blob: 6faad7e6417c89e82e761928393c9907410c5e0f [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001Sat Jan 18 15:51:45 1997 Richard Henderson <rth@tamu.edu>
2
3 * Don't play with usage_count directly, instead hand around
4 the module header and use the module macros.
5
6Fri May 17 00:00:00 1996 Leonard N. Zubkoff <lnz@dandelion.com>
7
8 * BusLogic Driver Version 2.0.3 Released.
9
10Tue Apr 16 21:00:00 1996 Leonard N. Zubkoff <lnz@dandelion.com>
11
12 * BusLogic Driver Version 1.3.2 Released.
13
14Sun Dec 31 23:26:00 1995 Leonard N. Zubkoff <lnz@dandelion.com>
15
16 * BusLogic Driver Version 1.3.1 Released.
17
18Fri Nov 10 15:29:49 1995 Leonard N. Zubkoff <lnz@dandelion.com>
19
20 * Released new BusLogic driver.
21
22Wed Aug 9 22:37:04 1995 Andries Brouwer <aeb@cwi.nl>
23
24 As a preparation for new device code, separated the various
25 functions the request->dev field had into the device proper,
26 request->rq_dev and a status field request->rq_status.
27
28 The 2nd argument of bios_param is now a kdev_t.
29
30Wed Jul 19 10:43:15 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
31
32 * scsi.c (scsi_proc_info): /proc/scsi/scsi now also lists all
33 attached devices.
34
35 * scsi_proc.c (proc_print_scsidevice): Added. Used by scsi.c and
36 eata_dma_proc.c to produce some device info for /proc/scsi.
37
38 * eata_dma.c (eata_queue)(eata_int_handler)(eata_scsi_done):
39 Changed handling of internal SCSI commands send to the HBA.
40
41
42Wed Jul 19 10:09:17 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
43
44 * Linux 1.3.11 released.
45
46 * eata_dma.c (eata_queue)(eata_int_handler): Added code to do
47 command latency measurements if requested by root through
48 /proc/scsi interface.
49 Throughout Use HZ constant for time references.
50
51 * eata_pio.c: Use HZ constant for time references.
52
53 * aic7xxx.c, aic7xxx.h, aic7xxx_asm.c: Changed copyright from BSD
54 to GNU style.
55
56 * scsi.h: Added READ_12 command opcode constant
57
58Wed Jul 19 09:25:30 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
59
60 * Linux 1.3.10 released.
61
62 * scsi_proc.c (dispatch_scsi_info): Removed unused variable.
63
64Wed Jul 19 09:25:30 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
65
66 * Linux 1.3.9 released.
67
68 * scsi.c Blacklist concept expanded to 'support' more device
69 deficiencies. blacklist[] renamed to device_list[]
70 (scan_scsis): Code cleanup.
71
72 * scsi_debug.c (scsi_debug_proc_info): Added support to control
73 device lockup simulation via /proc/scsi interface.
74
75
76Wed Jul 19 09:22:34 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
77
78 * Linux 1.3.7 released.
79
80 * scsi_proc.c: Fixed a number of bugs in directory handling
81
82Wed Jul 19 09:18:28 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
83
84 * Linux 1.3.5 released.
85
86 * Native wide, multichannel and /proc/scsi support now in official
87 kernel distribution.
88
89 * scsi.c/h, hosts.c/h et al reindented to increase readability
90 (especially on 80 column wide terminals).
91
92 * scsi.c, scsi_proc.c, ../../fs/proc/inode.c: Added
93 /proc/scsi/scsi which allows root to scan for hotplugged devices.
94
95 * scsi.c (scsi_proc_info): Added, to support /proc/scsi/scsi.
96 (scan_scsis): Added some 'spaghetti' code to allow scanning for
97 single devices.
98
99
100Thu Jun 20 15:20:27 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
101
102 * proc.c: Renamed to scsi_proc.c
103
104Mon Jun 12 20:32:45 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
105
106 * Linux 1.3.0 released.
107
108Mon May 15 19:33:14 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
109
110 * scsi.c: Added native multichannel and wide scsi support.
111
112 * proc.c (dispatch_scsi_info) (build_proc_dir_hba_entries):
113 Updated /proc/scsi interface.
114
115Thu May 4 17:58:48 1995 Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
116
117 * sd.c (requeue_sd_request): Zero out the scatterlist only if
118 scsi_malloc returned memory for it.
119
120 * eata_dma.c (register_HBA) (eata_queue): Add support for
121 large scatter/gather tables and set use_clustering accordingly
122
123 * hosts.c: Make use_clustering changeable in the Scsi_Host structure.
124
125Wed Apr 12 15:25:52 1995 Eric Youngdale (eric@andante)
126
127 * Linux 1.2.5 released.
128
129 * buslogic.c: Update to version 1.15 (From Leonard N. Zubkoff).
130 Fixed interrupt routine to avoid races when handling multiple
131 complete commands per interrupt. Seems to come up with faster
132 cards.
133
134 * eata_dma.c: Update to 2.3.5r. Modularize. Improved error handling
135 throughout and fixed bug interrupt routine which resulted in shifted
136 status bytes. Added blink LED state checks for ISA and EISA HBAs.
137 Memory management bug seems to have disappeared ==> increasing
138 C_P_L_CURRENT_MAX to 16 for now. Decreasing C_P_L_DIV to 3 for
139 performance reasons.
140
141 * scsi.c: If we get a FMK, EOM, or ILI when attempting to scan
142 the bus, assume that it was just noise on the bus, and ignore
143 the device.
144
145 * scsi.h: Update and add a bunch of missing commands which we
146 were never using.
147
148 * sd.c: Use restore_flags in do_sd_request - this may result in
149 latency conditions, but it gets rid of races and crashes.
150 Do not save flags again when searching for a second command to
151 queue.
152
153 * st.c: Use bytes, not STP->buffer->buffer_size when reading
154 from tape.
155
156
157Tue Apr 4 09:42:08 1995 Eric Youngdale (eric@andante)
158
159 * Linux 1.2.4 released.
160
161 * st.c: Fix typo - restoring wrong flags.
162
163Wed Mar 29 06:55:12 1995 Eric Youngdale (eric@andante)
164
165 * Linux 1.2.3 released.
166
167 * st.c: Perform some waiting operations with interrupts off.
168 Is this correct???
169
170Wed Mar 22 10:34:26 1995 Eric Youngdale (eric@andante)
171
172 * Linux 1.2.2 released.
173
174 * aha152x.c: Modularize. Add support for PCMCIA.
175
176 * eata.c: Update to version 2.0. Fixed bug preventing media
177 detection. If scsi_register_host returns NULL, fail gracefully.
178
179 * scsi.c: Detect as NEC (for photo-cd purposes) for the 84
180 and 25 models as "NEC_OLDCDR".
181
182 * scsi.h: Add define for NEC_OLDCDR
183
184 * sr.c: Add handling for NEC_OLDCDR. Treat as unknown.
185
186 * u14-34f.c: Update to version 2.0. Fixed same bug as in
187 eata.c.
188
189
190Mon Mar 6 11:11:20 1995 Eric Youngdale (eric@andante)
191
192 * Linux 1.2.0 released. Yeah!!!
193
194 * Minor spelling/punctuation changes throughout. Nothing
195 substantive.
196
197Mon Feb 20 21:33:03 1995 Eric Youngdale (eric@andante)
198
199 * Linux 1.1.95 released.
200
201 * qlogic.c: Update to version 0.41.
202
203 * seagate.c: Change some message to be more descriptive about what
204 we detected.
205
206 * sr.c: spelling/whitespace changes.
207
208Mon Feb 20 21:33:03 1995 Eric Youngdale (eric@andante)
209
210 * Linux 1.1.94 released.
211
212Mon Feb 20 08:57:17 1995 Eric Youngdale (eric@andante)
213
214 * Linux 1.1.93 released.
215
216 * hosts.h: Change io_port to long int from short.
217
218 * 53c7,8xx.c: crash on AEN fixed, SCSI reset is no longer a NOP,
219 NULL pointer panic on odd UDCs fixed, two bugs in diagnostic output
220 fixed, should initialize correctly if left running, now loadable,
221 new memory allocation, extraneous diagnostic output suppressed,
222 splx() replaced with save/restore flags. [ Drew ]
223
224 * hosts.c, hosts.h, scsi_ioctl.c, sd.c, sd_ioctl.c, sg.c, sr.c,
225 sr_ioctl.c: Add special junk at end that Emacs will use for
226 formatting the file.
227
228 * qlogic.c: Update to v0.40a. Improve parity handling.
229
230 * scsi.c: Add Hitachi DK312C to blacklist. Change "};" to "}" in
231 many places. Use scsi_init_malloc to get command block - may
232 need this to be dma compatible for some host adapters.
233 Restore interrupts after unregistering a host.
234
235 * sd.c: Use sti instead of restore flags - causes latency problems.
236
237 * seagate.c: Use controller_type to determine string used when
238 registering irq.
239
240 * sr.c: More photo-cd hacks to make sure we get the xa stuff right.
241 * sr.h, sr.c: Change is_xa to xa_flags field.
242
243 * st.c: Disable retries for write operations.
244
245Wed Feb 15 10:52:56 1995 Eric Youngdale (eric@andante)
246
247 * Linux 1.1.92 released.
248
249 * eata.c: Update to 1.17.
250
251 * eata_dma.c: Update to 2.31a. Add more support for /proc/scsi.
252 Continuing modularization. Less crashes because of the bug in the
253 memory management ==> increase C_P_L_CURRENT_MAX to 10
254 and decrease C_P_L_DIV to 4.
