blob: 5c60be521561a5fdeed21d5bd4df5a37b5a9ee9b [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# USB Serial device configuration
3#
4
5menu "USB Serial Converter support"
6 depends on USB!=n
7
8config USB_SERIAL
9 tristate "USB Serial Converter support"
10 depends on USB
11 ---help---
12 Say Y here if you have a USB device that provides normal serial
13 ports, or acts like a serial device, and you want to connect it to
14 your USB bus.
15
16 Please read <file:Documentation/usb/usb-serial.txt> for more
17 information on the specifics of the different devices that are
18 supported, and on how to use them.
19
20 To compile this driver as a module, choose M here: the
21 module will be called usbserial.
22
23config USB_SERIAL_CONSOLE
24 bool "USB Serial Console device support (EXPERIMENTAL)"
25 depends on USB_SERIAL=y && EXPERIMENTAL
26 ---help---
27 If you say Y here, it will be possible to use a USB to serial
28 converter port as the system console (the system console is the
29 device which receives all kernel messages and warnings and which
30 allows logins in single user mode). This could be useful if some
31 terminal or printer is connected to that serial port.
32
33 Even if you say Y here, the currently visible virtual console
34 (/dev/tty0) will still be used as the system console by default, but
35 you can alter that using a kernel command line option such as
36 "console=ttyUSB0". (Try "man bootparam" or see the documentation of
37 your boot loader (lilo or loadlin) about how to pass options to the
38 kernel at boot time.)
39
40 If you don't have a VGA card installed and you say Y here, the
41 kernel will automatically use the first USB to serial converter
42 port, /dev/ttyUSB0, as system console.
43
44 If unsure, say N.
45
46config USB_SERIAL_GENERIC
47 bool "USB Generic Serial Driver"
48 depends on USB_SERIAL
49 help
50 Say Y here if you want to use the generic USB serial driver. Please
51 read <file:Documentation/usb/usb-serial.txt> for more information on
52 using this driver. It is recommended that the "USB Serial converter
53 support" be compiled as a module for this driver to be used
54 properly.
55
Greg KH3b86b202005-04-25 21:46:29 -070056config USB_SERIAL_AIRPRIME
57 tristate "USB AirPrime CDMA Wireless Driver"
58 depends on USB_SERIAL
59 help
60 Say Y here if you want to use a AirPrime CDMA Wireless PC card.
61
62 To compile this driver as a module, choose M here: the
63 module will be called airprime.
64
Greg Kroah-Hartmanbb833982005-11-17 09:48:18 -080065config USB_SERIAL_ANYDATA
66 tristate "USB AnyData CDMA Wireless Driver"
67 depends on USB_SERIAL
68 help
69 Say Y here if you want to use a AnyData CDMA device.
70
71 To compile this driver as a module, choose M here: the
72 module will be called anydata.
73
Greg Kroah-Hartman815ddc92006-05-12 11:05:29 -070074config USB_SERIAL_ARK3116
75 tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
76 depends on USB_SERIAL && EXPERIMENTAL
77 help
78 Say Y here if you want to use a ARK Micro 3116 USB to Serial
79 device.
80
81 To compile this driver as a module, choose M here: the
82 module will be called ark3116
83
Linus Torvalds1da177e2005-04-16 15:20:36 -070084config USB_SERIAL_BELKIN
85 tristate "USB Belkin and Peracom Single Port Serial Driver"
86 depends on USB_SERIAL
87 help
88 Say Y here if you want to use a Belkin USB Serial single port
89 adaptor (F5U103 is one of the model numbers) or the Peracom single
90 port USB to serial adapter.
91
92 To compile this driver as a module, choose M here: the
93 module will be called belkin_sa.
