blob: f7995c513b678b90d189b0ca4fb0a9b9b5442c26 [file] [log] [blame]
Sergio Pradob18f9092016-04-26 20:38:22 -03001/*
2 * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * version 2 as published by the Free Software Foundation.
12 *
13 * This file is distributed in the hope that it will be useful
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * Or, alternatively
19 *
20 * b) Permission is hereby granted, free of charge, to any person
21 * obtaining a copy of this software and associated documentation
22 * files (the "Software"), to deal in the Software without
23 * restriction, including without limitation the rights to use
24 * copy, modify, merge, publish, distribute, sublicense, and/or
25 * sell copies of the Software, and to permit persons to whom the
26 * Software is furnished to do so, subject to the following
27 * conditions:
28 *
29 * The above copyright notice and this permission notice shall be
30 * included in all copies or substantial portions of the Software.
31 *
32 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
39 * OTHER DEALINGS IN THE SOFTWARE.
40 */
41
42/dts-v1/;
43#include "imx6q.dtsi"
44#include <dt-bindings/gpio/gpio.h>
45
46/ {
47 model = "Embest MarS Board i.MX6Dual";
48 compatible = "embest,imx6q-marsboard", "fsl,imx6q";
49
50 memory {
51 reg = <0x10000000 0x40000000>;
52 };
53
54 reg_3p3v: regulator-3p3v {
55 compatible = "regulator-fixed";
56 regulator-name = "3P3V";
57 regulator-min-microvolt = <3300000>;
58 regulator-max-microvolt = <3300000>;
59 };
60
61 reg_usb_otg_vbus: regulator-usb-otg-vbus {
62 compatible = "regulator-fixed";
63 regulator-name = "usb_otg_vbus";
64 regulator-min-microvolt = <5000000>;
65 regulator-max-microvolt = <5000000>;
66 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
67 enable-active-high;
68 };
69
70 leds {
71 compatible = "gpio-leds";
72 pinctrl-names = "default";
73 pinctrl-0 = <&pinctrl_led>;
74
75 user1 {
76 label = "imx6:green:user1";
77 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
78 default-state = "off";
79 linux,default-trigger = "heartbeat";
80 };
81
82 user2 {
83 label = "imx6:green:user2";
84 gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
85 default-state = "off";
86 };
87 };
88};
89
90&audmux {
91 pinctrl-names = "default";
92 pinctrl-0 = <&pinctrl_audmux>;
93 status = "okay";
94};
95
96&ecspi1 {
97 pinctrl-names = "default";
98 pinctrl-0 = <&pinctrl_ecspi1>;
99 cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
100 fsl,spi-num-chipselects = <1>;
101 status = "okay";
102
103 m25p80@0 {
104 compatible = "microchip,sst25vf016b";
105 spi-max-frequency = <20000000>;
106 reg = <0>;
107 };
108};
109
110&fec {
111 pinctrl-names = "default";
112 pinctrl-0 = <&pinctrl_enet>;
113 phy-mode = "rgmii";
114 phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
115 status = "okay";
116};
117
118&hdmi {
119 ddc-i2c-bus = <&i2c2>;
120 status = "okay";
121};
122
123&i2c1 {
124 clock-frequency = <100000>;
125 pinctrl-names = "default";
126 pinctrl-0 = <&pinctrl_i2c1>;
127 status = "okay";
128};
129
130&i2c2 {
131 clock-frequency = <100000>;
132 pinctrl-names = "default";
133 pinctrl-0 = <&pinctrl_i2c2>;
134 status = "okay";
135};
136
137&i2c3 {
138 clock-frequency = <100000>;
139 pinctrl-names = "default";
140 pinctrl-0 = <&pinctrl_i2c3>;
141 status = "okay";
142};
143
144&pwm1 {
145 pinctrl-names = "default";
146 pinctrl-0 = <&pinctrl_pwm1>;
147 status = "okay";
148};
149
150&pwm2 {
151 pinctrl-names = "default";
152 pinctrl-0 = <&pinctrl_pwm2>;
153 status = "okay";
154};
155
156&pwm3 {
157 pinctrl-names = "default";
158 pinctrl-0 = <&pinctrl_pwm3>;
159 status = "okay";
160};
161
162&pwm4 {
163 pinctrl-names = "default";
164 pinctrl-0 = <&pinctrl_pwm4>;
165 status = "okay";
166};
167
168&uart1 {
169 pinctrl-names = "default";
170 pinctrl-0 = <&pinctrl_uart1>;
171 status = "okay";
172};
173
174&uart2 {
175 pinctrl-names = "default";
176 pinctrl-0 = <&pinctrl_uart2>;
177 status = "okay";
178};
179
180&uart3 {
181 pinctrl-names = "default";
182 pinctrl-0 = <&pinctrl_uart3>;
183 status = "okay";
184};
185
186&uart4 {
187 pinctrl-names = "default";
188 pinctrl-0 = <&pinctrl_uart4>;
189 status = "okay";
190};
191
192&uart5 {
193 pinctrl-names = "default";
194 pinctrl-0 = <&pinctrl_uart5>;
195 status = "okay";
196};
197
198&usbh1 {
199 dr_mode = "host";
200 disable-over-current;
201 status = "okay";
202};
203
204&usbotg {
205 vbus-supply = <&reg_usb_otg_vbus>;
206 pinctrl-names = "default";
207 pinctrl-0 = <&pinctrl_usbotg>;
208 dr_mode = "otg";
209 disable-over-current;
210 status = "okay";
211};
212
213&usdhc2 {
214 pinctrl-names = "default";
215 pinctrl-0 = <&pinctrl_usdhc2>;
216 vmmc-supply = <&reg_3p3v>;
217 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
218 wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
219 status = "okay";
220};
221
222&usdhc3 {
223 pinctrl-names = "default";
224 pinctrl-0 = <&pinctrl_usdhc3>;
225 vmmc-supply = <&reg_3p3v>;
226 non-removable;
227 status = "okay";
228};
229
230&iomuxc {
231
232 pinctrl_audmux: audmuxgrp {
233 fsl,pins = <
234 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
235 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
236 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
237 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
238 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */
239 >;
240 };
241
242 pinctrl_ecspi1: ecspi1grp {
243 fsl,pins = <
244 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
245 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
246 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
247 MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x000b1 /* CS0 */