255
256 * hosts.c: If we remove last host registered, reuse host number.
257 When freeing memory from host being deregistered, free extra_bytes
258 too.
259
260 * scsi.c (scan_scsis): memset(SDpnt, 0) and set SCmd.device to SDpnt.
261 Change memory allocation to work around bugs in __get_dma_pages.
262 Do not free host if usage count is not zero (for modules).
263
264 * sr_ioctl.c: Increase IOCTL_TIMEOUT to 3000.
265
266 * st.c: Allow for ST_EXTRA_DEVS in st data structures.
267
268 * u14-34f.c: Update to 1.17.
269
270Thu Feb 9 10:11:16 1995 Eric Youngdale (eric@andante)
271
272 * Linux 1.1.91 released.
273
274 * eata.c: Update to 1.16. Use wish_block instead of host->block.
275
276 * hosts.c: Initialize wish_block to 0.
277
278 * hosts.h: Add wish_block.
279
280 * scsi.c: Use wish_block as indicator that the host should be added
281 to block list.
282
283 * sg.c: Add SG_EXTRA_DEVS to number of slots.
284
285 * u14-34f.c: Use wish_block.
286
287Tue Feb 7 11:46:04 1995 Eric Youngdale (eric@andante)
288
289 * Linux 1.1.90 released.
290
291 * eata.c: Change naming from eata_* to eata2x_*. Now at vers 1.15.
292 Update interrupt handler to take pt_regs as arg. Allow blocking
293 even if loaded as module. Initialize target_time_out array.
294 Do not put sti(); in timing loop.
295
296 * hosts.c: Do not reuse host numbers.
297 Use scsi_make_blocked_list to generate blocking list.
298
299 * script_asm.pl: Beats me. Don't know perl. Something to do with
300 phase index.
301
302 * scsi.c (scsi_make_blocked_list): New function - code copied from
303 hosts.c.
304
305 * scsi.c: Update code to disable photo CD for Toshiba cdroms.
306 Use just manufacturer name, not model number.
307
308 * sr.c: Fix setting density for Toshiba drives.
309
310 * u14-34f.c: Clear target_time_out array during reset.
311
312Wed Feb 1 09:20:45 1995 Eric Youngdale (eric@andante)
313
314 * Linux 1.1.89 released.
315
316 * Makefile, u14-34f.c: Modularize.
317
318 * Makefile, eata.c: Modularize. Now version 1.14
319
320 * NCR5380.c: Update interrupt handler with new arglist. Minor
321 cleanups.
322
323 * eata_dma.c: Begin to modularize. Add hooks for /proc/scsi.
324 New version 2.3.0a. Add code in interrupt handler to allow
325 certain CDROM drivers to be detected which return a
326 CHECK_CONDITION during SCSI bus scan. Add opcode check to get
327 all DATA IN and DATA OUT phases right. Utilize HBA_interpret flag.
328 Improvements in HBA identification. Various other minor stuff.
329
330 * hosts.c: Initialize ->dma_channel and ->io_port when registering
331 a new host.
332
333 * qlogic.c: Modularize and add PCMCIA support.
334
335 * scsi.c: Add Hitachi to blacklist.
336
337 * scsi.c: Change default to no lun scan (too many problem devices).
338
339 * scsi.h: Define QUEUE_FULL condition.
340
341 * sd.c: Do not check for non-existent partition until after
342 new media check.
343
344 * sg.c: Undo previous change which was wrong.
345
346 * sr_ioctl.c: Increase IOCTL_TIMEOUT to 2000.
347
348 * st.c: Patches from Kai - improve filemark handling.
349
350Tue Jan 31 17:32:12 1995 Eric Youngdale (eric@andante)
351
352 * Linux 1.1.88 released.
353
354 * Throughout - spelling/grammar fixups.
355
356 * scsi.c: Make sure that all buffers are 16 byte aligned - some
357 drivers (buslogic) need this.
358
359 * scsi.c (scan_scsis): Remove message printed.
360
361 * scsi.c (scsi_init): Move message here.
362
363Mon Jan 30 06:40:25 1995 Eric Youngdale (eric@andante)
364
365 * Linux 1.1.87 released.
366
367 * sr.c: Photo-cd related changes. (Gerd Knorr??).
368
369 * st.c: Changes from Kai related to EOM detection.
370
371Mon Jan 23 23:53:10 1995 Eric Youngdale (eric@andante)
372
373 * Linux 1.1.86 released.
374
375 * 53c7,8xx.h: Change SG size to 127.
376
377 * eata_dma: Update to version 2.10i. Remove bug in the registration
378 of multiple HBAs and channels. Minor other improvements and stylistic
379 changes.
380
381 * scsi.c: Test for Toshiba XM-3401TA and exclude from detection
382 as toshiba drive - photo cd does not work with this drive.
383
384 * sr.c: Update photocd code.
385
386Mon Jan 23 23:53:10 1995 Eric Youngdale (eric@andante)
387
388 * Linux 1.1.85 released.
389
390 * st.c, st_ioctl.c, sg.c, sd_ioctl.c, scsi_ioctl.c, hosts.c:
391 include linux/mm.h
392
393 * qlogic.c, buslogic.c, aha1542.c: Include linux/module.h.
394
395Sun Jan 22 22:08:46 1995 Eric Youngdale (eric@andante)
396
397 * Linux 1.1.84 released.
398
399 * Makefile: Support for loadable QLOGIC boards.
400
401 * aha152x.c: Update to version 1.8 from Juergen.
402
403 * eata_dma.c: Update from Michael Neuffer.
404 Remove hard limit of 2 commands per lun and make it better
405 configurable. Improvements in HBA identification.
406
407 * in2000.c: Fix biosparam to support large disks.
408
409 * qlogic.c: Minor changes (change sti -> restore_flags).
410
411Wed Jan 18 23:33:09 1995 Eric Youngdale (eric@andante)
412
413 * Linux 1.1.83 released.
414
415 * aha1542.c(aha1542_intr_handle): Use arguments handed down to find
416 which irq.
417
418 * buslogic.c: Likewise.
419
420 * eata_dma.c: Use min of 2 cmd_per_lun for OCS_enabled boards.
421
422 * scsi.c: Make RECOVERED_ERROR a SUGGEST_IS_OK.
423
424 * sd.c: Fail if we are opening a non-existent partition.
425
426 * sr.c: Bump SR_TIMEOUT to 15000.
427 Do not probe for media size at boot time(hard on changers).
428 Flag device as needing sector size instead.
429
430 * sr_ioctl.c: Remove CDROMMULTISESSION_SYS ioctl.
431
432 * ultrastor.c: Fix bug in call to ultrastor_interrupt (wrong #args).
433
434Mon Jan 16 07:18:23 1995 Eric Youngdale (eric@andante)
435
436 * Linux 1.1.82 released.
437
438 Throughout.
439 - Change all interrupt handlers to accept new calling convention.
440 In particular, we now receive the irq number as one of the arguments.
441
442 * More minor spelling corrections in some of the new files.
443
444 * aha1542.c, buslogic.c: Clean up interrupt handler a little now
445 that we receive the irq as an arg.
446
447 * aha274x.c: s/snarf_region/request_region/
448
449 * eata.c: Update to version 1.12. Fix some comments and display a
450 message if we cannot reserve the port addresses.
451
452 * u14-34f.c: Update to version 1.13. Fix some comments and display a
453 message if we cannot reserve the port addresses.
454
455 * eata_dma.c: Define get_board_data function (send INQUIRY command).
456 Use to improve detection of variants of different DPT boards. Change
457 version subnumber to "0g".
458
459 * fdomain.c: Update to version 5.26. Improve detection of some boards
460 repackaged by IBM.
461
462 * scsi.c (scsi_register_host): Change "name" to const char *.
463
464 * sr.c: Fix problem in set mode command for Toshiba drives.
465
466 * sr.c: Fix typo from patch 81.
467
468Fri Jan 13 12:54:46 1995 Eric Youngdale (eric@andante)
469
470 * Linux 1.1.81 released. Codefreeze for 1.2 release announced.
471
472 Big changes here.
473
474 * eata_dma.*: New files from Michael Neuffer.
475 (neuffer@goofy.zdv.uni-mainz.de). Should support
476 all eata/dpt cards.
477
478 * hosts.c, Makefile: Add eata_dma.
479
480 * README.st: Document MTEOM.
481
482 Patches from me (ERY) to finish support for low-level loadable scsi.
483 It now works, and is actually useful.
484
485 * Throughout - add new argument to scsi_init_malloc that takes an
486 additional parameter. This is used as a priority to kmalloc,
487 and you can specify the GFP_DMA flag if you need DMA-able memory.
488
489 * Makefile: For source files that are loadable, always add name
490 to SCSI_SRCS. Fill in modules: target.
491
492 * hosts.c: Change next_host to next_scsi_host, and make global.
493 Print hosts after we have identified all of them. Use info()
494 function if present, otherwise use name field.
495
496 * hosts.h: Change attach function to return int, not void.
497 Define number of device slots to allow for loadable devices.
498 Define tags to tell scsi module code what type of module we
499 are loading.
500
501 * scsi.c: Fix scan_scsis so that it can be run by a user process.
502 Do not use waiting loops - use up and down mechanism as long
503 as current != task[0].
504
505 * scsi.c(scan_scsis): Do not use stack variables for I/O - this
506 could be > 16Mb if we are loading a module at runtime (i.e. use
507 scsi_init_malloc to get some memory we know will be safe).
