blob: 771ff66711af78efd79f8b41c2e2a28be2f26cdf [file] [log] [blame]
Kirill A. Shutemov026abc32012-03-08 16:02:20 +00001/*
2 * Copyright © 2011 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
22 *
23 */
24
25#include "mdfld_dsi_dpi.h"
26#include "mdfld_output.h"
27#include "mdfld_dsi_pkg_sender.h"
28#include "tc35876x-dsi-lvds.h"
29#include <linux/i2c/tc35876x.h>
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <asm/intel_scu_ipc.h>
33
34static struct i2c_client *tc35876x_client;
35static struct i2c_client *cmi_lcd_i2c_client;
36
37#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end))
38#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
39
40/* DSI D-PHY Layer Registers */
41#define D0W_DPHYCONTTX 0x0004
42#define CLW_DPHYCONTRX 0x0020
43#define D0W_DPHYCONTRX 0x0024
44#define D1W_DPHYCONTRX 0x0028
45#define D2W_DPHYCONTRX 0x002C
46#define D3W_DPHYCONTRX 0x0030
47#define COM_DPHYCONTRX 0x0038
48#define CLW_CNTRL 0x0040
49#define D0W_CNTRL 0x0044
50#define D1W_CNTRL 0x0048
51#define D2W_CNTRL 0x004C
52#define D3W_CNTRL 0x0050
53#define DFTMODE_CNTRL 0x0054
54
55/* DSI PPI Layer Registers */
56#define PPI_STARTPPI 0x0104
57#define PPI_BUSYPPI 0x0108
58#define PPI_LINEINITCNT 0x0110
59#define PPI_LPTXTIMECNT 0x0114
60#define PPI_LANEENABLE 0x0134
61#define PPI_TX_RX_TA 0x013C
62#define PPI_CLS_ATMR 0x0140
63#define PPI_D0S_ATMR 0x0144
64#define PPI_D1S_ATMR 0x0148
65#define PPI_D2S_ATMR 0x014C
66#define PPI_D3S_ATMR 0x0150
67#define PPI_D0S_CLRSIPOCOUNT 0x0164
68#define PPI_D1S_CLRSIPOCOUNT 0x0168
69#define PPI_D2S_CLRSIPOCOUNT 0x016C
70#define PPI_D3S_CLRSIPOCOUNT 0x0170
71#define CLS_PRE 0x0180
72#define D0S_PRE 0x0184
73#define D1S_PRE 0x0188
74#define D2S_PRE 0x018C
75#define D3S_PRE 0x0190
76#define CLS_PREP 0x01A0
77#define D0S_PREP 0x01A4
78#define D1S_PREP 0x01A8
79#define D2S_PREP 0x01AC
80#define D3S_PREP 0x01B0
81#define CLS_ZERO 0x01C0
82#define D0S_ZERO 0x01C4
83#define D1S_ZERO 0x01C8
84#define D2S_ZERO 0x01CC
85#define D3S_ZERO 0x01D0
86#define PPI_CLRFLG 0x01E0
87#define PPI_CLRSIPO 0x01E4
88#define HSTIMEOUT 0x01F0
89#define HSTIMEOUTENABLE 0x01F4
90
91/* DSI Protocol Layer Registers */
92#define DSI_STARTDSI 0x0204
93#define DSI_BUSYDSI 0x0208
94#define DSI_LANEENABLE 0x0210
95#define DSI_LANESTATUS0 0x0214
96#define DSI_LANESTATUS1 0x0218
97#define DSI_INTSTATUS 0x0220
98#define DSI_INTMASK 0x0224
99#define DSI_INTCLR 0x0228
100#define DSI_LPTXTO 0x0230
101
102/* DSI General Registers */
103#define DSIERRCNT 0x0300
104
105/* DSI Application Layer Registers */
106#define APLCTRL 0x0400
107#define RDPKTLN 0x0404
108
109/* Video Path Registers */
110#define VPCTRL 0x0450
