blob: 9221653590a833568d3759b7ea8ee86df8f857c3 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 adm1031.c - Part of lm_sensors, Linux kernel modules for hardware
3 monitoring
4 Based on lm75.c and lm85.c
5 Supports adm1030 / adm1031
6 Copyright (C) 2004 Alexandre d'Alton <alex@alexdalton.org>
7 Reworked by Jean Delvare <khali@linux-fr.org>
8
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2 of the License, or
12 (at your option) any later version.
13
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
18
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22*/
23
24#include <linux/module.h>
25#include <linux/init.h>
26#include <linux/slab.h>
27#include <linux/jiffies.h>
28#include <linux/i2c.h>
29#include <linux/i2c-sensor.h>
Mark M. Hoffman943b0832005-07-15 21:39:18 -040030#include <linux/hwmon.h>
31#include <linux/err.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070032
33/* Following macros takes channel parameter starting from 0 to 2 */
34#define ADM1031_REG_FAN_SPEED(nr) (0x08 + (nr))
35#define ADM1031_REG_FAN_DIV(nr) (0x20 + (nr))
36#define ADM1031_REG_PWM (0x22)
37#define ADM1031_REG_FAN_MIN(nr) (0x10 + (nr))
38
39#define ADM1031_REG_TEMP_MAX(nr) (0x14 + 4*(nr))
40#define ADM1031_REG_TEMP_MIN(nr) (0x15 + 4*(nr))
41#define ADM1031_REG_TEMP_CRIT(nr) (0x16 + 4*(nr))
42
43#define ADM1031_REG_TEMP(nr) (0xa + (nr))
44#define ADM1031_REG_AUTO_TEMP(nr) (0x24 + (nr))
45
46#define ADM1031_REG_STATUS(nr) (0x2 + (nr))
47
48#define ADM1031_REG_CONF1 0x0
49#define ADM1031_REG_CONF2 0x1
50#define ADM1031_REG_EXT_TEMP 0x6
51
52#define ADM1031_CONF1_MONITOR_ENABLE 0x01 /* Monitoring enable */
53#define ADM1031_CONF1_PWM_INVERT 0x08 /* PWM Invert */
54#define ADM1031_CONF1_AUTO_MODE 0x80 /* Auto FAN */
55
56#define ADM1031_CONF2_PWM1_ENABLE 0x01
57#define ADM1031_CONF2_PWM2_ENABLE 0x02
58#define ADM1031_CONF2_TACH1_ENABLE 0x04
59#define ADM1031_CONF2_TACH2_ENABLE 0x08
60#define ADM1031_CONF2_TEMP_ENABLE(chan) (0x10 << (chan))
61
62/* Addresses to scan */
63static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
Linus Torvalds1da177e2005-04-16 15:20:36 -070064
65/* Insmod parameters */
66SENSORS_INSMOD_2(adm1030, adm1031);
67
68typedef u8 auto_chan_table_t[8][2];
69
70/* Each client has this additional data */
71struct adm1031_data {
72 struct i2c_client client;
Mark M. Hoffman943b0832005-07-15 21:39:18 -040073 struct class_device *class_dev;
Linus Torvalds1da177e2005-04-16 15:20:36 -070074 struct semaphore update_lock;
75 int chip_type;
76 char valid; /* !=0 if following fields are valid */
77 unsigned long last_updated; /* In jiffies */
78 /* The chan_select_table contains the possible configurations for
79 * auto fan control.