508
509 * scsi.c: Change dma freelist to be a set of pages. This allows
510 us to dynamically adjust the size of the list by adding more pages
511 to the pagelist. Fix scsi_malloc and scsi_free accordingly.
512
513 * scsi_module.c: Fix include.
514
515 * sd.c: Declare detach function. Increment/decrement module usage
516 count as required. Fix init functions to allow loaded devices.
517 Revalidate all new disks so we get the partition tables. Define
518 detach function.
519
520 * sr.c: Likewise.
521
522 * sg.c: Declare detach function. Allow attachment of devices on
523 loaded drivers.
524
525 * st.c: Declare detach function. Increment/decrement module usage
526 count as required.
527
528Tue Jan 10 10:09:58 1995 Eric Youngdale (eric@andante)
529
530 * Linux 1.1.79 released.
531
532 Patch from some undetermined individual who needs to get a life :-).
533
534 * sr.c: Attacked by spelling bee...
535
536 Patches from Gerd Knorr:
537
538 * sr.c: make printk messages for photoCD a little more informative.
539
540 * sr_ioctl.c: Fix CDROMMULTISESSION_SYS ioctl.
541
542Mon Jan 9 10:01:37 1995 Eric Youngdale (eric@andante)
543
544 * Linux 1.1.78 released.
545
546 * Makefile: Add empty modules: target.
547
548 * Wheee. Now change register_iomem to request_region.
549
550 * in2000.c: Bugfix - apparently this is the fix that we have
551 all been waiting for. It fixes a problem whereby the driver
552 is not stable under heavy load. Race condition and all that.
553 Patch from Peter Lu.
554
555Wed Jan 4 21:17:40 1995 Eric Youngdale (eric@andante)
556
557 * Linux 1.1.77 released.
558
559 * 53c7,8xx.c: Fix from Linus - emulate splx.
560
561 Throughout:
562
563 Change "snarf_region" with "register_iomem".
564
565 * scsi_module.c: New file. Contains support for low-level loadable
566 scsi drivers. [ERY].
567
568 * sd.c: More s/int/long/ changes.
569
570 * seagate.c: Explicitly include linux/config.h
571
572 * sg.c: Increment/decrement module usage count on open/close.
573
574 * sg.c: Be a bit more careful about the user not supplying enough
575 information for a valid command. Pass correct size down to
576 scsi_do_cmd.
577
578 * sr.c: More changes for Photo-CD. This apparently breaks NEC drives.
579
580 * sr_ioctl.c: Support CDROMMULTISESSION ioctl.
581
582
583Sun Jan 1 19:55:21 1995 Eric Youngdale (eric@andante)
584
585 * Linux 1.1.76 released.
586
587 * constants.c: Add type cast in switch statement.
588
589 * scsi.c (scsi_free): Change datatype of "offset" to long.
590 (scsi_malloc): Change a few more variables to long. Who
591 did this and why was it important? 64 bit machines?
592
593
594 Lots of changes to use save_state/restore_state instead of cli/sti.
595 Files changed include:
596
597 * aha1542.c:
598 * aha1740.c:
599 * buslogic.c:
600 * in2000.c:
601 * scsi.c:
602 * scsi_debug.c:
603 * sd.c:
604 * sr.c:
605 * st.c:
606
607Wed Dec 28 16:38:29 1994 Eric Youngdale (eric@andante)
608
609 * Linux 1.1.75 released.
610
611 * buslogic.c: Spelling fix.
612
613 * scsi.c: Add HP C1790A and C2500A scanjet to blacklist.
614
615 * scsi.c: Spelling fixup.
616
617 * sd.c: Add support for sd_hardsizes (hard sector sizes).
618
619 * ultrastor.c: Use save_flags/restore_flags instead of cli/sti.
620
621Fri Dec 23 13:36:25 1994 Eric Youngdale (eric@andante)
622
623 * Linux 1.1.74 released.
624
625 * README.st: Update from Kai Makisara.
626
627 * eata.c: New version from Dario - version 1.11.
628 use scsicam bios_param routine. Add support for 2011
629 and 2021 boards.
630
631 * hosts.c: Add support for blocking. Linked list automatically
632 generated when shpnt->block is set.
633
634 * scsi.c: Add sankyo & HP scanjet to blacklist. Add support for
635 kicking things loose when we deadlock.
636
637 * scsi.c: Recognize scanners and processors in scan_scsis.
638
639 * scsi_ioctl.h: Increase timeout to 9 seconds.
640
641 * st.c: New version from Kai - add better support for backspace.
642
643 * u14-34f.c: New version from Dario. Supports blocking.
644
645Wed Dec 14 14:46:30 1994 Eric Youngdale (eric@andante)
646
647 * Linux 1.1.73 released.
648
649 * buslogic.c: Update from Dave Gentzel. Version 1.14.
650 Add module related stuff. More fault tolerant if out of
651 DMA memory.
652
653 * fdomain.c: New version from Rik Faith - version 5.22. Add support
654 for ISA-200S SCSI adapter.
655
656 * hosts.c: Spelling.
657
658 * qlogic.c: Update to version 0.38a. Add more support for PCMCIA.
659
660 * scsi.c: Mask device type with 0x1f during scan_scsis.
661 Add support for deadlocking, err, make that getting out of
662 deadlock situations that are created when we allow the user
663 to limit requests to one host adapter at a time.
664
665 * scsi.c: Bugfix - pass pid, not SCpnt as second arg to
666 scsi_times_out.
667
668 * scsi.c: Restore interrupt state to previous value instead of using
669 cli/sti pairs.
670
671 * scsi.c: Add a bunch of module stuff (all commented out for now).
672
673 * scsi.c: Clean up scsi_dump_status.
674
675Tue Dec 6 12:34:20 1994 Eric Youngdale (eric@andante)
676
677 * Linux 1.1.72 released.
678
679 * sg.c: Bugfix - always use sg_free, since we might have big buff.
680
681Fri Dec 2 11:24:53 1994 Eric Youngdale (eric@andante)
682
683 * Linux 1.1.71 released.
684
685 * sg.c: Clear buff field when not in use. Only call scsi_free if
686 non-null.
687
688 * scsi.h: Call wake_up(&wait_for_request) when done with a
689 command.
690
691 * scsi.c (scsi_times_out): Pass pid down so that we can protect
692 against race conditions.
693
694 * scsi.c (scsi_abort): Zero timeout field if we get the
695 NOT_RUNNING message back from low-level driver.
696
697
698 * scsi.c (scsi_done): Restore cmd_len, use_sg here.
699
700 * scsi.c (request_sense): Not here.
701
702 * hosts.h: Add new forbidden_addr, forbidden_size fields. Who
703 added these and why????
704
705 * hosts.c (scsi_mem_init): Mark pages as reserved if they fall in
706 the forbidden regions. I am not sure - I think this is so that
707 we can deal with boards that do incomplete decoding of their
708 address lines for the bios chips, but I am not entirely sure.
709
710 * buslogic.c: Set forbidden_addr stuff if using a buggy board.
711
712 * aha1740.c: Test for NULL pointer in SCtmp. This should not
713 occur, but a nice message is better than a kernel segfault.
714
715 * 53c7,8xx.c: Add new PCI chip ID for 815.
716
717Fri Dec 2 11:24:53 1994 Eric Youngdale (eric@andante)
718
719 * Linux 1.1.70 released.
720
721 * ChangeLog, st.c: Spelling.
722
723Tue Nov 29 18:48:42 1994 Eric Youngdale (eric@andante)
724
725 * Linux 1.1.69 released.
726
727 * u14-34f.h: Non-functional change. [Dario].
728
729 * u14-34f.c: Use block field in Scsi_Host to prevent commands from
730 being queued to more than one host at the same time (used when
731 motherboard does not deal with multiple bus-masters very well).
732 Only when SINGLE_HOST_OPERATIONS is defined.
733 Use new cmd_per_lun field. [Dario]
734
735 * eata.c: Likewise.
736
737 * st.c: More changes from Kai. Add ready flag to indicate drive
738 status.
739
740 * README.st: Document this.
741
742 * sr.c: Bugfix (do not subtract CD_BLOCK_OFFSET) for photo-cd
743 code.
744
745 * sg.c: Bugfix - fix problem where opcode is not correctly set up.
746
747 * seagate.[c,h]: Use #defines to set driver name.
748
749 * scsi_ioctl.c: Zero buffer before executing command.
750
751 * scsi.c: Use new cmd_per_lun field in Scsi_Hosts as appropriate.
752 Add Sony CDU55S to blacklist.
753
754 * hosts.h: Add new cmd_per_lun field to Scsi_Hosts.
755
756 * hosts.c: Initialize cmd_per_lun in Scsi_Hosts from template.
757
758 * buslogic.c: Use cmd_per_lun field - initialize to different
759 values depending upon bus type (i.e. use 1 if ISA, so we do not
760 hog memory). Use other patches which got lost from 1.1.68.
761
762 * aha1542.c: Spelling.
763
764Tue Nov 29 15:43:50 1994 Eric Youngdale (eric@andante.aib.com)
765
766 * Linux 1.1.68 released.
767
768 Add support for 12 byte vendor specific commands in scsi-generics,
769 more (i.e. the last mandatory) low-level changes to support
770 loadable modules, plus a few other changes people have requested
771 lately. Changes by me (ERY) unless otherwise noted. Spelling
772 changes appear from some unknown corner of the universe.
773
774 * Throughout: Change COMMAND_SIZE() to use SCpnt->cmd_len.