111#define HTIM1 0x0454
112#define HTIM2 0x0458
113#define VTIM1 0x045C
114#define VTIM2 0x0460
115#define VFUEN 0x0464
116
117/* LVDS Registers */
118#define LVMX0003 0x0480
119#define LVMX0407 0x0484
120#define LVMX0811 0x0488
121#define LVMX1215 0x048C
122#define LVMX1619 0x0490
123#define LVMX2023 0x0494
124#define LVMX2427 0x0498
125#define LVCFG 0x049C
126#define LVPHY0 0x04A0
127#define LVPHY1 0x04A4
128
129/* System Registers */
130#define SYSSTAT 0x0500
131#define SYSRST 0x0504
132
133/* GPIO Registers */
134/*#define GPIOC 0x0520*/
135#define GPIOO 0x0524
136#define GPIOI 0x0528
137
138/* I2C Registers */
139#define I2CTIMCTRL 0x0540
140#define I2CMADDR 0x0544
141#define WDATAQ 0x0548
142#define RDATAQ 0x054C
143
144/* Chip/Rev Registers */
145#define IDREG 0x0580
146
147/* Debug Registers */
148#define DEBUG00 0x05A0
149#define DEBUG01 0x05A4
150
151/* Panel CABC registers */
152#define PANEL_PWM_CONTROL 0x90
153#define PANEL_FREQ_DIVIDER_HI 0x91
154#define PANEL_FREQ_DIVIDER_LO 0x92
155#define PANEL_DUTY_CONTROL 0x93
156#define PANEL_MODIFY_RGB 0x94
157#define PANEL_FRAMERATE_CONTROL 0x96
158#define PANEL_PWM_MIN 0x97
159#define PANEL_PWM_REF 0x98
160#define PANEL_PWM_MAX 0x99
161#define PANEL_ALLOW_DISTORT 0x9A
162#define PANEL_BYPASS_PWMI 0x9B
163
164/* Panel color management registers */
165#define PANEL_CM_ENABLE 0x700
166#define PANEL_CM_HUE 0x701
167#define PANEL_CM_SATURATION 0x702
168#define PANEL_CM_INTENSITY 0x703
169#define PANEL_CM_BRIGHTNESS 0x704
170#define PANEL_CM_CE_ENABLE 0x705
171#define PANEL_CM_PEAK_EN 0x710
172#define PANEL_CM_GAIN 0x711
173#define PANEL_CM_HUETABLE_START 0x730
174#define PANEL_CM_HUETABLE_END 0x747 /* inclusive */
175
176/* Input muxing for registers LVMX0003...LVMX2427 */
177enum {
178 INPUT_R0, /* 0 */
179 INPUT_R1,
180 INPUT_R2,
181 INPUT_R3,
182 INPUT_R4,
183 INPUT_R5,
184 INPUT_R6,
185 INPUT_R7,
186 INPUT_G0, /* 8 */
187 INPUT_G1,
188 INPUT_G2,
189 INPUT_G3,
190 INPUT_G4,
191 INPUT_G5,
192 INPUT_G6,
193 INPUT_G7,
194 INPUT_B0, /* 16 */
195 INPUT_B1,
196 INPUT_B2,
197 INPUT_B3,
198 INPUT_B4,
199 INPUT_B5,
200 INPUT_B6,
201 INPUT_B7,
202 INPUT_HSYNC, /* 24 */
203 INPUT_VSYNC,
204 INPUT_DE,
205 LOGIC_0,
206 /* 28...31 undefined */
207};
208
209#define INPUT_MUX(lvmx03, lvmx02, lvmx01, lvmx00) \
210 (FLD_VAL(lvmx03, 29, 24) | FLD_VAL(lvmx02, 20, 16) | \
211 FLD_VAL(lvmx01, 12, 8) | FLD_VAL(lvmx00, 4, 0))
212
213/**
214 * tc35876x_regw - Write DSI-LVDS bridge register using I2C
215 * @client: struct i2c_client to use
216 * @reg: register address
217 * @value: value to write
218 *
219 * Returns 0 on success, or a negative error value.
