blob: 35d599e7250d2d8c29defd0373ff25fed0b03467 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * pm.h - Power management interface
3 *
4 * Copyright (C) 2000 Andrew Henroid
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21#ifndef _LINUX_PM_H
22#define _LINUX_PM_H
23
Linus Torvalds1da177e2005-04-16 15:20:36 -070024#include <linux/list.h>
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +020025#include <linux/workqueue.h>
26#include <linux/spinlock.h>
27#include <linux/wait.h>
28#include <linux/timer.h>
Rafael J. Wysocki5af84b82010-01-23 22:23:32 +010029#include <linux/completion.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070030
31/*
Linus Torvalds1da177e2005-04-16 15:20:36 -070032 * Callbacks for platform drivers to implement.
33 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070034extern void (*pm_power_off)(void);
Rafael J. Wysockibd804eb2007-07-19 01:47:40 -070035extern void (*pm_power_off_prepare)(void);
Linus Torvalds1da177e2005-04-16 15:20:36 -070036
Jesse Barnesf43f6272013-02-04 13:37:20 +000037struct device; /* we have a circular dep with device.h */
38#ifdef CONFIG_VT_CONSOLE_SLEEP
39extern void pm_vt_switch_required(struct device *dev, bool required);
40extern void pm_vt_switch_unregister(struct device *dev);
41#else
42static inline void pm_vt_switch_required(struct device *dev, bool required)
43{
44}
45static inline void pm_vt_switch_unregister(struct device *dev)
46{
47}
48#endif /* CONFIG_VT_CONSOLE_SLEEP */
49
Linus Torvalds1da177e2005-04-16 15:20:36 -070050/*
51 * Device power management
52 */
53
54struct device;
55
Alan Stern7490e442010-09-25 23:35:15 +020056#ifdef CONFIG_PM
57extern const char power_group_name[]; /* = "power" */
58#else
59#define power_group_name NULL
60#endif
61
Pavel Machekca078ba2005-09-03 15:56:57 -070062typedef struct pm_message {
63 int event;
64} pm_message_t;
Linus Torvalds1da177e2005-04-16 15:20:36 -070065
Rafael J. Wysocki1eede072008-05-20 23:00:01 +020066/**
Rafael J. Wysockiadf09492008-10-06 22:46:05 +020067 * struct dev_pm_ops - device PM callbacks
Rafael J. Wysocki1eede072008-05-20 23:00:01 +020068 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +010069 * Several device power state transitions are externally visible, affecting
David Brownell82bb67f2006-08-14 23:11:04 -070070 * the state of pending I/O queues and (for drivers that touch hardware)
71 * interrupts, wakeups, DMA, and other hardware state. There may also be
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +010072 * internal transitions to various low-power modes which are transparent
David Brownell82bb67f2006-08-14 23:11:04 -070073 * to the rest of the driver stack (such as a driver that's ON gating off
74 * clocks which are not in active use).
Linus Torvalds1da177e2005-04-16 15:20:36 -070075 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +010076 * The externally visible transitions are handled with the help of callbacks
77 * included in this structure in such a way that two levels of callbacks are
78 * involved. First, the PM core executes callbacks provided by PM domains,
79 * device types, classes and bus types. They are the subsystem-level callbacks
80 * supposed to execute callbacks provided by device drivers, although they may
81 * choose not to do that. If the driver callbacks are executed, they have to
82 * collaborate with the subsystem-level callbacks to achieve the goals
83 * appropriate for the given system transition, given transition phase and the
84 * subsystem the device belongs to.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +020085 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +010086 * @prepare: The principal role of this callback is to prevent new children of
87 * the device from being registered after it has returned (the driver's
88 * subsystem and generally the rest of the kernel is supposed to prevent
89 * new calls to the probe method from being made too once @prepare() has
90 * succeeded). If @prepare() detects a situation it cannot handle (e.g.
91 * registration of a child already in progress), it may return -EAGAIN, so
92 * that the PM core can execute it once again (e.g. after a new child has
93 * been registered) to recover from the race condition.
94 * This method is executed for all kinds of suspend transitions and is
95 * followed by one of the suspend callbacks: @suspend(), @freeze(), or
Rafael J. Wysockiaae45182014-05-16 02:46:50 +020096 * @poweroff(). If the transition is a suspend to memory or standby (that
97 * is, not related to hibernation), the return value of @prepare() may be
98 * used to indicate to the PM core to leave the device in runtime suspend
99 * if applicable. Namely, if @prepare() returns a positive number, the PM
100 * core will understand that as a declaration that the device appears to be
101 * runtime-suspended and it may be left in that state during the entire
102 * transition and during the subsequent resume if all of its descendants
103 * are left in runtime suspend too. If that happens, @complete() will be
104 * executed directly after @prepare() and it must ensure the proper
105 * functioning of the device after the system resume.
106 * The PM core executes subsystem-level @prepare() for all devices before
107 * starting to invoke suspend callbacks for any of them, so generally
108 * devices may be assumed to be functional or to respond to runtime resume
109 * requests while @prepare() is being executed. However, device drivers
110 * may NOT assume anything about the availability of user space at that
111 * time and it is NOT valid to request firmware from within @prepare()
112 * (it's too late to do that). It also is NOT valid to allocate
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100113 * substantial amounts of memory from @prepare() in the GFP_KERNEL mode.
114 * [To work around these limitations, drivers may register suspend and
115 * hibernation notifiers to be executed before the freezing of tasks.]
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200116 *
117 * @complete: Undo the changes made by @prepare(). This method is executed for
118 * all kinds of resume transitions, following one of the resume callbacks:
119 * @resume(), @thaw(), @restore(). Also called if the state transition
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100120 * fails before the driver's suspend callback: @suspend(), @freeze() or
121 * @poweroff(), can be executed (e.g. if the suspend callback fails for one
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200122 * of the other devices that the PM core has unsuccessfully attempted to
123 * suspend earlier).
