22:24 +020042config SENSORS_ABITUGURU
Hans de Goede3faa1ff2007-06-17 00:28:45 +020043 tristate "Abit uGuru (rev 1 & 2)"
Jean Delvaredabf3752007-08-29 12:19:00 +020044 depends on X86 && EXPERIMENTAL
Hans de Goedef2b84bb2006-06-04 20:22:24 +020045 help
Hans de Goede3faa1ff2007-06-17 00:28:45 +020046 If you say yes here you get support for the sensor part of the first
47 and second revision of the Abit uGuru chip. The voltage and frequency
48 control parts of the Abit uGuru are not supported. The Abit uGuru
49 chip can be found on Abit uGuru featuring motherboards (most modern
50 Abit motherboards from before end 2005). For more info and a list
51 of which motherboards have which revision see
52 Documentation/hwmon/abituguru
Hans de Goedef2b84bb2006-06-04 20:22:24 +020053
54 This driver can also be built as a module. If so, the module
55 will be called abituguru.
56
Hans de Goede3faa1ff2007-06-17 00:28:45 +020057config SENSORS_ABITUGURU3
58 tristate "Abit uGuru (rev 3)"
Jean Delvaredabf3752007-08-29 12:19:00 +020059 depends on X86 && EXPERIMENTAL
Hans de Goede3faa1ff2007-06-17 00:28:45 +020060 help
61 If you say yes here you get support for the sensor part of the
62 third revision of the Abit uGuru chip. Only reading the sensors
63 and their settings is supported. The third revision of the Abit
64 uGuru chip can be found on recent Abit motherboards (since end
65 2005). For more info and a list of which motherboards have which
66 revision see Documentation/hwmon/abituguru3
67
68 This driver can also be built as a module. If so, the module
69 will be called abituguru3.
70
Sean MacLennan6c633c32008-08-06 22:41:05 +020071config SENSORS_AD7414
72 tristate "Analog Devices AD7414"
73 depends on I2C && EXPERIMENTAL
74 help
75 If you say yes here you get support for the Analog Devices
76 AD7414 temperature monitoring chip.
77
78 This driver can also be built as a module. If so, the module
79 will be called ad7414.
80
Alessandro Zummo2d8dd652007-05-08 17:22:02 +020081config SENSORS_AD7418
82 tristate "Analog Devices AD7416, AD7417 and AD7418"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +020083 depends on I2C && EXPERIMENTAL
Alessandro Zummo2d8dd652007-05-08 17:22:02 +020084 help
85 If you say yes here you get support for the Analog Devices
86 AD7416, AD7417 and AD7418 temperature monitoring chips.
87
88 This driver can also be built as a module. If so, the module
89 will be called ad7418.
90
Marc Pignatd42139a2008-08-15 00:40:34 -070091config SENSORS_ADCXX
92 tristate "National Semiconductor ADCxxxSxxx"
93 depends on SPI_MASTER && EXPERIMENTAL
94 help
95 If you say yes here you get support for the National Semiconductor
96 ADC<bb><c>S<sss> chip family, where
97 * bb is the resolution in number of bits (8, 10, 12)
98 * c is the number of channels (1, 2, 4, 8)
99 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
100 kSPS and 101 for 1 MSPS)
101
102 Examples : ADC081S101, ADC124S501, ...
103
104 This driver can also be built as a module. If so, the module
105 will be called adcxx.
106
Jean Delvaread2f9312005-07-02 18:15:49 +0200107config SENSORS_ADM1021
108 tristate "Analog Devices ADM1021 and compatibles"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200109 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200110 help
111 If you say yes here you get support for Analog Devices ADM1021
112 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
113 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
114 and the XEON processor built-in sensor.
115
116 This driver can also be built as a module. If so, the module
117 will be called adm1021.
118
119config SENSORS_ADM1025
120 tristate "Analog Devices ADM1025 and compatibles"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200121 depends on I2C
Jean Delvare303760b2005-07-31 21:52:01 +0200122 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200123 help
124 If you say yes here you get support for Analog Devices ADM1025
125 and Philips NE1619 sensor chips.
126
127 This driver can also be built as a module. If so, the module
128 will be called adm1025.
129
130config SENSORS_ADM1026
131 tristate "Analog Devices ADM1026 and compatibles"
Jean Delvare0b22ce32010-10-28 20:31:50 +0200132 depends on I2C
Jean Delvare303760b2005-07-31 21:52:01 +0200133 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200134 help
135 If you say yes here you get support for Analog Devices ADM1026
136 sensor chip.
137
138 This driver can also be built as a module. If so, the module
139 will be called adm1026.
140
Corentin Labbecae2caa2007-02-14 21:15:04 +0100141config SENSORS_ADM1029
142 tristate "Analog Devices ADM1029"
Jean Delvare0b22ce32010-10-28 20:31:50 +0200143 depends on I2C
Corentin Labbecae2caa2007-02-14 21:15:04 +0100144 help
145 If you say yes here you get support for Analog Devices ADM1029
146 sensor chip.
147 Very rare chip, please let us know you use it.
148
149 This driver can also be built as a module. If so, the module
150 will be called adm1029.
151
Jean Delvaread2f9312005-07-02 18:15:49 +0200152config SENSORS_ADM1031
153 tristate "Analog Devices ADM1031 and compatibles"
Jean Delvare0b22ce32010-10-28 20:31:50 +0200154 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200155 help
156 If you say yes here you get support for Analog Devices ADM1031
157 and ADM1030 sensor chips.
158
159 This driver can also be built as a module. If so, the module
160 will be called adm1031.
161
162config SENSORS_ADM9240
163 tristate "Analog Devices ADM9240 and compatibles"
Grant Coady68f823d2008-08-06 22:41:05 +0200164 depends on I2C
Jean Delvare303760b2005-07-31 21:52:01 +0200165 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200166 help
167 If you say yes here you get support for Analog Devices ADM9240,
168 Dallas DS1780, National Semiconductor LM81 sensor chips.
169
170 This driver can also be built as a module. If so, the module
171 will be called adm9240.
172
Wolfram Sangd84ca5b2010-03-05 22:17:23 +0100173config SENSORS_ADT7411
174 tristate "Analog Devices ADT7411"
175 depends on I2C && EXPERIMENTAL
176 help
177 If you say yes here you get support for the Analog Devices
178 ADT7411 voltage and temperature monitoring chip.
179
180 This driver can also be built as a module. If so, the module
181 will be called adt7411.
182
Darrick J. Wongc0b4e3a2008-11-12 13:27:03 -0800183config SENSORS_ADT7462
184 tristate "Analog Devices ADT7462"
185 depends on I2C && EXPERIMENTAL
186 help
187 If you say yes here you get support for the Analog Devices
188 ADT7462 temperature monitoring chips.
189
190 This driver can also be built as a module. If so, the module
191 will be called adt7462.
192
Darrick J. Wong6f9703d2007-07-31 11:06:52 -0700193config SENSORS_ADT7470
194 tristate "Analog Devices ADT7470"
195 depends on I2C && EXPERIMENTAL
196 help
197 If you say yes here you get support for the Analog Devices
198 ADT7470 temperature monitoring chips.
199
200 This driver can also be built as a module. If so, the module
201 will be called adt7470.
202
Jordan Crouse1c301fc2009-01-15 22:27:47 +0100203config SENSORS_ADT7475
Jean Delvared8d2ee02009-12-09 20:36:08 +0100204 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
Jean Delvare0b22ce32010-10-28 20:31:50 +0200205 depends on I2C
Jean Delvare54fe4672009-12-09 20:36:08 +0100206 select HWMON_VID
Jordan Crouse1c301fc2009-01-15 22:27:47 +0100207 help
208 If you say yes here you get support for the Analog Devices
Jean Delvared8d2ee02009-12-09 20:36:08 +0100209 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
210 chips.
