blob: 957840cc7b78748f06530d3aafa8dcf13b271001 [file] [log] [blame]
Lokesh Vutla11e21912013-12-19 18:03:38 +05301/*
2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9/* AM437x GP EVM */
10
11/dts-v1/;
12
13#include "am4372.dtsi"
14#include <dt-bindings/pinctrl/am43xx.h>
Sourav Poddarc540b472013-12-19 18:03:39 +053015#include <dt-bindings/pwm/pwm.h>
Sourav Poddar51724db2013-12-19 18:03:41 +053016#include <dt-bindings/gpio/gpio.h>
Lokesh Vutla11e21912013-12-19 18:03:38 +053017
18/ {
19 model = "TI AM437x GP EVM";
20 compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
Sourav Poddarc540b472013-12-19 18:03:39 +053021
Sathya Prakash M R0bacb522014-03-24 16:31:56 +053022 aliases {
23 display0 = &lcd0;
24 };
25
Peter Ujfalusi390810a2015-07-02 17:06:25 +030026 evm_v3_3d: fixedregulator-v3_3d {
Balaji T K506be3f2014-03-03 20:20:18 +053027 compatible = "regulator-fixed";
Peter Ujfalusi390810a2015-07-02 17:06:25 +030028 regulator-name = "evm_v3_3d";
Balaji T K506be3f2014-03-03 20:20:18 +053029 regulator-min-microvolt = <3300000>;
30 regulator-max-microvolt = <3300000>;
31 enable-active-high;
32 };
33
Dave Gerlachb2873bf2014-05-05 14:58:28 -050034 vtt_fixed: fixedregulator-vtt {
35 compatible = "regulator-fixed";
36 regulator-name = "vtt_fixed";
37 regulator-min-microvolt = <1500000>;
38 regulator-max-microvolt = <1500000>;
39 regulator-always-on;
40 regulator-boot-on;
41 enable-active-high;
42 gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
43 };
44
Eyal Reizerb6bbf592015-05-04 15:24:24 +030045 vmmcwl_fixed: fixedregulator-mmcwl {
46 compatible = "regulator-fixed";
47 regulator-name = "vmmcwl_fixed";
48 regulator-min-microvolt = <1800000>;
49 regulator-max-microvolt = <1800000>;
50 gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
51 enable-active-high;
52 };
53
Sourav Poddarc540b472013-12-19 18:03:39 +053054 backlight {
55 compatible = "pwm-backlight";
56 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
57 brightness-levels = <0 51 53 56 62 75 101 152 255>;
58 default-brightness-level = <8>;
59 };
Sourav Poddar51724db2013-12-19 18:03:41 +053060
Javier Martinez Canillas18ad99d2016-08-01 12:46:57 -040061 matrix_keypad: matrix_keypad0 {
Sourav Poddar51724db2013-12-19 18:03:41 +053062 compatible = "gpio-matrix-keypad";
63 debounce-delay-ms = <5>;
64 col-scan-delay-us = <2>;
65
66 row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
67 &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
68 &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
69
70 col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
71 &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
72
73 linux,keymap = <0x00000201 /* P1 */
74 0x00010202 /* P2 */
75 0x01000067 /* UP */
76 0x0101006a /* RIGHT */
77 0x02000069 /* LEFT */
78 0x0201006c>; /* DOWN */
79 };
Sathya Prakash M R0bacb522014-03-24 16:31:56 +053080
81 lcd0: display {
82 compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
83 label = "lcd";
84
Sathya Prakash M R0bacb522014-03-24 16:31:56 +053085 panel-timing {
86 clock-frequency = <33000000>;
87 hactive = <800>;
88 vactive = <480>;
89 hfront-porch = <210>;
90 hback-porch = <16>;
91 hsync-len = <30>;
92 vback-porch = <10>;
93 vfront-porch = <22>;
94 vsync-len = <13>;
95 hsync-active = <0>;
96 vsync-active = <0>;
97 de-active = <1>;
98 pixelclk-active = <1>;
99 };
100
101 port {
102 lcd_in: endpoint {
103 remote-endpoint = <&dpi_out>;
104 };
105 };
106 };
Lad, Prabhakar3aa59202015-03-12 23:38:21 +0000107
108 /* fixed 12MHz oscillator */
109 refclk: oscillator {
110 #clock-cells = <0>;
111 compatible = "fixed-clock";
112 clock-frequency = <12000000>;
113 };
114
Keerthyfff51e72015-08-18 15:11:14 +0530115 /* fixed 32k external oscillator clock */
116 clk_32k_rtc: clk_32k_rtc {
117 #clock-cells = <0>;
118 compatible = "fixed-clock";
119 clock-frequency = <32768>;
120 };
121
Javier Martinez Canillas4e8603e2016-04-01 16:20:21 -0400122 sound0: sound0 {
Peter Ujfalusicf9a4852015-07-02 17:06:28 +0300123 compatible = "simple-audio-card";
124 simple-audio-card,name = "AM437x-GP-EVM";
125 simple-audio-card,widgets =
126 "Headphone", "Headphone Jack",
127 "Line", "Line In";
128 simple-audio-card,routing =
129 "Headphone Jack", "HPLOUT",
130 "Headphone Jack", "HPROUT",
131 "LINE1L", "Line In",
132 "LINE1R", "Line In";
133 simple-audio-card,format = "dsp_b";
134 simple-audio-card,bitclock-master = <&sound0_master>;
135 simple-audio-card,frame-master = <&sound0_master>;
136 simple-audio-card,bitclock-inversion;
137
138 simple-audio-card,cpu {
139 sound-dai = <&mcasp1>;
140 system-clock-frequency = <12000000>;
141 };
142
143 sound0_master: simple-audio-card,codec {
144 sound-dai = <&tlv320aic3106>;
145 system-clock-frequency = <12000000>;
146 };
147 };
Lokesh Vutla11e21912013-12-19 18:03:38 +0530148};
149
150&am43xx_pinmux {
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300151 pinctrl-names = "default", "sleep";
152 pinctrl-0 = <&wlan_pins_default>;
153 pinctrl-1 = <&wlan_pins_sleep>;
154
Lokesh Vutla11e21912013-12-19 18:03:38 +0530155 i2c0_pins: i2c0_pins {
156 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300157 AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
158 AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
Lokesh Vutla11e21912013-12-19 18:03:38 +0530159 >;
160 };
161
162 i2c1_pins: i2c1_pins {
163 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300164 AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
165 AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
Lokesh Vutla11e21912013-12-19 18:03:38 +0530166 >;
167 };
Sourav Poddarc540b472013-12-19 18:03:39 +0530168
