blob: 8caef28e07564deb7a21f5902ae6527032951190 [file] [log] [blame]
Roland Stigge2944a442012-06-07 12:22:15 +02001/*
2 * NXP LPC32XX NAND SLC driver
3 *
4 * Authors:
5 * Kevin Wells <kevin.wells@nxp.com>
6 * Roland Stigge <stigge@antcom.de>
7 *
8 * Copyright © 2011 NXP Semiconductors
9 * Copyright © 2012 Roland Stigge
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 */
21
22#include <linux/slab.h>
23#include <linux/module.h>
24#include <linux/platform_device.h>
25#include <linux/mtd/mtd.h>
26#include <linux/mtd/nand.h>
27#include <linux/mtd/partitions.h>
28#include <linux/clk.h>
29#include <linux/err.h>
30#include <linux/delay.h>
31#include <linux/io.h>
32#include <linux/mm.h>
33#include <linux/dma-mapping.h>
34#include <linux/dmaengine.h>
35#include <linux/mtd/nand_ecc.h>
36#include <linux/gpio.h>
37#include <linux/of.h>
38#include <linux/of_mtd.h>
39#include <linux/of_gpio.h>
Roland Stiggede20c222012-08-16 15:15:34 +020040#include <linux/mtd/lpc32xx_slc.h>
Roland Stigge2944a442012-06-07 12:22:15 +020041
42#define LPC32XX_MODNAME "lpc32xx-nand"
43
44/**********************************************************************
45* SLC NAND controller register offsets
46**********************************************************************/
47
48#define SLC_DATA(x) (x + 0x000)
49#define SLC_ADDR(x) (x + 0x004)
50#define SLC_CMD(x) (x + 0x008)
51#define SLC_STOP(x) (x + 0x00C)
52#define SLC_CTRL(x) (x + 0x010)
53#define SLC_CFG(x) (x + 0x014)
54#define SLC_STAT(x) (x + 0x018)
55#define SLC_INT_STAT(x) (x + 0x01C)
56#define SLC_IEN(x) (x + 0x020)
57#define SLC_ISR(x) (x + 0x024)
58#define SLC_ICR(x) (x + 0x028)
59#define SLC_TAC(x) (x + 0x02C)
60#define SLC_TC(x) (x + 0x030)
61#define SLC_ECC(x) (x + 0x034)
62#define SLC_DMA_DATA(x) (x + 0x038)
63
64/**********************************************************************
65* slc_ctrl register definitions
66**********************************************************************/
67#define SLCCTRL_SW_RESET (1 << 2) /* Reset the NAND controller bit */
68#define SLCCTRL_ECC_CLEAR (1 << 1) /* Reset ECC bit */
69#define SLCCTRL_DMA_START (1 << 0) /* Start DMA channel bit */
70
71/**********************************************************************
72* slc_cfg register definitions
73**********************************************************************/
74#define SLCCFG_CE_LOW (1 << 5) /* Force CE low bit */
75#define SLCCFG_DMA_ECC (1 << 4) /* Enable DMA ECC bit */
76#define SLCCFG_ECC_EN (1 << 3) /* ECC enable bit */
77#define SLCCFG_DMA_BURST (1 << 2) /* DMA burst bit */
78#define SLCCFG_DMA_DIR (1 << 1) /* DMA write(0)/read(1) bit */
79#define SLCCFG_WIDTH (1 << 0) /* External device width, 0=8bit */
80
81/**********************************************************************
82* slc_stat register definitions
83**********************************************************************/
84#define SLCSTAT_DMA_FIFO (1 << 2) /* DMA FIFO has data bit */
85#define SLCSTAT_SLC_FIFO (1 << 1) /* SLC FIFO has data bit */
86#define SLCSTAT_NAND_READY (1 << 0) /* NAND device is ready bit */
87
88/**********************************************************************
89* slc_int_stat, slc_ien, slc_isr, and slc_icr register definitions
90**********************************************************************/
91#define SLCSTAT_INT_TC (1 << 1) /* Transfer count bit */
92#define SLCSTAT_INT_RDY_EN (1 << 0) /* Ready interrupt bit */
93
94/**********************************************************************
95* slc_tac register definitions
96**********************************************************************/
97/* Clock setting for RDY write sample wait time in 2*n clocks */
98#define SLCTAC_WDR(n) (((n) & 0xF) << 28)
99/* Write pulse width in clock cycles, 1 to 16 clocks */
100#define SLCTAC_WWIDTH(n) (((n) & 0xF) << 24)
101/* Write hold time of control and data signals, 1 to 16 clocks */
102#define SLCTAC_WHOLD(n) (((n) & 0xF) << 20)
103/* Write setup time of control and data signals, 1 to 16 clocks */
104#define SLCTAC_WSETUP(n) (((n) & 0xF) << 16)
105/* Clock setting for RDY read sample wait time in 2*n clocks */
106#define SLCTAC_RDR(n) (((n) & 0xF) << 12)
107/* Read pulse width in clock cycles, 1 to 16 clocks */
108#define SLCTAC_RWIDTH(n) (((n) & 0xF) << 8)
109/* Read hold time of control and data signals, 1 to 16 clocks */
110#define SLCTAC_RHOLD(n) (((n) & 0xF) << 4)
111/* Read setup time of control and data signals, 1 to 16 clocks */
112#define SLCTAC_RSETUP(n) (((n) & 0xF) << 0)
113
114/**********************************************************************
115* slc_ecc register definitions
116**********************************************************************/
117/* ECC line party fetch macro */
118#define SLCECC_TO_LINEPAR(n) (((n) >> 6) & 0x7FFF)
119#define SLCECC_TO_COLPAR(n) ((n) & 0x3F)
120
121/*
122 * DMA requires storage space for the DMA local buffer and the hardware ECC
123 * storage area. The DMA local buffer is only used if DMA mapping fails
124 * during runtime.