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100124 * The PM core executes subsystem-level @complete() after it has executed
Rafael J. Wysockiaae45182014-05-16 02:46:50 +0200125 * the appropriate resume callbacks for all devices. If the corresponding
126 * @prepare() at the beginning of the suspend transition returned a
127 * positive number and the device was left in runtime suspend (without
128 * executing any suspend and resume callbacks for it), @complete() will be
129 * the only callback executed for the device during resume. In that case,
130 * @complete() must be prepared to do whatever is necessary to ensure the
131 * proper functioning of the device after the system resume. To this end,
132 * @complete() can check the power.direct_complete flag of the device to
133 * learn whether (unset) or not (set) the previous suspend and resume
134 * callbacks have been executed for it.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200135 *
136 * @suspend: Executed before putting the system into a sleep state in which the
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100137 * contents of main memory are preserved. The exact action to perform
138 * depends on the device's subsystem (PM domain, device type, class or bus
139 * type), but generally the device must be quiescent after subsystem-level
140 * @suspend() has returned, so that it doesn't do any I/O or DMA.
141 * Subsystem-level @suspend() is executed for all devices after invoking
142 * subsystem-level @prepare() for all of them.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200143 *
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100144 * @suspend_late: Continue operations started by @suspend(). For a number of
145 * devices @suspend_late() may point to the same callback routine as the
146 * runtime suspend callback.
147 *
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200148 * @resume: Executed after waking the system up from a sleep state in which the
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100149 * contents of main memory were preserved. The exact action to perform
150 * depends on the device's subsystem, but generally the driver is expected
151 * to start working again, responding to hardware events and software
152 * requests (the device itself may be left in a low-power state, waiting
153 * for a runtime resume to occur). The state of the device at the time its
154 * driver's @resume() callback is run depends on the platform and subsystem
155 * the device belongs to. On most platforms, there are no restrictions on
156 * availability of resources like clocks during @resume().
157 * Subsystem-level @resume() is executed for all devices after invoking
158 * subsystem-level @resume_noirq() for all of them.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200159 *
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100160 * @resume_early: Prepare to execute @resume(). For a number of devices
161 * @resume_early() may point to the same callback routine as the runtime
162 * resume callback.
163 *
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200164 * @freeze: Hibernation-specific, executed before creating a hibernation image.
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100165 * Analogous to @suspend(), but it should not enable the device to signal
166 * wakeup events or change its power state. The majority of subsystems
167 * (with the notable exception of the PCI bus type) expect the driver-level
168 * @freeze() to save the device settings in memory to be used by @restore()
169 * during the subsequent resume from hibernation.
170 * Subsystem-level @freeze() is executed for all devices after invoking
171 * subsystem-level @prepare() for all of them.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200172 *
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100173 * @freeze_late: Continue operations started by @freeze(). Analogous to
174 * @suspend_late(), but it should not enable the device to signal wakeup
175 * events or change its power state.
176 *
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200177 * @thaw: Hibernation-specific, executed after creating a hibernation image OR
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100178 * if the creation of an image has failed. Also executed after a failing
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200179 * attempt to restore the contents of main memory from such an image.
180 * Undo the changes made by the preceding @freeze(), so the device can be
181 * operated in the same way as immediately before the call to @freeze().
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100182 * Subsystem-level @thaw() is executed for all devices after invoking
183 * subsystem-level @thaw_noirq() for all of them. It also may be executed
184 * directly after @freeze() in case of a transition error.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200185 *
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100186 * @thaw_early: Prepare to execute @thaw(). Undo the changes made by the
187 * preceding @freeze_late().
188 *
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200189 * @poweroff: Hibernation-specific, executed after saving a hibernation image.
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100190 * Analogous to @suspend(), but it need not save the device's settings in
191 * memory.
192 * Subsystem-level @poweroff() is executed for all devices after invoking
193 * subsystem-level @prepare() for all of them.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200194 *
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100195 * @poweroff_late: Continue operations started by @poweroff(). Analogous to
196 * @suspend_late(), but it need not save the device's settings in memory.
197 *
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200198 * @restore: Hibernation-specific, executed after restoring the contents of main
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100199 * memory from a hibernation image, analogous to @resume().
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200200 *
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100201 * @restore_early: Prepare to execute @restore(), analogous to @resume_early().
202 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100203 * @suspend_noirq: Complete the actions started by @suspend(). Carry out any
204 * additional operations required for suspending the device that might be
205 * racing with its driver's interrupt handler, which is guaranteed not to
206 * run while @suspend_noirq() is being executed.
207 * It generally is expected that the device will be in a low-power state
208 * (appropriate for the target system sleep state) after subsystem-level
209 * @suspend_noirq() has returned successfully. If the device can generate
210 * system wakeup signals and is enabled to wake up the system, it should be
211 * configured to do so at that time. However, depending on the platform
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100212 * and device's subsystem, @suspend() or @suspend_late() may be allowed to
213 * put the device into the low-power state and configure it to generate
214 * wakeup signals, in which case it generally is not necessary to define
215 * @suspend_noirq().
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200216 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100217 * @resume_noirq: Prepare for the execution of @resume() by carrying out any
218 * operations required for resuming the device that might be racing with
219 * its driver's interrupt handler, which is guaranteed not to run while
220 * @resume_noirq() is being executed.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200221 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100222 * @freeze_noirq: Complete the actions started by @freeze(). Carry out any
223 * additional operations required for freezing the device that might be
224 * racing with its driver's interrupt handler, which is guaranteed not to
225 * run while @freeze_noirq() is being executed.
