blob: 52847eec7398cbda5b0ffe5c65446208bdd1008a [file] [log] [blame]
Roman Zippel80daa562008-01-14 04:51:16 +01001config ARCH
2 string
3 option env="ARCH"
4
5config KERNELVERSION
6 string
7 option env="KERNELVERSION"
8
Roman Zippelface4372006-06-08 22:12:45 -07009config DEFCONFIG_LIST
10 string
Paolo 'Blaisorblade' Giarrussob2670eac2006-10-19 23:28:23 -070011 depends on !UML
Roman Zippelface4372006-06-08 22:12:45 -070012 option defconfig_list
13 default "/lib/modules/$UNAME_RELEASE/.config"
14 default "/etc/kernel-config"
15 default "/boot/config-$UNAME_RELEASE"
Sam Ravnborg73531902008-05-25 23:03:18 +020016 default "$ARCH_DEFCONFIG"
Roman Zippelface4372006-06-08 22:12:45 -070017 default "arch/$ARCH/defconfig"
18
Al Boldiff0cfc62007-07-31 00:39:23 -070019menu "General setup"
Linus Torvalds1da177e2005-04-16 15:20:36 -070020
21config EXPERIMENTAL
22 bool "Prompt for development and/or incomplete code/drivers"
23 ---help---
24 Some of the various things that Linux supports (such as network
25 drivers, file systems, network protocols, etc.) can be in a state
26 of development where the functionality, stability, or the level of
27 testing is not yet high enough for general use. This is usually
28 known as the "alpha-test" phase among developers. If a feature is
29 currently in alpha-test, then the developers usually discourage
30 uninformed widespread use of this feature by the general public to
31 avoid "Why doesn't this work?" type mail messages. However, active
32 testing and use of these systems is welcomed. Just be aware that it
33 may not meet the normal level of reliability or it may fail to work
34 in some special cases. Detailed bug reports from people familiar
35 with the kernel internals are usually welcomed by the developers
36 (before submitting bug reports, please read the documents
37 <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
38 <file:Documentation/BUG-HUNTING>, and
39 <file:Documentation/oops-tracing.txt> in the kernel source).
40
41 This option will also make obsoleted drivers available. These are
42 drivers that have been replaced by something else, and/or are
43 scheduled to be removed in a future kernel release.
44
45 Unless you intend to help test and develop a feature or driver that
46 falls into this category, or you have a situation that requires
47 using these features, you should probably say N here, which will
48 cause the configurator to present you with fewer choices. If
49 you say Y here, you will be offered the choice of using features or
50 drivers that are currently considered to be in the alpha-test phase.
51
Linus Torvalds1da177e2005-04-16 15:20:36 -070052config BROKEN
53 bool
Linus Torvalds1da177e2005-04-16 15:20:36 -070054
55config BROKEN_ON_SMP
56 bool
57 depends on BROKEN || !SMP
58 default y
59
60config LOCK_KERNEL
61 bool
62 depends on SMP || PREEMPT
63 default y
64
65config INIT_ENV_ARG_LIMIT
66 int
Adrian Bunkdd673bc2006-06-30 01:55:51 -070067 default 32 if !UML
68 default 128 if UML
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 help
Randy Dunlap34ad92c2005-10-30 15:01:46 -080070 Maximum of each of the number of arguments and environment
71 variables passed to init from the kernel command line.
Linus Torvalds1da177e2005-04-16 15:20:36 -070072
Linus Torvalds1da177e2005-04-16 15:20:36 -070073
74config LOCALVERSION
75 string "Local version - append to kernel release"
76 help
77 Append an extra string to the end of your kernel version.
78 This will show up when you type uname, for example.
79 The string you set here will be appended after the contents of
80 any files with a filename matching localversion* in your
81 object and source tree, in that order. Your total string can
82 be a maximum of 64 characters.
83
Ryan Andersonaaebf432005-07-31 04:57:49 -040084config LOCALVERSION_AUTO
85 bool "Automatically append version information to the version string"
86 default y
87 help
88 This will try to automatically determine if the current tree is a
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020089 release tree by looking for git tags that belong to the current
90 top of tree revision.
Ryan Andersonaaebf432005-07-31 04:57:49 -040091
92 A string of the format -gxxxxxxxx will be added to the localversion
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020093 if a git-based tree is found. The string generated by this will be
Ryan Andersonaaebf432005-07-31 04:57:49 -040094 appended after any matching localversion* files, and after the value
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020095 set in CONFIG_LOCALVERSION.
Ryan Andersonaaebf432005-07-31 04:57:49 -040096
Robert P. J. Day6e5a5422007-05-01 23:08:11 +020097 (The actual string used here is the first eight characters produced
98 by running the command:
99
100 $ git rev-parse --verify HEAD
101
102 which is done within the script "scripts/setlocalversion".)
Ryan Andersonaaebf432005-07-31 04:57:49 -0400103
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104config SWAP
105 bool "Support for paging of anonymous memory (swap)"
David Howells93614012006-09-30 20:45:40 +0200106 depends on MMU && BLOCK
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107 default y
108 help
109 This option allows you to choose whether you want to have support
Jesper Juhl92c35042006-01-15 02:40:08 +0100110 for so called swap devices or swap files in your kernel that are
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111 used to provide more virtual memory than the actual RAM present
112 in your computer. If unsure say Y.
113
114config SYSVIPC
115 bool "System V IPC"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700116 ---help---
117 Inter Process Communication is a suite of library functions and
118 system calls which let processes (running programs) synchronize and
119 exchange information. It is generally considered to be a good thing,
120 and some programs won't run unless you say Y here. In particular, if
121 you want to run the DOS emulator dosemu under Linux (read the
122 DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
123 you'll need to say Y here.
124
125 You can find documentation about IPC with "info ipc" and also in
126 section 6.4 of the Linux Programmer's Guide, available from
127 <http://www.tldp.org/guides.html>.