Jordan Crouse1c301fc2009-01-15 22:27:47 +0100211
212 This driver can also be build as a module. If so, the module
213 will be called adt7475.
214
George Josephd58de032010-03-05 22:17:25 +0100215config SENSORS_ASC7621
216 tristate "Andigilog aSC7621"
217 depends on HWMON && I2C
218 help
219 If you say yes here you get support for the aSC7621
Jaswinder Singh Rajputb00d8a72010-03-29 22:03:06 +0200220 family of SMBus sensors chip found on most Intel X38, X48, X58,
221 945, 965 and 975 desktop boards. Currently supported chips:
George Josephd58de032010-03-05 22:17:25 +0100222 aSC7621
223 aSC7621a
224
225 This driver can also be built as a module. If so, the module
226 will be called asc7621.
227
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200228config SENSORS_K8TEMP
Rudolf Marek4660cb32006-10-08 22:01:26 +0200229 tristate "AMD Athlon64/FX or Opteron temperature sensor"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200230 depends on X86 && PCI && EXPERIMENTAL
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200231 help
232 If you say yes here you get support for the temperature
Rudolf Marek4660cb32006-10-08 22:01:26 +0200233 sensor(s) inside your CPU. Supported is whole AMD K8
234 microarchitecture. Please note that you will need at least
235 lm-sensors 2.10.1 for proper userspace support.
Rudolf Marek29fa06c2006-08-28 14:40:17 +0200236
237 This driver can also be built as a module. If so, the module
238 will be called k8temp.
239
Clemens Ladisch3c57e892009-12-16 21:38:25 +0100240config SENSORS_K10TEMP
Clemens Ladischaa4790a2011-02-17 03:22:40 -0500241 tristate "AMD Family 10h/11h/12h/14h temperature sensor"
Clemens Ladisch3c57e892009-12-16 21:38:25 +0100242 depends on X86 && PCI
243 help
244 If you say yes here you get support for the temperature
245 sensor(s) inside your CPU. Supported are later revisions of
Clemens Ladischaa4790a2011-02-17 03:22:40 -0500246 the AMD Family 10h and all revisions of the AMD Family 11h,
247 12h (Llano), and 14h (Brazos) microarchitectures.
Clemens Ladisch3c57e892009-12-16 21:38:25 +0100248
249 This driver can also be built as a module. If so, the module
250 will be called k10temp.
251
Jean Delvaread2f9312005-07-02 18:15:49 +0200252config SENSORS_ASB100
253 tristate "Asus ASB100 Bach"
Jean Delvaredabf3752007-08-29 12:19:00 +0200254 depends on X86 && I2C && EXPERIMENTAL
Jean Delvare303760b2005-07-31 21:52:01 +0200255 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200256 help
257 If you say yes here you get support for the ASB100 Bach sensor
258 chip found on some Asus mainboards.
259
260 This driver can also be built as a module. If so, the module
261 will be called asb100.
262
263config SENSORS_ATXP1
264 tristate "Attansic ATXP1 VID controller"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200265 depends on I2C && EXPERIMENTAL
Jean Delvare303760b2005-07-31 21:52:01 +0200266 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200267 help
268 If you say yes here you get support for the Attansic ATXP1 VID
269 controller.
270
271 If your board have such a chip, you are able to control your CPU
272 core and other voltages.
273
274 This driver can also be built as a module. If so, the module
275 will be called atxp1.
276
Roland Stigge60994692011-01-09 09:31:39 -0500277config SENSORS_DS620
278 tristate "Dallas Semiconductor DS620"
279 depends on I2C
280 help
281 If you say yes here you get support for Dallas Semiconductor
282 DS620 sensor chip.
283
284 This driver can also be built as a module. If so, the module
285 will be called ds620.
286
Jean Delvaread2f9312005-07-02 18:15:49 +0200287config SENSORS_DS1621
288 tristate "Dallas Semiconductor DS1621 and DS1625"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200289 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200290 help
291 If you say yes here you get support for Dallas Semiconductor
292 DS1621 and DS1625 sensor chips.
293
294 This driver can also be built as a module. If so, the module
295 will be called ds1621.
296
Darrick J. Wong298c7522007-10-18 13:22:43 -0700297config SENSORS_I5K_AMB
298 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
299 depends on PCI && EXPERIMENTAL
300 help
301 If you say yes here you get support for FB-DIMM AMB temperature
302 monitoring chips on systems with the Intel 5000 series chipset.
303
304 This driver can also be built as a module. If so, the module
305 will be called i5k_amb.
306
Jean Delvaree53004e2006-01-09 23:26:14 +0100307config SENSORS_F71805F
Jean Delvare9cab0212007-07-15 10:36:06 +0200308 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
Jean Delvaree53004e2006-01-09 23:26:14 +0100309 help
310 If you say yes here you get support for hardware monitoring
Jean Delvare9cab0212007-07-15 10:36:06 +0200311 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
312 Super-I/O chips.
Jean Delvaree53004e2006-01-09 23:26:14 +0100313
314 This driver can also be built as a module. If so, the module
315 will be called f71805f.
316
Hans de Goede45fb3662007-07-13 14:34:19 +0200317config SENSORS_F71882FG
Andrew Mortonf2e41e92010-08-19 14:13:31 -0700318 tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
Hans de Goede45fb3662007-07-13 14:34:19 +0200319 help
Andrew Mortonf2e41e92010-08-19 14:13:31 -0700320 If you say yes here you get support for hardware monitoring
321 features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
Hans de Goede76698962009-12-09 20:36:01 +0100322 F71889FG and F8000 Super-I/O chips.
Hans de Goede45fb3662007-07-13 14:34:19 +0200323
324 This driver can also be built as a module. If so, the module
325 will be called f71882fg.
326
Riku Voipio84f1e442007-08-24 13:03:09 +0300327config SENSORS_F75375S
Jean Delvare0b22ce32010-10-28 20:31:50 +0200328 tristate "Fintek F75375S/SP and F75373"
329 depends on I2C
Riku Voipio84f1e442007-08-24 13:03:09 +0300330 help
331 If you say yes here you get support for hardware monitoring
332 features of the Fintek F75375S/SP and F75373
333
334 This driver can also be built as a module. If so, the module
335 will be called f75375s.
336
Hans de Goede569ff102007-10-11 08:06:29 -0400337config SENSORS_FSCHMD
Hans de Goedec69ab2b2009-03-30 21:46:45 +0200338 tristate "Fujitsu Siemens Computers sensor chips"
Hans de Goede0589c2d2009-01-07 16:37:33 +0100339 depends on X86 && I2C
Hans de Goede569ff102007-10-11 08:06:29 -0400340 help
Hans de Goedec69ab2b2009-03-30 21:46:45 +0200341 If you say yes here you get support for the following Fujitsu
342 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
Hans de Goedede15f092009-03-30 21:46:45 +0200343 Heimdall, Heracles, Hades and Syleus including support for the
344 integrated watchdog.
Hans de Goede569ff102007-10-11 08:06:29 -0400345
Hans de Goede0589c2d2009-01-07 16:37:33 +0100346 This is a merged driver for FSC sensor chips replacing the fscpos,
347 fscscy and fscher drivers and adding support for several other FSC
348 sensor chips.
Hans de Goede569ff102007-10-11 08:06:29 -0400349
350 This driver can also be built as a module. If so, the module
351 will be called fschmd.
352
Herbert Valerio Riedel3bcfa9e2009-04-06 19:00:30 -0700353config SENSORS_G760A
354 tristate "GMT G760A"
355 depends on I2C
356 help
357 If you say yes here you get support for Global Mixed-mode
358 Technology Inc G760A fan speed PWM controller chips.
359
360 This driver can also be built as a module. If so, the module
361 will be called g760a.
