blob: 7cb50bcee8882a92cc4a1faf7561781ffc2394df [file] [log] [blame]
Mateusz Krawczukb672b272013-09-28 18:25:30 +02001/*
2 * Samsung's S5PV210 SoC device tree source
3 *
4 * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
5 *
6 * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
7 * Tomasz Figa <t.figa@samsung.com>
8 *
9 * Board device tree source for Torbreck board.
10 *
11 * NOTE: This file is completely based on original board file for mach-torbreck
12 * available in Linux 3.15 and intends to provide equivalent level of hardware
13 * support. Due to lack of hardware, _no_ testing has been performed.
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License version 2 as
17 * published by the Free Software Foundation.
18 */
19
20/dts-v1/;
21#include <dt-bindings/input/input.h>
22#include "s5pv210.dtsi"
23
24/ {
25 model = "aESOP Torbreck based on S5PV210";
26 compatible = "aesop,torbreck", "samsung,s5pv210";
27
28 chosen {
29 bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
30 };
31
Javier Martinez Canillas5271d002016-09-08 11:26:01 -040032 memory@20000000 {
Mateusz Krawczukb672b272013-09-28 18:25:30 +020033 device_type = "memory";
34 reg = <0x20000000 0x20000000>;
35 };
36};
37
38&xusbxti {
39 clock-frequency = <24000000>;
40};
41
42&uart0 {
43 status = "okay";
44};
45
46&uart1 {
47 status = "okay";
48};
49
50&uart2 {
51 status = "okay";
52};
53
54&uart3 {
55 status = "okay";
56};
57
58&rtc {
59 status = "okay";
60};
61
62&sdhci0 {
63 bus-width = <4>;
64 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
65 pinctrl-names = "default";
66 status = "okay";
67};
68
69&sdhci1 {
70 bus-width = <4>;
71 pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
72 pinctrl-names = "default";
73 status = "okay";
74};
75
76&sdhci2 {
77 bus-width = <4>;
78 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
79 pinctrl-names = "default";
80 status = "okay";
81};
82
83&sdhci3 {
84 bus-width = <4>;
85 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
86 pinctrl-names = "default";
87 status = "okay";
88};
89
90&i2s0 {
91 status = "okay";
92};