220 */
221static int tc35876x_regw(struct i2c_client *client, u16 reg, u32 value)
222{
223 int r;
224 u8 tx_data[] = {
225 /* NOTE: Register address big-endian, data little-endian. */
226 (reg >> 8) & 0xff,
227 reg & 0xff,
228 value & 0xff,
229 (value >> 8) & 0xff,
230 (value >> 16) & 0xff,
231 (value >> 24) & 0xff,
232 };
233 struct i2c_msg msgs[] = {
234 {
235 .addr = client->addr,
236 .flags = 0,
237 .buf = tx_data,
238 .len = ARRAY_SIZE(tx_data),
239 },
240 };
241
242 r = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
243 if (r < 0) {
244 dev_err(&client->dev, "%s: reg 0x%04x val 0x%08x error %d\n",
245 __func__, reg, value, r);
246 return r;
247 }
248
249 if (r < ARRAY_SIZE(msgs)) {
250 dev_err(&client->dev, "%s: reg 0x%04x val 0x%08x msgs %d\n",
251 __func__, reg, value, r);
252 return -EAGAIN;
253 }
254
255 dev_dbg(&client->dev, "%s: reg 0x%04x val 0x%08x\n",
256 __func__, reg, value);
257
258 return 0;
259}
260
261/**
262 * tc35876x_regr - Read DSI-LVDS bridge register using I2C
263 * @client: struct i2c_client to use
264 * @reg: register address
265 * @value: pointer for storing the value
266 *
267 * Returns 0 on success, or a negative error value.
268 */
269static int tc35876x_regr(struct i2c_client *client, u16 reg, u32 *value)
270{
271 int r;
272 u8 tx_data[] = {
273 (reg >> 8) & 0xff,
274 reg & 0xff,
275 };
276 u8 rx_data[4];
277 struct i2c_msg msgs[] = {
278 {
279 .addr = client->addr,
280 .flags = 0,
281 .buf = tx_data,
282 .len = ARRAY_SIZE(tx_data),
283 },
284 {
285 .addr = client->addr,
286 .flags = I2C_M_RD,
287 .buf = rx_data,
288 .len = ARRAY_SIZE(rx_data),
289 },
290 };
291
292 r = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
293 if (r < 0) {
294 dev_err(&client->dev, "%s: reg 0x%04x error %d\n", __func__,
295 reg, r);
296 return r;
297 }
298
299 if (r < ARRAY_SIZE(msgs)) {
300 dev_err(&client->dev, "%s: reg 0x%04x msgs %d\n", __func__,
301 reg, r);
302 return -EAGAIN;
303 }
304
305 *value = rx_data[0] << 24 | rx_data[1] << 16 |
306 rx_data[2] << 8 | rx_data[3];
307
308 dev_dbg(&client->dev, "%s: reg 0x%04x value 0x%08x\n", __func__,
309 reg, *value);
310
311 return 0;
312}
313
314void tc35876x_set_bridge_reset_state(struct drm_device *dev, int state)
315{
316 struct tc35876x_platform_data *pdata;
317
318 if (WARN(!tc35876x_client, "%s called before probe", __func__))
319 return;
320
321 dev_dbg(&tc35876x_client->dev, "%s: state %d\n", __func__, state);
322
323 pdata = dev_get_platdata(&tc35876x_client->dev);
324
325 if (pdata->gpio_bridge_reset == -1)
326 return;
327
328 if (state) {
329 gpio_set_value_cansleep(pdata->gpio_bridge_reset, 0);
330 mdelay(10);
331 } else {
332 /* Pull MIPI Bridge reset pin to Low */
333 gpio_set_value_cansleep(pdata->gpio_bridge_reset, 0);
334 mdelay(20);
