Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | # |
| 2 | # Serial device configuration |
| 3 | # |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 4 | |
| 5 | menu "Serial drivers" |
Martin Schwidefsky | e25df12 | 2007-05-10 15:45:57 +0200 | [diff] [blame] | 6 | depends on HAS_IOMEM |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 7 | |
| 8 | # |
| 9 | # The new 8250/16550 serial drivers |
| 10 | config SERIAL_8250 |
| 11 | tristate "8250/16550 and compatible serial support" |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 12 | select SERIAL_CORE |
| 13 | ---help--- |
| 14 | This selects whether you want to include the driver for the standard |
| 15 | serial ports. The standard answer is Y. People who might say N |
| 16 | here are those that are setting up dedicated Ethernet WWW/FTP |
| 17 | servers, or users that have one of the various bus mice instead of a |
| 18 | serial mouse and don't intend to use their machine's standard serial |
| 19 | port for anything. (Note that the Cyclades and Stallion multi |
| 20 | serial port drivers do not need this driver built in for them to |
| 21 | work.) |
| 22 | |
| 23 | To compile this driver as a module, choose M here: the |
Timothy Charles McGrath | df7559d | 2006-01-23 09:50:09 +0000 | [diff] [blame] | 24 | module will be called 8250. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 25 | [WARNING: Do not compile this driver as a module if you are using |
| 26 | non-standard serial ports, since the configuration information will |
| 27 | be lost when the driver is unloaded. This limitation may be lifted |
| 28 | in the future.] |
| 29 | |
| 30 | BTW1: If you have a mouseman serial mouse which is not recognized by |
| 31 | the X window system, try running gpm first. |
| 32 | |
| 33 | BTW2: If you intend to use a software modem (also called Winmodem) |
| 34 | under Linux, forget it. These modems are crippled and require |
| 35 | proprietary drivers which are only available under Windows. |
| 36 | |
| 37 | Most people will say Y or M here, so that they can use serial mice, |
| 38 | modems and similar devices connecting to the standard serial ports. |
| 39 | |
| 40 | config SERIAL_8250_CONSOLE |
| 41 | bool "Console on 8250/16550 and compatible serial port" |
| 42 | depends on SERIAL_8250=y |
| 43 | select SERIAL_CORE_CONSOLE |
| 44 | ---help--- |
| 45 | If you say Y here, it will be possible to use a serial port as the |
| 46 | system console (the system console is the device which receives all |
| 47 | kernel messages and warnings and which allows logins in single user |
| 48 | mode). This could be useful if some terminal or printer is connected |
| 49 | to that serial port. |
| 50 | |
| 51 | Even if you say Y here, the currently visible virtual console |
| 52 | (/dev/tty0) will still be used as the system console by default, but |
| 53 | you can alter that using a kernel command line option such as |
| 54 | "console=ttyS1". (Try "man bootparam" or see the documentation of |
| 55 | your boot loader (grub or lilo or loadlin) about how to pass options |
| 56 | to the kernel at boot time.) |
| 57 | |
| 58 | If you don't have a VGA card installed and you say Y here, the |
| 59 | kernel will automatically use the first serial line, /dev/ttyS0, as |
| 60 | system console. |
| 61 | |
Matt LaPlante | 01dd2fb | 2007-10-20 01:34:40 +0200 | [diff] [blame] | 62 | You can set that using a kernel command line option such as |
Yinghai Lu | 18a8bd9 | 2007-07-15 23:37:59 -0700 | [diff] [blame] | 63 | "console=uart8250,io,0x3f8,9600n8" |
| 64 | "console=uart8250,mmio,0xff5e0000,115200n8". |
Matt LaPlante | 01dd2fb | 2007-10-20 01:34:40 +0200 | [diff] [blame] | 65 | and it will switch to normal serial console when the corresponding |
| 66 | port is ready. |
Yinghai Lu | 18a8bd9 | 2007-07-15 23:37:59 -0700 | [diff] [blame] | 67 | "earlycon=uart8250,io,0x3f8,9600n8" |
| 68 | "earlycon=uart8250,mmio,0xff5e0000,115200n8". |
| 69 | it will not only setup early console. |
| 70 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 71 | If unsure, say N. |
| 72 | |
Yinghai Lu | 18a8bd9 | 2007-07-15 23:37:59 -0700 | [diff] [blame] | 73 | config FIX_EARLYCON_MEM |
| 74 | bool |
| 75 | depends on X86 |
| 76 | default y |
| 77 | |
Russell King | 0cff260 | 2006-03-29 22:03:38 +0100 | [diff] [blame] | 78 | config SERIAL_8250_GSC |
| 79 | tristate |
| 80 | depends on SERIAL_8250 && GSC |
| 81 | default SERIAL_8250 |
| 82 | |
| 83 | config SERIAL_8250_PCI |
| 84 | tristate "8250/16550 PCI device support" if EMBEDDED |
| 85 | depends on SERIAL_8250 && PCI |
| 86 | default SERIAL_8250 |
| 87 | help |
Andrew Morton | 57d4810 | 2007-07-31 00:38:02 -0700 | [diff] [blame] | 88 | This builds standard PCI serial support. You may be able to |
| 89 | disable this feature if you only need legacy serial support. |
| 90 | Saves about 9K. |
Russell King | 0cff260 | 2006-03-29 22:03:38 +0100 | [diff] [blame] | 91 | |
| 92 | config SERIAL_8250_PNP |
| 93 | tristate "8250/16550 PNP device support" if EMBEDDED |
| 94 | depends on SERIAL_8250 && PNP |
| 95 | default SERIAL_8250 |
| 96 | help |
Andrew Morton | 57d4810 | 2007-07-31 00:38:02 -0700 | [diff] [blame] | 97 | This builds standard PNP serial support. You may be able to |
| 98 | disable this feature if you only need legacy serial support. |
Russell King | 0cff260 | 2006-03-29 22:03:38 +0100 | [diff] [blame] | 99 | |
| 100 | config SERIAL_8250_HP300 |
| 101 | tristate |
| 102 | depends on SERIAL_8250 && HP300 |
| 103 | default SERIAL_8250 |
| 104 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 105 | config SERIAL_8250_CS |
| 106 | tristate "8250/16550 PCMCIA device support" |
| 107 | depends on PCMCIA && SERIAL_8250 |
| 108 | ---help--- |
| 109 | Say Y here to enable support for 16-bit PCMCIA serial devices, |
| 110 | including serial port cards, modems, and the modem functions of |
| 111 | multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are |
| 112 | credit-card size devices often used with laptops.) |
| 113 | |
| 114 | To compile this driver as a module, choose M here: the |
| 115 | module will be called serial_cs. |
| 116 | |
| 117 | If unsure, say N. |
| 118 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 119 | config SERIAL_8250_NR_UARTS |
Russell King | 026d02a | 2005-06-29 18:45:19 +0100 | [diff] [blame] | 120 | int "Maximum number of 8250/16550 serial ports" |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 121 | depends on SERIAL_8250 |
| 122 | default "4" |
Russell King | ec9f47c | 2005-06-27 11:12:54 +0100 | [diff] [blame] | 123 | help |
| 124 | Set this to the number of serial ports you want the driver |
| 125 | to support. This includes any ports discovered via ACPI or |
| 126 | PCI enumeration and any ports that may be added at run-time |
| 127 | via hot-plug, or any ISA multi-port serial cards. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 128 | |
Dave Jones | a61c2d7 | 2006-01-07 23:18:19 +0000 | [diff] [blame] | 129 | config SERIAL_8250_RUNTIME_UARTS |
| 130 | int "Number of 8250/16550 serial ports to register at runtime" |
| 131 | depends on SERIAL_8250 |
Russell King | 9a8ffcc | 2006-02-03 22:05:42 +0000 | [diff] [blame] | 132 | range 0 SERIAL_8250_NR_UARTS |
Dave Jones | a61c2d7 | 2006-01-07 23:18:19 +0000 | [diff] [blame] | 133 | default "4" |
| 134 | help |
| 135 | Set this to the maximum number of serial ports you want |
Matt LaPlante | 0950960 | 2006-10-03 22:31:37 +0200 | [diff] [blame] | 136 | the kernel to register at boot time. This can be overridden |
Dave Jones | a61c2d7 | 2006-01-07 23:18:19 +0000 | [diff] [blame] | 137 | with the module parameter "nr_uarts", or boot-time parameter |
| 138 | 8250.nr_uarts |
| 139 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 140 | config SERIAL_8250_EXTENDED |
| 141 | bool "Extended 8250/16550 serial driver options" |
| 142 | depends on SERIAL_8250 |
| 143 | help |
| 144 | If you wish to use any non-standard features of the standard "dumb" |
| 145 | driver, say Y here. This includes HUB6 support, shared serial |
| 146 | interrupts, special multiport support, support for more than the |
| 147 | four COM 1/2/3/4 boards, etc. |
| 148 | |
| 149 | Note that the answer to this question won't directly affect the |
| 150 | kernel: saying N will just cause the configurator to skip all |
| 151 | the questions about serial driver options. If unsure, say N. |
| 152 | |
| 153 | config SERIAL_8250_MANY_PORTS |
| 154 | bool "Support more than 4 legacy serial ports" |
| 155 | depends on SERIAL_8250_EXTENDED && !IA64 |
| 156 | help |
| 157 | Say Y here if you have dumb serial boards other than the four |
| 158 | standard COM 1/2/3/4 ports. This may happen if you have an AST |
| 159 | FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available |
| 160 | from <http://www.tldp.org/docs.html#howto>), or other custom |
| 161 | serial port hardware which acts similar to standard serial port |
| 162 | hardware. If you only use the standard COM 1/2/3/4 ports, you can |
| 163 | say N here to save some memory. You can also say Y if you have an |
| 164 | "intelligent" multiport card such as Cyclades, Digiboards, etc. |
| 165 | |
Russell King | ec9f47c | 2005-06-27 11:12:54 +0100 | [diff] [blame] | 166 | # |
| 167 | # Multi-port serial cards |
| 168 | # |
| 169 | |
| 170 | config SERIAL_8250_FOURPORT |
| 171 | tristate "Support Fourport cards" |
| 172 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS |
| 173 | help |
| 174 | Say Y here if you have an AST FourPort serial board. |
| 175 | |
| 176 | To compile this driver as a module, choose M here: the module |
| 177 | will be called 8250_fourport. |
| 178 | |
| 179 | config SERIAL_8250_ACCENT |
| 180 | tristate "Support Accent cards" |
| 181 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS |
| 182 | help |
| 183 | Say Y here if you have an Accent Async serial board. |
| 184 | |
| 185 | To compile this driver as a module, choose M here: the module |
| 186 | will be called 8250_accent. |
| 187 | |
Russell King | ec9f47c | 2005-06-27 11:12:54 +0100 | [diff] [blame] | 188 | config SERIAL_8250_BOCA |
| 189 | tristate "Support Boca cards" |
| 190 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS |
| 191 | help |
| 192 | Say Y here if you have a Boca serial board. Please read the Boca |
Matt LaPlante | 0950960 | 2006-10-03 22:31:37 +0200 | [diff] [blame] | 193 | mini-HOWTO, available from <http://www.tldp.org/docs.html#howto> |
