Yegor Yefremov | c2fc0ad9 | 2016-04-26 15:00:26 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | */ |
| 8 | |
| 9 | /* |
| 10 | * VScom OnRISC |
| 11 | * http://www.vscom.de |
| 12 | */ |
| 13 | |
| 14 | /dts-v1/; |
| 15 | |
| 16 | #include "am335x-baltos.dtsi" |
| 17 | |
| 18 | / { |
| 19 | model = "OnRISC Baltos iR 2110"; |
| 20 | }; |
| 21 | |
| 22 | &am33xx_pinmux { |
| 23 | uart1_pins: pinmux_uart1_pins { |
| 24 | pinctrl-single,pins = < |
| 25 | AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */ |
| 26 | AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */ |
| 27 | AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */ |
| 28 | AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */ |
| 29 | AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ |
| 30 | AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ |
| 31 | AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ |
| 32 | AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ |
| 33 | >; |
| 34 | }; |
| 35 | }; |
| 36 | |
| 37 | &uart1 { |
| 38 | pinctrl-names = "default"; |
| 39 | pinctrl-0 = <&uart1_pins>; |
| 40 | dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; |
| 41 | dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; |
| 42 | dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; |
| 43 | rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; |
| 44 | |
| 45 | status = "okay"; |
| 46 | }; |
| 47 | |
| 48 | &usb0_phy { |
| 49 | status = "okay"; |
| 50 | }; |
| 51 | |
| 52 | &usb0 { |
| 53 | status = "okay"; |
| 54 | dr_mode = "host"; |
| 55 | }; |
| 56 | |
| 57 | &cpsw_emac0 { |
| 58 | phy_id = <&davinci_mdio>, <1>; |
| 59 | phy-mode = "rmii"; |
| 60 | dual_emac_res_vlan = <1>; |
| 61 | }; |
| 62 | |
| 63 | &cpsw_emac1 { |
| 64 | phy_id = <&davinci_mdio>, <7>; |
| 65 | phy-mode = "rgmii-txid"; |
| 66 | dual_emac_res_vlan = <2>; |
| 67 | }; |
| 68 | |
| 69 | &phy_sel { |
| 70 | rmii-clock-ext = <1>; |
| 71 | }; |