335 /* Pull MIPI Bridge reset pin to High */
336 gpio_set_value_cansleep(pdata->gpio_bridge_reset, 1);
337 mdelay(40);
338 }
339}
340
341void tc35876x_configure_lvds_bridge(struct drm_device *dev)
342{
343 struct i2c_client *i2c = tc35876x_client;
344 u32 ppi_lptxtimecnt;
345 u32 txtagocnt;
346 u32 txtasurecnt;
347 u32 id;
348
349 if (WARN(!tc35876x_client, "%s called before probe", __func__))
350 return;
351
352 dev_dbg(&tc35876x_client->dev, "%s\n", __func__);
353
354 if (!tc35876x_regr(i2c, IDREG, &id))
355 dev_info(&tc35876x_client->dev, "tc35876x ID 0x%08x\n", id);
356 else
357 dev_err(&tc35876x_client->dev, "Cannot read ID\n");
358
359 ppi_lptxtimecnt = 4;
360 txtagocnt = (5 * ppi_lptxtimecnt - 3) / 4;
361 txtasurecnt = 3 * ppi_lptxtimecnt / 2;
362 tc35876x_regw(i2c, PPI_TX_RX_TA, FLD_VAL(txtagocnt, 26, 16) |
363 FLD_VAL(txtasurecnt, 10, 0));
364 tc35876x_regw(i2c, PPI_LPTXTIMECNT, FLD_VAL(ppi_lptxtimecnt, 10, 0));
365
366 tc35876x_regw(i2c, PPI_D0S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0));
367 tc35876x_regw(i2c, PPI_D1S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0));
368 tc35876x_regw(i2c, PPI_D2S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0));
369 tc35876x_regw(i2c, PPI_D3S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0));
370
371 /* Enabling MIPI & PPI lanes, Enable 4 lanes */
372 tc35876x_regw(i2c, PPI_LANEENABLE,
373 BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0));
374 tc35876x_regw(i2c, DSI_LANEENABLE,
375 BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0));
376 tc35876x_regw(i2c, PPI_STARTPPI, BIT(0));
377 tc35876x_regw(i2c, DSI_STARTDSI, BIT(0));
378
379 /* Setting LVDS output frequency */
380 tc35876x_regw(i2c, LVPHY0, FLD_VAL(1, 20, 16) |
381 FLD_VAL(2, 15, 14) | FLD_VAL(6, 4, 0)); /* 0x00048006 */
382
383 /* Setting video panel control register,0x00000120 VTGen=ON ?!?!? */
384 tc35876x_regw(i2c, VPCTRL, BIT(8) | BIT(5));
385
386 /* Horizontal back porch and horizontal pulse width. 0x00280028 */
387 tc35876x_regw(i2c, HTIM1, FLD_VAL(40, 24, 16) | FLD_VAL(40, 8, 0));
388
389 /* Horizontal front porch and horizontal active video size. 0x00500500*/
390 tc35876x_regw(i2c, HTIM2, FLD_VAL(80, 24, 16) | FLD_VAL(1280, 10, 0));
391
392 /* Vertical back porch and vertical sync pulse width. 0x000e000a */
393 tc35876x_regw(i2c, VTIM1, FLD_VAL(14, 23, 16) | FLD_VAL(10, 7, 0));
394
395 /* Vertical front porch and vertical display size. 0x000e0320 */
396 tc35876x_regw(i2c, VTIM2, FLD_VAL(14, 23, 16) | FLD_VAL(800, 10, 0));
397
398 /* Set above HTIM1, HTIM2, VTIM1, and VTIM2 at next VSYNC. */
399 tc35876x_regw(i2c, VFUEN, BIT(0));
400
401 /* Soft reset LCD controller. */
402 tc35876x_regw(i2c, SYSRST, BIT(2));
403
404 /* LVDS-TX input muxing */
405 tc35876x_regw(i2c, LVMX0003,