80 */
81 auto_chan_table_t *chan_select_table;
82 u16 alarm;
83 u8 conf1;
84 u8 conf2;
85 u8 fan[2];
86 u8 fan_div[2];
87 u8 fan_min[2];
88 u8 pwm[2];
89 u8 old_pwm[2];
90 s8 temp[3];
91 u8 ext_temp[3];
92 u8 auto_temp[3];
93 u8 auto_temp_min[3];
94 u8 auto_temp_off[3];
95 u8 auto_temp_max[3];
96 s8 temp_min[3];
97 s8 temp_max[3];
98 s8 temp_crit[3];
99};
100
101static int adm1031_attach_adapter(struct i2c_adapter *adapter);
102static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind);
103static void adm1031_init_client(struct i2c_client *client);
104static int adm1031_detach_client(struct i2c_client *client);
105static struct adm1031_data *adm1031_update_device(struct device *dev);
106
107/* This is the driver that will be inserted */
108static struct i2c_driver adm1031_driver = {
109 .owner = THIS_MODULE,
110 .name = "adm1031",
111 .flags = I2C_DF_NOTIFY,
112 .attach_adapter = adm1031_attach_adapter,
113 .detach_client = adm1031_detach_client,
114};
115
116static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg)
117{
118 return i2c_smbus_read_byte_data(client, reg);
119}
120
121static inline int
122adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value)
123{
124 return i2c_smbus_write_byte_data(client, reg, value);
125}
126
127
128#define TEMP_TO_REG(val) (((val) < 0 ? ((val - 500) / 1000) : \
129 ((val + 500) / 1000)))
130
131#define TEMP_FROM_REG(val) ((val) * 1000)
132
133#define TEMP_FROM_REG_EXT(val, ext) (TEMP_FROM_REG(val) + (ext) * 125)
134
135#define FAN_FROM_REG(reg, div) ((reg) ? (11250 * 60) / ((reg) * (div)) : 0)
136
137static int FAN_TO_REG(int reg, int div)
138{
139 int tmp;
140 tmp = FAN_FROM_REG(SENSORS_LIMIT(reg, 0, 65535), div);
141 return tmp > 255 ? 255 : tmp;
142}
143
144#define FAN_DIV_FROM_REG(reg) (1<<(((reg)&0xc0)>>6))
145
146#define PWM_TO_REG(val) (SENSORS_LIMIT((val), 0, 255) >> 4)
147#define PWM_FROM_REG(val) ((val) << 4)
148
149#define FAN_CHAN_FROM_REG(reg) (((reg) >> 5) & 7)
150#define FAN_CHAN_TO_REG(val, reg) \
151 (((reg) & 0x1F) | (((val) << 5) & 0xe0))
152
153#define AUTO_TEMP_MIN_TO_REG(val, reg) \
154 ((((val)/500) & 0xf8)|((reg) & 0x7))
155#define AUTO_TEMP_RANGE_FROM_REG(reg) (5000 * (1<< ((reg)&0x7)))
156#define AUTO_TEMP_MIN_FROM_REG(reg) (1000 * ((((reg) >> 3) & 0x1f) << 2))
157
158#define AUTO_TEMP_MIN_FROM_REG_DEG(reg) ((((reg) >> 3) & 0x1f) << 2)
159
160#define AUTO_TEMP_OFF_FROM_REG(reg) \
161 (AUTO_TEMP_MIN_FROM_REG(reg) - 5000)
162
163#define AUTO_TEMP_MAX_FROM_REG(reg) \
164 (AUTO_TEMP_RANGE_FROM_REG(reg) + \
165 AUTO_TEMP_MIN_FROM_REG(reg))
166
167static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm)
168{
169 int ret;
170 int range = val - AUTO_TEMP_MIN_FROM_REG(reg);
171
172 range = ((val - AUTO_TEMP_MIN_FROM_REG(reg))*10)/(16 - pwm);
173 ret = ((reg & 0xf8) |
174 (range < 10000 ? 0 :
175 range < 20000 ? 1 :
176 range < 40000 ? 2 : range < 80000 ? 3 : 4));
177 return ret;
178}
179
180/* FAN auto control */
181#define GET_FAN_AUTO_BITFIELD(data, idx) \
182 (*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx%2]
183
184/* The tables below contains the possible values for the auto fan
185 * control bitfields. the index in the table is the register value.
186 * MSb is the auto fan control enable bit, so the four first entries
187 * in the table disables auto fan control when both bitfields are zero.
188 */
189static auto_chan_table_t auto_channel_select_table_adm1031 = {
190 {0, 0}, {0, 0}, {0, 0}, {0, 0},
191 {2 /*0b010 */ , 4 /*0b100 */ },
192 {2 /*0b010 */ , 2 /*0b010 */ },
193 {4 /*0b100 */ , 4 /*0b100 */ },
194 {7 /*0b111 */ , 7 /*0b111 */ },
195};
196
197static auto_chan_table_t auto_channel_select_table_adm1030 = {
198 {0, 0}, {0, 0}, {0, 0}, {0, 0},
199 {2 /*0b10 */ , 0},
200 {0xff /*invalid */ , 0},
201 {0xff /*invalid */ , 0},
202 {3 /*0b11 */ , 0},
203};
204
205/* That function checks if a bitfield is valid and returns the other bitfield
206 * nearest match if no exact match where found.