94
95config USB_SERIAL_WHITEHEAT
96 tristate "USB ConnectTech WhiteHEAT Serial Driver"
Alan Cox33f0f882006-01-09 20:54:13 -080097 depends on USB_SERIAL
Linus Torvalds1da177e2005-04-16 15:20:36 -070098 help
99 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
100 USB to serial converter device.
101
102 To compile this driver as a module, choose M here: the
103 module will be called whiteheat.
104
105config USB_SERIAL_DIGI_ACCELEPORT
106 tristate "USB Digi International AccelePort USB Serial Driver"
107 depends on USB_SERIAL
108 ---help---
109 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
110 2 port (plus parallel port) and 4 port USB serial converters. The
111 parallel port on the USB 2 appears as a third serial port on Linux.
112 The Digi Acceleport USB 8 is not yet supported by this driver.
113
114 This driver works under SMP with the usb-uhci driver. It does not
115 work under SMP with the uhci driver.
116
117 To compile this driver as a module, choose M here: the
118 module will be called digi_acceleport.
119
120config USB_SERIAL_CP2101
121 tristate "USB CP2101 UART Bridge Controller"
122 depends on USB_SERIAL && EXPERIMENTAL
123 help
124 Say Y here if you want to use a CP2101/CP2102 based USB to RS232
125 converter.
126
127 To compile this driver as a module, choose M here: the
128 module will be called cp2101.
129
130config USB_SERIAL_CYPRESS_M8
131 tristate "USB Cypress M8 USB Serial Driver"
132 depends on USB_SERIAL && EXPERIMENTAL
133 help
134 Say Y here if you want to use a device that contains the Cypress
135 USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
136
137 Attempted SMP support... send bug reports!
138
139 Supported microcontrollers in the CY4601 family are:
140 CY7C63741 CY7C63742 CY7C63743 CY7C64013
141
142 To compile this driver as a module, choose M here: the
143 module will be called cypress_m8.
144
145config USB_SERIAL_EMPEG
146 tristate "USB Empeg empeg-car Mark I/II Driver"
147 depends on USB_SERIAL
148 help
149 Say Y here if you want to connect to your Empeg empeg-car Mark I/II
150 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
151 device node. See <file:Documentation/usb/usb-serial.txt> for more
152 tidbits of information.
153
154 To compile this driver as a module, choose M here: the
155 module will be called empeg.
156
157config USB_SERIAL_FTDI_SIO
158 tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
159 depends on USB_SERIAL && EXPERIMENTAL
160 ---help---
161 Say Y here if you want to use a FTDI SIO single port USB to serial
162 converter device. The implementation I have is called the USC-1000.
163 This driver has also be tested with the 245 and 232 devices.
164
165 See <http://ftdi-usb-sio.sourceforge.net/> for more
166 information on this driver and the device.
167
168 To compile this driver as a module, choose M here: the
169 module will be called ftdi_sio.
170
Greg Kroah-Hartmanf9814802006-04-13 08:09:52 -0700171config USB_SERIAL_FUNSOFT
172 tristate "USB Fundamental Software Dongle Driver"
173 depends on USB_SERIAL
174 ---help---
175 Say Y here if you want to use the Fundamental Software dongle.
176
177 To compile this driver as a module, choose M here: the
178 module will be called funsoft.
179
Linus Torvalds1da177e2005-04-16 15:20:36 -0700180config USB_SERIAL_VISOR
181 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
182 depends on USB_SERIAL
183 help
184 Say Y here if you want to connect to your HandSpring Visor, Palm
185 m500 or m505 through its USB docking station. See
186 <http://usbvisor.sourceforge.net/> for more information on using this
187 driver.
188
189 To compile this driver as a module, choose M here: the
190 module will be called visor.
191
192config USB_SERIAL_IPAQ
193 tristate "USB PocketPC PDA Driver"
194 depends on USB_SERIAL
195 help
196 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
197 or any other PDA running Windows CE 3.0 or PocketPC 2002
198 using a USB cradle/cable. For information on using the driver,
199 read <file:Documentation/usb/usb-serial.txt>.