Russell King | ec9f47c | 2005-06-27 11:12:54 +0100 | [diff] [blame] | 194 | |
| 195 | To compile this driver as a module, choose M here: the module |
| 196 | will be called 8250_boca. |
| 197 | |
Paul B Schroeder | e0980da | 2006-12-06 20:37:03 -0800 | [diff] [blame] | 198 | config SERIAL_8250_EXAR_ST16C554 |
| 199 | tristate "Support Exar ST16C554/554D Quad UART" |
| 200 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS |
| 201 | help |
| 202 | The Uplogix Envoy TU301 uses this Exar Quad UART. If you are |
| 203 | tinkering with your Envoy TU301, or have a machine with this UART, |
| 204 | say Y here. |
| 205 | |
| 206 | To compile this driver as a module, choose M here: the module |
| 207 | will be called 8250_exar_st16c554. |
| 208 | |
Russell King | ec9f47c | 2005-06-27 11:12:54 +0100 | [diff] [blame] | 209 | config SERIAL_8250_HUB6 |
| 210 | tristate "Support Hub6 cards" |
| 211 | depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS |
| 212 | help |
| 213 | Say Y here if you have a HUB6 serial board. |
| 214 | |
| 215 | To compile this driver as a module, choose M here: the module |
| 216 | will be called 8250_hub6. |
| 217 | |
Don Mullis | bf4735a | 2006-12-10 02:18:37 -0800 | [diff] [blame] | 218 | config SERIAL_8250_SHARE_IRQ |
| 219 | bool "Support for sharing serial interrupts" |
| 220 | depends on SERIAL_8250_EXTENDED |
| 221 | help |
| 222 | Some serial boards have hardware support which allows multiple dumb |
| 223 | serial ports on the same board to share a single IRQ. To enable |
| 224 | support for this in the serial driver, say Y here. |
| 225 | |
| 226 | config SERIAL_8250_DETECT_IRQ |
| 227 | bool "Autodetect IRQ on standard ports (unsafe)" |
| 228 | depends on SERIAL_8250_EXTENDED |
| 229 | help |
| 230 | Say Y here if you want the kernel to try to guess which IRQ |
| 231 | to use for your serial port. |
| 232 | |
| 233 | This is considered unsafe; it is far better to configure the IRQ in |
| 234 | a boot script using the setserial command. |
| 235 | |
| 236 | If unsure, say N. |
| 237 | |
| 238 | config SERIAL_8250_RSA |
| 239 | bool "Support RSA serial ports" |
| 240 | depends on SERIAL_8250_EXTENDED |
| 241 | help |
| 242 | ::: To be written ::: |
| 243 | |
Russell King | ec9f47c | 2005-06-27 11:12:54 +0100 | [diff] [blame] | 244 | config SERIAL_8250_MCA |
| 245 | tristate "Support 8250-type ports on MCA buses" |
| 246 | depends on SERIAL_8250 != n && MCA |
| 247 | help |
| 248 | Say Y here if you have a MCA serial ports. |
| 249 | |
| 250 | To compile this driver as a module, choose M here: the module |
| 251 | will be called 8250_mca. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 252 | |
| 253 | config SERIAL_8250_ACORN |
| 254 | tristate "Acorn expansion card serial port support" |
Russell King | ec9f47c | 2005-06-27 11:12:54 +0100 | [diff] [blame] | 255 | depends on ARCH_ACORN && SERIAL_8250 |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 256 | help |
| 257 | If you have an Atomwide Serial card or Serial Port card for an Acorn |
| 258 | system, say Y to this option. The driver can handle 1, 2, or 3 port |
| 259 | cards. If unsure, say N. |
| 260 | |
Thomas Koeller | bd71c18 | 2007-05-06 14:48:47 -0700 | [diff] [blame] | 261 | config SERIAL_8250_RM9K |
| 262 | bool "Support for MIPS RM9xxx integrated serial port" |
| 263 | depends on SERIAL_8250 != n && SERIAL_RM9000 |
| 264 | select SERIAL_8250_SHARE_IRQ |
| 265 | help |
| 266 | Selecting this option will add support for the integrated serial |
| 267 | port hardware found on MIPS RM9122 and similar processors. |
| 268 | If unsure, say N. |
| 269 | |
Russell King | ec9f47c | 2005-06-27 11:12:54 +0100 | [diff] [blame] | 270 | comment "Non-8250 serial port support" |
| 271 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 272 | config SERIAL_AMBA_PL010 |
| 273 | tristate "ARM AMBA PL010 serial port support" |
Al Viro | 84b6a23 | 2005-08-23 22:46:16 +0100 | [diff] [blame] | 274 | depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 275 | select SERIAL_CORE |
| 276 | help |
| 277 | This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have |
Lennert Buytenhek | 0058471 | 2007-02-05 16:10:22 -0800 | [diff] [blame] | 278 | an Integrator/AP or Integrator/PP2 platform, or if you have a |
| 279 | Cirrus Logic EP93xx CPU, say Y or M here. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 280 | |
| 281 | If unsure, say N. |
| 282 | |
| 283 | config SERIAL_AMBA_PL010_CONSOLE |
| 284 | bool "Support for console on AMBA serial port" |
| 285 | depends on SERIAL_AMBA_PL010=y |
| 286 | select SERIAL_CORE_CONSOLE |
| 287 | ---help--- |
| 288 | Say Y here if you wish to use an AMBA PrimeCell UART as the system |
| 289 | console (the system console is the device which receives all kernel |
| 290 | messages and warnings and which allows logins in single user mode). |
| 291 | |
| 292 | Even if you say Y here, the currently visible framebuffer console |
| 293 | (/dev/tty0) will still be used as the system console by default, but |
| 294 | you can alter that using a kernel command line option such as |
| 295 | "console=ttyAM0". (Try "man bootparam" or see the documentation of |
| 296 | your boot loader (lilo or loadlin) about how to pass options to the |
| 297 | kernel at boot time.) |
| 298 | |
| 299 | config SERIAL_AMBA_PL011 |
| 300 | tristate "ARM AMBA PL011 serial port support" |
| 301 | depends on ARM_AMBA |
| 302 | select SERIAL_CORE |
| 303 | help |
| 304 | This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have |
| 305 | an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M |
| 306 | here. |
| 307 | |
| 308 | If unsure, say N. |
| 309 | |
| 310 | config SERIAL_AMBA_PL011_CONSOLE |
| 311 | bool "Support for console on AMBA serial port" |
| 312 | depends on SERIAL_AMBA_PL011=y |
| 313 | select SERIAL_CORE_CONSOLE |
| 314 | ---help--- |
| 315 | Say Y here if you wish to use an AMBA PrimeCell UART as the system |
| 316 | console (the system console is the device which receives all kernel |
| 317 | messages and warnings and which allows logins in single user mode). |
| 318 | |
| 319 | Even if you say Y here, the currently visible framebuffer console |
| 320 | (/dev/tty0) will still be used as the system console by default, but |
| 321 | you can alter that using a kernel command line option such as |
Peter Korsgaard | b22b4cd | 2006-09-29 02:00:23 -0700 | [diff] [blame] | 322 | "console=ttyAMA0". (Try "man bootparam" or see the documentation of |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 323 | your boot loader (lilo or loadlin) about how to pass options to the |
| 324 | kernel at boot time.) |
| 325 | |
Maciej W. Rozycki | b45d527 | 2007-07-17 04:03:50 -0700 | [diff] [blame] | 326 | config SERIAL_SB1250_DUART |
| 327 | tristate "BCM1xxx on-chip DUART serial support" |
| 328 | depends on SIBYTE_SB1xxx_SOC=y |
| 329 | select SERIAL_CORE |
| 330 | default y |
| 331 | ---help--- |
| 332 | Support for the asynchronous serial interface (DUART) included in |
| 333 | the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that |
| 334 | the letter D in DUART stands for "dual", which is how the device |
| 335 | is implemented. Depending on the SOC configuration there may be |
| 336 | one or more DUARTs available of which all are handled. |
| 337 | |
| 338 | If unsure, say Y. To compile this driver as a module, choose M here: |
| 339 | the module will be called sb1250-duart. |
| 340 | |
| 341 | config SERIAL_SB1250_DUART_CONSOLE |
| 342 | bool "Support for console on a BCM1xxx DUART serial port" |
| 343 | depends on SERIAL_SB1250_DUART=y |
| 344 | select SERIAL_CORE_CONSOLE |
| 345 | default y |
| 346 | ---help--- |
| 347 | If you say Y here, it will be possible to use a serial port as the |
| 348 | system console (the system console is the device which receives all |
| 349 | kernel messages and warnings and which allows logins in single user |
| 350 | mode). |
| 351 | |
| 352 | If unsure, say Y. |
| 353 | |
Haavard Skinnemoen | 749c4e6 | 2006-10-04 16:02:02 +0200 | [diff] [blame] | 354 | config SERIAL_ATMEL |
| 355 | bool "AT91 / AT32 on-chip serial port support" |
Haavard Skinnemoen | acca9b8 | 2006-10-04 16:02:09 +0200 | [diff] [blame] | 356 | depends on (ARM && ARCH_AT91) || AVR32 |
Andrew Victor | 1e6c9c2 | 2006-01-10 16:59:27 +0000 | [diff] [blame] | 357 | select SERIAL_CORE |
| 358 | help |
Andrew Victor | afefc41 | 2006-06-19 19:53:19 +0100 | [diff] [blame] | 359 | This enables the driver for the on-chip UARTs of the Atmel |
Haavard Skinnemoen | acca9b8 | 2006-10-04 16:02:09 +0200 | [diff] [blame] | 360 | AT91 and AT32 processors. |
Andrew Victor | 1e6c9c2 | 2006-01-10 16:59:27 +0000 | [diff] [blame] | 361 | |
Haavard Skinnemoen | 749c4e6 | 2006-10-04 16:02:02 +0200 | [diff] [blame] | 362 | config SERIAL_ATMEL_CONSOLE |
| 363 | bool "Support for console on AT91 / AT32 serial port" |
| 364 | depends on SERIAL_ATMEL=y |
Andrew Victor | 1e6c9c2 | 2006-01-10 16:59:27 +0000 | [diff] [blame] | 365 | select SERIAL_CORE_CONSOLE |
| 366 | help |
Haavard Skinnemoen | acca9b8 | 2006-10-04 16:02:09 +0200 | [diff] [blame] | 367 | Say Y here if you wish to use an on-chip UART on a Atmel |
| 368 | AT91 or AT32 processor as the system console (the system |
| 369 | console is the device which receives all kernel messages and |
| 370 | warnings and which allows logins in single user mode). |
Andrew Victor | 1e6c9c2 | 2006-01-10 16:59:27 +0000 | [diff] [blame] | 371 | |
Chip Coldwell | a667061 | 2008-02-08 04:21:06 -0800 | [diff] [blame] | 372 | config SERIAL_ATMEL_PDC |
| 373 | bool "Support DMA transfers on AT91 / AT32 serial port" |
| 374 | depends on SERIAL_ATMEL |
| 375 | default y |
| 376 | help |
| 377 | Say Y here if you wish to use the PDC to do DMA transfers to |
| 378 | and from the Atmel AT91 / AT32 serial port. In order to |
| 379 | actually use DMA transfers, make sure that the use_dma_tx |
| 380 | and use_dma_rx members in the atmel_uart_data struct is set |
| 381 | appropriately for each port. |
| 382 | |
| 383 | Note that break and error handling currently doesn't work |
| 384 | properly when DMA is enabled. Make sure that ports where |
| 385 | this matters don't use DMA. |
| 386 | |
Haavard Skinnemoen | 749c4e6 | 2006-10-04 16:02:02 +0200 | [diff] [blame] | 387 | config SERIAL_ATMEL_TTYAT |
Haavard Skinnemoen | acca9b8 | 2006-10-04 16:02:09 +0200 | [diff] [blame] | 388 | bool "Install as device ttyATn instead of ttySn" |
