blob: b8ac4597fad70c9e0f87023385f1ed53c0ea7ee7 [file] [log] [blame]
Ben Dooksbd117bd2009-03-10 18:19:35 +00001/* linux/arch/arm/plat-s3c64xx/pm.c
2 *
3 * Copyright 2008 Openmoko, Inc.
4 * Copyright 2008 Simtec Electronics
5 * Ben Dooks <ben@simtec.co.uk>
6 * http://armlinux.simtec.co.uk/
7 *
8 * S3C64XX CPU PM support.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13*/
14
15#include <linux/init.h>
16#include <linux/suspend.h>
17#include <linux/serial_core.h>
18#include <linux/io.h>
19
20#include <mach/map.h>
21
22#include <plat/pm.h>
Ben Dooks3501c9a2010-01-26 10:45:40 +090023#include <mach/regs-sys.h>
24#include <mach/regs-gpio.h>
25#include <mach/regs-clock.h>
26#include <mach/regs-syscon-power.h>
27#include <mach/regs-gpio-memport.h>
Ben Dooksbd117bd2009-03-10 18:19:35 +000028
29#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
Ben Dooks3501c9a2010-01-26 10:45:40 +090030#include <mach/gpio-bank-n.h>
Ben Dooksbd117bd2009-03-10 18:19:35 +000031
32void s3c_pm_debug_smdkled(u32 set, u32 clear)
33{
34 unsigned long flags;
35 u32 reg;
36
37 local_irq_save(flags);
38 reg = __raw_readl(S3C64XX_GPNCON);
39 reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
40 S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
41 reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
42 S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
43 __raw_writel(reg, S3C64XX_GPNCON);
44
45 reg = __raw_readl(S3C64XX_GPNDAT);
46 reg &= ~(clear << 12);
47 reg |= set << 12;
48 __raw_writel(reg, S3C64XX_GPNDAT);
49
50 local_irq_restore(flags);
51}
52#endif
53
54static struct sleep_save core_save[] = {
55 SAVE_ITEM(S3C_APLL_LOCK),
56 SAVE_ITEM(S3C_MPLL_LOCK),
57 SAVE_ITEM(S3C_EPLL_LOCK),
58 SAVE_ITEM(S3C_CLK_SRC),
59 SAVE_ITEM(S3C_CLK_DIV0),
60 SAVE_ITEM(S3C_CLK_DIV1),
61 SAVE_ITEM(S3C_CLK_DIV2),
62 SAVE_ITEM(S3C_CLK_OUT),
63 SAVE_ITEM(S3C_HCLK_GATE),
64 SAVE_ITEM(S3C_PCLK_GATE),
65 SAVE_ITEM(S3C_SCLK_GATE),
66 SAVE_ITEM(S3C_MEM0_GATE),
67
68 SAVE_ITEM(S3C_EPLL_CON1),
69 SAVE_ITEM(S3C_EPLL_CON0),
70
71 SAVE_ITEM(S3C64XX_MEM0DRVCON),
72 SAVE_ITEM(S3C64XX_MEM1DRVCON),
73
74#ifndef CONFIG_CPU_FREQ
75 SAVE_ITEM(S3C_APLL_CON),
76 SAVE_ITEM(S3C_MPLL_CON),
77#endif
78};
79
80static struct sleep_save misc_save[] = {
81 SAVE_ITEM(S3C64XX_AHB_CON0),
82 SAVE_ITEM(S3C64XX_AHB_CON1),
83 SAVE_ITEM(S3C64XX_AHB_CON2),
84
85 SAVE_ITEM(S3C64XX_SPCON),
86
87 SAVE_ITEM(S3C64XX_MEM0CONSTOP),
88 SAVE_ITEM(S3C64XX_MEM1CONSTOP),
89 SAVE_ITEM(S3C64XX_MEM0CONSLP0),
90 SAVE_ITEM(S3C64XX_MEM0CONSLP1),
91 SAVE_ITEM(S3C64XX_MEM1CONSLP),
92};
93
94void s3c_pm_configure_extint(void)
95{
96 __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
97}
98
Ben Dooksbd117bd2009-03-10 18:19:35 +000099void s3c_pm_restore_core(void)
100{
101 __raw_writel(0, S3C64XX_EINT_MASK);
102
103 s3c_pm_debug_smdkled(1 << 2, 0);
104
105 s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
106 s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
107}
108
109void s3c_pm_save_core(void)
110{
111 s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
112 s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
113}
114
115/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
116 * put the per-cpu code in here until any new cpu comes along and changes
117 * this.
118 */
119
Ben Dooksbd117bd2009-03-10 18:19:35 +0000120static void s3c64xx_cpu_suspend(void)
121{
122 unsigned long tmp;
123
124 /* set our standby method to sleep */
125
126 tmp = __raw_readl(S3C64XX_PWR_CFG);
127 tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
128 tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
129 __raw_writel(tmp, S3C64XX_PWR_CFG);
130
131 /* clear any old wakeup */
132
133 __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
134 S3C64XX_WAKEUP_STAT);
135
136 /* set the LED state to 0110 over sleep */
137 s3c_pm_debug_smdkled(3 << 1, 0xf);
138
139 /* issue the standby signal into the pm unit. Note, we
140 * issue a write-buffer drain just in case */
141
142 tmp = 0;
143
144 asm("b 1f\n\t"
145 ".align 5\n\t"
146 "1:\n\t"
147 "mcr p15, 0, %0, c7, c10, 5\n\t"
148 "mcr p15, 0, %0, c7, c10, 4\n\t"
149 "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
150
151 /* we should never get past here */
152
153 panic("sleep resumed to originator?");
154}
155
156static void s3c64xx_pm_prepare(void)
157{
158 /* store address of resume. */
159 __raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
160
161 /* ensure previous wakeup state is cleared before sleeping */
162 __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
163}
164
165static int s3c64xx_pm_init(void)
166{
167 pm_cpu_prep = s3c64xx_pm_prepare;
168 pm_cpu_sleep = s3c64xx_cpu_suspend;
169 pm_uart_udivslot = 1;
170 return 0;
171}
172
173arch_initcall(s3c64xx_pm_init);