128
Eric W. Biedermana5494dc2007-02-14 00:34:06 -0800129config SYSVIPC_SYSCTL
130 bool
131 depends on SYSVIPC
132 depends on SYSCTL
133 default y
134
Linus Torvalds1da177e2005-04-16 15:20:36 -0700135config POSIX_MQUEUE
136 bool "POSIX Message Queues"
137 depends on NET && EXPERIMENTAL
138 ---help---
139 POSIX variant of message queues is a part of IPC. In POSIX message
140 queues every message has a priority which decides about succession
141 of receiving it by a process. If you want to compile and run
142 programs written e.g. for Solaris with use of its POSIX message
Robert P. J. Dayb0e37652007-05-09 07:25:13 +0200143 queues (functions mq_*) say Y here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144
145 POSIX message queues are visible as a filesystem called 'mqueue'
146 and can be mounted somewhere if you want to do filesystem
147 operations on message queues.
148
149 If unsure, say Y.
150
151config BSD_PROCESS_ACCT
152 bool "BSD Process Accounting"
153 help
154 If you say Y here, a user level program will be able to instruct the
155 kernel (via a special system call) to write process accounting
156 information to a file: whenever a process exits, information about
157 that process will be appended to the file by the kernel. The
158 information includes things such as creation time, owning user,
159 command name, memory usage, controlling terminal etc. (the complete
160 list is in the struct acct in <file:include/linux/acct.h>). It is
161 up to the user level program to do useful things with this
162 information. This is generally a good idea, so say Y.
163
164config BSD_PROCESS_ACCT_V3
165 bool "BSD Process Accounting version 3 file format"
166 depends on BSD_PROCESS_ACCT
167 default n
168 help
169 If you say Y here, the process accounting information is written
170 in a new file format that also logs the process IDs of each
171 process and it's parent. Note that this file format is incompatible
172 with previous v0/v1/v2 file formats, so you will need updated tools
173 for processing it. A preliminary version of these tools is available
S.Çağlar Onur37a4c942008-06-18 11:45:13 +0300174 at <http://www.gnu.org/software/acct/>.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700175
Shailabh Nagarc7572492006-07-14 00:24:40 -0700176config TASKSTATS
177 bool "Export task/process statistics through netlink (EXPERIMENTAL)"
178 depends on NET
179 default n
180 help
181 Export selected statistics for tasks/processes through the
182 generic netlink interface. Unlike BSD process accounting, the
183 statistics are available during the lifetime of tasks/processes as
184 responses to commands. Like BSD accounting, they are sent to user
185 space on task exit.
186
187 Say N if unsure.
188
Shailabh Nagarca74e922006-07-14 00:24:36 -0700189config TASK_DELAY_ACCT
190 bool "Enable per-task delay accounting (EXPERIMENTAL)"
Shailabh Nagar6f449932006-07-14 00:24:41 -0700191 depends on TASKSTATS
Shailabh Nagarca74e922006-07-14 00:24:36 -0700192 help
193 Collect information on time spent by a task waiting for system
194 resources like cpu, synchronous block I/O completion and swapping
195 in pages. Such statistics can help in setting a task's priorities
196 relative to other tasks for cpu, io, rss limits etc.
197
198 Say N if unsure.
199
Alexey Dobriyan18f705f2007-02-10 01:46:44 -0800200config TASK_XACCT
201 bool "Enable extended accounting over taskstats (EXPERIMENTAL)"
202 depends on TASKSTATS
203 help
204 Collect extended task accounting data and send the data
205 to userland for processing over the taskstats interface.
206
207 Say N if unsure.
208
209config TASK_IO_ACCOUNTING
210 bool "Enable per-task storage I/O accounting (EXPERIMENTAL)"
211 depends on TASK_XACCT
212 help
213 Collect information on the number of bytes of storage I/O which this
214 task has caused.
215
216 Say N if unsure.
217
Linus Torvalds1da177e2005-04-16 15:20:36 -0700218config AUDIT
219 bool "Auditing support"
Chris Wright804a6a492005-05-11 10:52:45 +0100220 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700221 help
222 Enable auditing infrastructure that can be used with another
223 kernel subsystem, such as SELinux (which requires this for
224 logging of avc messages output). Does not do system-call
225 auditing without CONFIG_AUDITSYSCALL.
226
227config AUDITSYSCALL
228 bool "Enable system-call auditing support"
Yuichi Nakamura1322b9d2007-11-10 19:21:34 +0900229 depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700230 default y if SECURITY_SELINUX
231 help
232 Enable low-overhead system-call auditing infrastructure that
233 can be used independently or with another kernel subsystem,
Amy Griffisf368c07d2006-04-07 16:55:56 -0400234 such as SELinux. To use audit's filesystem watch feature, please
235 ensure that INOTIFY is configured.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700236
Al Viro74c3cbe2007-07-22 08:04:18 -0400237config AUDIT_TREE
238 def_bool y
239 depends on AUDITSYSCALL && INOTIFY
240
Linus Torvalds1da177e2005-04-16 15:20:36 -0700241config IKCONFIG
Ross Birof2443ab2006-09-30 23:27:25 -0700242 tristate "Kernel .config support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700243 ---help---
244 This option enables the complete Linux kernel ".config" file
245 contents to be saved in the kernel. It provides documentation
246 of which kernel options are used in a running kernel or in an
247 on-disk kernel. This information can be extracted from the kernel
248 image file with the script scripts/extract-ikconfig and used as
249 input to rebuild the current kernel or to build another kernel.
250 It can also be extracted from a running kernel by reading
251 /proc/config.gz if enabled (below).
252
253config IKCONFIG_PROC
254 bool "Enable access to .config through /proc/config.gz"
255 depends on IKCONFIG && PROC_FS
256 ---help---
257 This option enables access to the kernel configuration file
258 through /proc/config.gz.