125 */
126#define LPC32XX_DMA_DATA_SIZE 4096
127#define LPC32XX_ECC_SAVE_SIZE ((4096 / 256) * 4)
128
129/* Number of bytes used for ECC stored in NAND per 256 bytes */
130#define LPC32XX_SLC_DEV_ECC_BYTES 3
131
132/*
133 * If the NAND base clock frequency can't be fetched, this frequency will be
134 * used instead as the base. This rate is used to setup the timing registers
135 * used for NAND accesses.
136 */
137#define LPC32XX_DEF_BUS_RATE 133250000
138
139/* Milliseconds for DMA FIFO timeout (unlikely anyway) */
140#define LPC32XX_DMA_TIMEOUT 100
141
142/*
143 * NAND ECC Layout for small page NAND devices
144 * Note: For large and huge page devices, the default layouts are used
145 */
146static struct nand_ecclayout lpc32xx_nand_oob_16 = {
147 .eccbytes = 6,
148 .eccpos = {10, 11, 12, 13, 14, 15},
149 .oobfree = {
150 { .offset = 0, .length = 4 },
151 { .offset = 6, .length = 4 },
152 },
153};
154
155static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
156static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
157
158/*
159 * Small page FLASH BBT descriptors, marker at offset 0, version at offset 6
160 * Note: Large page devices used the default layout
161 */
162static struct nand_bbt_descr bbt_smallpage_main_descr = {
163 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
164 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
165 .offs = 0,
166 .len = 4,
167 .veroffs = 6,
168 .maxblocks = 4,
169 .pattern = bbt_pattern
170};
171
172static struct nand_bbt_descr bbt_smallpage_mirror_descr = {
173 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
174 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
175 .offs = 0,
176 .len = 4,
177 .veroffs = 6,
178 .maxblocks = 4,
179 .pattern = mirror_pattern
180};
181
182/*
183 * NAND platform configuration structure
184 */
185struct lpc32xx_nand_cfg_slc {
186 uint32_t wdr_clks;
187 uint32_t wwidth;
188 uint32_t whold;
189 uint32_t wsetup;
190 uint32_t rdr_clks;
191 uint32_t rwidth;
192 uint32_t rhold;
193 uint32_t rsetup;
194 bool use_bbt;
Alexandre Pereira da Silvadf63fe72012-06-27 17:51:13 +0200195 int wp_gpio;
Roland Stigge2944a442012-06-07 12:22:15 +0200196 struct mtd_partition *parts;
197 unsigned num_parts;
198};
199
200struct lpc32xx_nand_host {
201 struct nand_chip nand_chip;
Roland Stiggede20c222012-08-16 15:15:34 +0200202 struct lpc32xx_slc_platform_data *pdata;
Roland Stigge2944a442012-06-07 12:22:15 +0200203 struct clk *clk;
204 struct mtd_info mtd;
205 void __iomem *io_base;
206 struct lpc32xx_nand_cfg_slc *ncfg;
207
208 struct completion comp;
209 struct dma_chan *dma_chan;
210 uint32_t dma_buf_len;
211 struct dma_slave_config dma_slave_config;
212 struct scatterlist sgl;
213
214 /*
215 * DMA and CPU addresses of ECC work area and data buffer
216 */
217 uint32_t *ecc_buf;
218 uint8_t *data_buf;
219 dma_addr_t io_base_dma;
220};
221
222static void lpc32xx_nand_setup(struct lpc32xx_nand_host *host)
223{
224 uint32_t clkrate, tmp;
225
226 /* Reset SLC controller */
227 writel(SLCCTRL_SW_RESET, SLC_CTRL(host->io_base));
228 udelay(1000);
229
230 /* Basic setup */
231 writel(0, SLC_CFG(host->io_base));
232 writel(0, SLC_IEN(host->io_base));
233 writel((SLCSTAT_INT_TC | SLCSTAT_INT_RDY_EN),
234 SLC_ICR(host->io_base));
235
236 /* Get base clock for SLC block */
237 clkrate = clk_get_rate(host->clk);
238 if (clkrate == 0)
239 clkrate = LPC32XX_DEF_BUS_RATE;
240
241 /* Compute clock setup values */
242 tmp = SLCTAC_WDR(host->ncfg->wdr_clks) |
243 SLCTAC_WWIDTH(1 + (clkrate / host->ncfg->wwidth)) |
244 SLCTAC_WHOLD(1 + (clkrate / host->ncfg->whold)) |
245 SLCTAC_WSETUP(1 + (clkrate / host->ncfg->wsetup)) |
246 SLCTAC_RDR(host->ncfg->rdr_clks) |
247 SLCTAC_RWIDTH(1 + (clkrate / host->ncfg->rwidth)) |
248 SLCTAC_RHOLD(1 + (clkrate / host->ncfg->rhold)) |
249 SLCTAC_RSETUP(1 + (clkrate / host->ncfg->rsetup));
250 writel(tmp, SLC_TAC(host->io_base));
251}
252
253/*
254 * Hardware specific access to control lines
255 */
256static void lpc32xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
257 unsigned int ctrl)
258{
259 uint32_t tmp;
260 struct nand_chip *chip = mtd->priv;
261 struct lpc32xx_nand_host *host = chip->priv;
262
263 /* Does CE state need to be changed? */