Balaji T K506be3f2014-03-03 20:20:18 +0530169 mmc1_pins: pinmux_mmc1_pins {
170 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300171 AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
Balaji T K506be3f2014-03-03 20:20:18 +0530172 >;
173 };
174
Sourav Poddarc540b472013-12-19 18:03:39 +0530175 ecap0_pins: backlight_pins {
176 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300177 AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
Sourav Poddarc540b472013-12-19 18:03:39 +0530178 >;
179 };
Sekhar Nori0ebc1e22014-04-30 15:43:25 +0300180
181 pixcir_ts_pins: pixcir_ts_pins {
182 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300183 AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */
Sekhar Nori0ebc1e22014-04-30 15:43:25 +0300184 >;
185 };
Mugunthan V N7b25bab2014-05-13 14:14:31 +0530186
187 cpsw_default: cpsw_default {
188 pinctrl-single,pins = <
189 /* Slave 1 */
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300190 AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
191 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
192 AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
193 AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
194 AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
195 AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
196 AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
197 AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
198 AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
199 AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
200 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
201 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
Mugunthan V N7b25bab2014-05-13 14:14:31 +0530202 >;
203 };
204
205 cpsw_sleep: cpsw_sleep {
206 pinctrl-single,pins = <
207 /* Slave 1 reset value */
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300208 AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
209 AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
210 AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
211 AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
212 AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
213 AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
214 AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
215 AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
216 AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
217 AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
218 AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
219 AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
Mugunthan V N7b25bab2014-05-13 14:14:31 +0530220 >;
221 };
222
223 davinci_mdio_default: davinci_mdio_default {
224 pinctrl-single,pins = <
225 /* MDIO */
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300226 AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
227 AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
Mugunthan V N7b25bab2014-05-13 14:14:31 +0530228 >;
229 };
230
231 davinci_mdio_sleep: davinci_mdio_sleep {
232 pinctrl-single,pins = <
233 /* MDIO reset value */
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300234 AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
235 AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
Mugunthan V N7b25bab2014-05-13 14:14:31 +0530236 >;
237 };
Pekon Gupta99ffa642014-05-19 14:45:46 +0530238
239 nand_flash_x8: nand_flash_x8 {
240 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300241 AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
242 AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
243 AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
244 AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
245 AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
246 AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
247 AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
248 AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
249 AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
250 AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
251 AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
252 AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
253 AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
254 AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
255 AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
Pekon Gupta99ffa642014-05-19 14:45:46 +0530256 >;
257 };
Sathya Prakash M R0bacb522014-03-24 16:31:56 +0530258
259 dss_pins: dss_pins {
260 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300261 AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
262 AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
263 AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
264 AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
265 AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
266 AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
267 AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
268 AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
269 AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
270 AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
271 AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
272 AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
273 AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
274 AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
275 AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
276 AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
277 AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
278 AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
279 AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