259
Alistair John Strachan794543a2007-05-08 00:31:15 -0700260config LOG_BUF_SHIFT
261 int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
262 range 12 21
Adrian Bunkf17a32e2008-04-29 00:58:58 -0700263 default 17
Alistair John Strachan794543a2007-05-08 00:31:15 -0700264 help
265 Select kernel log buffer size as a power of 2.
Adrian Bunkf17a32e2008-04-29 00:58:58 -0700266 Examples:
267 17 => 128 KB
268 16 => 64 KB
269 15 => 32 KB
270 14 => 16 KB
Alistair John Strachan794543a2007-05-08 00:31:15 -0700271 13 => 8 KB
272 12 => 4 KB
273
Paul Menageddbcc7e2007-10-18 23:39:30 -0700274config CGROUPS
275 bool "Control Group support"
276 help
277 This option will let you use process cgroup subsystems
278 such as Cpusets
279
280 Say N if unsure.
281
Paul Menage006cb992007-10-18 23:39:43 -0700282config CGROUP_DEBUG
283 bool "Example debug cgroup subsystem"
284 depends on CGROUPS
Paul Menage418d7d82008-04-29 01:00:05 -0700285 default n
Paul Menage006cb992007-10-18 23:39:43 -0700286 help
287 This option enables a simple cgroup subsystem that
288 exports useful debugging information about the cgroups
289 framework
290
291 Say N if unsure
292
Serge E. Hallyn858d72e2007-10-18 23:39:45 -0700293config CGROUP_NS
294 bool "Namespace cgroup subsystem"
295 depends on CGROUPS
296 help
297 Provides a simple namespace cgroup subsystem to
298 provide hierarchical naming of sets of namespaces,
299 for instance virtual servers and checkpoint/restart
300 jobs.
301
Matt Helsleydc52ddc2008-10-18 20:27:21 -0700302config CGROUP_FREEZER
303 bool "control group freezer subsystem"
304 depends on CGROUPS
305 help
306 Provides a way to freeze and unfreeze all tasks in a
307 cgroup.
308
Serge E. Hallyn08ce5f12008-04-29 01:00:10 -0700309config CGROUP_DEVICE
310 bool "Device controller for cgroups"
311 depends on CGROUPS && EXPERIMENTAL
312 help
313 Provides a cgroup implementing whitelists for devices which
314 a process in the cgroup can mknod or open.
315
Linus Torvalds1da177e2005-04-16 15:20:36 -0700316config CPUSETS
317 bool "Cpuset support"
Paul Menage8793d852007-10-18 23:39:39 -0700318 depends on SMP && CGROUPS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700319 help
Randy Dunlapd9fd8a62005-07-27 11:45:11 -0700320 This option will let you create and manage CPUSETs which
Linus Torvalds1da177e2005-04-16 15:20:36 -0700321 allow dynamically partitioning a system into sets of CPUs and
322 Memory Nodes and assigning tasks to run only within those sets.
323 This is primarily useful on large SMP or NUMA systems.
324
325 Say N if unsure.
326
Ingo Molnara5574cf2008-05-05 23:19:50 +0200327#
328# Architectures with an unreliable sched_clock() should select this:
329#
330config HAVE_UNSTABLE_SCHED_CLOCK
331 bool
332
Peter Zijlstra052f1dc2008-02-13 15:45:40 +0100333config GROUP_SCHED
334 bool "Group CPU scheduler"
Parag Warudkaraac6abc2008-05-03 20:42:34 -0400335 depends on EXPERIMENTAL
336 default n
Srivatsa Vaddagiri29f59db2007-10-15 17:00:07 +0200337 help
Srivatsa Vaddagirifb615582007-10-15 17:00:12 +0200338 This feature lets CPU scheduler recognize task groups and control CPU
Srivatsa Vaddagiri9b5b7752007-10-15 17:00:09 +0200339 bandwidth allocation to such task groups.
Srivatsa Vaddagiri29f59db2007-10-15 17:00:07 +0200340
Peter Zijlstra052f1dc2008-02-13 15:45:40 +0100341config FAIR_GROUP_SCHED
342 bool "Group scheduling for SCHED_OTHER"
343 depends on GROUP_SCHED
Parag Warudkaraac6abc2008-05-03 20:42:34 -0400344 default GROUP_SCHED
Srivatsa Vaddagiri24e377a2007-10-15 17:00:09 +0200345
Peter Zijlstra052f1dc2008-02-13 15:45:40 +0100346config RT_GROUP_SCHED
347 bool "Group scheduling for SCHED_RR/FIFO"
348 depends on EXPERIMENTAL
349 depends on GROUP_SCHED
350 default n
Viktor Radnaib9b158f2008-04-19 19:45:01 +0200351 help
352 This feature lets you explicitly allocate real CPU bandwidth
353 to users or control groups (depending on the "Basis for grouping tasks"
354 setting below. If enabled, it will also make it impossible to
355 schedule realtime tasks for non-root users until you allocate
356 realtime bandwidth for them.
Adrian Knoth2fe401e2008-11-12 16:23:55 -0800357 See Documentation/scheduler/sched-rt-group.txt for more information.
Peter Zijlstra052f1dc2008-02-13 15:45:40 +0100358
359choice
360 depends on GROUP_SCHED
361 prompt "Basis for grouping tasks"
362 default USER_SCHED
363
364config USER_SCHED
Srivatsa Vaddagirifb615582007-10-15 17:00:12 +0200365 bool "user id"
366 help
367 This option will choose userid as the basis for grouping
368 tasks, thus providing equal CPU bandwidth to each user.
Srivatsa Vaddagiri24e377a2007-10-15 17:00:09 +0200369
Peter Zijlstra052f1dc2008-02-13 15:45:40 +0100370config CGROUP_SCHED
Srivatsa Vaddagiri68318b82007-10-18 23:41:03 -0700371 bool "Control groups"
372 depends on CGROUPS
373 help
374 This option allows you to create arbitrary task groups
375 using the "cgroup" pseudo filesystem and control
376 the cpu bandwidth allocated to each such task group.
377 Refer to Documentation/cgroups.txt for more information
378 on "cgroup" pseudo filesystem.