200
201 To compile this driver as a module, choose M here: the
202 module will be called ipaq.
203
204config USB_SERIAL_IR
205 tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
206 depends on USB_SERIAL && EXPERIMENTAL
207 help
208 Say Y here if you want to enable simple serial support for USB IrDA
209 devices. This is useful if you do not want to use the full IrDA
210 stack.
211
212 To compile this driver as a module, choose M here: the
213 module will be called ir-usb.
214
215config USB_SERIAL_EDGEPORT
216 tristate "USB Inside Out Edgeport Serial Driver"
217 depends on USB_SERIAL
218 ---help---
219 Say Y here if you want to use any of the following devices from
220 Inside Out Networks (Digi):
221 Edgeport/4
222 Rapidport/4
223 Edgeport/4t
224 Edgeport/2
225 Edgeport/4i
226 Edgeport/2i
227 Edgeport/421
228 Edgeport/21
229 Edgeport/8
230 Edgeport/8 Dual
231 Edgeport/2D8
232 Edgeport/4D8
233 Edgeport/8i
234 Edgeport/2 DIN
235 Edgeport/4 DIN
236 Edgeport/16 Dual
237
238 To compile this driver as a module, choose M here: the
239 module will be called io_edgeport.
240
241config USB_SERIAL_EDGEPORT_TI
242 tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
243 depends on USB_SERIAL
244 help
245 Say Y here if you want to use any of the devices from Inside Out
246 Networks (Digi) that are not supported by the io_edgeport driver.
247 This includes the Edgeport/1 device.
248
249 To compile this driver as a module, choose M here: the
250 module will be called io_ti.
251
252config USB_SERIAL_GARMIN
253 tristate "USB Garmin GPS driver"
254 depends on USB_SERIAL
255 help
256 Say Y here if you want to connect to your Garmin GPS.
257 Should work with most Garmin GPS devices which have a native USB port.
258
259 See <http://sourceforge.net/projects/garmin-gps> for the latest
260 version of the driver.
261
262 To compile this driver as a module, choose M here: the
263 module will be called garmin_gps.
264
265config USB_SERIAL_IPW
266 tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)"
267 depends on USB_SERIAL && EXPERIMENTAL
268 help
269 Say Y here if you want to use a IPWireless USB modem such as
270 the ones supplied by Axity3G/Sentech South Africa.
271
272 To compile this driver as a module, choose M here: the
273 module will be called ipw.
274
275config USB_SERIAL_KEYSPAN_PDA
276 tristate "USB Keyspan PDA Single Port Serial Driver"
277 depends on USB_SERIAL
278 help
279 Say Y here if you want to use a Keyspan PDA single port USB to
280 serial converter device. This driver makes use of firmware
281 developed from scratch by Brian Warner.
282
283 To compile this driver as a module, choose M here: the
284 module will be called keyspan_pda.
285
286config USB_SERIAL_KEYSPAN
287 tristate "USB Keyspan USA-xxx Serial Driver"
288 depends on USB_SERIAL
289 ---help---
290 Say Y here if you want to use Keyspan USB to serial converter
291 devices. This driver makes use of Keyspan's official firmware
292 and was developed with their support. You must also include
293 firmware to support your particular device(s).
294
295 See <http://misc.nu/hugh/keyspan.html> for more information.
296
297 To compile this driver as a module, choose M here: the
298 module will be called keyspan.
299
300config USB_SERIAL_KEYSPAN_MPR
301 bool "USB Keyspan MPR Firmware"
302 depends on USB_SERIAL_KEYSPAN
303 help
304 Say Y here to include firmware for the Keyspan MPR converter.
305
306config USB_SERIAL_KEYSPAN_USA28
307 bool "USB Keyspan USA-28 Firmware"
308 depends on USB_SERIAL_KEYSPAN
309 help
310 Say Y here to include firmware for the USA-28 converter.
311
312config USB_SERIAL_KEYSPAN_USA28X
313 bool "USB Keyspan USA-28X Firmware"
314 depends on USB_SERIAL_KEYSPAN
315 help
316 Say Y here to include firmware for the USA-28X converter.
317 Be sure you have a USA-28X, there are also 28XA and 28XB
318 models, the label underneath has the actual part number.