362
Jean Delvaread2f9312005-07-02 18:15:49 +0200363config SENSORS_GL518SM
364 tristate "Genesys Logic GL518SM"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200365 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200366 help
367 If you say yes here you get support for Genesys Logic GL518SM
368 sensor chips.
369
370 This driver can also be built as a module. If so, the module
371 will be called gl518sm.
372
373config SENSORS_GL520SM
374 tristate "Genesys Logic GL520SM"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200375 depends on I2C
Jean Delvare303760b2005-07-31 21:52:01 +0200376 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200377 help
378 If you say yes here you get support for Genesys Logic GL520SM
379 sensor chips.
380
381 This driver can also be built as a module. If so, the module
382 will be called gl520sm.
383
Simon Guinotd6fe1362010-10-22 00:44:19 +0200384config SENSORS_GPIO_FAN
385 tristate "GPIO fan"
386 depends on GENERIC_GPIO
387 help
388 If you say yes here you get support for fans connected to GPIO lines.
389
390 This driver can also be built as a module. If so, the module
391 will be called gpio-fan.
392
Rudolf Marekbebe4672007-05-08 17:22:02 +0200393config SENSORS_CORETEMP
Rudolf Marek708a62b2009-09-23 22:59:42 +0200394 tristate "Intel Core/Core2/Atom temperature sensor"
Yong Wang1fe63ab2010-01-10 20:52:34 +0100395 depends on X86 && PCI && EXPERIMENTAL
Rudolf Marekbebe4672007-05-08 17:22:02 +0200396 help
397 If you say yes here you get support for the temperature
Rudolf Marek708a62b2009-09-23 22:59:42 +0200398 sensor inside your CPU. Most of the family 6 CPUs
Chen Gongf3cffe42010-08-09 17:21:10 -0700399 are supported. Check Documentation/hwmon/coretemp for details.
Rudolf Marekbebe4672007-05-08 17:22:02 +0200400
Fenghua Yucb84b192010-07-29 17:13:43 -0700401config SENSORS_PKGTEMP
402 tristate "Intel processor package temperature sensor"
Jan Beulich0eae7792010-09-13 10:24:47 +0000403 depends on X86 && EXPERIMENTAL
Fenghua Yucb84b192010-07-29 17:13:43 -0700404 help
405 If you say yes here you get support for the package level temperature
406 sensor inside your CPU. Check documentation/driver for details.
407
Darrick J. Wong8808a792008-05-23 13:04:25 -0700408config SENSORS_IBMAEM
409 tristate "IBM Active Energy Manager temperature/power sensors and control"
410 select IPMI_SI
411 depends on IPMI_HANDLER
412 help
413 If you say yes here you get support for the temperature and
414 power sensors and capping hardware in various IBM System X
415 servers that support Active Energy Manager. This includes
416 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
Darrick J. Wong80704082009-06-15 18:39:46 +0200417 and certain HC10/HS2x/LS2x/QS2x blades.
Darrick J. Wong8808a792008-05-23 13:04:25 -0700418
419 This driver can also be built as a module. If so, the module
420 will be called ibmaem.
421
Darrick J. Wong57c7c3a2007-09-14 12:33:46 -0700422config SENSORS_IBMPEX
423 tristate "IBM PowerExecutive temperature/power sensors"
424 select IPMI_SI
425 depends on IPMI_HANDLER
426 help
427 If you say yes here you get support for the temperature and
428 power sensors in various IBM System X servers that support
Darrick J. Wong3d960a92008-03-19 17:00:48 -0700429 PowerExecutive. So far this includes the x3350, x3550, x3650,
430 x3655, and x3755; the x3800, x3850, and x3950 models that have
431 PCI Express; and some of the HS2x, LS2x, and QS2x blades.
Darrick J. Wong57c7c3a2007-09-14 12:33:46 -0700432
433 This driver can also be built as a module. If so, the module
434 will be called ibmpex.
435
Jean Delvaread2f9312005-07-02 18:15:49 +0200436config SENSORS_IT87
437 tristate "ITE IT87xx and compatibles"
Jean Delvare303760b2005-07-31 21:52:01 +0200438 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200439 help
Jean Delvare87673dd2006-08-28 14:37:19 +0200440 If you say yes here you get support for ITE IT8705F, IT8712F,
Jean Delvare44c1bcd2010-10-28 20:31:51 +0200441 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
442 chips, and the SiS960 clone.
Jean Delvaread2f9312005-07-02 18:15:49 +0200443
444 This driver can also be built as a module. If so, the module
445 will be called it87.
446
Lars-Peter Clausen7f983ba2010-06-19 18:32:58 +0000447config SENSORS_JZ4740
448 tristate "Ingenic JZ4740 SoC ADC driver"
449 depends on MACH_JZ4740 && MFD_JZ4740_ADC
450 help
451 If you say yes here you get support for reading adc values from the ADCIN
452 pin on Ingenic JZ4740 SoC based boards.
453
454 This driver can also be build as a module. If so, the module will be
455 called jz4740-hwmon.
456
Guenter Roeck4453d732010-08-09 17:21:08 -0700457config SENSORS_JC42
Clemens Ladischd5622f52011-02-16 08:02:08 -0500458 tristate "JEDEC JC42.4 compliant memory module temperature sensors"
Randy Dunlap4bd26912010-08-14 21:09:01 +0200459 depends on I2C
Guenter Roeck4453d732010-08-09 17:21:08 -0700460 help
Clemens Ladischd5622f52011-02-16 08:02:08 -0500461 If you say yes here, you get support for JEDEC JC42.4 compliant
462 temperature sensors, which are used on many DDR3 memory modules for
463 mobile devices and servers. Support will include, but not be limited
464 to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
465 MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
Guenter Roeck4453d732010-08-09 17:21:08 -0700466
467 This driver can also be built as a module. If so, the module
468 will be called jc42.
469
Guenter Roeck502b5a02010-09-29 20:12:08 -0700470config SENSORS_LINEAGE
471 tristate "Lineage Compact Power Line Power Entry Module"
472 depends on I2C && EXPERIMENTAL
473 help
474 If you say yes here you get support for the Lineage Compact Power Line
475 series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
476 CP2000DC, CP2725, and others.
477
478 This driver can also be built as a module. If so, the module
479 will be called lineage-pem.
480
Jean Delvaread2f9312005-07-02 18:15:49 +0200481config SENSORS_LM63
Matthew Garrett10f2ed32010-05-27 19:58:38 +0200482 tristate "National Semiconductor LM63 and LM64"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200483 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200484 help
Matthew Garrett10f2ed32010-05-27 19:58:38 +0200485 If you say yes here you get support for the National
486 Semiconductor LM63 and LM64 remote diode digital temperature
487 sensors with integrated fan control. Such chips are found
488 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
489 others.
Jean Delvaread2f9312005-07-02 18:15:49 +0200490
491 This driver can also be built as a module. If so, the module
492 will be called lm63.
493
Kaiwan N Billimoriae1a8e912006-06-12 22:00:05 +0200494config SENSORS_LM70
Manuel Laussc8ac32e2009-01-07 16:37:34 +0100495 tristate "National Semiconductor LM70 / Texas Instruments TMP121"
Jean Delvare0b22ce32010-10-28 20:31:50 +0200496 depends on SPI_MASTER
Kaiwan N Billimoriae1a8e912006-06-12 22:00:05 +0200497 help
498 If you say yes here you get support for the National Semiconductor
Manuel Laussc8ac32e2009-01-07 16:37:34 +0100499 LM70 and Texas Instruments TMP121/TMP123 digital temperature
500 sensor chips.
Kaiwan N Billimoriae1a8e912006-06-12 22:00:05 +0200501
502 This driver can also be built as a module. If so, the module
503 will be called lm70.