Haavard Skinnemoen | 749c4e6 | 2006-10-04 16:02:02 +0200 | [diff] [blame] | 389 | depends on SERIAL_ATMEL=y |
Andrew Victor | 1e6c9c2 | 2006-01-10 16:59:27 +0000 | [diff] [blame] | 390 | help |
Haavard Skinnemoen | acca9b8 | 2006-10-04 16:02:09 +0200 | [diff] [blame] | 391 | Say Y here if you wish to have the internal AT91 / AT32 UARTs |
| 392 | appear as /dev/ttyATn (major 204, minor starting at 154) |
| 393 | instead of the normal /dev/ttySn (major 4, minor starting at |
| 394 | 64). This is necessary if you also want other UARTs, such as |
| 395 | external 8250/16C550 compatible UARTs. |
Andrew Victor | 1e6c9c2 | 2006-01-10 16:59:27 +0000 | [diff] [blame] | 396 | The ttySn nodes are legally reserved for the 8250 serial driver |
| 397 | but are often misused by other serial drivers. |
| 398 | |
| 399 | To use this, you should create suitable ttyATn device nodes in |
| 400 | /dev/, and pass "console=ttyATn" to the kernel. |
| 401 | |
| 402 | Say Y if you have an external 8250/16C550 UART. If unsure, say N. |
| 403 | |
Andrew Victor | 2c7ee6a | 2007-05-11 21:37:25 +0100 | [diff] [blame] | 404 | config SERIAL_KS8695 |
| 405 | bool "Micrel KS8695 (Centaur) serial port support" |
| 406 | depends on ARCH_KS8695 |
| 407 | select SERIAL_CORE |
| 408 | help |
| 409 | This selects the Micrel Centaur KS8695 UART. Say Y here. |
| 410 | |
| 411 | config SERIAL_KS8695_CONSOLE |
| 412 | bool "Support for console on KS8695 (Centaur) serial port" |
| 413 | depends on SERIAL_KS8695=y |
| 414 | select SERIAL_CORE_CONSOLE |
| 415 | help |
| 416 | Say Y here if you wish to use a KS8695 (Centaur) UART as the |
| 417 | system console (the system console is the device which |
| 418 | receives all kernel messages and warnings and which allows |
| 419 | logins in single user mode). |
| 420 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 421 | config SERIAL_CLPS711X |
| 422 | tristate "CLPS711X serial port support" |
| 423 | depends on ARM && ARCH_CLPS711X |
| 424 | select SERIAL_CORE |
| 425 | help |
| 426 | ::: To be written ::: |
| 427 | |
| 428 | config SERIAL_CLPS711X_CONSOLE |
| 429 | bool "Support for console on CLPS711X serial port" |
| 430 | depends on SERIAL_CLPS711X=y |
| 431 | select SERIAL_CORE_CONSOLE |
| 432 | help |
| 433 | Even if you say Y here, the currently visible virtual console |
| 434 | (/dev/tty0) will still be used as the system console by default, but |
| 435 | you can alter that using a kernel command line option such as |
| 436 | "console=ttyCL1". (Try "man bootparam" or see the documentation of |
| 437 | your boot loader (lilo or loadlin) about how to pass options to the |
| 438 | kernel at boot time.) |
| 439 | |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 440 | config SERIAL_SAMSUNG |
| 441 | tristate "Samsung SoC serial support" |
Ben Dooks | 1de203a | 2010-01-29 10:53:35 +0900 | [diff] [blame] | 442 | depends on ARM && PLAT_SAMSUNG |
Arnaud Patard (Rtp | 19c1d6a | 2008-07-08 01:03:46 +0200 | [diff] [blame] | 443 | select SERIAL_CORE |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 444 | help |
Ben Dooks | 73e55cb | 2006-06-24 21:21:32 +0100 | [diff] [blame] | 445 | Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 446 | providing /dev/ttySAC0, 1 and 2 (note, some machines may not |
| 447 | provide all of these ports, depending on how the serial port |
| 448 | pins are configured. |
| 449 | |
Ben Dooks | 3bd9377 | 2010-01-29 10:52:02 +0900 | [diff] [blame] | 450 | config SERIAL_SAMSUNG_UARTS_4 |
| 451 | bool |
| 452 | depends on ARM && PLAT_SAMSUNG |
| 453 | default y if CPU_S3C2443 |
| 454 | help |
| 455 | Internal node for the common case of 4 Samsung compatible UARTs |
| 456 | |
Ben Dooks | 03d5e77 | 2008-11-03 09:21:23 +0000 | [diff] [blame] | 457 | config SERIAL_SAMSUNG_UARTS |
| 458 | int |
Ben Dooks | 1de203a | 2010-01-29 10:53:35 +0900 | [diff] [blame] | 459 | depends on ARM && PLAT_SAMSUNG |
Ben Dooks | 03d5e77 | 2008-11-03 09:21:23 +0000 | [diff] [blame] | 460 | default 2 if ARCH_S3C2400 |
Kukjin Kim | 2555e66 | 2010-09-01 15:13:44 +0900 | [diff] [blame] | 461 | default 6 if ARCH_S5P6450 |
Ben Dooks | 3bd9377 | 2010-01-29 10:52:02 +0900 | [diff] [blame] | 462 | default 4 if SERIAL_SAMSUNG_UARTS_4 |
Ben Dooks | 03d5e77 | 2008-11-03 09:21:23 +0000 | [diff] [blame] | 463 | default 3 |
| 464 | help |
| 465 | Select the number of available UART ports for the Samsung S3C |
| 466 | serial driver |
| 467 | |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 468 | config SERIAL_SAMSUNG_DEBUG |
| 469 | bool "Samsung SoC serial debug" |
Ben Dooks | 5fed4a3 | 2008-10-16 16:46:08 +0100 | [diff] [blame] | 470 | depends on SERIAL_SAMSUNG && DEBUG_LL |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 471 | help |
| 472 | Add support for debugging the serial driver. Since this is |
| 473 | generally being used as a console, we use our own output |
| 474 | routines that go via the low-level debug printascii() |
| 475 | function. |
Ben Dooks | 73e55cb | 2006-06-24 21:21:32 +0100 | [diff] [blame] | 476 | |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 477 | config SERIAL_SAMSUNG_CONSOLE |
| 478 | bool "Support for console on Samsung SoC serial port" |
| 479 | depends on SERIAL_SAMSUNG=y |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 480 | select SERIAL_CORE_CONSOLE |
| 481 | help |
Ben Dooks | 73e55cb | 2006-06-24 21:21:32 +0100 | [diff] [blame] | 482 | Allow selection of the S3C24XX on-board serial ports for use as |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 483 | an virtual console. |
| 484 | |
| 485 | Even if you say Y here, the currently visible virtual console |
| 486 | (/dev/tty0) will still be used as the system console by default, but |
| 487 | you can alter that using a kernel command line option such as |
| 488 | "console=ttySACx". (Try "man bootparam" or see the documentation of |
| 489 | your boot loader about how to pass options to the kernel at |
| 490 | boot time.) |
| 491 | |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 492 | config SERIAL_S3C2400 |
| 493 | tristate "Samsung S3C2410 Serial port support" |
| 494 | depends on ARM && SERIAL_SAMSUNG && CPU_S3C2400 |
| 495 | default y if CPU_S3C2400 |
| 496 | help |
| 497 | Serial port support for the Samsung S3C2400 SoC |
| 498 | |
| 499 | config SERIAL_S3C2410 |
| 500 | tristate "Samsung S3C2410 Serial port support" |
| 501 | depends on SERIAL_SAMSUNG && CPU_S3C2410 |
| 502 | default y if CPU_S3C2410 |
| 503 | help |
| 504 | Serial port support for the Samsung S3C2410 SoC |
| 505 | |
| 506 | config SERIAL_S3C2412 |
| 507 | tristate "Samsung S3C2412/S3C2413 Serial port support" |
| 508 | depends on SERIAL_SAMSUNG && CPU_S3C2412 |
| 509 | default y if CPU_S3C2412 |
| 510 | help |
| 511 | Serial port support for the Samsung S3C2412 and S3C2413 SoC |
| 512 | |
| 513 | config SERIAL_S3C2440 |
Yauhen Kharuzhy | 4fcfce9 | 2009-08-19 16:31:06 +0300 | [diff] [blame] | 514 | tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" |
| 515 | depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 516 | default y if CPU_S3C2440 |
| 517 | default y if CPU_S3C2442 |
Yauhen Kharuzhy | 4fcfce9 | 2009-08-19 16:31:06 +0300 | [diff] [blame] | 518 | select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 519 | help |
Yauhen Kharuzhy | 4fcfce9 | 2009-08-19 16:31:06 +0300 | [diff] [blame] | 520 | Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 521 | |
Sandeep Patil | 1d4bab0 | 2008-10-21 14:06:30 +0100 | [diff] [blame] | 522 | config SERIAL_S3C24A0 |
| 523 | tristate "Samsung S3C24A0 Serial port support" |
| 524 | depends on SERIAL_SAMSUNG && CPU_S3C24A0 |
| 525 | default y if CPU_S3C24A0 |
| 526 | help |
| 527 | Serial port support for the Samsung S3C24A0 SoC |
Ben Dooks | b497549 | 2008-07-03 12:32:51 +0100 | [diff] [blame] | 528 | |
Ben Dooks | b690ace | 2008-10-21 14:07:03 +0100 | [diff] [blame] | 529 | config SERIAL_S3C6400 |
Kukjin Kim | 2555e66 | 2010-09-01 15:13:44 +0900 | [diff] [blame] | 530 | tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" |
| 531 | depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) |
Ben Dooks | 3bd9377 | 2010-01-29 10:52:02 +0900 | [diff] [blame] | 532 | select SERIAL_SAMSUNG_UARTS_4 |
Ben Dooks | b690ace | 2008-10-21 14:07:03 +0100 | [diff] [blame] | 533 | default y |
| 534 | help |
Kukjin Kim | 2555e66 | 2010-09-01 15:13:44 +0900 | [diff] [blame] | 535 | Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 |
Marek Szyprowski | cb34a67 | 2010-05-18 12:38:39 +0200 | [diff] [blame] | 536 | and S5PC100 SoCs |
Byungho Min | 433a915 | 2009-06-23 21:40:09 +0900 | [diff] [blame] | 537 | |
Thomas Abraham | d851273 | 2010-01-22 10:50:42 +0900 | [diff] [blame] | 538 | config SERIAL_S5PV210 |
| 539 | tristate "Samsung S5PV210 Serial port support" |
Jongpill Lee | acfdc56 | 2010-07-16 15:07:37 +0900 | [diff] [blame] | 540 | depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310) |
| 541 | select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310) |
Thomas Abraham | d851273 | 2010-01-22 10:50:42 +0900 | [diff] [blame] | 542 | default y |
| 543 | help |
| 544 | Serial port support for Samsung's S5P Family of SoC's |
| 545 | |
jianwei.yang | 44318fe | 2010-06-30 17:57:12 +0100 | [diff] [blame] | 546 | |
Christian Pellegrin | 1dcb884 | 2009-04-07 16:48:51 +0100 | [diff] [blame] | 547 | config SERIAL_MAX3100 |
| 548 | tristate "MAX3100 support" |
| 549 | depends on SPI |
| 550 | select SERIAL_CORE |
| 551 | help |
| 552 | MAX3100 chip support |
| 553 | |
Alan Cox | 61fd152 | 2010-06-30 17:58:38 +0100 | [diff] [blame] | 554 | config SERIAL_MAX3107 |
| 555 | tristate "MAX3107 support" |
| 556 | depends on SPI |
| 557 | select SERIAL_CORE |
| 558 | help |
| 559 | MAX3107 chip support |
| 560 | |
| 561 | config SERIAL_MAX3107_AAVA |
| 562 | tristate "MAX3107 AAVA platform support" |
| 563 | depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB |
| 564 | select SERIAL_CORE |
| 565 | help |
| 566 | Support for the MAX3107 chip configuration found on the AAVA |
| 567 | platform. Includes the extra initialisation and GPIO support |
| 568 | neded for this device. |
| 569 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 570 | config SERIAL_DZ |
| 571 | bool "DECstation DZ serial driver" |
Ralf Baechle | 875d43e | 2005-09-03 15:56:16 -0700 | [diff] [blame] | 572 | depends on MACH_DECSTATION && 32BIT |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 573 | select SERIAL_CORE |
