blob: ef91e2a4a5673b9045c636a24adda1ae0734d187 [file] [log] [blame]
Corentin Labbecae2caa2007-02-14 21:15:04 +01001/*
2 * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
3 *
4 * Copyright (C) 2006 Corentin LABBE <corentin.labbe@geomatys.fr>
5 *
6 * Based on LM83 Driver by Jean Delvare <khali@linux-fr.org>
7 *
8 * Give only processor, motherboard temperatures and fan tachs
9 * Very rare chip please let me know if you use it
10 *
11 * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf
12 *
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation version 2 of the License
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 */
27
28#include <linux/module.h>
29#include <linux/init.h>
30#include <linux/slab.h>
31#include <linux/jiffies.h>
32#include <linux/i2c.h>
33#include <linux/hwmon-sysfs.h>
34#include <linux/hwmon.h>
35#include <linux/err.h>
36#include <linux/mutex.h>
37
38/*
39 * Addresses to scan
40 */
41
Mark M. Hoffman25e9c862008-02-17 22:28:03 -050042static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
43 0x2e, 0x2f, I2C_CLIENT_END
Corentin Labbecae2caa2007-02-14 21:15:04 +010044};
45
46/*
47 * Insmod parameters
48 */
49
50I2C_CLIENT_INSMOD_1(adm1029);
51
52/*
53 * The ADM1029 registers
54 * Manufacturer ID is 0x41 for Analog Devices
55 */
56
57#define ADM1029_REG_MAN_ID 0x0D
58#define ADM1029_REG_CHIP_ID 0x0E
59#define ADM1029_REG_CONFIG 0x01
60#define ADM1029_REG_NB_FAN_SUPPORT 0x02
61
62#define ADM1029_REG_TEMP_DEVICES_INSTALLED 0x06
63
64#define ADM1029_REG_LOCAL_TEMP 0xA0
65#define ADM1029_REG_REMOTE1_TEMP 0xA1
66#define ADM1029_REG_REMOTE2_TEMP 0xA2
67
68#define ADM1029_REG_LOCAL_TEMP_HIGH 0x90
69#define ADM1029_REG_REMOTE1_TEMP_HIGH 0x91
70#define ADM1029_REG_REMOTE2_TEMP_HIGH 0x92
71
72#define ADM1029_REG_LOCAL_TEMP_LOW 0x98
73#define ADM1029_REG_REMOTE1_TEMP_LOW 0x99
74#define ADM1029_REG_REMOTE2_TEMP_LOW 0x9A
75
76#define ADM1029_REG_FAN1 0x70
77#define ADM1029_REG_FAN2 0x71
78
79#define ADM1029_REG_FAN1_MIN 0x78
80#define ADM1029_REG_FAN2_MIN 0x79
81
82#define ADM1029_REG_FAN1_CONFIG 0x68
83#define ADM1029_REG_FAN2_CONFIG 0x69
84
85#define TEMP_FROM_REG(val) ((val) * 1000)
86
87#define DIV_FROM_REG(val) ( 1 << (((val) >> 6) - 1))
88
89/* Registers to be checked by adm1029_update_device() */
90static const u8 ADM1029_REG_TEMP[] = {
91 ADM1029_REG_LOCAL_TEMP,
92 ADM1029_REG_REMOTE1_TEMP,
93 ADM1029_REG_REMOTE2_TEMP,
94 ADM1029_REG_LOCAL_TEMP_HIGH,
95 ADM1029_REG_REMOTE1_TEMP_HIGH,
96 ADM1029_REG_REMOTE2_TEMP_HIGH,
97 ADM1029_REG_LOCAL_TEMP_LOW,
98 ADM1029_REG_REMOTE1_TEMP_LOW,
99 ADM1029_REG_REMOTE2_TEMP_LOW,
100};
101
102static const u8 ADM1029_REG_FAN[] = {
103 ADM1029_REG_FAN1,
104 ADM1029_REG_FAN2,
105 ADM1029_REG_FAN1_MIN,
106 ADM1029_REG_FAN2_MIN,
107};
108
109static const u8 ADM1029_REG_FAN_DIV[] = {
110 ADM1029_REG_FAN1_CONFIG,
111 ADM1029_REG_FAN2_CONFIG,
112};
113
114/*
115 * Functions declaration
116 */
117
Jean Delvare9c97fb42008-07-16 19:30:09 +0200118static int adm1029_probe(struct i2c_client *client,
119 const struct i2c_device_id *id);
120static int adm1029_detect(struct i2c_client *client, int kind,
121 struct i2c_board_info *info);
122static int adm1029_remove(struct i2c_client *client);
Corentin Labbecae2caa2007-02-14 21:15:04 +0100123static struct adm1029_data *adm1029_update_device(struct device *dev);
124static int adm1029_init_client(struct i2c_client *client);
125
126/*
127 * Driver data (common to all clients)
128 */
129
Jean Delvare9c97fb42008-07-16 19:30:09 +0200130static const struct i2c_device_id adm1029_id[] = {
131 { "adm1029", adm1029 },
132 { }
133};
134MODULE_DEVICE_TABLE(i2c, adm1029_id);
135
Corentin Labbecae2caa2007-02-14 21:15:04 +0100136static struct i2c_driver adm1029_driver = {
Jean Delvare9c97fb42008-07-16 19:30:09 +0200137 .class = I2C_CLASS_HWMON,
Corentin Labbecae2caa2007-02-14 21:15:04 +0100138 .driver = {
139 .name = "adm1029",
140 },
Jean Delvare9c97fb42008-07-16 19:30:09 +0200141 .probe = adm1029_probe,
142 .remove = adm1029_remove,