504
Adrien Demarez4e233cb2009-12-09 20:35:50 +0100505config SENSORS_LM73
506 tristate "National Semiconductor LM73"
507 depends on I2C
508 help
509 If you say yes here you get support for National Semiconductor LM73
510 sensor chips.
511 This driver can also be built as a module. If so, the module
512 will be called lm73.
513
Jean Delvaread2f9312005-07-02 18:15:49 +0200514config SENSORS_LM75
515 tristate "National Semiconductor LM75 and compatibles"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200516 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200517 help
David Brownell01a52392008-04-21 12:10:53 -0700518 If you say yes here you get support for one common type of
519 temperature sensor chip, with models including:
Jean Delvaread2f9312005-07-02 18:15:49 +0200520
David Brownell01a52392008-04-21 12:10:53 -0700521 - Dallas Semiconductor DS75 and DS1775
522 - Maxim MAX6625 and MAX6626
523 - Microchip MCP980x
524 - National Semiconductor LM75
525 - NXP's LM75A
526 - ST Microelectronics STDS75
527 - TelCom (now Microchip) TCN75
Shubhrajyoti Datta6d034052010-05-27 19:59:03 +0200528 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
529 TMP275
David Brownell01a52392008-04-21 12:10:53 -0700530
David Brownell9ebd3d82008-05-03 19:33:15 -0700531 This driver supports driver model based binding through board
532 specific I2C device tables.
533
534 It also supports the "legacy" style of driver binding. To use
535 that with some chips which don't replicate LM75 quirks exactly,
536 you may need the "force" module parameter.
Jean Delvaread2f9312005-07-02 18:15:49 +0200537
538 This driver can also be built as a module. If so, the module
539 will be called lm75.
540
541config SENSORS_LM77
542 tristate "National Semiconductor LM77"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200543 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200544 help
545 If you say yes here you get support for National Semiconductor LM77
546 sensor chips.
547
548 This driver can also be built as a module. If so, the module
549 will be called lm77.
550
551config SENSORS_LM78
552 tristate "National Semiconductor LM78 and compatibles"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200553 depends on I2C
Jean Delvare19f673e2005-07-31 22:12:09 +0200554 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200555 help
556 If you say yes here you get support for National Semiconductor LM78,
557 LM78-J and LM79.
558
559 This driver can also be built as a module. If so, the module
560 will be called lm78.
561
562config SENSORS_LM80
563 tristate "National Semiconductor LM80"
Jean Delvare0b22ce32010-10-28 20:31:50 +0200564 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200565 help
566 If you say yes here you get support for National Semiconductor
567 LM80 sensor chips.
568
569 This driver can also be built as a module. If so, the module
570 will be called lm80.
571
572config SENSORS_LM83
Jordan Crouse43cb7eb2006-03-23 16:19:49 +0100573 tristate "National Semiconductor LM83 and compatibles"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200574 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200575 help
576 If you say yes here you get support for National Semiconductor
Jordan Crouse43cb7eb2006-03-23 16:19:49 +0100577 LM82 and LM83 sensor chips.
Jean Delvaread2f9312005-07-02 18:15:49 +0200578
579 This driver can also be built as a module. If so, the module
580 will be called lm83.
581
582config SENSORS_LM85
583 tristate "National Semiconductor LM85 and compatibles"
Jean Delvare0b22ce32010-10-28 20:31:50 +0200584 depends on I2C
Jean Delvare303760b2005-07-31 21:52:01 +0200585 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200586 help
587 If you say yes here you get support for National Semiconductor LM85
Jean Delvarec36364d2010-10-28 20:31:50 +0200588 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
Jan Beulichf065a932011-02-18 03:18:26 -0500589 EMC6D101, EMC6D102, and EMC6D103.
Jean Delvaread2f9312005-07-02 18:15:49 +0200590
591 This driver can also be built as a module. If so, the module
592 will be called lm85.
593
594config SENSORS_LM87
Jean Delvarec7fa3732007-10-09 15:22:22 +0200595 tristate "National Semiconductor LM87 and compatibles"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200596 depends on I2C
Jean Delvare303760b2005-07-31 21:52:01 +0200597 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200598 help
599 If you say yes here you get support for National Semiconductor LM87
Jean Delvarec7fa3732007-10-09 15:22:22 +0200600 and Analog Devices ADM1024 sensor chips.
Jean Delvaread2f9312005-07-02 18:15:49 +0200601
602 This driver can also be built as a module. If so, the module
603 will be called lm87.
604
605config SENSORS_LM90
606 tristate "National Semiconductor LM90 and compatibles"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200607 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200608 help
609 If you say yes here you get support for National Semiconductor LM90,
Jean Delvare6771ea12010-03-05 22:17:13 +0100610 LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
Darrick J. Wong1a51e062009-03-12 13:36:38 +0100611 MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
Guenter Roeck06e1c0a2010-10-28 20:31:43 +0200612 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton
Jean Delvarec4f99a22010-10-28 20:31:44 +0200613 W83L771W/G/AWG/ASG sensor chips.
Jean Delvaread2f9312005-07-02 18:15:49 +0200614
615 This driver can also be built as a module. If so, the module
616 will be called lm90.
617
618config SENSORS_LM92
619 tristate "National Semiconductor LM92 and compatibles"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200620 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200621 help
622 If you say yes here you get support for National Semiconductor LM92
623 and Maxim MAX6635 sensor chips.
624
625 This driver can also be built as a module. If so, the module
626 will be called lm92.
627
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200628config SENSORS_LM93
629 tristate "National Semiconductor LM93 and compatibles"
Jean Delvaredabf3752007-08-29 12:19:00 +0200630 depends on I2C
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200631 select HWMON_VID
632 help
Guenter Roeckc7bf71c2011-01-17 12:48:20 -0800633 If you say yes here you get support for National Semiconductor LM93,
634 LM94, and compatible sensor chips.
Hans-Jürgen Koche46957e2007-07-05 17:58:29 +0200635
636 This driver can also be built as a module. If so, the module
637 will be called lm93.
638
per.dalen@appeartv.comde779012011-03-03 14:13:21 -0500639config SENSORS_LTC4151
640 tristate "Linear Technology LTC4151"
641 depends on I2C
642 default n
643 help
644 If you say yes here you get support for Linear Technology LTC4151
645 High Voltage I2C Current and Voltage Monitor interface.
646
647 This driver can also be built as a module. If so, the module will
648 be called ltc4151.
649
Ira Snyder72f5de92009-03-31 15:24:29 -0700650config SENSORS_LTC4215
651 tristate "Linear Technology LTC4215"
652 depends on I2C && EXPERIMENTAL
653 default n
654 help
655 If you say yes here you get support for Linear Technology LTC4215
656 Hot Swap Controller I2C interface.
657
658 This driver can also be built as a module. If so, the module will
659 be called ltc4215.
660
Ira Snyder6e34b182009-01-07 16:37:32 +0100661config SENSORS_LTC4245
662 tristate "Linear Technology LTC4245"
663 depends on I2C && EXPERIMENTAL
664 default n
665 help
666 If you say yes here you get support for Linear Technology LTC4245
667 Multiple Supply Hot Swap Controller I2C interface.
668
669 This driver can also be built as a module. If so, the module will
670 be called ltc4245.
671
Guenter Roecke5f5c992010-06-25 11:59:54 -0700672config SENSORS_LTC4261
673 tristate "Linear Technology LTC4261"
674 depends on I2C && EXPERIMENTAL
675 default n
676 help
677 If you say yes here you get support for Linear Technology LTC4261
678 Negative Voltage Hot Swap Controller I2C interface.
679
680 This driver can also be built as a module. If so, the module will
681 be called ltc4261.