Maciej W. Rozycki | 7287d76 | 2008-02-07 00:15:09 -0800 | [diff] [blame] | 574 | default y |
| 575 | ---help--- |
| 576 | DZ11-family serial controllers for DECstations and VAXstations, |
| 577 | including the DC7085, M7814, and M7819. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 578 | |
| 579 | config SERIAL_DZ_CONSOLE |
| 580 | bool "Support console on DECstation DZ serial driver" |
| 581 | depends on SERIAL_DZ=y |
| 582 | select SERIAL_CORE_CONSOLE |
Maciej W. Rozycki | 7287d76 | 2008-02-07 00:15:09 -0800 | [diff] [blame] | 583 | default y |
| 584 | ---help--- |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 585 | If you say Y here, it will be possible to use a serial port as the |
| 586 | system console (the system console is the device which receives all |
| 587 | kernel messages and warnings and which allows logins in single user |
Maciej W. Rozycki | 7287d76 | 2008-02-07 00:15:09 -0800 | [diff] [blame] | 588 | mode). |
| 589 | |
| 590 | Note that the firmware uses ttyS3 as the serial console on |
| 591 | DECstations that use this driver. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 592 | |
| 593 | If unsure, say Y. |
| 594 | |
Maciej W. Rozycki | 8b4a408 | 2007-07-18 00:49:11 -0700 | [diff] [blame] | 595 | config SERIAL_ZS |
| 596 | tristate "DECstation Z85C30 serial support" |
| 597 | depends on MACH_DECSTATION |
| 598 | select SERIAL_CORE |
| 599 | default y |
| 600 | ---help--- |
| 601 | Support for the Zilog 85C350 serial communications controller used |
| 602 | for serial ports in newer DECstation systems. These include the |
| 603 | DECsystem 5900 and all models of the DECstation and DECsystem 5000 |
| 604 | systems except from model 200. |
| 605 | |
| 606 | If unsure, say Y. To compile this driver as a module, choose M here: |
| 607 | the module will be called zs. |
| 608 | |
| 609 | config SERIAL_ZS_CONSOLE |
| 610 | bool "Support for console on a DECstation Z85C30 serial port" |
| 611 | depends on SERIAL_ZS=y |
| 612 | select SERIAL_CORE_CONSOLE |
| 613 | default y |
| 614 | ---help--- |
| 615 | If you say Y here, it will be possible to use a serial port as the |
| 616 | system console (the system console is the device which receives all |
| 617 | kernel messages and warnings and which allows logins in single user |
| 618 | mode). |
| 619 | |
| 620 | Note that the firmware uses ttyS1 as the serial console on the |
| 621 | Maxine and ttyS3 on the others using this driver. |
| 622 | |
| 623 | If unsure, say Y. |
| 624 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 625 | config SERIAL_21285 |
| 626 | tristate "DC21285 serial port support" |
| 627 | depends on ARM && FOOTBRIDGE |
| 628 | select SERIAL_CORE |
| 629 | help |
| 630 | If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ |
| 631 | PCI bridge you can enable its onboard serial port by enabling this |
| 632 | option. |
| 633 | |
| 634 | config SERIAL_21285_CONSOLE |
| 635 | bool "Console on DC21285 serial port" |
| 636 | depends on SERIAL_21285=y |
| 637 | select SERIAL_CORE_CONSOLE |
| 638 | help |
| 639 | If you have enabled the serial port on the 21285 footbridge you can |
| 640 | make it the console by answering Y to this option. |
| 641 | |
| 642 | Even if you say Y here, the currently visible virtual console |
| 643 | (/dev/tty0) will still be used as the system console by default, but |
| 644 | you can alter that using a kernel command line option such as |
| 645 | "console=ttyFB". (Try "man bootparam" or see the documentation of |
| 646 | your boot loader (lilo or loadlin) about how to pass options to the |
| 647 | kernel at boot time.) |
| 648 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 649 | config SERIAL_MPSC |
| 650 | bool "Marvell MPSC serial port support" |
| 651 | depends on PPC32 && MV64X60 |
| 652 | select SERIAL_CORE |
| 653 | help |
| 654 | Say Y here if you want to use the Marvell MPSC serial controller. |
| 655 | |
| 656 | config SERIAL_MPSC_CONSOLE |
| 657 | bool "Support for console on Marvell MPSC serial port" |
| 658 | depends on SERIAL_MPSC |
| 659 | select SERIAL_CORE_CONSOLE |
| 660 | help |
| 661 | Say Y here if you want to support a serial console on a Marvell MPSC. |
| 662 | |
| 663 | config SERIAL_PXA |
| 664 | bool "PXA serial port support" |
Eric Miao | 5642255 | 2009-02-05 13:42:47 +0800 | [diff] [blame] | 665 | depends on ARCH_PXA || ARCH_MMP |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 666 | select SERIAL_CORE |
| 667 | help |
| 668 | If you have a machine based on an Intel XScale PXA2xx CPU you |
| 669 | can enable its onboard serial ports by enabling this option. |
| 670 | |
| 671 | config SERIAL_PXA_CONSOLE |
| 672 | bool "Console on PXA serial port" |
| 673 | depends on SERIAL_PXA |
| 674 | select SERIAL_CORE_CONSOLE |
| 675 | help |
| 676 | If you have enabled the serial port on the Intel XScale PXA |
| 677 | CPU you can make it the console by answering Y to this option. |
| 678 | |
| 679 | Even if you say Y here, the currently visible virtual console |
| 680 | (/dev/tty0) will still be used as the system console by default, but |
| 681 | you can alter that using a kernel command line option such as |
| 682 | "console=ttySA0". (Try "man bootparam" or see the documentation of |
| 683 | your boot loader (lilo or loadlin) about how to pass options to the |
| 684 | kernel at boot time.) |
| 685 | |
| 686 | config SERIAL_SA1100 |
| 687 | bool "SA1100 serial port support" |
| 688 | depends on ARM && ARCH_SA1100 |
| 689 | select SERIAL_CORE |
| 690 | help |
| 691 | If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you |
| 692 | can enable its onboard serial port by enabling this option. |
| 693 | Please read <file:Documentation/arm/SA1100/serial_UART> for further |
| 694 | info. |
| 695 | |
| 696 | config SERIAL_SA1100_CONSOLE |
| 697 | bool "Console on SA1100 serial port" |
| 698 | depends on SERIAL_SA1100 |
| 699 | select SERIAL_CORE_CONSOLE |
| 700 | help |
| 701 | If you have enabled the serial port on the SA1100/SA1110 StrongARM |
| 702 | CPU you can make it the console by answering Y to this option. |
| 703 | |
| 704 | Even if you say Y here, the currently visible virtual console |
| 705 | (/dev/tty0) will still be used as the system console by default, but |
| 706 | you can alter that using a kernel command line option such as |
| 707 | "console=ttySA0". (Try "man bootparam" or see the documentation of |
| 708 | your boot loader (lilo or loadlin) about how to pass options to the |
| 709 | kernel at boot time.) |
| 710 | |
Feng Tang | 2251099 | 2010-06-16 14:46:09 +0100 | [diff] [blame] | 711 | config SERIAL_MRST_MAX3110 |
| 712 | tristate "SPI UART driver for Max3110" |
| 713 | depends on SPI_DW_PCI |
| 714 | select SERIAL_CORE |
| 715 | select SERIAL_CORE_CONSOLE |
| 716 | help |
| 717 | This is the UART protocol driver for the MAX3110 device on |
| 718 | the Intel Moorestown platform. On other systems use the max3100 |
| 719 | driver. |
| 720 | |
Feng Tang | d843fc6 | 2010-07-27 08:20:22 +0100 | [diff] [blame] | 721 | config SERIAL_MFD_HSU |
| 722 | tristate "Medfield High Speed UART support" |
| 723 | depends on PCI |
| 724 | select SERIAL_CORE |
| 725 | |
| 726 | config SERIAL_MFD_HSU_CONSOLE |
| 727 | boolean "Medfile HSU serial console support" |
| 728 | depends on SERIAL_MFD_HSU=y |
| 729 | select SERIAL_CORE_CONSOLE |
| 730 | |
Bryan Wu | 194de56 | 2007-05-06 14:50:30 -0700 | [diff] [blame] | 731 | config SERIAL_BFIN |
| 732 | tristate "Blackfin serial port support" |
Mike Frysinger | 529a73f | 2007-11-23 14:28:44 +0800 | [diff] [blame] | 733 | depends on BLACKFIN |
Bryan Wu | 194de56 | 2007-05-06 14:50:30 -0700 | [diff] [blame] | 734 | select SERIAL_CORE |
| 735 | select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561) |
| 736 | help |
| 737 | Add support for the built-in UARTs on the Blackfin. |
| 738 | |
| 739 | To compile this driver as a module, choose M here: the |
| 740 | module will be called bfin_5xx. |
| 741 | |
| 742 | config SERIAL_BFIN_CONSOLE |
| 743 | bool "Console on Blackfin serial port" |
Adrian Bunk | 7111de7 | 2007-09-11 15:24:13 -0700 | [diff] [blame] | 744 | depends on SERIAL_BFIN=y |
Bryan Wu | 194de56 | 2007-05-06 14:50:30 -0700 | [diff] [blame] | 745 | select SERIAL_CORE_CONSOLE |
| 746 | |
| 747 | choice |
| 748 | prompt "UART Mode" |
| 749 | depends on SERIAL_BFIN |
| 750 | default SERIAL_BFIN_DMA |
| 751 | help |
| 752 | This driver supports the built-in serial ports of the Blackfin family |
| 753 | of CPUs |
| 754 | |
| 755 | config SERIAL_BFIN_DMA |
| 756 | bool "DMA mode" |
Mike Frysinger | 51a2301 | 2009-04-07 16:52:49 +0100 | [diff] [blame] | 757 | depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n |
Bryan Wu | 194de56 | 2007-05-06 14:50:30 -0700 | [diff] [blame] | 758 | help |
| 759 | This driver works under DMA mode. If this option is selected, the |
| 760 | blackfin simple dma driver is also enabled. |
| 761 | |
| 762 | config SERIAL_BFIN_PIO |
| 763 | bool "PIO mode" |
| 764 | help |
| 765 | This driver works under PIO mode. |
| 766 | |
| 767 | endchoice |
| 768 | |
| 769 | config SERIAL_BFIN_UART0 |
| 770 | bool "Enable UART0" |
| 771 | depends on SERIAL_BFIN |
| 772 | help |
| 773 | Enable UART0 |
| 774 | |
| 775 | config BFIN_UART0_CTSRTS |
| 776 | bool "Enable UART0 hardware flow control" |
| 777 | depends on SERIAL_BFIN_UART0 |
| 778 | help |
Sonic Zhang | 57afb39 | 2009-09-09 10:46:19 +0000 | [diff] [blame] | 779 | Enable hardware flow control in the driver. |
Bryan Wu | 194de56 | 2007-05-06 14:50:30 -0700 | [diff] [blame] | 780 | |
| 781 | config SERIAL_BFIN_UART1 |
| 782 | bool "Enable UART1" |
Michael Hennerich | 0954556 | 2008-02-02 15:58:30 +0800 | [diff] [blame] | 783 | depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) |
Bryan Wu | 194de56 | 2007-05-06 14:50:30 -0700 | [diff] [blame] | 784 | help |
| 785 | Enable UART1 |
| 786 | |
| 787 | config BFIN_UART1_CTSRTS |
| 788 | bool "Enable UART1 hardware flow control" |
| 789 | depends on SERIAL_BFIN_UART1 |
| 790 | help |
Sonic Zhang | 57afb39 | 2009-09-09 10:46:19 +0000 | [diff] [blame] | 791 | Enable hardware flow control in the driver. |
Bryan Wu | 194de56 | 2007-05-06 14:50:30 -0700 | [diff] [blame] | 792 | |
Roy Huang | f4d640c9 | 2007-07-12 16:43:46 +0800 | [diff] [blame] | 793 | config SERIAL_BFIN_UART2 |
| 794 | bool "Enable UART2" |
