blob: 500f5176b6ba801c3daa81f4d878dadf4a9b418e [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/char/synclink.c
3 *
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08004 * $Id: synclink.c,v 4.38 2005/11/07 16:30:34 paulkf Exp $
Linus Torvalds1da177e2005-04-16 15:20:36 -07005 *
6 * Device driver for Microgate SyncLink ISA and PCI
7 * high speed multiprotocol serial adapters.
8 *
9 * written by Paul Fulghum for Microgate Corporation
10 * paulkf@microgate.com
11 *
12 * Microgate and SyncLink are trademarks of Microgate Corporation
13 *
14 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
15 *
16 * Original release 01/11/99
17 *
18 * This code is released under the GNU General Public License (GPL)
19 *
20 * This driver is primarily intended for use in synchronous
21 * HDLC mode. Asynchronous mode is also provided.
22 *
23 * When operating in synchronous mode, each call to mgsl_write()
24 * contains exactly one complete HDLC frame. Calling mgsl_put_char
25 * will start assembling an HDLC frame that will not be sent until
26 * mgsl_flush_chars or mgsl_write is called.
27 *
28 * Synchronous receive data is reported as complete frames. To accomplish
29 * this, the TTY flip buffer is bypassed (too small to hold largest
30 * frame and may fragment frames) and the line discipline
31 * receive entry point is called directly.
32 *
33 * This driver has been tested with a slightly modified ppp.c driver
34 * for synchronous PPP.
35 *
36 * 2000/02/16
37 * Added interface for syncppp.c driver (an alternate synchronous PPP
38 * implementation that also supports Cisco HDLC). Each device instance
39 * registers as a tty device AND a network device (if dosyncppp option
40 * is set for the device). The functionality is determined by which
41 * device interface is opened.
42 *
43 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
44 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
45 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
46 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
47 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
48 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
49 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
50 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
51 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
52 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
53 * OF THE POSSIBILITY OF SUCH DAMAGE.
54 */
55
56#if defined(__i386__)
57# define BREAKPOINT() asm(" int $3");
58#else
59# define BREAKPOINT() { }
60#endif
61
62#define MAX_ISA_DEVICES 10
63#define MAX_PCI_DEVICES 10
64#define MAX_TOTAL_DEVICES 20
65
Linus Torvalds1da177e2005-04-16 15:20:36 -070066#include <linux/module.h>
67#include <linux/errno.h>
68#include <linux/signal.h>
69#include <linux/sched.h>
70#include <linux/timer.h>
71#include <linux/interrupt.h>
72#include <linux/pci.h>
73#include <linux/tty.h>
74#include <linux/tty_flip.h>
75#include <linux/serial.h>
76#include <linux/major.h>
77#include <linux/string.h>
78#include <linux/fcntl.h>
79#include <linux/ptrace.h>
80#include <linux/ioport.h>
81#include <linux/mm.h>
82#include <linux/slab.h>
83#include <linux/delay.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070084#include <linux/netdevice.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070085#include <linux/vmalloc.h>
86#include <linux/init.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070087#include <linux/ioctl.h>
Robert P. J. Day3dd12472008-02-06 01:37:17 -080088#include <linux/synclink.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070089
90#include <asm/system.h>
91#include <asm/io.h>
92#include <asm/irq.h>
93#include <asm/dma.h>
94#include <linux/bitops.h>
95#include <asm/types.h>
96#include <linux/termios.h>
97#include <linux/workqueue.h>
98#include <linux/hdlc.h>
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -080099#include <linux/dma-mapping.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100
Paul Fulghumaf69c7f2006-12-06 20:40:24 -0800101#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_MODULE))
102#define SYNCLINK_GENERIC_HDLC 1
103#else
104#define SYNCLINK_GENERIC_HDLC 0
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105#endif
106
107#define GET_USER(error,value,addr) error = get_user(value,addr)
108#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
109#define PUT_USER(error,value,addr) error = put_user(value,addr)
110#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
111
112#include <asm/uaccess.h>
113
Linus Torvalds1da177e2005-04-16 15:20:36 -0700114#define RCLRVALUE 0xffff
115
116static MGSL_PARAMS default_params = {
117 MGSL_MODE_HDLC, /* unsigned long mode */
118 0, /* unsigned char loopback; */
119 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
120 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
121 0, /* unsigned long clock_speed; */
122 0xff, /* unsigned char addr_filter; */
123 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
124 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
125 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
126 9600, /* unsigned long data_rate; */
127 8, /* unsigned char data_bits; */
128 1, /* unsigned char stop_bits; */
129 ASYNC_PARITY_NONE /* unsigned char parity; */
130};
131
132#define SHARED_MEM_ADDRESS_SIZE 0x40000
Paul Fulghum623a4392006-10-17 00:09:27 -0700133#define BUFFERLISTSIZE 4096
134#define DMABUFFERSIZE 4096
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135#define MAXRXFRAMES 7
136
137typedef struct _DMABUFFERENTRY
138{
139 u32 phys_addr; /* 32-bit flat physical address of data buffer */
Paul Fulghum4a918bc2005-09-09 13:02:12 -0700140 volatile u16 count; /* buffer size/data count */
141 volatile u16 status; /* Control/status field */
142 volatile u16 rcc; /* character count field */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143 u16 reserved; /* padding required by 16C32 */
144 u32 link; /* 32-bit flat link to next buffer entry */
145 char *virt_addr; /* virtual address of data buffer */
146 u32 phys_entry; /* physical address of this buffer entry */
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -0800147 dma_addr_t dma_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148} DMABUFFERENTRY, *DMAPBUFFERENTRY;
149
150/* The queue of BH actions to be performed */
151
152#define BH_RECEIVE 1
153#define BH_TRANSMIT 2
154#define BH_STATUS 4
155
156#define IO_PIN_SHUTDOWN_LIMIT 100
157
Linus Torvalds1da177e2005-04-16 15:20:36 -0700158struct _input_signal_events {
159 int ri_up;
160 int ri_down;
161 int dsr_up;
162 int dsr_down;
163 int dcd_up;
164 int dcd_down;
165 int cts_up;
166 int cts_down;
167};
168
169/* transmit holding buffer definitions*/
170#define MAX_TX_HOLDING_BUFFERS 5
171struct tx_holding_buffer {
172 int buffer_size;
173 unsigned char * buffer;
174};
175
176
177/*
178 * Device instance data structure
179 */
180
181struct mgsl_struct {
182 int magic;
Alan Cox8fb06c72008-07-16 21:56:46 +0100183 struct tty_port port;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700184 int line;
185 int hw_version;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700186
187 struct mgsl_icount icount;
188
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189 int timeout;
190 int x_char; /* xon/xoff character */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700191 u16 read_status_mask;
192 u16 ignore_status_mask;
193 unsigned char *xmit_buf;
194 int xmit_head;
195 int xmit_tail;
196 int xmit_cnt;
197
Linus Torvalds1da177e2005-04-16 15:20:36 -0700198 wait_queue_head_t status_event_wait_q;
199 wait_queue_head_t event_wait_q;
200 struct timer_list tx_timer; /* HDLC transmit timeout timer */
201 struct mgsl_struct *next_device; /* device list link */
202
203 spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */
204 struct work_struct task; /* task structure for scheduling bh */
205
206 u32 EventMask; /* event trigger mask */
207 u32 RecordedEvents; /* pending events */
208
209 u32 max_frame_size; /* as set by device config */
210
211 u32 pending_bh;
212
Joe Perches0fab6de2008-04-28 02:14:02 -0700213 bool bh_running; /* Protection from multiple */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700214 int isr_overflow;
Joe Perches0fab6de2008-04-28 02:14:02 -0700215 bool bh_requested;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700216
217 int dcd_chkcount; /* check counts to prevent */
218 int cts_chkcount; /* too many IRQs if a signal */
219 int dsr_chkcount; /* is floating */
220 int ri_chkcount;
221
222 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -0800223 u32 buffer_list_phys;
224 dma_addr_t buffer_list_dma_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700225
226 unsigned int rx_buffer_count; /* count of total allocated Rx buffers */
227 DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */
228 unsigned int current_rx_buffer;
229
230 int num_tx_dma_buffers; /* number of tx dma frames required */
231 int tx_dma_buffers_used;
232 unsigned int tx_buffer_count; /* count of total allocated Tx buffers */
233 DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */
234 int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */
235 int current_tx_buffer; /* next tx dma buffer to be loaded */
236
237 unsigned char *intermediate_rxbuffer;
238
239 int num_tx_holding_buffers; /* number of tx holding buffer allocated */
240 int get_tx_holding_index; /* next tx holding buffer for adapter to load */
241 int put_tx_holding_index; /* next tx holding buffer to store user request */
242 int tx_holding_count; /* number of tx holding buffers waiting */
243 struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS];
244
Joe Perches0fab6de2008-04-28 02:14:02 -0700245 bool rx_enabled;
246 bool rx_overflow;
247 bool rx_rcc_underrun;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700248
Joe Perches0fab6de2008-04-28 02:14:02 -0700249 bool tx_enabled;
250 bool tx_active;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251 u32 idle_mode;
252
253 u16 cmr_value;
254 u16 tcsr_value;
255
256 char device_name[25]; /* device instance name */
257
258 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
259 unsigned char bus; /* expansion bus number (zero based) */
260 unsigned char function; /* PCI device number */
261
262 unsigned int io_base; /* base I/O address of adapter */
263 unsigned int io_addr_size; /* size of the I/O address range */
Joe Perches0fab6de2008-04-28 02:14:02 -0700264 bool io_addr_requested; /* true if I/O address requested */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700265
266 unsigned int irq_level; /* interrupt level */
267 unsigned long irq_flags;
Joe Perches0fab6de2008-04-28 02:14:02 -0700268 bool irq_requested; /* true if IRQ requested */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700269
270 unsigned int dma_level; /* DMA channel */
Joe Perches0fab6de2008-04-28 02:14:02 -0700271 bool dma_requested; /* true if dma channel requested */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700272
273 u16 mbre_bit;
274 u16 loopback_bits;
275 u16 usc_idle_mode;
276
277 MGSL_PARAMS params; /* communications parameters */
278
279 unsigned char serial_signals; /* current serial signal states */
280
Joe Perches0fab6de2008-04-28 02:14:02 -0700281 bool irq_occurred; /* for diagnostics use */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700282 unsigned int init_error; /* Initialization startup error (DIAGS) */
283 int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */
284
285 u32 last_mem_alloc;
286 unsigned char* memory_base; /* shared memory address (PCI only) */
287 u32 phys_memory_base;
Joe Perches0fab6de2008-04-28 02:14:02 -0700288 bool shared_mem_requested;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700289
290 unsigned char* lcr_base; /* local config registers (PCI only) */
291 u32 phys_lcr_base;
292 u32 lcr_offset;
Joe Perches0fab6de2008-04-28 02:14:02 -0700293 bool lcr_mem_requested;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700294
295 u32 misc_ctrl_value;
296 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
297 char char_buf[MAX_ASYNC_BUFFER_SIZE];
Joe Perches0fab6de2008-04-28 02:14:02 -0700298 bool drop_rts_on_tx_done;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299
Joe Perches0fab6de2008-04-28 02:14:02 -0700300 bool loopmode_insert_requested;
301 bool loopmode_send_done_requested;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700302
303 struct _input_signal_events input_signal_events;
304
305 /* generic HDLC device parts */
306 int netcount;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307 spinlock_t netlock;
308
Paul Fulghumaf69c7f2006-12-06 20:40:24 -0800309#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700310 struct net_device *netdev;
311#endif
312};
313
314#define MGSL_MAGIC 0x5401
315
316/*
317 * The size of the serial xmit buffer is 1 page, or 4096 bytes
318 */
319#ifndef SERIAL_XMIT_SIZE
320#define SERIAL_XMIT_SIZE 4096
321#endif
322
323/*
324 * These macros define the offsets used in calculating the
325 * I/O address of the specified USC registers.
326 */
327
328
329#define DCPIN 2 /* Bit 1 of I/O address */
330#define SDPIN 4 /* Bit 2 of I/O address */
331
332#define DCAR 0 /* DMA command/address register */
333#define CCAR SDPIN /* channel command/address register */
334#define DATAREG DCPIN + SDPIN /* serial data register */
335#define MSBONLY 0x41
336#define LSBONLY 0x40
337
338/*
339 * These macros define the register address (ordinal number)
340 * used for writing address/value pairs to the USC.
341 */
342
343#define CMR 0x02 /* Channel mode Register */
344#define CCSR 0x04 /* Channel Command/status Register */
345#define CCR 0x06 /* Channel Control Register */
346#define PSR 0x08 /* Port status Register */
347#define PCR 0x0a /* Port Control Register */
348#define TMDR 0x0c /* Test mode Data Register */
349#define TMCR 0x0e /* Test mode Control Register */
350#define CMCR 0x10 /* Clock mode Control Register */
351#define HCR 0x12 /* Hardware Configuration Register */
352#define IVR 0x14 /* Interrupt Vector Register */
353#define IOCR 0x16 /* Input/Output Control Register */
354#define ICR 0x18 /* Interrupt Control Register */
355#define DCCR 0x1a /* Daisy Chain Control Register */
356#define MISR 0x1c /* Misc Interrupt status Register */
357#define SICR 0x1e /* status Interrupt Control Register */
358#define RDR 0x20 /* Receive Data Register */
359#define RMR 0x22 /* Receive mode Register */
360#define RCSR 0x24 /* Receive Command/status Register */
361#define RICR 0x26 /* Receive Interrupt Control Register */
362#define RSR 0x28 /* Receive Sync Register */
363#define RCLR 0x2a /* Receive count Limit Register */
364#define RCCR 0x2c /* Receive Character count Register */
365#define TC0R 0x2e /* Time Constant 0 Register */
366#define TDR 0x30 /* Transmit Data Register */
367#define TMR 0x32 /* Transmit mode Register */
368#define TCSR 0x34 /* Transmit Command/status Register */
369#define TICR 0x36 /* Transmit Interrupt Control Register */
370#define TSR 0x38 /* Transmit Sync Register */
371#define TCLR 0x3a /* Transmit count Limit Register */
372#define TCCR 0x3c /* Transmit Character count Register */
373#define TC1R 0x3e /* Time Constant 1 Register */
374
375
376/*
377 * MACRO DEFINITIONS FOR DMA REGISTERS
378 */
379
380#define DCR 0x06 /* DMA Control Register (shared) */
381#define DACR 0x08 /* DMA Array count Register (shared) */
382#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */
383#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
384#define DICR 0x18 /* DMA Interrupt Control Register (shared) */
385#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */
386#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */
387
388#define TDMR 0x02 /* Transmit DMA mode Register */
389#define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */
390#define TBCR 0x2a /* Transmit Byte count Register */
391#define TARL 0x2c /* Transmit Address Register (low) */
392#define TARU 0x2e /* Transmit Address Register (high) */
393#define NTBCR 0x3a /* Next Transmit Byte count Register */
394#define NTARL 0x3c /* Next Transmit Address Register (low) */
395#define NTARU 0x3e /* Next Transmit Address Register (high) */
396
397#define RDMR 0x82 /* Receive DMA mode Register (non-shared) */
398#define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */
399#define RBCR 0xaa /* Receive Byte count Register */
400#define RARL 0xac /* Receive Address Register (low) */
401#define RARU 0xae /* Receive Address Register (high) */
402#define NRBCR 0xba /* Next Receive Byte count Register */
403#define NRARL 0xbc /* Next Receive Address Register (low) */
404#define NRARU 0xbe /* Next Receive Address Register (high) */
405
406
407/*
408 * MACRO DEFINITIONS FOR MODEM STATUS BITS
409 */
410
411#define MODEMSTATUS_DTR 0x80
412#define MODEMSTATUS_DSR 0x40
413#define MODEMSTATUS_RTS 0x20
414#define MODEMSTATUS_CTS 0x10
415#define MODEMSTATUS_RI 0x04
416#define MODEMSTATUS_DCD 0x01
417
418
419/*
420 * Channel Command/Address Register (CCAR) Command Codes
421 */
422
423#define RTCmd_Null 0x0000
424#define RTCmd_ResetHighestIus 0x1000
425#define RTCmd_TriggerChannelLoadDma 0x2000
426#define RTCmd_TriggerRxDma 0x2800
427#define RTCmd_TriggerTxDma 0x3000
428#define RTCmd_TriggerRxAndTxDma 0x3800
429#define RTCmd_PurgeRxFifo 0x4800
430#define RTCmd_PurgeTxFifo 0x5000
431#define RTCmd_PurgeRxAndTxFifo 0x5800
432#define RTCmd_LoadRcc 0x6800
433#define RTCmd_LoadTcc 0x7000
434#define RTCmd_LoadRccAndTcc 0x7800
435#define RTCmd_LoadTC0 0x8800
436#define RTCmd_LoadTC1 0x9000
437#define RTCmd_LoadTC0AndTC1 0x9800
438#define RTCmd_SerialDataLSBFirst 0xa000
439#define RTCmd_SerialDataMSBFirst 0xa800
440#define RTCmd_SelectBigEndian 0xb000
441#define RTCmd_SelectLittleEndian 0xb800
442
443
444/*
445 * DMA Command/Address Register (DCAR) Command Codes
446 */
447
448#define DmaCmd_Null 0x0000
449#define DmaCmd_ResetTxChannel 0x1000
450#define DmaCmd_ResetRxChannel 0x1200
451#define DmaCmd_StartTxChannel 0x2000
452#define DmaCmd_StartRxChannel 0x2200
453#define DmaCmd_ContinueTxChannel 0x3000
454#define DmaCmd_ContinueRxChannel 0x3200
455#define DmaCmd_PauseTxChannel 0x4000
456#define DmaCmd_PauseRxChannel 0x4200
457#define DmaCmd_AbortTxChannel 0x5000
458#define DmaCmd_AbortRxChannel 0x5200
459#define DmaCmd_InitTxChannel 0x7000
460#define DmaCmd_InitRxChannel 0x7200
461#define DmaCmd_ResetHighestDmaIus 0x8000
462#define DmaCmd_ResetAllChannels 0x9000
463#define DmaCmd_StartAllChannels 0xa000
464#define DmaCmd_ContinueAllChannels 0xb000
465#define DmaCmd_PauseAllChannels 0xc000
466#define DmaCmd_AbortAllChannels 0xd000
467#define DmaCmd_InitAllChannels 0xf000
468
469#define TCmd_Null 0x0000
470#define TCmd_ClearTxCRC 0x2000
471#define TCmd_SelectTicrTtsaData 0x4000
472#define TCmd_SelectTicrTxFifostatus 0x5000
473#define TCmd_SelectTicrIntLevel 0x6000
474#define TCmd_SelectTicrdma_level 0x7000
475#define TCmd_SendFrame 0x8000
476#define TCmd_SendAbort 0x9000
477#define TCmd_EnableDleInsertion 0xc000
478#define TCmd_DisableDleInsertion 0xd000
479#define TCmd_ClearEofEom 0xe000
480#define TCmd_SetEofEom 0xf000
481
482#define RCmd_Null 0x0000
483#define RCmd_ClearRxCRC 0x2000
484#define RCmd_EnterHuntmode 0x3000
485#define RCmd_SelectRicrRtsaData 0x4000
486#define RCmd_SelectRicrRxFifostatus 0x5000
487#define RCmd_SelectRicrIntLevel 0x6000
488#define RCmd_SelectRicrdma_level 0x7000
489
490/*
491 * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
492 */
493
494#define RECEIVE_STATUS BIT5
495#define RECEIVE_DATA BIT4
496#define TRANSMIT_STATUS BIT3
497#define TRANSMIT_DATA BIT2
498#define IO_PIN BIT1
499#define MISC BIT0
500
501
502/*
503 * Receive status Bits in Receive Command/status Register RCSR
504 */
505
506#define RXSTATUS_SHORT_FRAME BIT8
507#define RXSTATUS_CODE_VIOLATION BIT8
508#define RXSTATUS_EXITED_HUNT BIT7
509#define RXSTATUS_IDLE_RECEIVED BIT6
510#define RXSTATUS_BREAK_RECEIVED BIT5
511#define RXSTATUS_ABORT_RECEIVED BIT5
512#define RXSTATUS_RXBOUND BIT4
513#define RXSTATUS_CRC_ERROR BIT3
514#define RXSTATUS_FRAMING_ERROR BIT3
515#define RXSTATUS_ABORT BIT2
516#define RXSTATUS_PARITY_ERROR BIT2
517#define RXSTATUS_OVERRUN BIT1
518#define RXSTATUS_DATA_AVAILABLE BIT0
519#define RXSTATUS_ALL 0x01f6
520#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )
521
522/*
523 * Values for setting transmit idle mode in
524 * Transmit Control/status Register (TCSR)
525 */
526#define IDLEMODE_FLAGS 0x0000
527#define IDLEMODE_ALT_ONE_ZERO 0x0100
528#define IDLEMODE_ZERO 0x0200
529#define IDLEMODE_ONE 0x0300
530#define IDLEMODE_ALT_MARK_SPACE 0x0500
531#define IDLEMODE_SPACE 0x0600
532#define IDLEMODE_MARK 0x0700
533#define IDLEMODE_MASK 0x0700
534
535/*
536 * IUSC revision identifiers
537 */
538#define IUSC_SL1660 0x4d44
539#define IUSC_PRE_SL1660 0x4553
540
541/*
542 * Transmit status Bits in Transmit Command/status Register (TCSR)
543 */
544
545#define TCSR_PRESERVE 0x0F00
546
547#define TCSR_UNDERWAIT BIT11
548#define TXSTATUS_PREAMBLE_SENT BIT7
549#define TXSTATUS_IDLE_SENT BIT6
550#define TXSTATUS_ABORT_SENT BIT5
551#define TXSTATUS_EOF_SENT BIT4
552#define TXSTATUS_EOM_SENT BIT4
553#define TXSTATUS_CRC_SENT BIT3
554#define TXSTATUS_ALL_SENT BIT2
555#define TXSTATUS_UNDERRUN BIT1
556#define TXSTATUS_FIFO_EMPTY BIT0
557#define TXSTATUS_ALL 0x00fa
558#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
559
560
561#define MISCSTATUS_RXC_LATCHED BIT15
562#define MISCSTATUS_RXC BIT14
563#define MISCSTATUS_TXC_LATCHED BIT13
564#define MISCSTATUS_TXC BIT12
565#define MISCSTATUS_RI_LATCHED BIT11
566#define MISCSTATUS_RI BIT10
567#define MISCSTATUS_DSR_LATCHED BIT9
568#define MISCSTATUS_DSR BIT8
569#define MISCSTATUS_DCD_LATCHED BIT7
570#define MISCSTATUS_DCD BIT6
571#define MISCSTATUS_CTS_LATCHED BIT5
572#define MISCSTATUS_CTS BIT4
573#define MISCSTATUS_RCC_UNDERRUN BIT3
574#define MISCSTATUS_DPLL_NO_SYNC BIT2
575#define MISCSTATUS_BRG1_ZERO BIT1
576#define MISCSTATUS_BRG0_ZERO BIT0
577
578#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0))
579#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f))
580
581#define SICR_RXC_ACTIVE BIT15
582#define SICR_RXC_INACTIVE BIT14
583#define SICR_RXC (BIT15+BIT14)
584#define SICR_TXC_ACTIVE BIT13
585#define SICR_TXC_INACTIVE BIT12
586#define SICR_TXC (BIT13+BIT12)
587#define SICR_RI_ACTIVE BIT11
588#define SICR_RI_INACTIVE BIT10
589#define SICR_RI (BIT11+BIT10)
590#define SICR_DSR_ACTIVE BIT9
591#define SICR_DSR_INACTIVE BIT8
592#define SICR_DSR (BIT9+BIT8)
593#define SICR_DCD_ACTIVE BIT7
594#define SICR_DCD_INACTIVE BIT6
595#define SICR_DCD (BIT7+BIT6)
596#define SICR_CTS_ACTIVE BIT5
597#define SICR_CTS_INACTIVE BIT4
598#define SICR_CTS (BIT5+BIT4)
599#define SICR_RCC_UNDERFLOW BIT3
600#define SICR_DPLL_NO_SYNC BIT2
601#define SICR_BRG1_ZERO BIT1
602#define SICR_BRG0_ZERO BIT0
603
604void usc_DisableMasterIrqBit( struct mgsl_struct *info );
605void usc_EnableMasterIrqBit( struct mgsl_struct *info );
606void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask );
607void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask );
608void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask );
609
610#define usc_EnableInterrupts( a, b ) \
611 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) )
612
613#define usc_DisableInterrupts( a, b ) \
614 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) )
615
616#define usc_EnableMasterIrqBit(a) \
617 usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) )
618
619#define usc_DisableMasterIrqBit(a) \
620 usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) )
621
622#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) )
623
624/*
625 * Transmit status Bits in Transmit Control status Register (TCSR)
626 * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0)
627 */
628
629#define TXSTATUS_PREAMBLE_SENT BIT7
630#define TXSTATUS_IDLE_SENT BIT6
631#define TXSTATUS_ABORT_SENT BIT5
632#define TXSTATUS_EOF BIT4
633#define TXSTATUS_CRC_SENT BIT3
634#define TXSTATUS_ALL_SENT BIT2
635#define TXSTATUS_UNDERRUN BIT1
636#define TXSTATUS_FIFO_EMPTY BIT0
637
638#define DICR_MASTER BIT15
639#define DICR_TRANSMIT BIT0
640#define DICR_RECEIVE BIT1
641
642#define usc_EnableDmaInterrupts(a,b) \
643 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) )
644
645#define usc_DisableDmaInterrupts(a,b) \
646 usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) )
647
648#define usc_EnableStatusIrqs(a,b) \
649 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) )
650
651#define usc_DisablestatusIrqs(a,b) \
652 usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) )
653
654/* Transmit status Bits in Transmit Control status Register (TCSR) */
655/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */
656
657
658#define DISABLE_UNCONDITIONAL 0
659#define DISABLE_END_OF_FRAME 1
660#define ENABLE_UNCONDITIONAL 2
661#define ENABLE_AUTO_CTS 3
662#define ENABLE_AUTO_DCD 3
663#define usc_EnableTransmitter(a,b) \
664 usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) )
665#define usc_EnableReceiver(a,b) \
666 usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) )
667
668static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port );
669static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value );
670static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd );
671
672static u16 usc_InReg( struct mgsl_struct *info, u16 Port );
673static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value );
674static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd );
675void usc_RCmd( struct mgsl_struct *info, u16 Cmd );
676void usc_TCmd( struct mgsl_struct *info, u16 Cmd );
677
678#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b)))
679#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b))
680
681#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1))
682
683static void usc_process_rxoverrun_sync( struct mgsl_struct *info );
684static void usc_start_receiver( struct mgsl_struct *info );
685static void usc_stop_receiver( struct mgsl_struct *info );
686
687static void usc_start_transmitter( struct mgsl_struct *info );
688static void usc_stop_transmitter( struct mgsl_struct *info );
689static void usc_set_txidle( struct mgsl_struct *info );
690static void usc_load_txfifo( struct mgsl_struct *info );
691
692static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate );
693static void usc_enable_loopback( struct mgsl_struct *info, int enable );
694
695static void usc_get_serial_signals( struct mgsl_struct *info );
696static void usc_set_serial_signals( struct mgsl_struct *info );
697
698static void usc_reset( struct mgsl_struct *info );
699
700static void usc_set_sync_mode( struct mgsl_struct *info );
701static void usc_set_sdlc_mode( struct mgsl_struct *info );
702static void usc_set_async_mode( struct mgsl_struct *info );
703static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate );
704
705static void usc_loopback_frame( struct mgsl_struct *info );
706
707static void mgsl_tx_timeout(unsigned long context);
708
709
710static void usc_loopmode_cancel_transmit( struct mgsl_struct * info );
711static void usc_loopmode_insert_request( struct mgsl_struct * info );
712static int usc_loopmode_active( struct mgsl_struct * info);
713static void usc_loopmode_send_done( struct mgsl_struct * info );
714
715static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg);
716
Paul Fulghumaf69c7f2006-12-06 20:40:24 -0800717#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718#define dev_to_port(D) (dev_to_hdlc(D)->priv)
719static void hdlcdev_tx_done(struct mgsl_struct *info);
720static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size);
721static int hdlcdev_init(struct mgsl_struct *info);
722static void hdlcdev_exit(struct mgsl_struct *info);
723#endif
724
725/*
726 * Defines a BUS descriptor value for the PCI adapter
727 * local bus address ranges.
728 */
729
730#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \
731(0x00400020 + \
732((WrHold) << 30) + \
733((WrDly) << 28) + \
734((RdDly) << 26) + \
735((Nwdd) << 20) + \
736((Nwad) << 15) + \
737((Nxda) << 13) + \
738((Nrdd) << 11) + \
739((Nrad) << 6) )
740
741static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit);
742
743/*
744 * Adapter diagnostic routines
745 */
Joe Perches0fab6de2008-04-28 02:14:02 -0700746static bool mgsl_register_test( struct mgsl_struct *info );
747static bool mgsl_irq_test( struct mgsl_struct *info );
748static bool mgsl_dma_test( struct mgsl_struct *info );
749static bool mgsl_memory_test( struct mgsl_struct *info );
Linus Torvalds1da177e2005-04-16 15:20:36 -0700750static int mgsl_adapter_test( struct mgsl_struct *info );
751
752/*
753 * device and resource management routines
754 */
755static int mgsl_claim_resources(struct mgsl_struct *info);
756static void mgsl_release_resources(struct mgsl_struct *info);
757static void mgsl_add_device(struct mgsl_struct *info);
758static struct mgsl_struct* mgsl_allocate_device(void);
759
760/*
761 * DMA buffer manupulation functions.
762 */
763static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex );
Joe Perches0fab6de2008-04-28 02:14:02 -0700764static bool mgsl_get_rx_frame( struct mgsl_struct *info );
765static bool mgsl_get_raw_rx_frame( struct mgsl_struct *info );
Linus Torvalds1da177e2005-04-16 15:20:36 -0700766static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info );
767static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info );
768static int num_free_tx_dma_buffers(struct mgsl_struct *info);
769static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize);
770static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count);
771
772/*
773 * DMA and Shared Memory buffer allocation and formatting
774 */
775static int mgsl_allocate_dma_buffers(struct mgsl_struct *info);
776static void mgsl_free_dma_buffers(struct mgsl_struct *info);
777static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
778static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount);
779static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info);
780static void mgsl_free_buffer_list_memory(struct mgsl_struct *info);
781static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info);
782static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info);
783static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info);
784static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info);
Joe Perches0fab6de2008-04-28 02:14:02 -0700785static bool load_next_tx_holding_buffer(struct mgsl_struct *info);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700786static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize);
787
788/*
789 * Bottom half interrupt handlers
790 */
David Howellsc4028952006-11-22 14:57:56 +0000791static void mgsl_bh_handler(struct work_struct *work);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700792static void mgsl_bh_receive(struct mgsl_struct *info);
793static void mgsl_bh_transmit(struct mgsl_struct *info);
794static void mgsl_bh_status(struct mgsl_struct *info);
795
796/*
797 * Interrupt handler routines and dispatch table.
798 */
799static void mgsl_isr_null( struct mgsl_struct *info );
800static void mgsl_isr_transmit_data( struct mgsl_struct *info );
801static void mgsl_isr_receive_data( struct mgsl_struct *info );
802static void mgsl_isr_receive_status( struct mgsl_struct *info );
803static void mgsl_isr_transmit_status( struct mgsl_struct *info );
804static void mgsl_isr_io_pin( struct mgsl_struct *info );
805static void mgsl_isr_misc( struct mgsl_struct *info );
806static void mgsl_isr_receive_dma( struct mgsl_struct *info );
807static void mgsl_isr_transmit_dma( struct mgsl_struct *info );
808
809typedef void (*isr_dispatch_func)(struct mgsl_struct *);
810
811static isr_dispatch_func UscIsrTable[7] =
812{
813 mgsl_isr_null,
814 mgsl_isr_misc,
815 mgsl_isr_io_pin,
816 mgsl_isr_transmit_data,
817 mgsl_isr_transmit_status,
818 mgsl_isr_receive_data,
819 mgsl_isr_receive_status
820};
821
822/*
823 * ioctl call handlers
824 */
825static int tiocmget(struct tty_struct *tty, struct file *file);
826static int tiocmset(struct tty_struct *tty, struct file *file,
827 unsigned int set, unsigned int clear);
828static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount
829 __user *user_icount);
830static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params);
831static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params);
832static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode);
833static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode);
834static int mgsl_txenable(struct mgsl_struct * info, int enable);
835static int mgsl_txabort(struct mgsl_struct * info);
836static int mgsl_rxenable(struct mgsl_struct * info, int enable);
837static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask);
838static int mgsl_loopmode_send_done( struct mgsl_struct * info );
839
840/* set non-zero on successful registration with PCI subsystem */
Joe Perches0fab6de2008-04-28 02:14:02 -0700841static bool pci_registered;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700842
843/*
844 * Global linked list of SyncLink devices
845 */
846static struct mgsl_struct *mgsl_device_list;
847static int mgsl_device_count;
848
849/*
850 * Set this param to non-zero to load eax with the
851 * .text section address and breakpoint on module load.
852 * This is useful for use with gdb and add-symbol-file command.
853 */
854static int break_on_load;
855
856/*
857 * Driver major number, defaults to zero to get auto
858 * assigned major number. May be forced as module parameter.
859 */
860static int ttymajor;
861
862/*
863 * Array of user specified options for ISA adapters.
864 */
865static int io[MAX_ISA_DEVICES];
866static int irq[MAX_ISA_DEVICES];
867static int dma[MAX_ISA_DEVICES];
868static int debug_level;
869static int maxframe[MAX_TOTAL_DEVICES];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700870static int txdmabufs[MAX_TOTAL_DEVICES];
871static int txholdbufs[MAX_TOTAL_DEVICES];
872
873module_param(break_on_load, bool, 0);
874module_param(ttymajor, int, 0);
875module_param_array(io, int, NULL, 0);
876module_param_array(irq, int, NULL, 0);
877module_param_array(dma, int, NULL, 0);
878module_param(debug_level, int, 0);
879module_param_array(maxframe, int, NULL, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700880module_param_array(txdmabufs, int, NULL, 0);
881module_param_array(txholdbufs, int, NULL, 0);
882
883static char *driver_name = "SyncLink serial driver";
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -0800884static char *driver_version = "$Revision: 4.38 $";
Linus Torvalds1da177e2005-04-16 15:20:36 -0700885
886static int synclink_init_one (struct pci_dev *dev,
887 const struct pci_device_id *ent);
888static void synclink_remove_one (struct pci_dev *dev);
889
890static struct pci_device_id synclink_pci_tbl[] = {
891 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, },
892 { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, },
893 { 0, }, /* terminate list */
894};
895MODULE_DEVICE_TABLE(pci, synclink_pci_tbl);
896
897MODULE_LICENSE("GPL");
898
899static struct pci_driver synclink_pci_driver = {
900 .name = "synclink",
901 .id_table = synclink_pci_tbl,
902 .probe = synclink_init_one,
903 .remove = __devexit_p(synclink_remove_one),
904};
905
906static struct tty_driver *serial_driver;
907
908/* number of characters left in xmit buffer before we ask for more */
909#define WAKEUP_CHARS 256
910
911
912static void mgsl_change_params(struct mgsl_struct *info);
913static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout);
914
915/*
916 * 1st function defined in .text section. Calling this function in
917 * init_module() followed by a breakpoint allows a remote debugger
918 * (gdb) to get the .text address for the add-symbol-file command.
919 * This allows remote debugging of dynamically loadable modules.