406 INPUT_MUX(INPUT_R5, INPUT_R4, INPUT_R3, INPUT_R2));
407 tc35876x_regw(i2c, LVMX0407,
408 INPUT_MUX(INPUT_G2, INPUT_R7, INPUT_R1, INPUT_R6));
409 tc35876x_regw(i2c, LVMX0811,
410 INPUT_MUX(INPUT_G1, INPUT_G0, INPUT_G4, INPUT_G3));
411 tc35876x_regw(i2c, LVMX1215,
412 INPUT_MUX(INPUT_B2, INPUT_G7, INPUT_G6, INPUT_G5));
413 tc35876x_regw(i2c, LVMX1619,
414 INPUT_MUX(INPUT_B4, INPUT_B3, INPUT_B1, INPUT_B0));
415 tc35876x_regw(i2c, LVMX2023,
416 INPUT_MUX(LOGIC_0, INPUT_B7, INPUT_B6, INPUT_B5));
417 tc35876x_regw(i2c, LVMX2427,
418 INPUT_MUX(INPUT_R0, INPUT_DE, INPUT_VSYNC, INPUT_HSYNC));
419
420 /* Enable LVDS transmitter. */
421 tc35876x_regw(i2c, LVCFG, BIT(0));
422
423 /* Clear notifications. Don't write reserved bits. Was write 0xffffffff
424 * to 0x0288, must be in error?! */
425 tc35876x_regw(i2c, DSI_INTCLR, FLD_MASK(31, 30) | FLD_MASK(22, 0));
426}
427
428#define GPIOPWMCTRL 0x38F
429#define PWM0CLKDIV0 0x62 /* low byte */
430#define PWM0CLKDIV1 0x61 /* high byte */
431
432#define SYSTEMCLK 19200000UL /* 19.2 MHz */
433#define PWM_FREQUENCY 9600 /* Hz */
434
435/* f = baseclk / (clkdiv + 1) => clkdiv = (baseclk - f) / f */
436static inline u16 calc_clkdiv(unsigned long baseclk, unsigned int f)
437{
438 return (baseclk - f) / f;
439}
440
441static void tc35876x_brightness_init(struct drm_device *dev)
442{
443 int ret;
444 u8 pwmctrl;
445 u16 clkdiv;
446
447 /* Make sure the PWM reference is the 19.2 MHz system clock. Read first
448 * instead of setting directly to catch potential conflicts between PWM
449 * users. */
450 ret = intel_scu_ipc_ioread8(GPIOPWMCTRL, &pwmctrl);
451 if (ret || pwmctrl != 0x01) {
452 if (ret)
453 dev_err(&dev->pdev->dev, "GPIOPWMCTRL read failed\n");
454 else
455 dev_warn(&dev->pdev->dev, "GPIOPWMCTRL was not set to system clock (pwmctrl = 0x%02x)\n", pwmctrl);
456
457 ret = intel_scu_ipc_iowrite8(GPIOPWMCTRL, 0x01);
458 if (ret)
459 dev_err(&dev->pdev->dev, "GPIOPWMCTRL set failed\n");
460 }
461
462 clkdiv = calc_clkdiv(SYSTEMCLK, PWM_FREQUENCY);
463
464 ret = intel_scu_ipc_iowrite8(PWM0CLKDIV1, (clkdiv >> 8) & 0xff);
465 if (!ret)
466 ret = intel_scu_ipc_iowrite8(PWM0CLKDIV0, clkdiv & 0xff);
467
468 if (ret)
469 dev_err(&dev->pdev->dev, "PWM0CLKDIV set failed\n");
470 else
471 dev_dbg(&dev->pdev->dev, "PWM0CLKDIV set to 0x%04x (%d Hz)\n",
472 clkdiv, PWM_FREQUENCY);
473}
474
475#define PWM0DUTYCYCLE 0x67
476
477void tc35876x_brightness_control(struct drm_device *dev, int level)
478{
479 int ret;
480 u8 duty_val;
481 u8 panel_duty_val;
482
483 level = clamp(level, 0, MDFLD_DSI_BRIGHTNESS_MAX_LEVEL);
484
485 /* PWM duty cycle 0x00...0x63 corresponds to 0...99% */
486 duty_val = level * 0x63 / MDFLD_DSI_BRIGHTNESS_MAX_LEVEL;
487
488 /* I won't pretend to understand this formula. The panel spec is quite
489 * bad engrish.