682
Davide Rizzo06160322009-03-31 15:24:27 -0700683config SENSORS_LM95241
684 tristate "National Semiconductor LM95241 sensor chip"
685 depends on I2C
686 help
687 If you say yes here you get support for LM95241 sensor chip.
688
689 This driver can also be built as a module. If so, the module
690 will be called lm95241.
691
Eric Miao55b951e2008-08-29 04:26:48 +0800692config SENSORS_MAX1111
693 tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
694 depends on SPI_MASTER
695 help
696 Say y here to support Maxim's MAX1111 ADC chips.
697
698 This driver can also be built as a module. If so, the module
699 will be called max1111.
700
Jean Delvaread2f9312005-07-02 18:15:49 +0200701config SENSORS_MAX1619
702 tristate "Maxim MAX1619 sensor chip"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200703 depends on I2C
Jean Delvaread2f9312005-07-02 18:15:49 +0200704 help
705 If you say yes here you get support for MAX1619 sensor chip.
706
707 This driver can also be built as a module. If so, the module
708 will be called max1619.
709
stigge@antcom.dea5b79d62011-01-20 18:42:55 +0100710config SENSORS_MAX6639
711 tristate "Maxim MAX6639 sensor chip"
712 depends on I2C && EXPERIMENTAL
713 help
714 If you say yes here you get support for the MAX6639
715 sensor chips.
716
717 This driver can also be built as a module. If so, the module
718 will be called max6639.
719
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200720config SENSORS_MAX6650
721 tristate "Maxim MAX6650 sensor chip"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200722 depends on I2C && EXPERIMENTAL
Hans-Juergen Kochd20620d2007-05-08 17:22:00 +0200723 help
724 If you say yes here you get support for the MAX6650 / MAX6651
725 sensor chips.
726
727 This driver can also be built as a module. If so, the module
728 will be called max6650.
729
Jean Delvaread2f9312005-07-02 18:15:49 +0200730config SENSORS_PC87360
731 tristate "National Semiconductor PC87360 family"
Jean Delvare303760b2005-07-31 21:52:01 +0200732 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +0200733 help
734 If you say yes here you get access to the hardware monitoring
735 functions of the National Semiconductor PC8736x Super-I/O chips.
736 The PC87360, PC87363 and PC87364 only have fan monitoring and
737 control. The PC87365 and PC87366 additionally have voltage and
738 temperature monitoring.
739
740 This driver can also be built as a module. If so, the module
741 will be called pc87360.
742
Jean Delvareba224e22006-12-12 18:18:29 +0100743config SENSORS_PC87427
744 tristate "National Semiconductor PC87427"
Jean Delvareba224e22006-12-12 18:18:29 +0100745 help
746 If you say yes here you get access to the hardware monitoring
747 functions of the National Semiconductor PC87427 Super-I/O chip.
748 The chip has two distinct logical devices, one for fan speed
749 monitoring and control, and one for voltage and temperature
Jean Delvare008e5f32010-08-14 21:08:59 +0200750 monitoring. Fan speed monitoring and control are supported, as
751 well as temperature monitoring. Voltages aren't supported yet.
Jean Delvareba224e22006-12-12 18:18:29 +0100752
753 This driver can also be built as a module. If so, the module
754 will be called pc87427.
755
Jean Delvarefb4504f2009-03-30 21:46:43 +0200756config SENSORS_PCF8591
757 tristate "Philips PCF8591 ADC/DAC"
758 depends on I2C
759 default n
760 help
761 If you say yes here you get support for Philips PCF8591 4-channel
762 ADC, 1-channel DAC chips.
763
764 This driver can also be built as a module. If so, the module
765 will be called pcf8591.
766
767 These devices are hard to detect and rarely found on mainstream
768 hardware. If unsure, say N.
769
Guenter Roeck442aba72011-01-26 20:09:02 -0800770config PMBUS
771 tristate "PMBus support"
772 depends on I2C && EXPERIMENTAL
773 default n
774 help
775 Say yes here if you want to enable PMBus support.
776
777 This driver can also be built as a module. If so, the module will
778 be called pmbus_core.
779
780if PMBUS
781
782config SENSORS_PMBUS
783 tristate "Generic PMBus devices"
784 default n
785 help
786 If you say yes here you get hardware monitoring support for generic
787 PMBus devices, including but not limited to BMR450, BMR451, BMR453,
788 BMR454, and LTC2978.
789
790 This driver can also be built as a module. If so, the module will
791 be called pmbus.
792
Guenter Roeckdcb7d062011-01-26 20:14:26 -0800793config SENSORS_MAX16064
794 tristate "Maxim MAX16064"
795 default n
796 help
797 If you say yes here you get hardware monitoring support for Maxim
798 MAX16064.
799
800 This driver can also be built as a module. If so, the module will
801 be called max16064.
802
Guenter Roecka3eeb452011-01-26 20:15:27 -0800803config SENSORS_MAX34440
804 tristate "Maxim MAX34440/MAX34441"
805 default n
806 help
807 If you say yes here you get hardware monitoring support for Maxim
808 MAX34440 and MAX34441.
809
810 This driver can also be built as a module. If so, the module will
811 be called max34440.
812
Guenter Roeck8ea32382011-01-26 20:11:04 -0800813config SENSORS_MAX8688
814 tristate "Maxim MAX8688"
815 default n
816 help
817 If you say yes here you get hardware monitoring support for Maxim
818 MAX8688.
819
820 This driver can also be built as a module. If so, the module will
821 be called max8688.
822
Guenter Roeck442aba72011-01-26 20:09:02 -0800823endif # PMBUS
824
Jonathan Cameron251eb402009-04-13 14:39:45 -0700825config SENSORS_SHT15
826 tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
827 depends on GENERIC_GPIO
828 help
829 If you say yes here you get support for the Sensiron SHT10, SHT11,
830 SHT15, SHT71, SHT75 humidity and temperature sensors.
831
832 This driver can also be built as a module. If so, the module
833 will be called sht15.
834
Urs Fleisch430400b2011-01-07 07:15:39 +0000835config SENSORS_SHT21
836 tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
837 depends on I2C
838 help
839 If you say yes here you get support for the Sensiron SHT21, SHT25
840 humidity and temperature sensors.
841
842 This driver can also be built as a module. If so, the module
843 will be called sht21.
844
Ben Dooksbff78652009-07-18 10:12:28 +0100845config SENSORS_S3C
Maurus Cuelenaere62991f72010-10-28 20:31:44 +0200846 tristate "Samsung built-in ADC"
847 depends on S3C_ADC
Ben Dooksbff78652009-07-18 10:12:28 +0100848 help
849 If you say yes here you get support for the on-board ADCs of
Maurus Cuelenaere62991f72010-10-28 20:31:44 +0200850 the Samsung S3C24XX, S3C64XX and other series of SoC
Ben Dooksbff78652009-07-18 10:12:28 +0100851
852 This driver can also be built as a module. If so, the module
Maurus Cuelenaere62991f72010-10-28 20:31:44 +0200853 will be called s3c-hwmon.
Ben Dooksbff78652009-07-18 10:12:28 +0100854
855config SENSORS_S3C_RAW
856 bool "Include raw channel attributes in sysfs"
857 depends on SENSORS_S3C
858 help
859 Say Y here if you want to include raw copies of all the ADC
860 channels in sysfs.
861
Jean Delvaread2f9312005-07-02 18:15:49 +0200862config SENSORS_SIS5595
863 tristate "Silicon Integrated Systems Corp. SiS5595"
Jean Delvare17e7dc42007-06-09 10:11:16 -0400864 depends on PCI
Jean Delvaread2f9312005-07-02 18:15:49 +0200865 help
866 If you say yes here you get support for the integrated sensors in
867 SiS5595 South Bridges.
868
869 This driver can also be built as a module. If so, the module
870 will be called sis5595.