920 */
921static void* mgsl_get_text_ptr(void)
922{
923 return mgsl_get_text_ptr;
924}
925
Linus Torvalds1da177e2005-04-16 15:20:36 -0700926static inline int mgsl_paranoia_check(struct mgsl_struct *info,
927 char *name, const char *routine)
928{
929#ifdef MGSL_PARANOIA_CHECK
930 static const char *badmagic =
931 "Warning: bad magic number for mgsl struct (%s) in %s\n";
932 static const char *badinfo =
933 "Warning: null mgsl_struct for (%s) in %s\n";
934
935 if (!info) {
936 printk(badinfo, name, routine);
937 return 1;
938 }
939 if (info->magic != MGSL_MAGIC) {
940 printk(badmagic, name, routine);
941 return 1;
942 }
943#else
944 if (!info)
945 return 1;
946#endif
947 return 0;
948}
949
950/**
951 * line discipline callback wrappers
952 *
953 * The wrappers maintain line discipline references
954 * while calling into the line discipline.
955 *
956 * ldisc_receive_buf - pass receive data to line discipline
957 */
958
959static void ldisc_receive_buf(struct tty_struct *tty,
960 const __u8 *data, char *flags, int count)
961{
962 struct tty_ldisc *ld;
963 if (!tty)
964 return;
965 ld = tty_ldisc_ref(tty);
966 if (ld) {
Alan Coxa352def2008-07-16 21:53:12 +0100967 if (ld->ops->receive_buf)
968 ld->ops->receive_buf(tty, data, flags, count);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700969 tty_ldisc_deref(ld);
970 }
971}
972
973/* mgsl_stop() throttle (stop) transmitter
974 *
975 * Arguments: tty pointer to tty info structure
976 * Return Value: None
977 */
978static void mgsl_stop(struct tty_struct *tty)
979{
980 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
981 unsigned long flags;
982
983 if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
984 return;
985
986 if ( debug_level >= DEBUG_LEVEL_INFO )
987 printk("mgsl_stop(%s)\n",info->device_name);
988
989 spin_lock_irqsave(&info->irq_spinlock,flags);
990 if (info->tx_enabled)
991 usc_stop_transmitter(info);
992 spin_unlock_irqrestore(&info->irq_spinlock,flags);
993
994} /* end of mgsl_stop() */
995
996/* mgsl_start() release (start) transmitter
997 *
998 * Arguments: tty pointer to tty info structure
999 * Return Value: None
1000 */
1001static void mgsl_start(struct tty_struct *tty)
1002{
1003 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
1004 unsigned long flags;
1005
1006 if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
1007 return;
1008
1009 if ( debug_level >= DEBUG_LEVEL_INFO )
1010 printk("mgsl_start(%s)\n",info->device_name);
1011
1012 spin_lock_irqsave(&info->irq_spinlock,flags);
1013 if (!info->tx_enabled)
1014 usc_start_transmitter(info);
1015 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1016
1017} /* end of mgsl_start() */
1018
1019/*
1020 * Bottom half work queue access functions
1021 */
1022
1023/* mgsl_bh_action() Return next bottom half action to perform.
1024 * Return Value: BH action code or 0 if nothing to do.
1025 */
1026static int mgsl_bh_action(struct mgsl_struct *info)
1027{
1028 unsigned long flags;
1029 int rc = 0;
1030
1031 spin_lock_irqsave(&info->irq_spinlock,flags);
1032
1033 if (info->pending_bh & BH_RECEIVE) {
1034 info->pending_bh &= ~BH_RECEIVE;
1035 rc = BH_RECEIVE;
1036 } else if (info->pending_bh & BH_TRANSMIT) {
1037 info->pending_bh &= ~BH_TRANSMIT;
1038 rc = BH_TRANSMIT;
1039 } else if (info->pending_bh & BH_STATUS) {
1040 info->pending_bh &= ~BH_STATUS;
1041 rc = BH_STATUS;
1042 }
1043
1044 if (!rc) {
1045 /* Mark BH routine as complete */
Joe Perches0fab6de2008-04-28 02:14:02 -07001046 info->bh_running = false;
1047 info->bh_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001048 }
1049
1050 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1051
1052 return rc;
1053}
1054
1055/*
1056 * Perform bottom half processing of work items queued by ISR.
1057 */
David Howellsc4028952006-11-22 14:57:56 +00001058static void mgsl_bh_handler(struct work_struct *work)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001059{
David Howellsc4028952006-11-22 14:57:56 +00001060 struct mgsl_struct *info =
1061 container_of(work, struct mgsl_struct, task);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001062 int action;
1063
1064 if (!info)
1065 return;
1066
1067 if ( debug_level >= DEBUG_LEVEL_BH )
1068 printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
1069 __FILE__,__LINE__,info->device_name);
1070
Joe Perches0fab6de2008-04-28 02:14:02 -07001071 info->bh_running = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001072
1073 while((action = mgsl_bh_action(info)) != 0) {
1074
1075 /* Process work item */
1076 if ( debug_level >= DEBUG_LEVEL_BH )
1077 printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
1078 __FILE__,__LINE__,action);
1079
1080 switch (action) {
1081
1082 case BH_RECEIVE:
1083 mgsl_bh_receive(info);
1084 break;
1085 case BH_TRANSMIT:
1086 mgsl_bh_transmit(info);
1087 break;
1088 case BH_STATUS:
1089 mgsl_bh_status(info);
1090 break;
1091 default:
1092 /* unknown work item ID */
1093 printk("Unknown work item ID=%08X!\n", action);
1094 break;
1095 }
1096 }
1097
1098 if ( debug_level >= DEBUG_LEVEL_BH )
1099 printk( "%s(%d):mgsl_bh_handler(%s) exit\n",
1100 __FILE__,__LINE__,info->device_name);
1101}
1102
1103static void mgsl_bh_receive(struct mgsl_struct *info)
1104{
Joe Perches0fab6de2008-04-28 02:14:02 -07001105 bool (*get_rx_frame)(struct mgsl_struct *info) =
Linus Torvalds1da177e2005-04-16 15:20:36 -07001106 (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame);
1107
1108 if ( debug_level >= DEBUG_LEVEL_BH )
1109 printk( "%s(%d):mgsl_bh_receive(%s)\n",
1110 __FILE__,__LINE__,info->device_name);
1111
1112 do
1113 {
1114 if (info->rx_rcc_underrun) {
1115 unsigned long flags;
1116 spin_lock_irqsave(&info->irq_spinlock,flags);
1117 usc_start_receiver(info);
1118 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1119 return;
1120 }
1121 } while(get_rx_frame(info));
1122}
1123
1124static void mgsl_bh_transmit(struct mgsl_struct *info)
1125{
Alan Cox8fb06c72008-07-16 21:56:46 +01001126 struct tty_struct *tty = info->port.tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001127 unsigned long flags;
1128
1129 if ( debug_level >= DEBUG_LEVEL_BH )
1130 printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
1131 __FILE__,__LINE__,info->device_name);
1132
Jiri Slabyb963a842007-02-10 01:44:55 -08001133 if (tty)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001134 tty_wakeup(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001135
1136 /* if transmitter idle and loopmode_send_done_requested
1137 * then start echoing RxD to TxD
1138 */
1139 spin_lock_irqsave(&info->irq_spinlock,flags);
1140 if ( !info->tx_active && info->loopmode_send_done_requested )
1141 usc_loopmode_send_done( info );
1142 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1143}
1144
1145static void mgsl_bh_status(struct mgsl_struct *info)
1146{
1147 if ( debug_level >= DEBUG_LEVEL_BH )
1148 printk( "%s(%d):mgsl_bh_status() entry on %s\n",
1149 __FILE__,__LINE__,info->device_name);
1150
1151 info->ri_chkcount = 0;
1152 info->dsr_chkcount = 0;
1153 info->dcd_chkcount = 0;
1154 info->cts_chkcount = 0;
1155}
1156
1157/* mgsl_isr_receive_status()
1158 *
1159 * Service a receive status interrupt. The type of status
1160 * interrupt is indicated by the state of the RCSR.
1161 * This is only used for HDLC mode.
1162 *
1163 * Arguments: info pointer to device instance data
1164 * Return Value: None
1165 */
1166static void mgsl_isr_receive_status( struct mgsl_struct *info )
1167{
1168 u16 status = usc_InReg( info, RCSR );
1169
1170 if ( debug_level >= DEBUG_LEVEL_ISR )
1171 printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
1172 __FILE__,__LINE__,status);
1173
1174 if ( (status & RXSTATUS_ABORT_RECEIVED) &&
1175 info->loopmode_insert_requested &&
1176 usc_loopmode_active(info) )
1177 {
1178 ++info->icount.rxabort;
Joe Perches0fab6de2008-04-28 02:14:02 -07001179 info->loopmode_insert_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001180
1181 /* clear CMR:13 to start echoing RxD to TxD */
1182 info->cmr_value &= ~BIT13;
1183 usc_OutReg(info, CMR, info->cmr_value);
1184
1185 /* disable received abort irq (no longer required) */
1186 usc_OutReg(info, RICR,
1187 (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
1188 }
1189
1190 if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) {
1191 if (status & RXSTATUS_EXITED_HUNT)
1192 info->icount.exithunt++;
1193 if (status & RXSTATUS_IDLE_RECEIVED)
1194 info->icount.rxidle++;
1195 wake_up_interruptible(&info->event_wait_q);
1196 }
1197
1198 if (status & RXSTATUS_OVERRUN){
1199 info->icount.rxover++;
1200 usc_process_rxoverrun_sync( info );
1201 }
1202
1203 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
1204 usc_UnlatchRxstatusBits( info, status );
1205
1206} /* end of mgsl_isr_receive_status() */
1207
1208/* mgsl_isr_transmit_status()
1209 *
1210 * Service a transmit status interrupt
1211 * HDLC mode :end of transmit frame
1212 * Async mode:all data is sent
1213 * transmit status is indicated by bits in the TCSR.
1214 *
1215 * Arguments: info pointer to device instance data
1216 * Return Value: None
1217 */
1218static void mgsl_isr_transmit_status( struct mgsl_struct *info )
1219{
1220 u16 status = usc_InReg( info, TCSR );
1221
1222 if ( debug_level >= DEBUG_LEVEL_ISR )
1223 printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
1224 __FILE__,__LINE__,status);
1225
1226 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
1227 usc_UnlatchTxstatusBits( info, status );
1228
1229 if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
1230 {
1231 /* finished sending HDLC abort. This may leave */
1232 /* the TxFifo with data from the aborted frame */
1233 /* so purge the TxFifo. Also shutdown the DMA */
1234 /* channel in case there is data remaining in */
1235 /* the DMA buffer */
1236 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
1237 usc_RTCmd( info, RTCmd_PurgeTxFifo );
1238 }
1239
1240 if ( status & TXSTATUS_EOF_SENT )
1241 info->icount.txok++;
1242 else if ( status & TXSTATUS_UNDERRUN )
1243 info->icount.txunder++;
1244 else if ( status & TXSTATUS_ABORT_SENT )
1245 info->icount.txabort++;
1246 else
1247 info->icount.txunder++;
1248
Joe Perches0fab6de2008-04-28 02:14:02 -07001249 info->tx_active = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001250 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1251 del_timer(&info->tx_timer);
1252
1253 if ( info->drop_rts_on_tx_done ) {
1254 usc_get_serial_signals( info );
1255 if ( info->serial_signals & SerialSignal_RTS ) {
1256 info->serial_signals &= ~SerialSignal_RTS;
1257 usc_set_serial_signals( info );
1258 }
Joe Perches0fab6de2008-04-28 02:14:02 -07001259 info->drop_rts_on_tx_done = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001260 }
1261
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08001262#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07001263 if (info->netcount)
1264 hdlcdev_tx_done(info);
1265 else
1266#endif
1267 {
Alan Cox8fb06c72008-07-16 21:56:46 +01001268 if (info->port.tty->stopped || info->port.tty->hw_stopped) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001269 usc_stop_transmitter(info);
1270 return;
1271 }
1272 info->pending_bh |= BH_TRANSMIT;
1273 }
1274
1275} /* end of mgsl_isr_transmit_status() */
1276
1277/* mgsl_isr_io_pin()
1278 *
1279 * Service an Input/Output pin interrupt. The type of
1280 * interrupt is indicated by bits in the MISR
1281 *
1282 * Arguments: info pointer to device instance data
1283 * Return Value: None
1284 */
1285static void mgsl_isr_io_pin( struct mgsl_struct *info )
1286{
1287 struct mgsl_icount *icount;
1288 u16 status = usc_InReg( info, MISR );
1289
1290 if ( debug_level >= DEBUG_LEVEL_ISR )
1291 printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
1292 __FILE__,__LINE__,status);
1293
1294 usc_ClearIrqPendingBits( info, IO_PIN );
1295 usc_UnlatchIostatusBits( info, status );
1296
1297 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
1298 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
1299 icount = &info->icount;
1300 /* update input line counters */
1301 if (status & MISCSTATUS_RI_LATCHED) {
1302 if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1303 usc_DisablestatusIrqs(info,SICR_RI);
1304 icount->rng++;
1305 if ( status & MISCSTATUS_RI )
1306 info->input_signal_events.ri_up++;
1307 else
1308 info->input_signal_events.ri_down++;
1309 }
1310 if (status & MISCSTATUS_DSR_LATCHED) {
1311 if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1312 usc_DisablestatusIrqs(info,SICR_DSR);
1313 icount->dsr++;
1314 if ( status & MISCSTATUS_DSR )
1315 info->input_signal_events.dsr_up++;
1316 else
1317 info->input_signal_events.dsr_down++;
1318 }
1319 if (status & MISCSTATUS_DCD_LATCHED) {
1320 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1321 usc_DisablestatusIrqs(info,SICR_DCD);
1322 icount->dcd++;
1323 if (status & MISCSTATUS_DCD) {
1324 info->input_signal_events.dcd_up++;
1325 } else
1326 info->input_signal_events.dcd_down++;
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08001327#if SYNCLINK_GENERIC_HDLC
Krzysztof Halasafbeff3c2006-07-21 14:44:55 -07001328 if (info->netcount) {
1329 if (status & MISCSTATUS_DCD)
1330 netif_carrier_on(info->netdev);
1331 else
1332 netif_carrier_off(info->netdev);
1333 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001334#endif
1335 }
1336 if (status & MISCSTATUS_CTS_LATCHED)
1337 {
1338 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1339 usc_DisablestatusIrqs(info,SICR_CTS);
1340 icount->cts++;
1341 if ( status & MISCSTATUS_CTS )
1342 info->input_signal_events.cts_up++;
1343 else
1344 info->input_signal_events.cts_down++;
1345 }
1346 wake_up_interruptible(&info->status_event_wait_q);
1347 wake_up_interruptible(&info->event_wait_q);
1348
Alan Cox8fb06c72008-07-16 21:56:46 +01001349 if ( (info->port.flags & ASYNC_CHECK_CD) &&
Linus Torvalds1da177e2005-04-16 15:20:36 -07001350 (status & MISCSTATUS_DCD_LATCHED) ) {
1351 if ( debug_level >= DEBUG_LEVEL_ISR )
1352 printk("%s CD now %s...", info->device_name,
1353 (status & MISCSTATUS_DCD) ? "on" : "off");
1354 if (status & MISCSTATUS_DCD)
Alan Cox8fb06c72008-07-16 21:56:46 +01001355 wake_up_interruptible(&info->port.open_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001356 else {
1357 if ( debug_level >= DEBUG_LEVEL_ISR )
1358 printk("doing serial hangup...");
Alan Cox8fb06c72008-07-16 21:56:46 +01001359 if (info->port.tty)
1360 tty_hangup(info->port.tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001361 }
1362 }
1363
Alan Cox8fb06c72008-07-16 21:56:46 +01001364 if ( (info->port.flags & ASYNC_CTS_FLOW) &&
Linus Torvalds1da177e2005-04-16 15:20:36 -07001365 (status & MISCSTATUS_CTS_LATCHED) ) {
Alan Cox8fb06c72008-07-16 21:56:46 +01001366 if (info->port.tty->hw_stopped) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001367 if (status & MISCSTATUS_CTS) {
1368 if ( debug_level >= DEBUG_LEVEL_ISR )
1369 printk("CTS tx start...");
Alan Cox8fb06c72008-07-16 21:56:46 +01001370 if (info->port.tty)
1371 info->port.tty->hw_stopped = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001372 usc_start_transmitter(info);
1373 info->pending_bh |= BH_TRANSMIT;
1374 return;
1375 }
1376 } else {
1377 if (!(status & MISCSTATUS_CTS)) {
1378 if ( debug_level >= DEBUG_LEVEL_ISR )
1379 printk("CTS tx stop...");
Alan Cox8fb06c72008-07-16 21:56:46 +01001380 if (info->port.tty)
1381 info->port.tty->hw_stopped = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001382 usc_stop_transmitter(info);
1383 }
1384 }
1385 }
1386 }
1387
1388 info->pending_bh |= BH_STATUS;
1389
1390 /* for diagnostics set IRQ flag */
1391 if ( status & MISCSTATUS_TXC_LATCHED ){
1392 usc_OutReg( info, SICR,
1393 (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) );
1394 usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED );
Joe Perches0fab6de2008-04-28 02:14:02 -07001395 info->irq_occurred = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001396 }
1397
1398} /* end of mgsl_isr_io_pin() */
1399
1400/* mgsl_isr_transmit_data()
1401 *
1402 * Service a transmit data interrupt (async mode only).
1403 *
1404 * Arguments: info pointer to device instance data
1405 * Return Value: None
1406 */
1407static void mgsl_isr_transmit_data( struct mgsl_struct *info )
1408{
1409 if ( debug_level >= DEBUG_LEVEL_ISR )
1410 printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
1411 __FILE__,__LINE__,info->xmit_cnt);
1412
1413 usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
1414
Alan Cox8fb06c72008-07-16 21:56:46 +01001415 if (info->port.tty->stopped || info->port.tty->hw_stopped) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001416 usc_stop_transmitter(info);
1417 return;
1418 }
1419
1420 if ( info->xmit_cnt )
1421 usc_load_txfifo( info );
1422 else
Joe Perches0fab6de2008-04-28 02:14:02 -07001423 info->tx_active = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001424
1425 if (info->xmit_cnt < WAKEUP_CHARS)
1426 info->pending_bh |= BH_TRANSMIT;
1427
1428} /* end of mgsl_isr_transmit_data() */
1429
1430/* mgsl_isr_receive_data()
1431 *
1432 * Service a receive data interrupt. This occurs
1433 * when operating in asynchronous interrupt transfer mode.
1434 * The receive data FIFO is flushed to the receive data buffers.
1435 *
1436 * Arguments: info pointer to device instance data
1437 * Return Value: None
1438 */
1439static void mgsl_isr_receive_data( struct mgsl_struct *info )
1440{
1441 int Fifocount;
1442 u16 status;
Alan Cox33f0f882006-01-09 20:54:13 -08001443 int work = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001444 unsigned char DataByte;
Alan Cox8fb06c72008-07-16 21:56:46 +01001445 struct tty_struct *tty = info->port.tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001446 struct mgsl_icount *icount = &info->icount;
1447
1448 if ( debug_level >= DEBUG_LEVEL_ISR )
1449 printk("%s(%d):mgsl_isr_receive_data\n",
1450 __FILE__,__LINE__);
1451
1452 usc_ClearIrqPendingBits( info, RECEIVE_DATA );
1453
1454 /* select FIFO status for RICR readback */
1455 usc_RCmd( info, RCmd_SelectRicrRxFifostatus );
1456
1457 /* clear the Wordstatus bit so that status readback */
1458 /* only reflects the status of this byte */
1459 usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 ));
1460
1461 /* flush the receive FIFO */
1462
1463 while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) {
Alan Cox33f0f882006-01-09 20:54:13 -08001464 int flag;
1465
Linus Torvalds1da177e2005-04-16 15:20:36 -07001466 /* read one byte from RxFIFO */
1467 outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY),
1468 info->io_base + CCAR );
1469 DataByte = inb( info->io_base + CCAR );
1470
1471 /* get the status of the received byte */
1472 status = usc_InReg(info, RCSR);
1473 if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
1474 RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) )
1475 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
1476
Linus Torvalds1da177e2005-04-16 15:20:36 -07001477 icount->rx++;
1478
Alan Cox33f0f882006-01-09 20:54:13 -08001479 flag = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001480 if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR +
1481 RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) {
1482 printk("rxerr=%04X\n",status);
1483 /* update error statistics */
1484 if ( status & RXSTATUS_BREAK_RECEIVED ) {
1485 status &= ~(RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR);
1486 icount->brk++;
1487 } else if (status & RXSTATUS_PARITY_ERROR)
1488 icount->parity++;
1489 else if (status & RXSTATUS_FRAMING_ERROR)
1490 icount->frame++;
1491 else if (status & RXSTATUS_OVERRUN) {
1492 /* must issue purge fifo cmd before */
1493 /* 16C32 accepts more receive chars */
1494 usc_RTCmd(info,RTCmd_PurgeRxFifo);
1495 icount->overrun++;
1496 }
1497
1498 /* discard char if tty control flags say so */
1499 if (status & info->ignore_status_mask)
1500 continue;
1501
1502 status &= info->read_status_mask;
1503
1504 if (status & RXSTATUS_BREAK_RECEIVED) {
Alan Cox33f0f882006-01-09 20:54:13 -08001505 flag = TTY_BREAK;
Alan Cox8fb06c72008-07-16 21:56:46 +01001506 if (info->port.flags & ASYNC_SAK)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001507 do_SAK(tty);
1508 } else if (status & RXSTATUS_PARITY_ERROR)
Alan Cox33f0f882006-01-09 20:54:13 -08001509 flag = TTY_PARITY;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001510 else if (status & RXSTATUS_FRAMING_ERROR)
Alan Cox33f0f882006-01-09 20:54:13 -08001511 flag = TTY_FRAME;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001512 } /* end of if (error) */
Alan Cox33f0f882006-01-09 20:54:13 -08001513 tty_insert_flip_char(tty, DataByte, flag);
1514 if (status & RXSTATUS_OVERRUN) {
1515 /* Overrun is special, since it's
1516 * reported immediately, and doesn't
1517 * affect the current character
1518 */
1519 work += tty_insert_flip_char(tty, 0, TTY_OVERRUN);
1520 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001521 }
1522
1523 if ( debug_level >= DEBUG_LEVEL_ISR ) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001524 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
1525 __FILE__,__LINE__,icount->rx,icount->brk,
1526 icount->parity,icount->frame,icount->overrun);
1527 }
1528
Alan Cox33f0f882006-01-09 20:54:13 -08001529 if(work)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001530 tty_flip_buffer_push(tty);
1531}
1532
1533/* mgsl_isr_misc()
1534 *
Joe Perches8dfba4d2008-02-03 17:11:42 +02001535 * Service a miscellaneous interrupt source.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001536 *
1537 * Arguments: info pointer to device extension (instance data)
1538 * Return Value: None
1539 */
1540static void mgsl_isr_misc( struct mgsl_struct *info )
1541{
1542 u16 status = usc_InReg( info, MISR );
1543
1544 if ( debug_level >= DEBUG_LEVEL_ISR )
1545 printk("%s(%d):mgsl_isr_misc status=%04X\n",
1546 __FILE__,__LINE__,status);
1547
1548 if ((status & MISCSTATUS_RCC_UNDERRUN) &&
1549 (info->params.mode == MGSL_MODE_HDLC)) {
1550
1551 /* turn off receiver and rx DMA */
1552 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
1553 usc_DmaCmd(info, DmaCmd_ResetRxChannel);
1554 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
1555 usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
1556 usc_DisableInterrupts(info, RECEIVE_DATA + RECEIVE_STATUS);
1557
1558 /* schedule BH handler to restart receiver */
1559 info->pending_bh |= BH_RECEIVE;
Joe Perches0fab6de2008-04-28 02:14:02 -07001560 info->rx_rcc_underrun = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001561 }
1562
1563 usc_ClearIrqPendingBits( info, MISC );
1564 usc_UnlatchMiscstatusBits( info, status );
1565
1566} /* end of mgsl_isr_misc() */
1567
1568/* mgsl_isr_null()
1569 *
1570 * Services undefined interrupt vectors from the
1571 * USC. (hence this function SHOULD never be called)
1572 *
1573 * Arguments: info pointer to device extension (instance data)
1574 * Return Value: None
1575 */
1576static void mgsl_isr_null( struct mgsl_struct *info )
1577{
1578
1579} /* end of mgsl_isr_null() */
1580
1581/* mgsl_isr_receive_dma()
1582 *
1583 * Service a receive DMA channel interrupt.
1584 * For this driver there are two sources of receive DMA interrupts
1585 * as identified in the Receive DMA mode Register (RDMR):
1586 *
1587 * BIT3 EOA/EOL End of List, all receive buffers in receive
1588 * buffer list have been filled (no more free buffers
1589 * available). The DMA controller has shut down.
1590 *
1591 * BIT2 EOB End of Buffer. This interrupt occurs when a receive
1592 * DMA buffer is terminated in response to completion
1593 * of a good frame or a frame with errors. The status
1594 * of the frame is stored in the buffer entry in the
1595 * list of receive buffer entries.
1596 *
1597 * Arguments: info pointer to device instance data
1598 * Return Value: None
1599 */
1600static void mgsl_isr_receive_dma( struct mgsl_struct *info )
1601{
1602 u16 status;
1603
1604 /* clear interrupt pending and IUS bit for Rx DMA IRQ */
1605 usc_OutDmaReg( info, CDIR, BIT9+BIT1 );
1606
1607 /* Read the receive DMA status to identify interrupt type. */
1608 /* This also clears the status bits. */
1609 status = usc_InDmaReg( info, RDMR );
1610
1611 if ( debug_level >= DEBUG_LEVEL_ISR )
1612 printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
1613 __FILE__,__LINE__,info->device_name,status);
1614
1615 info->pending_bh |= BH_RECEIVE;
1616
1617 if ( status & BIT3 ) {
Joe Perches0fab6de2008-04-28 02:14:02 -07001618 info->rx_overflow = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001619 info->icount.buf_overrun++;
1620 }
1621
1622} /* end of mgsl_isr_receive_dma() */
1623
1624/* mgsl_isr_transmit_dma()
1625 *
1626 * This function services a transmit DMA channel interrupt.
1627 *
1628 * For this driver there is one source of transmit DMA interrupts
1629 * as identified in the Transmit DMA Mode Register (TDMR):
1630 *
1631 * BIT2 EOB End of Buffer. This interrupt occurs when a
1632 * transmit DMA buffer has been emptied.
1633 *
1634 * The driver maintains enough transmit DMA buffers to hold at least
1635 * one max frame size transmit frame. When operating in a buffered
1636 * transmit mode, there may be enough transmit DMA buffers to hold at
1637 * least two or more max frame size frames. On an EOB condition,
1638 * determine if there are any queued transmit buffers and copy into
1639 * transmit DMA buffers if we have room.
1640 *
1641 * Arguments: info pointer to device instance data
1642 * Return Value: None
1643 */
1644static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
1645{
1646 u16 status;
1647
1648 /* clear interrupt pending and IUS bit for Tx DMA IRQ */
1649 usc_OutDmaReg(info, CDIR, BIT8+BIT0 );
1650
1651 /* Read the transmit DMA status to identify interrupt type. */
1652 /* This also clears the status bits. */
1653
1654 status = usc_InDmaReg( info, TDMR );
1655
1656 if ( debug_level >= DEBUG_LEVEL_ISR )
1657 printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n",
1658 __FILE__,__LINE__,info->device_name,status);
1659
1660 if ( status & BIT2 ) {
1661 --info->tx_dma_buffers_used;
1662
1663 /* if there are transmit frames queued,
1664 * try to load the next one
1665 */
1666 if ( load_next_tx_holding_buffer(info) ) {
1667 /* if call returns non-zero value, we have
1668 * at least one free tx holding buffer
1669 */
1670 info->pending_bh |= BH_TRANSMIT;
1671 }
1672 }
1673
1674} /* end of mgsl_isr_transmit_dma() */
1675
1676/* mgsl_interrupt()
1677 *
1678 * Interrupt service routine entry point.
1679 *
1680 * Arguments:
1681 *
1682 * irq interrupt number that caused interrupt
1683 * dev_id device ID supplied during interrupt registration
Linus Torvalds1da177e2005-04-16 15:20:36 -07001684 *
1685 * Return Value: None
1686 */
Jeff Garzika6f97b22007-10-31 05:20:49 -04001687static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001688{
Jeff Garzika6f97b22007-10-31 05:20:49 -04001689 struct mgsl_struct *info = dev_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001690 u16 UscVector;
1691 u16 DmaVector;
1692
1693 if ( debug_level >= DEBUG_LEVEL_ISR )
Jeff Garzika6f97b22007-10-31 05:20:49 -04001694 printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n",
1695 __FILE__, __LINE__, info->irq_level);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001696
Linus Torvalds1da177e2005-04-16 15:20:36 -07001697 spin_lock(&info->irq_spinlock);
1698
1699 for(;;) {
1700 /* Read the interrupt vectors from hardware. */
1701 UscVector = usc_InReg(info, IVR) >> 9;
1702 DmaVector = usc_InDmaReg(info, DIVR);
1703
1704 if ( debug_level >= DEBUG_LEVEL_ISR )
1705 printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
1706 __FILE__,__LINE__,info->device_name,UscVector,DmaVector);
1707
1708 if ( !UscVector && !DmaVector )
1709 break;
1710
1711 /* Dispatch interrupt vector */
1712 if ( UscVector )
1713 (*UscIsrTable[UscVector])(info);
1714 else if ( (DmaVector&(BIT10|BIT9)) == BIT10)
1715 mgsl_isr_transmit_dma(info);
1716 else
1717 mgsl_isr_receive_dma(info);
1718
1719 if ( info->isr_overflow ) {
Jeff Garzika6f97b22007-10-31 05:20:49 -04001720 printk(KERN_ERR "%s(%d):%s isr overflow irq=%d\n",
1721 __FILE__, __LINE__, info->device_name, info->irq_level);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001722 usc_DisableMasterIrqBit(info);
1723 usc_DisableDmaInterrupts(info,DICR_MASTER);
1724 break;
1725 }
1726 }
1727
1728 /* Request bottom half processing if there's something
1729 * for it to do and the bh is not already running
1730 */
1731
1732 if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
1733 if ( debug_level >= DEBUG_LEVEL_ISR )
1734 printk("%s(%d):%s queueing bh task.\n",
1735 __FILE__,__LINE__,info->device_name);
1736 schedule_work(&info->task);
Joe Perches0fab6de2008-04-28 02:14:02 -07001737 info->bh_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001738 }
1739
1740 spin_unlock(&info->irq_spinlock);
1741
1742 if ( debug_level >= DEBUG_LEVEL_ISR )
Jeff Garzika6f97b22007-10-31 05:20:49 -04001743 printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n",
1744 __FILE__, __LINE__, info->irq_level);
1745
Linus Torvalds1da177e2005-04-16 15:20:36 -07001746 return IRQ_HANDLED;
1747} /* end of mgsl_interrupt() */
1748
1749/* startup()
1750 *
1751 * Initialize and start device.
1752 *
1753 * Arguments: info pointer to device instance data
1754 * Return Value: 0 if success, otherwise error code
1755 */
1756static int startup(struct mgsl_struct * info)
1757{
1758 int retval = 0;
1759
1760 if ( debug_level >= DEBUG_LEVEL_INFO )
1761 printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name);
1762
Alan Cox8fb06c72008-07-16 21:56:46 +01001763 if (info->port.flags & ASYNC_INITIALIZED)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001764 return 0;
1765
1766 if (!info->xmit_buf) {
1767 /* allocate a page of memory for a transmit buffer */
1768 info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1769 if (!info->xmit_buf) {
1770 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1771 __FILE__,__LINE__,info->device_name);
1772 return -ENOMEM;
1773 }
1774 }
1775
1776 info->pending_bh = 0;
1777
Paul Fulghum96612392005-09-09 13:02:13 -07001778 memset(&info->icount, 0, sizeof(info->icount));
1779
Jiri Slaby40565f12007-02-12 00:52:31 -08001780 setup_timer(&info->tx_timer, mgsl_tx_timeout, (unsigned long)info);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001781
1782 /* Allocate and claim adapter resources */
1783 retval = mgsl_claim_resources(info);
1784
1785 /* perform existence check and diagnostics */
1786 if ( !retval )
1787 retval = mgsl_adapter_test(info);
1788
1789 if ( retval ) {
Alan Cox8fb06c72008-07-16 21:56:46 +01001790 if (capable(CAP_SYS_ADMIN) && info->port.tty)
1791 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001792 mgsl_release_resources(info);
1793 return retval;
1794 }
1795
1796 /* program hardware for current parameters */
1797 mgsl_change_params(info);
1798
Alan Cox8fb06c72008-07-16 21:56:46 +01001799 if (info->port.tty)
1800 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001801
Alan Cox8fb06c72008-07-16 21:56:46 +01001802 info->port.flags |= ASYNC_INITIALIZED;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001803
1804 return 0;
1805
1806} /* end of startup() */
1807
1808/* shutdown()
1809 *
1810 * Called by mgsl_close() and mgsl_hangup() to shutdown hardware
1811 *
1812 * Arguments: info pointer to device instance data
1813 * Return Value: None
1814 */
1815static void shutdown(struct mgsl_struct * info)
1816{
1817 unsigned long flags;
1818
Alan Cox8fb06c72008-07-16 21:56:46 +01001819 if (!(info->port.flags & ASYNC_INITIALIZED))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001820 return;
1821
1822 if (debug_level >= DEBUG_LEVEL_INFO)
1823 printk("%s(%d):mgsl_shutdown(%s)\n",
1824 __FILE__,__LINE__, info->device_name );
1825
1826 /* clear status wait queue because status changes */
1827 /* can't happen after shutting down the hardware */
1828 wake_up_interruptible(&info->status_event_wait_q);
1829 wake_up_interruptible(&info->event_wait_q);
1830
Jiri Slaby40565f12007-02-12 00:52:31 -08001831 del_timer_sync(&info->tx_timer);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001832
1833 if (info->xmit_buf) {
1834 free_page((unsigned long) info->xmit_buf);
1835 info->xmit_buf = NULL;
1836 }
1837
1838 spin_lock_irqsave(&info->irq_spinlock,flags);
1839 usc_DisableMasterIrqBit(info);
1840 usc_stop_receiver(info);
1841 usc_stop_transmitter(info);
1842 usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS +
1843 TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC );
1844 usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE);
1845
1846 /* Disable DMAEN (Port 7, Bit 14) */
1847 /* This disconnects the DMA request signal from the ISA bus */
1848 /* on the ISA adapter. This has no effect for the PCI adapter */
1849 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14));
1850
1851 /* Disable INTEN (Port 6, Bit12) */
1852 /* This disconnects the IRQ request signal to the ISA bus */
1853 /* on the ISA adapter. This has no effect for the PCI adapter */
1854 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
1855
Alan Cox8fb06c72008-07-16 21:56:46 +01001856 if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001857 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
1858 usc_set_serial_signals(info);
1859 }
1860
1861 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1862
1863 mgsl_release_resources(info);
1864
Alan Cox8fb06c72008-07-16 21:56:46 +01001865 if (info->port.tty)
1866 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001867
Alan Cox8fb06c72008-07-16 21:56:46 +01001868 info->port.flags &= ~ASYNC_INITIALIZED;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001869
1870} /* end of shutdown() */
1871
1872static void mgsl_program_hw(struct mgsl_struct *info)
1873{
1874 unsigned long flags;
1875
1876 spin_lock_irqsave(&info->irq_spinlock,flags);
1877
1878 usc_stop_receiver(info);
1879 usc_stop_transmitter(info);
1880 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1881
1882 if (info->params.mode == MGSL_MODE_HDLC ||
1883 info->params.mode == MGSL_MODE_RAW ||
1884 info->netcount)
1885 usc_set_sync_mode(info);
1886 else
1887 usc_set_async_mode(info);
1888
1889 usc_set_serial_signals(info);
1890
1891 info->dcd_chkcount = 0;
1892 info->cts_chkcount = 0;
1893 info->ri_chkcount = 0;
1894 info->dsr_chkcount = 0;
1895
1896 usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
1897 usc_EnableInterrupts(info, IO_PIN);
1898 usc_get_serial_signals(info);
1899
Alan Cox8fb06c72008-07-16 21:56:46 +01001900 if (info->netcount || info->port.tty->termios->c_cflag & CREAD)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001901 usc_start_receiver(info);
1902
1903 spin_unlock_irqrestore(&info->irq_spinlock,flags);
1904}
1905
1906/* Reconfigure adapter based on new parameters
1907 */
1908static void mgsl_change_params(struct mgsl_struct *info)
1909{
1910 unsigned cflag;
1911 int bits_per_char;
1912
Alan Cox8fb06c72008-07-16 21:56:46 +01001913 if (!info->port.tty || !info->port.tty->termios)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001914 return;
1915
1916 if (debug_level >= DEBUG_LEVEL_INFO)
1917 printk("%s(%d):mgsl_change_params(%s)\n",
1918 __FILE__,__LINE__, info->device_name );
1919
Alan Cox8fb06c72008-07-16 21:56:46 +01001920 cflag = info->port.tty->termios->c_cflag;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001921
1922 /* if B0 rate (hangup) specified then negate DTR and RTS */
1923 /* otherwise assert DTR and RTS */
1924 if (cflag & CBAUD)
1925 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1926 else
1927 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
1928
1929 /* byte size and parity */
1930
1931 switch (cflag & CSIZE) {
1932 case CS5: info->params.data_bits = 5; break;
1933 case CS6: info->params.data_bits = 6; break;
1934 case CS7: info->params.data_bits = 7; break;
1935 case CS8: info->params.data_bits = 8; break;
1936 /* Never happens, but GCC is too dumb to figure it out */
1937 default: info->params.data_bits = 7; break;
1938 }
1939
1940 if (cflag & CSTOPB)
1941 info->params.stop_bits = 2;
1942 else
1943 info->params.stop_bits = 1;
1944
1945 info->params.parity = ASYNC_PARITY_NONE;
1946 if (cflag & PARENB) {
1947 if (cflag & PARODD)
1948 info->params.parity = ASYNC_PARITY_ODD;
1949 else
1950 info->params.parity = ASYNC_PARITY_EVEN;
1951#ifdef CMSPAR
1952 if (cflag & CMSPAR)
1953 info->params.parity = ASYNC_PARITY_SPACE;
1954#endif
1955 }
1956
1957 /* calculate number of jiffies to transmit a full
1958 * FIFO (32 bytes) at specified data rate
1959 */
1960 bits_per_char = info->params.data_bits +
1961 info->params.stop_bits + 1;
1962
1963 /* if port data rate is set to 460800 or less then
1964 * allow tty settings to override, otherwise keep the
1965 * current data rate.