280 AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
281 AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
282 AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
283 AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
284 AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
285 AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
286 AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
287 AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
288 AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
Sathya Prakash M R0bacb522014-03-24 16:31:56 +0530289
290 >;
291 };
292
Peter Ujfalusi593113e2015-07-02 17:06:24 +0300293 display_mux_pins: display_mux_pins {
Sathya Prakash M R0bacb522014-03-24 16:31:56 +0530294 pinctrl-single,pins = <
295 /* GPIO 5_8 to select LCD / HDMI */
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300296 AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
Sathya Prakash M R0bacb522014-03-24 16:31:56 +0530297 >;
298 };
Mugunthan V N4b1ce232014-07-18 11:29:11 +0530299
300 dcan0_default: dcan0_default_pins {
301 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300302 AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
303 AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
Mugunthan V N4b1ce232014-07-18 11:29:11 +0530304 >;
305 };
306
Roger Quadrosf95b1062015-08-18 17:01:57 +0300307 dcan0_sleep: dcan0_sleep_pins {
308 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300309 AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
310 AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
Roger Quadrosf95b1062015-08-18 17:01:57 +0300311 >;
312 };
313
Mugunthan V N4b1ce232014-07-18 11:29:11 +0530314 dcan1_default: dcan1_default_pins {
315 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300316 AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
317 AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
Mugunthan V N4b1ce232014-07-18 11:29:11 +0530318 >;
319 };
Benoit Parrotc788a7f2014-12-18 21:54:14 +0530320
Roger Quadrosf95b1062015-08-18 17:01:57 +0300321 dcan1_sleep: dcan1_sleep_pins {
322 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300323 AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
324 AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
Roger Quadrosf95b1062015-08-18 17:01:57 +0300325 >;
326 };
327
Benoit Parrotc788a7f2014-12-18 21:54:14 +0530328 vpfe0_pins_default: vpfe0_pins_default {
329 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300330 AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
331 AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
332 AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
333 AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
334 AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
335 AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
336 AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
337 AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
338 AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
339 AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
340 AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
341 AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
342 AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
Benoit Parrotc788a7f2014-12-18 21:54:14 +0530343 >;
344 };
345
346 vpfe0_pins_sleep: vpfe0_pins_sleep {
347 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300348 AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
349 AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
350 AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
351 AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
352 AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
353 AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
354 AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
355 AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
356 AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
357 AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
358 AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
359 AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
360 AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
Benoit Parrotc788a7f2014-12-18 21:54:14 +0530361 >;
362 };
363
364 vpfe1_pins_default: vpfe1_pins_default {
365 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300366 AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
367 AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
368 AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
369 AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
370 AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
371 AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
372 AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
373 AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
374 AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
375 AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
376 AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
377 AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
378 AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
Benoit Parrotc788a7f2014-12-18 21:54:14 +0530379 >;
380 };
381
382 vpfe1_pins_sleep: vpfe1_pins_sleep {
383 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300384 AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
385 AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
386 AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
387 AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
388 AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