143 .id_table = adm1029_id,
144 .detect = adm1029_detect,
145 .address_data = &addr_data,
Corentin Labbecae2caa2007-02-14 21:15:04 +0100146};
147
148/*
149 * Client data (each client gets its own)
150 */
151
152struct adm1029_data {
Tony Jones1beeffe2007-08-20 13:46:20 -0700153 struct device *hwmon_dev;
Corentin Labbecae2caa2007-02-14 21:15:04 +0100154 struct mutex update_lock;
155 char valid; /* zero until following fields are valid */
156 unsigned long last_updated; /* in jiffies */
157
158 /* registers values, signed for temperature, unsigned for other stuff */
159 s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)];
160 u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)];
161 u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)];
162};
163
164/*
165 * Sysfs stuff
166 */
167
168static ssize_t
169show_temp(struct device *dev, struct device_attribute *devattr, char *buf)
170{
171 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
172 struct adm1029_data *data = adm1029_update_device(dev);
173 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
174}
175
176static ssize_t
177show_fan(struct device *dev, struct device_attribute *devattr, char *buf)
178{
179 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
180 struct adm1029_data *data = adm1029_update_device(dev);
181 u16 val;
Corentin Labbe366716e2008-10-17 17:51:20 +0200182 if (data->fan[attr->index] == 0
183 || (data->fan_div[attr->index] & 0xC0) == 0
Corentin Labbecae2caa2007-02-14 21:15:04 +0100184 || data->fan[attr->index] == 255) {
185 return sprintf(buf, "0\n");
186 }
187
188 val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index])
189 / data->fan[attr->index];
190 return sprintf(buf, "%d\n", val);
191}
192
193static ssize_t
194show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
195{
196 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
197 struct adm1029_data *data = adm1029_update_device(dev);
Corentin Labbe366716e2008-10-17 17:51:20 +0200198 if ((data->fan_div[attr->index] & 0xC0) == 0)
Corentin Labbecae2caa2007-02-14 21:15:04 +0100199 return sprintf(buf, "0\n");
200 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
201}
202
203static ssize_t set_fan_div(struct device *dev,
204 struct device_attribute *devattr, const char *buf, size_t count)
205{
206 struct i2c_client *client = to_i2c_client(dev);
207 struct adm1029_data *data = i2c_get_clientdata(client);
208 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
209 long val = simple_strtol(buf, NULL, 10);
210 u8 reg;
211
212 mutex_lock(&data->update_lock);
213
214 /*Read actual config */
215 reg = i2c_smbus_read_byte_data(client,
216 ADM1029_REG_FAN_DIV[attr->index]);
217
218 switch (val) {
219 case 1:
220 val = 1;
221 break;
222 case 2:
223 val = 2;
224 break;
225 case 4:
226 val = 3;
227 break;
228 default:
229 mutex_unlock(&data->update_lock);
230 dev_err(&client->dev, "fan_div value %ld not "
231 "supported. Choose one of 1, 2 or 4!\n", val);
232 return -EINVAL;
233 }
234 /* Update the value */
235 reg = (reg & 0x3F) | (val << 6);
236
237 /* Write value */
238 i2c_smbus_write_byte_data(client,
239 ADM1029_REG_FAN_DIV[attr->index], reg);
240 mutex_unlock(&data->update_lock);
241
242 return count;
243}
244
245/*
246Access rights on sysfs, S_IRUGO stand for Is Readable by User, Group and Others
247 S_IWUSR stand for Is Writable by User
248*/
249static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
250static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
251static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
252
253static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 3);
254static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp, NULL, 4);
255static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp, NULL, 5);
256
257static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, NULL, 6);
258static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp, NULL, 7);
259static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp, NULL, 8);