1966 */
1967 if (info->params.data_rate <= 460800)
Alan Cox8fb06c72008-07-16 21:56:46 +01001968 info->params.data_rate = tty_get_baud_rate(info->port.tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001969
1970 if ( info->params.data_rate ) {
1971 info->timeout = (32*HZ*bits_per_char) /
1972 info->params.data_rate;
1973 }
1974 info->timeout += HZ/50; /* Add .02 seconds of slop */
1975
1976 if (cflag & CRTSCTS)
Alan Cox8fb06c72008-07-16 21:56:46 +01001977 info->port.flags |= ASYNC_CTS_FLOW;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001978 else
Alan Cox8fb06c72008-07-16 21:56:46 +01001979 info->port.flags &= ~ASYNC_CTS_FLOW;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001980
1981 if (cflag & CLOCAL)
Alan Cox8fb06c72008-07-16 21:56:46 +01001982 info->port.flags &= ~ASYNC_CHECK_CD;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001983 else
Alan Cox8fb06c72008-07-16 21:56:46 +01001984 info->port.flags |= ASYNC_CHECK_CD;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001985
1986 /* process tty input control flags */
1987
1988 info->read_status_mask = RXSTATUS_OVERRUN;
Alan Cox8fb06c72008-07-16 21:56:46 +01001989 if (I_INPCK(info->port.tty))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001990 info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
Alan Cox8fb06c72008-07-16 21:56:46 +01001991 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001992 info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
1993
Alan Cox8fb06c72008-07-16 21:56:46 +01001994 if (I_IGNPAR(info->port.tty))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001995 info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
Alan Cox8fb06c72008-07-16 21:56:46 +01001996 if (I_IGNBRK(info->port.tty)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001997 info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
1998 /* If ignoring parity and break indicators, ignore
1999 * overruns too. (For real raw support).
2000 */
Alan Cox8fb06c72008-07-16 21:56:46 +01002001 if (I_IGNPAR(info->port.tty))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002002 info->ignore_status_mask |= RXSTATUS_OVERRUN;
2003 }
2004
2005 mgsl_program_hw(info);
2006
2007} /* end of mgsl_change_params() */
2008
2009/* mgsl_put_char()
2010 *
2011 * Add a character to the transmit buffer.
2012 *
2013 * Arguments: tty pointer to tty information structure
2014 * ch character to add to transmit buffer
2015 *
2016 * Return Value: None
2017 */
Alan Cox55da7782008-04-30 00:54:07 -07002018static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002019{
Andrew Morton07648232008-05-01 04:35:18 -07002020 struct mgsl_struct *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002021 unsigned long flags;
Andrew Morton07648232008-05-01 04:35:18 -07002022 int ret = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002023
Andrew Morton07648232008-05-01 04:35:18 -07002024 if (debug_level >= DEBUG_LEVEL_INFO) {
Andrew Morton50980212008-05-01 04:35:19 -07002025 printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
Andrew Morton07648232008-05-01 04:35:18 -07002026 __FILE__, __LINE__, ch, info->device_name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002027 }
2028
2029 if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
Alan Cox55da7782008-04-30 00:54:07 -07002030 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002031
2032 if (!tty || !info->xmit_buf)
Alan Cox55da7782008-04-30 00:54:07 -07002033 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002034
Andrew Morton07648232008-05-01 04:35:18 -07002035 spin_lock_irqsave(&info->irq_spinlock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002036
Andrew Morton07648232008-05-01 04:35:18 -07002037 if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002038 if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
2039 info->xmit_buf[info->xmit_head++] = ch;
2040 info->xmit_head &= SERIAL_XMIT_SIZE-1;
2041 info->xmit_cnt++;
Alan Cox55da7782008-04-30 00:54:07 -07002042 ret = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002043 }
2044 }
Andrew Morton07648232008-05-01 04:35:18 -07002045 spin_unlock_irqrestore(&info->irq_spinlock, flags);
Alan Cox55da7782008-04-30 00:54:07 -07002046 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002047
2048} /* end of mgsl_put_char() */
2049
2050/* mgsl_flush_chars()
2051 *
2052 * Enable transmitter so remaining characters in the
2053 * transmit buffer are sent.
2054 *
2055 * Arguments: tty pointer to tty information structure
2056 * Return Value: None
2057 */
2058static void mgsl_flush_chars(struct tty_struct *tty)
2059{
2060 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2061 unsigned long flags;
2062
2063 if ( debug_level >= DEBUG_LEVEL_INFO )
2064 printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
2065 __FILE__,__LINE__,info->device_name,info->xmit_cnt);
2066
2067 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
2068 return;
2069
2070 if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
2071 !info->xmit_buf)
2072 return;
2073
2074 if ( debug_level >= DEBUG_LEVEL_INFO )
2075 printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n",
2076 __FILE__,__LINE__,info->device_name );
2077
2078 spin_lock_irqsave(&info->irq_spinlock,flags);
2079
2080 if (!info->tx_active) {
2081 if ( (info->params.mode == MGSL_MODE_HDLC ||
2082 info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
2083 /* operating in synchronous (frame oriented) mode */
2084 /* copy data from circular xmit_buf to */
2085 /* transmit DMA buffer. */
2086 mgsl_load_tx_dma_buffer(info,
2087 info->xmit_buf,info->xmit_cnt);
2088 }
2089 usc_start_transmitter(info);
2090 }
2091
2092 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2093
2094} /* end of mgsl_flush_chars() */
2095
2096/* mgsl_write()
2097 *
2098 * Send a block of data
2099 *
2100 * Arguments:
2101 *
2102 * tty pointer to tty information structure
2103 * buf pointer to buffer containing send data
2104 * count size of send data in bytes
2105 *
2106 * Return Value: number of characters written
2107 */
2108static int mgsl_write(struct tty_struct * tty,
2109 const unsigned char *buf, int count)
2110{
2111 int c, ret = 0;
2112 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2113 unsigned long flags;
2114
2115 if ( debug_level >= DEBUG_LEVEL_INFO )
2116 printk( "%s(%d):mgsl_write(%s) count=%d\n",
2117 __FILE__,__LINE__,info->device_name,count);
2118
2119 if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
2120 goto cleanup;
2121
Paul Fulghum86a34142006-03-28 01:56:14 -08002122 if (!tty || !info->xmit_buf)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002123 goto cleanup;
2124
2125 if ( info->params.mode == MGSL_MODE_HDLC ||
2126 info->params.mode == MGSL_MODE_RAW ) {
2127 /* operating in synchronous (frame oriented) mode */
2128 /* operating in synchronous (frame oriented) mode */
2129 if (info->tx_active) {
2130
2131 if ( info->params.mode == MGSL_MODE_HDLC ) {
2132 ret = 0;
2133 goto cleanup;
2134 }
2135 /* transmitter is actively sending data -
2136 * if we have multiple transmit dma and
2137 * holding buffers, attempt to queue this
2138 * frame for transmission at a later time.
2139 */
2140 if (info->tx_holding_count >= info->num_tx_holding_buffers ) {
2141 /* no tx holding buffers available */
2142 ret = 0;
2143 goto cleanup;
2144 }
2145
2146 /* queue transmit frame request */
2147 ret = count;
2148 save_tx_buffer_request(info,buf,count);
2149
2150 /* if we have sufficient tx dma buffers,
2151 * load the next buffered tx request
2152 */
2153 spin_lock_irqsave(&info->irq_spinlock,flags);
2154 load_next_tx_holding_buffer(info);
2155 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2156 goto cleanup;
2157 }
2158
2159 /* if operating in HDLC LoopMode and the adapter */
2160 /* has yet to be inserted into the loop, we can't */
2161 /* transmit */
2162
2163 if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) &&
2164 !usc_loopmode_active(info) )
2165 {
2166 ret = 0;
2167 goto cleanup;
2168 }
2169
2170 if ( info->xmit_cnt ) {
2171 /* Send accumulated from send_char() calls */
2172 /* as frame and wait before accepting more data. */
2173 ret = 0;
2174
2175 /* copy data from circular xmit_buf to */
2176 /* transmit DMA buffer. */
2177 mgsl_load_tx_dma_buffer(info,
2178 info->xmit_buf,info->xmit_cnt);
2179 if ( debug_level >= DEBUG_LEVEL_INFO )
2180 printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n",
2181 __FILE__,__LINE__,info->device_name);
2182 } else {
2183 if ( debug_level >= DEBUG_LEVEL_INFO )
2184 printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n",
2185 __FILE__,__LINE__,info->device_name);
2186 ret = count;
2187 info->xmit_cnt = count;
2188 mgsl_load_tx_dma_buffer(info,buf,count);
2189 }
2190 } else {
2191 while (1) {
2192 spin_lock_irqsave(&info->irq_spinlock,flags);
2193 c = min_t(int, count,
2194 min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
2195 SERIAL_XMIT_SIZE - info->xmit_head));
2196 if (c <= 0) {
2197 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2198 break;
2199 }
2200 memcpy(info->xmit_buf + info->xmit_head, buf, c);
2201 info->xmit_head = ((info->xmit_head + c) &
2202 (SERIAL_XMIT_SIZE-1));
2203 info->xmit_cnt += c;
2204 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2205 buf += c;
2206 count -= c;
2207 ret += c;
2208 }
2209 }
2210
2211 if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
2212 spin_lock_irqsave(&info->irq_spinlock,flags);
2213 if (!info->tx_active)
2214 usc_start_transmitter(info);
2215 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2216 }
2217cleanup:
2218 if ( debug_level >= DEBUG_LEVEL_INFO )
2219 printk( "%s(%d):mgsl_write(%s) returning=%d\n",
2220 __FILE__,__LINE__,info->device_name,ret);
2221
2222 return ret;
2223
2224} /* end of mgsl_write() */
2225
2226/* mgsl_write_room()
2227 *
2228 * Return the count of free bytes in transmit buffer
2229 *
2230 * Arguments: tty pointer to tty info structure
2231 * Return Value: None
2232 */
2233static int mgsl_write_room(struct tty_struct *tty)
2234{
2235 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2236 int ret;
2237
2238 if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
2239 return 0;
2240 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
2241 if (ret < 0)
2242 ret = 0;
2243
2244 if (debug_level >= DEBUG_LEVEL_INFO)
2245 printk("%s(%d):mgsl_write_room(%s)=%d\n",
2246 __FILE__,__LINE__, info->device_name,ret );
2247
2248 if ( info->params.mode == MGSL_MODE_HDLC ||
2249 info->params.mode == MGSL_MODE_RAW ) {
2250 /* operating in synchronous (frame oriented) mode */
2251 if ( info->tx_active )
2252 return 0;
2253 else
2254 return HDLC_MAX_FRAME_SIZE;
2255 }
2256
2257 return ret;
2258
2259} /* end of mgsl_write_room() */
2260
2261/* mgsl_chars_in_buffer()
2262 *
2263 * Return the count of bytes in transmit buffer
2264 *
2265 * Arguments: tty pointer to tty info structure
2266 * Return Value: None
2267 */
2268static int mgsl_chars_in_buffer(struct tty_struct *tty)
2269{
2270 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2271
2272 if (debug_level >= DEBUG_LEVEL_INFO)
2273 printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
2274 __FILE__,__LINE__, info->device_name );
2275
2276 if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
2277 return 0;
2278
2279 if (debug_level >= DEBUG_LEVEL_INFO)
2280 printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
2281 __FILE__,__LINE__, info->device_name,info->xmit_cnt );
2282
2283 if ( info->params.mode == MGSL_MODE_HDLC ||
2284 info->params.mode == MGSL_MODE_RAW ) {
2285 /* operating in synchronous (frame oriented) mode */
2286 if ( info->tx_active )
2287 return info->max_frame_size;
2288 else
2289 return 0;
2290 }
2291
2292 return info->xmit_cnt;
2293} /* end of mgsl_chars_in_buffer() */
2294
2295/* mgsl_flush_buffer()
2296 *
2297 * Discard all data in the send buffer
2298 *
2299 * Arguments: tty pointer to tty info structure
2300 * Return Value: None
2301 */
2302static void mgsl_flush_buffer(struct tty_struct *tty)
2303{
2304 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2305 unsigned long flags;
2306
2307 if (debug_level >= DEBUG_LEVEL_INFO)
2308 printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
2309 __FILE__,__LINE__, info->device_name );
2310
2311 if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
2312 return;
2313
2314 spin_lock_irqsave(&info->irq_spinlock,flags);
2315 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
2316 del_timer(&info->tx_timer);
2317 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2318
Linus Torvalds1da177e2005-04-16 15:20:36 -07002319 tty_wakeup(tty);
2320}
2321
2322/* mgsl_send_xchar()
2323 *
2324 * Send a high-priority XON/XOFF character
2325 *
2326 * Arguments: tty pointer to tty info structure
2327 * ch character to send
2328 * Return Value: None
2329 */
2330static void mgsl_send_xchar(struct tty_struct *tty, char ch)
2331{
2332 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2333 unsigned long flags;
2334
2335 if (debug_level >= DEBUG_LEVEL_INFO)
2336 printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
2337 __FILE__,__LINE__, info->device_name, ch );
2338
2339 if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
2340 return;
2341
2342 info->x_char = ch;
2343 if (ch) {
2344 /* Make sure transmit interrupts are on */
2345 spin_lock_irqsave(&info->irq_spinlock,flags);
2346 if (!info->tx_enabled)
2347 usc_start_transmitter(info);
2348 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2349 }
2350} /* end of mgsl_send_xchar() */
2351
2352/* mgsl_throttle()
2353 *
2354 * Signal remote device to throttle send data (our receive data)
2355 *
2356 * Arguments: tty pointer to tty info structure
2357 * Return Value: None
2358 */
2359static void mgsl_throttle(struct tty_struct * tty)
2360{
2361 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2362 unsigned long flags;
2363
2364 if (debug_level >= DEBUG_LEVEL_INFO)
2365 printk("%s(%d):mgsl_throttle(%s) entry\n",
2366 __FILE__,__LINE__, info->device_name );
2367
2368 if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
2369 return;
2370
2371 if (I_IXOFF(tty))
2372 mgsl_send_xchar(tty, STOP_CHAR(tty));
2373
2374 if (tty->termios->c_cflag & CRTSCTS) {
2375 spin_lock_irqsave(&info->irq_spinlock,flags);
2376 info->serial_signals &= ~SerialSignal_RTS;
2377 usc_set_serial_signals(info);
2378 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2379 }
2380} /* end of mgsl_throttle() */
2381
2382/* mgsl_unthrottle()
2383 *
2384 * Signal remote device to stop throttling send data (our receive data)
2385 *
2386 * Arguments: tty pointer to tty info structure
2387 * Return Value: None
2388 */
2389static void mgsl_unthrottle(struct tty_struct * tty)
2390{
2391 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2392 unsigned long flags;
2393
2394 if (debug_level >= DEBUG_LEVEL_INFO)
2395 printk("%s(%d):mgsl_unthrottle(%s) entry\n",
2396 __FILE__,__LINE__, info->device_name );
2397
2398 if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
2399 return;
2400
2401 if (I_IXOFF(tty)) {
2402 if (info->x_char)
2403 info->x_char = 0;
2404 else
2405 mgsl_send_xchar(tty, START_CHAR(tty));
2406 }
2407
2408 if (tty->termios->c_cflag & CRTSCTS) {
2409 spin_lock_irqsave(&info->irq_spinlock,flags);
2410 info->serial_signals |= SerialSignal_RTS;
2411 usc_set_serial_signals(info);
2412 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2413 }
2414
2415} /* end of mgsl_unthrottle() */
2416
2417/* mgsl_get_stats()
2418 *
2419 * get the current serial parameters information
2420 *
2421 * Arguments: info pointer to device instance data
2422 * user_icount pointer to buffer to hold returned stats
2423 *
2424 * Return Value: 0 if success, otherwise error code
2425 */
2426static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
2427{
2428 int err;
2429
2430 if (debug_level >= DEBUG_LEVEL_INFO)
2431 printk("%s(%d):mgsl_get_params(%s)\n",
2432 __FILE__,__LINE__, info->device_name);
2433
Paul Fulghum96612392005-09-09 13:02:13 -07002434 if (!user_icount) {
2435 memset(&info->icount, 0, sizeof(info->icount));
2436 } else {
2437 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2438 if (err)
2439 return -EFAULT;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002440 }
2441
2442 return 0;
2443
2444} /* end of mgsl_get_stats() */
2445
2446/* mgsl_get_params()
2447 *
2448 * get the current serial parameters information
2449 *
2450 * Arguments: info pointer to device instance data
2451 * user_params pointer to buffer to hold returned params
2452 *
2453 * Return Value: 0 if success, otherwise error code
2454 */
2455static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
2456{
2457 int err;
2458 if (debug_level >= DEBUG_LEVEL_INFO)
2459 printk("%s(%d):mgsl_get_params(%s)\n",
2460 __FILE__,__LINE__, info->device_name);
2461
2462 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2463 if (err) {
2464 if ( debug_level >= DEBUG_LEVEL_INFO )
2465 printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n",
2466 __FILE__,__LINE__,info->device_name);
2467 return -EFAULT;
2468 }
2469
2470 return 0;
2471
2472} /* end of mgsl_get_params() */
2473
2474/* mgsl_set_params()
2475 *
2476 * set the serial parameters
2477 *
2478 * Arguments:
2479 *
2480 * info pointer to device instance data
2481 * new_params user buffer containing new serial params
2482 *
2483 * Return Value: 0 if success, otherwise error code
2484 */
2485static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params)
2486{
2487 unsigned long flags;
2488 MGSL_PARAMS tmp_params;
2489 int err;
2490
2491 if (debug_level >= DEBUG_LEVEL_INFO)
2492 printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
2493 info->device_name );
2494 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2495 if (err) {
2496 if ( debug_level >= DEBUG_LEVEL_INFO )
2497 printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n",
2498 __FILE__,__LINE__,info->device_name);
2499 return -EFAULT;
2500 }
2501
2502 spin_lock_irqsave(&info->irq_spinlock,flags);
2503 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2504 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2505
2506 mgsl_change_params(info);
2507
2508 return 0;
2509
2510} /* end of mgsl_set_params() */
2511
2512/* mgsl_get_txidle()
2513 *
2514 * get the current transmit idle mode
2515 *
2516 * Arguments: info pointer to device instance data
2517 * idle_mode pointer to buffer to hold returned idle mode
2518 *
2519 * Return Value: 0 if success, otherwise error code
2520 */
2521static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
2522{
2523 int err;
2524
2525 if (debug_level >= DEBUG_LEVEL_INFO)
2526 printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
2527 __FILE__,__LINE__, info->device_name, info->idle_mode);
2528
2529 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2530 if (err) {
2531 if ( debug_level >= DEBUG_LEVEL_INFO )
2532 printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n",
2533 __FILE__,__LINE__,info->device_name);
2534 return -EFAULT;
2535 }
2536
2537 return 0;
2538
2539} /* end of mgsl_get_txidle() */
2540
2541/* mgsl_set_txidle() service ioctl to set transmit idle mode
2542 *
2543 * Arguments: info pointer to device instance data
2544 * idle_mode new idle mode
2545 *
2546 * Return Value: 0 if success, otherwise error code
2547 */
2548static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
2549{
2550 unsigned long flags;
2551
2552 if (debug_level >= DEBUG_LEVEL_INFO)
2553 printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
2554 info->device_name, idle_mode );
2555
2556 spin_lock_irqsave(&info->irq_spinlock,flags);
2557 info->idle_mode = idle_mode;
2558 usc_set_txidle( info );
2559 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2560 return 0;
2561
2562} /* end of mgsl_set_txidle() */
2563
2564/* mgsl_txenable()
2565 *
2566 * enable or disable the transmitter
2567 *
2568 * Arguments:
2569 *
2570 * info pointer to device instance data
2571 * enable 1 = enable, 0 = disable
2572 *
2573 * Return Value: 0 if success, otherwise error code
2574 */
2575static int mgsl_txenable(struct mgsl_struct * info, int enable)
2576{
2577 unsigned long flags;
2578
2579 if (debug_level >= DEBUG_LEVEL_INFO)
2580 printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
2581 info->device_name, enable);
2582
2583 spin_lock_irqsave(&info->irq_spinlock,flags);
2584 if ( enable ) {
2585 if ( !info->tx_enabled ) {
2586
2587 usc_start_transmitter(info);
2588 /*--------------------------------------------------
2589 * if HDLC/SDLC Loop mode, attempt to insert the
2590 * station in the 'loop' by setting CMR:13. Upon
2591 * receipt of the next GoAhead (RxAbort) sequence,
2592 * the OnLoop indicator (CCSR:7) should go active
2593 * to indicate that we are on the loop
2594 *--------------------------------------------------*/
2595 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2596 usc_loopmode_insert_request( info );
2597 }
2598 } else {
2599 if ( info->tx_enabled )
2600 usc_stop_transmitter(info);
2601 }
2602 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2603 return 0;
2604
2605} /* end of mgsl_txenable() */
2606
2607/* mgsl_txabort() abort send HDLC frame
2608 *
2609 * Arguments: info pointer to device instance data
2610 * Return Value: 0 if success, otherwise error code
2611 */
2612static int mgsl_txabort(struct mgsl_struct * info)
2613{
2614 unsigned long flags;
2615
2616 if (debug_level >= DEBUG_LEVEL_INFO)
2617 printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
2618 info->device_name);
2619
2620 spin_lock_irqsave(&info->irq_spinlock,flags);
2621 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
2622 {
2623 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
2624 usc_loopmode_cancel_transmit( info );
2625 else
2626 usc_TCmd(info,TCmd_SendAbort);
2627 }
2628 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2629 return 0;
2630
2631} /* end of mgsl_txabort() */
2632
2633/* mgsl_rxenable() enable or disable the receiver
2634 *
2635 * Arguments: info pointer to device instance data
2636 * enable 1 = enable, 0 = disable
2637 * Return Value: 0 if success, otherwise error code
2638 */
2639static int mgsl_rxenable(struct mgsl_struct * info, int enable)
2640{
2641 unsigned long flags;
2642
2643 if (debug_level >= DEBUG_LEVEL_INFO)
2644 printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
2645 info->device_name, enable);
2646
2647 spin_lock_irqsave(&info->irq_spinlock,flags);
2648 if ( enable ) {
2649 if ( !info->rx_enabled )
2650 usc_start_receiver(info);
2651 } else {
2652 if ( info->rx_enabled )
2653 usc_stop_receiver(info);
2654 }
2655 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2656 return 0;
2657
2658} /* end of mgsl_rxenable() */
2659
2660/* mgsl_wait_event() wait for specified event to occur
2661 *
2662 * Arguments: info pointer to device instance data
2663 * mask pointer to bitmask of events to wait for
2664 * Return Value: 0 if successful and bit mask updated with
2665 * of events triggerred,
2666 * otherwise error code
2667 */
2668static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
2669{
2670 unsigned long flags;
2671 int s;
2672 int rc=0;
2673 struct mgsl_icount cprev, cnow;
2674 int events;
2675 int mask;
2676 struct _input_signal_events oldsigs, newsigs;
2677 DECLARE_WAITQUEUE(wait, current);
2678
2679 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
2680 if (rc) {
2681 return -EFAULT;
2682 }
2683
2684 if (debug_level >= DEBUG_LEVEL_INFO)
2685 printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
2686 info->device_name, mask);
2687
2688 spin_lock_irqsave(&info->irq_spinlock,flags);
2689
2690 /* return immediately if state matches requested events */
2691 usc_get_serial_signals(info);
2692 s = info->serial_signals;
2693 events = mask &
2694 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2695 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2696 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2697 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2698 if (events) {
2699 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2700 goto exit;
2701 }
2702
2703 /* save current irq counts */
2704 cprev = info->icount;
2705 oldsigs = info->input_signal_events;
2706
2707 /* enable hunt and idle irqs if needed */
2708 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2709 u16 oldreg = usc_InReg(info,RICR);
2710 u16 newreg = oldreg +
2711 (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) +
2712 (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0);
2713 if (oldreg != newreg)
2714 usc_OutReg(info, RICR, newreg);
2715 }
2716
2717 set_current_state(TASK_INTERRUPTIBLE);
2718 add_wait_queue(&info->event_wait_q, &wait);
2719
2720 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2721
2722
2723 for(;;) {
2724 schedule();
2725 if (signal_pending(current)) {
2726 rc = -ERESTARTSYS;
2727 break;
2728 }
2729
2730 /* get current irq counts */
2731 spin_lock_irqsave(&info->irq_spinlock,flags);
2732 cnow = info->icount;
2733 newsigs = info->input_signal_events;
2734 set_current_state(TASK_INTERRUPTIBLE);
2735 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2736
2737 /* if no change, wait aborted for some reason */
2738 if (newsigs.dsr_up == oldsigs.dsr_up &&
2739 newsigs.dsr_down == oldsigs.dsr_down &&
2740 newsigs.dcd_up == oldsigs.dcd_up &&
2741 newsigs.dcd_down == oldsigs.dcd_down &&
2742 newsigs.cts_up == oldsigs.cts_up &&
2743 newsigs.cts_down == oldsigs.cts_down &&
2744 newsigs.ri_up == oldsigs.ri_up &&
2745 newsigs.ri_down == oldsigs.ri_down &&
2746 cnow.exithunt == cprev.exithunt &&
2747 cnow.rxidle == cprev.rxidle) {
2748 rc = -EIO;
2749 break;
2750 }
2751
2752 events = mask &
2753 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2754 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2755 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2756 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2757 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2758 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2759 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2760 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2761 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2762 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2763 if (events)
2764 break;
2765
2766 cprev = cnow;
2767 oldsigs = newsigs;
2768 }
2769
2770 remove_wait_queue(&info->event_wait_q, &wait);
2771 set_current_state(TASK_RUNNING);
2772
2773 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
2774 spin_lock_irqsave(&info->irq_spinlock,flags);
2775 if (!waitqueue_active(&info->event_wait_q)) {
2776 /* disable enable exit hunt mode/idle rcvd IRQs */
2777 usc_OutReg(info, RICR, usc_InReg(info,RICR) &
2778 ~(RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED));
2779 }
2780 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2781 }
2782exit:
2783 if ( rc == 0 )
2784 PUT_USER(rc, events, mask_ptr);
2785
2786 return rc;
2787
2788} /* end of mgsl_wait_event() */
2789
2790static int modem_input_wait(struct mgsl_struct *info,int arg)
2791{
2792 unsigned long flags;
2793 int rc;
2794 struct mgsl_icount cprev, cnow;
2795 DECLARE_WAITQUEUE(wait, current);
2796
2797 /* save current irq counts */
2798 spin_lock_irqsave(&info->irq_spinlock,flags);
2799 cprev = info->icount;
2800 add_wait_queue(&info->status_event_wait_q, &wait);
2801 set_current_state(TASK_INTERRUPTIBLE);
2802 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2803
2804 for(;;) {
2805 schedule();
2806 if (signal_pending(current)) {
2807 rc = -ERESTARTSYS;
2808 break;
2809 }
2810
2811 /* get new irq counts */
2812 spin_lock_irqsave(&info->irq_spinlock,flags);
2813 cnow = info->icount;
2814 set_current_state(TASK_INTERRUPTIBLE);
2815 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2816
2817 /* if no change, wait aborted for some reason */
2818 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2819 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2820 rc = -EIO;
2821 break;
2822 }
2823
2824 /* check for change in caller specified modem input */
2825 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2826 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2827 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
2828 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2829 rc = 0;
2830 break;
2831 }
2832
2833 cprev = cnow;
2834 }
2835 remove_wait_queue(&info->status_event_wait_q, &wait);
2836 set_current_state(TASK_RUNNING);
2837 return rc;
2838}
2839
2840/* return the state of the serial control and status signals
2841 */
2842static int tiocmget(struct tty_struct *tty, struct file *file)
2843{
2844 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2845 unsigned int result;
2846 unsigned long flags;
2847
2848 spin_lock_irqsave(&info->irq_spinlock,flags);
2849 usc_get_serial_signals(info);
2850 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2851
2852 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2853 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2854 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2855 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
2856 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2857 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2858
2859 if (debug_level >= DEBUG_LEVEL_INFO)
2860 printk("%s(%d):%s tiocmget() value=%08X\n",
2861 __FILE__,__LINE__, info->device_name, result );
2862 return result;
2863}
2864
2865/* set modem control signals (DTR/RTS)
2866 */
2867static int tiocmset(struct tty_struct *tty, struct file *file,
2868 unsigned int set, unsigned int clear)
2869{
2870 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
2871 unsigned long flags;
2872
2873 if (debug_level >= DEBUG_LEVEL_INFO)
2874 printk("%s(%d):%s tiocmset(%x,%x)\n",
2875 __FILE__,__LINE__,info->device_name, set, clear);
2876
2877 if (set & TIOCM_RTS)
2878 info->serial_signals |= SerialSignal_RTS;
2879 if (set & TIOCM_DTR)
2880 info->serial_signals |= SerialSignal_DTR;
2881 if (clear & TIOCM_RTS)
2882 info->serial_signals &= ~SerialSignal_RTS;
2883 if (clear & TIOCM_DTR)
2884 info->serial_signals &= ~SerialSignal_DTR;
2885
2886 spin_lock_irqsave(&info->irq_spinlock,flags);
2887 usc_set_serial_signals(info);
2888 spin_unlock_irqrestore(&info->irq_spinlock,flags);
2889
2890 return 0;
2891}
2892
2893/* mgsl_break() Set or clear transmit break condition
2894 *
2895 * Arguments: tty pointer to tty instance data
2896 * break_state -1=set break condition, 0=clear
Alan Cox9e989662008-07-22 11:18:03 +01002897 * Return Value: error code
Linus Torvalds1da177e2005-04-16 15:20:36 -07002898 */
Alan Cox9e989662008-07-22 11:18:03 +01002899static int mgsl_break(struct tty_struct *tty, int break_state)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002900{
2901 struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
2902 unsigned long flags;
2903
2904 if (debug_level >= DEBUG_LEVEL_INFO)
2905 printk("%s(%d):mgsl_break(%s,%d)\n",
2906 __FILE__,__LINE__, info->device_name, break_state);
2907
2908 if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
Alan Cox9e989662008-07-22 11:18:03 +01002909 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002910
2911 spin_lock_irqsave(&info->irq_spinlock,flags);
2912 if (break_state == -1)
2913 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
2914 else
2915 usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
2916 spin_unlock_irqrestore(&info->irq_spinlock,flags);
Alan Cox9e989662008-07-22 11:18:03 +01002917 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002918
2919} /* end of mgsl_break() */
2920
2921/* mgsl_ioctl() Service an IOCTL request
2922 *
2923 * Arguments:
2924 *
2925 * tty pointer to tty instance data
2926 * file pointer to associated file object for device
2927 * cmd IOCTL command code
2928 * arg command argument/context
2929 *
2930 * Return Value: 0 if success, otherwise error code
2931 */
2932static int mgsl_ioctl(struct tty_struct *tty, struct file * file,
2933 unsigned int cmd, unsigned long arg)
2934{
2935 struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
Alan Cox1f8cabb2008-04-30 00:53:24 -07002936 int ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002937
2938 if (debug_level >= DEBUG_LEVEL_INFO)
2939 printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
2940 info->device_name, cmd );
2941
2942 if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
2943 return -ENODEV;
2944
2945 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2946 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
2947 if (tty->flags & (1 << TTY_IO_ERROR))
2948 return -EIO;
2949 }
2950
Alan Cox1f8cabb2008-04-30 00:53:24 -07002951 lock_kernel();
2952 ret = mgsl_ioctl_common(info, cmd, arg);
2953 unlock_kernel();
2954 return ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002955}
2956
2957static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
2958{
2959 int error;
2960 struct mgsl_icount cnow; /* kernel counter temps */
2961 void __user *argp = (void __user *)arg;
2962 struct serial_icounter_struct __user *p_cuser; /* user space */
2963 unsigned long flags;
2964
2965 switch (cmd) {
2966 case MGSL_IOCGPARAMS:
2967 return mgsl_get_params(info, argp);
2968 case MGSL_IOCSPARAMS:
2969 return mgsl_set_params(info, argp);
2970 case MGSL_IOCGTXIDLE:
2971 return mgsl_get_txidle(info, argp);
2972 case MGSL_IOCSTXIDLE:
2973 return mgsl_set_txidle(info,(int)arg);
2974 case MGSL_IOCTXENABLE:
2975 return mgsl_txenable(info,(int)arg);
2976 case MGSL_IOCRXENABLE:
2977 return mgsl_rxenable(info,(int)arg);
2978 case MGSL_IOCTXABORT:
2979 return mgsl_txabort(info);
2980 case MGSL_IOCGSTATS:
2981 return mgsl_get_stats(info, argp);
2982 case MGSL_IOCWAITEVENT:
2983 return mgsl_wait_event(info, argp);
2984 case MGSL_IOCLOOPTXDONE:
2985 return mgsl_loopmode_send_done(info);
2986 /* Wait for modem input (DCD,RI,DSR,CTS) change
2987 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
2988 */
2989 case TIOCMIWAIT:
2990 return modem_input_wait(info,(int)arg);
2991
2992 /*
2993 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2994 * Return: write counters to the user passed counter struct
2995 * NB: both 1->0 and 0->1 transitions are counted except for
2996 * RI where only 0->1 is counted.