389 AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
390 AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
391 AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
392 AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
393 AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
394 AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
395 AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
396 AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
Benoit Parrotc788a7f2014-12-18 21:54:14 +0530397 >;
398 };
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300399
400 mmc3_pins_default: pinmux_mmc3_pins_default {
401 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300402 AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
403 AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
404 AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
405 AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
406 AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
407 AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300408 >;
409 };
410
411 mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
412 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300413 AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */
414 AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */
415 AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */
416 AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */
417 AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */
418 AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300419 >;
420 };
421
422 wlan_pins_default: pinmux_wlan_pins_default {
423 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300424 AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
425 AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
426 AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300427 >;
428 };
429
430 wlan_pins_sleep: pinmux_wlan_pins_sleep {
431 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300432 AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
433 AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
434 AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300435 >;
436 };
437
438 uart3_pins: uart3_pins {
439 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300440 AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */
441 AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
442 AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */
443 AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300444 >;
445 };
Peter Ujfalusid3d92af2015-07-02 17:06:27 +0300446
447 mcasp1_pins: mcasp1_pins {
448 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300449 AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
450 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
451 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
452 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
Peter Ujfalusid3d92af2015-07-02 17:06:27 +0300453 >;
454 };
455
456 mcasp1_sleep_pins: mcasp1_sleep_pins {
457 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300458 AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
459 AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
460 AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
461 AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
Peter Ujfalusid3d92af2015-07-02 17:06:27 +0300462 >;
463 };
Roger Quadros50336f52015-08-04 18:34:59 +0300464
465 gpio0_pins: gpio0_pins {
466 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300467 AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
Roger Quadros50336f52015-08-04 18:34:59 +0300468 >;
469 };
Roger Quadroseb157c82015-08-04 18:35:00 +0300470
471 emmc_pins_default: emmc_pins_default {
472 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300473 AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
474 AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
475 AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
476 AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
477 AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
478 AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
479 AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
480 AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
481 AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
482 AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
Roger Quadroseb157c82015-08-04 18:35:00 +0300483 >;
484 };
485
486 emmc_pins_sleep: emmc_pins_sleep {
487 pinctrl-single,pins = <
Javier Martinez Canillas596bad72015-11-13 01:53:54 -0300488 AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
489 AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
490 AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
491 AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
492 AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
493 AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
494 AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
495 AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
496 AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
497 AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
Roger Quadroseb157c82015-08-04 18:35:00 +0300498 >;
499 };
Lokesh Vutla11e21912013-12-19 18:03:38 +0530500};
501
502&i2c0 {
Keerthy1fc98142014-07-09 11:06:31 +0530503 status = "okay";
504 pinctrl-names = "default";
505 pinctrl-0 = <&i2c0_pins>;
Nishanth Menon93166412014-09-03 13:46:21 -0500506 clock-frequency = <100000>;
Keerthy0e2da5e2014-07-09 11:06:32 +0530507
508 tps65218: tps65218@24 {
509 reg = <0x24>;
510 compatible = "ti,tps65218";
511 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