264 tmp = readl(SLC_CFG(host->io_base));
265 if (ctrl & NAND_NCE)
266 tmp |= SLCCFG_CE_LOW;
267 else
268 tmp &= ~SLCCFG_CE_LOW;
269 writel(tmp, SLC_CFG(host->io_base));
270
271 if (cmd != NAND_CMD_NONE) {
272 if (ctrl & NAND_CLE)
273 writel(cmd, SLC_CMD(host->io_base));
274 else
275 writel(cmd, SLC_ADDR(host->io_base));
276 }
277}
278
279/*
280 * Read the Device Ready pin
281 */
282static int lpc32xx_nand_device_ready(struct mtd_info *mtd)
283{
284 struct nand_chip *chip = mtd->priv;
285 struct lpc32xx_nand_host *host = chip->priv;
286 int rdy = 0;
287
288 if ((readl(SLC_STAT(host->io_base)) & SLCSTAT_NAND_READY) != 0)
289 rdy = 1;
290
291 return rdy;
292}
293
294/*
295 * Enable NAND write protect
296 */
297static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
298{
Alexandre Pereira da Silvadf63fe72012-06-27 17:51:13 +0200299 if (gpio_is_valid(host->ncfg->wp_gpio))
300 gpio_set_value(host->ncfg->wp_gpio, 0);
Roland Stigge2944a442012-06-07 12:22:15 +0200301}
302
303/*
304 * Disable NAND write protect
305 */
306static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host)
307{
Alexandre Pereira da Silvadf63fe72012-06-27 17:51:13 +0200308 if (gpio_is_valid(host->ncfg->wp_gpio))
309 gpio_set_value(host->ncfg->wp_gpio, 1);
Roland Stigge2944a442012-06-07 12:22:15 +0200310}
311
312/*
313 * Prepares SLC for transfers with H/W ECC enabled
314 */
315static void lpc32xx_nand_ecc_enable(struct mtd_info *mtd, int mode)
316{
317 /* Hardware ECC is enabled automatically in hardware as needed */
318}
319
320/*
321 * Calculates the ECC for the data
322 */
323static int lpc32xx_nand_ecc_calculate(struct mtd_info *mtd,
324 const unsigned char *buf,
325 unsigned char *code)
326{
327 /*
328 * ECC is calculated automatically in hardware during syndrome read
329 * and write operations, so it doesn't need to be calculated here.
330 */
331 return 0;
332}
333
334/*
335 * Read a single byte from NAND device
336 */
337static uint8_t lpc32xx_nand_read_byte(struct mtd_info *mtd)
338{
339 struct nand_chip *chip = mtd->priv;
340 struct lpc32xx_nand_host *host = chip->priv;
341
342 return (uint8_t)readl(SLC_DATA(host->io_base));
343}
344
345/*
346 * Simple device read without ECC
347 */
348static void lpc32xx_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
349{
350 struct nand_chip *chip = mtd->priv;
351 struct lpc32xx_nand_host *host = chip->priv;
352
353 /* Direct device read with no ECC */
354 while (len-- > 0)
355 *buf++ = (uint8_t)readl(SLC_DATA(host->io_base));
356}
357
358/*
359 * Simple device write without ECC
360 */
361static void lpc32xx_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
362{
363 struct nand_chip *chip = mtd->priv;
364 struct lpc32xx_nand_host *host = chip->priv;
365
366 /* Direct device write with no ECC */
367 while (len-- > 0)
368 writel((uint32_t)*buf++, SLC_DATA(host->io_base));
369}
370
371/*
Roland Stigge2944a442012-06-07 12:22:15 +0200372 * Read the OOB data from the device without ECC using FIFO method
373 */
374static int lpc32xx_nand_read_oob_syndrome(struct mtd_info *mtd,
375 struct nand_chip *chip, int page)
376{
377 chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
378 chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
379
380 return 0;
381}
382
383/*
384 * Write the OOB data to the device without ECC using FIFO method
385 */
386static int lpc32xx_nand_write_oob_syndrome(struct mtd_info *mtd,
387 struct nand_chip *chip, int page)
388{
389 int status;
390
391 chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
392 chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
393
394 /* Send command to program the OOB data */
395 chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
396
397 status = chip->waitfunc(mtd, chip);
398
399 return status & NAND_STATUS_FAIL ? -EIO : 0;
400}
401
402/*
403 * Fills in the ECC fields in the OOB buffer with the hardware generated ECC
404 */
405static void lpc32xx_slc_ecc_copy(uint8_t *spare, const uint32_t *ecc, int count)
406{
407 int i;
408
409 for (i = 0; i < (count * 3); i += 3) {
410 uint32_t ce = ecc[i / 3];
411 ce = ~(ce << 2) & 0xFFFFFF;
412 spare[i + 2] = (uint8_t)(ce & 0xFF);
413 ce >>= 8;
414 spare[i + 1] = (uint8_t)(ce & 0xFF);
415 ce >>= 8;