207 */
208static int
209get_fan_auto_nearest(struct adm1031_data *data,
210 int chan, u8 val, u8 reg, u8 * new_reg)
211{
212 int i;
213 int first_match = -1, exact_match = -1;
214 u8 other_reg_val =
215 (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1];
216
217 if (val == 0) {
218 *new_reg = 0;
219 return 0;
220 }
221
222 for (i = 0; i < 8; i++) {
223 if ((val == (*data->chan_select_table)[i][chan]) &&
224 ((*data->chan_select_table)[i][chan ? 0 : 1] ==
225 other_reg_val)) {
226 /* We found an exact match */
227 exact_match = i;
228 break;
229 } else if (val == (*data->chan_select_table)[i][chan] &&
230 first_match == -1) {
231 /* Save the first match in case of an exact match has not been
232 * found
233 */
234 first_match = i;
235 }
236 }
237
238 if (exact_match >= 0) {
239 *new_reg = exact_match;
240 } else if (first_match >= 0) {
241 *new_reg = first_match;
242 } else {
243 return -EINVAL;
244 }
245 return 0;
246}
247
248static ssize_t show_fan_auto_channel(struct device *dev, char *buf, int nr)
249{
250 struct adm1031_data *data = adm1031_update_device(dev);
251 return sprintf(buf, "%d\n", GET_FAN_AUTO_BITFIELD(data, nr));
252}
253
254static ssize_t
255set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr)
256{
257 struct i2c_client *client = to_i2c_client(dev);
258 struct adm1031_data *data = i2c_get_clientdata(client);
259 int val = simple_strtol(buf, NULL, 10);
260 u8 reg;
261 int ret;
262 u8 old_fan_mode;
263
264 old_fan_mode = data->conf1;
265
266 down(&data->update_lock);
267
268 if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, &reg))) {
269 up(&data->update_lock);
270 return ret;
271 }
272 if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^
273 (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) {
274 if (data->conf1 & ADM1031_CONF1_AUTO_MODE){
275 /* Switch to Auto Fan Mode
276 * Save PWM registers
277 * Set PWM registers to 33% Both */
278 data->old_pwm[0] = data->pwm[0];
279 data->old_pwm[1] = data->pwm[1];
280 adm1031_write_value(client, ADM1031_REG_PWM, 0x55);
281 } else {
282 /* Switch to Manual Mode */
283 data->pwm[0] = data->old_pwm[0];
284 data->pwm[1] = data->old_pwm[1];
285 /* Restore PWM registers */
286 adm1031_write_value(client, ADM1031_REG_PWM,
287 data->pwm[0] | (data->pwm[1] << 4));
288 }
289 }
290 data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
291 adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1);
292 up(&data->update_lock);
293 return count;
294}
295
296#define fan_auto_channel_offset(offset) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400297static ssize_t show_fan_auto_channel_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298{ \
299 return show_fan_auto_channel(dev, buf, offset - 1); \
300} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400301static ssize_t set_fan_auto_channel_##offset (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700302 const char *buf, size_t count) \
303{ \
304 return set_fan_auto_channel(dev, buf, count, offset - 1); \
305} \
306static DEVICE_ATTR(auto_fan##offset##_channel, S_IRUGO | S_IWUSR, \
307 show_fan_auto_channel_##offset, \
308 set_fan_auto_channel_##offset)
309
310fan_auto_channel_offset(1);
311fan_auto_channel_offset(2);
312
313/* Auto Temps */
314static ssize_t show_auto_temp_off(struct device *dev, char *buf, int nr)
315{
316 struct adm1031_data *data = adm1031_update_device(dev);
317 return sprintf(buf, "%d\n",
318 AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr]));
319}
320static ssize_t show_auto_temp_min(struct device *dev, char *buf, int nr)
321{
322 struct adm1031_data *data = adm1031_update_device(dev);
323 return sprintf(buf, "%d\n",
324 AUTO_TEMP_MIN_FROM_REG(data->auto_temp[nr]));
325}
326static ssize_t
327set_auto_temp_min(struct device *dev, const char *buf, size_t count, int nr)
328{
329 struct i2c_client *client = to_i2c_client(dev);
330 struct adm1031_data *data = i2c_get_clientdata(client);
331 int val = simple_strtol(buf, NULL, 10);
332
333 down(&data->update_lock);
334 data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]);
335 adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
336 data->auto_temp[nr]);
337 up(&data->update_lock);
338 return count;
339}
340static ssize_t show_auto_temp_max(struct device *dev, char *buf, int nr)
341{
342 struct adm1031_data *data = adm1031_update_device(dev);
343 return sprintf(buf, "%d\n",
344 AUTO_TEMP_MAX_FROM_REG(data->auto_temp[nr]));
345}
346static ssize_t
347set_auto_temp_max(struct device *dev, const char *buf, size_t count, int nr)
348{