871
Guenter Roeck920fa1f2010-08-09 17:21:06 -0700872config SENSORS_SMM665
873 tristate "Summit Microelectronics SMM665"
874 depends on I2C && EXPERIMENTAL
875 default n
876 help
877 If you say yes here you get support for the hardware monitoring
878 features of the Summit Microelectronics SMM665/SMM665B Six-Channel
879 Active DC Output Controller / Monitor.
880
881 Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
882 Support for those chips is untested.
883
884 This driver can also be built as a module. If so, the module will
885 be called smm665.
886
Juerg Haefliger94319962007-06-09 10:11:16 -0400887config SENSORS_DME1737
Juerg Haefligere95c2372007-10-07 21:27:35 -0700888 tristate "SMSC DME1737, SCH311x and compatibles"
Juerg Haefliger94319962007-06-09 10:11:16 -0400889 depends on I2C && EXPERIMENTAL
890 select HWMON_VID
891 help
892 If you say yes here you get support for the hardware monitoring
Juerg Haefliger549edb82008-08-06 22:41:03 +0200893 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
894 Asus A8000 Super-I/O chips.
Juerg Haefliger94319962007-06-09 10:11:16 -0400895
896 This driver can also be built as a module. If so, the module
897 will be called dme1737.
898
Kalhan Trisaldac68312010-05-27 19:58:56 +0200899config SENSORS_EMC1403
Jekyll Lai7a1b76f2011-01-12 21:55:12 +0100900 tristate "SMSC EMC1403/23 thermal sensor"
Kalhan Trisaldac68312010-05-27 19:58:56 +0200901 depends on I2C
902 help
Jekyll Lai7a1b76f2011-01-12 21:55:12 +0100903 If you say yes here you get support for the SMSC EMC1403/23
Kalhan Trisaldac68312010-05-27 19:58:56 +0200904 temperature monitoring chip.
905
906 Threshold values can be configured using sysfs.
907 Data from the different diodes are accessible via sysfs.
908
Steve Glendinning9df73052010-08-14 21:08:54 +0200909config SENSORS_EMC2103
910 tristate "SMSC EMC2103"
911 depends on I2C
912 help
913 If you say yes here you get support for the temperature
914 and fan sensors of the SMSC EMC2103 chips.
915
916 This driver can also be built as a module. If so, the module
917 will be called emc2103.
918
Jean Delvaread2f9312005-07-02 18:15:49 +0200919config SENSORS_SMSC47M1
920 tristate "SMSC LPC47M10x and compatibles"
Jean Delvaread2f9312005-07-02 18:15:49 +0200921 help
922 If you say yes here you get support for the integrated fan
923 monitoring and control capabilities of the SMSC LPC47B27x,
Jean Delvare60917802006-10-08 22:00:44 +0200924 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
Jean Delvare8eccbb62007-05-08 17:21:59 +0200925 LPC47M192, LPC47M292 and LPC47M997 chips.
Hartmut Rick59ac8362006-03-23 16:37:23 +0100926
Jean Delvare8eccbb62007-05-08 17:21:59 +0200927 The temperature and voltage sensor features of the LPC47M15x,
928 LPC47M192, LPC47M292 and LPC47M997 are supported by another
929 driver, select also "SMSC LPC47M192 and compatibles" below for
930 those.
Jean Delvaread2f9312005-07-02 18:15:49 +0200931
932 This driver can also be built as a module. If so, the module
933 will be called smsc47m1.
934
Hartmut Rick59ac8362006-03-23 16:37:23 +0100935config SENSORS_SMSC47M192
936 tristate "SMSC LPC47M192 and compatibles"
Jean Delvare0b22ce32010-10-28 20:31:50 +0200937 depends on I2C
Hartmut Rick59ac8362006-03-23 16:37:23 +0100938 select HWMON_VID
939 help
940 If you say yes here you get support for the temperature and
Jean Delvare00cb4732007-05-08 17:21:59 +0200941 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
942 and LPC47M997 chips.
Hartmut Rick59ac8362006-03-23 16:37:23 +0100943
944 The fan monitoring and control capabilities of these chips
945 are supported by another driver, select
946 "SMSC LPC47M10x and compatibles" above. You need both drivers
947 if you want fan control and voltage/temperature sensor support.
948
949 This driver can also be built as a module. If so, the module
950 will be called smsc47m192.
951
Jean Delvaread2f9312005-07-02 18:15:49 +0200952config SENSORS_SMSC47B397
953 tristate "SMSC LPC47B397-NC"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +0200954 depends on EXPERIMENTAL
Jean Delvaread2f9312005-07-02 18:15:49 +0200955 help
956 If you say yes here you get support for the SMSC LPC47B397-NC
957 sensor chip.
958
959 This driver can also be built as a module. If so, the module
960 will be called smsc47b397.
961
Steve Hardy5812f922008-01-22 23:00:02 +0000962config SENSORS_ADS7828
963 tristate "Texas Instruments ADS7828"
964 depends on I2C
965 help
966 If you say yes here you get support for Texas Instruments ADS7828
967 12-bit 8-channel ADC device.
968
969 This driver can also be built as a module. If so, the module
970 will be called ads7828.
971
Paul Thomase0c70b82010-05-24 14:33:38 -0700972config SENSORS_ADS7871
973 tristate "Texas Instruments ADS7871 A/D converter"
974 depends on SPI
975 help
976 If you say yes here you get support for TI ADS7871 & ADS7870
977
978 This driver can also be built as a module. If so, the module
979 will be called ads7871.
980
Tomaz Merteljb5430a02010-01-08 14:43:04 -0800981config SENSORS_AMC6821
982 tristate "Texas Instruments AMC6821"
983 depends on I2C && EXPERIMENTAL
984 help
985 If you say yes here you get support for the Texas Instruments
986 AMC6821 hardware monitoring chips.
987
988 This driver can also be build as a module. If so, the module
989 will be called amc6821.
990
Krzysztof Heltadd77c62007-07-08 22:43:00 +0200991config SENSORS_THMC50
992 tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
Jean Delvare0b22ce32010-10-28 20:31:50 +0200993 depends on I2C
Krzysztof Heltadd77c62007-07-08 22:43:00 +0200994 help
995 If you say yes here you get support for Texas Instruments THMC50
996 sensor chips and clones: the Analog Devices ADM1022.
997
998 This driver can also be built as a module. If so, the module
999 will be called thmc50.
1000
Steven Kingbeb1b6b2010-05-27 19:58:56 +02001001config SENSORS_TMP102
Jean Delvarecff37c92010-05-27 19:58:57 +02001002 tristate "Texas Instruments TMP102"
Steven Kingbeb1b6b2010-05-27 19:58:56 +02001003 depends on I2C && EXPERIMENTAL
1004 help
1005 If you say yes here you get support for Texas Instruments TMP102
1006 sensor chips.
1007
1008 This driver can also be built as a module. If so, the module
1009 will be called tmp102.
1010
Hans de Goedeab2b79d2009-06-15 18:39:46 +02001011config SENSORS_TMP401
1012 tristate "Texas Instruments TMP401 and compatibles"
1013 depends on I2C && EXPERIMENTAL
1014 help
1015 If you say yes here you get support for Texas Instruments TMP401 and
1016 TMP411 temperature sensor chips.
1017
1018 This driver can also be built as a module. If so, the module
1019 will be called tmp401.
1020
Andre Prendel94107002009-09-15 17:18:11 +02001021config SENSORS_TMP421
1022 tristate "Texas Instruments TMP421 and compatible"
1023 depends on I2C && EXPERIMENTAL
1024 help
1025 If you say yes here you get support for Texas Instruments TMP421,
1026 TMP422 and TMP423 temperature sensor chips.
1027
1028 This driver can also be built as a module. If so, the module
1029 will be called tmp421.