260
261static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
262static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
263
264static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan, NULL, 2);
265static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan, NULL, 3);
266
267static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
268 show_fan_div, set_fan_div, 0);
269static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
270 show_fan_div, set_fan_div, 1);
271
272static struct attribute *adm1029_attributes[] = {
273 &sensor_dev_attr_temp1_input.dev_attr.attr,
274 &sensor_dev_attr_temp1_min.dev_attr.attr,
275 &sensor_dev_attr_temp1_max.dev_attr.attr,
276 &sensor_dev_attr_temp2_input.dev_attr.attr,
277 &sensor_dev_attr_temp2_min.dev_attr.attr,
278 &sensor_dev_attr_temp2_max.dev_attr.attr,
279 &sensor_dev_attr_temp3_input.dev_attr.attr,
280 &sensor_dev_attr_temp3_min.dev_attr.attr,
281 &sensor_dev_attr_temp3_max.dev_attr.attr,
282 &sensor_dev_attr_fan1_input.dev_attr.attr,
283 &sensor_dev_attr_fan2_input.dev_attr.attr,
284 &sensor_dev_attr_fan1_min.dev_attr.attr,
285 &sensor_dev_attr_fan2_min.dev_attr.attr,
286 &sensor_dev_attr_fan1_div.dev_attr.attr,
287 &sensor_dev_attr_fan2_div.dev_attr.attr,
288 NULL
289};
290
291static const struct attribute_group adm1029_group = {
292 .attrs = adm1029_attributes,
293};
294
295/*
296 * Real code
297 */
298
Jean Delvare9c97fb42008-07-16 19:30:09 +0200299/* Return 0 if detection is successful, -ENODEV otherwise */
300static int adm1029_detect(struct i2c_client *client, int kind,
301 struct i2c_board_info *info)
Corentin Labbecae2caa2007-02-14 21:15:04 +0100302{
Jean Delvare9c97fb42008-07-16 19:30:09 +0200303 struct i2c_adapter *adapter = client->adapter;
Jean Delvare52df6442009-12-09 20:35:57 +0100304 u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
Corentin Labbecae2caa2007-02-14 21:15:04 +0100305
Corentin Labbecae2caa2007-02-14 21:15:04 +0100306 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
Jean Delvare9c97fb42008-07-16 19:30:09 +0200307 return -ENODEV;
Corentin Labbecae2caa2007-02-14 21:15:04 +0100308
Corentin Labbecae2caa2007-02-14 21:15:04 +0100309 /* ADM1029 doesn't have CHIP ID, check just MAN ID
310 * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED,
311 * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values
312 * documented
313 */
314
Jean Delvare52df6442009-12-09 20:35:57 +0100315 man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
316 chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
317 temp_devices_installed = i2c_smbus_read_byte_data(client,
Corentin Labbecae2caa2007-02-14 21:15:04 +0100318 ADM1029_REG_TEMP_DEVICES_INSTALLED);
Jean Delvare52df6442009-12-09 20:35:57 +0100319 nb_fan_support = i2c_smbus_read_byte_data(client,
Corentin Labbecae2caa2007-02-14 21:15:04 +0100320 ADM1029_REG_NB_FAN_SUPPORT);
Jean Delvare52df6442009-12-09 20:35:57 +0100321 /* 0x41 is Analog Devices */
322 if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01
323 || nb_fan_support != 0x03)
324 return -ENODEV;
Corentin Labbecae2caa2007-02-14 21:15:04 +0100325
Jean Delvare52df6442009-12-09 20:35:57 +0100326 if ((chip_id & 0xF0) != 0x00) {
327 /* There are no "official" CHIP ID, so actually
328 * we use Major/Minor revision for that */
329 pr_info("adm1029: Unknown major revision %x, "
330 "please let us know\n", chip_id);
331 return -ENODEV;
Corentin Labbecae2caa2007-02-14 21:15:04 +0100332 }
Jean Delvare52df6442009-12-09 20:35:57 +0100333
Jean Delvare9c97fb42008-07-16 19:30:09 +0200334 strlcpy(info->type, "adm1029", I2C_NAME_SIZE);
Corentin Labbecae2caa2007-02-14 21:15:04 +0100335
Jean Delvare9c97fb42008-07-16 19:30:09 +0200336 return 0;
337}
338
339static int adm1029_probe(struct i2c_client *client,
340 const struct i2c_device_id *id)
341{
342 struct adm1029_data *data;
343 int err;
344
345 data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL);
346 if (!data) {
347 err = -ENOMEM;
348 goto exit;
