blob: 6851bdb2ce29957b2293e4bb59e7bb1b37e6ae4c [file] [log] [blame]
Ben Hutchings1b1c2e92009-04-29 08:04:46 +00001/*
2 * mdio.c: Generic support for MDIO-compatible transceivers
3 * Copyright 2006-2009 Solarflare Communications Inc.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published
7 * by the Free Software Foundation, incorporated herein by reference.
8 */
9
10#include <linux/kernel.h>
11#include <linux/capability.h>
12#include <linux/errno.h>
13#include <linux/ethtool.h>
14#include <linux/mdio.h>
15#include <linux/module.h>
16
Nicolas Reinecke30767632009-06-25 02:55:31 +000017MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers");
18MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc.");
19MODULE_LICENSE("GPL");
20
Ben Hutchings1b1c2e92009-04-29 08:04:46 +000021/**
22 * mdio45_probe - probe for an MDIO (clause 45) device
23 * @mdio: MDIO interface
24 * @prtad: Expected PHY address
25 *
26 * This sets @prtad and @mmds in the MDIO interface if successful.
27 * Returns 0 on success, negative on error.
28 */
29int mdio45_probe(struct mdio_if_info *mdio, int prtad)
30{
31 int mmd, stat2, devs1, devs2;
32
33 /* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY
34 * XS or DTE XS; give up if none is present. */
35 for (mmd = 1; mmd <= 5; mmd++) {
36 /* Is this MMD present? */
37 stat2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_STAT2);
38 if (stat2 < 0 ||
39 (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL)
40 continue;
41
42 /* It should tell us about all the other MMDs */
43 devs1 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS1);
44 devs2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS2);
45 if (devs1 < 0 || devs2 < 0)
46 continue;
47
48 mdio->prtad = prtad;
49 mdio->mmds = devs1 | (devs2 << 16);
50 return 0;
51 }
52
53 return -ENODEV;
54}
55EXPORT_SYMBOL(mdio45_probe);
56
57/**
58 * mdio_set_flag - set or clear flag in an MDIO register
59 * @mdio: MDIO interface
60 * @prtad: PHY address
61 * @devad: MMD address
62 * @addr: Register address
63 * @mask: Mask for flag (single bit set)
64 * @sense: New value of flag
65 *
66 * This debounces changes: it does not write the register if the flag
67 * already has the proper value. Returns 0 on success, negative on error.
68 */
69int mdio_set_flag(const struct mdio_if_info *mdio,
70 int prtad, int devad, u16 addr, int mask,
71 bool sense)
72{
73 int old_val = mdio->mdio_read(mdio->dev, prtad, devad, addr);
74 int new_val;
75
76 if (old_val < 0)
77 return old_val;
78 if (sense)
79 new_val = old_val | mask;
80 else
81 new_val = old_val & ~mask;
82 if (old_val == new_val)
83 return 0;
84 return mdio->mdio_write(mdio->dev, prtad, devad, addr, new_val);
85}
86EXPORT_SYMBOL(mdio_set_flag);
87
88/**
89 * mdio_link_ok - is link status up/OK
90 * @mdio: MDIO interface
91 * @mmd_mask: Mask for MMDs to check
92 *
93 * Returns 1 if the PHY reports link status up/OK, 0 otherwise.
94 * @mmd_mask is normally @mdio->mmds, but if loopback is enabled
95 * the MMDs being bypassed should be excluded from the mask.
96 */
97int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmd_mask)
98{
99 int devad, reg;
100
101 if (!mmd_mask) {
102 /* Use absence of XGMII faults in lieu of link state */
103 reg = mdio->mdio_read(mdio->dev, mdio->prtad,
104 MDIO_MMD_PHYXS, MDIO_STAT2);
105 return reg >= 0 && !(reg & MDIO_STAT2_RXFAULT);
106 }
107
108 for (devad = 0; mmd_mask; devad++) {
109 if (mmd_mask & (1 << devad)) {
110 mmd_mask &= ~(1 << devad);
111
112 /* Read twice because link state is latched and a
113 * read moves the current state into the register */
114 mdio->mdio_read(mdio->dev, mdio->prtad,
115 devad, MDIO_STAT1);
116 reg = mdio->mdio_read(mdio->dev, mdio->prtad,
117 devad, MDIO_STAT1);
118 if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
119 return false;
120 }
121 }
122
123 return true;
124}
125EXPORT_SYMBOL(mdio45_links_ok);
126
127/**
128 * mdio45_nway_restart - restart auto-negotiation for this interface
129 * @mdio: MDIO interface
130 *
131 * Returns 0 on success, negative on error.