379
Srivatsa Vaddagiri24e377a2007-10-15 17:00:09 +0200380endchoice
381
Srivatsa Vaddagirid842de82007-12-02 20:04:49 +0100382config CGROUP_CPUACCT
383 bool "Simple CPU accounting cgroup subsystem"
384 depends on CGROUPS
385 help
386 Provides a simple Resource Controller for monitoring the
387 total CPU consumed by the tasks in a cgroup
388
Pavel Emelianove552b662008-02-07 00:13:49 -0800389config RESOURCE_COUNTERS
390 bool "Resource counters"
391 help
392 This option enables controller independent resource accounting
393 infrastructure that works with cgroups
394 depends on CGROUPS
395
Balbir Singhcf475ad2008-04-29 01:00:16 -0700396config MM_OWNER
397 bool
398
Balbir Singh00f0b822008-03-04 14:28:39 -0800399config CGROUP_MEM_RES_CTLR
400 bool "Memory Resource Controller for Control Groups"
401 depends on CGROUPS && RESOURCE_COUNTERS
Balbir Singhcf475ad2008-04-29 01:00:16 -0700402 select MM_OWNER
Balbir Singh00f0b822008-03-04 14:28:39 -0800403 help
KAMEZAWA Hiroyuki84ad6d72008-10-29 14:01:06 -0700404 Provides a memory resource controller that manages both anonymous
405 memory and page cache. (See Documentation/controllers/memory.txt)
Balbir Singh00f0b822008-03-04 14:28:39 -0800406
407 Note that setting this option increases fixed memory overhead
KAMEZAWA Hiroyuki84ad6d72008-10-29 14:01:06 -0700408 associated with each page of memory in the system. By this,
409 20(40)bytes/PAGE_SIZE on 32(64)bit system will be occupied by memory
410 usage tracking struct at boot. Total amount of this is printed out
411 at boot.
Balbir Singh00f0b822008-03-04 14:28:39 -0800412
413 Only enable when you're ok with these trade offs and really
KAMEZAWA Hiroyuki84ad6d72008-10-29 14:01:06 -0700414 sure you need the memory resource controller. Even when you enable
415 this, you can set "cgroup_disable=memory" at your boot option to
416 disable memory resource controller and you can avoid overheads.
417 (and lose benefits of memory resource contoller)
Balbir Singh00f0b822008-03-04 14:28:39 -0800418
Balbir Singhcf475ad2008-04-29 01:00:16 -0700419 This config option also selects MM_OWNER config option, which
420 could in turn add some fork/exit overhead.
421
Kay Sievers88a22c92006-09-14 11:23:28 +0200422config SYSFS_DEPRECATED
Ingo Molnard47846c2008-03-04 14:54:47 +0100423 bool
424
425config SYSFS_DEPRECATED_V2
Kay Sievers88a22c92006-09-14 11:23:28 +0200426 bool "Create deprecated sysfs files"
Randy Dunlap9148fe82007-12-31 10:05:34 -0800427 depends on SYSFS
Kay Sievers88a22c92006-09-14 11:23:28 +0200428 default y
Ingo Molnard47846c2008-03-04 14:54:47 +0100429 select SYSFS_DEPRECATED
Kay Sievers88a22c92006-09-14 11:23:28 +0200430 help
431 This option creates deprecated symlinks such as the
432 "device"-link, the <subsystem>:<name>-link, and the
433 "bus"-link. It may also add deprecated key in the
434 uevent environment.
435 None of these features or values should be used today, as
436 they export driver core implementation details to userspace
437 or export properties which can't be kept stable across kernel
438 releases.
439
440 If enabled, this option will also move any device structures
David Sterba3dde6ad2007-05-09 07:12:20 +0200441 that belong to a class, back into the /sys/class hierarchy, in
Greg Kroah-Hartman024440d2008-03-03 14:47:13 -0800442 order to support older versions of udev and some userspace
443 programs.
Kay Sievers88a22c92006-09-14 11:23:28 +0200444
Greg Kroah-Hartman024440d2008-03-03 14:47:13 -0800445 If you are using a distro with the most recent userspace
446 packages, it should be safe to say N here.
Kay Sievers88a22c92006-09-14 11:23:28 +0200447
Paul Menage8793d852007-10-18 23:39:39 -0700448config PROC_PID_CPUSET
449 bool "Include legacy /proc/<pid>/cpuset file"
450 depends on CPUSETS
451 default y
452
Jens Axboeb86ff9812006-03-23 19:56:55 +0100453config RELAY
454 bool "Kernel->user space relay support (formerly relayfs)"
455 help
456 This option enables support for relay interface support in
457 certain file systems (such as debugfs).
458 It is designed to provide an efficient mechanism for tools and
459 facilities to relay large amounts of data from kernel space to
460 user space.
461
462 If unsure, say N.
463
Pavel Emelyanovc5289a62008-02-08 04:18:19 -0800464config NAMESPACES
465 bool "Namespaces support" if EMBEDDED
466 default !EMBEDDED
467 help
468 Provides the way to make tasks work with different objects using
469 the same id. For example same IPC id may refer to different objects
470 or same user id or pid may refer to different tasks when used in
471 different namespaces.
472
Pavel Emelyanov58bfdd6d2008-02-08 04:18:21 -0800473config UTS_NS
474 bool "UTS namespace"
475 depends on NAMESPACES
476 help
477 In this namespace tasks see different info provided with the
478 uname() system call
479
Pavel Emelyanovae5e1b22008-02-08 04:18:22 -0800480config IPC_NS
481 bool "IPC namespace"
482 depends on NAMESPACES && SYSVIPC
483 help
484 In this namespace tasks work with IPC ids which correspond to
485 different IPC objects in different namespaces
486
Pavel Emelyanovaee16ce2008-02-08 04:18:23 -0800487config USER_NS
488 bool "User namespace (EXPERIMENTAL)"
489 depends on NAMESPACES && EXPERIMENTAL
490 help
491 This allows containers, i.e. vservers, to use user namespaces
492 to provide different user info for different servers.
493 If unsure, say N.
494
Pavel Emelyanov74bd59b2008-02-08 04:18:24 -0800495config PID_NS
496 bool "PID Namespaces (EXPERIMENTAL)"
497 default n
498 depends on NAMESPACES && EXPERIMENTAL
499 help
Heikki Orsila12d2b8f2008-07-06 15:48:02 +0300500 Support process id namespaces. This allows having multiple
Pavel Emelyanov74bd59b2008-02-08 04:18:24 -0800501 process with the same pid as long as they are in different
502 pid namespaces. This is a building block of containers.