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100226 * The power state of the device should not be changed by either @freeze(),
227 * or @freeze_late(), or @freeze_noirq() and it should not be configured to
228 * signal system wakeup by any of these callbacks.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200229 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100230 * @thaw_noirq: Prepare for the execution of @thaw() by carrying out any
231 * operations required for thawing the device that might be racing with its
232 * driver's interrupt handler, which is guaranteed not to run while
233 * @thaw_noirq() is being executed.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200234 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100235 * @poweroff_noirq: Complete the actions started by @poweroff(). Analogous to
236 * @suspend_noirq(), but it need not save the device's settings in memory.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200237 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100238 * @restore_noirq: Prepare for the execution of @restore() by carrying out any
239 * operations required for thawing the device that might be racing with its
240 * driver's interrupt handler, which is guaranteed not to run while
241 * @restore_noirq() is being executed. Analogous to @resume_noirq().
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200242 *
Rafael J. Wysockiadf09492008-10-06 22:46:05 +0200243 * All of the above callbacks, except for @complete(), return error codes.
244 * However, the error codes returned by the resume operations, @resume(),
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100245 * @thaw(), @restore(), @resume_noirq(), @thaw_noirq(), and @restore_noirq(), do
Rafael J. Wysockiadf09492008-10-06 22:46:05 +0200246 * not cause the PM core to abort the resume transition during which they are
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100247 * returned. The error codes returned in those cases are only printed by the PM
Rafael J. Wysockiadf09492008-10-06 22:46:05 +0200248 * core to the system logs for debugging purposes. Still, it is recommended
249 * that drivers only return error codes from their resume methods in case of an
250 * unrecoverable failure (i.e. when the device being handled refuses to resume
251 * and becomes unusable) to allow us to modify the PM core in the future, so
252 * that it can avoid attempting to handle devices that failed to resume and
253 * their children.
254 *
255 * It is allowed to unregister devices while the above callbacks are being
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100256 * executed. However, a callback routine must NOT try to unregister the device
257 * it was called for, although it may unregister children of that device (for
258 * example, if it detects that a child was unplugged while the system was
259 * asleep).
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200260 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100261 * Refer to Documentation/power/devices.txt for more information about the role
262 * of the above callbacks in the system suspend process.
263 *
264 * There also are callbacks related to runtime power management of devices.
265 * Again, these callbacks are executed by the PM core only for subsystems
266 * (PM domains, device types, classes and bus types) and the subsystem-level
267 * callbacks are supposed to invoke the driver callbacks. Moreover, the exact
268 * actions to be performed by a device driver's callbacks generally depend on
269 * the platform and subsystem the device belongs to.
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200270 *
271 * @runtime_suspend: Prepare the device for a condition in which it won't be
272 * able to communicate with the CPU(s) and RAM due to power management.
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100273 * This need not mean that the device should be put into a low-power state.
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200274 * For example, if the device is behind a link which is about to be turned
275 * off, the device may remain at full power. If the device does go to low
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100276 * power and is capable of generating runtime wakeup events, remote wakeup
277 * (i.e., a hardware mechanism allowing the device to request a change of
278 * its power state via an interrupt) should be enabled for it.
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200279 *
280 * @runtime_resume: Put the device into the fully active state in response to a
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100281 * wakeup event generated by hardware or at the request of software. If
282 * necessary, put the device into the full-power state and restore its
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200283 * registers, so that it is fully operational.
284 *
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100285 * @runtime_idle: Device appears to be inactive and it might be put into a
Geert Uytterhoeven651665d2014-03-17 21:26:11 +0100286 * low-power state if all of the necessary conditions are satisfied.
287 * Check these conditions, and return 0 if it's appropriate to let the PM
288 * core queue a suspend request for the device.
Rafael J. Wysockif7bc83d2011-11-23 21:20:32 +0100289 *
290 * Refer to Documentation/power/runtime_pm.txt for more information about the
291 * role of the above callbacks in device runtime power management.
292 *
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200293 */
294
Rafael J. Wysockiadf09492008-10-06 22:46:05 +0200295struct dev_pm_ops {
296 int (*prepare)(struct device *dev);
297 void (*complete)(struct device *dev);
298 int (*suspend)(struct device *dev);
299 int (*resume)(struct device *dev);
300 int (*freeze)(struct device *dev);
301 int (*thaw)(struct device *dev);
302 int (*poweroff)(struct device *dev);
303 int (*restore)(struct device *dev);
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100304 int (*suspend_late)(struct device *dev);
305 int (*resume_early)(struct device *dev);
306 int (*freeze_late)(struct device *dev);
307 int (*thaw_early)(struct device *dev);
308 int (*poweroff_late)(struct device *dev);
309 int (*restore_early)(struct device *dev);
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200310 int (*suspend_noirq)(struct device *dev);
311 int (*resume_noirq)(struct device *dev);
312 int (*freeze_noirq)(struct device *dev);
313 int (*thaw_noirq)(struct device *dev);
314 int (*poweroff_noirq)(struct device *dev);
315 int (*restore_noirq)(struct device *dev);
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200316 int (*runtime_suspend)(struct device *dev);
317 int (*runtime_resume)(struct device *dev);
318 int (*runtime_idle)(struct device *dev);
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200319};
320
Rafael J. Wysockid690b2c2010-03-06 21:28:37 +0100321#ifdef CONFIG_PM_SLEEP
322#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
323 .suspend = suspend_fn, \
324 .resume = resume_fn, \
325 .freeze = suspend_fn, \
326 .thaw = resume_fn, \
327 .poweroff = suspend_fn, \
328 .restore = resume_fn,
329#else
330#define SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
331#endif
332
Ulf Hanssonf78c4cf2013-12-10 14:37:42 +0100333#ifdef CONFIG_PM_SLEEP
334#define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
335 .suspend_late = suspend_fn, \
336 .resume_early = resume_fn, \
337 .freeze_late = suspend_fn, \
338 .thaw_early = resume_fn, \
339 .poweroff_late = suspend_fn, \
340 .restore_early = resume_fn,
341#else
342#define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
343#endif
344
Grygorii Strashko020af892015-04-27 21:24:30 +0300345#ifdef CONFIG_PM_SLEEP
346#define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
347 .suspend_noirq = suspend_fn, \
348 .resume_noirq = resume_fn, \
349 .freeze_noirq = suspend_fn, \
350 .thaw_noirq = resume_fn, \
351 .poweroff_noirq = suspend_fn, \
352 .restore_noirq = resume_fn,
353#else
354#define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
355#endif
356
Rafael J. Wysocki6ed23b82014-12-04 00:34:11 +0100357#ifdef CONFIG_PM
Rafael J. Wysockid690b2c2010-03-06 21:28:37 +0100358#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
359 .runtime_suspend = suspend_fn, \
360 .runtime_resume = resume_fn, \
361 .runtime_idle = idle_fn,
362#else
363#define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn)
364#endif
365
Albin Tonnerre9d62ec62009-08-05 23:59:59 +0200366/*
367 * Use this if you want to use the same suspend and resume callbacks for suspend
368 * to RAM and hibernation.