2997 */
2998 case TIOCGICOUNT:
2999 spin_lock_irqsave(&info->irq_spinlock,flags);
3000 cnow = info->icount;
3001 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3002 p_cuser = argp;
3003 PUT_USER(error,cnow.cts, &p_cuser->cts);
3004 if (error) return error;
3005 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
3006 if (error) return error;
3007 PUT_USER(error,cnow.rng, &p_cuser->rng);
3008 if (error) return error;
3009 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
3010 if (error) return error;
3011 PUT_USER(error,cnow.rx, &p_cuser->rx);
3012 if (error) return error;
3013 PUT_USER(error,cnow.tx, &p_cuser->tx);
3014 if (error) return error;
3015 PUT_USER(error,cnow.frame, &p_cuser->frame);
3016 if (error) return error;
3017 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
3018 if (error) return error;
3019 PUT_USER(error,cnow.parity, &p_cuser->parity);
3020 if (error) return error;
3021 PUT_USER(error,cnow.brk, &p_cuser->brk);
3022 if (error) return error;
3023 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
3024 if (error) return error;
3025 return 0;
3026 default:
3027 return -ENOIOCTLCMD;
3028 }
3029 return 0;
3030}
3031
3032/* mgsl_set_termios()
3033 *
3034 * Set new termios settings
3035 *
3036 * Arguments:
3037 *
3038 * tty pointer to tty structure
3039 * termios pointer to buffer to hold returned old termios
3040 *
3041 * Return Value: None
3042 */
Alan Cox606d0992006-12-08 02:38:45 -08003043static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003044{
3045 struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data;
3046 unsigned long flags;
3047
3048 if (debug_level >= DEBUG_LEVEL_INFO)
3049 printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
3050 tty->driver->name );
3051
Linus Torvalds1da177e2005-04-16 15:20:36 -07003052 mgsl_change_params(info);
3053
3054 /* Handle transition to B0 status */
3055 if (old_termios->c_cflag & CBAUD &&
3056 !(tty->termios->c_cflag & CBAUD)) {
3057 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
3058 spin_lock_irqsave(&info->irq_spinlock,flags);
3059 usc_set_serial_signals(info);
3060 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3061 }
3062
3063 /* Handle transition away from B0 status */
3064 if (!(old_termios->c_cflag & CBAUD) &&
3065 tty->termios->c_cflag & CBAUD) {
3066 info->serial_signals |= SerialSignal_DTR;
3067 if (!(tty->termios->c_cflag & CRTSCTS) ||
3068 !test_bit(TTY_THROTTLED, &tty->flags)) {
3069 info->serial_signals |= SerialSignal_RTS;
3070 }
3071 spin_lock_irqsave(&info->irq_spinlock,flags);
3072 usc_set_serial_signals(info);
3073 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3074 }
3075
3076 /* Handle turning off CRTSCTS */
3077 if (old_termios->c_cflag & CRTSCTS &&
3078 !(tty->termios->c_cflag & CRTSCTS)) {
3079 tty->hw_stopped = 0;
3080 mgsl_start(tty);
3081 }
3082
3083} /* end of mgsl_set_termios() */
3084
3085/* mgsl_close()
3086 *
3087 * Called when port is closed. Wait for remaining data to be
3088 * sent. Disable port and free resources.
3089 *
3090 * Arguments:
3091 *
3092 * tty pointer to open tty structure
3093 * filp pointer to open file object
3094 *
3095 * Return Value: None
3096 */
3097static void mgsl_close(struct tty_struct *tty, struct file * filp)
3098{
3099 struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
3100
3101 if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
3102 return;
3103
3104 if (debug_level >= DEBUG_LEVEL_INFO)
3105 printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
Alan Cox8fb06c72008-07-16 21:56:46 +01003106 __FILE__,__LINE__, info->device_name, info->port.count);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003107
Alan Cox8fb06c72008-07-16 21:56:46 +01003108 if (!info->port.count)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003109 return;
3110
3111 if (tty_hung_up_p(filp))
3112 goto cleanup;
3113
Alan Cox8fb06c72008-07-16 21:56:46 +01003114 if ((tty->count == 1) && (info->port.count != 1)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003115 /*
3116 * tty->count is 1 and the tty structure will be freed.
Alan Cox8fb06c72008-07-16 21:56:46 +01003117 * info->port.count should be one in this case.
Linus Torvalds1da177e2005-04-16 15:20:36 -07003118 * if it's not, correct it so that the port is shutdown.
3119 */
3120 printk("mgsl_close: bad refcount; tty->count is 1, "
Alan Cox8fb06c72008-07-16 21:56:46 +01003121 "info->port.count is %d\n", info->port.count);
3122 info->port.count = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003123 }
3124
Alan Cox8fb06c72008-07-16 21:56:46 +01003125 info->port.count--;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003126
3127 /* if at least one open remaining, leave hardware active */
Alan Cox8fb06c72008-07-16 21:56:46 +01003128 if (info->port.count)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003129 goto cleanup;
3130
Alan Cox8fb06c72008-07-16 21:56:46 +01003131 info->port.flags |= ASYNC_CLOSING;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003132
3133 /* set tty->closing to notify line discipline to
3134 * only process XON/XOFF characters. Only the N_TTY
3135 * discipline appears to use this (ppp does not).
3136 */
3137 tty->closing = 1;
3138
3139 /* wait for transmit data to clear all layers */
3140
Alan Cox44b7d1b2008-07-16 21:57:18 +01003141 if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003142 if (debug_level >= DEBUG_LEVEL_INFO)
3143 printk("%s(%d):mgsl_close(%s) calling tty_wait_until_sent\n",
3144 __FILE__,__LINE__, info->device_name );
Alan Cox44b7d1b2008-07-16 21:57:18 +01003145 tty_wait_until_sent(tty, info->port.closing_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003146 }
3147
Alan Cox8fb06c72008-07-16 21:56:46 +01003148 if (info->port.flags & ASYNC_INITIALIZED)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003149 mgsl_wait_until_sent(tty, info->timeout);
3150
Alan Cox978e5952008-04-30 00:53:59 -07003151 mgsl_flush_buffer(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003152
3153 tty_ldisc_flush(tty);
3154
3155 shutdown(info);
3156
3157 tty->closing = 0;
Alan Cox8fb06c72008-07-16 21:56:46 +01003158 info->port.tty = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003159
Alan Cox8fb06c72008-07-16 21:56:46 +01003160 if (info->port.blocked_open) {
Alan Cox44b7d1b2008-07-16 21:57:18 +01003161 if (info->port.close_delay) {
3162 msleep_interruptible(jiffies_to_msecs(info->port.close_delay));
Linus Torvalds1da177e2005-04-16 15:20:36 -07003163 }
Alan Cox8fb06c72008-07-16 21:56:46 +01003164 wake_up_interruptible(&info->port.open_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003165 }
3166
Alan Cox8fb06c72008-07-16 21:56:46 +01003167 info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003168
Alan Cox8fb06c72008-07-16 21:56:46 +01003169 wake_up_interruptible(&info->port.close_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003170
3171cleanup:
3172 if (debug_level >= DEBUG_LEVEL_INFO)
3173 printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
Alan Cox8fb06c72008-07-16 21:56:46 +01003174 tty->driver->name, info->port.count);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003175
3176} /* end of mgsl_close() */
3177
3178/* mgsl_wait_until_sent()
3179 *
3180 * Wait until the transmitter is empty.
3181 *
3182 * Arguments:
3183 *
3184 * tty pointer to tty info structure
3185 * timeout time to wait for send completion
3186 *
3187 * Return Value: None
3188 */
3189static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
3190{
3191 struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
3192 unsigned long orig_jiffies, char_time;
3193
3194 if (!info )
3195 return;
3196
3197 if (debug_level >= DEBUG_LEVEL_INFO)
3198 printk("%s(%d):mgsl_wait_until_sent(%s) entry\n",
3199 __FILE__,__LINE__, info->device_name );
3200
3201 if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent"))
3202 return;
3203
Alan Cox8fb06c72008-07-16 21:56:46 +01003204 if (!(info->port.flags & ASYNC_INITIALIZED))
Linus Torvalds1da177e2005-04-16 15:20:36 -07003205 goto exit;
3206
3207 orig_jiffies = jiffies;
3208
3209 /* Set check interval to 1/5 of estimated time to
3210 * send a character, and make it at least 1. The check
3211 * interval should also be less than the timeout.
3212 * Note: use tight timings here to satisfy the NIST-PCTS.
3213 */
Alan Cox978e5952008-04-30 00:53:59 -07003214
3215 lock_kernel();
Linus Torvalds1da177e2005-04-16 15:20:36 -07003216 if ( info->params.data_rate ) {
3217 char_time = info->timeout/(32 * 5);
3218 if (!char_time)
3219 char_time++;
3220 } else
3221 char_time = 1;
3222
3223 if (timeout)
3224 char_time = min_t(unsigned long, char_time, timeout);
3225
3226 if ( info->params.mode == MGSL_MODE_HDLC ||
3227 info->params.mode == MGSL_MODE_RAW ) {
3228 while (info->tx_active) {
3229 msleep_interruptible(jiffies_to_msecs(char_time));
3230 if (signal_pending(current))
3231 break;
3232 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3233 break;
3234 }
3235 } else {
3236 while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) &&
3237 info->tx_enabled) {
3238 msleep_interruptible(jiffies_to_msecs(char_time));
3239 if (signal_pending(current))
3240 break;
3241 if (timeout && time_after(jiffies, orig_jiffies + timeout))
3242 break;
3243 }
3244 }
Alan Cox978e5952008-04-30 00:53:59 -07003245 unlock_kernel();
Linus Torvalds1da177e2005-04-16 15:20:36 -07003246
3247exit:
3248 if (debug_level >= DEBUG_LEVEL_INFO)
3249 printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
3250 __FILE__,__LINE__, info->device_name );
3251
3252} /* end of mgsl_wait_until_sent() */
3253
3254/* mgsl_hangup()
3255 *
3256 * Called by tty_hangup() when a hangup is signaled.
3257 * This is the same as to closing all open files for the port.
3258 *
3259 * Arguments: tty pointer to associated tty object
3260 * Return Value: None
3261 */
3262static void mgsl_hangup(struct tty_struct *tty)
3263{
3264 struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data;
3265
3266 if (debug_level >= DEBUG_LEVEL_INFO)
3267 printk("%s(%d):mgsl_hangup(%s)\n",
3268 __FILE__,__LINE__, info->device_name );
3269
3270 if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
3271 return;
3272
3273 mgsl_flush_buffer(tty);
3274 shutdown(info);
3275
Alan Cox8fb06c72008-07-16 21:56:46 +01003276 info->port.count = 0;
3277 info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
3278 info->port.tty = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003279
Alan Cox8fb06c72008-07-16 21:56:46 +01003280 wake_up_interruptible(&info->port.open_wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003281
3282} /* end of mgsl_hangup() */
3283
3284/* block_til_ready()
3285 *
3286 * Block the current process until the specified port
3287 * is ready to be opened.
3288 *
3289 * Arguments:
3290 *
3291 * tty pointer to tty info structure
3292 * filp pointer to open file object
3293 * info pointer to device instance data
3294 *
3295 * Return Value: 0 if success, otherwise error code
3296 */
3297static int block_til_ready(struct tty_struct *tty, struct file * filp,
3298 struct mgsl_struct *info)
3299{
3300 DECLARE_WAITQUEUE(wait, current);
3301 int retval;
Joe Perches0fab6de2008-04-28 02:14:02 -07003302 bool do_clocal = false;
3303 bool extra_count = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003304 unsigned long flags;
3305
3306 if (debug_level >= DEBUG_LEVEL_INFO)
3307 printk("%s(%d):block_til_ready on %s\n",
3308 __FILE__,__LINE__, tty->driver->name );
3309
3310 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3311 /* nonblock mode is set or port is not enabled */
Alan Cox8fb06c72008-07-16 21:56:46 +01003312 info->port.flags |= ASYNC_NORMAL_ACTIVE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003313 return 0;
3314 }
3315
3316 if (tty->termios->c_cflag & CLOCAL)
Joe Perches0fab6de2008-04-28 02:14:02 -07003317 do_clocal = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003318
3319 /* Wait for carrier detect and the line to become
3320 * free (i.e., not in use by the callout). While we are in
Alan Cox8fb06c72008-07-16 21:56:46 +01003321 * this loop, info->port.count is dropped by one, so that
Linus Torvalds1da177e2005-04-16 15:20:36 -07003322 * mgsl_close() knows when to free things. We restore it upon
3323 * exit, either normal or abnormal.
3324 */
3325
3326 retval = 0;
Alan Cox8fb06c72008-07-16 21:56:46 +01003327 add_wait_queue(&info->port.open_wait, &wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003328
3329 if (debug_level >= DEBUG_LEVEL_INFO)
3330 printk("%s(%d):block_til_ready before block on %s count=%d\n",
Alan Cox8fb06c72008-07-16 21:56:46 +01003331 __FILE__,__LINE__, tty->driver->name, info->port.count );
Linus Torvalds1da177e2005-04-16 15:20:36 -07003332
3333 spin_lock_irqsave(&info->irq_spinlock, flags);
3334 if (!tty_hung_up_p(filp)) {
Joe Perches0fab6de2008-04-28 02:14:02 -07003335 extra_count = true;
Alan Cox8fb06c72008-07-16 21:56:46 +01003336 info->port.count--;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003337 }
3338 spin_unlock_irqrestore(&info->irq_spinlock, flags);
Alan Cox8fb06c72008-07-16 21:56:46 +01003339 info->port.blocked_open++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003340
3341 while (1) {
3342 if (tty->termios->c_cflag & CBAUD) {
3343 spin_lock_irqsave(&info->irq_spinlock,flags);
3344 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3345 usc_set_serial_signals(info);
3346 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3347 }
3348
3349 set_current_state(TASK_INTERRUPTIBLE);
3350
Alan Cox8fb06c72008-07-16 21:56:46 +01003351 if (tty_hung_up_p(filp) || !(info->port.flags & ASYNC_INITIALIZED)){
3352 retval = (info->port.flags & ASYNC_HUP_NOTIFY) ?
Linus Torvalds1da177e2005-04-16 15:20:36 -07003353 -EAGAIN : -ERESTARTSYS;
3354 break;
3355 }
3356
3357 spin_lock_irqsave(&info->irq_spinlock,flags);
3358 usc_get_serial_signals(info);
3359 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3360
Alan Cox8fb06c72008-07-16 21:56:46 +01003361 if (!(info->port.flags & ASYNC_CLOSING) &&
Linus Torvalds1da177e2005-04-16 15:20:36 -07003362 (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
3363 break;
3364 }
3365
3366 if (signal_pending(current)) {
3367 retval = -ERESTARTSYS;
3368 break;
3369 }
3370
3371 if (debug_level >= DEBUG_LEVEL_INFO)
3372 printk("%s(%d):block_til_ready blocking on %s count=%d\n",
Alan Cox8fb06c72008-07-16 21:56:46 +01003373 __FILE__,__LINE__, tty->driver->name, info->port.count );
Linus Torvalds1da177e2005-04-16 15:20:36 -07003374
3375 schedule();
3376 }
3377
3378 set_current_state(TASK_RUNNING);
Alan Cox8fb06c72008-07-16 21:56:46 +01003379 remove_wait_queue(&info->port.open_wait, &wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003380
3381 if (extra_count)
Alan Cox8fb06c72008-07-16 21:56:46 +01003382 info->port.count++;
3383 info->port.blocked_open--;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003384
3385 if (debug_level >= DEBUG_LEVEL_INFO)
3386 printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
Alan Cox8fb06c72008-07-16 21:56:46 +01003387 __FILE__,__LINE__, tty->driver->name, info->port.count );
Linus Torvalds1da177e2005-04-16 15:20:36 -07003388
3389 if (!retval)
Alan Cox8fb06c72008-07-16 21:56:46 +01003390 info->port.flags |= ASYNC_NORMAL_ACTIVE;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003391
3392 return retval;
3393
3394} /* end of block_til_ready() */
3395
3396/* mgsl_open()
3397 *
3398 * Called when a port is opened. Init and enable port.
3399 * Perform serial-specific initialization for the tty structure.
3400 *
3401 * Arguments: tty pointer to tty info structure
3402 * filp associated file pointer
3403 *
3404 * Return Value: 0 if success, otherwise error code
3405 */
3406static int mgsl_open(struct tty_struct *tty, struct file * filp)
3407{
3408 struct mgsl_struct *info;
3409 int retval, line;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003410 unsigned long flags;
3411
3412 /* verify range of specified line number */
3413 line = tty->index;
3414 if ((line < 0) || (line >= mgsl_device_count)) {
3415 printk("%s(%d):mgsl_open with invalid line #%d.\n",
3416 __FILE__,__LINE__,line);
3417 return -ENODEV;
3418 }
3419
3420 /* find the info structure for the specified line */
3421 info = mgsl_device_list;
3422 while(info && info->line != line)
3423 info = info->next_device;
3424 if (mgsl_paranoia_check(info, tty->name, "mgsl_open"))
3425 return -ENODEV;
3426
3427 tty->driver_data = info;
Alan Cox8fb06c72008-07-16 21:56:46 +01003428 info->port.tty = tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003429
3430 if (debug_level >= DEBUG_LEVEL_INFO)
3431 printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
Alan Cox8fb06c72008-07-16 21:56:46 +01003432 __FILE__,__LINE__,tty->driver->name, info->port.count);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003433
3434 /* If port is closing, signal caller to try again */
Alan Cox8fb06c72008-07-16 21:56:46 +01003435 if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
3436 if (info->port.flags & ASYNC_CLOSING)
3437 interruptible_sleep_on(&info->port.close_wait);
3438 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
Linus Torvalds1da177e2005-04-16 15:20:36 -07003439 -EAGAIN : -ERESTARTSYS);
3440 goto cleanup;
3441 }
3442
Alan Cox8fb06c72008-07-16 21:56:46 +01003443 info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003444
3445 spin_lock_irqsave(&info->netlock, flags);
3446 if (info->netcount) {
3447 retval = -EBUSY;
3448 spin_unlock_irqrestore(&info->netlock, flags);
3449 goto cleanup;
3450 }
Alan Cox8fb06c72008-07-16 21:56:46 +01003451 info->port.count++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003452 spin_unlock_irqrestore(&info->netlock, flags);
3453
Alan Cox8fb06c72008-07-16 21:56:46 +01003454 if (info->port.count == 1) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003455 /* 1st open on this device, init hardware */
3456 retval = startup(info);
3457 if (retval < 0)
3458 goto cleanup;
3459 }
3460
3461 retval = block_til_ready(tty, filp, info);
3462 if (retval) {
3463 if (debug_level >= DEBUG_LEVEL_INFO)
3464 printk("%s(%d):block_til_ready(%s) returned %d\n",
3465 __FILE__,__LINE__, info->device_name, retval);
3466 goto cleanup;
3467 }
3468
3469 if (debug_level >= DEBUG_LEVEL_INFO)
3470 printk("%s(%d):mgsl_open(%s) success\n",
3471 __FILE__,__LINE__, info->device_name);
3472 retval = 0;
3473
3474cleanup:
3475 if (retval) {
3476 if (tty->count == 1)
Alan Cox8fb06c72008-07-16 21:56:46 +01003477 info->port.tty = NULL; /* tty layer will release tty struct */
3478 if(info->port.count)
3479 info->port.count--;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003480 }
3481
3482 return retval;
3483
3484} /* end of mgsl_open() */
3485
3486/*
3487 * /proc fs routines....
3488 */
3489
3490static inline int line_info(char *buf, struct mgsl_struct *info)
3491{
3492 char stat_buf[30];
3493 int ret;
3494 unsigned long flags;
3495
3496 if (info->bus_type == MGSL_BUS_TYPE_PCI) {
3497 ret = sprintf(buf, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
3498 info->device_name, info->io_base, info->irq_level,
3499 info->phys_memory_base, info->phys_lcr_base);
3500 } else {
3501 ret = sprintf(buf, "%s:(E)ISA io:%04X irq:%d dma:%d",
3502 info->device_name, info->io_base,
3503 info->irq_level, info->dma_level);
3504 }
3505
3506 /* output current serial signal states */
3507 spin_lock_irqsave(&info->irq_spinlock,flags);
3508 usc_get_serial_signals(info);
3509 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3510
3511 stat_buf[0] = 0;
3512 stat_buf[1] = 0;
3513 if (info->serial_signals & SerialSignal_RTS)
3514 strcat(stat_buf, "|RTS");
3515 if (info->serial_signals & SerialSignal_CTS)
3516 strcat(stat_buf, "|CTS");
3517 if (info->serial_signals & SerialSignal_DTR)
3518 strcat(stat_buf, "|DTR");
3519 if (info->serial_signals & SerialSignal_DSR)
3520 strcat(stat_buf, "|DSR");
3521 if (info->serial_signals & SerialSignal_DCD)
3522 strcat(stat_buf, "|CD");
3523 if (info->serial_signals & SerialSignal_RI)
3524 strcat(stat_buf, "|RI");
3525
3526 if (info->params.mode == MGSL_MODE_HDLC ||
3527 info->params.mode == MGSL_MODE_RAW ) {
3528 ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d",
3529 info->icount.txok, info->icount.rxok);
3530 if (info->icount.txunder)
3531 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
3532 if (info->icount.txabort)
3533 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
3534 if (info->icount.rxshort)
3535 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
3536 if (info->icount.rxlong)
3537 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
3538 if (info->icount.rxover)
3539 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
3540 if (info->icount.rxcrc)
3541 ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
3542 } else {
3543 ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d",
3544 info->icount.tx, info->icount.rx);
3545 if (info->icount.frame)
3546 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
3547 if (info->icount.parity)
3548 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
3549 if (info->icount.brk)
3550 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
3551 if (info->icount.overrun)
3552 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
3553 }
3554
3555 /* Append serial signal status to end */
3556 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
3557
3558 ret += sprintf(buf+ret, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
3559 info->tx_active,info->bh_requested,info->bh_running,
3560 info->pending_bh);
3561
3562 spin_lock_irqsave(&info->irq_spinlock,flags);
3563 {
3564 u16 Tcsr = usc_InReg( info, TCSR );
3565 u16 Tdmr = usc_InDmaReg( info, TDMR );
3566 u16 Ticr = usc_InReg( info, TICR );
3567 u16 Rscr = usc_InReg( info, RCSR );
3568 u16 Rdmr = usc_InDmaReg( info, RDMR );
3569 u16 Ricr = usc_InReg( info, RICR );
3570 u16 Icr = usc_InReg( info, ICR );
3571 u16 Dccr = usc_InReg( info, DCCR );
3572 u16 Tmr = usc_InReg( info, TMR );
3573 u16 Tccr = usc_InReg( info, TCCR );
3574 u16 Ccar = inw( info->io_base + CCAR );
3575 ret += sprintf(buf+ret, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
3576 "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n",
3577 Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar );
3578 }
3579 spin_unlock_irqrestore(&info->irq_spinlock,flags);
3580
3581 return ret;
3582
3583} /* end of line_info() */
3584
3585/* mgsl_read_proc()
3586 *
3587 * Called to print information about devices
3588 *
3589 * Arguments:
3590 * page page of memory to hold returned info
3591 * start
3592 * off
3593 * count
3594 * eof
3595 * data
3596 *
3597 * Return Value:
3598 */
3599static int mgsl_read_proc(char *page, char **start, off_t off, int count,
3600 int *eof, void *data)
3601{
3602 int len = 0, l;
3603 off_t begin = 0;
3604 struct mgsl_struct *info;
3605
3606 len += sprintf(page, "synclink driver:%s\n", driver_version);
3607
3608 info = mgsl_device_list;
3609 while( info ) {
3610 l = line_info(page + len, info);
3611 len += l;
3612 if (len+begin > off+count)
3613 goto done;
3614 if (len+begin < off) {
3615 begin += len;
3616 len = 0;
3617 }
3618 info = info->next_device;
3619 }
3620
3621 *eof = 1;
3622done:
3623 if (off >= len+begin)
3624 return 0;
3625 *start = page + (off-begin);
3626 return ((count < begin+len-off) ? count : begin+len-off);
3627
3628} /* end of mgsl_read_proc() */
3629
3630/* mgsl_allocate_dma_buffers()
3631 *
3632 * Allocate and format DMA buffers (ISA adapter)
3633 * or format shared memory buffers (PCI adapter).
3634 *
3635 * Arguments: info pointer to device instance data
3636 * Return Value: 0 if success, otherwise error
3637 */
3638static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
3639{
3640 unsigned short BuffersPerFrame;
3641
3642 info->last_mem_alloc = 0;
3643
3644 /* Calculate the number of DMA buffers necessary to hold the */
3645 /* largest allowable frame size. Note: If the max frame size is */
3646 /* not an even multiple of the DMA buffer size then we need to */
3647 /* round the buffer count per frame up one. */
3648
3649 BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE);
3650 if ( info->max_frame_size % DMABUFFERSIZE )
3651 BuffersPerFrame++;
3652
3653 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3654 /*
3655 * The PCI adapter has 256KBytes of shared memory to use.
3656 * This is 64 PAGE_SIZE buffers.
3657 *
3658 * The first page is used for padding at this time so the
3659 * buffer list does not begin at offset 0 of the PCI
3660 * adapter's shared memory.
3661 *
3662 * The 2nd page is used for the buffer list. A 4K buffer
3663 * list can hold 128 DMA_BUFFER structures at 32 bytes
3664 * each.
3665 *
3666 * This leaves 62 4K pages.
3667 *
3668 * The next N pages are used for transmit frame(s). We
3669 * reserve enough 4K page blocks to hold the required
3670 * number of transmit dma buffers (num_tx_dma_buffers),
3671 * each of MaxFrameSize size.
3672 *
3673 * Of the remaining pages (62-N), determine how many can
3674 * be used to receive full MaxFrameSize inbound frames
3675 */
3676 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3677 info->rx_buffer_count = 62 - info->tx_buffer_count;
3678 } else {
3679 /* Calculate the number of PAGE_SIZE buffers needed for */
3680 /* receive and transmit DMA buffers. */
3681
3682
3683 /* Calculate the number of DMA buffers necessary to */
3684 /* hold 7 max size receive frames and one max size transmit frame. */
3685 /* The receive buffer count is bumped by one so we avoid an */
3686 /* End of List condition if all receive buffers are used when */
3687 /* using linked list DMA buffers. */
3688
3689 info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
3690 info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6;
3691
3692 /*
3693 * limit total TxBuffers & RxBuffers to 62 4K total
3694 * (ala PCI Allocation)
3695 */
3696
3697 if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 )
3698 info->rx_buffer_count = 62 - info->tx_buffer_count;
3699
3700 }
3701
3702 if ( debug_level >= DEBUG_LEVEL_INFO )
3703 printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
3704 __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
3705
3706 if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
3707 mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
3708 mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
3709 mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 ||
3710 mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
3711 printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
3712 return -ENOMEM;
3713 }
3714
3715 mgsl_reset_rx_dma_buffers( info );
3716 mgsl_reset_tx_dma_buffers( info );
3717
3718 return 0;
3719
3720} /* end of mgsl_allocate_dma_buffers() */
3721
3722/*
3723 * mgsl_alloc_buffer_list_memory()
3724 *
3725 * Allocate a common DMA buffer for use as the
3726 * receive and transmit buffer lists.
3727 *
3728 * A buffer list is a set of buffer entries where each entry contains
3729 * a pointer to an actual buffer and a pointer to the next buffer entry
3730 * (plus some other info about the buffer).
3731 *
3732 * The buffer entries for a list are built to form a circular list so
3733 * that when the entire list has been traversed you start back at the
3734 * beginning.
3735 *
3736 * This function allocates memory for just the buffer entries.
3737 * The links (pointer to next entry) are filled in with the physical
3738 * address of the next entry so the adapter can navigate the list
3739 * using bus master DMA. The pointers to the actual buffers are filled
3740 * out later when the actual buffers are allocated.
3741 *
3742 * Arguments: info pointer to device instance data
3743 * Return Value: 0 if success, otherwise error
3744 */
3745static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
3746{
3747 unsigned int i;
3748
3749 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3750 /* PCI adapter uses shared memory. */
3751 info->buffer_list = info->memory_base + info->last_mem_alloc;
3752 info->buffer_list_phys = info->last_mem_alloc;
3753 info->last_mem_alloc += BUFFERLISTSIZE;
3754 } else {
3755 /* ISA adapter uses system memory. */
3756 /* The buffer lists are allocated as a common buffer that both */
3757 /* the processor and adapter can access. This allows the driver to */
3758 /* inspect portions of the buffer while other portions are being */
3759 /* updated by the adapter using Bus Master DMA. */
3760
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003761 info->buffer_list = dma_alloc_coherent(NULL, BUFFERLISTSIZE, &info->buffer_list_dma_addr, GFP_KERNEL);
3762 if (info->buffer_list == NULL)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003763 return -ENOMEM;
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003764 info->buffer_list_phys = (u32)(info->buffer_list_dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003765 }
3766
3767 /* We got the memory for the buffer entry lists. */
3768 /* Initialize the memory block to all zeros. */
3769 memset( info->buffer_list, 0, BUFFERLISTSIZE );
3770
3771 /* Save virtual address pointers to the receive and */
3772 /* transmit buffer lists. (Receive 1st). These pointers will */
3773 /* be used by the processor to access the lists. */
3774 info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3775 info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list;
3776 info->tx_buffer_list += info->rx_buffer_count;
3777
3778 /*
3779 * Build the links for the buffer entry lists such that
3780 * two circular lists are built. (Transmit and Receive).
3781 *
3782 * Note: the links are physical addresses
3783 * which are read by the adapter to determine the next
3784 * buffer entry to use.
3785 */
3786
3787 for ( i = 0; i < info->rx_buffer_count; i++ ) {
3788 /* calculate and store physical address of this buffer entry */
3789 info->rx_buffer_list[i].phys_entry =
3790 info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY));
3791
3792 /* calculate and store physical address of */
3793 /* next entry in cirular list of entries */
3794
3795 info->rx_buffer_list[i].link = info->buffer_list_phys;
3796
3797 if ( i < info->rx_buffer_count - 1 )
3798 info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3799 }
3800
3801 for ( i = 0; i < info->tx_buffer_count; i++ ) {
3802 /* calculate and store physical address of this buffer entry */
3803 info->tx_buffer_list[i].phys_entry = info->buffer_list_phys +
3804 ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY));
3805
3806 /* calculate and store physical address of */
3807 /* next entry in cirular list of entries */
3808
3809 info->tx_buffer_list[i].link = info->buffer_list_phys +
3810 info->rx_buffer_count * sizeof(DMABUFFERENTRY);
3811
3812 if ( i < info->tx_buffer_count - 1 )
3813 info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY);
3814 }
3815
3816 return 0;
3817
3818} /* end of mgsl_alloc_buffer_list_memory() */
3819
3820/* Free DMA buffers allocated for use as the
3821 * receive and transmit buffer lists.
3822 * Warning:
3823 *
3824 * The data transfer buffers associated with the buffer list
3825 * MUST be freed before freeing the buffer list itself because
3826 * the buffer list contains the information necessary to free
3827 * the individual buffers!
3828 */
3829static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
3830{
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003831 if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
3832 dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003833
3834 info->buffer_list = NULL;
3835 info->rx_buffer_list = NULL;
3836 info->tx_buffer_list = NULL;
3837
3838} /* end of mgsl_free_buffer_list_memory() */
3839
3840/*
3841 * mgsl_alloc_frame_memory()
3842 *
3843 * Allocate the frame DMA buffers used by the specified buffer list.
3844 * Each DMA buffer will be one memory page in size. This is necessary
3845 * because memory can fragment enough that it may be impossible
3846 * contiguous pages.
3847 *
3848 * Arguments:
3849 *
3850 * info pointer to device instance data
3851 * BufferList pointer to list of buffer entries
3852 * Buffercount count of buffer entries in buffer list
3853 *
3854 * Return Value: 0 if success, otherwise -ENOMEM
3855 */
3856static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
3857{
3858 int i;
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003859 u32 phys_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003860
3861 /* Allocate page sized buffers for the receive buffer list */
3862
3863 for ( i = 0; i < Buffercount; i++ ) {
3864 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
3865 /* PCI adapter uses shared memory buffers. */
3866 BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc;
3867 phys_addr = info->last_mem_alloc;
3868 info->last_mem_alloc += DMABUFFERSIZE;
3869 } else {
3870 /* ISA adapter uses system memory. */
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003871 BufferList[i].virt_addr = dma_alloc_coherent(NULL, DMABUFFERSIZE, &BufferList[i].dma_addr, GFP_KERNEL);
3872 if (BufferList[i].virt_addr == NULL)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003873 return -ENOMEM;
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003874 phys_addr = (u32)(BufferList[i].dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003875 }
3876 BufferList[i].phys_addr = phys_addr;
3877 }
3878
3879 return 0;
3880
3881} /* end of mgsl_alloc_frame_memory() */
3882
3883/*
3884 * mgsl_free_frame_memory()
3885 *
3886 * Free the buffers associated with
3887 * each buffer entry of a buffer list.
3888 *
3889 * Arguments:
3890 *
3891 * info pointer to device instance data
3892 * BufferList pointer to list of buffer entries
3893 * Buffercount count of buffer entries in buffer list
3894 *
3895 * Return Value: None
3896 */
3897static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
3898{
3899 int i;
3900
3901 if ( BufferList ) {
3902 for ( i = 0 ; i < Buffercount ; i++ ) {
3903 if ( BufferList[i].virt_addr ) {
3904 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
Paul Fulghum0ff1b2c2005-11-13 16:07:19 -08003905 dma_free_coherent(NULL, DMABUFFERSIZE, BufferList[i].virt_addr, BufferList[i].dma_addr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003906 BufferList[i].virt_addr = NULL;
3907 }
3908 }
3909 }
3910
3911} /* end of mgsl_free_frame_memory() */
3912
3913/* mgsl_free_dma_buffers()
3914 *
3915 * Free DMA buffers
3916 *
3917 * Arguments: info pointer to device instance data
3918 * Return Value: None
3919 */
3920static void mgsl_free_dma_buffers( struct mgsl_struct *info )
3921{
3922 mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count );
3923 mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count );
3924 mgsl_free_buffer_list_memory( info );
3925
3926} /* end of mgsl_free_dma_buffers() */
3927
3928
3929/*
3930 * mgsl_alloc_intermediate_rxbuffer_memory()
3931 *
3932 * Allocate a buffer large enough to hold max_frame_size. This buffer
3933 * is used to pass an assembled frame to the line discipline.
3934 *
3935 * Arguments:
3936 *
3937 * info pointer to device instance data
3938 *
3939 * Return Value: 0 if success, otherwise -ENOMEM
3940 */
3941static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3942{
3943 info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA);
3944 if ( info->intermediate_rxbuffer == NULL )
3945 return -ENOMEM;
3946
3947 return 0;
3948
3949} /* end of mgsl_alloc_intermediate_rxbuffer_memory() */
3950
3951/*
3952 * mgsl_free_intermediate_rxbuffer_memory()
3953 *
3954 *
3955 * Arguments:
3956 *
3957 * info pointer to device instance data
3958 *
3959 * Return Value: None
3960 */
3961static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
3962{
Jesper Juhl735d5662005-11-07 01:01:29 -08003963 kfree(info->intermediate_rxbuffer);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003964 info->intermediate_rxbuffer = NULL;
3965
3966} /* end of mgsl_free_intermediate_rxbuffer_memory() */
3967
3968/*
3969 * mgsl_alloc_intermediate_txbuffer_memory()
3970 *
3971 * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size.
3972 * This buffer is used to load transmit frames into the adapter's dma transfer
3973 * buffers when there is sufficient space.