Keerthy0e2da5e2014-07-09 11:06:32 +0530512 interrupt-controller;
513 #interrupt-cells = <2>;
514
515 dcdc1: regulator-dcdc1 {
Keerthy0e2da5e2014-07-09 11:06:32 +0530516 regulator-name = "vdd_core";
517 regulator-min-microvolt = <912000>;
518 regulator-max-microvolt = <1144000>;
519 regulator-boot-on;
520 regulator-always-on;
521 };
522
523 dcdc2: regulator-dcdc2 {
Keerthy0e2da5e2014-07-09 11:06:32 +0530524 regulator-name = "vdd_mpu";
525 regulator-min-microvolt = <912000>;
526 regulator-max-microvolt = <1378000>;
527 regulator-boot-on;
528 regulator-always-on;
529 };
530
531 dcdc3: regulator-dcdc3 {
Keerthy0e2da5e2014-07-09 11:06:32 +0530532 regulator-name = "vdcdc3";
Keerthy3015ddb2014-11-06 16:20:03 +0530533 regulator-min-microvolt = <1500000>;
534 regulator-max-microvolt = <1500000>;
Keerthy0e2da5e2014-07-09 11:06:32 +0530535 regulator-boot-on;
536 regulator-always-on;
Keerthy1bc5e132016-08-11 10:57:48 +0530537 regulator-state-mem {
538 regulator-on-in-suspend;
539 };
Tero Kristo7ec32992016-08-11 10:57:49 +0530540 regulator-state-disk {
541 regulator-off-in-suspend;
542 };
Keerthy0e2da5e2014-07-09 11:06:32 +0530543 };
Keerthy1bc5e132016-08-11 10:57:48 +0530544
Keerthy0e2da5e2014-07-09 11:06:32 +0530545 dcdc5: regulator-dcdc5 {
Keerthy0e2da5e2014-07-09 11:06:32 +0530546 regulator-name = "v1_0bat";
547 regulator-min-microvolt = <1000000>;
548 regulator-max-microvolt = <1000000>;
Dave Gerlach1e9f7472015-08-05 16:19:46 +0530549 regulator-boot-on;
550 regulator-always-on;
Keerthy1bc5e132016-08-11 10:57:48 +0530551 regulator-state-mem {
552 regulator-on-in-suspend;
553 };
Keerthy0e2da5e2014-07-09 11:06:32 +0530554 };
555
556 dcdc6: regulator-dcdc6 {
Keerthy0e2da5e2014-07-09 11:06:32 +0530557 regulator-name = "v1_8bat";
558 regulator-min-microvolt = <1800000>;
559 regulator-max-microvolt = <1800000>;
Dave Gerlach1e9f7472015-08-05 16:19:46 +0530560 regulator-boot-on;
561 regulator-always-on;
Keerthy1bc5e132016-08-11 10:57:48 +0530562 regulator-state-mem {
563 regulator-on-in-suspend;
564 };
Keerthy0e2da5e2014-07-09 11:06:32 +0530565 };
566
567 ldo1: regulator-ldo1 {
Keerthy0e2da5e2014-07-09 11:06:32 +0530568 regulator-min-microvolt = <1800000>;
569 regulator-max-microvolt = <1800000>;
570 regulator-boot-on;
571 regulator-always-on;
572 };
573 };
Lad, Prabhakar3aa59202015-03-12 23:38:21 +0000574
575 ov2659@30 {
576 compatible = "ovti,ov2659";
577 reg = <0x30>;
578
579 clocks = <&refclk 0>;
580 clock-names = "xvclk";
581
582 port {
583 ov2659_0: endpoint {
584 remote-endpoint = <&vpfe1_ep>;
585 link-frequencies = /bits/ 64 <70000000>;
586 };
587 };
588 };
Lokesh Vutla11e21912013-12-19 18:03:38 +0530589};
590
591&i2c1 {
Keerthy1fc98142014-07-09 11:06:31 +0530592 status = "okay";
593 pinctrl-names = "default";
594 pinctrl-0 = <&i2c1_pins>;
Sekhar Nori0ebc1e22014-04-30 15:43:25 +0300595 pixcir_ts@5c {
596 compatible = "pixcir,pixcir_tangoc";
597 pinctrl-names = "default";
598 pinctrl-0 = <&pixcir_ts_pins>;
599 reg = <0x5c>;
Sekhar Nori0ebc1e22014-04-30 15:43:25 +0300600
601 attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
602
Vignesh Rf513d222015-10-14 19:24:25 +0530603 /*
604 * 0x264 represents the offset of padconf register of
605 * gpio3_22 from am43xx_pinmux base.
606 */
Grygorii Strashko95e7d032015-12-28 15:52:39 +0200607 interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
Vignesh Rf513d222015-10-14 19:24:25 +0530608 <&am43xx_pinmux 0x264>;
609 interrupt-names = "tsc", "wakeup";
610
Roger Quadrosf0486152014-07-28 10:11:37 -0700611 touchscreen-size-x = <1024>;
612 touchscreen-size-y = <600>;
Vignesh Rf513d222015-10-14 19:24:25 +0530613 wakeup-source;
Sekhar Nori0ebc1e22014-04-30 15:43:25 +0300614 };
Lad, Prabhakar3aa59202015-03-12 23:38:21 +0000615
616 ov2659@30 {
617 compatible = "ovti,ov2659";
618 reg = <0x30>;
619
620 clocks = <&refclk 0>;
621 clock-names = "xvclk";
622
623 port {
624 ov2659_1: endpoint {
625 remote-endpoint = <&vpfe0_ep>;
626 link-frequencies = /bits/ 64 <70000000>;
627 };
628 };
629 };
Peter Ujfalusi6076b152015-07-02 17:06:26 +0300630
631 tlv320aic3106: tlv320aic3106@1b {
Peter Ujfalusicf9a4852015-07-02 17:06:28 +0300632 #sound-dai-cells = <0>;
Peter Ujfalusi6076b152015-07-02 17:06:26 +0300633 compatible = "ti,tlv320aic3106";
634 reg = <0x1b>;
635 status = "okay";
636
637 /* Regulators */
638 IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
639 AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
640 DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
641 DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
642 };
Lokesh Vutla11e21912013-12-19 18:03:38 +0530643};
Sourav Poddarc540b472013-12-19 18:03:39 +0530644
645&epwmss0 {
646 status = "okay";
647};
648
Vignesh R0f39f7b2014-11-21 15:44:22 +0530649&tscadc {
650 status = "okay";
651
652 adc {
653 ti,adc-channels = <0 1 2 3 4 5 6 7>;
654 };
655};
656
Sourav Poddarc540b472013-12-19 18:03:39 +0530657&ecap0 {
658 status = "okay";
659 pinctrl-names = "default";
660 pinctrl-0 = <&ecap0_pins>;
661};
Sourav Poddard3d46cc2013-12-19 18:03:40 +0530662
Balaji T K506be3f2014-03-03 20:20:18 +0530663&gpio0 {
Roger Quadros50336f52015-08-04 18:34:59 +0300664 pinctrl-names = "default";
665 pinctrl-0 = <&gpio0_pins>;
Balaji T K506be3f2014-03-03 20:20:18 +0530666 status = "okay";
Roger Quadros50336f52015-08-04 18:34:59 +0300667
668 p23 {
669 gpio-hog;
670 gpios = <23 GPIO_ACTIVE_HIGH>;
671 /* SelEMMCorNAND selects between eMMC and NAND:
672 * Low: NAND
673 * High: eMMC
674 * When changing this line make sure the newly
675 * selected device node is enabled and the previously
676 * selected device node is disabled.