775
776 * Throughout: Change info() low level function to take a Scsi_Host
777 pointer. This way the info function can return specific
778 information about the host in question, if desired.
779
780 * All low-level drivers: Add NULL in initializer for the
781 usage_count field added to Scsi_Host_Template.
782
783 * aha152x.[c,h]: Remove redundant info() function.
784
785 * aha1542.[c,h]: Likewise.
786
787 * aha1740.[c,h]: Likewise.
788
789 * aha274x.[c,h]: Likewise.
790
791 * eata.[c,h]: Likewise.
792
793 * pas16.[c,h]: Likewise.
794
795 * scsi_debug.[c,h]: Likewise.
796
797 * t128.[c,h]: Likewise.
798
799 * u14-34f.[c,h]: Likewise.
800
801 * ultrastor.[c,h]: Likewise.
802
803 * wd7000.[c,h]: Likewise.
804
805 * aha1542.c: Add support for command line options with lilo to set
806 DMA parameters, I/O port. From Matt Aarnio.
807
808 * buslogic.[c,h]: New version (1.13) from Dave Gentzel.
809
810 * hosts.h: Add new field to Scsi_Hosts "block" to allow blocking
811 all I/O to certain other cards. Helps prevent problems with some
812 ISA motherboards.
813
814 * hosts.h: Add usage_count to Scsi_Host_Template.
815
816 * hosts.h: Add n_io_port to Scsi_Host (used when releasing module).
817
818 * hosts.c: Initialize block field.
819
820 * in2000.c: Remove "static" declarations from exported functions.
821
822 * in2000.h: Likewise.
823
824 * scsi.c: Correctly set cmd_len field as required. Save and
825 change setting when doing a request_sense, restore when done.
826 Move abort timeout message. Fix panic in request_queueable to
827 print correct function name.
828
829 * scsi.c: When incrementing usage count, walk block linked list
830 for host, and or in SCSI_HOST_BLOCK bit. When decrementing usage
831 count to 0, clear this bit to allow usage to continue, wake up
832 processes waiting.
833
834
835 * scsi_ioctl.c: If we have an info() function, call it, otherwise
836 if we have a "name" field, use it, else do nothing.
837
838 * sd.c, sr.c: Clear cmd_len field prior to each command we
839 generate.
840
841 * sd.h: Add "has_part_table" bit to rscsi_disks.
842
843 * sg.[c,h]: Add support for vendor specific 12 byte commands (i.e.
844 override command length in COMMAND_SIZE).
845
846 * sr.c: Bugfix from Gerd in photocd code.
847
848 * sr.c: Bugfix in get_sectorsize - always use scsi_malloc buffer -
849 we cannot guarantee that the stack is < 16Mb.
850
851Tue Nov 22 15:40:46 1994 Eric Youngdale (eric@andante.aib.com)
852
853 * Linux 1.1.67 released.
854
855 * sr.c: Change spelling of manufactor to manufacturer.
856
857 * scsi.h: Likewise.
858
859 * scsi.c: Likewise.
860
861 * qlogic.c: Spelling corrections.
862
863 * in2000.h: Spelling corrections.
864
865 * in2000.c: Update from Bill Earnest, change from
866 jshiffle@netcom.com. Support new bios versions.
867
868 * README.qlogic: Spelling correction.
869
870Tue Nov 22 15:40:46 1994 Eric Youngdale (eric@andante.aib.com)
871
872 * Linux 1.1.66 released.
873
874 * u14-34f.c: Spelling corrections.
875
876 * sr.[h,c]: Add support for multi-session CDs from Gerd Knorr.
877
878 * scsi.h: Add manufactor field for keeping track of device
879 manufacturer.
880
881 * scsi.c: More spelling corrections.
882
883 * qlogic.h, qlogic.c, README.qlogic: New driver from Tom Zerucha.
884
885 * in2000.c, in2000.h: New driver from Brad McLean/Bill Earnest.
886
887 * fdomain.c: Spelling correction.
888
889 * eata.c: Spelling correction.
890
891Fri Nov 18 15:22:44 1994 Eric Youngdale (eric@andante.aib.com)
892
893 * Linux 1.1.65 released.
894
895 * eata.h: Update version string to 1.08.00.
896
897 * eata.c: Set sg_tablesize correctly for DPT PM2012 boards.
898
899 * aha274x.seq: Spell checking.
900
901 * README.st: Likewise.
902
903 * README.aha274x: Likewise.
904
905 * ChangeLog: Likewise.
906
907Tue Nov 15 15:35:08 1994 Eric Youngdale (eric@andante.aib.com)
908
909 * Linux 1.1.64 released.
910
911 * u14-34f.h: Update version number to 1.10.01.
912
913 * u14-34f.c: Use Scsi_Host can_queue variable instead of one from template.
914
915 * eata.[c,h]: New driver for DPT boards from Dario Ballabio.
916
917 * buslogic.c: Use can_queue field.
918
919Wed Nov 30 12:09:09 1994 Eric Youngdale (eric@andante.aib.com)
920
921 * Linux 1.1.63 released.
922
923 * sd.c: Give I/O error if we attempt 512 byte I/O to a disk with
924 1024 byte sectors.
925
926 * scsicam.c: Make sure we do read from whole disk (mask off
927 partition).
928
929 * scsi.c: Use can_queue in Scsi_Host structure.
930 Fix panic message about invalid host.
931
932 * hosts.c: Initialize can_queue from template.
933
934 * hosts.h: Add can_queue to Scsi_Host structure.
935
936 * aha1740.c: Print out warning about NULL ecbptr.
937
938Fri Nov 4 12:40:30 1994 Eric Youngdale (eric@andante.aib.com)
939
940 * Linux 1.1.62 released.
941
942 * fdomain.c: Update to version 5.20. (From Rik Faith). Support
943 BIOS version 3.5.
944
945 * st.h: Add ST_EOD symbol.
946
947 * st.c: Patches from Kai Makisara - support additional densities,
948 add support for MTFSS, MTBSS, MTWSM commands.
949
950 * README.st: Update to document new commands.
951
952 * scsi.c: Add Mediavision CDR-H93MV to blacklist.
953
954Sat Oct 29 20:57:36 1994 Eric Youngdale (eric@andante.aib.com)
955
956 * Linux 1.1.60 released.
957
958 * u14-34f.[c,h]: New driver from Dario Ballabio.
959
960 * aic7770.c, aha274x_seq.h, aha274x.seq, aha274x.h, aha274x.c,
961 README.aha274x: New files, new driver from John Aycock.
962
963
964Tue Oct 11 08:47:39 1994 Eric Youngdale (eric@andante)
965
966 * Linux 1.1.54 released.
967
968 * Add third PCI chip id. [Drew]
969
970 * buslogic.c: Set BUSLOGIC_CMDLUN back to 1 [Eric].
971
972 * ultrastor.c: Fix asm directives for new GCC.
973
974 * sr.c, sd.c: Use new end_scsi_request function.
975
976 * scsi.h(end_scsi_request): Return pointer to block if still
977 active, else return NULL if inactive. Fixes race condition.
978
979Sun Oct 9 20:23:14 1994 Eric Youngdale (eric@andante)
980
981 * Linux 1.1.53 released.
982
983 * scsi.c: Do not allocate dma bounce buffers if we have exactly
984 16Mb.
985
986Fri Sep 9 05:35:30 1994 Eric Youngdale (eric@andante)
987
988 * Linux 1.1.51 released.
989
990 * aha152x.c: Add support for disabling the parity check. Update
991 to version 1.4. [Juergen].
992
993 * seagate.c: Tweak debugging message.
994
995Wed Aug 31 10:15:55 1994 Eric Youngdale (eric@andante)
996
997 * Linux 1.1.50 released.
998
999 * aha152x.c: Add eb800 for Vtech Platinum SMP boards. [Juergen].
1000
1001 * scsi.c: Add Quantum PD1225S to blacklist.
1002
1003Fri Aug 26 09:38:45 1994 Eric Youngdale (eric@andante)
1004
1005 * Linux 1.1.49 released.
1006
1007 * sd.c: Fix bug when we were deleting the wrong entry if we
1008 get an unsupported sector size device.
1009
1010 * sr.c: Another spelling patch.
1011
1012Thu Aug 25 09:15:27 1994 Eric Youngdale (eric@andante)
1013
1014 * Linux 1.1.48 released.
1015
1016 * Throughout: Use new semantics for request_dma, as appropriate.
1017
1018 * sr.c: Print correct device number.
1019
1020Sun Aug 21 17:49:23 1994 Eric Youngdale (eric@andante)
1021
1022 * Linux 1.1.47 released.
1023
1024 * NCR5380.c: Add support for LIMIT_TRANSFERSIZE.
1025
1026 * constants.h: Add prototype for print_Scsi_Cmnd.
1027
1028 * pas16.c: Some more minor tweaks. Test for Mediavision board.
1029 Allow for disks > 1Gb. [Drew??]
1030
1031 * sr.c: Set SCpnt->transfersize.
1032
1033Tue Aug 16 17:29:35 1994 Eric Youngdale (eric@andante)
1034
1035 * Linux 1.1.46 released.
1036
1037 * Throughout: More spelling fixups.
1038
1039 * buslogic.c: Add a few more fixups from Dave. Disk translation
1040 mainly.
1041
1042 * pas16.c: Add a few patches (Drew?).
1043
1044
1045Thu Aug 11 20:45:15 1994 Eric Youngdale (eric@andante)
1046
1047 * Linux 1.1.44 released.