349 struct i2c_client *client = to_i2c_client(dev);
350 struct adm1031_data *data = i2c_get_clientdata(client);
351 int val = simple_strtol(buf, NULL, 10);
352
353 down(&data->update_lock);
354 data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]);
355 adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
356 data->temp_max[nr]);
357 up(&data->update_lock);
358 return count;
359}
360
361#define auto_temp_reg(offset) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400362static ssize_t show_auto_temp_##offset##_off (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700363{ \
364 return show_auto_temp_off(dev, buf, offset - 1); \
365} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400366static ssize_t show_auto_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700367{ \
368 return show_auto_temp_min(dev, buf, offset - 1); \
369} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400370static ssize_t show_auto_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700371{ \
372 return show_auto_temp_max(dev, buf, offset - 1); \
373} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400374static ssize_t set_auto_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700375 const char *buf, size_t count) \
376{ \
377 return set_auto_temp_min(dev, buf, count, offset - 1); \
378} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400379static ssize_t set_auto_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700380 const char *buf, size_t count) \
381{ \
382 return set_auto_temp_max(dev, buf, count, offset - 1); \
383} \
384static DEVICE_ATTR(auto_temp##offset##_off, S_IRUGO, \
385 show_auto_temp_##offset##_off, NULL); \
386static DEVICE_ATTR(auto_temp##offset##_min, S_IRUGO | S_IWUSR, \
387 show_auto_temp_##offset##_min, set_auto_temp_##offset##_min);\
388static DEVICE_ATTR(auto_temp##offset##_max, S_IRUGO | S_IWUSR, \
389 show_auto_temp_##offset##_max, set_auto_temp_##offset##_max)
390
391auto_temp_reg(1);
392auto_temp_reg(2);
393auto_temp_reg(3);
394
395/* pwm */
396static ssize_t show_pwm(struct device *dev, char *buf, int nr)
397{
398 struct adm1031_data *data = adm1031_update_device(dev);
399 return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
400}
401static ssize_t
402set_pwm(struct device *dev, const char *buf, size_t count, int nr)
403{
404 struct i2c_client *client = to_i2c_client(dev);
405 struct adm1031_data *data = i2c_get_clientdata(client);
406 int val = simple_strtol(buf, NULL, 10);
407 int reg;
408
409 down(&data->update_lock);
410 if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) &&
411 (((val>>4) & 0xf) != 5)) {
412 /* In automatic mode, the only PWM accepted is 33% */
413 up(&data->update_lock);
414 return -EINVAL;
415 }
416 data->pwm[nr] = PWM_TO_REG(val);
417 reg = adm1031_read_value(client, ADM1031_REG_PWM);
418 adm1031_write_value(client, ADM1031_REG_PWM,
419 nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf)
420 : (data->pwm[nr] & 0xf) | (reg & 0xf0));
421 up(&data->update_lock);
422 return count;
423}
424
425#define pwm_reg(offset) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400426static ssize_t show_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700427{ \
428 return show_pwm(dev, buf, offset - 1); \
429} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400430static ssize_t set_pwm_##offset (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700431 const char *buf, size_t count) \
432{ \
433 return set_pwm(dev, buf, count, offset - 1); \
434} \
435static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
436 show_pwm_##offset, set_pwm_##offset)
437
438pwm_reg(1);
439pwm_reg(2);
440
441/* Fans */
442
443/*
444 * That function checks the cases where the fan reading is not
Steven Cole44bbe872005-05-03 18:21:25 -0600445 * relevant. It is used to provide 0 as fan reading when the fan is
Linus Torvalds1da177e2005-04-16 15:20:36 -0700446 * not supposed to run
447 */
448static int trust_fan_readings(struct adm1031_data *data, int chan)
449{
450 int res = 0;
451
452 if (data->conf1 & ADM1031_CONF1_AUTO_MODE) {
453 switch (data->conf1 & 0x60) {
454 case 0x00: /* remote temp1 controls fan1 remote temp2 controls fan2 */
455 res = data->temp[chan+1] >=
456 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[chan+1]);
457 break;
458 case 0x20: /* remote temp1 controls both fans */
459 res =
460 data->temp[1] >=
461 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]);
462 break;
463 case 0x40: /* remote temp2 controls both fans */
464 res =
465 data->temp[2] >=
466 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]);