Michael Hennerich | f933d3c | 2009-04-06 17:32:21 +0100 | [diff] [blame] | 795 | depends on SERIAL_BFIN && (BF54x || BF538 || BF539) |
Roy Huang | f4d640c9 | 2007-07-12 16:43:46 +0800 | [diff] [blame] | 796 | help |
| 797 | Enable UART2 |
| 798 | |
| 799 | config BFIN_UART2_CTSRTS |
| 800 | bool "Enable UART2 hardware flow control" |
| 801 | depends on SERIAL_BFIN_UART2 |
| 802 | help |
Sonic Zhang | 57afb39 | 2009-09-09 10:46:19 +0000 | [diff] [blame] | 803 | Enable hardware flow control in the driver. |
Roy Huang | f4d640c9 | 2007-07-12 16:43:46 +0800 | [diff] [blame] | 804 | |
| 805 | config SERIAL_BFIN_UART3 |
| 806 | bool "Enable UART3" |
| 807 | depends on SERIAL_BFIN && (BF54x) |
| 808 | help |
| 809 | Enable UART3 |
| 810 | |
| 811 | config BFIN_UART3_CTSRTS |
| 812 | bool "Enable UART3 hardware flow control" |
| 813 | depends on SERIAL_BFIN_UART3 |
| 814 | help |
Sonic Zhang | 57afb39 | 2009-09-09 10:46:19 +0000 | [diff] [blame] | 815 | Enable hardware flow control in the driver. |
Sonic Zhang | d307d36 | 2009-04-07 16:52:26 +0100 | [diff] [blame] | 816 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 817 | config SERIAL_IMX |
| 818 | bool "IMX serial port support" |
Sascha Hauer | e3d13ff | 2008-07-05 10:02:48 +0200 | [diff] [blame] | 819 | depends on ARM && (ARCH_IMX || ARCH_MXC) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 820 | select SERIAL_CORE |
Oskar Schirmer | 534fca0 | 2009-06-11 14:52:23 +0100 | [diff] [blame] | 821 | select RATIONAL |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 822 | help |
| 823 | If you have a machine based on a Motorola IMX CPU you |
| 824 | can enable its onboard serial port by enabling this option. |
| 825 | |
| 826 | config SERIAL_IMX_CONSOLE |
| 827 | bool "Console on IMX serial port" |
| 828 | depends on SERIAL_IMX |
| 829 | select SERIAL_CORE_CONSOLE |
| 830 | help |
| 831 | If you have enabled the serial port on the Motorola IMX |
| 832 | CPU you can make it the console by answering Y to this option. |
| 833 | |
| 834 | Even if you say Y here, the currently visible virtual console |
| 835 | (/dev/tty0) will still be used as the system console by default, but |
| 836 | you can alter that using a kernel command line option such as |
| 837 | "console=ttySA0". (Try "man bootparam" or see the documentation of |
| 838 | your boot loader (lilo or loadlin) about how to pass options to the |
| 839 | kernel at boot time.) |
| 840 | |
Peter Korsgaard | 238b872 | 2006-12-06 20:35:17 -0800 | [diff] [blame] | 841 | config SERIAL_UARTLITE |
| 842 | tristate "Xilinx uartlite serial port support" |
Richard Röjfors | 447e446 | 2009-10-01 15:44:07 -0700 | [diff] [blame] | 843 | depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE |
Peter Korsgaard | 238b872 | 2006-12-06 20:35:17 -0800 | [diff] [blame] | 844 | select SERIAL_CORE |
| 845 | help |
| 846 | Say Y here if you want to use the Xilinx uartlite serial controller. |
| 847 | |
| 848 | To compile this driver as a module, choose M here: the |
Pavel Machek | 4737f09 | 2009-06-05 00:44:53 +0200 | [diff] [blame] | 849 | module will be called uartlite. |
Peter Korsgaard | 238b872 | 2006-12-06 20:35:17 -0800 | [diff] [blame] | 850 | |
| 851 | config SERIAL_UARTLITE_CONSOLE |
| 852 | bool "Support for console on Xilinx uartlite serial port" |
| 853 | depends on SERIAL_UARTLITE=y |
| 854 | select SERIAL_CORE_CONSOLE |
| 855 | help |
| 856 | Say Y here if you wish to use a Xilinx uartlite as the system |
| 857 | console (the system console is the device which receives all kernel |
| 858 | messages and warnings and which allows logins in single user mode). |
| 859 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 860 | config SERIAL_SUNCORE |
| 861 | bool |
Adrian Bunk | 0b57ee9 | 2005-12-22 21:03:47 -0800 | [diff] [blame] | 862 | depends on SPARC |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 863 | select SERIAL_CORE |
| 864 | select SERIAL_CORE_CONSOLE |
| 865 | default y |
| 866 | |
| 867 | config SERIAL_SUNZILOG |
| 868 | tristate "Sun Zilog8530 serial support" |
Adrian Bunk | 0b57ee9 | 2005-12-22 21:03:47 -0800 | [diff] [blame] | 869 | depends on SPARC |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 870 | help |
| 871 | This driver supports the Zilog8530 serial ports found on many Sparc |
| 872 | systems. Say Y or M if you want to be able to these serial ports. |
| 873 | |
| 874 | config SERIAL_SUNZILOG_CONSOLE |
| 875 | bool "Console on Sun Zilog8530 serial port" |
| 876 | depends on SERIAL_SUNZILOG=y |
| 877 | help |
| 878 | If you would like to be able to use the Zilog8530 serial port |
| 879 | on your Sparc system as the console, you can do so by answering |
| 880 | Y to this option. |
| 881 | |
| 882 | config SERIAL_SUNSU |
| 883 | tristate "Sun SU serial support" |
Adrian Bunk | 0b57ee9 | 2005-12-22 21:03:47 -0800 | [diff] [blame] | 884 | depends on SPARC && PCI |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 885 | help |
| 886 | This driver supports the 8250 serial ports that run the keyboard and |
| 887 | mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able |
| 888 | to these serial ports. |
| 889 | |
| 890 | config SERIAL_SUNSU_CONSOLE |
| 891 | bool "Console on Sun SU serial port" |
| 892 | depends on SERIAL_SUNSU=y |
| 893 | help |
| 894 | If you would like to be able to use the SU serial port |
| 895 | on your Sparc system as the console, you can do so by answering |
| 896 | Y to this option. |
| 897 | |
| 898 | config SERIAL_MUX |
| 899 | tristate "Serial MUX support" |
Matthew Wilcox | 305f516 | 2005-11-18 16:17:50 -0500 | [diff] [blame] | 900 | depends on GSC |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 901 | select SERIAL_CORE |
| 902 | default y |
| 903 | ---help--- |
| 904 | Saying Y here will enable the hardware MUX serial driver for |
Carlos O'Donell | e45da35 | 2006-09-16 14:35:51 -0400 | [diff] [blame] | 905 | the Nova, K class systems and D class with a 'remote control card'. |
| 906 | The hardware MUX is not 8250/16550 compatible therefore the |
| 907 | /dev/ttyB0 device is shared between the Serial MUX and the PDC |
| 908 | software console. The following steps need to be completed to use |
| 909 | the Serial MUX: |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 910 | |
| 911 | 1. create the device entry (mknod /dev/ttyB0 c 11 0) |
| 912 | 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 |
| 913 | 3. Add device ttyB0 to /etc/securetty (if you want to log on as |
| 914 | root on this console.) |
| 915 | 4. Change the kernel command console parameter to: console=ttyB0 |
| 916 | |
| 917 | config SERIAL_MUX_CONSOLE |
Adrian Bunk | 7111de7 | 2007-09-11 15:24:13 -0700 | [diff] [blame] | 918 | bool "Support for console on serial MUX" |
| 919 | depends on SERIAL_MUX=y |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 920 | select SERIAL_CORE_CONSOLE |
Adrian Bunk | 7111de7 | 2007-09-11 15:24:13 -0700 | [diff] [blame] | 921 | default y |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 922 | |
| 923 | config PDC_CONSOLE |
| 924 | bool "PDC software console support" |
| 925 | depends on PARISC && !SERIAL_MUX && VT |
| 926 | default n |
| 927 | help |
| 928 | Saying Y here will enable the software based PDC console to be |
| 929 | used as the system console. This is useful for machines in |
| 930 | which the hardware based console has not been written yet. The |
| 931 | following steps must be competed to use the PDC console: |
| 932 | |
| 933 | 1. create the device entry (mknod /dev/ttyB0 c 11 0) |
| 934 | 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 |
| 935 | 3. Add device ttyB0 to /etc/securetty (if you want to log on as |
| 936 | root on this console.) |
| 937 | 4. Change the kernel command console parameter to: console=ttyB0 |
| 938 | |
| 939 | config SERIAL_SUNSAB |
| 940 | tristate "Sun Siemens SAB82532 serial support" |
Adrian Bunk | 0b57ee9 | 2005-12-22 21:03:47 -0800 | [diff] [blame] | 941 | depends on SPARC && PCI |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 942 | help |
| 943 | This driver supports the Siemens SAB82532 DUSCC serial ports on newer |
| 944 | (PCI) UltraSPARC systems. Say Y or M if you want to be able to these |
| 945 | serial ports. |
| 946 | |
| 947 | config SERIAL_SUNSAB_CONSOLE |
| 948 | bool "Console on Sun Siemens SAB82532 serial port" |
| 949 | depends on SERIAL_SUNSAB=y |
| 950 | help |
| 951 | If you would like to be able to use the SAB82532 serial port |
| 952 | on your Sparc system as the console, you can do so by answering |
| 953 | Y to this option. |
| 954 | |
David S. Miller | 02fd473 | 2006-02-11 02:25:21 -0800 | [diff] [blame] | 955 | config SERIAL_SUNHV |
| 956 | bool "Sun4v Hypervisor Console support" |
| 957 | depends on SPARC64 |
| 958 | help |
| 959 | This driver supports the console device found on SUN4V Sparc |
| 960 | systems. Say Y if you want to be able to use this device. |
| 961 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 962 | config SERIAL_IP22_ZILOG |
Thomas Bogendoerfer | 5057c98 | 2008-02-06 01:37:26 -0800 | [diff] [blame] | 963 | tristate "SGI Zilog8530 serial support" |
| 964 | depends on SGI_HAS_ZILOG |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 965 | select SERIAL_CORE |
| 966 | help |
Thomas Bogendoerfer | 5057c98 | 2008-02-06 01:37:26 -0800 | [diff] [blame] | 967 | This driver supports the Zilog8530 serial ports found on SGI |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 968 | systems. Say Y or M if you want to be able to these serial ports. |
| 969 | |
| 970 | config SERIAL_IP22_ZILOG_CONSOLE |
Thomas Bogendoerfer | 5057c98 | 2008-02-06 01:37:26 -0800 | [diff] [blame] | 971 | bool "Console on SGI Zilog8530 serial port" |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 972 | depends on SERIAL_IP22_ZILOG=y |
| 973 | select SERIAL_CORE_CONSOLE |
| 974 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 975 | config SERIAL_SH_SCI |
Paul Mundt | ecd9561 | 2006-09-27 17:32:30 +0900 | [diff] [blame] | 976 | tristate "SuperH SCI(F) serial port support" |
Magnus Damm | 8a77b8d | 2010-02-05 11:15:33 +0000 | [diff] [blame] | 977 | depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 978 | select SERIAL_CORE |
| 979 | |
Paul Mundt | ecd9561 | 2006-09-27 17:32:30 +0900 | [diff] [blame] | 980 | config SERIAL_SH_SCI_NR_UARTS |
| 981 | int "Maximum number of SCI(F) serial ports" |
| 982 | depends on SERIAL_SH_SCI |
| 983 | default "2" |
| 984 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 985 | config SERIAL_SH_SCI_CONSOLE |