416 spare[i] = (uint8_t)(ce & 0xFF);
417 }
418}
419
420static void lpc32xx_dma_complete_func(void *completion)
421{
422 complete(completion);
423}
424
425static int lpc32xx_xmit_dma(struct mtd_info *mtd, dma_addr_t dma,
426 void *mem, int len, enum dma_transfer_direction dir)
427{
428 struct nand_chip *chip = mtd->priv;
429 struct lpc32xx_nand_host *host = chip->priv;
430 struct dma_async_tx_descriptor *desc;
431 int flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
432 int res;
433
434 host->dma_slave_config.direction = dir;
435 host->dma_slave_config.src_addr = dma;
436 host->dma_slave_config.dst_addr = dma;
437 host->dma_slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
438 host->dma_slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
439 host->dma_slave_config.src_maxburst = 4;
440 host->dma_slave_config.dst_maxburst = 4;
441 /* DMA controller does flow control: */
442 host->dma_slave_config.device_fc = false;
443 if (dmaengine_slave_config(host->dma_chan, &host->dma_slave_config)) {
444 dev_err(mtd->dev.parent, "Failed to setup DMA slave\n");
445 return -ENXIO;
446 }
447
448 sg_init_one(&host->sgl, mem, len);
449
450 res = dma_map_sg(host->dma_chan->device->dev, &host->sgl, 1,
451 DMA_BIDIRECTIONAL);
452 if (res != 1) {
453 dev_err(mtd->dev.parent, "Failed to map sg list\n");
454 return -ENXIO;
455 }
456 desc = dmaengine_prep_slave_sg(host->dma_chan, &host->sgl, 1, dir,
457 flags);
458 if (!desc) {
459 dev_err(mtd->dev.parent, "Failed to prepare slave sg\n");
460 goto out1;
461 }
462
463 init_completion(&host->comp);
464 desc->callback = lpc32xx_dma_complete_func;
465 desc->callback_param = &host->comp;
466
467 dmaengine_submit(desc);
468 dma_async_issue_pending(host->dma_chan);
469
470 wait_for_completion_timeout(&host->comp, msecs_to_jiffies(1000));
471
472 dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
473 DMA_BIDIRECTIONAL);
474
475 return 0;
476out1:
477 dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
478 DMA_BIDIRECTIONAL);
479 return -ENXIO;
480}
481
482/*
483 * DMA read/write transfers with ECC support
484 */
485static int lpc32xx_xfer(struct mtd_info *mtd, uint8_t *buf, int eccsubpages,
486 int read)
487{
488 struct nand_chip *chip = mtd->priv;
489 struct lpc32xx_nand_host *host = chip->priv;
490 int i, status = 0;
491 unsigned long timeout;
492 int res;
493 enum dma_transfer_direction dir =
494 read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
495 uint8_t *dma_buf;
496 bool dma_mapped;
497
498 if ((void *)buf <= high_memory) {
499 dma_buf = buf;
500 dma_mapped = true;
501 } else {
502 dma_buf = host->data_buf;
503 dma_mapped = false;
504 if (!read)
505 memcpy(host->data_buf, buf, mtd->writesize);
506 }
507
508 if (read) {
509 writel(readl(SLC_CFG(host->io_base)) |
510 SLCCFG_DMA_DIR | SLCCFG_ECC_EN | SLCCFG_DMA_ECC |
511 SLCCFG_DMA_BURST, SLC_CFG(host->io_base));
512 } else {
513 writel((readl(SLC_CFG(host->io_base)) |
514 SLCCFG_ECC_EN | SLCCFG_DMA_ECC | SLCCFG_DMA_BURST) &
515 ~SLCCFG_DMA_DIR,
516 SLC_CFG(host->io_base));
517 }
518
519 /* Clear initial ECC */
520 writel(SLCCTRL_ECC_CLEAR, SLC_CTRL(host->io_base));
521
522 /* Transfer size is data area only */
523 writel(mtd->writesize, SLC_TC(host->io_base));
524
525 /* Start transfer in the NAND controller */
526 writel(readl(SLC_CTRL(host->io_base)) | SLCCTRL_DMA_START,
527 SLC_CTRL(host->io_base));
528
529 for (i = 0; i < chip->ecc.steps; i++) {
530 /* Data */
531 res = lpc32xx_xmit_dma(mtd, SLC_DMA_DATA(host->io_base_dma),
532 dma_buf + i * chip->ecc.size,
533 mtd->writesize / chip->ecc.steps, dir);
534 if (res)
535 return res;
536
537 /* Always _read_ ECC */
538 if (i == chip->ecc.steps - 1)
539 break;
540 if (!read) /* ECC availability delayed on write */
541 udelay(10);
542 res = lpc32xx_xmit_dma(mtd, SLC_ECC(host->io_base_dma),
543 &host->ecc_buf[i], 4, DMA_DEV_TO_MEM);
544 if (res)
545 return res;
546 }
547
548 /*
549 * According to NXP, the DMA can be finished here, but the NAND
550 * controller may still have buffered data. After porting to using the
551 * dmaengine DMA driver (amba-pl080), the condition (DMA_FIFO empty)
552 * appears to be always true, according to tests. Keeping the check for
553 * safety reasons for now.