467 break;
468 case 0x60: /* max controls both fans */
469 res =
470 data->temp[0] >=
471 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[0])
472 || data->temp[1] >=
473 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1])
474 || (data->chip_type == adm1031
475 && data->temp[2] >=
476 AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]));
477 break;
478 }
479 } else {
480 res = data->pwm[chan] > 0;
481 }
482 return res;
483}
484
485
486static ssize_t show_fan(struct device *dev, char *buf, int nr)
487{
488 struct adm1031_data *data = adm1031_update_device(dev);
489 int value;
490
491 value = trust_fan_readings(data, nr) ? FAN_FROM_REG(data->fan[nr],
492 FAN_DIV_FROM_REG(data->fan_div[nr])) : 0;
493 return sprintf(buf, "%d\n", value);
494}
495
496static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
497{
498 struct adm1031_data *data = adm1031_update_device(dev);
499 return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[nr]));
500}
501static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
502{
503 struct adm1031_data *data = adm1031_update_device(dev);
504 return sprintf(buf, "%d\n",
505 FAN_FROM_REG(data->fan_min[nr],
506 FAN_DIV_FROM_REG(data->fan_div[nr])));
507}
508static ssize_t
509set_fan_min(struct device *dev, const char *buf, size_t count, int nr)
510{
511 struct i2c_client *client = to_i2c_client(dev);
512 struct adm1031_data *data = i2c_get_clientdata(client);
513 int val = simple_strtol(buf, NULL, 10);
514
515 down(&data->update_lock);
516 if (val) {
517 data->fan_min[nr] =
518 FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr]));
519 } else {
520 data->fan_min[nr] = 0xff;
521 }
522 adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]);
523 up(&data->update_lock);
524 return count;
525}
526static ssize_t
527set_fan_div(struct device *dev, const char *buf, size_t count, int nr)
528{
529 struct i2c_client *client = to_i2c_client(dev);
530 struct adm1031_data *data = i2c_get_clientdata(client);
531 int val = simple_strtol(buf, NULL, 10);
532 u8 tmp;
533 int old_div;
534 int new_min;
535
536 tmp = val == 8 ? 0xc0 :
537 val == 4 ? 0x80 :
538 val == 2 ? 0x40 :
539 val == 1 ? 0x00 :
540 0xff;
541 if (tmp == 0xff)
542 return -EINVAL;
543
544 down(&data->update_lock);
545 old_div = FAN_DIV_FROM_REG(data->fan_div[nr]);
546 data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]);
547 new_min = data->fan_min[nr] * old_div /
548 FAN_DIV_FROM_REG(data->fan_div[nr]);
549 data->fan_min[nr] = new_min > 0xff ? 0xff : new_min;
550 data->fan[nr] = data->fan[nr] * old_div /
551 FAN_DIV_FROM_REG(data->fan_div[nr]);
552
553 adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr),
554 data->fan_div[nr]);
555 adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr),
556 data->fan_min[nr]);
557 up(&data->update_lock);
558 return count;
559}
560
561#define fan_offset(offset) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400562static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700563{ \
564 return show_fan(dev, buf, offset - 1); \
565} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400566static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700567{ \
568 return show_fan_min(dev, buf, offset - 1); \
569} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400570static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700571{ \
572 return show_fan_div(dev, buf, offset - 1); \
573} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400574static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700575 const char *buf, size_t count) \
576{ \
577 return set_fan_min(dev, buf, count, offset - 1); \
578} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400579static ssize_t set_fan_##offset##_div (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700580 const char *buf, size_t count) \
581{ \
582 return set_fan_div(dev, buf, count, offset - 1); \
583} \
584static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, \
585 NULL); \
586static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
587 show_fan_##offset##_min, set_fan_##offset##_min); \
588static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
589 show_fan_##offset##_div, set_fan_##offset##_div); \
590static DEVICE_ATTR(auto_fan##offset##_min_pwm, S_IRUGO | S_IWUSR, \
591 show_pwm_##offset, set_pwm_##offset)
592
593fan_offset(1);
594fan_offset(2);
595
596
597/* Temps */
598static ssize_t show_temp(struct device *dev, char *buf, int nr)
599{
600 struct adm1031_data *data = adm1031_update_device(dev);
601 int ext;
602 ext = nr == 0 ?