369 */
370#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
Alexey Dobriyan47145212009-12-14 18:00:08 -0800371const struct dev_pm_ops name = { \
Rafael J. Wysockid690b2c2010-03-06 21:28:37 +0100372 SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
Albin Tonnerre9d62ec62009-08-05 23:59:59 +0200373}
374
Rafael J. Wysockid690b2c2010-03-06 21:28:37 +0100375/*
376 * Use this for defining a set of PM operations to be used in all situations
Lad, Prabhakar3e54d152014-02-20 13:30:32 +0530377 * (system suspend, hibernation or runtime PM).
Rafael J. Wysockic4882522012-02-13 16:29:47 +0100378 * NOTE: In general, system suspend callbacks, .suspend() and .resume(), should
379 * be different from the corresponding runtime PM callbacks, .runtime_suspend(),
380 * and .runtime_resume(), because .runtime_suspend() always works on an already
381 * quiescent device, while .suspend() should assume that the device may be doing
382 * something when it is called (it should ensure that the device will be
383 * quiescent after it has returned). Therefore it's better to point the "late"
384 * suspend and "early" resume callback pointers, .suspend_late() and
385 * .resume_early(), to the same routines as .runtime_suspend() and
386 * .runtime_resume(), respectively (and analogously for hibernation).
Rafael J. Wysockid690b2c2010-03-06 21:28:37 +0100387 */
388#define UNIVERSAL_DEV_PM_OPS(name, suspend_fn, resume_fn, idle_fn) \
389const struct dev_pm_ops name = { \
390 SET_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
391 SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
392}
393
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200394/**
395 * PM_EVENT_ messages
396 *
397 * The following PM_EVENT_ messages are defined for the internal use of the PM
398 * core, in order to provide a mechanism allowing the high level suspend and
399 * hibernation code to convey the necessary information to the device PM core
400 * code:
401 *
402 * ON No transition.
403 *
Geert Uytterhoeven33fe0ad2014-03-17 21:26:10 +0100404 * FREEZE System is going to hibernate, call ->prepare() and ->freeze()
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200405 * for all devices.
406 *
407 * SUSPEND System is going to suspend, call ->prepare() and ->suspend()
408 * for all devices.
409 *
410 * HIBERNATE Hibernation image has been saved, call ->prepare() and
411 * ->poweroff() for all devices.
412 *
413 * QUIESCE Contents of main memory are going to be restored from a (loaded)
414 * hibernation image, call ->prepare() and ->freeze() for all
415 * devices.
416 *
417 * RESUME System is resuming, call ->resume() and ->complete() for all
418 * devices.
419 *
420 * THAW Hibernation image has been created, call ->thaw() and
421 * ->complete() for all devices.
422 *
423 * RESTORE Contents of main memory have been restored from a hibernation
424 * image, call ->restore() and ->complete() for all devices.
425 *
426 * RECOVER Creation of a hibernation image or restoration of the main
427 * memory contents from a hibernation image has failed, call
428 * ->thaw() and ->complete() for all devices.
Alan Stern8111d1b2008-07-23 21:28:37 -0700429 *
430 * The following PM_EVENT_ messages are defined for internal use by
431 * kernel subsystems. They are never issued by the PM core.
432 *
433 * USER_SUSPEND Manual selective suspend was issued by userspace.
434 *
435 * USER_RESUME Manual selective resume was issued by userspace.
436 *
437 * REMOTE_WAKEUP Remote-wakeup request was received from the device.
438 *
439 * AUTO_SUSPEND Automatic (device idle) runtime suspend was
440 * initiated by the subsystem.
441 *
442 * AUTO_RESUME Automatic (device needed) runtime resume was
443 * requested by a driver.