3974 *
3975 * Arguments:
3976 *
3977 * info pointer to device instance data
3978 *
3979 * Return Value: 0 if success, otherwise -ENOMEM
3980 */
3981static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info)
3982{
3983 int i;
3984
3985 if ( debug_level >= DEBUG_LEVEL_INFO )
3986 printk("%s %s(%d) allocating %d tx holding buffers\n",
3987 info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers);
3988
3989 memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers));
3990
3991 for ( i=0; i<info->num_tx_holding_buffers; ++i) {
3992 info->tx_holding_buffers[i].buffer =
3993 kmalloc(info->max_frame_size, GFP_KERNEL);
Amit Choudharyd9a2f4a2007-05-08 00:26:13 -07003994 if (info->tx_holding_buffers[i].buffer == NULL) {
3995 for (--i; i >= 0; i--) {
3996 kfree(info->tx_holding_buffers[i].buffer);
3997 info->tx_holding_buffers[i].buffer = NULL;
3998 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07003999 return -ENOMEM;
Amit Choudharyd9a2f4a2007-05-08 00:26:13 -07004000 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07004001 }
4002
4003 return 0;
4004
4005} /* end of mgsl_alloc_intermediate_txbuffer_memory() */
4006
4007/*
4008 * mgsl_free_intermediate_txbuffer_memory()
4009 *
4010 *
4011 * Arguments:
4012 *
4013 * info pointer to device instance data
4014 *
4015 * Return Value: None
4016 */
4017static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info)
4018{
4019 int i;
4020
4021 for ( i=0; i<info->num_tx_holding_buffers; ++i ) {
Jesper Juhl735d5662005-11-07 01:01:29 -08004022 kfree(info->tx_holding_buffers[i].buffer);
4023 info->tx_holding_buffers[i].buffer = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004024 }
4025
4026 info->get_tx_holding_index = 0;
4027 info->put_tx_holding_index = 0;
4028 info->tx_holding_count = 0;
4029
4030} /* end of mgsl_free_intermediate_txbuffer_memory() */
4031
4032
4033/*
4034 * load_next_tx_holding_buffer()
4035 *
4036 * attempts to load the next buffered tx request into the
4037 * tx dma buffers
4038 *
4039 * Arguments:
4040 *
4041 * info pointer to device instance data
4042 *
Joe Perches0fab6de2008-04-28 02:14:02 -07004043 * Return Value: true if next buffered tx request loaded
Linus Torvalds1da177e2005-04-16 15:20:36 -07004044 * into adapter's tx dma buffer,
Joe Perches0fab6de2008-04-28 02:14:02 -07004045 * false otherwise
Linus Torvalds1da177e2005-04-16 15:20:36 -07004046 */
Joe Perches0fab6de2008-04-28 02:14:02 -07004047static bool load_next_tx_holding_buffer(struct mgsl_struct *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -07004048{
Joe Perches0fab6de2008-04-28 02:14:02 -07004049 bool ret = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004050
4051 if ( info->tx_holding_count ) {
4052 /* determine if we have enough tx dma buffers
4053 * to accommodate the next tx frame
4054 */
4055 struct tx_holding_buffer *ptx =
4056 &info->tx_holding_buffers[info->get_tx_holding_index];
4057 int num_free = num_free_tx_dma_buffers(info);
4058 int num_needed = ptx->buffer_size / DMABUFFERSIZE;
4059 if ( ptx->buffer_size % DMABUFFERSIZE )
4060 ++num_needed;
4061
4062 if (num_needed <= num_free) {
4063 info->xmit_cnt = ptx->buffer_size;
4064 mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size);
4065
4066 --info->tx_holding_count;
4067 if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers)
4068 info->get_tx_holding_index=0;
4069
4070 /* restart transmit timer */
4071 mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000));
4072
Joe Perches0fab6de2008-04-28 02:14:02 -07004073 ret = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004074 }
4075 }
4076
4077 return ret;
4078}
4079
4080/*
4081 * save_tx_buffer_request()
4082 *
4083 * attempt to store transmit frame request for later transmission
4084 *
4085 * Arguments:
4086 *
4087 * info pointer to device instance data
4088 * Buffer pointer to buffer containing frame to load
4089 * BufferSize size in bytes of frame in Buffer
4090 *
4091 * Return Value: 1 if able to store, 0 otherwise
4092 */
4093static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize)
4094{
4095 struct tx_holding_buffer *ptx;
4096
4097 if ( info->tx_holding_count >= info->num_tx_holding_buffers ) {
4098 return 0; /* all buffers in use */
4099 }
4100
4101 ptx = &info->tx_holding_buffers[info->put_tx_holding_index];
4102 ptx->buffer_size = BufferSize;
4103 memcpy( ptx->buffer, Buffer, BufferSize);
4104
4105 ++info->tx_holding_count;
4106 if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers)
4107 info->put_tx_holding_index=0;
4108
4109 return 1;
4110}
4111
4112static int mgsl_claim_resources(struct mgsl_struct *info)
4113{
4114 if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) {
4115 printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n",
4116 __FILE__,__LINE__,info->device_name, info->io_base);
4117 return -ENODEV;
4118 }
Joe Perches0fab6de2008-04-28 02:14:02 -07004119 info->io_addr_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004120
4121 if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
4122 info->device_name, info ) < 0 ) {
4123 printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n",
4124 __FILE__,__LINE__,info->device_name, info->irq_level );
4125 goto errout;
4126 }
Joe Perches0fab6de2008-04-28 02:14:02 -07004127 info->irq_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004128
4129 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4130 if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
4131 printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
4132 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
4133 goto errout;
4134 }
Joe Perches0fab6de2008-04-28 02:14:02 -07004135 info->shared_mem_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004136 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) {
4137 printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n",
4138 __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset);
4139 goto errout;
4140 }
Joe Perches0fab6de2008-04-28 02:14:02 -07004141 info->lcr_mem_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004142
Alan Cox24cb2332008-04-30 00:54:19 -07004143 info->memory_base = ioremap_nocache(info->phys_memory_base,
4144 0x40000);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004145 if (!info->memory_base) {
4146 printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n",
4147 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4148 goto errout;
4149 }
4150
4151 if ( !mgsl_memory_test(info) ) {
4152 printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
4153 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
4154 goto errout;
4155 }
4156
Alan Cox24cb2332008-04-30 00:54:19 -07004157 info->lcr_base = ioremap_nocache(info->phys_lcr_base,
4158 PAGE_SIZE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004159 if (!info->lcr_base) {
4160 printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n",
4161 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
4162 goto errout;
4163 }
Alan Cox24cb2332008-04-30 00:54:19 -07004164 info->lcr_base += info->lcr_offset;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004165
4166 } else {
4167 /* claim DMA channel */
4168
4169 if (request_dma(info->dma_level,info->device_name) < 0){
4170 printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n",
4171 __FILE__,__LINE__,info->device_name, info->dma_level );
4172 mgsl_release_resources( info );
4173 return -ENODEV;
4174 }
Joe Perches0fab6de2008-04-28 02:14:02 -07004175 info->dma_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004176
4177 /* ISA adapter uses bus master DMA */
4178 set_dma_mode(info->dma_level,DMA_MODE_CASCADE);
4179 enable_dma(info->dma_level);
4180 }
4181
4182 if ( mgsl_allocate_dma_buffers(info) < 0 ) {
4183 printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n",
4184 __FILE__,__LINE__,info->device_name, info->dma_level );
4185 goto errout;
4186 }
4187
4188 return 0;
4189errout:
4190 mgsl_release_resources(info);
4191 return -ENODEV;
4192
4193} /* end of mgsl_claim_resources() */
4194
4195static void mgsl_release_resources(struct mgsl_struct *info)
4196{
4197 if ( debug_level >= DEBUG_LEVEL_INFO )
4198 printk( "%s(%d):mgsl_release_resources(%s) entry\n",
4199 __FILE__,__LINE__,info->device_name );
4200
4201 if ( info->irq_requested ) {
4202 free_irq(info->irq_level, info);
Joe Perches0fab6de2008-04-28 02:14:02 -07004203 info->irq_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004204 }
4205 if ( info->dma_requested ) {
4206 disable_dma(info->dma_level);
4207 free_dma(info->dma_level);
Joe Perches0fab6de2008-04-28 02:14:02 -07004208 info->dma_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004209 }
4210 mgsl_free_dma_buffers(info);
4211 mgsl_free_intermediate_rxbuffer_memory(info);
4212 mgsl_free_intermediate_txbuffer_memory(info);
4213
4214 if ( info->io_addr_requested ) {
4215 release_region(info->io_base,info->io_addr_size);
Joe Perches0fab6de2008-04-28 02:14:02 -07004216 info->io_addr_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004217 }
4218 if ( info->shared_mem_requested ) {
4219 release_mem_region(info->phys_memory_base,0x40000);
Joe Perches0fab6de2008-04-28 02:14:02 -07004220 info->shared_mem_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004221 }
4222 if ( info->lcr_mem_requested ) {
4223 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
Joe Perches0fab6de2008-04-28 02:14:02 -07004224 info->lcr_mem_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004225 }
4226 if (info->memory_base){
4227 iounmap(info->memory_base);
4228 info->memory_base = NULL;
4229 }
4230 if (info->lcr_base){
4231 iounmap(info->lcr_base - info->lcr_offset);
4232 info->lcr_base = NULL;
4233 }
4234
4235 if ( debug_level >= DEBUG_LEVEL_INFO )
4236 printk( "%s(%d):mgsl_release_resources(%s) exit\n",
4237 __FILE__,__LINE__,info->device_name );
4238
4239} /* end of mgsl_release_resources() */
4240
4241/* mgsl_add_device()
4242 *
4243 * Add the specified device instance data structure to the
4244 * global linked list of devices and increment the device count.
4245 *
4246 * Arguments: info pointer to device instance data
4247 * Return Value: None
4248 */
4249static void mgsl_add_device( struct mgsl_struct *info )
4250{
4251 info->next_device = NULL;
4252 info->line = mgsl_device_count;
4253 sprintf(info->device_name,"ttySL%d",info->line);
4254
4255 if (info->line < MAX_TOTAL_DEVICES) {
4256 if (maxframe[info->line])
4257 info->max_frame_size = maxframe[info->line];
Linus Torvalds1da177e2005-04-16 15:20:36 -07004258
4259 if (txdmabufs[info->line]) {
4260 info->num_tx_dma_buffers = txdmabufs[info->line];
4261 if (info->num_tx_dma_buffers < 1)
4262 info->num_tx_dma_buffers = 1;
4263 }
4264
4265 if (txholdbufs[info->line]) {
4266 info->num_tx_holding_buffers = txholdbufs[info->line];
4267 if (info->num_tx_holding_buffers < 1)
4268 info->num_tx_holding_buffers = 1;
4269 else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS)
4270 info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS;
4271 }
4272 }
4273
4274 mgsl_device_count++;
4275
4276 if ( !mgsl_device_list )
4277 mgsl_device_list = info;
4278 else {
4279 struct mgsl_struct *current_dev = mgsl_device_list;
4280 while( current_dev->next_device )
4281 current_dev = current_dev->next_device;
4282 current_dev->next_device = info;
4283 }
4284
4285 if ( info->max_frame_size < 4096 )
4286 info->max_frame_size = 4096;
4287 else if ( info->max_frame_size > 65535 )
4288 info->max_frame_size = 65535;
4289
4290 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
4291 printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
4292 info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
4293 info->phys_memory_base, info->phys_lcr_base,
4294 info->max_frame_size );
4295 } else {
4296 printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n",
4297 info->device_name, info->io_base, info->irq_level, info->dma_level,
4298 info->max_frame_size );
4299 }
4300
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08004301#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07004302 hdlcdev_init(info);
4303#endif
4304
4305} /* end of mgsl_add_device() */
4306
4307/* mgsl_allocate_device()
4308 *
4309 * Allocate and initialize a device instance structure
4310 *
4311 * Arguments: none
4312 * Return Value: pointer to mgsl_struct if success, otherwise NULL
4313 */
4314static struct mgsl_struct* mgsl_allocate_device(void)
4315{
4316 struct mgsl_struct *info;
4317
Yoann Padioleaudd00cc42007-07-19 01:49:03 -07004318 info = kzalloc(sizeof(struct mgsl_struct),
Linus Torvalds1da177e2005-04-16 15:20:36 -07004319 GFP_KERNEL);
4320
4321 if (!info) {
4322 printk("Error can't allocate device instance data\n");
4323 } else {
Alan Cox44b7d1b2008-07-16 21:57:18 +01004324 tty_port_init(&info->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004325 info->magic = MGSL_MAGIC;
David Howellsc4028952006-11-22 14:57:56 +00004326 INIT_WORK(&info->task, mgsl_bh_handler);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004327 info->max_frame_size = 4096;
Alan Cox44b7d1b2008-07-16 21:57:18 +01004328 info->port.close_delay = 5*HZ/10;
4329 info->port.closing_wait = 30*HZ;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004330 init_waitqueue_head(&info->status_event_wait_q);
4331 init_waitqueue_head(&info->event_wait_q);
4332 spin_lock_init(&info->irq_spinlock);
4333 spin_lock_init(&info->netlock);
4334 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
4335 info->idle_mode = HDLC_TXIDLE_FLAGS;
4336 info->num_tx_dma_buffers = 1;
4337 info->num_tx_holding_buffers = 0;
4338 }
4339
4340 return info;
4341
4342} /* end of mgsl_allocate_device()*/
4343
Jeff Dikeb68e31d2006-10-02 02:17:18 -07004344static const struct tty_operations mgsl_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004345 .open = mgsl_open,
4346 .close = mgsl_close,
4347 .write = mgsl_write,
4348 .put_char = mgsl_put_char,
4349 .flush_chars = mgsl_flush_chars,
4350 .write_room = mgsl_write_room,
4351 .chars_in_buffer = mgsl_chars_in_buffer,
4352 .flush_buffer = mgsl_flush_buffer,
4353 .ioctl = mgsl_ioctl,
4354 .throttle = mgsl_throttle,
4355 .unthrottle = mgsl_unthrottle,
4356 .send_xchar = mgsl_send_xchar,
4357 .break_ctl = mgsl_break,
4358 .wait_until_sent = mgsl_wait_until_sent,
4359 .read_proc = mgsl_read_proc,
4360 .set_termios = mgsl_set_termios,
4361 .stop = mgsl_stop,
4362 .start = mgsl_start,
4363 .hangup = mgsl_hangup,
4364 .tiocmget = tiocmget,
4365 .tiocmset = tiocmset,
4366};
4367
4368/*
4369 * perform tty device initialization
4370 */
4371static int mgsl_init_tty(void)
4372{
4373 int rc;
4374
4375 serial_driver = alloc_tty_driver(128);
4376 if (!serial_driver)
4377 return -ENOMEM;
4378
4379 serial_driver->owner = THIS_MODULE;
4380 serial_driver->driver_name = "synclink";
4381 serial_driver->name = "ttySL";
4382 serial_driver->major = ttymajor;
4383 serial_driver->minor_start = 64;
4384 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
4385 serial_driver->subtype = SERIAL_TYPE_NORMAL;
4386 serial_driver->init_termios = tty_std_termios;
4387 serial_driver->init_termios.c_cflag =
4388 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
Alan Cox606d0992006-12-08 02:38:45 -08004389 serial_driver->init_termios.c_ispeed = 9600;
4390 serial_driver->init_termios.c_ospeed = 9600;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004391 serial_driver->flags = TTY_DRIVER_REAL_RAW;
4392 tty_set_operations(serial_driver, &mgsl_ops);
4393 if ((rc = tty_register_driver(serial_driver)) < 0) {
4394 printk("%s(%d):Couldn't register serial driver\n",
4395 __FILE__,__LINE__);
4396 put_tty_driver(serial_driver);
4397 serial_driver = NULL;
4398 return rc;
4399 }
4400
4401 printk("%s %s, tty major#%d\n",
4402 driver_name, driver_version,
4403 serial_driver->major);
4404 return 0;
4405}
4406
4407/* enumerate user specified ISA adapters
4408 */
4409static void mgsl_enum_isa_devices(void)
4410{
4411 struct mgsl_struct *info;
4412 int i;
4413
4414 /* Check for user specified ISA devices */
4415
4416 for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
4417 if ( debug_level >= DEBUG_LEVEL_INFO )
4418 printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
4419 io[i], irq[i], dma[i] );
4420
4421 info = mgsl_allocate_device();
4422 if ( !info ) {
4423 /* error allocating device instance data */
4424 if ( debug_level >= DEBUG_LEVEL_ERROR )
4425 printk( "can't allocate device instance data.\n");
4426 continue;
4427 }
4428
4429 /* Copy user configuration info to device instance data */
4430 info->io_base = (unsigned int)io[i];
4431 info->irq_level = (unsigned int)irq[i];
4432 info->irq_level = irq_canonicalize(info->irq_level);
4433 info->dma_level = (unsigned int)dma[i];
4434 info->bus_type = MGSL_BUS_TYPE_ISA;
4435 info->io_addr_size = 16;
4436 info->irq_flags = 0;
4437
4438 mgsl_add_device( info );
4439 }
4440}
4441
4442static void synclink_cleanup(void)
4443{
4444 int rc;
4445 struct mgsl_struct *info;
4446 struct mgsl_struct *tmp;
4447
4448 printk("Unloading %s: %s\n", driver_name, driver_version);
4449
4450 if (serial_driver) {
4451 if ((rc = tty_unregister_driver(serial_driver)))
4452 printk("%s(%d) failed to unregister tty driver err=%d\n",
4453 __FILE__,__LINE__,rc);
4454 put_tty_driver(serial_driver);
4455 }
4456
4457 info = mgsl_device_list;
4458 while(info) {
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08004459#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07004460 hdlcdev_exit(info);
4461#endif
4462 mgsl_release_resources(info);
4463 tmp = info;
4464 info = info->next_device;
4465 kfree(tmp);
4466 }
4467
Linus Torvalds1da177e2005-04-16 15:20:36 -07004468 if (pci_registered)
4469 pci_unregister_driver(&synclink_pci_driver);
4470}
4471
4472static int __init synclink_init(void)
4473{
4474 int rc;
4475
4476 if (break_on_load) {
4477 mgsl_get_text_ptr();
4478 BREAKPOINT();
4479 }
4480
4481 printk("%s %s\n", driver_name, driver_version);
4482
4483 mgsl_enum_isa_devices();
4484 if ((rc = pci_register_driver(&synclink_pci_driver)) < 0)
4485 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
4486 else
Joe Perches0fab6de2008-04-28 02:14:02 -07004487 pci_registered = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004488
4489 if ((rc = mgsl_init_tty()) < 0)
4490 goto error;
4491
4492 return 0;
4493
4494error:
4495 synclink_cleanup();
4496 return rc;
4497}
4498
4499static void __exit synclink_exit(void)
4500{
4501 synclink_cleanup();
4502}
4503
4504module_init(synclink_init);
4505module_exit(synclink_exit);
4506
4507/*
4508 * usc_RTCmd()
4509 *
4510 * Issue a USC Receive/Transmit command to the
4511 * Channel Command/Address Register (CCAR).
4512 *
4513 * Notes:
4514 *
4515 * The command is encoded in the most significant 5 bits <15..11>
4516 * of the CCAR value. Bits <10..7> of the CCAR must be preserved
4517 * and Bits <6..0> must be written as zeros.
4518 *
4519 * Arguments:
4520 *
4521 * info pointer to device information structure
4522 * Cmd command mask (use symbolic macros)
4523 *
4524 * Return Value:
4525 *
4526 * None
4527 */
4528static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd )
4529{
4530 /* output command to CCAR in bits <15..11> */
4531 /* preserve bits <10..7>, bits <6..0> must be zero */
4532
4533 outw( Cmd + info->loopback_bits, info->io_base + CCAR );
4534
4535 /* Read to flush write to CCAR */
4536 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4537 inw( info->io_base + CCAR );
4538
4539} /* end of usc_RTCmd() */
4540
4541/*
4542 * usc_DmaCmd()
4543 *
4544 * Issue a DMA command to the DMA Command/Address Register (DCAR).
4545 *
4546 * Arguments:
4547 *
4548 * info pointer to device information structure
4549 * Cmd DMA command mask (usc_DmaCmd_XX Macros)
4550 *
4551 * Return Value:
4552 *
4553 * None
4554 */
4555static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd )
4556{
4557 /* write command mask to DCAR */
4558 outw( Cmd + info->mbre_bit, info->io_base );
4559
4560 /* Read to flush write to DCAR */
4561 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4562 inw( info->io_base );
4563
4564} /* end of usc_DmaCmd() */
4565
4566/*
4567 * usc_OutDmaReg()
4568 *
4569 * Write a 16-bit value to a USC DMA register
4570 *
4571 * Arguments:
4572 *
4573 * info pointer to device info structure
4574 * RegAddr register address (number) for write
4575 * RegValue 16-bit value to write to register
4576 *
4577 * Return Value:
4578 *
4579 * None
4580 *
4581 */
4582static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4583{
4584 /* Note: The DCAR is located at the adapter base address */
4585 /* Note: must preserve state of BIT8 in DCAR */
4586
4587 outw( RegAddr + info->mbre_bit, info->io_base );
4588 outw( RegValue, info->io_base );
4589
4590 /* Read to flush write to DCAR */
4591 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4592 inw( info->io_base );
4593
4594} /* end of usc_OutDmaReg() */
4595
4596/*
4597 * usc_InDmaReg()
4598 *
4599 * Read a 16-bit value from a DMA register
4600 *
4601 * Arguments:
4602 *
4603 * info pointer to device info structure
4604 * RegAddr register address (number) to read from
4605 *
4606 * Return Value:
4607 *
4608 * The 16-bit value read from register
4609 *
4610 */
4611static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
4612{
4613 /* Note: The DCAR is located at the adapter base address */
4614 /* Note: must preserve state of BIT8 in DCAR */
4615
4616 outw( RegAddr + info->mbre_bit, info->io_base );
4617 return inw( info->io_base );
4618
4619} /* end of usc_InDmaReg() */
4620
4621/*
4622 *
4623 * usc_OutReg()
4624 *
4625 * Write a 16-bit value to a USC serial channel register
4626 *
4627 * Arguments:
4628 *
4629 * info pointer to device info structure
4630 * RegAddr register address (number) to write to
4631 * RegValue 16-bit value to write to register
4632 *
4633 * Return Value:
4634 *
4635 * None
4636 *
4637 */
4638static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
4639{
4640 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4641 outw( RegValue, info->io_base + CCAR );
4642
4643 /* Read to flush write to CCAR */
4644 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4645 inw( info->io_base + CCAR );
4646
4647} /* end of usc_OutReg() */
4648
4649/*
4650 * usc_InReg()
4651 *
4652 * Reads a 16-bit value from a USC serial channel register
4653 *
4654 * Arguments:
4655 *
4656 * info pointer to device extension
4657 * RegAddr register address (number) to read from
4658 *
4659 * Return Value:
4660 *
4661 * 16-bit value read from register
4662 */
4663static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr )
4664{
4665 outw( RegAddr + info->loopback_bits, info->io_base + CCAR );
4666 return inw( info->io_base + CCAR );
4667
4668} /* end of usc_InReg() */
4669
4670/* usc_set_sdlc_mode()
4671 *
4672 * Set up the adapter for SDLC DMA communications.
4673 *
4674 * Arguments: info pointer to device instance data
4675 * Return Value: NONE
4676 */
4677static void usc_set_sdlc_mode( struct mgsl_struct *info )
4678{
4679 u16 RegValue;
Joe Perches0fab6de2008-04-28 02:14:02 -07004680 bool PreSL1660;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004681
4682 /*
4683 * determine if the IUSC on the adapter is pre-SL1660. If
4684 * not, take advantage of the UnderWait feature of more
4685 * modern chips. If an underrun occurs and this bit is set,
4686 * the transmitter will idle the programmed idle pattern
4687 * until the driver has time to service the underrun. Otherwise,
4688 * the dma controller may get the cycles previously requested
4689 * and begin transmitting queued tx data.
4690 */
4691 usc_OutReg(info,TMCR,0x1f);
4692 RegValue=usc_InReg(info,TMDR);
Joe Perches0fab6de2008-04-28 02:14:02 -07004693 PreSL1660 = (RegValue == IUSC_PRE_SL1660);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004694
4695 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
4696 {
4697 /*
4698 ** Channel Mode Register (CMR)
4699 **
4700 ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun
4701 ** <13> 0 0 = Transmit Disabled (initially)
4702 ** <12> 0 1 = Consecutive Idles share common 0
4703 ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop
4704 ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling
4705 ** <3..0> 0110 Receiver Mode = HDLC/SDLC
4706 **
4707 ** 1000 1110 0000 0110 = 0x8e06
4708 */
4709 RegValue = 0x8e06;
4710
4711 /*--------------------------------------------------
4712 * ignore user options for UnderRun Actions and
4713 * preambles
4714 *--------------------------------------------------*/
4715 }
4716 else
4717 {
4718 /* Channel mode Register (CMR)
4719 *
4720 * <15..14> 00 Tx Sub modes, Underrun Action
4721 * <13> 0 1 = Send Preamble before opening flag
4722 * <12> 0 1 = Consecutive Idles share common 0
4723 * <11..8> 0110 Transmitter mode = HDLC/SDLC
4724 * <7..4> 0000 Rx Sub modes, addr/ctrl field handling
4725 * <3..0> 0110 Receiver mode = HDLC/SDLC
4726 *
4727 * 0000 0110 0000 0110 = 0x0606
4728 */
4729 if (info->params.mode == MGSL_MODE_RAW) {
4730 RegValue = 0x0001; /* Set Receive mode = external sync */
4731
4732 usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */
4733 (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12));
4734
4735 /*
4736 * TxSubMode:
4737 * CMR <15> 0 Don't send CRC on Tx Underrun
4738 * CMR <14> x undefined
4739 * CMR <13> 0 Send preamble before openning sync
4740 * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength
4741 *
4742 * TxMode:
4743 * CMR <11-8) 0100 MonoSync
4744 *
4745 * 0x00 0100 xxxx xxxx 04xx
4746 */
4747 RegValue |= 0x0400;
4748 }
4749 else {
4750
4751 RegValue = 0x0606;
4752
4753 if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 )
4754 RegValue |= BIT14;
4755 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG )
4756 RegValue |= BIT15;
4757 else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC )
4758 RegValue |= BIT15 + BIT14;
4759 }
4760
4761 if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE )
4762 RegValue |= BIT13;
4763 }
4764
4765 if ( info->params.mode == MGSL_MODE_HDLC &&
4766 (info->params.flags & HDLC_FLAG_SHARE_ZERO) )
4767 RegValue |= BIT12;
4768
4769 if ( info->params.addr_filter != 0xff )
4770 {
4771 /* set up receive address filtering */
4772 usc_OutReg( info, RSR, info->params.addr_filter );
4773 RegValue |= BIT4;
4774 }
4775
4776 usc_OutReg( info, CMR, RegValue );
4777 info->cmr_value = RegValue;
4778
4779 /* Receiver mode Register (RMR)
4780 *
4781 * <15..13> 000 encoding
4782 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4783 * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC)
4784 * <9> 0 1 = Include Receive chars in CRC
4785 * <8> 1 1 = Use Abort/PE bit as abort indicator
4786 * <7..6> 00 Even parity
4787 * <5> 0 parity disabled
4788 * <4..2> 000 Receive Char Length = 8 bits
4789 * <1..0> 00 Disable Receiver
4790 *
4791 * 0000 0101 0000 0000 = 0x0500
4792 */
4793
4794 RegValue = 0x0500;
4795
4796 switch ( info->params.encoding ) {
4797 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4798 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4799 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break;
4800 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4801 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break;
4802 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break;
4803 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
4804 }
4805
4806 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4807 RegValue |= BIT9;
4808 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4809 RegValue |= ( BIT12 | BIT10 | BIT9 );
4810
4811 usc_OutReg( info, RMR, RegValue );
4812
4813 /* Set the Receive count Limit Register (RCLR) to 0xffff. */
4814 /* When an opening flag of an SDLC frame is recognized the */
4815 /* Receive Character count (RCC) is loaded with the value in */
4816 /* RCLR. The RCC is decremented for each received byte. The */
4817 /* value of RCC is stored after the closing flag of the frame */
4818 /* allowing the frame size to be computed. */
4819
4820 usc_OutReg( info, RCLR, RCLRVALUE );
4821
4822 usc_RCmd( info, RCmd_SelectRicrdma_level );
4823
4824 /* Receive Interrupt Control Register (RICR)
4825 *
4826 * <15..8> ? RxFIFO DMA Request Level
4827 * <7> 0 Exited Hunt IA (Interrupt Arm)
4828 * <6> 0 Idle Received IA
4829 * <5> 0 Break/Abort IA
4830 * <4> 0 Rx Bound IA
4831 * <3> 1 Queued status reflects oldest 2 bytes in FIFO
4832 * <2> 0 Abort/PE IA
4833 * <1> 1 Rx Overrun IA
4834 * <0> 0 Select TC0 value for readback
4835 *
4836 * 0000 0000 0000 1000 = 0x000a
4837 */
4838
4839 /* Carry over the Exit Hunt and Idle Received bits */
4840 /* in case they have been armed by usc_ArmEvents. */
4841
4842 RegValue = usc_InReg( info, RICR ) & 0xc0;
4843
4844 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4845 usc_OutReg( info, RICR, (u16)(0x030a | RegValue) );
4846 else
4847 usc_OutReg( info, RICR, (u16)(0x140a | RegValue) );
4848
4849 /* Unlatch all Rx status bits and clear Rx status IRQ Pending */
4850
4851 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
4852 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
4853
4854 /* Transmit mode Register (TMR)
4855 *
4856 * <15..13> 000 encoding
4857 * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
4858 * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC)
4859 * <9> 0 1 = Tx CRC Enabled
4860 * <8> 0 1 = Append CRC to end of transmit frame
4861 * <7..6> 00 Transmit parity Even
4862 * <5> 0 Transmit parity Disabled
4863 * <4..2> 000 Tx Char Length = 8 bits
4864 * <1..0> 00 Disable Transmitter
4865 *
4866 * 0000 0100 0000 0000 = 0x0400
4867 */
4868
4869 RegValue = 0x0400;
4870
4871 switch ( info->params.encoding ) {
4872 case HDLC_ENCODING_NRZB: RegValue |= BIT13; break;
4873 case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break;
4874 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break;
4875 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break;
4876 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break;
4877 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break;
4878 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break;
4879 }
4880
4881 if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT )
4882 RegValue |= BIT9 + BIT8;
4883 else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT )
4884 RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8);
4885
4886 usc_OutReg( info, TMR, RegValue );
4887
4888 usc_set_txidle( info );
4889
4890
4891 usc_TCmd( info, TCmd_SelectTicrdma_level );
4892
4893 /* Transmit Interrupt Control Register (TICR)
4894 *
4895 * <15..8> ? Transmit FIFO DMA Level
4896 * <7> 0 Present IA (Interrupt Arm)
4897 * <6> 0 Idle Sent IA
4898 * <5> 1 Abort Sent IA
4899 * <4> 1 EOF/EOM Sent IA
4900 * <3> 0 CRC Sent IA
4901 * <2> 1 1 = Wait for SW Trigger to Start Frame
4902 * <1> 1 Tx Underrun IA
4903 * <0> 0 TC0 constant on read back
4904 *
4905 * 0000 0000 0011 0110 = 0x0036
4906 */
4907
4908 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
4909 usc_OutReg( info, TICR, 0x0736 );
4910 else
4911 usc_OutReg( info, TICR, 0x1436 );
4912
4913 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
4914 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
4915
4916 /*
4917 ** Transmit Command/Status Register (TCSR)
4918 **
4919 ** <15..12> 0000 TCmd
4920 ** <11> 0/1 UnderWait
4921 ** <10..08> 000 TxIdle
4922 ** <7> x PreSent
4923 ** <6> x IdleSent
4924 ** <5> x AbortSent
4925 ** <4> x EOF/EOM Sent
4926 ** <3> x CRC Sent
4927 ** <2> x All Sent
4928 ** <1> x TxUnder
4929 ** <0> x TxEmpty
4930 **
4931 ** 0000 0000 0000 0000 = 0x0000
4932 */
4933 info->tcsr_value = 0;
4934
4935 if ( !PreSL1660 )
4936 info->tcsr_value |= TCSR_UNDERWAIT;
4937
4938 usc_OutReg( info, TCSR, info->tcsr_value );
4939
4940 /* Clock mode Control Register (CMCR)
4941 *
4942 * <15..14> 00 counter 1 Source = Disabled
4943 * <13..12> 00 counter 0 Source = Disabled
4944 * <11..10> 11 BRG1 Input is TxC Pin
4945 * <9..8> 11 BRG0 Input is TxC Pin
4946 * <7..6> 01 DPLL Input is BRG1 Output
4947 * <5..3> XXX TxCLK comes from Port 0
4948 * <2..0> XXX RxCLK comes from Port 1
4949 *
4950 * 0000 1111 0111 0111 = 0x0f77
4951 */
4952
4953 RegValue = 0x0f40;
4954
4955 if ( info->params.flags & HDLC_FLAG_RXC_DPLL )
4956 RegValue |= 0x0003; /* RxCLK from DPLL */
4957 else if ( info->params.flags & HDLC_FLAG_RXC_BRG )
4958 RegValue |= 0x0004; /* RxCLK from BRG0 */
4959 else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN)
4960 RegValue |= 0x0006; /* RxCLK from TXC Input */
4961 else
4962 RegValue |= 0x0007; /* RxCLK from Port1 */
4963
4964 if ( info->params.flags & HDLC_FLAG_TXC_DPLL )
4965 RegValue |= 0x0018; /* TxCLK from DPLL */
4966 else if ( info->params.flags & HDLC_FLAG_TXC_BRG )
4967 RegValue |= 0x0020; /* TxCLK from BRG0 */
4968 else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN)
4969 RegValue |= 0x0038; /* RxCLK from TXC Input */
4970 else
4971 RegValue |= 0x0030; /* TxCLK from Port0 */
4972
4973 usc_OutReg( info, CMCR, RegValue );
4974
4975
4976 /* Hardware Configuration Register (HCR)
4977 *
4978 * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4
4979 * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div
4980 * <12> 0 CVOK:0=report code violation in biphase
4981 * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4
4982 * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level
4983 * <7..6> 00 reserved
4984 * <5> 0 BRG1 mode:0=continuous,1=single cycle
4985 * <4> X BRG1 Enable
4986 * <3..2> 00 reserved
4987 * <1> 0 BRG0 mode:0=continuous,1=single cycle
4988 * <0> 0 BRG0 Enable
4989 */
4990
4991 RegValue = 0x0000;
4992
4993 if ( info->params.flags & (HDLC_FLAG_RXC_DPLL + HDLC_FLAG_TXC_DPLL) ) {
4994 u32 XtalSpeed;
4995 u32 DpllDivisor;
4996 u16 Tc;
4997
4998 /* DPLL is enabled. Use BRG1 to provide continuous reference clock */
4999 /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */
5000
5001 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
5002 XtalSpeed = 11059200;
5003 else
5004 XtalSpeed = 14745600;
5005
5006 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
5007 DpllDivisor = 16;
5008 RegValue |= BIT10;
5009 }
5010 else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
5011 DpllDivisor = 8;
5012 RegValue |= BIT11;
5013 }
5014 else
5015 DpllDivisor = 32;
5016
5017 /* Tc = (Xtal/Speed) - 1 */
5018 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
5019 /* then rounding up gives a more precise time constant. Instead */
5020 /* of rounding up and then subtracting 1 we just don't subtract */
5021 /* the one in this case. */
5022
5023 /*--------------------------------------------------
5024 * ejz: for DPLL mode, application should use the
5025 * same clock speed as the partner system, even
5026 * though clocking is derived from the input RxData.