319
320config USB_SERIAL_KEYSPAN_USA28XA
321 bool "USB Keyspan USA-28XA Firmware"
322 depends on USB_SERIAL_KEYSPAN
323 help
324 Say Y here to include firmware for the USA-28XA converter.
325 Be sure you have a USA-28XA, there are also 28X and 28XB
326 models, the label underneath has the actual part number.
327
328config USB_SERIAL_KEYSPAN_USA28XB
329 bool "USB Keyspan USA-28XB Firmware"
330 depends on USB_SERIAL_KEYSPAN
331 help
332 Say Y here to include firmware for the USA-28XB converter.
333 Be sure you have a USA-28XB, there are also 28X and 28XA
334 models, the label underneath has the actual part number.
335
336config USB_SERIAL_KEYSPAN_USA19
337 bool "USB Keyspan USA-19 Firmware"
338 depends on USB_SERIAL_KEYSPAN
339 help
340 Say Y here to include firmware for the USA-19 converter.
341
342config USB_SERIAL_KEYSPAN_USA18X
343 bool "USB Keyspan USA-18X Firmware"
344 depends on USB_SERIAL_KEYSPAN
345 help
346 Say Y here to include firmware for the USA-18X converter.
347
348config USB_SERIAL_KEYSPAN_USA19W
349 bool "USB Keyspan USA-19W Firmware"
350 depends on USB_SERIAL_KEYSPAN
351 help
352 Say Y here to include firmware for the USA-19W converter.
353
354config USB_SERIAL_KEYSPAN_USA19QW
355 bool "USB Keyspan USA-19QW Firmware"
356 depends on USB_SERIAL_KEYSPAN
357 help
358 Say Y here to include firmware for the USA-19QW converter.
359
360config USB_SERIAL_KEYSPAN_USA19QI
361 bool "USB Keyspan USA-19QI Firmware"
362 depends on USB_SERIAL_KEYSPAN
363 help
364 Say Y here to include firmware for the USA-19QI converter.
365
366config USB_SERIAL_KEYSPAN_USA49W
367 bool "USB Keyspan USA-49W Firmware"
368 depends on USB_SERIAL_KEYSPAN
369 help
370 Say Y here to include firmware for the USA-49W converter.
371
372config USB_SERIAL_KEYSPAN_USA49WLC
373 bool "USB Keyspan USA-49WLC Firmware"
374 depends on USB_SERIAL_KEYSPAN
375 help
376 Say Y here to include firmware for the USA-49WLC converter.
377
378config USB_SERIAL_KLSI
379 tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
380 depends on USB_SERIAL && EXPERIMENTAL
381 ---help---
382 Say Y here if you want to use a KL5KUSB105 - based single port
383 serial adapter. The most widely known -- and currently the only
384 tested -- device in this category is the PalmConnect USB Serial
385 adapter sold by Palm Inc. for use with their Palm III and Palm V
386 series PDAs.
387
388 Please read <file:Documentation/usb/usb-serial.txt> for more
389 information.
390
391 To compile this driver as a module, choose M here: the
392 module will be called kl5kusb105.
393
394config USB_SERIAL_KOBIL_SCT
395 tristate "USB KOBIL chipcard reader"
396 depends on USB_SERIAL
397 ---help---
398 Say Y here if you want to use one of the following KOBIL USB chipcard
399 readers:
400
401 - USB TWIN
402 - KAAN Standard Plus
403 - KAAN SIM
404 - SecOVID Reader Plus
405 - B1 Professional
406 - KAAN Professional
407
408 Note that you need a current CT-API.
409 To compile this driver as a module, choose M here: the
410 module will be called kobil_sct.