503
504 Unless you want to work with an experimental feature
505 say N here.
506
Dimitri Gorokhovikf9916332007-03-06 01:42:17 -0800507config BLK_DEV_INITRD
508 bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
509 depends on BROKEN || !FRV
510 help
511 The initial RAM filesystem is a ramfs which is loaded by the
512 boot loader (loadlin or lilo) and that is mounted as root
513 before the normal boot procedure. It is typically used to
514 load modules needed to mount the "real" root file system,
515 etc. See <file:Documentation/initrd.txt> for details.
516
517 If RAM disk support (BLK_DEV_RAM) is also included, this
518 also enables initial RAM disk (initrd) support and adds
519 15 Kbytes (more on some other architectures) to the kernel size.
520
521 If unsure say Y.
522
Jean-Paul Samanc33df4e2007-02-10 01:44:43 -0800523if BLK_DEV_INITRD
524
Sam Ravnborgdbec4862005-08-10 20:44:50 +0200525source "usr/Kconfig"
526
Jean-Paul Samanc33df4e2007-02-10 01:44:43 -0800527endif
528
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800529config CC_OPTIMIZE_FOR_SIZE
Ingo Molnar96fffeb2008-04-28 01:39:43 +0200530 bool "Optimize for size"
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800531 default y
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800532 help
533 Enabling this option will pass "-Os" instead of "-O2" to gcc
534 resulting in a smaller kernel.
535
jkacur775a7222008-07-16 00:31:16 +0200536 If unsure, say Y.
Linus Torvaldsc45b4f12005-12-14 18:52:21 -0800537
Randy Dunlap08470622006-09-30 23:28:13 -0700538config SYSCTL
539 bool
540
Linus Torvalds1da177e2005-04-16 15:20:36 -0700541menuconfig EMBEDDED
542 bool "Configure standard kernel features (for small systems)"
543 help
544 This option allows certain base kernel options and settings
545 to be disabled or tweaked. This is for specialized
546 environments which can tolerate a "non-standard" kernel.
547 Only use this if you really know what you are doing.
548
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700549config UID16
550 bool "Enable 16-bit UID system calls" if EMBEDDED
David S. Miller09337f52008-04-26 03:17:12 -0700551 depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && COMPAT) || UML || (X86_64 && IA32_EMULATION)
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700552 default y
553 help
554 This enables the legacy 16-bit UID syscall wrappers.
555
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700556config SYSCTL_SYSCALL
Randy Dunlap08470622006-09-30 23:28:13 -0700557 bool "Sysctl syscall support" if EMBEDDED
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800558 default y
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700559 select SYSCTL
560 ---help---
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800561 sys_sysctl uses binary paths that have been found challenging
562 to properly maintain and use. The interface in /proc/sys
563 using paths with ascii names is now the primary path to this
564 information.
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700565
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800566 Almost nothing using the binary sysctl interface so if you are
567 trying to save some space it is probably safe to disable this,
568 making your kernel marginally smaller.
Eric W. Biedermanb89a8172006-09-27 01:51:04 -0700569
Eric W. Biederman13bb7e32006-11-08 17:44:51 -0800570 If unsure say Y here.
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700571
Linus Torvalds1da177e2005-04-16 15:20:36 -0700572config KALLSYMS
Jesper Juhl979c6a12006-12-12 19:25:11 +0100573 bool "Load all symbols for debugging/ksymoops" if EMBEDDED
Linus Torvalds1da177e2005-04-16 15:20:36 -0700574 default y
575 help
576 Say Y here to let the kernel print out symbolic crash information and
577 symbolic stack backtraces. This increases the size of the kernel
578 somewhat, as all symbols have to be loaded into the kernel image.
579
580config KALLSYMS_ALL
581 bool "Include all symbols in kallsyms"
582 depends on DEBUG_KERNEL && KALLSYMS
583 help
584 Normally kallsyms only contains the symbols of functions, for nicer
585 OOPS messages. Some debuggers can use kallsyms for other
Jesper Juhlf9f97bc2005-07-20 05:43:05 +0200586 symbols too: say Y here to include all symbols, if you need them
587 and you don't care about adding 300k to the size of your kernel.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700588
589 Say N.
590
Jan Beulich9bb48242008-12-16 11:30:08 +0000591config KALLSYMS_STRIP_GENERATED
592 bool "Strip machine generated symbols from kallsyms"
593 depends on KALLSYMS_ALL
594 default y
595 help
596 Say N if you want kallsyms to retain even machine generated symbols.
597
Linus Torvalds1da177e2005-04-16 15:20:36 -0700598config KALLSYMS_EXTRA_PASS
599 bool "Do an extra kallsyms pass"
600 depends on KALLSYMS
601 help
602 If kallsyms is not working correctly, the build will fail with
603 inconsistent kallsyms data. If that occurs, log a bug report and
604 turn on KALLSYMS_EXTRA_PASS which should result in a stable build.
605 Always say N here unless you find a bug in kallsyms, which must be
606 reported. KALLSYMS_EXTRA_PASS is only a temporary workaround while
607 you wait for kallsyms to be fixed.
608
Matt Mackalld59745c2005-05-01 08:59:02 -0700609
Greg Kroah-Hartman712f47c2005-11-16 11:27:07 -0800610config HOTPLUG
611 bool "Support for hot-pluggable devices" if EMBEDDED
612 default y
613 help
614 This option is provided for the case where no hotplug or uevent
615 capabilities is wanted by the kernel. You should only consider
616 disabling this option for embedded systems that do not use modules, a
617 dynamic /dev tree, or dynamic device discovery. Just say Y.
618
Matt Mackalld59745c2005-05-01 08:59:02 -0700619config PRINTK
620 default y
621 bool "Enable support for printk" if EMBEDDED
622 help
623 This option enables normal printk support. Removing it
624 eliminates most of the message strings from the kernel image
625 and makes the kernel more or less silent. As this makes it
626 very difficult to diagnose system problems, saying N here is
627 strongly discouraged.