5027 * In case the user uses a 0 for the clock speed,
5028 * default to 0xffffffff and don't try to divide by
5029 * zero
5030 *--------------------------------------------------*/
5031 if ( info->params.clock_speed )
5032 {
5033 Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed);
5034 if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2)
5035 / info->params.clock_speed) )
5036 Tc--;
5037 }
5038 else
5039 Tc = -1;
5040
5041
5042 /* Write 16-bit Time Constant for BRG1 */
5043 usc_OutReg( info, TC1R, Tc );
5044
5045 RegValue |= BIT4; /* enable BRG1 */
5046
5047 switch ( info->params.encoding ) {
5048 case HDLC_ENCODING_NRZ:
5049 case HDLC_ENCODING_NRZB:
5050 case HDLC_ENCODING_NRZI_MARK:
5051 case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break;
5052 case HDLC_ENCODING_BIPHASE_MARK:
5053 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break;
5054 case HDLC_ENCODING_BIPHASE_LEVEL:
5055 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 + BIT8; break;
5056 }
5057 }
5058
5059 usc_OutReg( info, HCR, RegValue );
5060
5061
5062 /* Channel Control/status Register (CCSR)
5063 *
5064 * <15> X RCC FIFO Overflow status (RO)
5065 * <14> X RCC FIFO Not Empty status (RO)
5066 * <13> 0 1 = Clear RCC FIFO (WO)
5067 * <12> X DPLL Sync (RW)
5068 * <11> X DPLL 2 Missed Clocks status (RO)
5069 * <10> X DPLL 1 Missed Clock status (RO)
5070 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
5071 * <7> X SDLC Loop On status (RO)
5072 * <6> X SDLC Loop Send status (RO)
5073 * <5> 1 Bypass counters for TxClk and RxClk (RW)
5074 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
5075 * <1..0> 00 reserved
5076 *
5077 * 0000 0000 0010 0000 = 0x0020
5078 */
5079
5080 usc_OutReg( info, CCSR, 0x1020 );
5081
5082
5083 if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) {
5084 usc_OutReg( info, SICR,
5085 (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
5086 }
5087
5088
5089 /* enable Master Interrupt Enable bit (MIE) */
5090 usc_EnableMasterIrqBit( info );
5091
5092 usc_ClearIrqPendingBits( info, RECEIVE_STATUS + RECEIVE_DATA +
5093 TRANSMIT_STATUS + TRANSMIT_DATA + MISC);
5094
5095 /* arm RCC underflow interrupt */
5096 usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3));
5097 usc_EnableInterrupts(info, MISC);
5098
5099 info->mbre_bit = 0;
5100 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5101 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5102 info->mbre_bit = BIT8;
5103 outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */
5104
5105 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
5106 /* Enable DMAEN (Port 7, Bit 14) */
5107 /* This connects the DMA request signal to the ISA bus */
5108 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14));
5109 }
5110
5111 /* DMA Control Register (DCR)
5112 *
5113 * <15..14> 10 Priority mode = Alternating Tx/Rx
5114 * 01 Rx has priority
5115 * 00 Tx has priority
5116 *
5117 * <13> 1 Enable Priority Preempt per DCR<15..14>
5118 * (WARNING DCR<11..10> must be 00 when this is 1)
5119 * 0 Choose activate channel per DCR<11..10>
5120 *
5121 * <12> 0 Little Endian for Array/List
5122 * <11..10> 00 Both Channels can use each bus grant
5123 * <9..6> 0000 reserved
5124 * <5> 0 7 CLK - Minimum Bus Re-request Interval
5125 * <4> 0 1 = drive D/C and S/D pins
5126 * <3> 1 1 = Add one wait state to all DMA cycles.
5127 * <2> 0 1 = Strobe /UAS on every transfer.
5128 * <1..0> 11 Addr incrementing only affects LS24 bits
5129 *
5130 * 0110 0000 0000 1011 = 0x600b
5131 */
5132
5133 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5134 /* PCI adapter does not need DMA wait state */
5135 usc_OutDmaReg( info, DCR, 0xa00b );
5136 }
5137 else
5138 usc_OutDmaReg( info, DCR, 0x800b );
5139
5140
5141 /* Receive DMA mode Register (RDMR)
5142 *
5143 * <15..14> 11 DMA mode = Linked List Buffer mode
5144 * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry
5145 * <12> 1 Clear count of List Entry after fetching
5146 * <11..10> 00 Address mode = Increment
5147 * <9> 1 Terminate Buffer on RxBound
5148 * <8> 0 Bus Width = 16bits
5149 * <7..0> ? status Bits (write as 0s)
5150 *
5151 * 1111 0010 0000 0000 = 0xf200
5152 */
5153
5154 usc_OutDmaReg( info, RDMR, 0xf200 );
5155
5156
5157 /* Transmit DMA mode Register (TDMR)
5158 *
5159 * <15..14> 11 DMA mode = Linked List Buffer mode
5160 * <13> 1 TCBinA/L = fetch Tx Control Block from List entry
5161 * <12> 1 Clear count of List Entry after fetching
5162 * <11..10> 00 Address mode = Increment
5163 * <9> 1 Terminate Buffer on end of frame
5164 * <8> 0 Bus Width = 16bits
5165 * <7..0> ? status Bits (Read Only so write as 0)
5166 *
5167 * 1111 0010 0000 0000 = 0xf200
5168 */
5169
5170 usc_OutDmaReg( info, TDMR, 0xf200 );
5171
5172
5173 /* DMA Interrupt Control Register (DICR)
5174 *
5175 * <15> 1 DMA Interrupt Enable
5176 * <14> 0 1 = Disable IEO from USC
5177 * <13> 0 1 = Don't provide vector during IntAck
5178 * <12> 1 1 = Include status in Vector
5179 * <10..2> 0 reserved, Must be 0s
5180 * <1> 0 1 = Rx DMA Interrupt Enabled
5181 * <0> 0 1 = Tx DMA Interrupt Enabled
5182 *
5183 * 1001 0000 0000 0000 = 0x9000
5184 */
5185
5186 usc_OutDmaReg( info, DICR, 0x9000 );
5187
5188 usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */
5189 usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */
5190 usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */
5191
5192 /* Channel Control Register (CCR)
5193 *
5194 * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs)
5195 * <13> 0 Trigger Tx on SW Command Disabled
5196 * <12> 0 Flag Preamble Disabled
5197 * <11..10> 00 Preamble Length
5198 * <9..8> 00 Preamble Pattern
5199 * <7..6> 10 Use 32-bit Rx status Blocks (RSBs)
5200 * <5> 0 Trigger Rx on SW Command Disabled
5201 * <4..0> 0 reserved
5202 *
5203 * 1000 0000 1000 0000 = 0x8080
5204 */
5205
5206 RegValue = 0x8080;
5207
5208 switch ( info->params.preamble_length ) {
5209 case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break;
5210 case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break;
5211 case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 + BIT10; break;
5212 }
5213
5214 switch ( info->params.preamble ) {
5215 case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 + BIT12; break;
5216 case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break;
5217 case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break;
5218 case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 + BIT8; break;
5219 }
5220
5221 usc_OutReg( info, CCR, RegValue );
5222
5223
5224 /*
5225 * Burst/Dwell Control Register
5226 *
5227 * <15..8> 0x20 Maximum number of transfers per bus grant
5228 * <7..0> 0x00 Maximum number of clock cycles per bus grant
5229 */
5230
5231 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5232 /* don't limit bus occupancy on PCI adapter */
5233 usc_OutDmaReg( info, BDCR, 0x0000 );
5234 }
5235 else
5236 usc_OutDmaReg( info, BDCR, 0x2000 );
5237
5238 usc_stop_transmitter(info);
5239 usc_stop_receiver(info);
5240
5241} /* end of usc_set_sdlc_mode() */
5242
5243/* usc_enable_loopback()
5244 *
5245 * Set the 16C32 for internal loopback mode.
5246 * The TxCLK and RxCLK signals are generated from the BRG0 and
5247 * the TxD is looped back to the RxD internally.
5248 *
5249 * Arguments: info pointer to device instance data
5250 * enable 1 = enable loopback, 0 = disable
5251 * Return Value: None
5252 */
5253static void usc_enable_loopback(struct mgsl_struct *info, int enable)
5254{
5255 if (enable) {
5256 /* blank external TXD output */
5257 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7+BIT6));
5258
5259 /* Clock mode Control Register (CMCR)
5260 *
5261 * <15..14> 00 counter 1 Disabled
5262 * <13..12> 00 counter 0 Disabled
5263 * <11..10> 11 BRG1 Input is TxC Pin
5264 * <9..8> 11 BRG0 Input is TxC Pin
5265 * <7..6> 01 DPLL Input is BRG1 Output
5266 * <5..3> 100 TxCLK comes from BRG0
5267 * <2..0> 100 RxCLK comes from BRG0
5268 *
5269 * 0000 1111 0110 0100 = 0x0f64
5270 */
5271
5272 usc_OutReg( info, CMCR, 0x0f64 );
5273
5274 /* Write 16-bit Time Constant for BRG0 */
5275 /* use clock speed if available, otherwise use 8 for diagnostics */
5276 if (info->params.clock_speed) {
5277 if (info->bus_type == MGSL_BUS_TYPE_PCI)
5278 usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1));
5279 else
5280 usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1));
5281 } else
5282 usc_OutReg(info, TC0R, (u16)8);
5283
5284 /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0
5285 mode = Continuous Set Bit 0 to enable BRG0. */
5286 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5287
5288 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5289 usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004));
5290
5291 /* set Internal Data loopback mode */
5292 info->loopback_bits = 0x300;
5293 outw( 0x0300, info->io_base + CCAR );
5294 } else {
5295 /* enable external TXD output */
5296 usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7+BIT6));
5297
5298 /* clear Internal Data loopback mode */
5299 info->loopback_bits = 0;
5300 outw( 0,info->io_base + CCAR );
5301 }
5302
5303} /* end of usc_enable_loopback() */
5304
5305/* usc_enable_aux_clock()
5306 *
5307 * Enabled the AUX clock output at the specified frequency.
5308 *
5309 * Arguments:
5310 *
5311 * info pointer to device extension
5312 * data_rate data rate of clock in bits per second
5313 * A data rate of 0 disables the AUX clock.
5314 *
5315 * Return Value: None
5316 */
5317static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate )
5318{
5319 u32 XtalSpeed;
5320 u16 Tc;
5321
5322 if ( data_rate ) {
5323 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
5324 XtalSpeed = 11059200;
5325 else
5326 XtalSpeed = 14745600;
5327
5328
5329 /* Tc = (Xtal/Speed) - 1 */
5330 /* If twice the remainder of (Xtal/Speed) is greater than Speed */
5331 /* then rounding up gives a more precise time constant. Instead */
5332 /* of rounding up and then subtracting 1 we just don't subtract */
5333 /* the one in this case. */
5334
5335
5336 Tc = (u16)(XtalSpeed/data_rate);
5337 if ( !(((XtalSpeed % data_rate) * 2) / data_rate) )
5338 Tc--;
5339
5340 /* Write 16-bit Time Constant for BRG0 */
5341 usc_OutReg( info, TC0R, Tc );
5342
5343 /*
5344 * Hardware Configuration Register (HCR)
5345 * Clear Bit 1, BRG0 mode = Continuous
5346 * Set Bit 0 to enable BRG0.
5347 */
5348
5349 usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
5350
5351 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
5352 usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
5353 } else {
5354 /* data rate == 0 so turn off BRG0 */
5355 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
5356 }
5357
5358} /* end of usc_enable_aux_clock() */
5359
5360/*
5361 *
5362 * usc_process_rxoverrun_sync()
5363 *
5364 * This function processes a receive overrun by resetting the
5365 * receive DMA buffers and issuing a Purge Rx FIFO command
5366 * to allow the receiver to continue receiving.
5367 *
5368 * Arguments:
5369 *
5370 * info pointer to device extension
5371 *
5372 * Return Value: None
5373 */
5374static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
5375{
5376 int start_index;
5377 int end_index;
5378 int frame_start_index;
Joe Perches0fab6de2008-04-28 02:14:02 -07005379 bool start_of_frame_found = false;
5380 bool end_of_frame_found = false;
5381 bool reprogram_dma = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005382
5383 DMABUFFERENTRY *buffer_list = info->rx_buffer_list;
5384 u32 phys_addr;
5385
5386 usc_DmaCmd( info, DmaCmd_PauseRxChannel );
5387 usc_RCmd( info, RCmd_EnterHuntmode );
5388 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5389
5390 /* CurrentRxBuffer points to the 1st buffer of the next */
5391 /* possibly available receive frame. */
5392
5393 frame_start_index = start_index = end_index = info->current_rx_buffer;
5394
5395 /* Search for an unfinished string of buffers. This means */
5396 /* that a receive frame started (at least one buffer with */
5397 /* count set to zero) but there is no terminiting buffer */
5398 /* (status set to non-zero). */
5399
5400 while( !buffer_list[end_index].count )
5401 {
5402 /* Count field has been reset to zero by 16C32. */
5403 /* This buffer is currently in use. */
5404
5405 if ( !start_of_frame_found )
5406 {
Joe Perches0fab6de2008-04-28 02:14:02 -07005407 start_of_frame_found = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005408 frame_start_index = end_index;
Joe Perches0fab6de2008-04-28 02:14:02 -07005409 end_of_frame_found = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005410 }
5411
5412 if ( buffer_list[end_index].status )
5413 {
5414 /* Status field has been set by 16C32. */
5415 /* This is the last buffer of a received frame. */
5416
5417 /* We want to leave the buffers for this frame intact. */
5418 /* Move on to next possible frame. */
5419
Joe Perches0fab6de2008-04-28 02:14:02 -07005420 start_of_frame_found = false;
5421 end_of_frame_found = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005422 }
5423
5424 /* advance to next buffer entry in linked list */
5425 end_index++;
5426 if ( end_index == info->rx_buffer_count )
5427 end_index = 0;
5428
5429 if ( start_index == end_index )
5430 {
5431 /* The entire list has been searched with all Counts == 0 and */
5432 /* all Status == 0. The receive buffers are */
5433 /* completely screwed, reset all receive buffers! */
5434 mgsl_reset_rx_dma_buffers( info );
5435 frame_start_index = 0;
Joe Perches0fab6de2008-04-28 02:14:02 -07005436 start_of_frame_found = false;
5437 reprogram_dma = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005438 break;
5439 }
5440 }
5441
5442 if ( start_of_frame_found && !end_of_frame_found )
5443 {
5444 /* There is an unfinished string of receive DMA buffers */
5445 /* as a result of the receiver overrun. */
5446
5447 /* Reset the buffers for the unfinished frame */
5448 /* and reprogram the receive DMA controller to start */
5449 /* at the 1st buffer of unfinished frame. */
5450
5451 start_index = frame_start_index;
5452
5453 do
5454 {
5455 *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE;
5456
5457 /* Adjust index for wrap around. */
5458 if ( start_index == info->rx_buffer_count )
5459 start_index = 0;
5460
5461 } while( start_index != end_index );
5462
Joe Perches0fab6de2008-04-28 02:14:02 -07005463 reprogram_dma = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005464 }
5465
5466 if ( reprogram_dma )
5467 {
5468 usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
5469 usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5470 usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
5471
5472 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5473
5474 /* This empties the receive FIFO and loads the RCC with RCLR */
5475 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5476
5477 /* program 16C32 with physical address of 1st DMA buffer entry */
5478 phys_addr = info->rx_buffer_list[frame_start_index].phys_entry;
5479 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5480 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5481
5482 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5483 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5484 usc_EnableInterrupts( info, RECEIVE_STATUS );
5485
5486 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5487 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5488
5489 usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
5490 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5491 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5492 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5493 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5494 else
5495 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5496 }
5497 else
5498 {
5499 /* This empties the receive FIFO and loads the RCC with RCLR */
5500 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5501 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5502 }
5503
5504} /* end of usc_process_rxoverrun_sync() */
5505
5506/* usc_stop_receiver()
5507 *
5508 * Disable USC receiver
5509 *
5510 * Arguments: info pointer to device instance data
5511 * Return Value: None
5512 */
5513static void usc_stop_receiver( struct mgsl_struct *info )
5514{
5515 if (debug_level >= DEBUG_LEVEL_ISR)
5516 printk("%s(%d):usc_stop_receiver(%s)\n",
5517 __FILE__,__LINE__, info->device_name );
5518
5519 /* Disable receive DMA channel. */
5520 /* This also disables receive DMA channel interrupts */
5521 usc_DmaCmd( info, DmaCmd_ResetRxChannel );
5522
5523 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5524 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5525 usc_DisableInterrupts( info, RECEIVE_DATA + RECEIVE_STATUS );
5526
5527 usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
5528
5529 /* This empties the receive FIFO and loads the RCC with RCLR */
5530 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5531 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5532
Joe Perches0fab6de2008-04-28 02:14:02 -07005533 info->rx_enabled = false;
5534 info->rx_overflow = false;
5535 info->rx_rcc_underrun = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005536
5537} /* end of stop_receiver() */
5538
5539/* usc_start_receiver()
5540 *
5541 * Enable the USC receiver
5542 *
5543 * Arguments: info pointer to device instance data
5544 * Return Value: None
5545 */
5546static void usc_start_receiver( struct mgsl_struct *info )
5547{
5548 u32 phys_addr;
5549
5550 if (debug_level >= DEBUG_LEVEL_ISR)
5551 printk("%s(%d):usc_start_receiver(%s)\n",
5552 __FILE__,__LINE__, info->device_name );
5553
5554 mgsl_reset_rx_dma_buffers( info );
5555 usc_stop_receiver( info );
5556
5557 usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
5558 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5559
5560 if ( info->params.mode == MGSL_MODE_HDLC ||
5561 info->params.mode == MGSL_MODE_RAW ) {
5562 /* DMA mode Transfers */
5563 /* Program the DMA controller. */
5564 /* Enable the DMA controller end of buffer interrupt. */
5565
5566 /* program 16C32 with physical address of 1st DMA buffer entry */
5567 phys_addr = info->rx_buffer_list[0].phys_entry;
5568 usc_OutDmaReg( info, NRARL, (u16)phys_addr );
5569 usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) );
5570
5571 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
5572 usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS );
5573 usc_EnableInterrupts( info, RECEIVE_STATUS );
5574
5575 /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */
5576 /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */
5577
5578 usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 );
5579 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) );
5580 usc_DmaCmd( info, DmaCmd_InitRxChannel );
5581 if ( info->params.flags & HDLC_FLAG_AUTO_DCD )
5582 usc_EnableReceiver(info,ENABLE_AUTO_DCD);
5583 else
5584 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5585 } else {
5586 usc_UnlatchRxstatusBits(info, RXSTATUS_ALL);
5587 usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS);
5588 usc_EnableInterrupts(info, RECEIVE_DATA);
5589
5590 usc_RTCmd( info, RTCmd_PurgeRxFifo );
5591 usc_RCmd( info, RCmd_EnterHuntmode );
5592
5593 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
5594 }
5595
5596 usc_OutReg( info, CCSR, 0x1020 );
5597
Joe Perches0fab6de2008-04-28 02:14:02 -07005598 info->rx_enabled = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005599
5600} /* end of usc_start_receiver() */
5601
5602/* usc_start_transmitter()
5603 *
5604 * Enable the USC transmitter and send a transmit frame if
5605 * one is loaded in the DMA buffers.
5606 *
5607 * Arguments: info pointer to device instance data
5608 * Return Value: None
5609 */
5610static void usc_start_transmitter( struct mgsl_struct *info )
5611{
5612 u32 phys_addr;
5613 unsigned int FrameSize;
5614
5615 if (debug_level >= DEBUG_LEVEL_ISR)
5616 printk("%s(%d):usc_start_transmitter(%s)\n",
5617 __FILE__,__LINE__, info->device_name );
5618
5619 if ( info->xmit_cnt ) {
5620
5621 /* If auto RTS enabled and RTS is inactive, then assert */
5622 /* RTS and set a flag indicating that the driver should */
5623 /* negate RTS when the transmission completes. */
5624
Joe Perches0fab6de2008-04-28 02:14:02 -07005625 info->drop_rts_on_tx_done = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005626
5627 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
5628 usc_get_serial_signals( info );
5629 if ( !(info->serial_signals & SerialSignal_RTS) ) {
5630 info->serial_signals |= SerialSignal_RTS;
5631 usc_set_serial_signals( info );
Joe Perches0fab6de2008-04-28 02:14:02 -07005632 info->drop_rts_on_tx_done = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005633 }
5634 }
5635
5636
5637 if ( info->params.mode == MGSL_MODE_ASYNC ) {
5638 if ( !info->tx_active ) {
5639 usc_UnlatchTxstatusBits(info, TXSTATUS_ALL);
5640 usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA);
5641 usc_EnableInterrupts(info, TRANSMIT_DATA);
5642 usc_load_txfifo(info);
5643 }
5644 } else {
5645 /* Disable transmit DMA controller while programming. */
5646 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5647
5648 /* Transmit DMA buffer is loaded, so program USC */
5649 /* to send the frame contained in the buffers. */
5650
5651 FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc;
5652
5653 /* if operating in Raw sync mode, reset the rcc component
5654 * of the tx dma buffer entry, otherwise, the serial controller
5655 * will send a closing sync char after this count.
5656 */
5657 if ( info->params.mode == MGSL_MODE_RAW )
5658 info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0;
5659
5660 /* Program the Transmit Character Length Register (TCLR) */
5661 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
5662 usc_OutReg( info, TCLR, (u16)FrameSize );
5663
5664 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5665
5666 /* Program the address of the 1st DMA Buffer Entry in linked list */
5667 phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry;
5668 usc_OutDmaReg( info, NTARL, (u16)phys_addr );
5669 usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) );
5670
5671 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5672 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
5673 usc_EnableInterrupts( info, TRANSMIT_STATUS );
5674
5675 if ( info->params.mode == MGSL_MODE_RAW &&
5676 info->num_tx_dma_buffers > 1 ) {
5677 /* When running external sync mode, attempt to 'stream' transmit */
5678 /* by filling tx dma buffers as they become available. To do this */
5679 /* we need to enable Tx DMA EOB Status interrupts : */
5680 /* */
5681 /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */
5682 /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */
5683
5684 usc_OutDmaReg( info, TDIAR, BIT2|BIT3 );
5685 usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) );
5686 }
5687
5688 /* Initialize Transmit DMA Channel */
5689 usc_DmaCmd( info, DmaCmd_InitTxChannel );
5690
5691 usc_TCmd( info, TCmd_SendFrame );
5692
Jiri Slaby40565f12007-02-12 00:52:31 -08005693 mod_timer(&info->tx_timer, jiffies +
5694 msecs_to_jiffies(5000));
Linus Torvalds1da177e2005-04-16 15:20:36 -07005695 }
Joe Perches0fab6de2008-04-28 02:14:02 -07005696 info->tx_active = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005697 }
5698
5699 if ( !info->tx_enabled ) {
Joe Perches0fab6de2008-04-28 02:14:02 -07005700 info->tx_enabled = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005701 if ( info->params.flags & HDLC_FLAG_AUTO_CTS )
5702 usc_EnableTransmitter(info,ENABLE_AUTO_CTS);
5703 else
5704 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
5705 }
5706
5707} /* end of usc_start_transmitter() */
5708
5709/* usc_stop_transmitter()
5710 *
5711 * Stops the transmitter and DMA
5712 *
5713 * Arguments: info pointer to device isntance data
5714 * Return Value: None
5715 */
5716static void usc_stop_transmitter( struct mgsl_struct *info )
5717{
5718 if (debug_level >= DEBUG_LEVEL_ISR)
5719 printk("%s(%d):usc_stop_transmitter(%s)\n",
5720 __FILE__,__LINE__, info->device_name );
5721
5722 del_timer(&info->tx_timer);
5723
5724 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
5725 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5726 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
5727
5728 usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL);
5729 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
5730 usc_RTCmd( info, RTCmd_PurgeTxFifo );
5731
Joe Perches0fab6de2008-04-28 02:14:02 -07005732 info->tx_enabled = false;
5733 info->tx_active = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07005734
5735} /* end of usc_stop_transmitter() */
5736
5737/* usc_load_txfifo()
5738 *
5739 * Fill the transmit FIFO until the FIFO is full or
5740 * there is no more data to load.
5741 *
5742 * Arguments: info pointer to device extension (instance data)
5743 * Return Value: None
5744 */
5745static void usc_load_txfifo( struct mgsl_struct *info )
5746{
5747 int Fifocount;
5748 u8 TwoBytes[2];
5749
5750 if ( !info->xmit_cnt && !info->x_char )
5751 return;
5752
5753 /* Select transmit FIFO status readback in TICR */
5754 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
5755
5756 /* load the Transmit FIFO until FIFOs full or all data sent */
5757
5758 while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) {
5759 /* there is more space in the transmit FIFO and */
5760 /* there is more data in transmit buffer */
5761
5762 if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
5763 /* write a 16-bit word from transmit buffer to 16C32 */
5764
5765 TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
5766 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5767 TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
5768 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5769
5770 outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
5771
5772 info->xmit_cnt -= 2;
5773 info->icount.tx += 2;
5774 } else {
5775 /* only 1 byte left to transmit or 1 FIFO slot left */
5776
5777 outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
5778 info->io_base + CCAR );
5779
5780 if (info->x_char) {
5781 /* transmit pending high priority char */
5782 outw( info->x_char,info->io_base + CCAR );
5783 info->x_char = 0;
5784 } else {
5785 outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR );
5786 info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
5787 info->xmit_cnt--;
5788 }
5789 info->icount.tx++;
5790 }
5791 }
5792
5793} /* end of usc_load_txfifo() */
5794
5795/* usc_reset()
5796 *
5797 * Reset the adapter to a known state and prepare it for further use.
5798 *
5799 * Arguments: info pointer to device instance data
5800 * Return Value: None
5801 */
5802static void usc_reset( struct mgsl_struct *info )
5803{
5804 if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
5805 int i;
5806 u32 readval;
5807
5808 /* Set BIT30 of Misc Control Register */
5809 /* (Local Control Register 0x50) to force reset of USC. */
5810
5811 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5812 u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28);
5813
5814 info->misc_ctrl_value |= BIT30;
5815 *MiscCtrl = info->misc_ctrl_value;
5816
5817 /*
5818 * Force at least 170ns delay before clearing
5819 * reset bit. Each read from LCR takes at least
5820 * 30ns so 10 times for 300ns to be safe.
5821 */
5822 for(i=0;i<10;i++)
5823 readval = *MiscCtrl;
5824
5825 info->misc_ctrl_value &= ~BIT30;
5826 *MiscCtrl = info->misc_ctrl_value;
5827
5828 *LCR0BRDR = BUS_DESCRIPTOR(
5829 1, // Write Strobe Hold (0-3)
5830 2, // Write Strobe Delay (0-3)
5831 2, // Read Strobe Delay (0-3)
5832 0, // NWDD (Write data-data) (0-3)
5833 4, // NWAD (Write Addr-data) (0-31)
5834 0, // NXDA (Read/Write Data-Addr) (0-3)
5835 0, // NRDD (Read Data-Data) (0-3)
5836 5 // NRAD (Read Addr-Data) (0-31)
5837 );
5838 } else {
5839 /* do HW reset */
5840 outb( 0,info->io_base + 8 );
5841 }
5842
5843 info->mbre_bit = 0;
5844 info->loopback_bits = 0;
5845 info->usc_idle_mode = 0;
5846
5847 /*
5848 * Program the Bus Configuration Register (BCR)
5849 *
5850 * <15> 0 Don't use separate address
5851 * <14..6> 0 reserved
5852 * <5..4> 00 IAckmode = Default, don't care
5853 * <3> 1 Bus Request Totem Pole output
5854 * <2> 1 Use 16 Bit data bus
5855 * <1> 0 IRQ Totem Pole output
5856 * <0> 0 Don't Shift Right Addr
5857 *
5858 * 0000 0000 0000 1100 = 0x000c
5859 *
5860 * By writing to io_base + SDPIN the Wait/Ack pin is
5861 * programmed to work as a Wait pin.
5862 */
5863
5864 outw( 0x000c,info->io_base + SDPIN );
5865
5866
5867 outw( 0,info->io_base );
5868 outw( 0,info->io_base + CCAR );
5869
5870 /* select little endian byte ordering */
5871 usc_RTCmd( info, RTCmd_SelectLittleEndian );
5872
5873
5874 /* Port Control Register (PCR)
5875 *
5876 * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled)
5877 * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled)
5878 * <11..10> 00 Port 5 is Input (No Connect, Don't Care)
5879 * <9..8> 00 Port 4 is Input (No Connect, Don't Care)
5880 * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled )
5881 * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled )
5882 * <3..2> 01 Port 1 is Input (Dedicated RxC)
5883 * <1..0> 01 Port 0 is Input (Dedicated TxC)
5884 *
5885 * 1111 0000 1111 0101 = 0xf0f5
5886 */
5887
5888 usc_OutReg( info, PCR, 0xf0f5 );
5889
5890
5891 /*
5892 * Input/Output Control Register
5893 *
5894 * <15..14> 00 CTS is active low input
5895 * <13..12> 00 DCD is active low input
5896 * <11..10> 00 TxREQ pin is input (DSR)
5897 * <9..8> 00 RxREQ pin is input (RI)
5898 * <7..6> 00 TxD is output (Transmit Data)
5899 * <5..3> 000 TxC Pin in Input (14.7456MHz Clock)
5900 * <2..0> 100 RxC is Output (drive with BRG0)
5901 *
5902 * 0000 0000 0000 0100 = 0x0004
5903 */
5904
5905 usc_OutReg( info, IOCR, 0x0004 );
5906
5907} /* end of usc_reset() */
5908
5909/* usc_set_async_mode()
5910 *
5911 * Program adapter for asynchronous communications.
5912 *
5913 * Arguments: info pointer to device instance data
5914 * Return Value: None
5915 */
5916static void usc_set_async_mode( struct mgsl_struct *info )
5917{
5918 u16 RegValue;
5919
5920 /* disable interrupts while programming USC */
5921 usc_DisableMasterIrqBit( info );
5922
5923 outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */
5924 usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */
5925
5926 usc_loopback_frame( info );
5927
5928 /* Channel mode Register (CMR)
5929 *
5930 * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit
5931 * <13..12> 00 00 = 16X Clock
5932 * <11..8> 0000 Transmitter mode = Asynchronous
5933 * <7..6> 00 reserved?
5934 * <5..4> 00 Rx Sub modes, 00 = 16X Clock
5935 * <3..0> 0000 Receiver mode = Asynchronous
5936 *
5937 * 0000 0000 0000 0000 = 0x0
5938 */
5939
5940 RegValue = 0;
5941 if ( info->params.stop_bits != 1 )
5942 RegValue |= BIT14;
5943 usc_OutReg( info, CMR, RegValue );
5944
5945
5946 /* Receiver mode Register (RMR)
5947 *
5948 * <15..13> 000 encoding = None
5949 * <12..08> 00000 reserved (Sync Only)
5950 * <7..6> 00 Even parity
5951 * <5> 0 parity disabled
5952 * <4..2> 000 Receive Char Length = 8 bits
5953 * <1..0> 00 Disable Receiver
5954 *
5955 * 0000 0000 0000 0000 = 0x0
5956 */
5957
5958 RegValue = 0;
5959
5960 if ( info->params.data_bits != 8 )
5961 RegValue |= BIT4+BIT3+BIT2;
5962
5963 if ( info->params.parity != ASYNC_PARITY_NONE ) {
5964 RegValue |= BIT5;
5965 if ( info->params.parity != ASYNC_PARITY_ODD )
5966 RegValue |= BIT6;
5967 }
5968
5969 usc_OutReg( info, RMR, RegValue );
5970
5971
5972 /* Set IRQ trigger level */
5973
5974 usc_RCmd( info, RCmd_SelectRicrIntLevel );
5975
5976
5977 /* Receive Interrupt Control Register (RICR)
5978 *
5979 * <15..8> ? RxFIFO IRQ Request Level
5980 *
5981 * Note: For async mode the receive FIFO level must be set
Alexey Dobriyan7f927fc2006-03-28 01:56:53 -08005982 * to 0 to avoid the situation where the FIFO contains fewer bytes
Linus Torvalds1da177e2005-04-16 15:20:36 -07005983 * than the trigger level and no more data is expected.
5984 *
5985 * <7> 0 Exited Hunt IA (Interrupt Arm)
5986 * <6> 0 Idle Received IA
5987 * <5> 0 Break/Abort IA
5988 * <4> 0 Rx Bound IA
5989 * <3> 0 Queued status reflects oldest byte in FIFO
5990 * <2> 0 Abort/PE IA
5991 * <1> 0 Rx Overrun IA
5992 * <0> 0 Select TC0 value for readback
5993 *
5994 * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
5995 */
5996
5997 usc_OutReg( info, RICR, 0x0000 );
5998
5999 usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
6000 usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
6001
6002
6003 /* Transmit mode Register (TMR)
6004 *
6005 * <15..13> 000 encoding = None
6006 * <12..08> 00000 reserved (Sync Only)
6007 * <7..6> 00 Transmit parity Even
6008 * <5> 0 Transmit parity Disabled
6009 * <4..2> 000 Tx Char Length = 8 bits
6010 * <1..0> 00 Disable Transmitter
6011 *
6012 * 0000 0000 0000 0000 = 0x0
6013 */
6014
6015 RegValue = 0;
6016
6017 if ( info->params.data_bits != 8 )
6018 RegValue |= BIT4+BIT3+BIT2;
6019
6020 if ( info->params.parity != ASYNC_PARITY_NONE ) {
6021 RegValue |= BIT5;
6022 if ( info->params.parity != ASYNC_PARITY_ODD )
6023 RegValue |= BIT6;
6024 }
6025
6026 usc_OutReg( info, TMR, RegValue );
6027
6028 usc_set_txidle( info );
6029
6030
6031 /* Set IRQ trigger level */
6032
6033 usc_TCmd( info, TCmd_SelectTicrIntLevel );
6034
6035
6036 /* Transmit Interrupt Control Register (TICR)
6037 *
6038 * <15..8> ? Transmit FIFO IRQ Level
6039 * <7> 0 Present IA (Interrupt Arm)
6040 * <6> 1 Idle Sent IA
6041 * <5> 0 Abort Sent IA
6042 * <4> 0 EOF/EOM Sent IA
6043 * <3> 0 CRC Sent IA
6044 * <2> 0 1 = Wait for SW Trigger to Start Frame
6045 * <1> 0 Tx Underrun IA
6046 * <0> 0 TC0 constant on read back
6047 *
6048 * 0000 0000 0100 0000 = 0x0040
6049 */
6050
6051 usc_OutReg( info, TICR, 0x1f40 );
6052
6053 usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
6054 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
6055
6056 usc_enable_async_clock( info, info->params.data_rate );
6057
6058
6059 /* Channel Control/status Register (CCSR)
6060 *
6061 * <15> X RCC FIFO Overflow status (RO)
6062 * <14> X RCC FIFO Not Empty status (RO)
6063 * <13> 0 1 = Clear RCC FIFO (WO)
6064 * <12> X DPLL in Sync status (RO)
6065 * <11> X DPLL 2 Missed Clocks status (RO)
6066 * <10> X DPLL 1 Missed Clock status (RO)
6067 * <9..8> 00 DPLL Resync on rising and falling edges (RW)
6068 * <7> X SDLC Loop On status (RO)
6069 * <6> X SDLC Loop Send status (RO)
6070 * <5> 1 Bypass counters for TxClk and RxClk (RW)
6071 * <4..2> 000 Last Char of SDLC frame has 8 bits (RW)
6072 * <1..0> 00 reserved
6073 *
6074 * 0000 0000 0010 0000 = 0x0020
6075 */
6076
6077 usc_OutReg( info, CCSR, 0x0020 );
6078
6079 usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6080 RECEIVE_DATA + RECEIVE_STATUS );
6081
6082 usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA +
6083 RECEIVE_DATA + RECEIVE_STATUS );
6084
6085 usc_EnableMasterIrqBit( info );
6086
6087 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6088 /* Enable INTEN (Port 6, Bit12) */
6089 /* This connects the IRQ request signal to the ISA bus */
6090 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6091 }
6092
Paul Fulghum7c1fff52005-09-09 13:02:14 -07006093 if (info->params.loopback) {
6094 info->loopback_bits = 0x300;
6095 outw(0x0300, info->io_base + CCAR);
6096 }
6097
Linus Torvalds1da177e2005-04-16 15:20:36 -07006098} /* end of usc_set_async_mode() */
6099
6100/* usc_loopback_frame()
6101 *
6102 * Loop back a small (2 byte) dummy SDLC frame.