1030
Harald Welte70c38772009-12-16 21:38:28 +01001031config SENSORS_VIA_CPUTEMP
1032 tristate "VIA CPU temperature sensor"
1033 depends on X86
1034 help
1035 If you say yes here you get support for the temperature
1036 sensor inside your CPU. Supported are all known variants of
1037 the VIA C7 and Nano.
1038
Jean Delvaread2f9312005-07-02 18:15:49 +02001039config SENSORS_VIA686A
1040 tristate "VIA686A"
Jean Delvare2ec342e2007-06-09 10:11:16 -04001041 depends on PCI
Jean Delvaread2f9312005-07-02 18:15:49 +02001042 help
1043 If you say yes here you get support for the integrated sensors in
1044 Via 686A/B South Bridges.
1045
1046 This driver can also be built as a module. If so, the module
1047 will be called via686a.
1048
Juerg Haefligerab413192006-09-24 20:54:04 +02001049config SENSORS_VT1211
1050 tristate "VIA VT1211"
Juerg Haefligerab413192006-09-24 20:54:04 +02001051 select HWMON_VID
1052 help
1053 If you say yes here then you get support for hardware monitoring
1054 features of the VIA VT1211 Super-I/O chip.
1055
1056 This driver can also be built as a module. If so, the module
1057 will be called vt1211.
1058
Roger Lucas1de9e372005-11-26 20:20:05 +01001059config SENSORS_VT8231
Jean Delvare51bd5632006-09-24 20:51:37 +02001060 tristate "VIA VT8231"
Roger Lucasec5e1a42007-06-12 21:04:08 +02001061 depends on PCI
Roger Lucas1de9e372005-11-26 20:20:05 +01001062 select HWMON_VID
Roger Lucas1de9e372005-11-26 20:20:05 +01001063 help
1064 If you say yes here then you get support for the integrated sensors
1065 in the VIA VT8231 device.
1066
1067 This driver can also be built as a module. If so, the module
1068 will be called vt8231.
1069
Jean Delvaread2f9312005-07-02 18:15:49 +02001070config SENSORS_W83781D
Jean Delvare05663362007-11-30 23:51:24 +01001071 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +02001072 depends on I2C
Jean Delvare303760b2005-07-31 21:52:01 +02001073 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +02001074 help
1075 If you say yes here you get support for the Winbond W8378x series
Jean Delvare05663362007-11-30 23:51:24 +01001076 of sensor chips: the W83781D, W83782D and W83783S, and the similar
1077 Asus AS99127F.
Jean Delvaread2f9312005-07-02 18:15:49 +02001078
1079 This driver can also be built as a module. If so, the module
1080 will be called w83781d.
1081
Charles Spirakis98739642006-04-25 14:21:03 +02001082config SENSORS_W83791D
1083 tristate "Winbond W83791D"
Marc Hulsmand1ebd592009-12-09 20:35:58 +01001084 depends on I2C
Charles Spirakis98739642006-04-25 14:21:03 +02001085 select HWMON_VID
1086 help
1087 If you say yes here you get support for the Winbond W83791D chip.
1088
1089 This driver can also be built as a module. If so, the module
1090 will be called w83791d.
1091
R.Marek@sh.cvut.cz5563e272005-07-27 11:43:47 +00001092config SENSORS_W83792D
1093 tristate "Winbond W83792D"
Jean Delvare0b22ce32010-10-28 20:31:50 +02001094 depends on I2C
R.Marek@sh.cvut.cz5563e272005-07-27 11:43:47 +00001095 help
1096 If you say yes here you get support for the Winbond W83792D chip.
1097
1098 This driver can also be built as a module. If so, the module
1099 will be called w83792d.
1100
Rudolf Marek6800c3d2006-12-12 18:18:30 +01001101config SENSORS_W83793
1102 tristate "Winbond W83793"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +02001103 depends on I2C && EXPERIMENTAL
Stefano Brivio7a5e6bc2007-03-16 13:38:29 -08001104 select HWMON_VID
Rudolf Marek6800c3d2006-12-12 18:18:30 +01001105 help
1106 If you say yes here you get support for the Winbond W83793
Sven Anders5852f962010-03-05 22:17:22 +01001107 hardware monitoring chip, including support for the integrated
1108 watchdog.
Rudolf Marek6800c3d2006-12-12 18:18:30 +01001109
1110 This driver can also be built as a module. If so, the module
1111 will be called w83793.
1112
Wei Song792d3762010-10-28 20:31:44 +02001113config SENSORS_W83795
1114 tristate "Winbond/Nuvoton W83795G/ADG"
1115 depends on I2C && EXPERIMENTAL
1116 help
1117 If you say yes here you get support for the Winbond W83795G and
1118 W83795ADG hardware monitoring chip.
1119
1120 This driver can also be built as a module. If so, the module
1121 will be called w83795.
1122
Jean Delvare00030af2010-10-28 20:31:49 +02001123config SENSORS_W83795_FANCTRL
1124 boolean "Include fan control support (DANGEROUS)"
1125 depends on SENSORS_W83795 && EXPERIMENTAL
1126 default n
1127 help
1128 If you say yes here, support for the both manual and automatic
1129 fan control features will be included in the driver.
1130
1131 This part of the code wasn't carefully reviewed and tested yet,
1132 so enabling this option is strongly discouraged on production
1133 servers. Only developers and testers should enable it for the
1134 time being.
1135
1136 Please also note that this option will create sysfs attribute
1137 files which may change in the future, so you shouldn't rely
1138 on them being stable.
1139
Jean Delvaread2f9312005-07-02 18:15:49 +02001140config SENSORS_W83L785TS
1141 tristate "Winbond W83L785TS-S"
Jan Engelhardt1d72acf2007-05-08 17:22:04 +02001142 depends on I2C && EXPERIMENTAL
Jean Delvaread2f9312005-07-02 18:15:49 +02001143 help
1144 If you say yes here you get support for the Winbond W83L785TS-S
1145 sensor chip, which is used on the Asus A7N8X, among other
1146 motherboards.
1147
1148 This driver can also be built as a module. If so, the module
1149 will be called w83l785ts.
1150
Kevin Lo85f03bc2007-11-23 09:31:52 +08001151config SENSORS_W83L786NG
1152 tristate "Winbond W83L786NG, W83L786NR"
1153 depends on I2C && EXPERIMENTAL
1154 help
1155 If you say yes here you get support for the Winbond W83L786NG
1156 and W83L786NR sensor chips.
1157
1158 This driver can also be built as a module. If so, the module
1159 will be called w83l786ng.
1160
Jean Delvaread2f9312005-07-02 18:15:49 +02001161config SENSORS_W83627HF
Jean Delvarec2db6ce2006-01-18 23:22:12 +01001162 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
Jean Delvare303760b2005-07-31 21:52:01 +02001163 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +02001164 help
1165 If you say yes here you get support for the Winbond W836X7 series
Jean Delvarec2db6ce2006-01-18 23:22:12 +01001166 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1167 W83697HF.
Jean Delvaread2f9312005-07-02 18:15:49 +02001168
1169 This driver can also be built as a module. If so, the module
1170 will be called w83627hf.
1171
1172config SENSORS_W83627EHF
Guenter Roeck2dd59c22011-02-22 08:20:51 -08001173 tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
Jean Delvarefc18d6c2007-06-24 11:19:42 +02001174 select HWMON_VID
Jean Delvaread2f9312005-07-02 18:15:49 +02001175 help
David Hubbard658291f2007-06-24 11:15:03 +02001176 If you say yes here you get support for the hardware
Jean Delvaread2f9312005-07-02 18:15:49 +02001177 monitoring functionality of the Winbond W83627EHF Super-I/O chip.