Paul Mundt | ecd9561 | 2006-09-27 17:32:30 +0900 | [diff] [blame] | 986 | bool "Support for console on SuperH SCI(F)" |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 987 | depends on SERIAL_SH_SCI=y |
| 988 | select SERIAL_CORE_CONSOLE |
| 989 | |
Guennadi Liakhovetski | 73a19e4 | 2010-03-02 11:39:15 +0900 | [diff] [blame] | 990 | config SERIAL_SH_SCI_DMA |
| 991 | bool "DMA support" |
| 992 | depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL |
| 993 | |
Vitaly Wool | de8211b | 2007-02-14 00:33:09 -0800 | [diff] [blame] | 994 | config SERIAL_PNX8XXX |
| 995 | bool "Enable PNX8XXX SoCs' UART Support" |
Ihar Hrachyshka | 11455be | 2009-01-27 11:50:46 +0000 | [diff] [blame] | 996 | depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) |
Vitaly Wool | de8211b | 2007-02-14 00:33:09 -0800 | [diff] [blame] | 997 | select SERIAL_CORE |
| 998 | help |
| 999 | If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 |
| 1000 | and you want to use serial ports, say Y. Otherwise, say N. |
| 1001 | |
| 1002 | config SERIAL_PNX8XXX_CONSOLE |
| 1003 | bool "Enable PNX8XX0 serial console" |
| 1004 | depends on SERIAL_PNX8XXX |
| 1005 | select SERIAL_CORE_CONSOLE |
| 1006 | help |
| 1007 | If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 |
| 1008 | and you want to use serial console, say Y. Otherwise, say N. |
| 1009 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1010 | config SERIAL_CORE |
| 1011 | tristate |
| 1012 | |
| 1013 | config SERIAL_CORE_CONSOLE |
| 1014 | bool |
| 1015 | |
Jason Wessel | f2d937f | 2008-04-17 20:05:37 +0200 | [diff] [blame] | 1016 | config CONSOLE_POLL |
| 1017 | bool |
| 1018 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1019 | config SERIAL_68328 |
| 1020 | bool "68328 serial support" |
| 1021 | depends on M68328 || M68EZ328 || M68VZ328 |
| 1022 | help |
| 1023 | This driver supports the built-in serial port of the Motorola 68328 |
Matt LaPlante | 0950960 | 2006-10-03 22:31:37 +0200 | [diff] [blame] | 1024 | (standard, EZ and VZ varieties). |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1025 | |
| 1026 | config SERIAL_68328_RTS_CTS |
| 1027 | bool "Support RTS/CTS on 68328 serial port" |
| 1028 | depends on SERIAL_68328 |
| 1029 | |
Greg Ungerer | ae1b5f0 | 2008-02-01 17:32:00 +1000 | [diff] [blame] | 1030 | config SERIAL_MCF |
Adrian Bunk | 02f11f3 | 2008-10-13 10:31:59 +0100 | [diff] [blame] | 1031 | bool "Coldfire serial support" |
Greg Ungerer | ae1b5f0 | 2008-02-01 17:32:00 +1000 | [diff] [blame] | 1032 | depends on COLDFIRE |
| 1033 | select SERIAL_CORE |
| 1034 | help |
Adrian Bunk | 02f11f3 | 2008-10-13 10:31:59 +0100 | [diff] [blame] | 1035 | This serial driver supports the Freescale Coldfire serial ports. |
Greg Ungerer | ae1b5f0 | 2008-02-01 17:32:00 +1000 | [diff] [blame] | 1036 | |
| 1037 | config SERIAL_MCF_BAUDRATE |
| 1038 | int "Default baudrate for Coldfire serial ports" |
| 1039 | depends on SERIAL_MCF |
| 1040 | default 19200 |
| 1041 | help |
| 1042 | This setting lets you define what the default baudrate is for the |
| 1043 | ColdFire serial ports. The usual default varies from board to board, |
| 1044 | and this setting is a way of catering for that. |
| 1045 | |
| 1046 | config SERIAL_MCF_CONSOLE |
| 1047 | bool "Coldfire serial console support" |
| 1048 | depends on SERIAL_MCF |
| 1049 | select SERIAL_CORE_CONSOLE |
| 1050 | help |
| 1051 | Enable a ColdFire internal serial port to be the system console. |
| 1052 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1053 | config SERIAL_68360_SMC |
| 1054 | bool "68360 SMC uart support" |
| 1055 | depends on M68360 |
| 1056 | help |
| 1057 | This driver supports the SMC serial ports of the Motorola 68360 CPU. |
| 1058 | |
| 1059 | config SERIAL_68360_SCC |
| 1060 | bool "68360 SCC uart support" |
| 1061 | depends on M68360 |
| 1062 | help |
| 1063 | This driver supports the SCC serial ports of the Motorola 68360 CPU. |
| 1064 | |
| 1065 | config SERIAL_68360 |
| 1066 | bool |
| 1067 | depends on SERIAL_68360_SMC || SERIAL_68360_SCC |
| 1068 | default y |
| 1069 | |
| 1070 | config SERIAL_PMACZILOG |
Finn Thain | ec9cbe0 | 2009-11-17 20:04:44 +1100 | [diff] [blame] | 1071 | tristate "Mac or PowerMac z85c30 ESCC support" |
| 1072 | depends on (M68K && MAC) || (PPC_OF && PPC_PMAC) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1073 | select SERIAL_CORE |
| 1074 | help |
| 1075 | This driver supports the Zilog z85C30 serial ports found on |
Finn Thain | ec9cbe0 | 2009-11-17 20:04:44 +1100 | [diff] [blame] | 1076 | (Power)Mac machines. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1077 | Say Y or M if you want to be able to these serial ports. |
| 1078 | |
David Woodhouse | e4533b2 | 2007-04-05 00:19:43 +1000 | [diff] [blame] | 1079 | config SERIAL_PMACZILOG_TTYS |
| 1080 | bool "Use ttySn device nodes for Zilog z85c30" |
| 1081 | depends on SERIAL_PMACZILOG |
| 1082 | help |
| 1083 | The pmac_zilog driver for the z85C30 chip on many powermacs |
| 1084 | historically used the device numbers for /dev/ttySn. The |
| 1085 | 8250 serial port driver also uses these numbers, which means |
| 1086 | the two drivers being unable to coexist; you could not use |
| 1087 | both z85C30 and 8250 type ports at the same time. |
| 1088 | |
| 1089 | If this option is not selected, the pmac_zilog driver will |
| 1090 | use the device numbers allocated for /dev/ttyPZn. This allows |
| 1091 | the pmac_zilog and 8250 drivers to co-exist, but may cause |
| 1092 | existing userspace setups to break. Programs that need to |
| 1093 | access the built-in serial ports on powermacs will need to |
| 1094 | be reconfigured to use /dev/ttyPZn instead of /dev/ttySn. |
| 1095 | |
| 1096 | If you enable this option, any z85c30 ports in the system will |
| 1097 | be registered as ttyS0 onwards as in the past, and you will be |
| 1098 | unable to use the 8250 module for PCMCIA or other 16C550-style |
| 1099 | UARTs. |
| 1100 | |
Finn Thain | ec9cbe0 | 2009-11-17 20:04:44 +1100 | [diff] [blame] | 1101 | Say N unless you need the z85c30 ports on your (Power)Mac |
David Woodhouse | e4533b2 | 2007-04-05 00:19:43 +1000 | [diff] [blame] | 1102 | to appear as /dev/ttySn. |
| 1103 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1104 | config SERIAL_PMACZILOG_CONSOLE |
Finn Thain | ec9cbe0 | 2009-11-17 20:04:44 +1100 | [diff] [blame] | 1105 | bool "Console on Mac or PowerMac z85c30 serial port" |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1106 | depends on SERIAL_PMACZILOG=y |
| 1107 | select SERIAL_CORE_CONSOLE |
| 1108 | help |
| 1109 | If you would like to be able to use the z85c30 serial port |
Finn Thain | ec9cbe0 | 2009-11-17 20:04:44 +1100 | [diff] [blame] | 1110 | on your (Power)Mac as the console, you can do so by answering |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1111 | Y to this option. |
| 1112 | |
| 1113 | config SERIAL_LH7A40X |
| 1114 | tristate "Sharp LH7A40X embedded UART support" |
| 1115 | depends on ARM && ARCH_LH7A40X |
| 1116 | select SERIAL_CORE |
| 1117 | help |
| 1118 | This enables support for the three on-board UARTs of the |
| 1119 | Sharp LH7A40X series CPUs. Choose Y or M. |
| 1120 | |
| 1121 | config SERIAL_LH7A40X_CONSOLE |
| 1122 | bool "Support for console on Sharp LH7A40X serial port" |
| 1123 | depends on SERIAL_LH7A40X=y |
| 1124 | select SERIAL_CORE_CONSOLE |
| 1125 | help |
| 1126 | Say Y here if you wish to use one of the serial ports as the |
| 1127 | system console--the system console is the device which |
| 1128 | receives all kernel messages and warnings and which allows |
| 1129 | logins in single user mode. |
| 1130 | |
| 1131 | Even if you say Y here, the currently visible framebuffer console |
| 1132 | (/dev/tty0) will still be used as the default system console, but |
| 1133 | you can alter that using a kernel command line, for example |
| 1134 | "console=ttyAM1". |
| 1135 | |
| 1136 | config SERIAL_CPM |
| 1137 | tristate "CPM SCC/SMC serial port support" |
| 1138 | depends on CPM2 || 8xx |
| 1139 | select SERIAL_CORE |
| 1140 | help |
| 1141 | This driver supports the SCC and SMC serial ports on Motorola |
| 1142 | embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) |
| 1143 | |
| 1144 | config SERIAL_CPM_CONSOLE |
| 1145 | bool "Support for console on CPM SCC/SMC serial port" |
| 1146 | depends on SERIAL_CPM=y |
| 1147 | select SERIAL_CORE_CONSOLE |
| 1148 | help |
| 1149 | Say Y here if you wish to use a SCC or SMC CPM UART as the system |
| 1150 | console (the system console is the device which receives all kernel |
| 1151 | messages and warnings and which allows logins in single user mode). |
| 1152 | |
| 1153 | Even if you say Y here, the currently visible framebuffer console |
| 1154 | (/dev/tty0) will still be used as the system console by default, but |
| 1155 | you can alter that using a kernel command line option such as |
| 1156 | "console=ttyCPM0". (Try "man bootparam" or see the documentation of |
| 1157 | your boot loader (lilo or loadlin) about how to pass options to the |
| 1158 | kernel at boot time.) |
| 1159 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1160 | config SERIAL_SGI_L1_CONSOLE |
| 1161 | bool "SGI Altix L1 serial console support" |
| 1162 | depends on IA64_GENERIC || IA64_SGI_SN2 |
| 1163 | select SERIAL_CORE |
| 1164 | select SERIAL_CORE_CONSOLE |
| 1165 | help |
| 1166 | If you have an SGI Altix and you would like to use the system |
| 1167 | controller serial port as your console (you want this!), |
| 1168 | say Y. Otherwise, say N. |
| 1169 | |
| 1170 | config SERIAL_MPC52xx |
John Rigby | 25ae3a0 | 2008-01-29 04:28:56 +1100 | [diff] [blame] | 1171 | tristate "Freescale MPC52xx/MPC512x family PSC serial support" |
| 1172 | depends on PPC_MPC52xx || PPC_MPC512x |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1173 | select SERIAL_CORE |
| 1174 | help |
John Rigby | 25ae3a0 | 2008-01-29 04:28:56 +1100 | [diff] [blame] | 1175 | This driver supports MPC52xx and MPC512x PSC serial ports. If you would |
| 1176 | like to use them, you must answer Y or M to this option. Note that |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1177 | for use as console, it must be included in kernel and not as a |
| 1178 | module. |
| 1179 | |
| 1180 | config SERIAL_MPC52xx_CONSOLE |