6103 * Interrupts and DMA are NOT used. The purpose of this is to
6104 * clear any 'stale' status info left over from running in async mode.
6105 *
6106 * The 16C32 shows the strange behaviour of marking the 1st
6107 * received SDLC frame with a CRC error even when there is no
6108 * CRC error. To get around this a small dummy from of 2 bytes
6109 * is looped back when switching from async to sync mode.
6110 *
6111 * Arguments: info pointer to device instance data
6112 * Return Value: None
6113 */
6114static void usc_loopback_frame( struct mgsl_struct *info )
6115{
6116 int i;
6117 unsigned long oldmode = info->params.mode;
6118
6119 info->params.mode = MGSL_MODE_HDLC;
6120
6121 usc_DisableMasterIrqBit( info );
6122
6123 usc_set_sdlc_mode( info );
6124 usc_enable_loopback( info, 1 );
6125
6126 /* Write 16-bit Time Constant for BRG0 */
6127 usc_OutReg( info, TC0R, 0 );
6128
6129 /* Channel Control Register (CCR)
6130 *
6131 * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs)
6132 * <13> 0 Trigger Tx on SW Command Disabled
6133 * <12> 0 Flag Preamble Disabled
6134 * <11..10> 00 Preamble Length = 8-Bits
6135 * <9..8> 01 Preamble Pattern = flags
6136 * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs)
6137 * <5> 0 Trigger Rx on SW Command Disabled
6138 * <4..0> 0 reserved
6139 *
6140 * 0000 0001 0000 0000 = 0x0100
6141 */
6142
6143 usc_OutReg( info, CCR, 0x0100 );
6144
6145 /* SETUP RECEIVER */
6146 usc_RTCmd( info, RTCmd_PurgeRxFifo );
6147 usc_EnableReceiver(info,ENABLE_UNCONDITIONAL);
6148
6149 /* SETUP TRANSMITTER */
6150 /* Program the Transmit Character Length Register (TCLR) */
6151 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
6152 usc_OutReg( info, TCLR, 2 );
6153 usc_RTCmd( info, RTCmd_PurgeTxFifo );
6154
6155 /* unlatch Tx status bits, and start transmit channel. */
6156 usc_UnlatchTxstatusBits(info,TXSTATUS_ALL);
6157 outw(0,info->io_base + DATAREG);
6158
6159 /* ENABLE TRANSMITTER */
6160 usc_TCmd( info, TCmd_SendFrame );
6161 usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
6162
6163 /* WAIT FOR RECEIVE COMPLETE */
6164 for (i=0 ; i<1000 ; i++)
6165 if (usc_InReg( info, RCSR ) & (BIT8 + BIT4 + BIT3 + BIT1))
6166 break;
6167
6168 /* clear Internal Data loopback mode */
6169 usc_enable_loopback(info, 0);
6170
6171 usc_EnableMasterIrqBit(info);
6172
6173 info->params.mode = oldmode;
6174
6175} /* end of usc_loopback_frame() */
6176
6177/* usc_set_sync_mode() Programs the USC for SDLC communications.
6178 *
6179 * Arguments: info pointer to adapter info structure
6180 * Return Value: None
6181 */
6182static void usc_set_sync_mode( struct mgsl_struct *info )
6183{
6184 usc_loopback_frame( info );
6185 usc_set_sdlc_mode( info );
6186
6187 if (info->bus_type == MGSL_BUS_TYPE_ISA) {
6188 /* Enable INTEN (Port 6, Bit12) */
6189 /* This connects the IRQ request signal to the ISA bus */
6190 usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12));
6191 }
6192
6193 usc_enable_aux_clock(info, info->params.clock_speed);
6194
6195 if (info->params.loopback)
6196 usc_enable_loopback(info,1);
6197
6198} /* end of mgsl_set_sync_mode() */
6199
6200/* usc_set_txidle() Set the HDLC idle mode for the transmitter.
6201 *
6202 * Arguments: info pointer to device instance data
6203 * Return Value: None
6204 */
6205static void usc_set_txidle( struct mgsl_struct *info )
6206{
6207 u16 usc_idle_mode = IDLEMODE_FLAGS;
6208
6209 /* Map API idle mode to USC register bits */
6210
6211 switch( info->idle_mode ){
6212 case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break;
6213 case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break;
6214 case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break;
6215 case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break;
6216 case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break;
6217 case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break;
6218 case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break;
6219 }
6220
6221 info->usc_idle_mode = usc_idle_mode;
6222 //usc_OutReg(info, TCSR, usc_idle_mode);
6223 info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */
6224 info->tcsr_value += usc_idle_mode;
6225 usc_OutReg(info, TCSR, info->tcsr_value);
6226
6227 /*
6228 * if SyncLink WAN adapter is running in external sync mode, the
6229 * transmitter has been set to Monosync in order to try to mimic
6230 * a true raw outbound bit stream. Monosync still sends an open/close
6231 * sync char at the start/end of a frame. Try to match those sync
6232 * patterns to the idle mode set here
6233 */
6234 if ( info->params.mode == MGSL_MODE_RAW ) {
6235 unsigned char syncpat = 0;
6236 switch( info->idle_mode ) {
6237 case HDLC_TXIDLE_FLAGS:
6238 syncpat = 0x7e;
6239 break;
6240 case HDLC_TXIDLE_ALT_ZEROS_ONES:
6241 syncpat = 0x55;
6242 break;
6243 case HDLC_TXIDLE_ZEROS:
6244 case HDLC_TXIDLE_SPACE:
6245 syncpat = 0x00;
6246 break;
6247 case HDLC_TXIDLE_ONES:
6248 case HDLC_TXIDLE_MARK:
6249 syncpat = 0xff;
6250 break;
6251 case HDLC_TXIDLE_ALT_MARK_SPACE:
6252 syncpat = 0xaa;
6253 break;
6254 }
6255
6256 usc_SetTransmitSyncChars(info,syncpat,syncpat);
6257 }
6258
6259} /* end of usc_set_txidle() */
6260
6261/* usc_get_serial_signals()
6262 *
6263 * Query the adapter for the state of the V24 status (input) signals.
6264 *
6265 * Arguments: info pointer to device instance data
6266 * Return Value: None
6267 */
6268static void usc_get_serial_signals( struct mgsl_struct *info )
6269{
6270 u16 status;
6271
6272 /* clear all serial signals except DTR and RTS */
6273 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
6274
6275 /* Read the Misc Interrupt status Register (MISR) to get */
6276 /* the V24 status signals. */
6277
6278 status = usc_InReg( info, MISR );
6279
6280 /* set serial signal bits to reflect MISR */
6281
6282 if ( status & MISCSTATUS_CTS )
6283 info->serial_signals |= SerialSignal_CTS;
6284
6285 if ( status & MISCSTATUS_DCD )
6286 info->serial_signals |= SerialSignal_DCD;
6287
6288 if ( status & MISCSTATUS_RI )
6289 info->serial_signals |= SerialSignal_RI;
6290
6291 if ( status & MISCSTATUS_DSR )
6292 info->serial_signals |= SerialSignal_DSR;
6293
6294} /* end of usc_get_serial_signals() */
6295
6296/* usc_set_serial_signals()
6297 *
6298 * Set the state of DTR and RTS based on contents of
6299 * serial_signals member of device extension.
6300 *
6301 * Arguments: info pointer to device instance data
6302 * Return Value: None
6303 */
6304static void usc_set_serial_signals( struct mgsl_struct *info )
6305{
6306 u16 Control;
6307 unsigned char V24Out = info->serial_signals;
6308
6309 /* get the current value of the Port Control Register (PCR) */
6310
6311 Control = usc_InReg( info, PCR );
6312
6313 if ( V24Out & SerialSignal_RTS )
6314 Control &= ~(BIT6);
6315 else
6316 Control |= BIT6;
6317
6318 if ( V24Out & SerialSignal_DTR )
6319 Control &= ~(BIT4);
6320 else
6321 Control |= BIT4;
6322
6323 usc_OutReg( info, PCR, Control );
6324
6325} /* end of usc_set_serial_signals() */
6326
6327/* usc_enable_async_clock()
6328 *
6329 * Enable the async clock at the specified frequency.
6330 *
6331 * Arguments: info pointer to device instance data
6332 * data_rate data rate of clock in bps
6333 * 0 disables the AUX clock.
6334 * Return Value: None
6335 */
6336static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
6337{
6338 if ( data_rate ) {
6339 /*
6340 * Clock mode Control Register (CMCR)
6341 *
6342 * <15..14> 00 counter 1 Disabled
6343 * <13..12> 00 counter 0 Disabled
6344 * <11..10> 11 BRG1 Input is TxC Pin
6345 * <9..8> 11 BRG0 Input is TxC Pin
6346 * <7..6> 01 DPLL Input is BRG1 Output
6347 * <5..3> 100 TxCLK comes from BRG0
6348 * <2..0> 100 RxCLK comes from BRG0
6349 *
6350 * 0000 1111 0110 0100 = 0x0f64
6351 */
6352
6353 usc_OutReg( info, CMCR, 0x0f64 );
6354
6355
6356 /*
6357 * Write 16-bit Time Constant for BRG0
6358 * Time Constant = (ClkSpeed / data_rate) - 1
6359 * ClkSpeed = 921600 (ISA), 691200 (PCI)
6360 */
6361
6362 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6363 usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) );
6364 else
6365 usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) );
6366
6367
6368 /*
6369 * Hardware Configuration Register (HCR)
6370 * Clear Bit 1, BRG0 mode = Continuous
6371 * Set Bit 0 to enable BRG0.
6372 */
6373
6374 usc_OutReg( info, HCR,
6375 (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) );
6376
6377
6378 /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */
6379
6380 usc_OutReg( info, IOCR,
6381 (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) );
6382 } else {
6383 /* data rate == 0 so turn off BRG0 */
6384 usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) );
6385 }
6386
6387} /* end of usc_enable_async_clock() */
6388
6389/*
6390 * Buffer Structures:
6391 *
6392 * Normal memory access uses virtual addresses that can make discontiguous
6393 * physical memory pages appear to be contiguous in the virtual address
6394 * space (the processors memory mapping handles the conversions).
6395 *
6396 * DMA transfers require physically contiguous memory. This is because
6397 * the DMA system controller and DMA bus masters deal with memory using
6398 * only physical addresses.
6399 *
6400 * This causes a problem under Windows NT when large DMA buffers are
6401 * needed. Fragmentation of the nonpaged pool prevents allocations of
6402 * physically contiguous buffers larger than the PAGE_SIZE.
6403 *
6404 * However the 16C32 supports Bus Master Scatter/Gather DMA which
6405 * allows DMA transfers to physically discontiguous buffers. Information
6406 * about each data transfer buffer is contained in a memory structure
6407 * called a 'buffer entry'. A list of buffer entries is maintained
6408 * to track and control the use of the data transfer buffers.
6409 *
6410 * To support this strategy we will allocate sufficient PAGE_SIZE
6411 * contiguous memory buffers to allow for the total required buffer
6412 * space.
6413 *
6414 * The 16C32 accesses the list of buffer entries using Bus Master
6415 * DMA. Control information is read from the buffer entries by the
6416 * 16C32 to control data transfers. status information is written to
6417 * the buffer entries by the 16C32 to indicate the status of completed
6418 * transfers.
6419 *
6420 * The CPU writes control information to the buffer entries to control
6421 * the 16C32 and reads status information from the buffer entries to
6422 * determine information about received and transmitted frames.
6423 *
6424 * Because the CPU and 16C32 (adapter) both need simultaneous access
6425 * to the buffer entries, the buffer entry memory is allocated with
6426 * HalAllocateCommonBuffer(). This restricts the size of the buffer
6427 * entry list to PAGE_SIZE.
6428 *
6429 * The actual data buffers on the other hand will only be accessed
6430 * by the CPU or the adapter but not by both simultaneously. This allows
6431 * Scatter/Gather packet based DMA procedures for using physically
6432 * discontiguous pages.
6433 */
6434
6435/*
6436 * mgsl_reset_tx_dma_buffers()
6437 *
6438 * Set the count for all transmit buffers to 0 to indicate the
6439 * buffer is available for use and set the current buffer to the
6440 * first buffer. This effectively makes all buffers free and
6441 * discards any data in buffers.
6442 *
6443 * Arguments: info pointer to device instance data
6444 * Return Value: None
6445 */
6446static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info )
6447{
6448 unsigned int i;
6449
6450 for ( i = 0; i < info->tx_buffer_count; i++ ) {
6451 *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0;
6452 }
6453
6454 info->current_tx_buffer = 0;
6455 info->start_tx_dma_buffer = 0;
6456 info->tx_dma_buffers_used = 0;
6457
6458 info->get_tx_holding_index = 0;
6459 info->put_tx_holding_index = 0;
6460 info->tx_holding_count = 0;
6461
6462} /* end of mgsl_reset_tx_dma_buffers() */
6463
6464/*
6465 * num_free_tx_dma_buffers()
6466 *
6467 * returns the number of free tx dma buffers available
6468 *
6469 * Arguments: info pointer to device instance data
6470 * Return Value: number of free tx dma buffers
6471 */
6472static int num_free_tx_dma_buffers(struct mgsl_struct *info)
6473{
6474 return info->tx_buffer_count - info->tx_dma_buffers_used;
6475}
6476
6477/*
6478 * mgsl_reset_rx_dma_buffers()
6479 *
6480 * Set the count for all receive buffers to DMABUFFERSIZE
6481 * and set the current buffer to the first buffer. This effectively
6482 * makes all buffers free and discards any data in buffers.
6483 *
6484 * Arguments: info pointer to device instance data
6485 * Return Value: None
6486 */
6487static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )
6488{
6489 unsigned int i;
6490
6491 for ( i = 0; i < info->rx_buffer_count; i++ ) {
6492 *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE;
6493// info->rx_buffer_list[i].count = DMABUFFERSIZE;
6494// info->rx_buffer_list[i].status = 0;
6495 }
6496
6497 info->current_rx_buffer = 0;
6498
6499} /* end of mgsl_reset_rx_dma_buffers() */
6500
6501/*
6502 * mgsl_free_rx_frame_buffers()
6503 *
6504 * Free the receive buffers used by a received SDLC
6505 * frame such that the buffers can be reused.
6506 *
6507 * Arguments:
6508 *
6509 * info pointer to device instance data
6510 * StartIndex index of 1st receive buffer of frame
6511 * EndIndex index of last receive buffer of frame
6512 *
6513 * Return Value: None
6514 */
6515static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
6516{
Joe Perches0fab6de2008-04-28 02:14:02 -07006517 bool Done = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006518 DMABUFFERENTRY *pBufEntry;
6519 unsigned int Index;
6520
6521 /* Starting with 1st buffer entry of the frame clear the status */
6522 /* field and set the count field to DMA Buffer Size. */
6523
6524 Index = StartIndex;
6525
6526 while( !Done ) {
6527 pBufEntry = &(info->rx_buffer_list[Index]);
6528
6529 if ( Index == EndIndex ) {
6530 /* This is the last buffer of the frame! */
Joe Perches0fab6de2008-04-28 02:14:02 -07006531 Done = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006532 }
6533
6534 /* reset current buffer for reuse */
6535// pBufEntry->status = 0;
6536// pBufEntry->count = DMABUFFERSIZE;
6537 *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE;
6538
6539 /* advance to next buffer entry in linked list */
6540 Index++;
6541 if ( Index == info->rx_buffer_count )
6542 Index = 0;
6543 }
6544
6545 /* set current buffer to next buffer after last buffer of frame */
6546 info->current_rx_buffer = Index;
6547
6548} /* end of free_rx_frame_buffers() */
6549
6550/* mgsl_get_rx_frame()
6551 *
6552 * This function attempts to return a received SDLC frame from the
6553 * receive DMA buffers. Only frames received without errors are returned.
6554 *
6555 * Arguments: info pointer to device extension
Joe Perches0fab6de2008-04-28 02:14:02 -07006556 * Return Value: true if frame returned, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07006557 */
Joe Perches0fab6de2008-04-28 02:14:02 -07006558static bool mgsl_get_rx_frame(struct mgsl_struct *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -07006559{
6560 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
6561 unsigned short status;
6562 DMABUFFERENTRY *pBufEntry;
6563 unsigned int framesize = 0;
Joe Perches0fab6de2008-04-28 02:14:02 -07006564 bool ReturnCode = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006565 unsigned long flags;
Alan Cox8fb06c72008-07-16 21:56:46 +01006566 struct tty_struct *tty = info->port.tty;
Joe Perches0fab6de2008-04-28 02:14:02 -07006567 bool return_frame = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006568
6569 /*
6570 * current_rx_buffer points to the 1st buffer of the next available
6571 * receive frame. To find the last buffer of the frame look for
6572 * a non-zero status field in the buffer entries. (The status
6573 * field is set by the 16C32 after completing a receive frame.
6574 */
6575
6576 StartIndex = EndIndex = info->current_rx_buffer;
6577
6578 while( !info->rx_buffer_list[EndIndex].status ) {
6579 /*
6580 * If the count field of the buffer entry is non-zero then
6581 * this buffer has not been used. (The 16C32 clears the count
6582 * field when it starts using the buffer.) If an unused buffer
6583 * is encountered then there are no frames available.
6584 */
6585
6586 if ( info->rx_buffer_list[EndIndex].count )
6587 goto Cleanup;
6588
6589 /* advance to next buffer entry in linked list */
6590 EndIndex++;
6591 if ( EndIndex == info->rx_buffer_count )
6592 EndIndex = 0;
6593
6594 /* if entire list searched then no frame available */
6595 if ( EndIndex == StartIndex ) {
6596 /* If this occurs then something bad happened,
6597 * all buffers have been 'used' but none mark
6598 * the end of a frame. Reset buffers and receiver.
6599 */
6600
6601 if ( info->rx_enabled ){
6602 spin_lock_irqsave(&info->irq_spinlock,flags);
6603 usc_start_receiver(info);
6604 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6605 }
6606 goto Cleanup;
6607 }
6608 }
6609
6610
6611 /* check status of receive frame */
6612
6613 status = info->rx_buffer_list[EndIndex].status;
6614
6615 if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
6616 RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
6617 if ( status & RXSTATUS_SHORT_FRAME )
6618 info->icount.rxshort++;
6619 else if ( status & RXSTATUS_ABORT )
6620 info->icount.rxabort++;
6621 else if ( status & RXSTATUS_OVERRUN )
6622 info->icount.rxover++;
6623 else {
6624 info->icount.rxcrc++;
6625 if ( info->params.crc_type & HDLC_CRC_RETURN_EX )
Joe Perches0fab6de2008-04-28 02:14:02 -07006626 return_frame = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006627 }
6628 framesize = 0;
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08006629#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07006630 {
Krzysztof Halasa198191c2008-06-30 23:26:53 +02006631 info->netdev->stats.rx_errors++;
6632 info->netdev->stats.rx_frame_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006633 }
6634#endif
6635 } else
Joe Perches0fab6de2008-04-28 02:14:02 -07006636 return_frame = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006637
6638 if ( return_frame ) {
6639 /* receive frame has no errors, get frame size.
6640 * The frame size is the starting value of the RCC (which was
6641 * set to 0xffff) minus the ending value of the RCC (decremented
6642 * once for each receive character) minus 2 for the 16-bit CRC.
6643 */
6644
6645 framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc;
6646
6647 /* adjust frame size for CRC if any */
6648 if ( info->params.crc_type == HDLC_CRC_16_CCITT )
6649 framesize -= 2;
6650 else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
6651 framesize -= 4;
6652 }
6653
6654 if ( debug_level >= DEBUG_LEVEL_BH )
6655 printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
6656 __FILE__,__LINE__,info->device_name,status,framesize);
6657
6658 if ( debug_level >= DEBUG_LEVEL_DATA )
6659 mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
6660 min_t(int, framesize, DMABUFFERSIZE),0);
6661
6662 if (framesize) {
6663 if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
6664 ((framesize+1) > info->max_frame_size) ) ||
6665 (framesize > info->max_frame_size) )
6666 info->icount.rxlong++;
6667 else {
6668 /* copy dma buffer(s) to contiguous intermediate buffer */
6669 int copy_count = framesize;
6670 int index = StartIndex;
6671 unsigned char *ptmp = info->intermediate_rxbuffer;
6672
6673 if ( !(status & RXSTATUS_CRC_ERROR))
6674 info->icount.rxok++;
6675
6676 while(copy_count) {
6677 int partial_count;
6678 if ( copy_count > DMABUFFERSIZE )
6679 partial_count = DMABUFFERSIZE;
6680 else
6681 partial_count = copy_count;
6682
6683 pBufEntry = &(info->rx_buffer_list[index]);
6684 memcpy( ptmp, pBufEntry->virt_addr, partial_count );
6685 ptmp += partial_count;
6686 copy_count -= partial_count;
6687
6688 if ( ++index == info->rx_buffer_count )
6689 index = 0;
6690 }
6691
6692 if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) {
6693 ++framesize;
6694 *ptmp = (status & RXSTATUS_CRC_ERROR ?
6695 RX_CRC_ERROR :
6696 RX_OK);
6697
6698 if ( debug_level >= DEBUG_LEVEL_DATA )
6699 printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n",
6700 __FILE__,__LINE__,info->device_name,
6701 *ptmp);
6702 }
6703
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08006704#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07006705 if (info->netcount)
6706 hdlcdev_rx(info,info->intermediate_rxbuffer,framesize);
6707 else
6708#endif
6709 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6710 }
6711 }
6712 /* Free the buffers used by this frame. */
6713 mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex );
6714
Joe Perches0fab6de2008-04-28 02:14:02 -07006715 ReturnCode = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006716
6717Cleanup:
6718
6719 if ( info->rx_enabled && info->rx_overflow ) {
6720 /* The receiver needs to restarted because of
6721 * a receive overflow (buffer or FIFO). If the
6722 * receive buffers are now empty, then restart receiver.
6723 */
6724
6725 if ( !info->rx_buffer_list[EndIndex].status &&
6726 info->rx_buffer_list[EndIndex].count ) {
6727 spin_lock_irqsave(&info->irq_spinlock,flags);
6728 usc_start_receiver(info);
6729 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6730 }
6731 }
6732
6733 return ReturnCode;
6734
6735} /* end of mgsl_get_rx_frame() */
6736
6737/* mgsl_get_raw_rx_frame()
6738 *
6739 * This function attempts to return a received frame from the
6740 * receive DMA buffers when running in external loop mode. In this mode,
6741 * we will return at most one DMABUFFERSIZE frame to the application.
6742 * The USC receiver is triggering off of DCD going active to start a new
6743 * frame, and DCD going inactive to terminate the frame (similar to
6744 * processing a closing flag character).
6745 *
6746 * In this routine, we will return DMABUFFERSIZE "chunks" at a time.
6747 * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero
6748 * status field and the RCC field will indicate the length of the
6749 * entire received frame. We take this RCC field and get the modulus
6750 * of RCC and DMABUFFERSIZE to determine if number of bytes in the
6751 * last Rx DMA buffer and return that last portion of the frame.
6752 *
6753 * Arguments: info pointer to device extension
Joe Perches0fab6de2008-04-28 02:14:02 -07006754 * Return Value: true if frame returned, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07006755 */
Joe Perches0fab6de2008-04-28 02:14:02 -07006756static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -07006757{
6758 unsigned int CurrentIndex, NextIndex;
6759 unsigned short status;
6760 DMABUFFERENTRY *pBufEntry;
6761 unsigned int framesize = 0;
Joe Perches0fab6de2008-04-28 02:14:02 -07006762 bool ReturnCode = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006763 unsigned long flags;
Alan Cox8fb06c72008-07-16 21:56:46 +01006764 struct tty_struct *tty = info->port.tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006765
6766 /*
6767 * current_rx_buffer points to the 1st buffer of the next available
6768 * receive frame. The status field is set by the 16C32 after
6769 * completing a receive frame. If the status field of this buffer
6770 * is zero, either the USC is still filling this buffer or this
6771 * is one of a series of buffers making up a received frame.
6772 *
6773 * If the count field of this buffer is zero, the USC is either
6774 * using this buffer or has used this buffer. Look at the count
6775 * field of the next buffer. If that next buffer's count is
6776 * non-zero, the USC is still actively using the current buffer.
6777 * Otherwise, if the next buffer's count field is zero, the
6778 * current buffer is complete and the USC is using the next
6779 * buffer.
6780 */
6781 CurrentIndex = NextIndex = info->current_rx_buffer;
6782 ++NextIndex;
6783 if ( NextIndex == info->rx_buffer_count )
6784 NextIndex = 0;
6785
6786 if ( info->rx_buffer_list[CurrentIndex].status != 0 ||
6787 (info->rx_buffer_list[CurrentIndex].count == 0 &&
6788 info->rx_buffer_list[NextIndex].count == 0)) {
6789 /*
6790 * Either the status field of this dma buffer is non-zero
6791 * (indicating the last buffer of a receive frame) or the next
6792 * buffer is marked as in use -- implying this buffer is complete
6793 * and an intermediate buffer for this received frame.
6794 */
6795
6796 status = info->rx_buffer_list[CurrentIndex].status;
6797
6798 if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN +
6799 RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) {
6800 if ( status & RXSTATUS_SHORT_FRAME )
6801 info->icount.rxshort++;
6802 else if ( status & RXSTATUS_ABORT )
6803 info->icount.rxabort++;
6804 else if ( status & RXSTATUS_OVERRUN )
6805 info->icount.rxover++;
6806 else
6807 info->icount.rxcrc++;
6808 framesize = 0;
6809 } else {
6810 /*
6811 * A receive frame is available, get frame size and status.
6812 *
6813 * The frame size is the starting value of the RCC (which was
6814 * set to 0xffff) minus the ending value of the RCC (decremented
6815 * once for each receive character) minus 2 or 4 for the 16-bit
6816 * or 32-bit CRC.
6817 *
6818 * If the status field is zero, this is an intermediate buffer.
6819 * It's size is 4K.
6820 *
6821 * If the DMA Buffer Entry's Status field is non-zero, the
6822 * receive operation completed normally (ie: DCD dropped). The
6823 * RCC field is valid and holds the received frame size.
6824 * It is possible that the RCC field will be zero on a DMA buffer
6825 * entry with a non-zero status. This can occur if the total
6826 * frame size (number of bytes between the time DCD goes active
6827 * to the time DCD goes inactive) exceeds 65535 bytes. In this
6828 * case the 16C32 has underrun on the RCC count and appears to
6829 * stop updating this counter to let us know the actual received
6830 * frame size. If this happens (non-zero status and zero RCC),
6831 * simply return the entire RxDMA Buffer
6832 */
6833 if ( status ) {
6834 /*
6835 * In the event that the final RxDMA Buffer is
6836 * terminated with a non-zero status and the RCC
6837 * field is zero, we interpret this as the RCC
6838 * having underflowed (received frame > 65535 bytes).
6839 *
6840 * Signal the event to the user by passing back
6841 * a status of RxStatus_CrcError returning the full
6842 * buffer and let the app figure out what data is
6843 * actually valid
6844 */
6845 if ( info->rx_buffer_list[CurrentIndex].rcc )
6846 framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc;
6847 else
6848 framesize = DMABUFFERSIZE;
6849 }
6850 else
6851 framesize = DMABUFFERSIZE;
6852 }
6853
6854 if ( framesize > DMABUFFERSIZE ) {
6855 /*
6856 * if running in raw sync mode, ISR handler for
6857 * End Of Buffer events terminates all buffers at 4K.
6858 * If this frame size is said to be >4K, get the
6859 * actual number of bytes of the frame in this buffer.
6860 */
6861 framesize = framesize % DMABUFFERSIZE;
6862 }
6863
6864
6865 if ( debug_level >= DEBUG_LEVEL_BH )
6866 printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n",
6867 __FILE__,__LINE__,info->device_name,status,framesize);
6868
6869 if ( debug_level >= DEBUG_LEVEL_DATA )
6870 mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr,
6871 min_t(int, framesize, DMABUFFERSIZE),0);
6872
6873 if (framesize) {
6874 /* copy dma buffer(s) to contiguous intermediate buffer */
6875 /* NOTE: we never copy more than DMABUFFERSIZE bytes */
6876
6877 pBufEntry = &(info->rx_buffer_list[CurrentIndex]);
6878 memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize);
6879 info->icount.rxok++;
6880
6881 ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize);
6882 }
6883
6884 /* Free the buffers used by this frame. */
6885 mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex );
6886
Joe Perches0fab6de2008-04-28 02:14:02 -07006887 ReturnCode = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07006888 }
6889
6890
6891 if ( info->rx_enabled && info->rx_overflow ) {
6892 /* The receiver needs to restarted because of
6893 * a receive overflow (buffer or FIFO). If the
6894 * receive buffers are now empty, then restart receiver.
6895 */
6896
6897 if ( !info->rx_buffer_list[CurrentIndex].status &&
6898 info->rx_buffer_list[CurrentIndex].count ) {
6899 spin_lock_irqsave(&info->irq_spinlock,flags);
6900 usc_start_receiver(info);
6901 spin_unlock_irqrestore(&info->irq_spinlock,flags);
6902 }
6903 }
6904
6905 return ReturnCode;
6906
6907} /* end of mgsl_get_raw_rx_frame() */
6908
6909/* mgsl_load_tx_dma_buffer()
6910 *
6911 * Load the transmit DMA buffer with the specified data.
6912 *
6913 * Arguments:
6914 *
6915 * info pointer to device extension
6916 * Buffer pointer to buffer containing frame to load
6917 * BufferSize size in bytes of frame in Buffer
6918 *
6919 * Return Value: None
6920 */
6921static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
6922 const char *Buffer, unsigned int BufferSize)
6923{
6924 unsigned short Copycount;
6925 unsigned int i = 0;
6926 DMABUFFERENTRY *pBufEntry;
6927
6928 if ( debug_level >= DEBUG_LEVEL_DATA )
6929 mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
6930
6931 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
6932 /* set CMR:13 to start transmit when
6933 * next GoAhead (abort) is received
6934 */
6935 info->cmr_value |= BIT13;
6936 }
6937
6938 /* begin loading the frame in the next available tx dma
6939 * buffer, remember it's starting location for setting
6940 * up tx dma operation
6941 */
6942 i = info->current_tx_buffer;
6943 info->start_tx_dma_buffer = i;
6944
6945 /* Setup the status and RCC (Frame Size) fields of the 1st */
6946 /* buffer entry in the transmit DMA buffer list. */
6947
6948 info->tx_buffer_list[i].status = info->cmr_value & 0xf000;
6949 info->tx_buffer_list[i].rcc = BufferSize;
6950 info->tx_buffer_list[i].count = BufferSize;
6951
6952 /* Copy frame data from 1st source buffer to the DMA buffers. */
6953 /* The frame data may span multiple DMA buffers. */
6954
6955 while( BufferSize ){
6956 /* Get a pointer to next DMA buffer entry. */
6957 pBufEntry = &info->tx_buffer_list[i++];
6958
6959 if ( i == info->tx_buffer_count )
6960 i=0;
6961
6962 /* Calculate the number of bytes that can be copied from */
6963 /* the source buffer to this DMA buffer. */
6964 if ( BufferSize > DMABUFFERSIZE )
6965 Copycount = DMABUFFERSIZE;
6966 else
6967 Copycount = BufferSize;
6968
6969 /* Actually copy data from source buffer to DMA buffer. */
6970 /* Also set the data count for this individual DMA buffer. */
6971 if ( info->bus_type == MGSL_BUS_TYPE_PCI )
6972 mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount);
6973 else
6974 memcpy(pBufEntry->virt_addr, Buffer, Copycount);
6975
6976 pBufEntry->count = Copycount;
6977
6978 /* Advance source pointer and reduce remaining data count. */
6979 Buffer += Copycount;
6980 BufferSize -= Copycount;
6981
6982 ++info->tx_dma_buffers_used;
6983 }
6984
6985 /* remember next available tx dma buffer */
6986 info->current_tx_buffer = i;
6987
6988} /* end of mgsl_load_tx_dma_buffer() */
6989
6990/*
6991 * mgsl_register_test()
6992 *
6993 * Performs a register test of the 16C32.
6994 *
6995 * Arguments: info pointer to device instance data
Joe Perches0fab6de2008-04-28 02:14:02 -07006996 * Return Value: true if test passed, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07006997 */
Joe Perches0fab6de2008-04-28 02:14:02 -07006998static bool mgsl_register_test( struct mgsl_struct *info )
Linus Torvalds1da177e2005-04-16 15:20:36 -07006999{
7000 static unsigned short BitPatterns[] =
7001 { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f };
Tobias Klauserfe971072006-01-09 20:54:02 -08007002 static unsigned int Patterncount = ARRAY_SIZE(BitPatterns);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007003 unsigned int i;
Joe Perches0fab6de2008-04-28 02:14:02 -07007004 bool rc = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007005 unsigned long flags;
7006
7007 spin_lock_irqsave(&info->irq_spinlock,flags);
7008 usc_reset(info);
7009
7010 /* Verify the reset state of some registers. */
7011
7012 if ( (usc_InReg( info, SICR ) != 0) ||
7013 (usc_InReg( info, IVR ) != 0) ||
7014 (usc_InDmaReg( info, DIVR ) != 0) ){
Joe Perches0fab6de2008-04-28 02:14:02 -07007015 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007016 }
7017
Joe Perches0fab6de2008-04-28 02:14:02 -07007018 if ( rc ){
Linus Torvalds1da177e2005-04-16 15:20:36 -07007019 /* Write bit patterns to various registers but do it out of */
7020 /* sync, then read back and verify values. */
7021
7022 for ( i = 0 ; i < Patterncount ; i++ ) {
7023 usc_OutReg( info, TC0R, BitPatterns[i] );
7024 usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] );
7025 usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] );
7026 usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] );
7027 usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] );
7028 usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] );
7029
7030 if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) ||
7031 (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) ||
7032 (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) ||
7033 (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) ||
7034 (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) ||
7035 (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){
Joe Perches0fab6de2008-04-28 02:14:02 -07007036 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007037 break;
7038 }
7039 }
7040 }
7041
7042 usc_reset(info);
7043 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7044
7045 return rc;
7046
7047} /* end of mgsl_register_test() */
7048
7049/* mgsl_irq_test() Perform interrupt test of the 16C32.
7050 *
7051 * Arguments: info pointer to device instance data
Joe Perches0fab6de2008-04-28 02:14:02 -07007052 * Return Value: true if test passed, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07007053 */
Joe Perches0fab6de2008-04-28 02:14:02 -07007054static bool mgsl_irq_test( struct mgsl_struct *info )
Linus Torvalds1da177e2005-04-16 15:20:36 -07007055{
7056 unsigned long EndTime;
7057 unsigned long flags;
7058
7059 spin_lock_irqsave(&info->irq_spinlock,flags);
7060 usc_reset(info);
7061
7062 /*
7063 * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
Joe Perches0fab6de2008-04-28 02:14:02 -07007064 * The ISR sets irq_occurred to true.
Linus Torvalds1da177e2005-04-16 15:20:36 -07007065 */
7066
Joe Perches0fab6de2008-04-28 02:14:02 -07007067 info->irq_occurred = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007068
7069 /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */
7070 /* Enable INTEN (Port 6, Bit12) */
7071 /* This connects the IRQ request signal to the ISA bus */
7072 /* on the ISA adapter. This has no effect for the PCI adapter */
7073 usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) );
7074
7075 usc_EnableMasterIrqBit(info);
7076 usc_EnableInterrupts(info, IO_PIN);
7077 usc_ClearIrqPendingBits(info, IO_PIN);
7078
7079 usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
7080 usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);
7081
7082 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7083
7084 EndTime=100;
7085 while( EndTime-- && !info->irq_occurred ) {
7086 msleep_interruptible(10);
7087 }
7088
7089 spin_lock_irqsave(&info->irq_spinlock,flags);
7090 usc_reset(info);
7091 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7092
Joe Perches0fab6de2008-04-28 02:14:02 -07007093 return info->irq_occurred;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007094
7095} /* end of mgsl_irq_test() */
7096
7097/* mgsl_dma_test()
7098 *
7099 * Perform a DMA test of the 16C32. A small frame is
7100 * transmitted via DMA from a transmit buffer to a receive buffer
7101 * using single buffer DMA mode.