554 */
555 if (readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO) {
556 dev_warn(mtd->dev.parent, "FIFO not empty!\n");
557 timeout = jiffies + msecs_to_jiffies(LPC32XX_DMA_TIMEOUT);
558 while ((readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO) &&
559 time_before(jiffies, timeout))
560 cpu_relax();
561 if (!time_before(jiffies, timeout)) {
562 dev_err(mtd->dev.parent, "FIFO held data too long\n");
563 status = -EIO;
564 }
565 }
566
567 /* Read last calculated ECC value */
568 if (!read)
569 udelay(10);
570 host->ecc_buf[chip->ecc.steps - 1] =
571 readl(SLC_ECC(host->io_base));
572
573 /* Flush DMA */
574 dmaengine_terminate_all(host->dma_chan);
575
576 if (readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO ||
577 readl(SLC_TC(host->io_base))) {
578 /* Something is left in the FIFO, something is wrong */
579 dev_err(mtd->dev.parent, "DMA FIFO failure\n");
580 status = -EIO;
581 }
582
583 /* Stop DMA & HW ECC */
584 writel(readl(SLC_CTRL(host->io_base)) & ~SLCCTRL_DMA_START,
585 SLC_CTRL(host->io_base));
586 writel(readl(SLC_CFG(host->io_base)) &
587 ~(SLCCFG_DMA_DIR | SLCCFG_ECC_EN | SLCCFG_DMA_ECC |
588 SLCCFG_DMA_BURST), SLC_CFG(host->io_base));
589
590 if (!dma_mapped && read)
591 memcpy(buf, host->data_buf, mtd->writesize);
592
593 return status;
594}
595
596/*
597 * Read the data and OOB data from the device, use ECC correction with the
598 * data, disable ECC for the OOB data
599 */
600static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd,
601 struct nand_chip *chip, uint8_t *buf,
602 int oob_required, int page)
603{
604 struct lpc32xx_nand_host *host = chip->priv;
605 int stat, i, status;
606 uint8_t *oobecc, tmpecc[LPC32XX_ECC_SAVE_SIZE];
607
608 /* Issue read command */
609 chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
610
611 /* Read data and oob, calculate ECC */
612 status = lpc32xx_xfer(mtd, buf, chip->ecc.steps, 1);
613
614 /* Get OOB data */
615 chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
616
617 /* Convert to stored ECC format */
618 lpc32xx_slc_ecc_copy(tmpecc, (uint32_t *) host->ecc_buf, chip->ecc.steps);
619
620 /* Pointer to ECC data retrieved from NAND spare area */
621 oobecc = chip->oob_poi + chip->ecc.layout->eccpos[0];
622
623 for (i = 0; i < chip->ecc.steps; i++) {
624 stat = chip->ecc.correct(mtd, buf, oobecc,
625 &tmpecc[i * chip->ecc.bytes]);
626 if (stat < 0)
627 mtd->ecc_stats.failed++;
628 else
629 mtd->ecc_stats.corrected += stat;
630
631 buf += chip->ecc.size;
632 oobecc += chip->ecc.bytes;
633 }
634
635 return status;
636}
637
638/*
639 * Read the data and OOB data from the device, no ECC correction with the
640 * data or OOB data
641 */
642static int lpc32xx_nand_read_page_raw_syndrome(struct mtd_info *mtd,
643 struct nand_chip *chip,
644 uint8_t *buf, int oob_required,
645 int page)
646{
647 /* Issue read command */
648 chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
649
650 /* Raw reads can just use the FIFO interface */
651 chip->read_buf(mtd, buf, chip->ecc.size * chip->ecc.steps);
652 chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
653
654 return 0;
655}
656
657/*
658 * Write the data and OOB data to the device, use ECC with the data,
659 * disable ECC for the OOB data
660 */
661static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
662 struct nand_chip *chip,
663 const uint8_t *buf, int oob_required)
664{
665 struct lpc32xx_nand_host *host = chip->priv;
666 uint8_t *pb = chip->oob_poi + chip->ecc.layout->eccpos[0];
667 int error;
668
669 /* Write data, calculate ECC on outbound data */
670 error = lpc32xx_xfer(mtd, (uint8_t *)buf, chip->ecc.steps, 0);
671 if (error)
672 return error;
673
674 /*
675 * The calculated ECC needs some manual work done to it before
676 * committing it to NAND. Process the calculated ECC and place
677 * the resultant values directly into the OOB buffer. */
678 lpc32xx_slc_ecc_copy(pb, (uint32_t *)host->ecc_buf, chip->ecc.steps);
679
680 /* Write ECC data to device */