490 */
491 panel_duty_val = (2 * level - 100) * 0xA9 /
492 MDFLD_DSI_BRIGHTNESS_MAX_LEVEL + 0x56;
493
494 ret = intel_scu_ipc_iowrite8(PWM0DUTYCYCLE, duty_val);
495 if (ret)
496 dev_err(&tc35876x_client->dev, "%s: ipc write fail\n",
497 __func__);
498
499 if (cmi_lcd_i2c_client) {
500 ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client,
501 PANEL_PWM_MAX, panel_duty_val);
502 if (ret < 0)
503 dev_err(&cmi_lcd_i2c_client->dev, "%s: i2c write failed\n",
504 __func__);
505 }
506}
507
508void tc35876x_toshiba_bridge_panel_off(struct drm_device *dev)
509{
510 struct tc35876x_platform_data *pdata;
511
512 if (WARN(!tc35876x_client, "%s called before probe", __func__))
513 return;
514
515 dev_dbg(&tc35876x_client->dev, "%s\n", __func__);
516
517 pdata = dev_get_platdata(&tc35876x_client->dev);
518
519 if (pdata->gpio_panel_bl_en != -1)
520 gpio_set_value_cansleep(pdata->gpio_panel_bl_en, 0);
521
522 if (pdata->gpio_panel_vadd != -1)
523 gpio_set_value_cansleep(pdata->gpio_panel_vadd, 0);
524}
525
526void tc35876x_toshiba_bridge_panel_on(struct drm_device *dev)
527{
528 struct tc35876x_platform_data *pdata;
529 struct drm_psb_private *dev_priv = dev->dev_private;
530
531 if (WARN(!tc35876x_client, "%s called before probe", __func__))
532 return;
533
534 dev_dbg(&tc35876x_client->dev, "%s\n", __func__);
535
536 pdata = dev_get_platdata(&tc35876x_client->dev);
537
538 if (pdata->gpio_panel_vadd != -1) {
539 gpio_set_value_cansleep(pdata->gpio_panel_vadd, 1);
540 msleep(260);
541 }
542
543 if (cmi_lcd_i2c_client) {
544 int ret;
545 dev_dbg(&cmi_lcd_i2c_client->dev, "setting TCON\n");
546 /* Bit 4 is average_saving. Setting it to 1, the brightness is
547 * referenced to the average of the frame content. 0 means
548 * reference to the maximum of frame contents. Bits 3:0 are
549 * allow_distort. When set to a nonzero value, all color values
550 * between 255-allow_distort*2 and 255 are mapped to the
551 * 255-allow_distort*2 value.
552 */
553 ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client,
554 PANEL_ALLOW_DISTORT, 0x10);
555 if (ret < 0)
556 dev_err(&cmi_lcd_i2c_client->dev,
557 "i2c write failed (%d)\n", ret);
558 ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client,
559 PANEL_BYPASS_PWMI, 0);
560 if (ret < 0)
561 dev_err(&cmi_lcd_i2c_client->dev,
562 "i2c write failed (%d)\n", ret);
563 /* Set minimum brightness value - this is tunable */
564 ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client,
565 PANEL_PWM_MIN, 0x35);
566 if (ret < 0)
567 dev_err(&cmi_lcd_i2c_client->dev,
568 "i2c write failed (%d)\n", ret);
569 }
570
571 if (pdata->gpio_panel_bl_en != -1)
572 gpio_set_value_cansleep(pdata->gpio_panel_bl_en, 1);
573
574 tc35876x_brightness_control(dev, dev_priv->brightness_adjusted);
575}
576
577static struct drm_display_mode *tc35876x_get_config_mode(struct drm_device *dev)
578{
579 struct drm_display_mode *mode;
580
581 dev_dbg(&dev->pdev->dev, "%s\n", __func__);
582
583 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
584 if (!mode)
585 return NULL;
586
587 /* FIXME: do this properly. */
588 mode->hdisplay = 1280;
589 mode->vdisplay = 800;
590 mode->hsync_start = 1360;
591 mode->hsync_end = 1400;
592 mode->htotal = 1440;
593 mode->vsync_start = 814;