603 ((data->ext_temp[nr] >> 6) & 0x3) * 2 :
604 (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7));
605 return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext));
606}
607static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
608{
609 struct adm1031_data *data = adm1031_update_device(dev);
610 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
611}
612static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
613{
614 struct adm1031_data *data = adm1031_update_device(dev);
615 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
616}
617static ssize_t show_temp_crit(struct device *dev, char *buf, int nr)
618{
619 struct adm1031_data *data = adm1031_update_device(dev);
620 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
621}
622static ssize_t
623set_temp_min(struct device *dev, const char *buf, size_t count, int nr)
624{
625 struct i2c_client *client = to_i2c_client(dev);
626 struct adm1031_data *data = i2c_get_clientdata(client);
627 int val;
628
629 val = simple_strtol(buf, NULL, 10);
630 val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
631 down(&data->update_lock);
632 data->temp_min[nr] = TEMP_TO_REG(val);
633 adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
634 data->temp_min[nr]);
635 up(&data->update_lock);
636 return count;
637}
638static ssize_t
639set_temp_max(struct device *dev, const char *buf, size_t count, int nr)
640{
641 struct i2c_client *client = to_i2c_client(dev);
642 struct adm1031_data *data = i2c_get_clientdata(client);
643 int val;
644
645 val = simple_strtol(buf, NULL, 10);
646 val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
647 down(&data->update_lock);
648 data->temp_max[nr] = TEMP_TO_REG(val);
649 adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
650 data->temp_max[nr]);
651 up(&data->update_lock);
652 return count;
653}
654static ssize_t
655set_temp_crit(struct device *dev, const char *buf, size_t count, int nr)
656{
657 struct i2c_client *client = to_i2c_client(dev);
658 struct adm1031_data *data = i2c_get_clientdata(client);
659 int val;
660
661 val = simple_strtol(buf, NULL, 10);
662 val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
663 down(&data->update_lock);
664 data->temp_crit[nr] = TEMP_TO_REG(val);
665 adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),
666 data->temp_crit[nr]);
667 up(&data->update_lock);
668 return count;
669}
670
671#define temp_reg(offset) \
Yani Ioannou30f74292005-05-17 06:41:35 -0400672static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700673{ \
674 return show_temp(dev, buf, offset - 1); \
675} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400676static ssize_t show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700677{ \
678 return show_temp_min(dev, buf, offset - 1); \
679} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400680static ssize_t show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700681{ \
682 return show_temp_max(dev, buf, offset - 1); \
683} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400684static ssize_t show_temp_##offset##_crit (struct device *dev, struct device_attribute *attr, char *buf) \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700685{ \
686 return show_temp_crit(dev, buf, offset - 1); \
687} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400688static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700689 const char *buf, size_t count) \
690{ \
691 return set_temp_min(dev, buf, count, offset - 1); \
692} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400693static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700694 const char *buf, size_t count) \
695{ \
696 return set_temp_max(dev, buf, count, offset - 1); \
697} \
Yani Ioannou30f74292005-05-17 06:41:35 -0400698static ssize_t set_temp_##offset##_crit (struct device *dev, struct device_attribute *attr, \
Linus Torvalds1da177e2005-04-16 15:20:36 -0700699 const char *buf, size_t count) \
700{ \
701 return set_temp_crit(dev, buf, count, offset - 1); \
702} \
703static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, \
704 NULL); \
705static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
706 show_temp_##offset##_min, set_temp_##offset##_min); \
707static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
708 show_temp_##offset##_max, set_temp_##offset##_max); \
709static DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR, \
710 show_temp_##offset##_crit, set_temp_##offset##_crit)
711
712temp_reg(1);
713temp_reg(2);
714temp_reg(3);
715
716/* Alarms */
Yani Ioannou30f74292005-05-17 06:41:35 -0400717static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718{
719 struct adm1031_data *data = adm1031_update_device(dev);