681 chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
682 return 0;
683}
684
685/*
686 * Write the data and OOB data to the device, no ECC correction with the
687 * data or OOB data
688 */
689static int lpc32xx_nand_write_page_raw_syndrome(struct mtd_info *mtd,
690 struct nand_chip *chip,
691 const uint8_t *buf,
692 int oob_required)
693{
694 /* Raw writes can just use the FIFO interface */
695 chip->write_buf(mtd, buf, chip->ecc.size * chip->ecc.steps);
696 chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
697 return 0;
698}
699
Roland Stigge2944a442012-06-07 12:22:15 +0200700static int lpc32xx_nand_dma_setup(struct lpc32xx_nand_host *host)
701{
702 struct mtd_info *mtd = &host->mtd;
703 dma_cap_mask_t mask;
704
Roland Stiggede20c222012-08-16 15:15:34 +0200705 if (!host->pdata || !host->pdata->dma_filter) {
706 dev_err(mtd->dev.parent, "no DMA platform data\n");
707 return -ENOENT;
708 }
709
Roland Stigge2944a442012-06-07 12:22:15 +0200710 dma_cap_zero(mask);
711 dma_cap_set(DMA_SLAVE, mask);
Roland Stiggede20c222012-08-16 15:15:34 +0200712 host->dma_chan = dma_request_channel(mask, host->pdata->dma_filter,
713 "nand-slc");
Roland Stigge2944a442012-06-07 12:22:15 +0200714 if (!host->dma_chan) {
715 dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
716 return -EBUSY;
717 }
718
719 return 0;
720}
721
Roland Stigge2944a442012-06-07 12:22:15 +0200722static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
723{
Roland Stigge10594f62012-08-24 15:06:51 +0200724 struct lpc32xx_nand_cfg_slc *ncfg;
Roland Stigge2944a442012-06-07 12:22:15 +0200725 struct device_node *np = dev->of_node;
726
Roland Stigge10594f62012-08-24 15:06:51 +0200727 ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL);
Jingoo Han8ecb66b2013-12-26 12:18:56 +0900728 if (!ncfg)
Roland Stigge2944a442012-06-07 12:22:15 +0200729 return NULL;
Roland Stigge2944a442012-06-07 12:22:15 +0200730
Roland Stigge10594f62012-08-24 15:06:51 +0200731 of_property_read_u32(np, "nxp,wdr-clks", &ncfg->wdr_clks);
732 of_property_read_u32(np, "nxp,wwidth", &ncfg->wwidth);
733 of_property_read_u32(np, "nxp,whold", &ncfg->whold);
734 of_property_read_u32(np, "nxp,wsetup", &ncfg->wsetup);
735 of_property_read_u32(np, "nxp,rdr-clks", &ncfg->rdr_clks);
736 of_property_read_u32(np, "nxp,rwidth", &ncfg->rwidth);
737 of_property_read_u32(np, "nxp,rhold", &ncfg->rhold);
738 of_property_read_u32(np, "nxp,rsetup", &ncfg->rsetup);
Roland Stigge2944a442012-06-07 12:22:15 +0200739
Roland Stigge10594f62012-08-24 15:06:51 +0200740 if (!ncfg->wdr_clks || !ncfg->wwidth || !ncfg->whold ||
741 !ncfg->wsetup || !ncfg->rdr_clks || !ncfg->rwidth ||
742 !ncfg->rhold || !ncfg->rsetup) {
Roland Stigge2944a442012-06-07 12:22:15 +0200743 dev_err(dev, "chip parameters not specified correctly\n");
744 return NULL;
745 }
746
Roland Stigge10594f62012-08-24 15:06:51 +0200747 ncfg->use_bbt = of_get_nand_on_flash_bbt(np);
748 ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
Roland Stigge2944a442012-06-07 12:22:15 +0200749
Roland Stigge10594f62012-08-24 15:06:51 +0200750 return ncfg;
Roland Stigge2944a442012-06-07 12:22:15 +0200751}
Roland Stigge2944a442012-06-07 12:22:15 +0200752
753/*
754 * Probe for NAND controller
755 */
Bill Pemberton06f25512012-11-19 13:23:07 -0500756static int lpc32xx_nand_probe(struct platform_device *pdev)
Roland Stigge2944a442012-06-07 12:22:15 +0200757{
758 struct lpc32xx_nand_host *host;
759 struct mtd_info *mtd;
760 struct nand_chip *chip;
761 struct resource *rc;
762 struct mtd_part_parser_data ppdata = {};
763 int res;
764
765 rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
766 if (rc == NULL) {
767 dev_err(&pdev->dev, "No memory resource found for device\n");
768 return -EBUSY;
769 }
770
771 /* Allocate memory for the device structure (and zero it) */
772 host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
Jingoo Han8ecb66b2013-12-26 12:18:56 +0900773 if (!host)
Roland Stigge2944a442012-06-07 12:22:15 +0200774 return -ENOMEM;