132 */
133int mdio45_nway_restart(const struct mdio_if_info *mdio)
134{
135 if (!(mdio->mmds & MDIO_DEVS_AN))
136 return -EOPNOTSUPP;
137
138 mdio_set_flag(mdio, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1,
139 MDIO_AN_CTRL1_RESTART, true);
140 return 0;
141}
142EXPORT_SYMBOL(mdio45_nway_restart);
143
144static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr)
145{
146 u32 result = 0;
147 int reg;
148
149 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, addr);
150 if (reg & ADVERTISE_10HALF)
151 result |= ADVERTISED_10baseT_Half;
152 if (reg & ADVERTISE_10FULL)
153 result |= ADVERTISED_10baseT_Full;
154 if (reg & ADVERTISE_100HALF)
155 result |= ADVERTISED_100baseT_Half;
156 if (reg & ADVERTISE_100FULL)
157 result |= ADVERTISED_100baseT_Full;
158 return result;
159}
160
161/**
162 * mdio45_ethtool_gset_npage - get settings for ETHTOOL_GSET
163 * @mdio: MDIO interface
164 * @ecmd: Ethtool request structure
165 * @npage_adv: Modes currently advertised on next pages
166 * @npage_lpa: Modes advertised by link partner on next pages
167 *
168 * Since the CSRs for auto-negotiation using next pages are not fully
169 * standardised, this function does not attempt to decode them. The
170 * caller must pass them in.
171 */
172void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
173 struct ethtool_cmd *ecmd,
174 u32 npage_adv, u32 npage_lpa)
175{
176 int reg;
177
178 ecmd->transceiver = XCVR_INTERNAL;
179 ecmd->phy_address = mdio->prtad;
Ben Hutchings0c09c1a2009-04-29 08:21:53 +0000180 ecmd->mdio_support =
181 mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22);
Ben Hutchings1b1c2e92009-04-29 08:04:46 +0000182
183 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
184 MDIO_CTRL2);
185 switch (reg & MDIO_PMA_CTRL2_TYPE) {
186 case MDIO_PMA_CTRL2_10GBT:
187 case MDIO_PMA_CTRL2_1000BT:
188 case MDIO_PMA_CTRL2_100BTX:
189 case MDIO_PMA_CTRL2_10BT:
190 ecmd->port = PORT_TP;
191 ecmd->supported = SUPPORTED_TP;
192 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
193 MDIO_SPEED);
194 if (reg & MDIO_SPEED_10G)
195 ecmd->supported |= SUPPORTED_10000baseT_Full;
196 if (reg & MDIO_PMA_SPEED_1000)
197 ecmd->supported |= (SUPPORTED_1000baseT_Full |
198 SUPPORTED_1000baseT_Half);
199 if (reg & MDIO_PMA_SPEED_100)
200 ecmd->supported |= (SUPPORTED_100baseT_Full |
201 SUPPORTED_100baseT_Half);
202 if (reg & MDIO_PMA_SPEED_10)
203 ecmd->supported |= (SUPPORTED_10baseT_Full |
204 SUPPORTED_10baseT_Half);
205 ecmd->advertising = ADVERTISED_TP;
206 break;
207
208 case MDIO_PMA_CTRL2_10GBCX4:
Ben Hutchings894b19a2009-04-29 08:25:57 +0000209 ecmd->port = PORT_OTHER;
210 ecmd->supported = 0;
211 ecmd->advertising = 0;
212 break;
213
Ben Hutchings1b1c2e92009-04-29 08:04:46 +0000214 case MDIO_PMA_CTRL2_10GBKX4:
215 case MDIO_PMA_CTRL2_10GBKR:
216 case MDIO_PMA_CTRL2_1000BKX:
217 ecmd->port = PORT_OTHER;
Ben Hutchings894b19a2009-04-29 08:25:57 +0000218 ecmd->supported = SUPPORTED_Backplane;
219 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
220 MDIO_PMA_EXTABLE);
221 if (reg & MDIO_PMA_EXTABLE_10GBKX4)
222 ecmd->supported |= SUPPORTED_10000baseKX4_Full;
223 if (reg & MDIO_PMA_EXTABLE_10GBKR)
224 ecmd->supported |= SUPPORTED_10000baseKR_Full;
225 if (reg & MDIO_PMA_EXTABLE_1000BKX)
226 ecmd->supported |= SUPPORTED_1000baseKX_Full;
227 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
228 MDIO_PMA_10GBR_FECABLE);
229 if (reg & MDIO_PMA_10GBR_FECABLE_ABLE)
230 ecmd->supported |= SUPPORTED_10000baseR_FEC;
231 ecmd->advertising = ADVERTISED_Backplane;
Ben Hutchings1b1c2e92009-04-29 08:04:46 +0000232 break;
233
234 /* All the other defined modes are flavours of optical */