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200444 */
445
Rafael J. Wysocki1a9a9152011-09-29 22:29:44 +0200446#define PM_EVENT_INVALID (-1)
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200447#define PM_EVENT_ON 0x0000
Geert Uytterhoeven33fe0ad2014-03-17 21:26:10 +0100448#define PM_EVENT_FREEZE 0x0001
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200449#define PM_EVENT_SUSPEND 0x0002
450#define PM_EVENT_HIBERNATE 0x0004
451#define PM_EVENT_QUIESCE 0x0008
452#define PM_EVENT_RESUME 0x0010
453#define PM_EVENT_THAW 0x0020
454#define PM_EVENT_RESTORE 0x0040
455#define PM_EVENT_RECOVER 0x0080
Alan Stern8111d1b2008-07-23 21:28:37 -0700456#define PM_EVENT_USER 0x0100
457#define PM_EVENT_REMOTE 0x0200
458#define PM_EVENT_AUTO 0x0400
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200459
Alan Stern8111d1b2008-07-23 21:28:37 -0700460#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
461#define PM_EVENT_USER_SUSPEND (PM_EVENT_USER | PM_EVENT_SUSPEND)
462#define PM_EVENT_USER_RESUME (PM_EVENT_USER | PM_EVENT_RESUME)
Alan Stern7f4f5d42008-11-17 11:14:19 -0500463#define PM_EVENT_REMOTE_RESUME (PM_EVENT_REMOTE | PM_EVENT_RESUME)
Alan Stern8111d1b2008-07-23 21:28:37 -0700464#define PM_EVENT_AUTO_SUSPEND (PM_EVENT_AUTO | PM_EVENT_SUSPEND)
465#define PM_EVENT_AUTO_RESUME (PM_EVENT_AUTO | PM_EVENT_RESUME)
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200466
Rafael J. Wysocki1a9a9152011-09-29 22:29:44 +0200467#define PMSG_INVALID ((struct pm_message){ .event = PM_EVENT_INVALID, })
Alan Stern8111d1b2008-07-23 21:28:37 -0700468#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200469#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
470#define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, })
471#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
472#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
473#define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, })
474#define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, })
475#define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, })
476#define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, })
Alan Stern7f4f5d42008-11-17 11:14:19 -0500477#define PMSG_USER_SUSPEND ((struct pm_message) \
Alan Stern8111d1b2008-07-23 21:28:37 -0700478 { .event = PM_EVENT_USER_SUSPEND, })
Alan Stern7f4f5d42008-11-17 11:14:19 -0500479#define PMSG_USER_RESUME ((struct pm_message) \
Alan Stern8111d1b2008-07-23 21:28:37 -0700480 { .event = PM_EVENT_USER_RESUME, })
Alan Stern7f4f5d42008-11-17 11:14:19 -0500481#define PMSG_REMOTE_RESUME ((struct pm_message) \
Alan Stern8111d1b2008-07-23 21:28:37 -0700482 { .event = PM_EVENT_REMOTE_RESUME, })
Alan Stern7f4f5d42008-11-17 11:14:19 -0500483#define PMSG_AUTO_SUSPEND ((struct pm_message) \
Alan Stern8111d1b2008-07-23 21:28:37 -0700484 { .event = PM_EVENT_AUTO_SUSPEND, })
Alan Stern7f4f5d42008-11-17 11:14:19 -0500485#define PMSG_AUTO_RESUME ((struct pm_message) \
Alan Stern8111d1b2008-07-23 21:28:37 -0700486 { .event = PM_EVENT_AUTO_RESUME, })
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200487
Alan Stern5b1b0b82011-08-19 23:49:48 +0200488#define PMSG_IS_AUTO(msg) (((msg).event & PM_EVENT_AUTO) != 0)
489
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200490/**
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200491 * Device run-time power management status.
492 *
493 * These status labels are used internally by the PM core to indicate the
494 * current status of a device with respect to the PM core operations. They do
495 * not reflect the actual power state of the device or its status as seen by the
496 * driver.
497 *
498 * RPM_ACTIVE Device is fully operational. Indicates that the device
499 * bus type's ->runtime_resume() callback has completed
500 * successfully.
501 *
502 * RPM_SUSPENDED Device bus type's ->runtime_suspend() callback has
503 * completed successfully. The device is regarded as
504 * suspended.
505 *
506 * RPM_RESUMING Device bus type's ->runtime_resume() callback is being
507 * executed.
508 *
509 * RPM_SUSPENDING Device bus type's ->runtime_suspend() callback is being
510 * executed.
511 */
512
513enum rpm_status {
514 RPM_ACTIVE = 0,
515 RPM_RESUMING,
516 RPM_SUSPENDED,
517 RPM_SUSPENDING,
518};
519
520/**
521 * Device run-time power management request types.
522 *
523 * RPM_REQ_NONE Do nothing.
524 *
525 * RPM_REQ_IDLE Run the device bus type's ->runtime_idle() callback
526 *
527 * RPM_REQ_SUSPEND Run the device bus type's ->runtime_suspend() callback
528 *
Alan Stern15bcb91d2010-09-25 23:35:21 +0200529 * RPM_REQ_AUTOSUSPEND Same as RPM_REQ_SUSPEND, but not until the device has
530 * been inactive for as long as power.autosuspend_delay
531 *
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200532 * RPM_REQ_RESUME Run the device bus type's ->runtime_resume() callback
533 */
534
535enum rpm_request {
536 RPM_REQ_NONE = 0,
537 RPM_REQ_IDLE,
538 RPM_REQ_SUSPEND,
Alan Stern15bcb91d2010-09-25 23:35:21 +0200539 RPM_REQ_AUTOSUSPEND,
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200540 RPM_REQ_RESUME,
541};
542
Rafael J. Wysocki074037e2010-09-22 22:09:10 +0200543struct wakeup_source;
Tony Lindgren4990d4f2015-05-18 15:40:29 -0700544struct wake_irq;