411
412config USB_SERIAL_MCT_U232
413 tristate "USB MCT Single Port Serial Driver"
414 depends on USB_SERIAL
415 ---help---
416 Say Y here if you want to use a USB Serial single port adapter from
417 Magic Control Technology Corp. (U232 is one of the model numbers).
418
419 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
420 BAY devices.
421
422 To compile this driver as a module, choose M here: the
423 module will be called mct_u232.
424
Greg Kroah-Hartmane9a66c62006-03-17 17:40:08 -0800425config USB_SERIAL_NAVMAN
426 tristate "USB Navman GPS device"
427 depends on USB_SERIAL
428 help
429 To compile this driver as a module, choose M here: the
430 module will be called navman.
431
Linus Torvalds1da177e2005-04-16 15:20:36 -0700432config USB_SERIAL_PL2303
433 tristate "USB Prolific 2303 Single Port Serial Driver"
434 depends on USB_SERIAL
435 help
436 Say Y here if you want to use the PL2303 USB Serial single port
437 adapter from Prolific.
438
439 To compile this driver as a module, choose M here: the
440 module will be called pl2303.
441
Arthur Huillet36045fb2005-04-22 15:06:59 -0700442config USB_SERIAL_HP4X
443 tristate "USB HP4x Calculators support"
444 depends on USB_SERIAL
445 help
446 Say Y here if you want to use an Hewlett-Packard 4x Calculator.
447
448 To compile this driver as a module, choose M here: the
449 module will be called hp4x.
450
Linus Torvalds1da177e2005-04-16 15:20:36 -0700451config USB_SERIAL_SAFE
452 tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
453 depends on USB_SERIAL && EXPERIMENTAL
454
455config USB_SERIAL_SAFE_PADDED
456 bool "USB Secure Encapsulated Driver - Padded"
457 depends on USB_SERIAL_SAFE
458
459config USB_SERIAL_TI
460 tristate "USB TI 3410/5052 Serial Driver"
461 depends on USB_SERIAL
462 help
463 Say Y here if you want to use the TI USB 3410 or 5052
464 serial devices.
465
466 To compile this driver as a module, choose M here: the
467 module will be called ti_usb_3410_5052.
468
469config USB_SERIAL_CYBERJACK
470 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
471 depends on USB_SERIAL && EXPERIMENTAL
472 ---help---
473 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
474 reader. This is an interface to ISO 7816 compatible contactbased
475 chipcards, e.g. GSM SIMs.
476
477 To compile this driver as a module, choose M here: the
478 module will be called cyberjack.
479
480 If unsure, say N.
481
482config USB_SERIAL_XIRCOM
483 tristate "USB Xircom / Entregra Single Port Serial Driver"
484 depends on USB_SERIAL
485 help
486 Say Y here if you want to use a Xircom or Entregra single port USB to
487 serial converter device. This driver makes use of firmware
488 developed from scratch by Brian Warner.
489
490 To compile this driver as a module, choose M here: the
491 module will be called keyspan_pda.
492
Matthias Urlichs58cfe912005-05-23 17:00:48 -0700493config USB_SERIAL_OPTION
494 tristate "USB Option PCMCIA serial driver"
495 depends on USB_SERIAL && USB_OHCI_HCD && PCCARD
496 help
497 Say Y here if you want to use an Option card. This is a
498 GSM card, controlled by three serial ports which are connected
499 via an OHCI adapter located on a PC card.
500
501 To compile this driver as a module, choose M here: the
502 module will be called option.
503
Linus Torvalds1da177e2005-04-16 15:20:36 -0700504config USB_SERIAL_OMNINET
505 tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
506 depends on USB_SERIAL && EXPERIMENTAL
507 help
508 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
509
510 To compile this driver as a module, choose M here: the
511 module will be called omninet.
512
513config USB_EZUSB
514 bool
515 depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
516 default y
517
518endmenu
519