Corentin Labbecae2caa2007-02-14 21:15:04 +0100349 }
350
Jean Delvare9c97fb42008-07-16 19:30:09 +0200351 i2c_set_clientdata(client, data);
Corentin Labbecae2caa2007-02-14 21:15:04 +0100352 mutex_init(&data->update_lock);
353
Corentin Labbecae2caa2007-02-14 21:15:04 +0100354 /*
355 * Initialize the ADM1029 chip
356 * Check config register
357 */
Jean Delvare9c97fb42008-07-16 19:30:09 +0200358 if (adm1029_init_client(client) == 0) {
359 err = -ENODEV;
360 goto exit_free;
361 }
Corentin Labbecae2caa2007-02-14 21:15:04 +0100362
363 /* Register sysfs hooks */
364 if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group)))
Jean Delvare9c97fb42008-07-16 19:30:09 +0200365 goto exit_free;
Corentin Labbecae2caa2007-02-14 21:15:04 +0100366
Tony Jones1beeffe2007-08-20 13:46:20 -0700367 data->hwmon_dev = hwmon_device_register(&client->dev);
368 if (IS_ERR(data->hwmon_dev)) {
369 err = PTR_ERR(data->hwmon_dev);
Corentin Labbecae2caa2007-02-14 21:15:04 +0100370 goto exit_remove_files;
371 }
372
373 return 0;
374
375 exit_remove_files:
376 sysfs_remove_group(&client->dev.kobj, &adm1029_group);
Corentin Labbecae2caa2007-02-14 21:15:04 +0100377 exit_free:
378 kfree(data);
379 exit:
380 return err;
381}
382
383static int adm1029_init_client(struct i2c_client *client)
384{
385 u8 config;
386 config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
387 if ((config & 0x10) == 0) {
388 i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG,
389 config | 0x10);
390 }
391 /* recheck config */
392 config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
393 if ((config & 0x10) == 0) {
394 dev_err(&client->dev, "Initialization failed!\n");
395 return 0;
396 }
397 return 1;
398}
399
Jean Delvare9c97fb42008-07-16 19:30:09 +0200400static int adm1029_remove(struct i2c_client *client)
Corentin Labbecae2caa2007-02-14 21:15:04 +0100401{
402 struct adm1029_data *data = i2c_get_clientdata(client);
Corentin Labbecae2caa2007-02-14 21:15:04 +0100403
Tony Jones1beeffe2007-08-20 13:46:20 -0700404 hwmon_device_unregister(data->hwmon_dev);
Corentin Labbecae2caa2007-02-14 21:15:04 +0100405 sysfs_remove_group(&client->dev.kobj, &adm1029_group);
406
Corentin Labbecae2caa2007-02-14 21:15:04 +0100407 kfree(data);
408 return 0;
409}
410
411/*
André Goddard Rosaaf901ca2009-11-14 13:09:05 -0200412function that update the status of the chips (temperature for example)
Corentin Labbecae2caa2007-02-14 21:15:04 +0100413*/
414static struct adm1029_data *adm1029_update_device(struct device *dev)
415{
416 struct i2c_client *client = to_i2c_client(dev);
417 struct adm1029_data *data = i2c_get_clientdata(client);
418
419 mutex_lock(&data->update_lock);
420 /*
421 * Use the "cache" Luke, don't recheck values
422 * if there are already checked not a long time later
423 */
424 if (time_after(jiffies, data->last_updated + HZ * 2)
425 || !data->valid) {
426 int nr;
427
428 dev_dbg(&client->dev, "Updating adm1029 data\n");
429
430 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) {
431 data->temp[nr] =
432 i2c_smbus_read_byte_data(client,
433 ADM1029_REG_TEMP[nr]);
434 }
435 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) {
436 data->fan[nr] =
437 i2c_smbus_read_byte_data(client,
438 ADM1029_REG_FAN[nr]);
439 }
440 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) {
441 data->fan_div[nr] =
442 i2c_smbus_read_byte_data(client,
443 ADM1029_REG_FAN_DIV[nr]);
444 }
445
446 data->last_updated = jiffies;
447 data->valid = 1;
448 }
449
450 mutex_unlock(&data->update_lock);
451
452 return data;
453}
454
455/*
456 Common module stuff
457*/
458static int __init sensors_adm1029_init(void)
459{
460
461 return i2c_add_driver(&adm1029_driver);
462}
463
464static void __exit sensors_adm1029_exit(void)
465{
466
467 i2c_del_driver(&adm1029_driver);
468}
469
470MODULE_AUTHOR("Corentin LABBE <corentin.labbe@geomatys.fr>");
471MODULE_DESCRIPTION("adm1029 driver");
472MODULE_LICENSE("GPL v2");
473
474module_init(sensors_adm1029_init);
475module_exit(sensors_adm1029_exit);