1048
1049 * hosts.c: Add type casts for scsi_init_malloc.
1050
1051 * scsicam.c: Add type cast.
1052
1053Wed Aug 10 19:23:01 1994 Eric Youngdale (eric@andante)
1054
1055 * Linux 1.1.43 released.
1056
1057 * Throughout: Spelling cleanups. [??]
1058
1059 * aha152x.c, NCR53*.c, fdomain.c, g_NCR5380.c, pas16.c, seagate.c,
1060 t128.c: Use request_irq, not irqaction. [??]
1061
1062 * aha1542.c: Move test for shost before we start to use shost.
1063
1064 * aha1542.c, aha1740.c, ultrastor.c, wd7000.c: Use new
1065 calling sequence for request_irq.
1066
1067 * buslogic.c: Update from Dave Gentzel.
1068
1069Tue Aug 9 09:32:59 1994 Eric Youngdale (eric@andante)
1070
1071 * Linux 1.1.42 released.
1072
1073 * NCR5380.c: Change NCR5380_print_status to static.
1074
1075 * seagate.c: A few more bugfixes. Only Drew knows what they are
1076 for.
1077
1078 * ultrastor.c: Tweak some __asm__ directives so that it works
1079 with newer compilers. [??]
1080
1081Sat Aug 6 21:29:36 1994 Eric Youngdale (eric@andante)
1082
1083 * Linux 1.1.40 released.
1084
1085 * NCR5380.c: Return SCSI_RESET_WAKEUP from reset function.
1086
1087 * aha1542.c: Reset mailbox status after a bus device reset.
1088
1089 * constants.c: Fix typo (;;).
1090
1091 * g_NCR5380.c:
1092 * pas16.c: Correct usage of NCR5380_init.
1093
1094 * scsi.c: Remove redundant (and unused variables).
1095
1096 * sd.c: Use memset to clear all of rscsi_disks before we use it.
1097
1098 * sg.c: Ditto, except for scsi_generics.
1099
1100 * sr.c: Ditto, except for scsi_CDs.
1101
1102 * st.c: Initialize STp->device.
1103
1104 * seagate.c: Fix bug. [Drew]
1105
1106Thu Aug 4 08:47:27 1994 Eric Youngdale (eric@andante)
1107
1108 * Linux 1.1.39 released.
1109
1110 * Makefile: Fix typo in NCR53C7xx.
1111
1112 * st.c: Print correct number for device.
1113
1114Tue Aug 2 11:29:14 1994 Eric Youngdale (eric@esp22)
1115
1116 * Linux 1.1.38 released.
1117
1118 Lots of changes in 1.1.38. All from Drew unless otherwise noted.
1119
1120 * 53c7,8xx.c: New file from Drew. PCI driver.
1121
1122 * 53c7,8xx.h: Likewise.
1123
1124 * 53c7,8xx.scr: Likewise.
1125
1126 * 53c8xx_d.h, 53c8xx_u.h, script_asm.pl: Likewise.
1127
1128 * scsicam.c: New file from Drew. Read block 0 on the disk and
1129 read the partition table. Attempt to deduce the geometry from
1130 the partition table if possible. Only used by 53c[7,8]xx right
1131 now, but could be used by any device for which we have no way
1132 of identifying the geometry.
1133
1134 * sd.c: Use device letters instead of sd%d in a lot of messages.
1135
1136 * seagate.c: Fix bug that resulted in lockups with some devices.
1137
1138 * sr.c (sr_open): Return -EROFS, not -EACCES if we attempt to open
1139 device for write.
1140
1141 * hosts.c, Makefile: Update for new driver.
1142
1143 * NCR5380.c, NCR5380.h, g_NCR5380.h: Update from Drew to support
1144 53C400 chip.
1145
1146 * constants.c: Define CONST_CMND and CONST_MSG. Other minor
1147 cleanups along the way. Improve handling of CONST_MSG.
1148
1149 * fdomain.c, fdomain.h: New version from Rik Faith. Update to
1150 5.18. Should now support TMC-3260 PCI card with 18C30 chip.
1151
1152 * pas16.c: Update with new irq initialization.
1153
1154 * t128.c: Update with minor cleanups.
1155
1156 * scsi.c (scsi_pid): New variable - gives each command a unique
1157 id. Add Quantum LPS5235S to blacklist. Change in_scan to
1158 in_scan_scsis and make global.
1159
1160 * scsi.h: Add some defines for extended message handling,
1161 INITIATE/RELEASE_RECOVERY. Add a few new fields to support sync
1162 transfers.
1163
1164 * scsi_ioctl.h: Add ioctl to request synchronous transfers.
1165
1166
1167Tue Jul 26 21:36:58 1994 Eric Youngdale (eric@esp22)
1168
1169 * Linux 1.1.37 released.
1170
1171 * aha1542.c: Always call aha1542_mbenable, use new udelay
1172 mechanism so we do not wait a long time if the board does not
1173 implement this command.
1174
1175 * g_NCR5380.c: Remove #include <linux/config.h> and #if
1176 defined(CONFIG_SCSI_*).
1177
1178 * seagate.c: Likewise.
1179
1180 Next round of changes to support loadable modules. Getting closer
1181 now, still not possible to do anything remotely usable.
1182
1183 hosts.c: Create a linked list of detected high level devices.
1184 (scsi_register_device): New function to insert into this list.
1185 (scsi_init): Call scsi_register_device for each of the known high
1186 level drivers.
1187
1188 hosts.h: Add prototype for linked list header. Add structure
1189 definition for device template structure which defines the linked
1190 list.
1191
1192 scsi.c: (scan_scsis): Use linked list instead of knowledge about
1193 existing high level device drivers.
1194 (scsi_dev_init): Use init functions for drivers on linked list
1195 instead of explicit list to initialize and attach devices to high
1196 level drivers.
1197
1198 scsi.h: Add new field "attached" to scsi_device - count of number
1199 of high level devices attached.
1200
1201 sd.c, sr.c, sg.c, st.c: Adjust init/attach functions to use new
1202 scheme.
1203
1204Sat Jul 23 13:03:17 1994 Eric Youngdale (eric@esp22)
1205
1206 * Linux 1.1.35 released.
1207
1208 * ultrastor.c: Change constraint on asm() operand so that it works
1209 with gcc 2.6.0.
1210
1211Thu Jul 21 10:37:39 1994 Eric Youngdale (eric@esp22)
1212
1213 * Linux 1.1.33 released.
1214
1215 * sr.c(sr_open): Do not allow opens with write access.
1216
Paolo Ornati670e9f32006-10-03 22:57:56 +02001217Mon Jul 18 09:51:22 1994 Eric Youngdale (eric@esp22)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001218
1219 * Linux 1.1.31 released.
1220
1221 * sd.c: Increase SD_TIMEOUT from 300 to 600.
1222
1223 * sr.c: Remove stray task_struct* variable that was no longer
1224 used.
1225
1226 * sr_ioctl.c: Fix typo in up() call.
1227
1228Sun Jul 17 16:25:29 1994 Eric Youngdale (eric@esp22)
1229
1230 * Linux 1.1.30 released.
1231
1232 * scsi.c (scan_scsis): Fix detection of some Toshiba CDROM drives
1233 that report themselves as disk drives.
1234
1235 * (Throughout): Use request.sem instead of request.waiting.
1236 Should fix swap problem with fdomain.
1237
1238Thu Jul 14 10:51:42 1994 Eric Youngdale (eric@esp22)
1239
1240 * Linux 1.1.29 released.
1241
1242 * scsi.c (scan_scsis): Add new devices to end of linked list, not
1243 to the beginning.
1244
1245 * scsi.h (SCSI_SLEEP): Remove brain dead hack to try to save
1246 the task state before sleeping.
1247
1248Sat Jul 9 15:01:03 1994 Eric Youngdale (eric@esp22)
1249
1250 More changes to eventually support loadable modules. Mainly
1251 we want to use linked lists instead of arrays because it is easier
1252 to dynamically add and remove things this way.
1253
1254 Quite a bit more work is needed before loadable modules are
1255 possible (and usable) with scsi, but this is most of the grunge
1256 work.
1257
1258 * Linux 1.1.28 released.
1259
1260 * scsi.c, scsi.h (allocate_device, request_queueable): Change
1261 argument from index into scsi_devices to a pointer to the
1262 Scsi_Device struct.
1263
1264 * Throughout: Change all calls to allocate_device,
1265 request_queueable to use new calling sequence.
1266
1267 * Throughout: Use SCpnt->device instead of
1268 scsi_devices[SCpnt->index]. Ugh - the pointer was there all along
1269 - much cleaner this way.
1270
1271 * scsi.c (scsi_init_malloc, scsi_free_malloc): New functions -
1272 allow us to pretend that we have a working malloc when we
1273 initialize. Use this instead of passing memory_start, memory_end
1274 around all over the place.
1275
1276 * scsi.h, st.c, sr.c, sd.c, sg.c: Change *_init1 functions to use
1277 scsi_init_malloc, remove all arguments, no return value.
1278
1279 * scsi.h: Remove index field from Scsi_Device and Scsi_Cmnd
1280 structs.
1281
1282 * scsi.c (scsi_dev_init): Set up for scsi_init_malloc.
1283 (scan_scsis): Get SDpnt from scsi_init_malloc, and refresh
1284 when we discover a device. Free pointer before returning.
1285 Change scsi_devices into a linked list.
1286
1287 * scsi.c (scan_scsis): Change to only scan one host.
1288 (scsi_dev_init): Loop over all detected hosts, and scan them.