594 mode->vsync_end = 824;
595 mode->vtotal = 838;
596 mode->clock = 33324 << 1;
597
598 dev_info(&dev->pdev->dev, "hdisplay(w) = %d\n", mode->hdisplay);
599 dev_info(&dev->pdev->dev, "vdisplay(h) = %d\n", mode->vdisplay);
600 dev_info(&dev->pdev->dev, "HSS = %d\n", mode->hsync_start);
601 dev_info(&dev->pdev->dev, "HSE = %d\n", mode->hsync_end);
602 dev_info(&dev->pdev->dev, "htotal = %d\n", mode->htotal);
603 dev_info(&dev->pdev->dev, "VSS = %d\n", mode->vsync_start);
604 dev_info(&dev->pdev->dev, "VSE = %d\n", mode->vsync_end);
605 dev_info(&dev->pdev->dev, "vtotal = %d\n", mode->vtotal);
606 dev_info(&dev->pdev->dev, "clock = %d\n", mode->clock);
607
608 drm_mode_set_name(mode);
609 drm_mode_set_crtcinfo(mode, 0);
610
611 mode->type |= DRM_MODE_TYPE_PREFERRED;
612
613 return mode;
614}
615
616/* DV1 Active area 216.96 x 135.6 mm */
617#define DV1_PANEL_WIDTH 217
618#define DV1_PANEL_HEIGHT 136
619
620static int tc35876x_get_panel_info(struct drm_device *dev, int pipe,
621 struct panel_info *pi)
622{
623 if (!dev || !pi)
624 return -EINVAL;
625
626 pi->width_mm = DV1_PANEL_WIDTH;
627 pi->height_mm = DV1_PANEL_HEIGHT;
628
629 return 0;
630}
631
632static int tc35876x_bridge_probe(struct i2c_client *client,
633 const struct i2c_device_id *id)
634{
635 struct tc35876x_platform_data *pdata;
636
637 dev_info(&client->dev, "%s\n", __func__);
638
639 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
640 dev_err(&client->dev, "%s: i2c_check_functionality() failed\n",
641 __func__);
642 return -ENODEV;
643 }
644
645 pdata = dev_get_platdata(&client->dev);
646 if (!pdata) {
647 dev_err(&client->dev, "%s: no platform data\n", __func__);
648 return -ENODEV;
649 }
650
651 if (pdata->gpio_bridge_reset != -1) {
652 gpio_request(pdata->gpio_bridge_reset, "tc35876x bridge reset");
653 gpio_direction_output(pdata->gpio_bridge_reset, 0);
654 }
655
656 if (pdata->gpio_panel_bl_en != -1) {
657 gpio_request(pdata->gpio_panel_bl_en, "tc35876x panel bl en");
658 gpio_direction_output(pdata->gpio_panel_bl_en, 0);
659 }
660
661 if (pdata->gpio_panel_vadd != -1) {
662 gpio_request(pdata->gpio_panel_vadd, "tc35876x panel vadd");
663 gpio_direction_output(pdata->gpio_panel_vadd, 0);
664 }
665
666 tc35876x_client = client;
667
668 return 0;
669}
670
671static int tc35876x_bridge_remove(struct i2c_client *client)
672{
673 struct tc35876x_platform_data *pdata = dev_get_platdata(&client->dev);
674
675 dev_dbg(&client->dev, "%s\n", __func__);
676
677 if (pdata->gpio_bridge_reset != -1)
678 gpio_free(pdata->gpio_bridge_reset);
679
680 if (pdata->gpio_panel_bl_en != -1)
681 gpio_free(pdata->gpio_panel_bl_en);
682
683 if (pdata->gpio_panel_vadd != -1)
684 gpio_free(pdata->gpio_panel_vadd);
685
686 tc35876x_client = NULL;
687
688 return 0;
689}
690
691static const struct i2c_device_id tc35876x_bridge_id[] = {
692 { "i2c_disp_brig", 0 },
693 { }
694};
695MODULE_DEVICE_TABLE(i2c, tc35876x_bridge_id);
696
697static struct i2c_driver tc35876x_bridge_i2c_driver = {
698 .driver = {
699 .name = "i2c_disp_brig",
700 },
701 .id_table = tc35876x_bridge_id,
702 .probe = tc35876x_bridge_probe,
Greg Kroah-Hartman56550d92012-12-21 15:09:25 -0800703 .remove = tc35876x_bridge_remove,
Kirill A. Shutemov026abc32012-03-08 16:02:20 +0000704};
705