Jean Delvaread2f9312005-07-02 18:15:49 +02001178
Jean Delvare8dd2d2c2005-07-27 21:33:15 +02001179 This driver also supports the W83627EHG, which is the lead-free
David Hubbard658291f2007-06-24 11:15:03 +02001180 version of the W83627EHF, and the W83627DHG, which is a similar
1181 chip suited for specific Intel processors that use PECI such as
1182 the Core 2 Duo.
Jean Delvare8dd2d2c2005-07-27 21:33:15 +02001183
Guenter Roeck2dd59c22011-02-22 08:20:51 -08001184 This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1185 (also known as W83667HG-I), and NCT6776F.
Gong Jun237c8d2f2009-03-30 21:46:42 +02001186
Jean Delvaread2f9312005-07-02 18:15:49 +02001187 This driver can also be built as a module. If so, the module
1188 will be called w83627ehf.
1189
Mark Brown08bad5a2009-07-28 15:52:22 +01001190config SENSORS_WM831X
1191 tristate "WM831x PMICs"
1192 depends on MFD_WM831X
1193 help
1194 If you say yes here you get support for the hardware
1195 monitoring functionality of the Wolfson Microelectronics
1196 WM831x series of PMICs.
1197
1198 This driver can also be built as a module. If so, the module
1199 will be called wm831x-hwmon.
1200
Mark Brownfb6c0232009-07-20 12:43:45 +01001201config SENSORS_WM8350
1202 tristate "Wolfson Microelectronics WM835x"
1203 depends on MFD_WM8350
1204 help
1205 If you say yes here you get support for the hardware
1206 monitoring features of the WM835x series of PMICs.
1207
1208 This driver can also be built as a module. If so, the module
1209 will be called wm8350-hwmon.
1210
David S. Millere0418082008-08-24 20:59:49 -07001211config SENSORS_ULTRA45
1212 tristate "Sun Ultra45 PIC16F747"
1213 depends on SPARC64
1214 help
1215 This driver provides support for the Ultra45 workstation environmental
1216 sensors.
1217
Daniel Mackbb233fd2009-03-31 15:24:33 -07001218config SENSORS_LIS3_SPI
1219 tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
1220 depends on !ACPI && SPI_MASTER && INPUT
Eric Pieldc6ea972009-06-16 15:34:15 -07001221 select INPUT_POLLDEV
Daniel Mackbb233fd2009-03-31 15:24:33 -07001222 default n
1223 help
1224 This driver provides support for the LIS3LV02Dx accelerometer connected
1225 via SPI. The accelerometer data is readable via
1226 /sys/devices/platform/lis3lv02d.
1227
1228 This driver also provides an absolute input class device, allowing
1229 the laptop to act as a pinball machine-esque joystick.
1230
1231 This driver can also be built as modules. If so, the core module
1232 will be called lis3lv02d and a specific module for the SPI transport
1233 is called lis3lv02d_spi.
1234
Samu Onkalo312ea072009-12-17 15:27:07 -08001235config SENSORS_LIS3_I2C
1236 tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
1237 depends on I2C && INPUT
1238 select INPUT_POLLDEV
1239 default n
1240 help
1241 This driver provides support for the LIS3LV02Dx accelerometer connected
1242 via I2C. The accelerometer data is readable via
1243 /sys/devices/platform/lis3lv02d.
1244
1245 This driver also provides an absolute input class device, allowing
1246 the device to act as a pinball machine-esque joystick.
1247
1248 This driver can also be built as modules. If so, the core module
1249 will be called lis3lv02d and a specific module for the I2C transport
1250 is called lis3lv02d_i2c.
1251
Nicolas Boichat6f2fad72007-05-08 00:24:52 -07001252config SENSORS_APPLESMC
1253 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
Jean Delvare548c3432007-05-27 22:17:43 +02001254 depends on INPUT && X86
Nicolas Boichat6f2fad72007-05-08 00:24:52 -07001255 select NEW_LEDS
1256 select LEDS_CLASS
Dmitry Torokhovd5cf2b92007-09-26 00:01:35 -04001257 select INPUT_POLLDEV
Nicolas Boichat6f2fad72007-05-08 00:24:52 -07001258 default n
1259 help
1260 This driver provides support for the Apple System Management
1261 Controller, which provides an accelerometer (Apple Sudden Motion
1262 Sensor), light sensors, temperature sensors, keyboard backlight
1263 control and fan control.
1264
1265 Only Intel-based Apple's computers are supported (MacBook Pro,
1266 MacBook, MacMini).
1267
1268 Data from the different sensors, keyboard backlight control and fan
1269 control are accessible via sysfs.
1270
1271 This driver also provides an absolute input class device, allowing
1272 the laptop to act as a pinball machine-esque joystick.
1273
1274 Say Y here if you have an applicable laptop and want to experience
1275 the awesome power of applesmc.
1276
Luotao Fu93ee0a72009-12-09 20:35:58 +01001277config SENSORS_MC13783_ADC
1278 tristate "Freescale MC13783 ADC"
1279 depends on MFD_MC13783
1280 help
1281 Support for the A/D converter on MC13783 PMIC.
1282
Jean Delvare61cba5c2009-09-15 17:18:13 +02001283if ACPI
1284
1285comment "ACPI drivers"
1286
1287config SENSORS_ATK0110
1288 tristate "ASUS ATK0110"
1289 depends on X86 && EXPERIMENTAL
1290 help
1291 If you say yes here you get support for the ACPI hardware
1292 monitoring interface found in many ASUS motherboards. This
1293 driver will provide readings of fans, voltages and temperatures
1294 through the system firmware.
1295
1296 This driver can also be built as a module. If so, the module
1297 will be called asus_atk0110.
1298
1299config SENSORS_LIS3LV02D
Éric Pielbc62c142009-12-14 18:01:39 -08001300 tristate "STMicroeletronics LIS3* three-axis digital accelerometer"
Jean Delvare61cba5c2009-09-15 17:18:13 +02001301 depends on INPUT
1302 select INPUT_POLLDEV
1303 select NEW_LEDS
1304 select LEDS_CLASS
Jean Delvaread2f9312005-07-02 18:15:49 +02001305 default n
1306 help
Éric Pielbc62c142009-12-14 18:01:39 -08001307 This driver provides support for the LIS3* accelerometers, such as the
1308 LIS3LV02DL or the LIS331DL. In particular, it can be found in a number
1309 of HP laptops, which have the "Mobile Data Protection System 3D" or
1310 "3D DriveGuard" feature. On such systems the driver should load
1311 automatically (via ACPI alias). The accelerometer might also be found
1312 in other systems, connected via SPI or I2C. The accelerometer data is
1313 readable via /sys/devices/platform/lis3lv02d.
Jean Delvare61cba5c2009-09-15 17:18:13 +02001314
1315 This driver also provides an absolute input class device, allowing
Éric Pielbc62c142009-12-14 18:01:39 -08001316 a laptop to act as a pinball machine-esque joystick. It provides also
1317 a misc device which can be used to detect free-fall. On HP laptops,
Jean Delvare61cba5c2009-09-15 17:18:13 +02001318 if the led infrastructure is activated, support for a led indicating
Éric Pielbc62c142009-12-14 18:01:39 -08001319 disk protection will be provided as hp::hddprotect. For more
1320 information on the feature, refer to Documentation/hwmon/lis3lv02d.
Jean Delvare61cba5c2009-09-15 17:18:13 +02001321
1322 This driver can also be built as modules. If so, the core module
1323 will be called lis3lv02d and a specific module for HP laptops will be
1324 called hp_accel.
1325
1326 Say Y here if you have an applicable laptop and want to experience
1327 the awesome power of lis3lv02d.
1328
1329endif # ACPI
Jean Delvaread2f9312005-07-02 18:15:49 +02001330
Jan Engelhardt1d72acf2007-05-08 17:22:04 +02001331endif # HWMON