1289
1290 * hosts.c (scsi_init_free): Change so that number of extra bytes
1291 is stored in struct, and we do not have to pass it each time.
1292
1293 * hosts.h: Change Scsi_Host_Template struct to include "next" and
1294 "release" functions. Initialize to NULL in all low level
1295 adapters.
1296
1297 * hosts.c: Rename scsi_hosts to builtin_scsi_hosts, create linked
1298 list scsi_hosts, linked together with the new "next" field.
1299
1300Wed Jul 6 05:45:02 1994 Eric Youngdale (eric@esp22)
1301
1302 * Linux 1.1.25 released.
1303
1304 * aha152x.c: Changes from Juergen - cleanups and updates.
1305
1306 * sd.c, sr.c: Use new check_media_change and revalidate
1307 file_operations fields.
1308
1309 * st.c, st.h: Add changes from Kai Makisara, dated Jun 22.
1310
1311 * hosts.h: Change SG_ALL back to 0xff. Apparently soft error
1312 in /dev/brain resulted in having this bumped up.
1313 Change first parameter in bios_param function to be Disk * instead
1314 of index into rscsi_disks.
1315
1316 * sd_ioctl.c: Pass pointer to rscsi_disks element instead of index
1317 to array.
1318
1319 * sd.h: Add struct name "scsi_disk" to typedef for Scsi_Disk.
1320
1321 * scsi.c: Remove redundant Maxtor XT8760S from blacklist.
1322 In scsi_reset, add printk when DEBUG defined.
1323
1324 * All low level drivers: Modify definitions of bios_param in
1325 appropriate way.
1326
1327Thu Jun 16 10:31:59 1994 Eric Youngdale (eric@esp22)
1328
1329 * Linux 1.1.20 released.
1330
1331 * scsi_ioctl.c: Only pass down the actual number of characters
1332 required to scsi_do_cmd, not the one rounded up to a even number
1333 of sectors.
1334
1335 * ultrastor.c: Changes from Caleb Epstein for 24f cards. Support
1336 larger SG lists.
1337
1338 * ultrastor.c: Changes from me - use scsi_register to register
1339 host. Add some consistency checking,
1340
1341Wed Jun 1 21:12:13 1994 Eric Youngdale (eric@esp22)
1342
1343 * Linux 1.1.19 released.
1344
1345 * scsi.h: Add new return code for reset() function:
1346 SCSI_RESET_PUNT.
1347
1348 * scsi.c: Make SCSI_RESET_PUNT the same as SCSI_RESET_WAKEUP for
1349 now.
1350
1351 * aha1542.c: If the command responsible for the reset is not
1352 pending, return SCSI_RESET_PUNT.
1353
1354 * aha1740.c, buslogic.c, wd7000.c, ultrastor.c: Return
1355 SCSI_RESET_PUNT instead of SCSI_RESET_SNOOZE.
1356
1357Tue May 31 19:36:01 1994 Eric Youngdale (eric@esp22)
1358
1359 * buslogic.c: Do not print out message about "must be Adaptec"
1360 if we have detected a buslogic card. Print out a warning message
1361 if we are configuring for >16Mb, since the 445S at board level
1362 D or earlier does not work right. The "D" level board can be made
1363 to work by flipping an undocumented switch, but this is too subtle.
1364
1365 Changes based upon patches in Yggdrasil distribution.
1366
1367 * sg.c, sg.h: Return sense data to user.
1368
1369 * aha1542.c, aha1740.c, buslogic.c: Do not panic if
1370 sense buffer is wrong size.
1371
1372 * hosts.c: Test for ultrastor card before any of the others.
1373
1374 * scsi.c: Allow boot-time option for max_scsi_luns=? so that
1375 buggy firmware has an easy work-around.
1376
1377Sun May 15 20:24:34 1994 Eric Youngdale (eric@esp22)
1378
1379 * Linux 1.1.15 released.
1380
1381 Post-codefreeze thaw...
1382
1383 * buslogic.[c,h]: New driver from David Gentzel.
1384
1385 * hosts.h: Add use_clustering field to explicitly say whether
1386 clustering should be used for devices attached to this host
1387 adapter. The buslogic board apparently supports large SG lists,
1388 but it is apparently faster if sd.c condenses this into a smaller
1389 list.
1390
1391 * sd.c: Use this field instead of heuristic.
1392
1393 * All host adapter include files: Add appropriate initializer for
1394 use_clustering field.
1395
1396 * scsi.h: Add #defines for return codes for the abort and reset
1397 functions. There are now a specific set of return codes to fully
1398 specify all of the possible things that the low-level adapter
1399 could do.
1400
1401 * scsi.c: Act based upon return codes from abort/reset functions.
1402
1403 * All host adapter abort/reset functions: Return new return code.
1404
1405 * Add code in scsi.c to help debug timeouts. Use #define
1406 DEBUG_TIMEOUT to enable this.
1407
1408 * scsi.c: If the host->irq field is set, use
1409 disable_irq/enable_irq before calling queuecommand if we
1410 are not already in an interrupt. Reduce races, and we
1411 can be sloppier about cli/sti in the interrupt routines now
1412 (reduce interrupt latency).
1413
1414 * constants.c: Fix some things to eliminate warnings. Add some
1415 sense descriptions that were omitted before.
1416
1417 * aha1542.c: Watch for SCRD from host adapter - if we see it, set
1418 a flag. Currently we only print out the number of pending
1419 commands that might need to be restarted.
1420
1421 * aha1542.c (aha1542_abort): Look for lost interrupts, OGMB still
1422 full, and attempt to recover. Otherwise give up.
1423
1424 * aha1542.c (aha1542_reset): Try BUS DEVICE RESET, and then pass
1425 DID_RESET back up to the upper level code for all commands running
1426 on this target (even on different LUNs).
1427
1428Sat May 7 14:54:01 1994
1429
1430 * Linux 1.1.12 released.
1431
1432 * st.c, st.h: New version from Kai. Supports boot time
1433 specification of number of buffers.
1434
1435 * wd7000.[c,h]: Updated driver from John Boyd. Now supports
1436 more than one wd7000 board in machine at one time, among other things.
1437
1438Wed Apr 20 22:20:35 1994
1439
1440 * Linux 1.1.8 released.
1441
1442 * sd.c: Add a few type casts where scsi_malloc is called.
1443
1444Wed Apr 13 12:53:29 1994
1445
1446 * Linux 1.1.4 released.
1447
1448 * scsi.c: Clean up a few printks (use %p to print pointers).
1449
1450Wed Apr 13 11:33:02 1994
1451
1452 * Linux 1.1.3 released.
1453
1454 * fdomain.c: Update to version 5.16 (Handle different FIFO sizes
1455 better).
1456
1457Fri Apr 8 08:57:19 1994
1458
1459 * Linux 1.1.2 released.
1460
1461 * Throughout: SCSI portion of cluster diffs added.
1462
1463Tue Apr 5 07:41:50 1994
1464
1465 * Linux 1.1 development tree initiated.
1466
1467 * The linux 1.0 development tree is now effectively frozen except
1468 for obvious bugfixes.
1469
1470******************************************************************
1471******************************************************************
1472******************************************************************
1473******************************************************************
1474
1475Sun Apr 17 00:17:39 1994
1476
1477 * Linux 1.0, patchlevel 9 released.
1478
1479 * fdomain.c: Update to version 5.16 (Handle different FIFO sizes
1480 better).
1481
1482Thu Apr 7 08:36:20 1994
1483
1484 * Linux 1.0, patchlevel8 released.
1485
1486 * fdomain.c: Update to version 5.15 from 5.9. Handles 3.4 bios.
1487
1488Sun Apr 3 14:43:03 1994
1489
1490 * Linux 1.0, patchlevel6 released.
1491
1492 * wd7000.c: Make stab at fixing race condition.
1493
1494Sat Mar 26 14:14:50 1994
1495
1496 * Linux 1.0, patchlevel5 released.
1497
1498 * aha152x.c, Makefile: Fix a few bugs (too much data message).
1499 Add a few more bios signatures. (Patches from Juergen).
1500
1501 * aha1542.c: Fix race condition in aha1542_out.
1502
1503Mon Mar 21 16:36:20 1994
1504
1505 * Linux 1.0, patchlevel3 released.
1506
1507 * sd.c, st.c, sr.c, sg.c: Return -ENXIO, not -ENODEV if we attempt
1508 to open a non-existent device.
1509
1510 * scsi.c: Add Chinon cdrom to blacklist.
1511
1512 * sr_ioctl.c: Check return status of verify_area.
1513
1514Sat Mar 6 16:06:19 1994
1515
1516 * Linux 1.0 released (technically a pre-release).
1517
1518 * scsi.c: Add IMS CDD521, Maxtor XT-8760S to blacklist.
1519
1520Tue Feb 15 10:58:20 1994
1521
1522 * pl15e released.
1523
1524 * aha1542.c: For 1542C, allow dynamic device scan with >1Gb turned
1525 off.
1526
1527 * constants.c: Fix typo in definition of CONSTANTS.
1528
1529 * pl15d released.
1530
1531Fri Feb 11 10:10:16 1994
1532
1533 * pl15c released.
1534
1535 * scsi.c: Add Maxtor XT-3280 and Rodime RO3000S to blacklist.
1536
1537 * scsi.c: Allow tagged queueing for scsi 3 devices as well.
1538 Some really old devices report a version number of 0. Disallow
1539 LUN != 0 for these.
1540
1541Thu Feb 10 09:48:57 1994
1542
1543 * pl15b released.