235 default:
236 ecmd->port = PORT_FIBRE;
237 ecmd->supported = SUPPORTED_FIBRE;
238 ecmd->advertising = ADVERTISED_FIBRE;
239 break;
240 }
241
242 if (mdio->mmds & MDIO_DEVS_AN) {
243 ecmd->supported |= SUPPORTED_Autoneg;
244 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
245 MDIO_CTRL1);
246 if (reg & MDIO_AN_CTRL1_ENABLE) {
247 ecmd->autoneg = AUTONEG_ENABLE;
248 ecmd->advertising |=
249 ADVERTISED_Autoneg |
250 mdio45_get_an(mdio, MDIO_AN_ADVERTISE) |
251 npage_adv;
252 } else {
253 ecmd->autoneg = AUTONEG_DISABLE;
254 }
255 } else {
256 ecmd->autoneg = AUTONEG_DISABLE;
257 }
258
259 if (ecmd->autoneg) {
260 u32 modes = 0;
Ben Hutchings0c09c1a2009-04-29 08:21:53 +0000261 int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad,
262 MDIO_MMD_AN, MDIO_STAT1);
Ben Hutchings1b1c2e92009-04-29 08:04:46 +0000263
264 /* If AN is complete and successful, report best common
265 * mode, otherwise report best advertised mode. */
Ben Hutchings0c09c1a2009-04-29 08:21:53 +0000266 if (an_stat & MDIO_AN_STAT1_COMPLETE) {
267 ecmd->lp_advertising =
268 mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa;
269 if (an_stat & MDIO_AN_STAT1_LPABLE)
270 ecmd->lp_advertising |= ADVERTISED_Autoneg;
271 modes = ecmd->advertising & ecmd->lp_advertising;
272 }
273 if ((modes & ~ADVERTISED_Autoneg) == 0)
Ben Hutchings1b1c2e92009-04-29 08:04:46 +0000274 modes = ecmd->advertising;
275
Ben Hutchings894b19a2009-04-29 08:25:57 +0000276 if (modes & (ADVERTISED_10000baseT_Full |
277 ADVERTISED_10000baseKX4_Full |
278 ADVERTISED_10000baseKR_Full)) {
Ben Hutchings1b1c2e92009-04-29 08:04:46 +0000279 ecmd->speed = SPEED_10000;
280 ecmd->duplex = DUPLEX_FULL;
281 } else if (modes & (ADVERTISED_1000baseT_Full |
Ben Hutchings894b19a2009-04-29 08:25:57 +0000282 ADVERTISED_1000baseT_Half |
283 ADVERTISED_1000baseKX_Full)) {
Ben Hutchings1b1c2e92009-04-29 08:04:46 +0000284 ecmd->speed = SPEED_1000;
Ben Hutchings894b19a2009-04-29 08:25:57 +0000285 ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half);
Ben Hutchings1b1c2e92009-04-29 08:04:46 +0000286 } else if (modes & (ADVERTISED_100baseT_Full |
287 ADVERTISED_100baseT_Half)) {
288 ecmd->speed = SPEED_100;
289 ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
290 } else {
291 ecmd->speed = SPEED_10;
292 ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
293 }
294 } else {
295 /* Report forced settings */
296 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
297 MDIO_CTRL1);
298 ecmd->speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) *
299 ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
300 ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX ||
301 ecmd->speed == SPEED_10000);
302 }
Ben Hutchingsd005ba62009-06-10 05:28:04 +0000303
304 /* 10GBASE-T MDI/MDI-X */
305 if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) {
306 switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
307 MDIO_PMA_10GBT_SWAPPOL)) {
308 case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
309 ecmd->eth_tp_mdix = ETH_TP_MDI;
310 break;
311 case 0:
312 ecmd->eth_tp_mdix = ETH_TP_MDI_X;
313 break;
314 default:
315 /* It's complicated... */
316 ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
317 break;
318 }
319 }
Ben Hutchings1b1c2e92009-04-29 08:04:46 +0000320}
321EXPORT_SYMBOL(mdio45_ethtool_gset_npage);
322
323/**
Ben Hutchingsaf2a3ea2009-04-29 08:19:36 +0000324 * mdio45_ethtool_spauseparam_an - set auto-negotiated pause parameters
325 * @mdio: MDIO interface
326 * @ecmd: Ethtool request structure
327 *
328 * This function assumes that the PHY has an auto-negotiation MMD. It
329 * will enable and disable advertising of flow control as appropriate.