Ulf Hansson00e7c292014-11-14 08:41:32 +0100545struct pm_domain_data;
Rafael J. Wysocki4605ab62011-08-25 15:34:12 +0200546
Rafael J. Wysocki5c095a02011-08-25 15:33:50 +0200547struct pm_subsys_data {
548 spinlock_t lock;
Rafael J. Wysockief27bed2011-08-25 15:34:01 +0200549 unsigned int refcount;
Rafael J. Wysocki5c095a02011-08-25 15:33:50 +0200550#ifdef CONFIG_PM_CLK
551 struct list_head clock_list;
552#endif
Rafael J. Wysocki4605ab62011-08-25 15:34:12 +0200553#ifdef CONFIG_PM_GENERIC_DOMAINS
Rafael J. Wysockicd0ea672011-09-26 20:22:02 +0200554 struct pm_domain_data *domain_data;
Rafael J. Wysocki4605ab62011-08-25 15:34:12 +0200555#endif
Rafael J. Wysocki5c095a02011-08-25 15:33:50 +0200556};
557
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200558struct dev_pm_info {
559 pm_message_t power_state;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200560 unsigned int can_wakeup:1;
Rafael J. Wysockib8c76f62010-12-16 00:51:21 +0100561 unsigned int async_suspend:1;
Alan Sternf76b168b2011-06-18 20:22:23 +0200562 bool is_prepared:1; /* Owned by the PM core */
Alan Stern6d0e0e82011-06-18 22:42:09 +0200563 bool is_suspended:1; /* Ditto */
Liu, Chuansheng3d2699b2014-02-18 10:28:44 +0800564 bool is_noirq_suspended:1;
565 bool is_late_suspended:1;
Rafael J. Wysocki8b258cc2011-11-17 21:39:33 +0100566 bool ignore_children:1;
Rafael J. Wysockibed2b422012-08-06 01:45:11 +0200567 bool early_init:1; /* Owned by the PM core */
Rafael J. Wysockiaae45182014-05-16 02:46:50 +0200568 bool direct_complete:1; /* Owned by the PM core */
Rafael J. Wysocki074037e2010-09-22 22:09:10 +0200569 spinlock_t lock;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200570#ifdef CONFIG_PM_SLEEP
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200571 struct list_head entry;
Rafael J. Wysocki5af84b82010-01-23 22:23:32 +0100572 struct completion completion;
Rafael J. Wysocki074037e2010-09-22 22:09:10 +0200573 struct wakeup_source *wakeup;
Rafael J. Wysocki4ca46ff2011-10-16 23:34:36 +0200574 bool wakeup_path:1;
Rafael J. Wysockifeb70af2012-08-13 14:00:25 +0200575 bool syscore:1;
Rafael J. Wysocki805bdae2011-02-24 11:10:01 +0100576#else
577 unsigned int should_wakeup:1;
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200578#endif
Rafael J. Wysockid30d8192014-11-27 22:38:05 +0100579#ifdef CONFIG_PM
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200580 struct timer_list suspend_timer;
581 unsigned long timer_expires;
582 struct work_struct work;
583 wait_queue_head_t wait_queue;
Tony Lindgren4990d4f2015-05-18 15:40:29 -0700584 struct wake_irq *wakeirq;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200585 atomic_t usage_count;
586 atomic_t child_count;
587 unsigned int disable_depth:3;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200588 unsigned int idle_notification:1;
589 unsigned int request_pending:1;
590 unsigned int deferred_resume:1;
Rafael J. Wysocki7a1a8eb2009-12-03 21:19:18 +0100591 unsigned int run_wake:1;
Rafael J. Wysocki53823632010-01-23 22:02:51 +0100592 unsigned int runtime_auto:1;
Alan Stern7490e442010-09-25 23:35:15 +0200593 unsigned int no_callbacks:1;
Alan Sternc7b61de2010-12-01 00:14:42 +0100594 unsigned int irq_safe:1;
Alan Stern15bcb91d2010-09-25 23:35:21 +0200595 unsigned int use_autosuspend:1;
596 unsigned int timer_autosuspends:1;
Ming Leie8234072013-02-22 16:34:11 -0800597 unsigned int memalloc_noio:1;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200598 enum rpm_request request;
599 enum rpm_status runtime_status;
600 int runtime_error;
Alan Stern15bcb91d2010-09-25 23:35:21 +0200601 int autosuspend_delay;
602 unsigned long last_busy;
Arjan van de Ven8d4b9d12010-07-19 02:01:06 +0200603 unsigned long active_jiffies;
604 unsigned long suspended_jiffies;
605 unsigned long accounting_timestamp;
Rafael J. Wysocki5e928f72009-08-18 23:38:32 +0200606#endif
Rafael J. Wysocki5c095a02011-08-25 15:33:50 +0200607 struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */
Rafael J. Wysocki2d984ad2014-02-11 00:35:38 +0100608 void (*set_latency_tolerance)(struct device *, s32);
Rafael J. Wysocki5f986c52012-10-23 01:07:27 +0200609 struct dev_pm_qos *qos;
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200610};
611
Arjan van de Ven8d4b9d12010-07-19 02:01:06 +0200612extern void update_pm_runtime_accounting(struct device *dev);
Rafael J. Wysockief27bed2011-08-25 15:34:01 +0200613extern int dev_pm_get_subsys_data(struct device *dev);
Ulf Hansson1e95e3b2015-01-29 18:39:05 +0100614extern void dev_pm_put_subsys_data(struct device *dev);
Arjan van de Ven8d4b9d12010-07-19 02:01:06 +0200615
Rafael J. Wysocki7538e3d2011-02-16 21:53:17 +0100616/*
617 * Power domains provide callbacks that are executed during system suspend,
618 * hibernation, system resume and during runtime PM transitions along with
619 * subsystem-level and driver-level callbacks.
Rafael J. Wysockie90d5532015-03-20 13:59:27 +0100620 *
621 * @detach: Called when removing a device from the domain.
622 * @activate: Called before executing probe routines for bus types and drivers.
623 * @sync: Called after successful driver probe.
624 * @dismiss: Called after unsuccessful driver probe and after driver removal.