720 return sprintf(buf, "%d\n", data->alarm);
721}
722
723static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
724
725
726static int adm1031_attach_adapter(struct i2c_adapter *adapter)
727{
728 if (!(adapter->class & I2C_CLASS_HWMON))
729 return 0;
Jean Delvare2ed2dc32005-07-31 21:42:02 +0200730 return i2c_probe(adapter, &addr_data, adm1031_detect);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700731}
732
Jean Delvare2ed2dc32005-07-31 21:42:02 +0200733/* This function is called by i2c_probe */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700734static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
735{
736 struct i2c_client *new_client;
737 struct adm1031_data *data;
738 int err = 0;
739 const char *name = "";
740
741 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
742 goto exit;
743
744 if (!(data = kmalloc(sizeof(struct adm1031_data), GFP_KERNEL))) {
745 err = -ENOMEM;
746 goto exit;
747 }
748 memset(data, 0, sizeof(struct adm1031_data));
749
750 new_client = &data->client;
751 i2c_set_clientdata(new_client, data);
752 new_client->addr = address;
753 new_client->adapter = adapter;
754 new_client->driver = &adm1031_driver;
755 new_client->flags = 0;
756
757 if (kind < 0) {
758 int id, co;
759 id = i2c_smbus_read_byte_data(new_client, 0x3d);
760 co = i2c_smbus_read_byte_data(new_client, 0x3e);
761
762 if (!((id == 0x31 || id == 0x30) && co == 0x41))
763 goto exit_free;
764 kind = (id == 0x30) ? adm1030 : adm1031;
765 }
766
767 if (kind <= 0)
768 kind = adm1031;
769
770 /* Given the detected chip type, set the chip name and the
771 * auto fan control helper table. */
772 if (kind == adm1030) {
773 name = "adm1030";
774 data->chan_select_table = &auto_channel_select_table_adm1030;
775 } else if (kind == adm1031) {
776 name = "adm1031";
777 data->chan_select_table = &auto_channel_select_table_adm1031;
778 }
779 data->chip_type = kind;
780
781 strlcpy(new_client->name, name, I2C_NAME_SIZE);
782 data->valid = 0;
783 init_MUTEX(&data->update_lock);
784
785 /* Tell the I2C layer a new client has arrived */
786 if ((err = i2c_attach_client(new_client)))
787 goto exit_free;
788
789 /* Initialize the ADM1031 chip */
790 adm1031_init_client(new_client);
791
792 /* Register sysfs hooks */
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400793 data->class_dev = hwmon_device_register(&new_client->dev);
794 if (IS_ERR(data->class_dev)) {
795 err = PTR_ERR(data->class_dev);
796 goto exit_detach;
797 }
798
Linus Torvalds1da177e2005-04-16 15:20:36 -0700799 device_create_file(&new_client->dev, &dev_attr_fan1_input);
800 device_create_file(&new_client->dev, &dev_attr_fan1_div);
801 device_create_file(&new_client->dev, &dev_attr_fan1_min);
802 device_create_file(&new_client->dev, &dev_attr_pwm1);
803 device_create_file(&new_client->dev, &dev_attr_auto_fan1_channel);
804 device_create_file(&new_client->dev, &dev_attr_temp1_input);
805 device_create_file(&new_client->dev, &dev_attr_temp1_min);
806 device_create_file(&new_client->dev, &dev_attr_temp1_max);
807 device_create_file(&new_client->dev, &dev_attr_temp1_crit);
808 device_create_file(&new_client->dev, &dev_attr_temp2_input);
809 device_create_file(&new_client->dev, &dev_attr_temp2_min);
810 device_create_file(&new_client->dev, &dev_attr_temp2_max);
811 device_create_file(&new_client->dev, &dev_attr_temp2_crit);
812
813 device_create_file(&new_client->dev, &dev_attr_auto_temp1_off);
814 device_create_file(&new_client->dev, &dev_attr_auto_temp1_min);
815 device_create_file(&new_client->dev, &dev_attr_auto_temp1_max);
816
817 device_create_file(&new_client->dev, &dev_attr_auto_temp2_off);
818 device_create_file(&new_client->dev, &dev_attr_auto_temp2_min);
819 device_create_file(&new_client->dev, &dev_attr_auto_temp2_max);
820
821 device_create_file(&new_client->dev, &dev_attr_auto_fan1_min_pwm);
822
823 device_create_file(&new_client->dev, &dev_attr_alarms);
824
825 if (kind == adm1031) {
826 device_create_file(&new_client->dev, &dev_attr_fan2_input);
827 device_create_file(&new_client->dev, &dev_attr_fan2_div);
828 device_create_file(&new_client->dev, &dev_attr_fan2_min);
829 device_create_file(&new_client->dev, &dev_attr_pwm2);
830 device_create_file(&new_client->dev,
831 &dev_attr_auto_fan2_channel);
832 device_create_file(&new_client->dev, &dev_attr_temp3_input);
833 device_create_file(&new_client->dev, &dev_attr_temp3_min);
834 device_create_file(&new_client->dev, &dev_attr_temp3_max);
835 device_create_file(&new_client->dev, &dev_attr_temp3_crit);
836 device_create_file(&new_client->dev, &dev_attr_auto_temp3_off);
837 device_create_file(&new_client->dev, &dev_attr_auto_temp3_min);
838 device_create_file(&new_client->dev, &dev_attr_auto_temp3_max);