706/* LCD panel I2C */
707static int cmi_lcd_i2c_probe(struct i2c_client *client,
708 const struct i2c_device_id *id)
709{
710 dev_info(&client->dev, "%s\n", __func__);
711
712 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
713 dev_err(&client->dev, "%s: i2c_check_functionality() failed\n",
714 __func__);
715 return -ENODEV;
716 }
717
718 cmi_lcd_i2c_client = client;
719
720 return 0;
721}
722
723static int cmi_lcd_i2c_remove(struct i2c_client *client)
724{
725 dev_dbg(&client->dev, "%s\n", __func__);
726
727 cmi_lcd_i2c_client = NULL;
728
729 return 0;
730}
731
732static const struct i2c_device_id cmi_lcd_i2c_id[] = {
733 { "cmi-lcd", 0 },
734 { }
735};
736MODULE_DEVICE_TABLE(i2c, cmi_lcd_i2c_id);
737
738static struct i2c_driver cmi_lcd_i2c_driver = {
739 .driver = {
740 .name = "cmi-lcd",
741 },
742 .id_table = cmi_lcd_i2c_id,
743 .probe = cmi_lcd_i2c_probe,
Greg Kroah-Hartman56550d92012-12-21 15:09:25 -0800744 .remove = cmi_lcd_i2c_remove,
Kirill A. Shutemov026abc32012-03-08 16:02:20 +0000745};
746
747/* HACK to create I2C device while it's not created by platform code */
748#define CMI_LCD_I2C_ADAPTER 2
749#define CMI_LCD_I2C_ADDR 0x60
750
751static int cmi_lcd_hack_create_device(void)
752{
753 struct i2c_adapter *adapter;
754 struct i2c_client *client;
755 struct i2c_board_info info = {
756 .type = "cmi-lcd",
757 .addr = CMI_LCD_I2C_ADDR,
758 };
759
760 pr_debug("%s\n", __func__);
761
762 adapter = i2c_get_adapter(CMI_LCD_I2C_ADAPTER);
763 if (!adapter) {
764 pr_err("%s: i2c_get_adapter(%d) failed\n", __func__,
765 CMI_LCD_I2C_ADAPTER);
766 return -EINVAL;
767 }
768
769 client = i2c_new_device(adapter, &info);
770 if (!client) {
771 pr_err("%s: i2c_new_device() failed\n", __func__);
772 i2c_put_adapter(adapter);
773 return -EINVAL;
774 }
775
776 return 0;
777}
778
779static const struct drm_encoder_helper_funcs tc35876x_encoder_helper_funcs = {
780 .dpms = mdfld_dsi_dpi_dpms,
781 .mode_fixup = mdfld_dsi_dpi_mode_fixup,
782 .prepare = mdfld_dsi_dpi_prepare,
783 .mode_set = mdfld_dsi_dpi_mode_set,
784 .commit = mdfld_dsi_dpi_commit,
785};
786
787static const struct drm_encoder_funcs tc35876x_encoder_funcs = {
788 .destroy = drm_encoder_cleanup,
789};
790
791const struct panel_funcs mdfld_tc35876x_funcs = {
792 .encoder_funcs = &tc35876x_encoder_funcs,
793 .encoder_helper_funcs = &tc35876x_encoder_helper_funcs,
794 .get_config_mode = tc35876x_get_config_mode,
795 .get_panel_info = tc35876x_get_panel_info,
796};
797
798void tc35876x_init(struct drm_device *dev)
799{
800 int r;
801
802 dev_dbg(&dev->pdev->dev, "%s\n", __func__);
803
804 cmi_lcd_hack_create_device();
805
806 r = i2c_add_driver(&cmi_lcd_i2c_driver);
807 if (r < 0)
808 dev_err(&dev->pdev->dev,
809 "%s: i2c_add_driver() for %s failed (%d)\n",
810 __func__, cmi_lcd_i2c_driver.driver.name, r);
811
812 r = i2c_add_driver(&tc35876x_bridge_i2c_driver);
813 if (r < 0)
814 dev_err(&dev->pdev->dev,
815 "%s: i2c_add_driver() for %s failed (%d)\n",
816 __func__, tc35876x_bridge_i2c_driver.driver.name, r);
817
818 tc35876x_brightness_init(dev);
819}
820
821void tc35876x_exit(void)
822{
823 pr_debug("%s\n", __func__);
824
825 i2c_del_driver(&tc35876x_bridge_i2c_driver);
826
827 if (cmi_lcd_i2c_client)
828 i2c_del_driver(&cmi_lcd_i2c_driver);
829}