Rafael J. Wysocki7538e3d2011-02-16 21:53:17 +0100625 */
Rafael J. Wysocki564b9052011-06-23 01:52:55 +0200626struct dev_pm_domain {
Rafael J. Wysocki7538e3d2011-02-16 21:53:17 +0100627 struct dev_pm_ops ops;
Ulf Hanssonc3099a52014-09-19 20:27:34 +0200628 void (*detach)(struct device *dev, bool power_off);
Rafael J. Wysockie90d5532015-03-20 13:59:27 +0100629 int (*activate)(struct device *dev);
630 void (*sync)(struct device *dev);
631 void (*dismiss)(struct device *dev);
Rafael J. Wysocki7538e3d2011-02-16 21:53:17 +0100632};
Arjan van de Ven8d4b9d12010-07-19 02:01:06 +0200633
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200634/*
635 * The PM_EVENT_ messages are also used by drivers implementing the legacy
636 * suspend framework, based on the ->suspend() and ->resume() callbacks common
637 * for suspend and hibernation transitions, according to the rules below.
638 */
639
640/* Necessary, because several drivers use PM_EVENT_PRETHAW */
641#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
642
643/*
David Brownell82bb67f2006-08-14 23:11:04 -0700644 * One transition is triggered by resume(), after a suspend() call; the
645 * message is implicit:
646 *
647 * ON Driver starts working again, responding to hardware events
Geert Uytterhoeven33fe0ad2014-03-17 21:26:10 +0100648 * and software requests. The hardware may have gone through
649 * a power-off reset, or it may have maintained state from the
650 * previous suspend() which the driver will rely on while
651 * resuming. On most platforms, there are no restrictions on
652 * availability of resources like clocks during resume().
David Brownell82bb67f2006-08-14 23:11:04 -0700653 *
654 * Other transitions are triggered by messages sent using suspend(). All
655 * these transitions quiesce the driver, so that I/O queues are inactive.
656 * That commonly entails turning off IRQs and DMA; there may be rules
657 * about how to quiesce that are specific to the bus or the device's type.
658 * (For example, network drivers mark the link state.) Other details may
659 * differ according to the message:
660 *
661 * SUSPEND Quiesce, enter a low power device state appropriate for
Geert Uytterhoeven33fe0ad2014-03-17 21:26:10 +0100662 * the upcoming system state (such as PCI_D3hot), and enable
663 * wakeup events as appropriate.
David Brownell82bb67f2006-08-14 23:11:04 -0700664 *
Rafael J. Wysocki3a2d5b72008-02-23 19:13:25 +0100665 * HIBERNATE Enter a low power device state appropriate for the hibernation
Geert Uytterhoeven33fe0ad2014-03-17 21:26:10 +0100666 * state (eg. ACPI S4) and enable wakeup events as appropriate.
Rafael J. Wysocki3a2d5b72008-02-23 19:13:25 +0100667 *
David Brownell82bb67f2006-08-14 23:11:04 -0700668 * FREEZE Quiesce operations so that a consistent image can be saved;
Geert Uytterhoeven33fe0ad2014-03-17 21:26:10 +0100669 * but do NOT otherwise enter a low power device state, and do
670 * NOT emit system wakeup events.
David Brownell82bb67f2006-08-14 23:11:04 -0700671 *
672 * PRETHAW Quiesce as if for FREEZE; additionally, prepare for restoring
Geert Uytterhoeven33fe0ad2014-03-17 21:26:10 +0100673 * the system from a snapshot taken after an earlier FREEZE.
674 * Some drivers will need to reset their hardware state instead
675 * of preserving it, to ensure that it's never mistaken for the
676 * state which that earlier snapshot had set up.
David Brownell82bb67f2006-08-14 23:11:04 -0700677 *
678 * A minimally power-aware driver treats all messages as SUSPEND, fully
679 * reinitializes its device during resume() -- whether or not it was reset
680 * during the suspend/resume cycle -- and can't issue wakeup events.
681 *
682 * More power-aware drivers may also use low power states at runtime as
683 * well as during system sleep states like PM_SUSPEND_STANDBY. They may
684 * be able to use wakeup events to exit from runtime low-power states,
685 * or from system low-power states such as standby or suspend-to-RAM.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700686 */
687
Rafael J. Wysocki296699d2007-07-29 23:27:18 +0200688#ifdef CONFIG_PM_SLEEP
Rafael J. Wysockid47d81c2011-03-23 22:16:41 +0100689extern void device_pm_lock(void);
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100690extern void dpm_resume_start(pm_message_t state);
Alan Sternd1616302009-05-24 22:05:42 +0200691extern void dpm_resume_end(pm_message_t state);
Rafael J. Wysocki2a8a8ce2014-09-30 02:21:34 +0200692extern void dpm_resume_noirq(pm_message_t state);
693extern void dpm_resume_early(pm_message_t state);
Rafael J. Wysocki91e7c752011-05-17 23:26:00 +0200694extern void dpm_resume(pm_message_t state);
695extern void dpm_complete(pm_message_t state);
Rafael J. Wysocki1eede072008-05-20 23:00:01 +0200696
697extern void device_pm_unlock(void);
Rafael J. Wysockicf579df2012-01-29 20:38:29 +0100698extern int dpm_suspend_end(pm_message_t state);
Alan Sternd1616302009-05-24 22:05:42 +0200699extern int dpm_suspend_start(pm_message_t state);
Rafael J. Wysocki2a8a8ce2014-09-30 02:21:34 +0200700extern int dpm_suspend_noirq(pm_message_t state);