677 */
678 output-low;
679 line-name = "SelEMMCorNAND";
680 };
Balaji T K506be3f2014-03-03 20:20:18 +0530681};
682
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300683&gpio1 {
684 status = "okay";
685};
686
Sourav Poddard3d46cc2013-12-19 18:03:40 +0530687&gpio3 {
688 status = "okay";
689};
690
691&gpio4 {
692 status = "okay";
693};
Balaji T K506be3f2014-03-03 20:20:18 +0530694
Dave Gerlach1ff3859e2014-03-21 10:50:13 +0530695&gpio5 {
Peter Ujfalusi593113e2015-07-02 17:06:24 +0300696 pinctrl-names = "default";
697 pinctrl-0 = <&display_mux_pins>;
Dave Gerlach1ff3859e2014-03-21 10:50:13 +0530698 status = "okay";
699 ti,no-reset-on-init;
Peter Ujfalusi593113e2015-07-02 17:06:24 +0300700
701 p8 {
702 /*
703 * SelLCDorHDMI selects between display and audio paths:
704 * Low: HDMI display with audio via HDMI
705 * High: LCD display with analog audio via aic3111 codec
706 */
707 gpio-hog;
708 gpios = <8 GPIO_ACTIVE_HIGH>;
709 output-high;
710 line-name = "SelLCDorHDMI";
711 };
Dave Gerlach1ff3859e2014-03-21 10:50:13 +0530712};
713
Balaji T K506be3f2014-03-03 20:20:18 +0530714&mmc1 {
715 status = "okay";
Peter Ujfalusi390810a2015-07-02 17:06:25 +0300716 vmmc-supply = <&evm_v3_3d>;
Balaji T K506be3f2014-03-03 20:20:18 +0530717 bus-width = <4>;
718 pinctrl-names = "default";
719 pinctrl-0 = <&mmc1_pins>;
Mugunthan V N0731cbd2015-10-12 14:37:11 +0530720 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
Balaji T K506be3f2014-03-03 20:20:18 +0530721};
George Cherianb5820d32014-03-19 15:40:02 +0530722
Roger Quadroseb157c82015-08-04 18:35:00 +0300723/* eMMC sits on mmc2 */
724&mmc2 {
725 /*
726 * When enabling eMMC, disable GPMC/NAND and set
727 * SelEMMCorNAND to output-high
728 */
729 status = "disabled";
730 vmmc-supply = <&evm_v3_3d>;
731 bus-width = <8>;
732 pinctrl-names = "default", "sleep";
733 pinctrl-0 = <&emmc_pins_default>;
734 pinctrl-1 = <&emmc_pins_sleep>;
735 ti,non-removable;
736};
737
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300738&mmc3 {
739 status = "okay";
740 /* these are on the crossbar and are outlined in the
741 xbar-event-map element */
Peter Ujfalusicce1ee02015-12-17 15:33:37 +0200742 dmas = <&edma_xbar 30 0 1>,
743 <&edma_xbar 31 0 2>;
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300744 dma-names = "tx", "rx";
745 vmmc-supply = <&vmmcwl_fixed>;
746 bus-width = <4>;
747 pinctrl-names = "default", "sleep";
748 pinctrl-0 = <&mmc3_pins_default>;
749 pinctrl-1 = <&mmc3_pins_sleep>;
750 cap-power-off-card;
751 keep-power-in-suspend;
752 ti,non-removable;
753
754 #address-cells = <1>;
755 #size-cells = <0>;
756 wlcore: wlcore@0 {
757 compatible = "ti,wl1835";
758 reg = <2>;
759 interrupt-parent = <&gpio1>;
760 interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
761 };
762};
763
Eyal Reizerb6bbf592015-05-04 15:24:24 +0300764&uart3 {
765 status = "okay";
766 pinctrl-names = "default";
767 pinctrl-0 = <&uart3_pins>;
768};
769
George Cherianb5820d32014-03-19 15:40:02 +0530770&usb2_phy1 {
771 status = "okay";
772};
773
774&usb1 {
775 dr_mode = "peripheral";
776 status = "okay";
777};
778
779&usb2_phy2 {
780 status = "okay";
781};
782
783&usb2 {