John Rigby | 25ae3a0 | 2008-01-29 04:28:56 +1100 | [diff] [blame] | 1181 | bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port" |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1182 | depends on SERIAL_MPC52xx=y |
| 1183 | select SERIAL_CORE_CONSOLE |
| 1184 | help |
| 1185 | Select this options if you'd like to use one of the PSC serial port |
| 1186 | of the Freescale MPC52xx family as a console. |
| 1187 | |
| 1188 | config SERIAL_MPC52xx_CONSOLE_BAUD |
John Rigby | 25ae3a0 | 2008-01-29 04:28:56 +1100 | [diff] [blame] | 1189 | int "Freescale MPC52xx/MPC512x family PSC serial port baud" |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1190 | depends on SERIAL_MPC52xx_CONSOLE=y |
| 1191 | default "9600" |
| 1192 | help |
| 1193 | Select the MPC52xx console baud rate. |
| 1194 | This value is only used if the bootloader doesn't pass in the |
| 1195 | console baudrate |
| 1196 | |
| 1197 | config SERIAL_ICOM |
| 1198 | tristate "IBM Multiport Serial Adapter" |
Stephen Rothwell | 145d01e | 2005-06-21 17:15:52 -0700 | [diff] [blame] | 1199 | depends on PCI && (PPC_ISERIES || PPC_PSERIES) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1200 | select SERIAL_CORE |
maximilian attems | cb2fc53 | 2006-03-25 17:44:20 +0000 | [diff] [blame] | 1201 | select FW_LOADER |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1202 | help |
| 1203 | This driver is for a family of multiport serial adapters |
| 1204 | including 2 port RVX, 2 port internal modem, 4 port internal |
| 1205 | modem and a split 1 port RVX and 1 port internal modem. |
| 1206 | |
| 1207 | This driver can also be built as a module. If so, the module |
| 1208 | will be called icom. |
| 1209 | |
| 1210 | config SERIAL_M32R_SIO |
| 1211 | bool "M32R SIO I/F" |
| 1212 | depends on M32R |
| 1213 | default y |
| 1214 | select SERIAL_CORE |
| 1215 | help |
| 1216 | Say Y here if you want to use the M32R serial controller. |
| 1217 | |
| 1218 | config SERIAL_M32R_SIO_CONSOLE |
| 1219 | bool "use SIO console" |
| 1220 | depends on SERIAL_M32R_SIO=y |
| 1221 | select SERIAL_CORE_CONSOLE |
| 1222 | help |
| 1223 | Say Y here if you want to support a serial console. |
| 1224 | |
| 1225 | If you use an M3T-M32700UT or an OPSPUT platform, |
| 1226 | please say also y for SERIAL_M32R_PLDSIO. |
| 1227 | |
| 1228 | config SERIAL_M32R_PLDSIO |
| 1229 | bool "M32R SIO I/F on a PLD" |
Adrian Bunk | d600b97 | 2006-01-13 21:57:22 +0000 | [diff] [blame] | 1230 | depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1231 | default n |
| 1232 | help |
| 1233 | Say Y here if you want to use the M32R serial controller |
| 1234 | on a PLD (Programmable Logic Device). |
| 1235 | |
| 1236 | If you use an M3T-M32700UT or an OPSPUT platform, |
| 1237 | please say Y. |
| 1238 | |
| 1239 | config SERIAL_TXX9 |
| 1240 | bool "TMPTX39XX/49XX SIO support" |
Robert P. J. Day | bef1f40 | 2006-12-12 20:04:19 +0100 | [diff] [blame] | 1241 | depends on HAS_TXX9_SERIAL |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1242 | select SERIAL_CORE |
| 1243 | default y |
| 1244 | |
| 1245 | config HAS_TXX9_SERIAL |
| 1246 | bool |
| 1247 | |
Atsushi Nemoto | 138c5d2 | 2007-02-10 01:45:05 -0800 | [diff] [blame] | 1248 | config SERIAL_TXX9_NR_UARTS |
| 1249 | int "Maximum number of TMPTX39XX/49XX SIO ports" |
| 1250 | depends on SERIAL_TXX9 |
| 1251 | default "6" |
| 1252 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1253 | config SERIAL_TXX9_CONSOLE |
| 1254 | bool "TMPTX39XX/49XX SIO Console support" |
| 1255 | depends on SERIAL_TXX9=y |
| 1256 | select SERIAL_CORE_CONSOLE |
| 1257 | |
| 1258 | config SERIAL_TXX9_STDSERIAL |
| 1259 | bool "TX39XX/49XX SIO act as standard serial" |
| 1260 | depends on !SERIAL_8250 && SERIAL_TXX9 |
| 1261 | |
| 1262 | config SERIAL_VR41XX |
| 1263 | tristate "NEC VR4100 series Serial Interface Unit support" |
| 1264 | depends on CPU_VR41XX |
| 1265 | select SERIAL_CORE |
| 1266 | help |
| 1267 | If you have a NEC VR4100 series processor and you want to use |
| 1268 | Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) |
| 1269 | (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. |
| 1270 | |
| 1271 | config SERIAL_VR41XX_CONSOLE |
| 1272 | bool "Enable NEC VR4100 series Serial Interface Unit console" |
Yoichi Yuasa | 2174041 | 2007-07-31 00:38:56 -0700 | [diff] [blame] | 1273 | depends on SERIAL_VR41XX=y |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1274 | select SERIAL_CORE_CONSOLE |
| 1275 | help |
| 1276 | If you have a NEC VR4100 series processor and you want to use |
| 1277 | a console on a serial port, say Y. Otherwise, say N. |
| 1278 | |
| 1279 | config SERIAL_JSM |
V. Ananda Krishnan | 0a577ce | 2006-02-03 03:04:30 -0800 | [diff] [blame] | 1280 | tristate "Digi International NEO PCI Support" |
| 1281 | depends on PCI |
| 1282 | select SERIAL_CORE |
| 1283 | help |
| 1284 | This is a driver for Digi International's Neo series |
| 1285 | of cards which provide multiple serial ports. You would need |
| 1286 | something like this to connect more than two modems to your Linux |
| 1287 | box, for instance in order to become a dial-in server. This driver |
| 1288 | supports PCI boards only. |
Arthur Othieno | a5f1e4e | 2006-02-15 09:52:46 +0000 | [diff] [blame] | 1289 | |
| 1290 | If you have a card like this, say Y here, otherwise say N. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1291 | |
V. Ananda Krishnan | 0a577ce | 2006-02-03 03:04:30 -0800 | [diff] [blame] | 1292 | To compile this driver as a module, choose M here: the |
| 1293 | module will be called jsm. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1294 | |
Brent Casavant | e5d310b | 2005-06-21 17:16:01 -0700 | [diff] [blame] | 1295 | config SERIAL_SGI_IOC4 |
| 1296 | tristate "SGI IOC4 controller serial support" |
| 1297 | depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 |
| 1298 | select SERIAL_CORE |
| 1299 | help |
| 1300 | If you have an SGI Altix with an IOC4 based Base IO card |
| 1301 | and wish to use the serial ports on this card, say Y. |
| 1302 | Otherwise, say N. |
| 1303 | |
Patrick Gefre | 2d0cfb5 | 2006-01-14 13:20:40 -0800 | [diff] [blame] | 1304 | config SERIAL_SGI_IOC3 |
| 1305 | tristate "SGI Altix IOC3 serial support" |
| 1306 | depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3 |
| 1307 | select SERIAL_CORE |
| 1308 | help |
| 1309 | If you have an SGI Altix with an IOC3 serial card, |
| 1310 | say Y or M. Otherwise, say N. |
| 1311 | |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 1312 | config SERIAL_MSM |
| 1313 | bool "MSM on-chip serial port support" |
| 1314 | depends on ARM && ARCH_MSM |
| 1315 | select SERIAL_CORE |
| 1316 | |
| 1317 | config SERIAL_MSM_CONSOLE |
| 1318 | bool "MSM serial console support" |
| 1319 | depends on SERIAL_MSM=y |
| 1320 | select SERIAL_CORE_CONSOLE |
| 1321 | |
Alexey Charkov | 304e126 | 2010-11-08 20:33:20 +0300 | [diff] [blame] | 1322 | config SERIAL_VT8500 |
| 1323 | bool "VIA VT8500 on-chip serial port support" |
| 1324 | depends on ARM && ARCH_VT8500 |
| 1325 | select SERIAL_CORE |
| 1326 | |
| 1327 | config SERIAL_VT8500_CONSOLE |
| 1328 | bool "VIA VT8500 serial console support" |
| 1329 | depends on SERIAL_VT8500=y |
| 1330 | select SERIAL_CORE_CONSOLE |
| 1331 | |
Sascha Hauer | f8441e1 | 2006-06-19 13:29:07 +0100 | [diff] [blame] | 1332 | config SERIAL_NETX |
Paul Bolle | fb881f7 | 2008-10-14 18:13:45 +0200 | [diff] [blame] | 1333 | tristate "NetX serial port support" |
Sascha Hauer | f8441e1 | 2006-06-19 13:29:07 +0100 | [diff] [blame] | 1334 | depends on ARM && ARCH_NETX |
| 1335 | select SERIAL_CORE |
| 1336 | help |
| 1337 | If you have a machine based on a Hilscher NetX SoC you |
| 1338 | can enable its onboard serial port by enabling this option. |
| 1339 | |
| 1340 | To compile this driver as a module, choose M here: the |
| 1341 | module will be called netx-serial. |
| 1342 | |
| 1343 | config SERIAL_NETX_CONSOLE |
| 1344 | bool "Console on NetX serial port" |
Paul Bolle | fb881f7 | 2008-10-14 18:13:45 +0200 | [diff] [blame] | 1345 | depends on SERIAL_NETX=y |
Sascha Hauer | f8441e1 | 2006-06-19 13:29:07 +0100 | [diff] [blame] | 1346 | select SERIAL_CORE_CONSOLE |
| 1347 | help |
Uwe Kleine-König | b885b27 | 2008-02-03 14:55:57 +0200 | [diff] [blame] | 1348 | If you have enabled the serial port on the Hilscher NetX SoC |
| 1349 | you can make it the console by answering Y to this option. |
Sascha Hauer | f8441e1 | 2006-06-19 13:29:07 +0100 | [diff] [blame] | 1350 | |
Arnd Bergmann | 8d38a5b | 2007-02-13 21:35:38 +0100 | [diff] [blame] | 1351 | config SERIAL_OF_PLATFORM |
| 1352 | tristate "Serial port on Open Firmware platform bus" |
Rob Herring | 236cdc7 | 2011-01-03 11:56:38 -0600 | [diff] [blame] | 1353 | depends on OF |
Benjamin Krill | 5886188d | 2009-01-07 10:32:38 +0100 | [diff] [blame] | 1354 | depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL |
Arnd Bergmann | 8d38a5b | 2007-02-13 21:35:38 +0100 | [diff] [blame] | 1355 | help |
| 1356 | If you have a PowerPC based system that has serial ports |
| 1357 | on a platform specific bus, you should enable this option. |
| 1358 | Currently, only 8250 compatible ports are supported, but |
| 1359 | others can easily be added. |
| 1360 | |
Govindraj.R | b612633 | 2010-09-27 20:20:49 +0530 | [diff] [blame] | 1361 | config SERIAL_OMAP |
| 1362 | tristate "OMAP serial port support" |
| 1363 | depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 |
| 1364 | select SERIAL_CORE |
| 1365 | help |
| 1366 | If you have a machine based on an Texas Instruments OMAP CPU you |
| 1367 | can enable its onboard serial ports by enabling this option. |
| 1368 | |
| 1369 | By enabling this option you take advantage of dma feature available |
| 1370 | with the omap-serial driver. DMA support can be enabled from platform |
| 1371 | data. |
| 1372 | |
| 1373 | config SERIAL_OMAP_CONSOLE |
| 1374 | bool "Console on OMAP serial port" |
| 1375 | depends on SERIAL_OMAP |
| 1376 | select SERIAL_CORE_CONSOLE |
| 1377 | help |
| 1378 | Select this option if you would like to use omap serial port as |
| 1379 | console. |
| 1380 | |
| 1381 | Even if you say Y here, the currently visible virtual console |
| 1382 | (/dev/tty0) will still be used as the system console by default, but |
| 1383 | you can alter that using a kernel command line option such as |
| 1384 | "console=ttyOx". (Try "man bootparam" or see the documentation of |
| 1385 | your boot loader about how to pass options to the kernel at |
| 1386 | boot time.) |