701extern int dpm_suspend_late(pm_message_t state);
Rafael J. Wysocki91e7c752011-05-17 23:26:00 +0200702extern int dpm_suspend(pm_message_t state);
703extern int dpm_prepare(pm_message_t state);
David Brownell0ac85242005-09-12 19:39:34 -0700704
Andrew Morton02669492006-03-23 01:38:34 -0800705extern void __suspend_report_result(const char *function, void *fn, int ret);
706
707#define suspend_report_result(fn, ret) \
708 do { \
Harvey Harrisond5c003b2008-10-15 22:01:24 -0700709 __suspend_report_result(__func__, fn, ret); \
Andrew Morton02669492006-03-23 01:38:34 -0800710 } while (0)
Andrew Morton9a7834d2005-10-23 23:02:20 -0700711
Rafael J. Wysocki098dff72010-09-22 22:10:57 +0200712extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
Ming Leidfe32122012-08-17 22:06:59 +0800713extern void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *));
Rafael J. Wysocki6538df82011-05-17 23:26:21 +0200714
715extern int pm_generic_prepare(struct device *dev);
Rafael J. Wysockie470d062012-01-29 20:38:41 +0100716extern int pm_generic_suspend_late(struct device *dev);
Rafael J. Wysockie5291922011-07-01 22:12:59 +0200717extern int pm_generic_suspend_noirq(struct device *dev);
Rafael J. Wysocki6538df82011-05-17 23:26:21 +0200718extern int pm_generic_suspend(struct device *dev);
Rafael J. Wysockie470d062012-01-29 20:38:41 +0100719extern int pm_generic_resume_early(struct device *dev);
Rafael J. Wysockie5291922011-07-01 22:12:59 +0200720extern int pm_generic_resume_noirq(struct device *dev);
Rafael J. Wysocki6538df82011-05-17 23:26:21 +0200721extern int pm_generic_resume(struct device *dev);
Rafael J. Wysockie5291922011-07-01 22:12:59 +0200722extern int pm_generic_freeze_noirq(struct device *dev);
Rafael J. Wysockie470d062012-01-29 20:38:41 +0100723extern int pm_generic_freeze_late(struct device *dev);
Rafael J. Wysocki6538df82011-05-17 23:26:21 +0200724extern int pm_generic_freeze(struct device *dev);
Rafael J. Wysockie5291922011-07-01 22:12:59 +0200725extern int pm_generic_thaw_noirq(struct device *dev);
Rafael J. Wysockie470d062012-01-29 20:38:41 +0100726extern int pm_generic_thaw_early(struct device *dev);
Rafael J. Wysocki6538df82011-05-17 23:26:21 +0200727extern int pm_generic_thaw(struct device *dev);
Rafael J. Wysockie5291922011-07-01 22:12:59 +0200728extern int pm_generic_restore_noirq(struct device *dev);
Rafael J. Wysockie470d062012-01-29 20:38:41 +0100729extern int pm_generic_restore_early(struct device *dev);
Rafael J. Wysocki6538df82011-05-17 23:26:21 +0200730extern int pm_generic_restore(struct device *dev);
Rafael J. Wysockie5291922011-07-01 22:12:59 +0200731extern int pm_generic_poweroff_noirq(struct device *dev);
Rafael J. Wysockie470d062012-01-29 20:38:41 +0100732extern int pm_generic_poweroff_late(struct device *dev);
Rafael J. Wysocki6538df82011-05-17 23:26:21 +0200733extern int pm_generic_poweroff(struct device *dev);
734extern void pm_generic_complete(struct device *dev);
735
Alan Sternd288e472008-03-19 22:37:42 +0100736#else /* !CONFIG_PM_SLEEP */
737
Cornelia Huckffa6a702009-03-04 12:44:00 +0100738#define device_pm_lock() do {} while (0)
739#define device_pm_unlock() do {} while (0)
740
Alan Sternd1616302009-05-24 22:05:42 +0200741static inline int dpm_suspend_start(pm_message_t state)
Alan Sternd288e472008-03-19 22:37:42 +0100742{
743 return 0;
744}
745
Alan Stern9a3df1f2008-03-19 22:39:13 +0100746#define suspend_report_result(fn, ret) do {} while (0)
Alan Sternd288e472008-03-19 22:37:42 +0100747
Rafael J. Wysocki098dff72010-09-22 22:10:57 +0200748static inline int device_pm_wait_for_dev(struct device *a, struct device *b)
749{
750 return 0;
751}
Rafael J. Wysocki6538df82011-05-17 23:26:21 +0200752
Ming Leidfe32122012-08-17 22:06:59 +0800753static inline void dpm_for_each_dev(void *data, void (*fn)(struct device *, void *))
754{
755}
756
Ulf Hansson0a9efc42014-02-19 13:09:21 +0100757#define pm_generic_prepare NULL
758#define pm_generic_suspend_late NULL
759#define pm_generic_suspend_noirq NULL
760#define pm_generic_suspend NULL
761#define pm_generic_resume_early NULL
762#define pm_generic_resume_noirq NULL
763#define pm_generic_resume NULL
764#define pm_generic_freeze_noirq NULL
765#define pm_generic_freeze_late NULL
766#define pm_generic_freeze NULL
767#define pm_generic_thaw_noirq NULL
768#define pm_generic_thaw_early NULL
769#define pm_generic_thaw NULL
770#define pm_generic_restore_noirq NULL
771#define pm_generic_restore_early NULL
772#define pm_generic_restore NULL
773#define pm_generic_poweroff_noirq NULL
774#define pm_generic_poweroff_late NULL
775#define pm_generic_poweroff NULL
776#define pm_generic_complete NULL
Alan Sternd288e472008-03-19 22:37:42 +0100777#endif /* !CONFIG_PM_SLEEP */
778
Cornelia Huckffa6a702009-03-04 12:44:00 +0100779/* How to reorder dpm_list after device_move() */
780enum dpm_order {
781 DPM_ORDER_NONE,
782 DPM_ORDER_DEV_AFTER_PARENT,
783 DPM_ORDER_PARENT_BEFORE_DEV,
784 DPM_ORDER_DEV_LAST,
785};
786
Linus Torvalds1da177e2005-04-16 15:20:36 -0700787#endif /* _LINUX_PM_H */