7102 *
7103 * Arguments: info pointer to device instance data
Joe Perches0fab6de2008-04-28 02:14:02 -07007104 * Return Value: true if test passed, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07007105 */
Joe Perches0fab6de2008-04-28 02:14:02 -07007106static bool mgsl_dma_test( struct mgsl_struct *info )
Linus Torvalds1da177e2005-04-16 15:20:36 -07007107{
7108 unsigned short FifoLevel;
7109 unsigned long phys_addr;
7110 unsigned int FrameSize;
7111 unsigned int i;
7112 char *TmpPtr;
Joe Perches0fab6de2008-04-28 02:14:02 -07007113 bool rc = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007114 unsigned short status=0;
7115 unsigned long EndTime;
7116 unsigned long flags;
7117 MGSL_PARAMS tmp_params;
7118
7119 /* save current port options */
7120 memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
7121 /* load default port options */
7122 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
7123
7124#define TESTFRAMESIZE 40
7125
7126 spin_lock_irqsave(&info->irq_spinlock,flags);
7127
7128 /* setup 16C32 for SDLC DMA transfer mode */
7129
7130 usc_reset(info);
7131 usc_set_sdlc_mode(info);
7132 usc_enable_loopback(info,1);
7133
7134 /* Reprogram the RDMR so that the 16C32 does NOT clear the count
7135 * field of the buffer entry after fetching buffer address. This
7136 * way we can detect a DMA failure for a DMA read (which should be
7137 * non-destructive to system memory) before we try and write to
7138 * memory (where a failure could corrupt system memory).
7139 */
7140
7141 /* Receive DMA mode Register (RDMR)
7142 *
7143 * <15..14> 11 DMA mode = Linked List Buffer mode
7144 * <13> 1 RSBinA/L = store Rx status Block in List entry
7145 * <12> 0 1 = Clear count of List Entry after fetching
7146 * <11..10> 00 Address mode = Increment
7147 * <9> 1 Terminate Buffer on RxBound
7148 * <8> 0 Bus Width = 16bits
7149 * <7..0> ? status Bits (write as 0s)
7150 *
7151 * 1110 0010 0000 0000 = 0xe200
7152 */
7153
7154 usc_OutDmaReg( info, RDMR, 0xe200 );
7155
7156 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7157
7158
7159 /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */
7160
7161 FrameSize = TESTFRAMESIZE;
7162
7163 /* setup 1st transmit buffer entry: */
7164 /* with frame size and transmit control word */
7165
7166 info->tx_buffer_list[0].count = FrameSize;
7167 info->tx_buffer_list[0].rcc = FrameSize;
7168 info->tx_buffer_list[0].status = 0x4000;
7169
7170 /* build a transmit frame in 1st transmit DMA buffer */
7171
7172 TmpPtr = info->tx_buffer_list[0].virt_addr;
7173 for (i = 0; i < FrameSize; i++ )
7174 *TmpPtr++ = i;
7175
7176 /* setup 1st receive buffer entry: */
7177 /* clear status, set max receive buffer size */
7178
7179 info->rx_buffer_list[0].status = 0;
7180 info->rx_buffer_list[0].count = FrameSize + 4;
7181
7182 /* zero out the 1st receive buffer */
7183
7184 memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 );
7185
7186 /* Set count field of next buffer entries to prevent */
7187 /* 16C32 from using buffers after the 1st one. */
7188
7189 info->tx_buffer_list[1].count = 0;
7190 info->rx_buffer_list[1].count = 0;
7191
7192
7193 /***************************/
7194 /* Program 16C32 receiver. */
7195 /***************************/
7196
7197 spin_lock_irqsave(&info->irq_spinlock,flags);
7198
7199 /* setup DMA transfers */
7200 usc_RTCmd( info, RTCmd_PurgeRxFifo );
7201
7202 /* program 16C32 receiver with physical address of 1st DMA buffer entry */
7203 phys_addr = info->rx_buffer_list[0].phys_entry;
7204 usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr );
7205 usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) );
7206
7207 /* Clear the Rx DMA status bits (read RDMR) and start channel */
7208 usc_InDmaReg( info, RDMR );
7209 usc_DmaCmd( info, DmaCmd_InitRxChannel );
7210
7211 /* Enable Receiver (RMR <1..0> = 10) */
7212 usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
7213
7214 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7215
7216
7217 /*************************************************************/
7218 /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */
7219 /*************************************************************/
7220
7221 /* Wait 100ms for interrupt. */
7222 EndTime = jiffies + msecs_to_jiffies(100);
7223
7224 for(;;) {
7225 if (time_after(jiffies, EndTime)) {
Joe Perches0fab6de2008-04-28 02:14:02 -07007226 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007227 break;
7228 }
7229
7230 spin_lock_irqsave(&info->irq_spinlock,flags);
7231 status = usc_InDmaReg( info, RDMR );
7232 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7233
7234 if ( !(status & BIT4) && (status & BIT5) ) {
7235 /* INITG (BIT 4) is inactive (no entry read in progress) AND */
7236 /* BUSY (BIT 5) is active (channel still active). */
7237 /* This means the buffer entry read has completed. */
7238 break;
7239 }
7240 }
7241
7242
7243 /******************************/
7244 /* Program 16C32 transmitter. */
7245 /******************************/
7246
7247 spin_lock_irqsave(&info->irq_spinlock,flags);
7248
7249 /* Program the Transmit Character Length Register (TCLR) */
7250 /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */
7251
7252 usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count );
7253 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7254
7255 /* Program the address of the 1st DMA Buffer Entry in linked list */
7256
7257 phys_addr = info->tx_buffer_list[0].phys_entry;
7258 usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr );
7259 usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) );
7260
7261 /* unlatch Tx status bits, and start transmit channel. */
7262
7263 usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) );
7264 usc_DmaCmd( info, DmaCmd_InitTxChannel );
7265
7266 /* wait for DMA controller to fill transmit FIFO */
7267
7268 usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
7269
7270 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7271
7272
7273 /**********************************/
7274 /* WAIT FOR TRANSMIT FIFO TO FILL */
7275 /**********************************/
7276
7277 /* Wait 100ms */
7278 EndTime = jiffies + msecs_to_jiffies(100);
7279
7280 for(;;) {
7281 if (time_after(jiffies, EndTime)) {
Joe Perches0fab6de2008-04-28 02:14:02 -07007282 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007283 break;
7284 }
7285
7286 spin_lock_irqsave(&info->irq_spinlock,flags);
7287 FifoLevel = usc_InReg(info, TICR) >> 8;
7288 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7289
7290 if ( FifoLevel < 16 )
7291 break;
7292 else
7293 if ( FrameSize < 32 ) {
7294 /* This frame is smaller than the entire transmit FIFO */
7295 /* so wait for the entire frame to be loaded. */
7296 if ( FifoLevel <= (32 - FrameSize) )
7297 break;
7298 }
7299 }
7300
7301
Joe Perches0fab6de2008-04-28 02:14:02 -07007302 if ( rc )
Linus Torvalds1da177e2005-04-16 15:20:36 -07007303 {
7304 /* Enable 16C32 transmitter. */
7305
7306 spin_lock_irqsave(&info->irq_spinlock,flags);
7307
7308 /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
7309 usc_TCmd( info, TCmd_SendFrame );
7310 usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
7311
7312 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7313
7314
7315 /******************************/
7316 /* WAIT FOR TRANSMIT COMPLETE */
7317 /******************************/
7318
7319 /* Wait 100ms */
7320 EndTime = jiffies + msecs_to_jiffies(100);
7321
7322 /* While timer not expired wait for transmit complete */
7323
7324 spin_lock_irqsave(&info->irq_spinlock,flags);
7325 status = usc_InReg( info, TCSR );
7326 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7327
7328 while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) {
7329 if (time_after(jiffies, EndTime)) {
Joe Perches0fab6de2008-04-28 02:14:02 -07007330 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007331 break;
7332 }
7333
7334 spin_lock_irqsave(&info->irq_spinlock,flags);
7335 status = usc_InReg( info, TCSR );
7336 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7337 }
7338 }
7339
7340
Joe Perches0fab6de2008-04-28 02:14:02 -07007341 if ( rc ){
Linus Torvalds1da177e2005-04-16 15:20:36 -07007342 /* CHECK FOR TRANSMIT ERRORS */
7343 if ( status & (BIT5 + BIT1) )
Joe Perches0fab6de2008-04-28 02:14:02 -07007344 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007345 }
7346
Joe Perches0fab6de2008-04-28 02:14:02 -07007347 if ( rc ) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07007348 /* WAIT FOR RECEIVE COMPLETE */
7349
7350 /* Wait 100ms */
7351 EndTime = jiffies + msecs_to_jiffies(100);
7352
7353 /* Wait for 16C32 to write receive status to buffer entry. */
7354 status=info->rx_buffer_list[0].status;
7355 while ( status == 0 ) {
7356 if (time_after(jiffies, EndTime)) {
Joe Perches0fab6de2008-04-28 02:14:02 -07007357 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007358 break;
7359 }
7360 status=info->rx_buffer_list[0].status;
7361 }
7362 }
7363
7364
Joe Perches0fab6de2008-04-28 02:14:02 -07007365 if ( rc ) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07007366 /* CHECK FOR RECEIVE ERRORS */
7367 status = info->rx_buffer_list[0].status;
7368
7369 if ( status & (BIT8 + BIT3 + BIT1) ) {
7370 /* receive error has occurred */
Joe Perches0fab6de2008-04-28 02:14:02 -07007371 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007372 } else {
7373 if ( memcmp( info->tx_buffer_list[0].virt_addr ,
7374 info->rx_buffer_list[0].virt_addr, FrameSize ) ){
Joe Perches0fab6de2008-04-28 02:14:02 -07007375 rc = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007376 }
7377 }
7378 }
7379
7380 spin_lock_irqsave(&info->irq_spinlock,flags);
7381 usc_reset( info );
7382 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7383
7384 /* restore current port options */
7385 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
7386
7387 return rc;
7388
7389} /* end of mgsl_dma_test() */
7390
7391/* mgsl_adapter_test()
7392 *
7393 * Perform the register, IRQ, and DMA tests for the 16C32.
7394 *
7395 * Arguments: info pointer to device instance data
7396 * Return Value: 0 if success, otherwise -ENODEV
7397 */
7398static int mgsl_adapter_test( struct mgsl_struct *info )
7399{
7400 if ( debug_level >= DEBUG_LEVEL_INFO )
7401 printk( "%s(%d):Testing device %s\n",
7402 __FILE__,__LINE__,info->device_name );
7403
7404 if ( !mgsl_register_test( info ) ) {
7405 info->init_error = DiagStatus_AddressFailure;
7406 printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
7407 __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
7408 return -ENODEV;
7409 }
7410
7411 if ( !mgsl_irq_test( info ) ) {
7412 info->init_error = DiagStatus_IrqFailure;
7413 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
7414 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
7415 return -ENODEV;
7416 }
7417
7418 if ( !mgsl_dma_test( info ) ) {
7419 info->init_error = DiagStatus_DmaFailure;
7420 printk( "%s(%d):DMA test failure for device %s DMA=%d\n",
7421 __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) );
7422 return -ENODEV;
7423 }
7424
7425 if ( debug_level >= DEBUG_LEVEL_INFO )
7426 printk( "%s(%d):device %s passed diagnostics\n",
7427 __FILE__,__LINE__,info->device_name );
7428
7429 return 0;
7430
7431} /* end of mgsl_adapter_test() */
7432
7433/* mgsl_memory_test()
7434 *
7435 * Test the shared memory on a PCI adapter.
7436 *
7437 * Arguments: info pointer to device instance data
Joe Perches0fab6de2008-04-28 02:14:02 -07007438 * Return Value: true if test passed, otherwise false
Linus Torvalds1da177e2005-04-16 15:20:36 -07007439 */
Joe Perches0fab6de2008-04-28 02:14:02 -07007440static bool mgsl_memory_test( struct mgsl_struct *info )
Linus Torvalds1da177e2005-04-16 15:20:36 -07007441{
Tobias Klauserfe971072006-01-09 20:54:02 -08007442 static unsigned long BitPatterns[] =
7443 { 0x0, 0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
7444 unsigned long Patterncount = ARRAY_SIZE(BitPatterns);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007445 unsigned long i;
7446 unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long);
7447 unsigned long * TestAddr;
7448
7449 if ( info->bus_type != MGSL_BUS_TYPE_PCI )
Joe Perches0fab6de2008-04-28 02:14:02 -07007450 return true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007451
7452 TestAddr = (unsigned long *)info->memory_base;
7453
7454 /* Test data lines with test pattern at one location. */
7455
7456 for ( i = 0 ; i < Patterncount ; i++ ) {
7457 *TestAddr = BitPatterns[i];
7458 if ( *TestAddr != BitPatterns[i] )
Joe Perches0fab6de2008-04-28 02:14:02 -07007459 return false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007460 }
7461
7462 /* Test address lines with incrementing pattern over */
7463 /* entire address range. */
7464
7465 for ( i = 0 ; i < TestLimit ; i++ ) {
7466 *TestAddr = i * 4;
7467 TestAddr++;
7468 }
7469
7470 TestAddr = (unsigned long *)info->memory_base;
7471
7472 for ( i = 0 ; i < TestLimit ; i++ ) {
7473 if ( *TestAddr != i * 4 )
Joe Perches0fab6de2008-04-28 02:14:02 -07007474 return false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007475 TestAddr++;
7476 }
7477
7478 memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE );
7479
Joe Perches0fab6de2008-04-28 02:14:02 -07007480 return true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007481
7482} /* End Of mgsl_memory_test() */
7483
7484
7485/* mgsl_load_pci_memory()
7486 *
7487 * Load a large block of data into the PCI shared memory.
7488 * Use this instead of memcpy() or memmove() to move data
7489 * into the PCI shared memory.
7490 *
7491 * Notes:
7492 *
7493 * This function prevents the PCI9050 interface chip from hogging
7494 * the adapter local bus, which can starve the 16C32 by preventing
7495 * 16C32 bus master cycles.
7496 *
7497 * The PCI9050 documentation says that the 9050 will always release
7498 * control of the local bus after completing the current read
7499 * or write operation.
7500 *
7501 * It appears that as long as the PCI9050 write FIFO is full, the
7502 * PCI9050 treats all of the writes as a single burst transaction
7503 * and will not release the bus. This causes DMA latency problems
7504 * at high speeds when copying large data blocks to the shared
7505 * memory.
7506 *
7507 * This function in effect, breaks the a large shared memory write
7508 * into multiple transations by interleaving a shared memory read
7509 * which will flush the write FIFO and 'complete' the write
7510 * transation. This allows any pending DMA request to gain control
7511 * of the local bus in a timely fasion.
7512 *
7513 * Arguments:
7514 *
7515 * TargetPtr pointer to target address in PCI shared memory
7516 * SourcePtr pointer to source buffer for data
7517 * count count in bytes of data to copy
7518 *
7519 * Return Value: None
7520 */
7521static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr,
7522 unsigned short count )
7523{
7524 /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */
7525#define PCI_LOAD_INTERVAL 64
7526
7527 unsigned short Intervalcount = count / PCI_LOAD_INTERVAL;
7528 unsigned short Index;
7529 unsigned long Dummy;
7530
7531 for ( Index = 0 ; Index < Intervalcount ; Index++ )
7532 {
7533 memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL);
7534 Dummy = *((volatile unsigned long *)TargetPtr);
7535 TargetPtr += PCI_LOAD_INTERVAL;
7536 SourcePtr += PCI_LOAD_INTERVAL;
7537 }
7538
7539 memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL );
7540
7541} /* End Of mgsl_load_pci_memory() */
7542
7543static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit)
7544{
7545 int i;
7546 int linecount;
7547 if (xmit)
7548 printk("%s tx data:\n",info->device_name);
7549 else
7550 printk("%s rx data:\n",info->device_name);
7551
7552 while(count) {
7553 if (count > 16)
7554 linecount = 16;
7555 else
7556 linecount = count;
7557
7558 for(i=0;i<linecount;i++)
7559 printk("%02X ",(unsigned char)data[i]);
7560 for(;i<17;i++)
7561 printk(" ");
7562 for(i=0;i<linecount;i++) {
7563 if (data[i]>=040 && data[i]<=0176)
7564 printk("%c",data[i]);
7565 else
7566 printk(".");
7567 }
7568 printk("\n");
7569
7570 data += linecount;
7571 count -= linecount;
7572 }
7573} /* end of mgsl_trace_block() */
7574
7575/* mgsl_tx_timeout()
7576 *
7577 * called when HDLC frame times out
7578 * update stats and do tx completion processing
7579 *
7580 * Arguments: context pointer to device instance data
7581 * Return Value: None
7582 */
7583static void mgsl_tx_timeout(unsigned long context)
7584{
7585 struct mgsl_struct *info = (struct mgsl_struct*)context;
7586 unsigned long flags;
7587
7588 if ( debug_level >= DEBUG_LEVEL_INFO )
7589 printk( "%s(%d):mgsl_tx_timeout(%s)\n",
7590 __FILE__,__LINE__,info->device_name);
7591 if(info->tx_active &&
7592 (info->params.mode == MGSL_MODE_HDLC ||
7593 info->params.mode == MGSL_MODE_RAW) ) {
7594 info->icount.txtimeout++;
7595 }
7596 spin_lock_irqsave(&info->irq_spinlock,flags);
Joe Perches0fab6de2008-04-28 02:14:02 -07007597 info->tx_active = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007598 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
7599
7600 if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE )
7601 usc_loopmode_cancel_transmit( info );
7602
7603 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7604
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08007605#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07007606 if (info->netcount)
7607 hdlcdev_tx_done(info);
7608 else
7609#endif
7610 mgsl_bh_transmit(info);
7611
7612} /* end of mgsl_tx_timeout() */
7613
7614/* signal that there are no more frames to send, so that
7615 * line is 'released' by echoing RxD to TxD when current
7616 * transmission is complete (or immediately if no tx in progress).
7617 */
7618static int mgsl_loopmode_send_done( struct mgsl_struct * info )
7619{
7620 unsigned long flags;
7621
7622 spin_lock_irqsave(&info->irq_spinlock,flags);
7623 if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
7624 if (info->tx_active)
Joe Perches0fab6de2008-04-28 02:14:02 -07007625 info->loopmode_send_done_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007626 else
7627 usc_loopmode_send_done(info);
7628 }
7629 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7630
7631 return 0;
7632}
7633
7634/* release the line by echoing RxD to TxD
7635 * upon completion of a transmit frame
7636 */
7637static void usc_loopmode_send_done( struct mgsl_struct * info )
7638{
Joe Perches0fab6de2008-04-28 02:14:02 -07007639 info->loopmode_send_done_requested = false;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007640 /* clear CMR:13 to 0 to start echoing RxData to TxData */
7641 info->cmr_value &= ~BIT13;
7642 usc_OutReg(info, CMR, info->cmr_value);
7643}
7644
7645/* abort a transmit in progress while in HDLC LoopMode
7646 */
7647static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
7648{
7649 /* reset tx dma channel and purge TxFifo */
7650 usc_RTCmd( info, RTCmd_PurgeTxFifo );
7651 usc_DmaCmd( info, DmaCmd_ResetTxChannel );
7652 usc_loopmode_send_done( info );
7653}
7654
7655/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled
7656 * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort)
7657 * we must clear CMR:13 to begin repeating TxData to RxData
7658 */
7659static void usc_loopmode_insert_request( struct mgsl_struct * info )
7660{
Joe Perches0fab6de2008-04-28 02:14:02 -07007661 info->loopmode_insert_requested = true;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007662
7663 /* enable RxAbort irq. On next RxAbort, clear CMR:13 to
7664 * begin repeating TxData on RxData (complete insertion)
7665 */
7666 usc_OutReg( info, RICR,
7667 (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
7668
7669 /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
7670 info->cmr_value |= BIT13;
7671 usc_OutReg(info, CMR, info->cmr_value);
7672}
7673
7674/* return 1 if station is inserted into the loop, otherwise 0
7675 */
7676static int usc_loopmode_active( struct mgsl_struct * info)
7677{
7678 return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ;
7679}
7680
Paul Fulghumaf69c7f2006-12-06 20:40:24 -08007681#if SYNCLINK_GENERIC_HDLC
Linus Torvalds1da177e2005-04-16 15:20:36 -07007682
7683/**
7684 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
7685 * set encoding and frame check sequence (FCS) options
7686 *
7687 * dev pointer to network device structure
7688 * encoding serial encoding setting
7689 * parity FCS setting
7690 *
7691 * returns 0 if success, otherwise error code
7692 */
7693static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
7694 unsigned short parity)
7695{
7696 struct mgsl_struct *info = dev_to_port(dev);
7697 unsigned char new_encoding;
7698 unsigned short new_crctype;
7699
7700 /* return error if TTY interface open */
Alan Cox8fb06c72008-07-16 21:56:46 +01007701 if (info->port.count)
Linus Torvalds1da177e2005-04-16 15:20:36 -07007702 return -EBUSY;
7703
7704 switch (encoding)
7705 {
7706 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
7707 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
7708 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
7709 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
7710 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
7711 default: return -EINVAL;
7712 }
7713
7714 switch (parity)
7715 {
7716 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
7717 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
7718 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
7719 default: return -EINVAL;
7720 }
7721
7722 info->params.encoding = new_encoding;
Alexey Dobriyan53b35312006-03-24 03:16:13 -08007723 info->params.crc_type = new_crctype;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007724
7725 /* if network interface up, reprogram hardware */
7726 if (info->netcount)
7727 mgsl_program_hw(info);
7728
7729 return 0;
7730}
7731
7732/**
7733 * called by generic HDLC layer to send frame
7734 *
7735 * skb socket buffer containing HDLC frame
7736 * dev pointer to network device structure
7737 *
7738 * returns 0 if success, otherwise error code
7739 */
7740static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
7741{
7742 struct mgsl_struct *info = dev_to_port(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007743 unsigned long flags;
7744
7745 if (debug_level >= DEBUG_LEVEL_INFO)
7746 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
7747
7748 /* stop sending until this frame completes */
7749 netif_stop_queue(dev);
7750
7751 /* copy data to device buffers */
7752 info->xmit_cnt = skb->len;
7753 mgsl_load_tx_dma_buffer(info, skb->data, skb->len);
7754
7755 /* update network statistics */
Krzysztof Halasa198191c2008-06-30 23:26:53 +02007756 dev->stats.tx_packets++;
7757 dev->stats.tx_bytes += skb->len;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007758
7759 /* done with socket buffer, so free it */
7760 dev_kfree_skb(skb);
7761
7762 /* save start time for transmit timeout detection */
7763 dev->trans_start = jiffies;
7764
7765 /* start hardware transmitter if necessary */
7766 spin_lock_irqsave(&info->irq_spinlock,flags);
7767 if (!info->tx_active)
7768 usc_start_transmitter(info);
7769 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7770
7771 return 0;
7772}
7773
7774/**
7775 * called by network layer when interface enabled
7776 * claim resources and initialize hardware
7777 *
7778 * dev pointer to network device structure
7779 *
7780 * returns 0 if success, otherwise error code
7781 */
7782static int hdlcdev_open(struct net_device *dev)
7783{
7784 struct mgsl_struct *info = dev_to_port(dev);
7785 int rc;
7786 unsigned long flags;
7787
7788 if (debug_level >= DEBUG_LEVEL_INFO)
7789 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
7790
7791 /* generic HDLC layer open processing */
7792 if ((rc = hdlc_open(dev)))
7793 return rc;
7794
7795 /* arbitrate between network and tty opens */
7796 spin_lock_irqsave(&info->netlock, flags);
Alan Cox8fb06c72008-07-16 21:56:46 +01007797 if (info->port.count != 0 || info->netcount != 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07007798 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
7799 spin_unlock_irqrestore(&info->netlock, flags);
7800 return -EBUSY;
7801 }
7802 info->netcount=1;
7803 spin_unlock_irqrestore(&info->netlock, flags);
7804
7805 /* claim resources and init adapter */
7806 if ((rc = startup(info)) != 0) {
7807 spin_lock_irqsave(&info->netlock, flags);
7808 info->netcount=0;
7809 spin_unlock_irqrestore(&info->netlock, flags);
7810 return rc;
7811 }
7812
7813 /* assert DTR and RTS, apply hardware settings */
7814 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
7815 mgsl_program_hw(info);
7816
7817 /* enable network layer transmit */
7818 dev->trans_start = jiffies;
7819 netif_start_queue(dev);
7820
7821 /* inform generic HDLC layer of current DCD status */
7822 spin_lock_irqsave(&info->irq_spinlock, flags);
7823 usc_get_serial_signals(info);
7824 spin_unlock_irqrestore(&info->irq_spinlock, flags);
Krzysztof Halasafbeff3c2006-07-21 14:44:55 -07007825 if (info->serial_signals & SerialSignal_DCD)
7826 netif_carrier_on(dev);
7827 else
7828 netif_carrier_off(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007829 return 0;
7830}
7831
7832/**
7833 * called by network layer when interface is disabled
7834 * shutdown hardware and release resources
7835 *
7836 * dev pointer to network device structure
7837 *
7838 * returns 0 if success, otherwise error code
7839 */
7840static int hdlcdev_close(struct net_device *dev)
7841{
7842 struct mgsl_struct *info = dev_to_port(dev);
7843 unsigned long flags;
7844
7845 if (debug_level >= DEBUG_LEVEL_INFO)
7846 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
7847
7848 netif_stop_queue(dev);
7849
7850 /* shutdown adapter and release resources */
7851 shutdown(info);
7852
7853 hdlc_close(dev);
7854
7855 spin_lock_irqsave(&info->netlock, flags);
7856 info->netcount=0;
7857 spin_unlock_irqrestore(&info->netlock, flags);
7858
7859 return 0;
7860}
7861
7862/**
7863 * called by network layer to process IOCTL call to network device
7864 *
7865 * dev pointer to network device structure
7866 * ifr pointer to network interface request structure
7867 * cmd IOCTL command code
7868 *
7869 * returns 0 if success, otherwise error code
7870 */
7871static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
7872{
7873 const size_t size = sizeof(sync_serial_settings);
7874 sync_serial_settings new_line;
7875 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
7876 struct mgsl_struct *info = dev_to_port(dev);
7877 unsigned int flags;
7878
7879 if (debug_level >= DEBUG_LEVEL_INFO)
7880 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
7881
7882 /* return error if TTY interface open */
Alan Cox8fb06c72008-07-16 21:56:46 +01007883 if (info->port.count)
Linus Torvalds1da177e2005-04-16 15:20:36 -07007884 return -EBUSY;
7885
7886 if (cmd != SIOCWANDEV)
7887 return hdlc_ioctl(dev, ifr, cmd);
7888
7889 switch(ifr->ifr_settings.type) {
7890 case IF_GET_IFACE: /* return current sync_serial_settings */
7891
7892 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
7893 if (ifr->ifr_settings.size < size) {
7894 ifr->ifr_settings.size = size; /* data size wanted */
7895 return -ENOBUFS;
7896 }
7897
7898 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7899 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7900 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7901 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7902
7903 switch (flags){
7904 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
7905 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
7906 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
7907 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
7908 default: new_line.clock_type = CLOCK_DEFAULT;
7909 }
7910
7911 new_line.clock_rate = info->params.clock_speed;
7912 new_line.loopback = info->params.loopback ? 1:0;
7913
7914 if (copy_to_user(line, &new_line, size))
7915 return -EFAULT;
7916 return 0;
7917
7918 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
7919
7920 if(!capable(CAP_NET_ADMIN))
7921 return -EPERM;
7922 if (copy_from_user(&new_line, line, size))
7923 return -EFAULT;
7924
7925 switch (new_line.clock_type)
7926 {
7927 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
7928 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
7929 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
7930 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
7931 case CLOCK_DEFAULT: flags = info->params.flags &
7932 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7933 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7934 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7935 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
7936 default: return -EINVAL;
7937 }
7938
7939 if (new_line.loopback != 0 && new_line.loopback != 1)
7940 return -EINVAL;
7941
7942 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
7943 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
7944 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
7945 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
7946 info->params.flags |= flags;
7947
7948 info->params.loopback = new_line.loopback;
7949
7950 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
7951 info->params.clock_speed = new_line.clock_rate;
7952 else
7953 info->params.clock_speed = 0;
7954
7955 /* if network interface up, reprogram hardware */
7956 if (info->netcount)
7957 mgsl_program_hw(info);
7958 return 0;
7959
7960 default:
7961 return hdlc_ioctl(dev, ifr, cmd);
7962 }
7963}
7964
7965/**
7966 * called by network layer when transmit timeout is detected
7967 *
7968 * dev pointer to network device structure
7969 */
7970static void hdlcdev_tx_timeout(struct net_device *dev)
7971{
7972 struct mgsl_struct *info = dev_to_port(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07007973 unsigned long flags;
7974
7975 if (debug_level >= DEBUG_LEVEL_INFO)
7976 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
7977
Krzysztof Halasa198191c2008-06-30 23:26:53 +02007978 dev->stats.tx_errors++;
7979 dev->stats.tx_aborted_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07007980
7981 spin_lock_irqsave(&info->irq_spinlock,flags);
7982 usc_stop_transmitter(info);
7983 spin_unlock_irqrestore(&info->irq_spinlock,flags);
7984
7985 netif_wake_queue(dev);
7986}
7987
7988/**
7989 * called by device driver when transmit completes
7990 * reenable network layer transmit if stopped
7991 *
7992 * info pointer to device instance information
7993 */
7994static void hdlcdev_tx_done(struct mgsl_struct *info)
7995{
7996 if (netif_queue_stopped(info->netdev))
7997 netif_wake_queue(info->netdev);
7998}
7999
8000/**
8001 * called by device driver when frame received
8002 * pass frame to network layer
8003 *
8004 * info pointer to device instance information
8005 * buf pointer to buffer contianing frame data
8006 * size count of data bytes in buf
8007 */
8008static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size)
8009{
8010 struct sk_buff *skb = dev_alloc_skb(size);
8011 struct net_device *dev = info->netdev;
Linus Torvalds1da177e2005-04-16 15:20:36 -07008012
8013 if (debug_level >= DEBUG_LEVEL_INFO)
Krzysztof Halasa198191c2008-06-30 23:26:53 +02008014 printk("hdlcdev_rx(%s)\n", dev->name);
Linus Torvalds1da177e2005-04-16 15:20:36 -07008015
8016 if (skb == NULL) {
Krzysztof Halasa198191c2008-06-30 23:26:53 +02008017 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
8018 dev->name);
8019 dev->stats.rx_dropped++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07008020 return;
8021 }
8022
Krzysztof Halasa198191c2008-06-30 23:26:53 +02008023 memcpy(skb_put(skb, size), buf, size);
Linus Torvalds1da177e2005-04-16 15:20:36 -07008024
Krzysztof Halasa198191c2008-06-30 23:26:53 +02008025 skb->protocol = hdlc_type_trans(skb, dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -07008026
Krzysztof Halasa198191c2008-06-30 23:26:53 +02008027 dev->stats.rx_packets++;
8028 dev->stats.rx_bytes += size;
Linus Torvalds1da177e2005-04-16 15:20:36 -07008029
8030 netif_rx(skb);
8031
Krzysztof Halasa198191c2008-06-30 23:26:53 +02008032 dev->last_rx = jiffies;
Linus Torvalds1da177e2005-04-16 15:20:36 -07008033}
8034
8035/**
8036 * called by device driver when adding device instance
8037 * do generic HDLC initialization
8038 *
8039 * info pointer to device instance information
8040 *
8041 * returns 0 if success, otherwise error code
8042 */
8043static int hdlcdev_init(struct mgsl_struct *info)
8044{
8045 int rc;
8046 struct net_device *dev;
8047 hdlc_device *hdlc;
8048
8049 /* allocate and initialize network and HDLC layer objects */
8050
8051 if (!(dev = alloc_hdlcdev(info))) {
8052 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
8053 return -ENOMEM;
8054 }
8055
8056 /* for network layer reporting purposes only */
8057 dev->base_addr = info->io_base;
8058 dev->irq = info->irq_level;
8059 dev->dma = info->dma_level;
8060
8061 /* network layer callbacks and settings */
8062 dev->do_ioctl = hdlcdev_ioctl;
8063 dev->open = hdlcdev_open;
8064 dev->stop = hdlcdev_close;
8065 dev->tx_timeout = hdlcdev_tx_timeout;
8066 dev->watchdog_timeo = 10*HZ;
8067 dev->tx_queue_len = 50;
8068
8069 /* generic HDLC layer callbacks and settings */
8070 hdlc = dev_to_hdlc(dev);
8071 hdlc->attach = hdlcdev_attach;
8072 hdlc->xmit = hdlcdev_xmit;
8073
8074 /* register objects with HDLC layer */
8075 if ((rc = register_hdlc_device(dev))) {
8076 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
8077 free_netdev(dev);
8078 return rc;
8079 }
8080
8081 info->netdev = dev;
8082 return 0;
8083}
8084
8085/**
8086 * called by device driver when removing device instance
8087 * do generic HDLC cleanup
8088 *
8089 * info pointer to device instance information
8090 */
8091static void hdlcdev_exit(struct mgsl_struct *info)
8092{
8093 unregister_hdlc_device(info->netdev);
8094 free_netdev(info->netdev);
8095 info->netdev = NULL;
8096}
8097
8098#endif /* CONFIG_HDLC */
8099
8100
8101static int __devinit synclink_init_one (struct pci_dev *dev,
8102 const struct pci_device_id *ent)
8103{
8104 struct mgsl_struct *info;
8105
8106 if (pci_enable_device(dev)) {
8107 printk("error enabling pci device %p\n", dev);
8108 return -EIO;
8109 }
8110
8111 if (!(info = mgsl_allocate_device())) {
8112 printk("can't allocate device instance data.\n");
8113 return -EIO;
8114 }
8115
8116 /* Copy user configuration info to device instance data */
8117
8118 info->io_base = pci_resource_start(dev, 2);
8119 info->irq_level = dev->irq;
8120 info->phys_memory_base = pci_resource_start(dev, 3);
8121
8122 /* Because veremap only works on page boundaries we must map
8123 * a larger area than is actually implemented for the LCR
8124 * memory range. We map a full page starting at the page boundary.
8125 */
8126 info->phys_lcr_base = pci_resource_start(dev, 0);
8127 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
8128 info->phys_lcr_base &= ~(PAGE_SIZE-1);
8129
8130 info->bus_type = MGSL_BUS_TYPE_PCI;
8131 info->io_addr_size = 8;
Thomas Gleixner0f2ed4c2006-07-01 19:29:33 -07008132 info->irq_flags = IRQF_SHARED;
Linus Torvalds1da177e2005-04-16 15:20:36 -07008133
8134 if (dev->device == 0x0210) {
8135 /* Version 1 PCI9030 based universal PCI adapter */
8136 info->misc_ctrl_value = 0x007c4080;
8137 info->hw_version = 1;
8138 } else {
8139 /* Version 0 PCI9050 based 5V PCI adapter
8140 * A PCI9050 bug prevents reading LCR registers if
8141 * LCR base address bit 7 is set. Maintain shadow
8142 * value so we can write to LCR misc control reg.
8143 */
8144 info->misc_ctrl_value = 0x087e4546;
8145 info->hw_version = 0;
8146 }
8147
8148 mgsl_add_device(info);
8149
8150 return 0;
8151}
8152
8153static void __devexit synclink_remove_one (struct pci_dev *dev)
8154{
8155}
8156