330 */
331void mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
332 const struct ethtool_pauseparam *ecmd)
333{
334 int adv, old_adv;
335
336 WARN_ON(!(mdio->mmds & MDIO_DEVS_AN));
337
338 old_adv = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
339 MDIO_AN_ADVERTISE);
340 adv = old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
341 if (ecmd->autoneg)
342 adv |= mii_advertise_flowctrl(
343 (ecmd->rx_pause ? FLOW_CTRL_RX : 0) |
344 (ecmd->tx_pause ? FLOW_CTRL_TX : 0));
345 if (adv != old_adv) {
346 mdio->mdio_write(mdio->dev, mdio->prtad, MDIO_MMD_AN,
347 MDIO_AN_ADVERTISE, adv);
348 mdio45_nway_restart(mdio);
349 }
350}
351EXPORT_SYMBOL(mdio45_ethtool_spauseparam_an);
352
353/**
Ben Hutchings1b1c2e92009-04-29 08:04:46 +0000354 * mdio_mii_ioctl - MII ioctl interface for MDIO (clause 22 or 45) PHYs
355 * @mdio: MDIO interface
356 * @mii_data: MII ioctl data structure
357 * @cmd: MII ioctl command
358 *
359 * Returns 0 on success, negative on error.
360 */
361int mdio_mii_ioctl(const struct mdio_if_info *mdio,
362 struct mii_ioctl_data *mii_data, int cmd)
363{
364 int prtad, devad;
365 u16 addr = mii_data->reg_num;
366
367 /* Validate/convert cmd to one of SIOC{G,S}MIIREG */
368 switch (cmd) {
369 case SIOCGMIIPHY:
370 if (mdio->prtad == MDIO_PRTAD_NONE)
371 return -EOPNOTSUPP;
372 mii_data->phy_id = mdio->prtad;
373 cmd = SIOCGMIIREG;
374 break;
375 case SIOCGMIIREG:
376 break;
377 case SIOCSMIIREG:
378 if (!capable(CAP_NET_ADMIN))
379 return -EPERM;
380 break;
381 default:
382 return -EOPNOTSUPP;
383 }
384
385 /* Validate/convert phy_id */
386 if ((mdio->mode_support & MDIO_SUPPORTS_C45) &&
387 mdio_phy_id_is_c45(mii_data->phy_id)) {
388 prtad = mdio_phy_id_prtad(mii_data->phy_id);
389 devad = mdio_phy_id_devad(mii_data->phy_id);
390 } else if ((mdio->mode_support & MDIO_SUPPORTS_C22) &&
391 mii_data->phy_id < 0x20) {
392 prtad = mii_data->phy_id;
393 devad = MDIO_DEVAD_NONE;
394 addr &= 0x1f;
395 } else if ((mdio->mode_support & MDIO_EMULATE_C22) &&
396 mdio->prtad != MDIO_PRTAD_NONE &&
397 mii_data->phy_id == mdio->prtad) {
398 /* Remap commonly-used MII registers. */
399 prtad = mdio->prtad;
400 switch (addr) {
401 case MII_BMCR:
402 case MII_BMSR:
403 case MII_PHYSID1:
404 case MII_PHYSID2:
405 devad = __ffs(mdio->mmds);
406 break;
407 case MII_ADVERTISE:
408 case MII_LPA:
409 if (!(mdio->mmds & MDIO_DEVS_AN))
410 return -EINVAL;
411 devad = MDIO_MMD_AN;
412 if (addr == MII_ADVERTISE)
413 addr = MDIO_AN_ADVERTISE;
414 else
415 addr = MDIO_AN_LPA;
416 break;
417 default:
418 return -EINVAL;
419 }
420 } else {
421 return -EINVAL;
422 }
423
424 if (cmd == SIOCGMIIREG) {
425 int rc = mdio->mdio_read(mdio->dev, prtad, devad, addr);
426 if (rc < 0)
427 return rc;
428 mii_data->val_out = rc;
429 return 0;
430 } else {
431 return mdio->mdio_write(mdio->dev, prtad, devad, addr,
432 mii_data->val_in);
433 }
434}
435EXPORT_SYMBOL(mdio_mii_ioctl);