628
Matt Mackallc8538a72005-05-01 08:59:01 -0700629config BUG
630 bool "BUG() support" if EMBEDDED
631 default y
632 help
633 Disabling this option eliminates support for BUG and WARN, reducing
634 the size of your kernel image and potentially quietly ignoring
635 numerous fatal conditions. You should only consider disabling this
636 option for embedded systems with no facilities for reporting errors.
637 Just say Y.
638
Matt Mackall708e9a72006-01-08 01:05:25 -0800639config ELF_CORE
640 default y
641 bool "Enable ELF core dumps" if EMBEDDED
642 help
643 Enable support for generating core dumps. Disabling saves about 4k.
644
Stas Sergeeve5e1d3c2008-05-07 12:39:56 +0200645config PCSPKR_PLATFORM
646 bool "Enable PC-Speaker support" if EMBEDDED
647 depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES
648 default y
649 help
650 This option allows to disable the internal PC-Speaker
651 support, saving some memory.
652
Ingo Molnar32a93232008-02-06 22:39:44 +0100653config COMPAT_BRK
654 bool "Disable heap randomization"
655 default y
656 help
657 Randomizing heap placement makes heap exploits harder, but it
658 also breaks ancient binaries (including anything libc5 based).
659 This option changes the bootup default to heap randomization
660 disabled, and can be overriden runtime by setting
661 /proc/sys/kernel/randomize_va_space to 2.
662
Ingo Molnar166124f2008-02-09 23:24:09 +0100663 On non-ancient distros (post-2000 ones) N is usually a safe choice.
Ingo Molnar32a93232008-02-06 22:39:44 +0100664
Linus Torvalds1da177e2005-04-16 15:20:36 -0700665config BASE_FULL
666 default y
667 bool "Enable full-sized data structures for core" if EMBEDDED
668 help
669 Disabling this option reduces the size of miscellaneous core
670 kernel data structures. This saves memory on small machines,
671 but may reduce performance.
672
673config FUTEX
674 bool "Enable futex support" if EMBEDDED
675 default y
Ingo Molnar23f78d4a2006-06-27 02:54:53 -0700676 select RT_MUTEXES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700677 help
678 Disabling this option will cause the kernel to be built without
679 support for "fast userspace mutexes". The resulting kernel may not
680 run glibc-based applications correctly.
681
Davide Libenzi5dc8bf82007-05-10 22:23:11 -0700682config ANON_INODES
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700683 bool
Davide Libenzi5dc8bf82007-05-10 22:23:11 -0700684
Linus Torvalds1da177e2005-04-16 15:20:36 -0700685config EPOLL
686 bool "Enable eventpoll support" if EMBEDDED
687 default y
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700688 select ANON_INODES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700689 help
690 Disabling this option will cause the kernel to be built without
691 support for epoll family of system calls.
692
Davide Libenzifba2afa2007-05-10 22:23:13 -0700693config SIGNALFD
694 bool "Enable signalfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700695 select ANON_INODES
Davide Libenzifba2afa2007-05-10 22:23:13 -0700696 default y
697 help
698 Enable the signalfd() system call that allows to receive signals
699 on a file descriptor.
700
701 If unsure, say Y.
702
Davide Libenzib215e282007-05-10 22:23:16 -0700703config TIMERFD
704 bool "Enable timerfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700705 select ANON_INODES
Davide Libenzib215e282007-05-10 22:23:16 -0700706 default y
707 help
708 Enable the timerfd() system call that allows to receive timer
709 events on a file descriptor.
710
711 If unsure, say Y.
712
Davide Libenzie1ad7462007-05-10 22:23:19 -0700713config EVENTFD
714 bool "Enable eventfd() system call" if EMBEDDED
Adrian Bunk448e3ce2007-07-31 00:39:10 -0700715 select ANON_INODES
Davide Libenzie1ad7462007-05-10 22:23:19 -0700716 default y
717 help
718 Enable the eventfd() system call that allows to receive both
719 kernel notification (ie. KAIO) or userspace notifications.
720
721 If unsure, say Y.
722
Linus Torvalds1da177e2005-04-16 15:20:36 -0700723config SHMEM
724 bool "Use full shmem filesystem" if EMBEDDED
725 default y
726 depends on MMU
727 help
728 The shmem is an internal filesystem used to manage shared memory.
729 It is backed by swap and manages resource limits. It is also exported
730 to userspace as tmpfs if TMPFS is enabled. Disabling this
731 option replaces shmem and tmpfs with the much simpler ramfs code,
732 which may be appropriate on small systems without swap.
733
Thomas Petazzoniebf3f092008-10-15 22:05:12 -0700734config AIO
735 bool "Enable AIO support" if EMBEDDED
736 default y
737 help
738 This option enables POSIX asynchronous I/O which may by used
739 by some high performance threaded applications. Disabling
740 this option saves about 7k.
741
Christoph Lameterf8891e52006-06-30 01:55:45 -0700742config VM_EVENT_COUNTERS
743 default y
744 bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
745 help
Paul Jackson2aea4fb2006-12-22 01:06:10 -0800746 VM event counters are needed for event counts to be shown.
747 This option allows the disabling of the VM event counters
748 on EMBEDDED systems. /proc/vmstat will only show page counts
749 if VM event counters are disabled.
Christoph Lameterf8891e52006-06-30 01:55:45 -0700750
Thomas Petazzoni3d137312008-08-19 10:28:24 +0200751config PCI_QUIRKS
752 default y
Geert Uytterhoeven61cfc7e2008-10-22 08:53:25 +0200753 bool "Enable PCI quirk workarounds" if EMBEDDED
754 depends on PCI
Thomas Petazzoni3d137312008-08-19 10:28:24 +0200755 help
756 This enables workarounds for various PCI chipset
757 bugs/quirks. Disable this only if your target machine is
758 unaffected by PCI quirks.
759
Christoph Lameter41ecc552007-05-09 02:32:44 -0700760config SLUB_DEBUG
761 default y
762 bool "Enable SLUB debugging support" if EMBEDDED
Christoph Lameterf6acb632008-04-29 16:16:06 -0700763 depends on SLUB && SYSFS
Christoph Lameter41ecc552007-05-09 02:32:44 -0700764 help
765 SLUB has extensive debug support features. Disabling these can
766 result in significant savings in code size. This also disables
767 SLUB sysfs support. /sys/slab will not exist and there will be
768 no support for cache validation etc.