839 device_create_file(&new_client->dev, &dev_attr_auto_fan2_min_pwm);
840 }
841
842 return 0;
843
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400844exit_detach:
845 i2c_detach_client(new_client);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700846exit_free:
Alexey Dobriyan1f57ff82005-08-26 01:49:14 +0400847 kfree(data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700848exit:
849 return err;
850}
851
852static int adm1031_detach_client(struct i2c_client *client)
853{
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400854 struct adm1031_data *data = i2c_get_clientdata(client);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700855 int ret;
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400856
857 hwmon_device_unregister(data->class_dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700858 if ((ret = i2c_detach_client(client)) != 0) {
859 return ret;
860 }
Mark M. Hoffman943b0832005-07-15 21:39:18 -0400861 kfree(data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700862 return 0;
863}
864
865static void adm1031_init_client(struct i2c_client *client)
866{
867 unsigned int read_val;
868 unsigned int mask;
869 struct adm1031_data *data = i2c_get_clientdata(client);
870
871 mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE);
872 if (data->chip_type == adm1031) {
873 mask |= (ADM1031_CONF2_PWM2_ENABLE |
874 ADM1031_CONF2_TACH2_ENABLE);
875 }
876 /* Initialize the ADM1031 chip (enables fan speed reading ) */
877 read_val = adm1031_read_value(client, ADM1031_REG_CONF2);
878 if ((read_val | mask) != read_val) {
879 adm1031_write_value(client, ADM1031_REG_CONF2, read_val | mask);
880 }
881
882 read_val = adm1031_read_value(client, ADM1031_REG_CONF1);
883 if ((read_val | ADM1031_CONF1_MONITOR_ENABLE) != read_val) {
884 adm1031_write_value(client, ADM1031_REG_CONF1, read_val |
885 ADM1031_CONF1_MONITOR_ENABLE);
886 }
887
888}
889
890static struct adm1031_data *adm1031_update_device(struct device *dev)
891{
892 struct i2c_client *client = to_i2c_client(dev);
893 struct adm1031_data *data = i2c_get_clientdata(client);
894 int chan;
895
896 down(&data->update_lock);
897
898 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
899 || !data->valid) {
900
901 dev_dbg(&client->dev, "Starting adm1031 update\n");
902 for (chan = 0;
903 chan < ((data->chip_type == adm1031) ? 3 : 2); chan++) {
904 u8 oldh, newh;
905
906 oldh =
907 adm1031_read_value(client, ADM1031_REG_TEMP(chan));
908 data->ext_temp[chan] =
909 adm1031_read_value(client, ADM1031_REG_EXT_TEMP);
910 newh =
911 adm1031_read_value(client, ADM1031_REG_TEMP(chan));
912 if (newh != oldh) {
913 data->ext_temp[chan] =
914 adm1031_read_value(client,
915 ADM1031_REG_EXT_TEMP);
916#ifdef DEBUG
917 oldh =
918 adm1031_read_value(client,
919 ADM1031_REG_TEMP(chan));
920
921 /* oldh is actually newer */
922 if (newh != oldh)
923 dev_warn(&client->dev,
924 "Remote temperature may be "
925 "wrong.\n");
926#endif
927 }
928 data->temp[chan] = newh;
929
930 data->temp_min[chan] =
931 adm1031_read_value(client,
932 ADM1031_REG_TEMP_MIN(chan));
933 data->temp_max[chan] =
934 adm1031_read_value(client,
935 ADM1031_REG_TEMP_MAX(chan));
936 data->temp_crit[chan] =
937 adm1031_read_value(client,
938 ADM1031_REG_TEMP_CRIT(chan));
939 data->auto_temp[chan] =
940 adm1031_read_value(client,
941 ADM1031_REG_AUTO_TEMP(chan));
942
943 }
944
945 data->conf1 = adm1031_read_value(client, ADM1031_REG_CONF1);
946 data->conf2 = adm1031_read_value(client, ADM1031_REG_CONF2);
947
948 data->alarm = adm1031_read_value(client, ADM1031_REG_STATUS(0))
949 | (adm1031_read_value(client, ADM1031_REG_STATUS(1))
950 << 8);
951 if (data->chip_type == adm1030) {
952 data->alarm &= 0xc0ff;
953 }
954
955 for (chan=0; chan<(data->chip_type == adm1030 ? 1 : 2); chan++) {
956 data->fan_div[chan] =
957 adm1031_read_value(client, ADM1031_REG_FAN_DIV(chan));
958 data->fan_min[chan] =
959 adm1031_read_value(client, ADM1031_REG_FAN_MIN(chan));
960 data->fan[chan] =
961 adm1031_read_value(client, ADM1031_REG_FAN_SPEED(chan));
962 data->pwm[chan] =
963 0xf & (adm1031_read_value(client, ADM1031_REG_PWM) >>
964 (4*chan));
965 }
966 data->last_updated = jiffies;
967 data->valid = 1;
968 }
969
970 up(&data->update_lock);
971
972 return data;
973}
974
975static int __init sensors_adm1031_init(void)
976{
977 return i2c_add_driver(&adm1031_driver);
978}
979
980static void __exit sensors_adm1031_exit(void)
981{
982 i2c_del_driver(&adm1031_driver);
983}
984
985MODULE_AUTHOR("Alexandre d'Alton <alex@alexdalton.org>");
986MODULE_DESCRIPTION("ADM1031/ADM1030 driver");
987MODULE_LICENSE("GPL");
988
989module_init(sensors_adm1031_init);
990module_exit(sensors_adm1031_exit);