784 dr_mode = "host";
785 status = "okay";
786};
Mugunthan V N7b25bab2014-05-13 14:14:31 +0530787
788&mac {
789 slaves = <1>;
790 pinctrl-names = "default", "sleep";
791 pinctrl-0 = <&cpsw_default>;
792 pinctrl-1 = <&cpsw_sleep>;
793 status = "okay";
794};
795
796&davinci_mdio {
797 pinctrl-names = "default", "sleep";
798 pinctrl-0 = <&davinci_mdio_default>;
799 pinctrl-1 = <&davinci_mdio_sleep>;
800 status = "okay";
801};
802
803&cpsw_emac0 {
804 phy_id = <&davinci_mdio>, <0>;
805 phy-mode = "rgmii";
806};
Pekon Gupta99ffa642014-05-19 14:45:46 +0530807
808&elm {
809 status = "okay";
810};
811
812&gpmc {
Roger Quadroseb157c82015-08-04 18:35:00 +0300813 /*
814 * When enabling GPMC, disable eMMC and set
815 * SelEMMCorNAND to output-low
816 */
Pekon Gupta99ffa642014-05-19 14:45:46 +0530817 status = "okay";
818 pinctrl-names = "default";
819 pinctrl-0 = <&nand_flash_x8>;
Roger Quadrosbe3f39c2016-02-23 18:37:19 +0200820 ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
Pekon Gupta99ffa642014-05-19 14:45:46 +0530821 nand@0,0 {
Roger Quadrosbe3f39c2016-02-23 18:37:19 +0200822 compatible = "ti,omap2-nand";
Pekon Gupta99ffa642014-05-19 14:45:46 +0530823 reg = <0 0 4>; /* device IO registers */
Roger Quadrosbe3f39c2016-02-23 18:37:19 +0200824 interrupt-parent = <&gpmc>;
825 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
826 <1 IRQ_TYPE_NONE>; /* termcount */
Roger Quadros99a41012016-04-07 13:25:38 +0300827 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
Roger Quadros6b869112014-09-02 16:57:03 +0300828 ti,nand-ecc-opt = "bch16";
Pekon Gupta99ffa642014-05-19 14:45:46 +0530829 ti,elm-id = <&elm>;
830 nand-bus-width = <8>;
831 gpmc,device-width = <1>;
832 gpmc,sync-clk-ps = <0>;
833 gpmc,cs-on-ns = <0>;
834 gpmc,cs-rd-off-ns = <40>;
835 gpmc,cs-wr-off-ns = <40>;
836 gpmc,adv-on-ns = <0>;
837 gpmc,adv-rd-off-ns = <25>;
838 gpmc,adv-wr-off-ns = <25>;
839 gpmc,we-on-ns = <0>;
840 gpmc,we-off-ns = <20>;
841 gpmc,oe-on-ns = <3>;
842 gpmc,oe-off-ns = <30>;
843 gpmc,access-ns = <30>;
844 gpmc,rd-cycle-ns = <40>;
845 gpmc,wr-cycle-ns = <40>;
Pekon Gupta99ffa642014-05-19 14:45:46 +0530846 gpmc,bus-turnaround-ns = <0>;
847 gpmc,cycle2cycle-delay-ns = <0>;
848 gpmc,clk-activation-ns = <0>;
Pekon Gupta99ffa642014-05-19 14:45:46 +0530849 gpmc,wr-access-ns = <40>;
850 gpmc,wr-data-mux-bus-ns = <0>;
851 /* MTD partition table */
852 /* All SPL-* partitions are sized to minimal length
853 * which can be independently programmable. For
854 * NAND flash this is equal to size of erase-block */
855 #address-cells = <1>;
856 #size-cells = <1>;
857 partition@0 {
858 label = "NAND.SPL";
859 reg = <0x00000000 0x00040000>;
860 };
861 partition@1 {
862 label = "NAND.SPL.backup1";
863 reg = <0x00040000 0x00040000>;
864 };
865 partition@2 {
866 label = "NAND.SPL.backup2";
867 reg = <0x00080000 0x00040000>;
868 };
869 partition@3 {
870 label = "NAND.SPL.backup3";
871 reg = <0x000c0000 0x00040000>;
872 };
873 partition@4 {
874 label = "NAND.u-boot-spl-os";
875 reg = <0x00100000 0x00080000>;
876 };
877 partition@5 {
878 label = "NAND.u-boot";
879 reg = <0x00180000 0x00100000>;
880 };
881 partition@6 {
882 label = "NAND.u-boot-env";