Roland Stigge2944a442012-06-07 12:22:15 +0200775 host->io_base_dma = rc->start;
776
Thierry Redingb0de7742013-01-21 11:09:12 +0100777 host->io_base = devm_ioremap_resource(&pdev->dev, rc);
778 if (IS_ERR(host->io_base))
779 return PTR_ERR(host->io_base);
Roland Stigge2944a442012-06-07 12:22:15 +0200780
781 if (pdev->dev.of_node)
782 host->ncfg = lpc32xx_parse_dt(&pdev->dev);
Roland Stigge2944a442012-06-07 12:22:15 +0200783 if (!host->ncfg) {
Roland Stigge10594f62012-08-24 15:06:51 +0200784 dev_err(&pdev->dev,
785 "Missing or bad NAND config from device tree\n");
Roland Stigge2944a442012-06-07 12:22:15 +0200786 return -ENOENT;
787 }
Roland Stigged5842ab2012-06-27 17:51:15 +0200788 if (host->ncfg->wp_gpio == -EPROBE_DEFER)
789 return -EPROBE_DEFER;
Jingoo Han133432a2013-12-26 10:44:30 +0900790 if (gpio_is_valid(host->ncfg->wp_gpio) && devm_gpio_request(&pdev->dev,
791 host->ncfg->wp_gpio, "NAND WP")) {
Roland Stigge2944a442012-06-07 12:22:15 +0200792 dev_err(&pdev->dev, "GPIO not available\n");
793 return -EBUSY;
794 }
795 lpc32xx_wp_disable(host);
796
Jingoo Han453810b2013-07-30 17:18:33 +0900797 host->pdata = dev_get_platdata(&pdev->dev);
Roland Stiggede20c222012-08-16 15:15:34 +0200798
Roland Stigge2944a442012-06-07 12:22:15 +0200799 mtd = &host->mtd;
800 chip = &host->nand_chip;
801 chip->priv = host;
802 mtd->priv = chip;
803 mtd->owner = THIS_MODULE;
804 mtd->dev.parent = &pdev->dev;
805
806 /* Get NAND clock */
Jingoo Han133432a2013-12-26 10:44:30 +0900807 host->clk = devm_clk_get(&pdev->dev, NULL);
Roland Stigge2944a442012-06-07 12:22:15 +0200808 if (IS_ERR(host->clk)) {
809 dev_err(&pdev->dev, "Clock failure\n");
810 res = -ENOENT;
811 goto err_exit1;
812 }
813 clk_enable(host->clk);
814
815 /* Set NAND IO addresses and command/ready functions */
816 chip->IO_ADDR_R = SLC_DATA(host->io_base);
817 chip->IO_ADDR_W = SLC_DATA(host->io_base);
818 chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl;
819 chip->dev_ready = lpc32xx_nand_device_ready;
820 chip->chip_delay = 20; /* 20us command delay time */
821
822 /* Init NAND controller */
823 lpc32xx_nand_setup(host);
824
825 platform_set_drvdata(pdev, host);
826
827 /* NAND callbacks for LPC32xx SLC hardware */
828 chip->ecc.mode = NAND_ECC_HW_SYNDROME;
829 chip->read_byte = lpc32xx_nand_read_byte;
830 chip->read_buf = lpc32xx_nand_read_buf;
831 chip->write_buf = lpc32xx_nand_write_buf;
832 chip->ecc.read_page_raw = lpc32xx_nand_read_page_raw_syndrome;
833 chip->ecc.read_page = lpc32xx_nand_read_page_syndrome;
834 chip->ecc.write_page_raw = lpc32xx_nand_write_page_raw_syndrome;
835 chip->ecc.write_page = lpc32xx_nand_write_page_syndrome;
836 chip->ecc.write_oob = lpc32xx_nand_write_oob_syndrome;
837 chip->ecc.read_oob = lpc32xx_nand_read_oob_syndrome;
838 chip->ecc.calculate = lpc32xx_nand_ecc_calculate;
839 chip->ecc.correct = nand_correct_data;
840 chip->ecc.strength = 1;
841 chip->ecc.hwctl = lpc32xx_nand_ecc_enable;
Roland Stigge2944a442012-06-07 12:22:15 +0200842
Roland Stigge2944a442012-06-07 12:22:15 +0200843 /*
844 * Allocate a large enough buffer for a single huge page plus
845 * extra space for the spare area and ECC storage area
846 */
847 host->dma_buf_len = LPC32XX_DMA_DATA_SIZE + LPC32XX_ECC_SAVE_SIZE;
848 host->data_buf = devm_kzalloc(&pdev->dev, host->dma_buf_len,
849 GFP_KERNEL);
850 if (host->data_buf == NULL) {
Roland Stigge2944a442012-06-07 12:22:15 +0200851 res = -ENOMEM;
852 goto err_exit2;
853 }
854
855 res = lpc32xx_nand_dma_setup(host);
856 if (res) {
857 res = -EIO;
858 goto err_exit2;
859 }
860
861 /* Find NAND device */
862 if (nand_scan_ident(mtd, 1, NULL)) {
863 res = -ENXIO;
864 goto err_exit3;
865 }
866
867 /* OOB and ECC CPU and DMA work areas */
868 host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
869
870 /*
871 * Small page FLASH has a unique OOB layout, but large and huge
872 * page FLASH use the standard layout. Small page FLASH uses a
873 * custom BBT marker layout.