248 >;
249 };
250
251 pinctrl_enet: enetgrp {
252 fsl,pins = <
253 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
254 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
Uwe Kleine-Königc007b3a2016-07-08 23:22:54 +0200255 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
256 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
257 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
258 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
259 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
260 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
Sergio Pradob18f9092016-04-26 20:38:22 -0300261 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
262 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
263 /* AR8035 pin strapping: IO voltage: pull up */
Uwe Kleine-Königc007b3a2016-07-08 23:22:54 +0200264 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
Sergio Pradob18f9092016-04-26 20:38:22 -0300265 /* AR8035 pin strapping: PHYADDR#0: pull down */
Uwe Kleine-Königc007b3a2016-07-08 23:22:54 +0200266 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
Sergio Pradob18f9092016-04-26 20:38:22 -0300267 /* AR8035 pin strapping: PHYADDR#1: pull down */
Uwe Kleine-Königc007b3a2016-07-08 23:22:54 +0200268 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
Sergio Pradob18f9092016-04-26 20:38:22 -0300269 /* AR8035 pin strapping: MODE#1: pull up */
Uwe Kleine-Königc007b3a2016-07-08 23:22:54 +0200270 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
Sergio Pradob18f9092016-04-26 20:38:22 -0300271 /* AR8035 pin strapping: MODE#3: pull up */
Uwe Kleine-Königc007b3a2016-07-08 23:22:54 +0200272 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
Sergio Pradob18f9092016-04-26 20:38:22 -0300273 /* AR8035 pin strapping: MODE#0: pull down */
Uwe Kleine-Königc007b3a2016-07-08 23:22:54 +0200274 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
Sergio Pradob18f9092016-04-26 20:38:22 -0300275 /* GPIO16 -> AR8035 25MHz */
276 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
277 /* RGMII_nRST */
278 MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0
279 /* AR8035 interrupt */
280 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0
281 >;
282 };
283
284 pinctrl_i2c1: i2c1grp {
285 fsl,pins = <
286 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
287 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
288 >;
289 };
290
291 pinctrl_i2c2: i2c2grp {
292 fsl,pins = <
293 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
294 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
295 >;
296 };
297
298 pinctrl_i2c3: i2c3grp {
299 fsl,pins = <
300 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
301 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
302 >;
303 };
304
305 pinctrl_led: ledgrp {
306 fsl,pins = <
307 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* LED1 */
308 MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* LED2 */
309 >;
310 };
311
312 pinctrl_pwm1: pwm1grp {
313 fsl,pins = <
314 MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
315 >;
316 };
317
318 pinctrl_pwm2: pwm2grp {
319 fsl,pins = <
320 MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
321 >;
322 };
323
324 pinctrl_pwm3: pwm3grp {
325 fsl,pins = <
326 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
327 >;
328 };
329
330 pinctrl_pwm4: pwm4grp {
331 fsl,pins = <
332 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
333 >;
334 };
335
336 pinctrl_uart1: uart1grp {
337 fsl,pins = <
338 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
339 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
340 >;
341 };
342
343 pinctrl_uart2: uart2grp {
344 fsl,pins = <
345 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
346 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
347 >;
348 };
349
350 pinctrl_uart3: uart3grp {
351 fsl,pins = <
352 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
353 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
354 >;
355 };
356
357 pinctrl_uart4: uart4grp {
358 fsl,pins = <
359 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
360 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
361 >;
362 };
363
364 pinctrl_uart5: uart5grp {
365 fsl,pins = <
366 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
367 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
368 >;
369 };
370
371 pinctrl_usbotg: usbotggrp {
372 fsl,pins = <
373 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
374 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
375 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* USB OTG POWER ENABLE */
376 >;
377 };
378
379 pinctrl_usdhc2: usdhc2grp {
380 fsl,pins = <
381 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
382 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
383 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
384 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
385 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
386 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
387 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* CD */
388 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* WP */
389 >;
390 };
391
392 pinctrl_usdhc3: usdhc3grp {
393 fsl,pins = <
394 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17009
395 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10009
396 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17009
397 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17009
398 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17009
399 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17009
400 MX6QDL_PAD_SD3_RST__SD3_RESET 0x17009
401 >;
402 };
403};