769
Christoph Lameter81819f02007-05-06 14:49:36 -0700770choice
771 prompt "Choose SLAB allocator"
Christoph Lametera0acd822007-07-17 04:03:32 -0700772 default SLUB
Christoph Lameter81819f02007-05-06 14:49:36 -0700773 help
774 This option allows to select a slab allocator.
775
776config SLAB
777 bool "SLAB"
778 help
779 The regular slab allocator that is established and known to work
Christoph Lameter34013882007-05-09 02:32:47 -0700780 well in all environments. It organizes cache hot objects in
Simon Arlott02f56212008-11-05 22:18:19 +0000781 per cpu and per node queues.
Christoph Lameter81819f02007-05-06 14:49:36 -0700782
783config SLUB
Christoph Lameter81819f02007-05-06 14:49:36 -0700784 bool "SLUB (Unqueued Allocator)"
785 help
786 SLUB is a slab allocator that minimizes cache line usage
787 instead of managing queues of cached objects (SLAB approach).
788 Per cpu caching is realized using slabs of objects instead
789 of queues of objects. SLUB can use memory efficiently
Simon Arlott02f56212008-11-05 22:18:19 +0000790 and has enhanced diagnostics. SLUB is the default choice for
791 a slab allocator.
Christoph Lameter81819f02007-05-06 14:49:36 -0700792
793config SLOB
Paul Mundt84a01c22007-07-15 23:38:24 -0700794 depends on EMBEDDED
Christoph Lameter81819f02007-05-06 14:49:36 -0700795 bool "SLOB (Simple Allocator)"
796 help
Matt Mackall37291452008-02-04 22:29:38 -0800797 SLOB replaces the stock allocator with a drastically simpler
798 allocator. SLOB is generally more space efficient but
799 does not perform as well on large systems.
Christoph Lameter81819f02007-05-06 14:49:36 -0700800
801endchoice
802
Mathieu Desnoyers125e5642008-02-02 15:10:36 -0500803config PROFILING
804 bool "Profiling support (EXPERIMENTAL)"
805 help
806 Say Y here to enable the extended profiling support mechanisms used
807 by profilers such as OProfile.
808
Ingo Molnar5f87f112008-07-23 14:15:22 +0200809#
810# Place an empty function call at each tracepoint site. Can be
811# dynamically changed for a probe function.
812#
Mathieu Desnoyers97e1c182008-07-18 12:16:16 -0400813config TRACEPOINTS
Ingo Molnar5f87f112008-07-23 14:15:22 +0200814 bool
Mathieu Desnoyers97e1c182008-07-18 12:16:16 -0400815
Mathieu Desnoyers125e5642008-02-02 15:10:36 -0500816config MARKERS
817 bool "Activate markers"
Mathieu Desnoyersc1df1bd2008-11-14 17:47:39 -0500818 depends on TRACEPOINTS
Mathieu Desnoyers125e5642008-02-02 15:10:36 -0500819 help
820 Place an empty function call at each marker site. Can be
821 dynamically changed for a probe function.
822
Mathieu Desnoyersfb32e032008-02-02 15:10:33 -0500823source "arch/Kconfig"
824
Linus Torvalds1da177e2005-04-16 15:20:36 -0700825endmenu # General setup
826
Dmitry Baryshkovee7e5512008-06-29 14:18:46 +0400827config HAVE_GENERIC_DMA_COHERENT
828 bool
829 default n
830
Linus Torvalds158a9622008-01-02 13:04:48 -0800831config SLABINFO
832 bool
833 depends on PROC_FS
Christoph Lameter0f389ec2008-04-14 18:53:02 +0300834 depends on SLAB || SLUB_DEBUG
Linus Torvalds158a9622008-01-02 13:04:48 -0800835 default y
836
Chuck Ebbertae81f9e2006-09-16 12:15:53 -0700837config RT_MUTEXES
838 boolean
839 select PLIST
840
Linus Torvalds1da177e2005-04-16 15:20:36 -0700841config TINY_SHMEM
842 default !SHMEM
843 bool
844
845config BASE_SMALL
846 int
847 default 0 if BASE_FULL
848 default 1 if !BASE_FULL
849
Jan Engelhardt66da5732007-07-15 23:39:29 -0700850menuconfig MODULES
Linus Torvalds1da177e2005-04-16 15:20:36 -0700851 bool "Enable loadable module support"
852 help
853 Kernel modules are small pieces of compiled code which can
854 be inserted in the running kernel, rather than being
855 permanently built into the kernel. You use the "modprobe"
856 tool to add (and sometimes remove) them. If you say Y here,
857 many parts of the kernel can be built as modules (by
858 answering M instead of Y where indicated): this is most
859 useful for infrequently used options which are not required
860 for booting. For more information, see the man pages for
861 modprobe, lsmod, modinfo, insmod and rmmod.
862
863 If you say Y here, you will need to run "make
864 modules_install" to put the modules under /lib/modules/
865 where modprobe can find them (you may need to be root to do
866 this).
867
868 If unsure, say Y.
869
Robert P. J. Day0b0de142008-08-04 13:31:32 -0400870if MODULES
871
Linus Torvalds826e4502008-05-04 17:04:16 -0700872config MODULE_FORCE_LOAD
873 bool "Forced module loading"
Linus Torvalds826e4502008-05-04 17:04:16 -0700874 default n
875 help
Rusty Russell91e37a72008-05-09 16:25:28 +1000876 Allow loading of modules without version information (ie. modprobe
877 --force). Forced module loading sets the 'F' (forced) taint flag and
878 is usually a really bad idea.