1544
1545Sun Feb 6 12:19:46 1994
1546
1547 * pl15a released.
1548
1549Fri Feb 4 09:02:17 1994
1550
1551 * scsi.c: Add Teac cdrom to blacklist.
1552
1553Thu Feb 3 14:16:43 1994
1554
1555 * pl15 released.
1556
1557Tue Feb 1 15:47:43 1994
1558
1559 * pl14w released.
1560
1561 * wd7000.c (wd_bases): Fix typo in last change.
1562
1563Mon Jan 24 17:37:23 1994
1564
1565 * pl14u released.
1566
1567 * aha1542.c: Support 1542CF/extended bios. Different from 1542C
1568
1569 * wd7000.c: Allow bios at 0xd8000 as well.
1570
1571 * ultrastor.c: Do not truncate cylinders to 1024.
1572
1573 * fdomain.c: Update to version 5.9 (add new bios signature).
1574
1575 * NCR5380.c: Update from Drew - should work a lot better now.
1576
1577Sat Jan 8 15:13:10 1994
1578
1579 * pl14o released.
1580
1581 * sr_ioctl.c: Zero reserved field before trying to set audio volume.
1582
1583Wed Jan 5 13:21:10 1994
1584
1585 * pl14m released.
1586
1587 * fdomain.c: Update to version 5.8. No functional difference???
1588
1589Tue Jan 4 14:26:13 1994
1590
1591 * pl14l released.
1592
1593 * ultrastor.c: Remove outl, inl functions (now provided elsewhere).
1594
1595Mon Jan 3 12:27:25 1994
1596
1597 * pl14k released.
1598
1599 * aha152x.c: Remove insw and outsw functions.
1600
1601 * fdomain.c: Ditto.
1602
1603Wed Dec 29 09:47:20 1993
1604
1605 * pl14i released.
1606
1607 * scsi.c: Support RECOVERED_ERROR for tape drives.
1608
1609 * st.c: Update of tape driver from Kai.
1610
1611Tue Dec 21 09:18:30 1993
1612
1613 * pl14g released.
1614
1615 * aha1542.[c,h]: Support extended BIOS stuff.
1616
1617 * scsi.c: Clean up messages about disks, so they are displayed as
1618 sda, sdb, etc instead of sd0, sd1, etc.
1619
1620 * sr.c: Force reread of capacity if disk was changed.
1621 Clear buffer before asking for capacity/sectorsize (some drives
1622 do not report this properly). Set needs_sector_size flag if
1623 drive did not return sensible sector size.
1624
1625Mon Dec 13 12:13:47 1993
1626
1627 * aha152x.c: Update to version .101 from Juergen.
1628
1629Mon Nov 29 03:03:00 1993
1630
1631 * linux 0.99.14 released.
1632
1633 * All scsi stuff moved from kernel/blk_drv/scsi to drivers/scsi.
1634
1635 * Throughout: Grammatical corrections to various comments.
1636
1637 * Makefile: fix so that we do not need to compile things we are
1638 not going to use.
1639
1640 * NCR5380.c, NCR5380.h, g_NCR5380.c, g_NCR5380.h, pas16.c,
1641 pas16.h, t128.c, t128.h: New files from Drew.
1642
1643 * aha152x.c, aha152x.h: New files from Juergen Fischer.
1644
1645 * aha1542.c: Support for more than one 1542 in the machine
1646 at the same time. Make functions static that do not need
1647 visibility.
1648
1649 * aha1740.c: Set NEEDS_JUMPSTART flag in reset function, so we
1650 know to restart the command. Change prototype of aha1740_reset
1651 to take a command pointer.
1652
1653 * constants.c: Clean up a few things.
1654
1655 * fdomain.c: Update to version 5.6. Move snarf_region. Allow
1656 board to be set at different SCSI ids. Remove support for
1657 reselection (did not work well). Set JUMPSTART flag in reset
1658 code.
1659
1660 * hosts.c: Support new low-level adapters. Allow for more than
1661 one adapter of a given type.
1662
1663 * hosts.h: Allow for more than one adapter of a given type.
1664
1665 * scsi.c: Add scsi_device_types array, if NEEDS_JUMPSTART is set
1666 after a low-level reset, start the command again. Sort blacklist,
1667 and add Maxtor MXT-1240S, XT-4170S, NEC CDROM 84, Seagate ST157N.
1668
1669 * scsi.h: Add constants for tagged queueing.
1670
1671 * Throughout: Use constants from major.h instead of hardcoded
1672 numbers for major numbers.
1673
1674 * scsi_ioctl.c: Fix bug in buffer length in ioctl_command. Use
1675 verify_area in GET_IDLUN ioctl. Add new ioctls for
1676 TAGGED_QUEUE_ENABLE, DISABLE. Only allow IOCTL_SEND_COMMAND by
1677 superuser.
1678
1679 * sd.c: Only pay attention to UNIT_ATTENTION for removable disks.
1680 Fix bug where sometimes portions of blocks would get lost
1681 resulting in processes hanging. Add messages when we spin up a
1682 disk, and fix a bug in the timing. Increase read-ahead for disks
1683 that are on a scatter-gather capable host adapter.
1684
1685 * seagate.c: Fix so that some parameters can be set from the lilo
1686 prompt. Supply jumpstart flag if we are resetting and need the
1687 command restarted. Fix so that we return 1 if we detect a card
1688 so that multiple card detection works correctly. Add yet another
1689 signature for FD cards (950). Add another signature for ST0x.
1690
1691 * sg.c, sg.h: New files from Lawrence Foard for generic scsi
1692 access.
1693
1694 * sr.c: Add type casts for (void*) so that we can do pointer
1695 arithmetic. Works with GCC without this, but it is not strictly
1696 correct. Same bugfix as was in sd.c. Increase read-ahead a la
1697 disk driver.
1698
1699 * sr_ioctl.c: Use scsi_malloc buffer instead of buffer from stack
1700 since we cannot guarantee that the stack is < 16Mb.
1701
1702 ultrastor.c: Update to support 24f properly (JFC's driver).
1703
1704 wd7000.c: Supply jumpstart flag for reset. Do not round up
1705 number of cylinders in biosparam function.
1706
1707Sat Sep 4 20:49:56 1993
1708
1709 * 0.99pl13 released.
1710
1711 * Throughout: Use check_region/snarf_region for all low-level
1712 drivers.
1713
1714 * aha1542.c: Do hard reset instead of soft (some ethercard probes
1715 screw us up).
1716
1717 * scsi.c: Add new flag ASKED_FOR_SENSE so that we can tell if we are
1718 in a loop whereby the device returns null sense data.
1719
1720 * sd.c: Add code to spin up a drive if it is not already spinning.
1721 Do this one at a time to make it easier on power supplies.
1722
1723 * sd_ioctl.c: Use sync_dev instead of fsync_dev in BLKFLSBUF ioctl.
1724
1725 * seagate.c: Switch around DATA/CONTROL lines.
1726
1727 * st.c: Change sense to unsigned.
1728
1729Thu Aug 5 11:59:18 1993
1730
1731 * 0.99pl12 released.
1732
1733 * constants.c, constants.h: New files with ascii descriptions of
1734 various conditions.
1735
1736 * Makefile: Do not try to count the number of low-level drivers,
1737 just generate the list of .o files.
1738
1739 * aha1542.c: Replace 16 with sizeof(SCpnt->sense_buffer). Add tests
1740 for addresses > 16Mb, panic if we find one.
1741
1742 * aha1740.c: Ditto with sizeof().
1743
1744 * fdomain.c: Update to version 3.18. Add new signature, register IRQ
1745 with irqaction. Use ID 7 for new board. Be more intelligent about
1746 obtaining the h/s/c numbers for biosparam.
1747
1748 * hosts.c: Do not depend upon Makefile generated count of the number
1749 of low-level host adapters.
1750
1751 * scsi.c: Use array for scsi_command_size instead of a function. Add
1752 Texel cdrom and Maxtor XT-4380S to blacklist. Allow compile time
1753 option for no-multi lun scan. Add semaphore for possible problems
1754 with handshaking, assume device is faulty until we know it not to be
1755 the case. Add DEBUG_INIT symbol to dump info as we scan for devices.
1756 Zero sense buffer so we can tell if we need to request it. When
1757 examining sense information, request sense if buffer is all zero.
1758 If RESET, request sense information to see what to do next.
1759
1760 * scsi_debug.c: Change some constants to use symbols like INT_MAX.
1761
1762 * scsi_ioctl.c (kernel_scsi_ioctl): New function -for making ioctl
1763 calls from kernel space.
1764
1765 * sd.c: Increase timeout to 300. Use functions in constants.h to
1766 display info. Use scsi_malloc buffer for READ_CAPACITY, since
1767 we cannot guarantee that a stack based buffer is < 16Mb.
1768
1769 * sd_ioctl.c: Add BLKFLSBUF ioctl.
1770
1771 * seagate.c: Add new compile time options for ARBITRATE,
1772 SLOW_HANDSHAKE, and SLOW_RATE. Update assembly loops for transferring
1773 data. Use kernel_scsi_ioctl to request mode page with geometry.
1774
1775 * sr.c: Use functions in constants.c to display messages.
1776
1777 * st.c: Support for variable block size.
1778
1779 * ultrastor.c: Do not use cache for tape drives. Set
1780 unchecked_isa_dma flag, even though this may not be needed (gets set
1781 later).
1782
1783Sat Jul 17 18:32:44 1993
1784
1785 * 0.99pl11 released. C++ compilable.