883 reg = <0x00280000 0x00040000>;
884 };
885 partition@7 {
886 label = "NAND.u-boot-env.backup1";
887 reg = <0x002c0000 0x00040000>;
888 };
889 partition@8 {
890 label = "NAND.kernel";
891 reg = <0x00300000 0x00700000>;
892 };
893 partition@9 {
894 label = "NAND.file-system";
895 reg = <0x00a00000 0x1f600000>;
896 };
897 };
898};
Sathya Prakash M R0bacb522014-03-24 16:31:56 +0530899
900&dss {
901 status = "ok";
902
903 pinctrl-names = "default";
904 pinctrl-0 = <&dss_pins>;
905
906 port {
Javier Martinez Canillas7d304f72016-06-27 15:21:04 -0400907 dpi_out: endpoint {
Sathya Prakash M R0bacb522014-03-24 16:31:56 +0530908 remote-endpoint = <&lcd_in>;
909 data-lines = <24>;
910 };
911 };
912};
Mugunthan V N4b1ce232014-07-18 11:29:11 +0530913
914&dcan0 {
Roger Quadrosf95b1062015-08-18 17:01:57 +0300915 pinctrl-names = "default", "sleep";
Mugunthan V N4b1ce232014-07-18 11:29:11 +0530916 pinctrl-0 = <&dcan0_default>;
Roger Quadrosf95b1062015-08-18 17:01:57 +0300917 pinctrl-1 = <&dcan0_sleep>;
Mugunthan V N4b1ce232014-07-18 11:29:11 +0530918 status = "okay";
919};
920
921&dcan1 {
Roger Quadrosf95b1062015-08-18 17:01:57 +0300922 pinctrl-names = "default", "sleep";
Mugunthan V N4b1ce232014-07-18 11:29:11 +0530923 pinctrl-0 = <&dcan1_default>;
Roger Quadrosf95b1062015-08-18 17:01:57 +0300924 pinctrl-1 = <&dcan1_sleep>;
Mugunthan V N4b1ce232014-07-18 11:29:11 +0530925 status = "okay";
926};
Benoit Parrotc788a7f2014-12-18 21:54:14 +0530927
928&vpfe0 {
929 status = "okay";
930 pinctrl-names = "default", "sleep";
931 pinctrl-0 = <&vpfe0_pins_default>;
932 pinctrl-1 = <&vpfe0_pins_sleep>;
933
934 port {
935 vpfe0_ep: endpoint {
Lad, Prabhakar3aa59202015-03-12 23:38:21 +0000936 remote-endpoint = <&ov2659_1>;
Benoit Parrotc788a7f2014-12-18 21:54:14 +0530937 ti,am437x-vpfe-interface = <0>;
938 bus-width = <8>;
939 hsync-active = <0>;
940 vsync-active = <0>;
941 };
942 };
943};
944
945&vpfe1 {
946 status = "okay";
947 pinctrl-names = "default", "sleep";
948 pinctrl-0 = <&vpfe1_pins_default>;
949 pinctrl-1 = <&vpfe1_pins_sleep>;
950
951 port {
952 vpfe1_ep: endpoint {
Lad, Prabhakar3aa59202015-03-12 23:38:21 +0000953 remote-endpoint = <&ov2659_0>;
Benoit Parrotc788a7f2014-12-18 21:54:14 +0530954 ti,am437x-vpfe-interface = <0>;
955 bus-width = <8>;
956 hsync-active = <0>;
957 vsync-active = <0>;
958 };
959 };
960};
Peter Ujfalusid3d92af2015-07-02 17:06:27 +0300961
962&mcasp1 {
Peter Ujfalusicf9a4852015-07-02 17:06:28 +0300963 #sound-dai-cells = <0>;
Peter Ujfalusid3d92af2015-07-02 17:06:27 +0300964 pinctrl-names = "default", "sleep";
965 pinctrl-0 = <&mcasp1_pins>;
966 pinctrl-1 = <&mcasp1_sleep_pins>;
967
968 status = "okay";
969
970 op-mode = <0>; /* MCASP_IIS_MODE */
971 tdm-slots = <2>;
972 /* 4 serializers */
973 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
974 0 0 1 2
975 >;
976 tx-num-evt = <32>;
977 rx-num-evt = <32>;
978};
Keerthyfff51e72015-08-18 15:11:14 +0530979
980&rtc {
981 clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
982 clock-names = "ext-clk", "int-clk";
983 status = "okay";
984};
Dave Gerlach2af84bd2016-05-18 18:36:30 -0500985
986&cpu {
987 cpu0-supply = <&dcdc2>;
988};