874 */
875 if (mtd->writesize <= 512)
876 chip->ecc.layout = &lpc32xx_nand_oob_16;
877
878 /* These sizes remain the same regardless of page size */
879 chip->ecc.size = 256;
880 chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
881 chip->ecc.prepad = chip->ecc.postpad = 0;
882
883 /* Avoid extra scan if using BBT, setup BBT support */
884 if (host->ncfg->use_bbt) {
Roland Stigge2944a442012-06-07 12:22:15 +0200885 chip->bbt_options |= NAND_BBT_USE_FLASH;
886
887 /*
888 * Use a custom BBT marker setup for small page FLASH that
889 * won't interfere with the ECC layout. Large and huge page
890 * FLASH use the standard layout.
891 */
892 if (mtd->writesize <= 512) {
893 chip->bbt_td = &bbt_smallpage_main_descr;
894 chip->bbt_md = &bbt_smallpage_mirror_descr;
895 }
896 }
897
898 /*
899 * Fills out all the uninitialized function pointers with the defaults
900 */
901 if (nand_scan_tail(mtd)) {
902 res = -ENXIO;
903 goto err_exit3;
904 }
905
Roland Stigge2944a442012-06-07 12:22:15 +0200906 mtd->name = "nxp_lpc3220_slc";
907 ppdata.of_node = pdev->dev.of_node;
908 res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts,
909 host->ncfg->num_parts);
910 if (!res)
911 return res;
912
913 nand_release(mtd);
914
915err_exit3:
916 dma_release_channel(host->dma_chan);
917err_exit2:
918 clk_disable(host->clk);
Roland Stigge2944a442012-06-07 12:22:15 +0200919err_exit1:
920 lpc32xx_wp_enable(host);
Roland Stigge2944a442012-06-07 12:22:15 +0200921
922 return res;
923}
924
925/*
926 * Remove NAND device.
927 */
Bill Pemberton810b7e02012-11-19 13:26:04 -0500928static int lpc32xx_nand_remove(struct platform_device *pdev)
Roland Stigge2944a442012-06-07 12:22:15 +0200929{
930 uint32_t tmp;
931 struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
932 struct mtd_info *mtd = &host->mtd;
933
934 nand_release(mtd);
935 dma_release_channel(host->dma_chan);
936
937 /* Force CE high */
938 tmp = readl(SLC_CTRL(host->io_base));
939 tmp &= ~SLCCFG_CE_LOW;
940 writel(tmp, SLC_CTRL(host->io_base));
941
942 clk_disable(host->clk);
Roland Stigge2944a442012-06-07 12:22:15 +0200943 lpc32xx_wp_enable(host);
Roland Stigge2944a442012-06-07 12:22:15 +0200944
945 return 0;
946}
947
948#ifdef CONFIG_PM
949static int lpc32xx_nand_resume(struct platform_device *pdev)
950{
951 struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
952
953 /* Re-enable NAND clock */
954 clk_enable(host->clk);
955
956 /* Fresh init of NAND controller */
957 lpc32xx_nand_setup(host);
958
959 /* Disable write protect */
960 lpc32xx_wp_disable(host);
961
962 return 0;
963}
964
965static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm)
966{
967 uint32_t tmp;
968 struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
969
970 /* Force CE high */
971 tmp = readl(SLC_CTRL(host->io_base));
972 tmp &= ~SLCCFG_CE_LOW;
973 writel(tmp, SLC_CTRL(host->io_base));
974
975 /* Enable write protect for safety */
976 lpc32xx_wp_enable(host);
977
978 /* Disable clock */
979 clk_disable(host->clk);
980
981 return 0;
982}
983
984#else
985#define lpc32xx_nand_resume NULL
986#define lpc32xx_nand_suspend NULL
987#endif
988
Roland Stigge2944a442012-06-07 12:22:15 +0200989static const struct of_device_id lpc32xx_nand_match[] = {
990 { .compatible = "nxp,lpc3220-slc" },
991 { /* sentinel */ },
992};
993MODULE_DEVICE_TABLE(of, lpc32xx_nand_match);
Roland Stigge2944a442012-06-07 12:22:15 +0200994
995static struct platform_driver lpc32xx_nand_driver = {
996 .probe = lpc32xx_nand_probe,
Bill Pemberton5153b882012-11-19 13:21:24 -0500997 .remove = lpc32xx_nand_remove,
Roland Stigge2944a442012-06-07 12:22:15 +0200998 .resume = lpc32xx_nand_resume,
999 .suspend = lpc32xx_nand_suspend,
1000 .driver = {
1001 .name = LPC32XX_MODNAME,
1002 .owner = THIS_MODULE,
Sachin Kamatfea7b562013-09-30 15:10:23 +05301003 .of_match_table = lpc32xx_nand_match,
Roland Stigge2944a442012-06-07 12:22:15 +02001004 },
1005};
1006
1007module_platform_driver(lpc32xx_nand_driver);
1008
1009MODULE_LICENSE("GPL");
1010MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
1011MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
1012MODULE_DESCRIPTION("NAND driver for the NXP LPC32XX SLC controller");