1786
1787 * Throughout: Add type casts all over the place, and use "ip" instead
1788 of "info" in the various biosparam functions.
1789
1790 * Makefile: Compile seagate.c with C++ compiler.
1791
1792 * aha1542.c: Always set ccb pointer as this gets trashed somehow on
1793 some systems. Add a few type casts. Update biosparam function a little.
1794
1795 * aha1740.c: Add a few type casts.
1796
1797 * fdomain.c: Update to version 3.17 from 3.6. Now works with
1798 TMC-18C50.
1799
1800 * scsi.c: Minor changes here and there with datatypes. Save use_sg
1801 when requesting sense information so that this can properly be
1802 restored if we retry the command. Set aside dma buffers assuming each
1803 block is 1 page, not 1Kb minix block.
1804
1805 * scsi_ioctl.c: Add a few type casts. Other minor changes.
1806
1807 * sd.c: Correctly free all scsi_malloc'd memory if we run out of
1808 dma_pool. Store blocksize information for each partition.
1809
1810 * seagate.c: Minor cleanups here and there.
1811
1812 * sr.c: Set up blocksize array for all discs. Fix bug in freeing
1813 buffers if we run out of dma pool.
1814
1815Thu Jun 2 17:58:11 1993
1816
1817 * 0.99pl10 released.
1818
1819 * aha1542.c: Support for BT 445S (VL-bus board with no dma channel).
1820
1821 * fdomain.c: Upgrade to version 3.6. Preliminary support for TNC-18C50.
1822
1823 * scsi.c: First attempt to fix problem with old_use_sg. Change
1824 NOT_READY to a SUGGEST_ABORT. Fix timeout race where time might
1825 get decremented past zero.
1826
1827 * sd.c: Add block_fsync function to dispatch table.
1828
1829 * sr.c: Increase timeout to 500 from 250. Add entry for sync in
1830 dispatch table (supply NULL). If we do not have a sectorsize,
1831 try to get it in the sd_open function. Add new function just to
1832 obtain sectorsize.
1833
1834 * sr.h: Add needs_sector_size semaphore.
1835
1836 * st.c: Add NULL for fsync in dispatch table.
1837
1838 * wd7000.c: Allow another condition for power on that are normal
1839 and do not require a panic.
1840
1841Thu Apr 22 23:10:11 1993
1842
1843 * 0.99pl9 released.
1844
1845 * aha1542.c: Use (void) instead of () in setup_mailboxes.
1846
1847 * scsi.c: Initialize transfersize and underflow fields in SCmd to 0.
1848 Do not panic for unsupported message bytes.
1849
1850 * scsi.h: Allocate 12 bytes instead of 10 for commands. Add
1851 transfersize and underflow fields.
1852
1853 * scsi_ioctl.c: Further bugfix to ioctl_probe.
1854
1855 * sd.c: Use long instead of int for last parameter in sd_ioctl.
1856 Initialize transfersize and underflow fields.
1857
1858 * sd_ioctl.c: Ditto for sd_ioctl(,,,,);
1859
1860 * seagate.c: New version from Drew. Includes new signatures for FD
1861 cards. Support for 0ws jumper. Correctly initialize
1862 scsi_hosts[hostnum].this_id. Improved handing of
1863 disconnect/reconnect, and support command linking. Use
1864 transfersize and underflow fields. Support scatter-gather.
1865
1866 * sr.c, sr_ioctl.c: Use long instead of int for last parameter in sr_ioctl.
1867 Use buffer and buflength in do_ioctl. Patches from Chris Newbold for
1868 scsi-2 audio commands.
1869
1870 * ultrastor.c: Comment out in_byte (compiler warning).
1871
1872 * wd7000.c: Change () to (void) in wd7000_enable_dma.
1873
1874Wed Mar 31 16:36:25 1993
1875
1876 * 0.99pl8 released.
1877
1878 * aha1542.c: Handle mailboxes better for 1542C.
1879 Do not truncate number of cylinders at 1024 for biosparam call.
1880
1881 * aha1740.c: Fix a few minor bugs for multiple devices.
1882 Same as above for biosparam.
1883
1884 * scsi.c: Add lockable semaphore for removable devices that can have
1885 media removal prevented. Add another signature for flopticals.
1886 (allocate_device): Fix race condition. Allow more space in dma pool
1887 for blocksizes of up to 4Kb.
1888
1889 * scsi.h: Define COMMAND_SIZE. Define a SCSI specific version of
1890 INIT_REQUEST that can run with interrupts off.
1891
1892 * scsi_ioctl.c: Make ioctl_probe function more idiot-proof. If
1893 a removable device says ILLEGAL REQUEST to a door-locking command,
1894 clear lockable flag. Add SCSI_IOCTL_GET_IDLUN ioctl. Do not attempt
1895 to lock door for devices that do not have lockable semaphore set.
1896
1897 * sd.c: Fix race condition for multiple disks. Use INIT_SCSI_REQUEST
1898 instead of INIT_REQUEST. Allow sector sizes of 1024 and 256. For
1899 removable disks that are not ready, mark them as having a media change
1900 (some drives do not report this later).
1901
1902 * seagate.c: Use volatile keyword for memory-mapped register pointers.
1903
1904 * sr.c: Fix race condition, a la sd.c. Increase the number of retries
1905 to 1. Use INIT_SCSI_REQUEST. Allow 512 byte sector sizes. Do a
1906 read_capacity when we init the device so we know the size and
1907 sectorsize.
1908
1909 * st.c: If ioctl not found in st.c, try scsi_ioctl for others.
1910
1911 * ultrastor.c: Do not truncate number of cylinders at 1024 for
1912 biosparam call.
1913
1914 * wd7000.c: Ditto.
1915 Throughout: Use COMMAND_SIZE macro to determine length of scsi
1916 command.
1917
1918
1919
1920Sat Mar 13 17:31:29 1993
1921
1922 * 0.99pl7 released.
1923
1924 Throughout: Improve punctuation in some messages, and use new
1925 verify_area syntax.
1926
1927 * aha1542.c: Handle unexpected interrupts better.
1928
1929 * scsi.c: Ditto. Handle reset conditions a bit better, asking for
1930 sense information and retrying if required.
1931
1932 * scsi_ioctl.c: Allow for 12 byte scsi commands.
1933
1934 * ultrastor.c: Update to use scatter-gather.
1935
1936Sat Feb 20 17:57:15 1993
1937
1938 * 0.99pl6 released.
1939
1940 * fdomain.c: Update to version 3.5. Handle spurious interrupts
1941 better.
1942
1943 * sd.c: Use register_blkdev function.
1944
1945 * sr.c: Ditto.
1946
1947 * st.c: Use register_chrdev function.
1948
1949 * wd7000.c: Undo previous change.
1950
1951Sat Feb 6 11:20:43 1993
1952
1953 * 0.99pl5 released.
1954
1955 * scsi.c: Fix bug in testing for UNIT_ATTENTION.
1956
1957 * wd7000.c: Check at more addresses for bios. Fix bug in biosparam
1958 (heads & sectors turned around).
1959
1960Wed Jan 20 18:13:59 1993
1961
1962 * 0.99pl4 released.
1963
1964 * scsi.c: Ignore leading spaces when looking for blacklisted devices.
1965
1966 * seagate.c: Add a few new signatures for FD cards. Another patch
1967 with SCint to fix race condition. Use recursion_depth to keep track
1968 of how many times we have been recursively called, and do not start
1969 another command unless we are on the outer level. Fixes bug
1970 with Syquest cartridge drives (used to crash kernel), because
1971 they do not disconnect with large data transfers.
1972
1973Tue Jan 12 14:33:36 1993
1974
1975 * 0.99pl3 released.
1976
1977 * fdomain.c: Update to version 3.3 (a few new signatures).
1978
1979 * scsi.c: Add CDU-541, Denon DRD-25X to blacklist.
1980 (allocate_request, request_queueable): Init request.waiting to NULL if
1981 non-buffer type of request.
1982
1983 * seagate.c: Allow controller to be overridden with CONTROLLER symbol.
1984 Set SCint=NULL when we are done, to remove race condition.
1985
1986 * st.c: Changes from Kai.
1987
1988Wed Dec 30 20:03:47 1992
1989
1990 * 0.99pl2 released.
1991
1992 * scsi.c: Blacklist back in. Remove Newbury drive as other bugfix
1993 eliminates need for it here.
1994
1995 * sd.c: Return ENODEV instead of EACCES if no such device available.
1996 (sd_init) Init blkdev_fops earlier so that sd_open is available sooner.
1997
1998 * sr.c: Same as above for sd.c.
1999
2000 * st.c: Return ENODEV instead of ENXIO if no device. Init chrdev_fops
2001 sooner, so that it is always there even if no tapes.
2002
2003 * seagate.c (controller_type): New variable to keep track of ST0x or
2004 FD. Modify signatures list to indicate controller type, and init
2005 controller_type once we find a match.
2006
2007 * wd7000.c (wd7000_set_sync): Remove redundant function.
2008
2009Sun Dec 20 16:26:24 1992
2010
2011 * 0.99pl1 released.
2012
2013 * scsi_ioctl.c: Bugfix - check dev->index, not dev->id against
2014 NR_SCSI_DEVICES.
2015
2016 * sr_ioctl.c: Verify that device exists before allowing an ioctl.
2017
2018 * st.c: Patches from Kai - change timeout values, improve end of tape
2019 handling.
2020
2021Sun Dec 13 18:15:23 1992
2022
2023 * 0.99 kernel released. Baseline for this ChangeLog.