Linus Torvalds826e4502008-05-04 17:04:16 -0700879
Linus Torvalds1da177e2005-04-16 15:20:36 -0700880config MODULE_UNLOAD
881 bool "Module unloading"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700882 help
883 Without this option you will not be able to unload any
884 modules (note that some modules may not be unloadable
Denys Vlasenkof7f5b672008-07-22 19:24:26 -0500885 anyway), which makes your kernel smaller, faster
886 and simpler. If unsure, say Y.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700887
888config MODULE_FORCE_UNLOAD
889 bool "Forced module unloading"
890 depends on MODULE_UNLOAD && EXPERIMENTAL
891 help
892 This option allows you to force a module to unload, even if the
893 kernel believes it is unsafe: the kernel will remove the module
894 without waiting for anyone to stop using it (using the -f option to
895 rmmod). This is mainly for kernel developers and desperate users.
896 If unsure, say N.
897
Linus Torvalds1da177e2005-04-16 15:20:36 -0700898config MODVERSIONS
Sam Ravnborg0d541642005-12-26 23:04:02 +0100899 bool "Module versioning support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700900 help
901 Usually, you have to use modules compiled with your kernel.
902 Saying Y here makes it sometimes possible to use modules
903 compiled for different kernels, by adding enough information
904 to the modules to (hopefully) spot any changes which would
905 make them incompatible with the kernel you are running. If
906 unsure, say N.
907
908config MODULE_SRCVERSION_ALL
909 bool "Source checksum for all modules"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700910 help
911 Modules which contain a MODULE_VERSION get an extra "srcversion"
912 field inserted into their modinfo section, which contains a
913 sum of the source files which made it. This helps maintainers
914 see exactly which source was used to build a module (since
915 others sometimes change the module source without updating
916 the version). With this option, such a "srcversion" field
917 will be created for all modules. If unsure, say N.
918
Robert P. J. Day0b0de142008-08-04 13:31:32 -0400919endif # MODULES
920
Rusty Russell98a79d62008-12-13 21:19:41 +1030921config INIT_ALL_POSSIBLE
922 bool
923 help
924 Back when each arch used to define their own cpu_online_map and
925 cpu_possible_map, some of them chose to initialize cpu_possible_map
926 with all 1s, and others with all 0s. When they were centralised,
927 it was better to provide this option than to break all the archs
928 and have several arch maintainers persuing me down dark alleys.
929
Linus Torvalds1da177e2005-04-16 15:20:36 -0700930config STOP_MACHINE
931 bool
932 default y
933 depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
934 help
935 Need stop_machine() primitive.
Jens Axboe3a65dfe2005-11-04 08:43:35 +0100936
Jens Axboe3a65dfe2005-11-04 08:43:35 +0100937source "block/Kconfig"
Avi Kivitye98c3202007-10-16 23:27:31 -0700938
939config PREEMPT_NOTIFIERS
940 bool
Paul E. McKenneye260be62008-01-25 21:08:24 +0100941
Ingo Molnar12d79ba2008-12-25 09:31:28 +0100942choice
943 prompt "RCU Implementation"
944 default CLASSIC_RCU
945
Paul E. McKenneye260be62008-01-25 21:08:24 +0100946config CLASSIC_RCU
Ingo Molnar12d79ba2008-12-25 09:31:28 +0100947 bool "Classic RCU"
Paul E. McKenneye260be62008-01-25 21:08:24 +0100948 help
949 This option selects the classic RCU implementation that is
950 designed for best read-side performance on non-realtime
Ingo Molnar12d79ba2008-12-25 09:31:28 +0100951 systems.
952
953 Select this option if you are unsure.
954
955config TREE_RCU
956 bool "Tree-based hierarchical RCU"
957 help
958 This option selects the RCU implementation that is
959 designed for very large SMP system with hundreds or
960 thousands of CPUs.
961
962config PREEMPT_RCU
963 bool "Preemptible RCU"
964 depends on PREEMPT
965 help
966 This option reduces the latency of the kernel by making certain
967 RCU sections preemptible. Normally RCU code is non-preemptible, if
968 this option is selected then read-only RCU sections become
969 preemptible. This helps latency, but may expose bugs due to
970 now-naive assumptions about each RCU read-side critical section
971 remaining on a given CPU through its execution.
972
973endchoice
974
975config RCU_TRACE
976 bool "Enable tracing for RCU"
977 depends on TREE_RCU || PREEMPT_RCU
978 help
979 This option provides tracing in RCU which presents stats
980 in debugfs for debugging RCU implementation.
981
982 Say Y here if you want to enable RCU tracing
983 Say N if you are unsure.
984
985config RCU_FANOUT
986 int "Tree-based hierarchical RCU fanout value"
987 range 2 64 if 64BIT
988 range 2 32 if !64BIT
989 depends on TREE_RCU
990 default 64 if 64BIT
991 default 32 if !64BIT
992 help
993 This option controls the fanout of hierarchical implementations
994 of RCU, allowing RCU to work efficiently on machines with
995 large numbers of CPUs. This value must be at least the cube
996 root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
997 systems and up to 262,144 for 64-bit systems.
998
999 Select a specific number if testing RCU itself.
1000 Take the default if unsure.
1001
1002config RCU_FANOUT_EXACT
1003 bool "Disable tree-based hierarchical RCU auto-balancing"
1004 depends on TREE_RCU
1005 default n
1006 help
1007 This option forces use of the exact RCU_FANOUT value specified,
1008 regardless of imbalances in the hierarchy. This is useful for
1009 testing RCU itself, and might one day be useful on systems with
1010 strong NUMA behavior.
1011
1012 Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
1013
1014 Say N if unsure.
1015
Paul E. McKenney64db4cf2008-12-18 21:55:32 +01001016config TREE_RCU_TRACE
1017 def_bool RCU_TRACE && TREE_RCU
1018 select DEBUG_FS
Paul E. McKenneye260be62008-01-25 21:08:24 +01001019 help
Paul E. McKenney64db4cf2008-12-18 21:55:32 +01001020 This option provides tracing for the TREE_RCU implementation,
1021 permitting Makefile to trivially select kernel/rcutree_trace.c.
1022
1023config PREEMPT_RCU_TRACE
1024 def_bool RCU_TRACE && PREEMPT_RCU
1025 select DEBUG_FS
1026 help
1027 This option provides tracing for the PREEMPT_RCU implementation,
1028 permitting Makefile to trivially select kernel/rcupreempt_trace.c.