| 1387 | |
Benjamin Krill | 5886188d | 2009-01-07 10:32:38 +0100 | [diff] [blame] | 1388 | config SERIAL_OF_PLATFORM_NWPSERIAL |
| 1389 | tristate "NWP serial port driver" |
| 1390 | depends on PPC_OF && PPC_DCR |
| 1391 | select SERIAL_OF_PLATFORM |
| 1392 | select SERIAL_CORE_CONSOLE |
| 1393 | select SERIAL_CORE |
| 1394 | help |
| 1395 | This driver supports the cell network processor nwp serial |
| 1396 | device. |
| 1397 | |
| 1398 | config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE |
| 1399 | bool "Console on NWP serial port" |
| 1400 | depends on SERIAL_OF_PLATFORM_NWPSERIAL=y |
| 1401 | select SERIAL_CORE_CONSOLE |
| 1402 | help |
| 1403 | Support for Console on the NWP serial ports. |
| 1404 | |
Timur Tabi | d7584ed | 2008-01-15 09:56:13 -0600 | [diff] [blame] | 1405 | config SERIAL_QE |
| 1406 | tristate "Freescale QUICC Engine serial port support" |
| 1407 | depends on QUICC_ENGINE |
| 1408 | select SERIAL_CORE |
| 1409 | select FW_LOADER |
| 1410 | default n |
| 1411 | help |
| 1412 | This driver supports the QE serial ports on Freescale embedded |
| 1413 | PowerPC that contain a QUICC Engine. |
| 1414 | |
Thomas Bogendoerfer | eea63e0 | 2008-02-06 01:37:27 -0800 | [diff] [blame] | 1415 | config SERIAL_SC26XX |
| 1416 | tristate "SC2681/SC2692 serial port support" |
| 1417 | depends on SNI_RM |
| 1418 | select SERIAL_CORE |
| 1419 | help |
| 1420 | This is a driver for the onboard serial ports of |
| 1421 | older RM400 machines. |
| 1422 | |
| 1423 | config SERIAL_SC26XX_CONSOLE |
| 1424 | bool "Console on SC2681/SC2692 serial port" |
| 1425 | depends on SERIAL_SC26XX |
| 1426 | select SERIAL_CORE_CONSOLE |
| 1427 | help |
| 1428 | Support for Console on SC2681/SC2692 serial ports. |
| 1429 | |
Bryan Wu | 2f35174 | 2008-04-30 00:52:12 -0700 | [diff] [blame] | 1430 | config SERIAL_BFIN_SPORT |
Mike Frysinger | d671250 | 2010-03-09 12:25:39 -0500 | [diff] [blame] | 1431 | tristate "Blackfin SPORT emulate UART" |
| 1432 | depends on BLACKFIN |
Bryan Wu | 2f35174 | 2008-04-30 00:52:12 -0700 | [diff] [blame] | 1433 | select SERIAL_CORE |
| 1434 | help |
Matt LaPlante | 692105b | 2009-01-26 11:12:25 +0100 | [diff] [blame] | 1435 | Enable SPORT emulate UART on Blackfin series. |
Bryan Wu | 2f35174 | 2008-04-30 00:52:12 -0700 | [diff] [blame] | 1436 | |
| 1437 | To compile this driver as a module, choose M here: the |
| 1438 | module will be called bfin_sport_uart. |
| 1439 | |
sonic zhang | ccf68e5 | 2009-12-09 12:31:28 -0800 | [diff] [blame] | 1440 | config SERIAL_BFIN_SPORT_CONSOLE |
| 1441 | bool "Console on Blackfin sport emulated uart" |
| 1442 | depends on SERIAL_BFIN_SPORT=y |
| 1443 | select SERIAL_CORE_CONSOLE |
| 1444 | |
| 1445 | config SERIAL_BFIN_SPORT0_UART |
| 1446 | bool "Enable UART over SPORT0" |
Mike Frysinger | be99159 | 2010-03-09 12:25:40 -0500 | [diff] [blame] | 1447 | depends on SERIAL_BFIN_SPORT && !(BF542 || BF544) |
Bryan Wu | 2f35174 | 2008-04-30 00:52:12 -0700 | [diff] [blame] | 1448 | help |
sonic zhang | ccf68e5 | 2009-12-09 12:31:28 -0800 | [diff] [blame] | 1449 | Enable UART over SPORT0 |
Bryan Wu | 2f35174 | 2008-04-30 00:52:12 -0700 | [diff] [blame] | 1450 | |
Sonic Zhang | 1f7d1c8 | 2010-03-09 12:25:33 -0500 | [diff] [blame] | 1451 | config SERIAL_BFIN_SPORT0_UART_CTSRTS |
| 1452 | bool "Enable UART over SPORT0 hardware flow control" |
| 1453 | depends on SERIAL_BFIN_SPORT0_UART |
| 1454 | help |
| 1455 | Enable hardware flow control in the driver. |
| 1456 | |
sonic zhang | ccf68e5 | 2009-12-09 12:31:28 -0800 | [diff] [blame] | 1457 | config SERIAL_BFIN_SPORT1_UART |
| 1458 | bool "Enable UART over SPORT1" |
Bryan Wu | 2f35174 | 2008-04-30 00:52:12 -0700 | [diff] [blame] | 1459 | depends on SERIAL_BFIN_SPORT |
sonic zhang | ccf68e5 | 2009-12-09 12:31:28 -0800 | [diff] [blame] | 1460 | help |
| 1461 | Enable UART over SPORT1 |
| 1462 | |
Sonic Zhang | 1f7d1c8 | 2010-03-09 12:25:33 -0500 | [diff] [blame] | 1463 | config SERIAL_BFIN_SPORT1_UART_CTSRTS |
| 1464 | bool "Enable UART over SPORT1 hardware flow control" |
| 1465 | depends on SERIAL_BFIN_SPORT1_UART |
| 1466 | help |
| 1467 | Enable hardware flow control in the driver. |
| 1468 | |
sonic zhang | ccf68e5 | 2009-12-09 12:31:28 -0800 | [diff] [blame] | 1469 | config SERIAL_BFIN_SPORT2_UART |
| 1470 | bool "Enable UART over SPORT2" |
| 1471 | depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) |
| 1472 | help |
| 1473 | Enable UART over SPORT2 |
| 1474 | |
Sonic Zhang | 1f7d1c8 | 2010-03-09 12:25:33 -0500 | [diff] [blame] | 1475 | config SERIAL_BFIN_SPORT2_UART_CTSRTS |
| 1476 | bool "Enable UART over SPORT2 hardware flow control" |
| 1477 | depends on SERIAL_BFIN_SPORT2_UART |
| 1478 | help |
| 1479 | Enable hardware flow control in the driver. |
| 1480 | |
sonic zhang | ccf68e5 | 2009-12-09 12:31:28 -0800 | [diff] [blame] | 1481 | config SERIAL_BFIN_SPORT3_UART |
| 1482 | bool "Enable UART over SPORT3" |
| 1483 | depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) |
| 1484 | help |
| 1485 | Enable UART over SPORT3 |
Bryan Wu | 2f35174 | 2008-04-30 00:52:12 -0700 | [diff] [blame] | 1486 | |
Sonic Zhang | 1f7d1c8 | 2010-03-09 12:25:33 -0500 | [diff] [blame] | 1487 | config SERIAL_BFIN_SPORT3_UART_CTSRTS |
| 1488 | bool "Enable UART over SPORT3 hardware flow control" |
| 1489 | depends on SERIAL_BFIN_SPORT3_UART |
| 1490 | help |
| 1491 | Enable hardware flow control in the driver. |
| 1492 | |
Richard Röjfors | 34aec59 | 2009-06-11 14:05:39 +0100 | [diff] [blame] | 1493 | config SERIAL_TIMBERDALE |
| 1494 | tristate "Support for timberdale UART" |
Richard Röjfors | 34aec59 | 2009-06-11 14:05:39 +0100 | [diff] [blame] | 1495 | select SERIAL_CORE |
| 1496 | ---help--- |
| 1497 | Add support for UART controller on timberdale. |
| 1498 | |
Maxime Bizon | 9fcd66e | 2009-09-18 13:04:58 +0200 | [diff] [blame] | 1499 | config SERIAL_BCM63XX |
| 1500 | tristate "bcm63xx serial port support" |
| 1501 | select SERIAL_CORE |
| 1502 | depends on BCM63XX |
| 1503 | help |
| 1504 | If you have a bcm63xx CPU, you can enable its onboard |
| 1505 | serial port by enabling this options. |
| 1506 | |
| 1507 | To compile this driver as a module, choose M here: the |
| 1508 | module will be called bcm963xx_uart. |
| 1509 | |
| 1510 | config SERIAL_BCM63XX_CONSOLE |
| 1511 | bool "Console on bcm63xx serial port" |
| 1512 | depends on SERIAL_BCM63XX=y |
| 1513 | select SERIAL_CORE_CONSOLE |
| 1514 | help |
| 1515 | If you have enabled the serial port on the bcm63xx CPU |
| 1516 | you can make it the console by answering Y to this option. |
| 1517 | |
Kristoffer Glembo | d4ac42a | 2009-11-04 08:39:46 -0800 | [diff] [blame] | 1518 | config SERIAL_GRLIB_GAISLER_APBUART |
| 1519 | tristate "GRLIB APBUART serial support" |
| 1520 | depends on OF |
| 1521 | ---help--- |
| 1522 | Add support for the GRLIB APBUART serial port. |
| 1523 | |
| 1524 | config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE |
| 1525 | bool "Console on GRLIB APBUART serial port" |
| 1526 | depends on SERIAL_GRLIB_GAISLER_APBUART=y |
| 1527 | select SERIAL_CORE_CONSOLE |
| 1528 | help |
| 1529 | Support for running a console on the GRLIB APBUART |
| 1530 | |
Tobias Klauser | 5bcd601 | 2010-05-05 10:35:22 +0200 | [diff] [blame] | 1531 | config SERIAL_ALTERA_JTAGUART |
| 1532 | tristate "Altera JTAG UART support" |
| 1533 | select SERIAL_CORE |
| 1534 | help |
| 1535 | This driver supports the Altera JTAG UART port. |
| 1536 | |
| 1537 | config SERIAL_ALTERA_JTAGUART_CONSOLE |
| 1538 | bool "Altera JTAG UART console support" |
| 1539 | depends on SERIAL_ALTERA_JTAGUART=y |
| 1540 | select SERIAL_CORE_CONSOLE |
| 1541 | help |
| 1542 | Enable a Altera JTAG UART port to be the system console. |
| 1543 | |
| 1544 | config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS |
| 1545 | bool "Bypass output when no connection" |
| 1546 | depends on SERIAL_ALTERA_JTAGUART_CONSOLE |
| 1547 | select SERIAL_CORE_CONSOLE |
| 1548 | help |
| 1549 | Bypass console output and keep going even if there is no |
| 1550 | JTAG terminal connection with the host. |
| 1551 | |
Tobias Klauser | 6b7d8f8 | 2010-05-05 10:35:23 +0200 | [diff] [blame] | 1552 | config SERIAL_ALTERA_UART |
| 1553 | tristate "Altera UART support" |
| 1554 | select SERIAL_CORE |
| 1555 | help |
| 1556 | This driver supports the Altera softcore UART port. |
| 1557 | |
| 1558 | config SERIAL_ALTERA_UART_MAXPORTS |
| 1559 | int "Maximum number of Altera UART ports" |
| 1560 | depends on SERIAL_ALTERA_UART |
| 1561 | default 4 |
| 1562 | help |
| 1563 | This setting lets you define the maximum number of the Altera |
| 1564 | UART ports. The usual default varies from board to board, and |
| 1565 | this setting is a way of catering for that. |
| 1566 | |
| 1567 | config SERIAL_ALTERA_UART_BAUDRATE |
| 1568 | int "Default baudrate for Altera UART ports" |
| 1569 | depends on SERIAL_ALTERA_UART |
| 1570 | default 115200 |
| 1571 | help |
| 1572 | This setting lets you define what the default baudrate is for the |
| 1573 | Altera UART ports. The usual default varies from board to board, |
| 1574 | and this setting is a way of catering for that. |
| 1575 | |
| 1576 | config SERIAL_ALTERA_UART_CONSOLE |
| 1577 | bool "Altera UART console support" |
| 1578 | depends on SERIAL_ALTERA_UART=y |
| 1579 | select SERIAL_CORE_CONSOLE |
| 1580 | help |
| 1581 | Enable a Altera UART port to be the system console. |
| 1582 | |
Russ Gorby | af3b888 | 2010-10-26 14:13:52 +0100 | [diff] [blame] | 1583 | config SERIAL_IFX6X60 |
| 1584 | tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" |
Alan Cox | 8ddbe5e | 2010-11-11 22:28:58 +0000 | [diff] [blame] | 1585 | depends on GPIOLIB && SPI && EXPERIMENTAL |
Russ Gorby | af3b888 | 2010-10-26 14:13:52 +0100 | [diff] [blame] | 1586 | help |
| 1587 | Support for the IFX6x60 modem devices on Intel MID platforms. |
| 1588 | |
Tomoya MORINAGA | 3c6a483 | 2010-11-17 09:55:54 +0900 | [diff] [blame] | 1589 | config SERIAL_PCH_UART |
| 1590 | tristate "Intel EG20T PCH UART" |
Randy Dunlap | 5ac387d | 2010-12-02 09:19:48 -0800 | [diff] [blame] | 1591 | depends on PCI && DMADEVICES |
Tomoya MORINAGA | 3c6a483 | 2010-11-17 09:55:54 +0900 | [diff] [blame] | 1592 | select SERIAL_CORE |
Randy Dunlap | 5ac387d | 2010-12-02 09:19:48 -0800 | [diff] [blame] | 1593 | select PCH_DMA |
Tomoya MORINAGA | 3c6a483 | 2010-11-17 09:55:54 +0900 | [diff] [blame] | 1594 | help |
| 1595 | This driver is for PCH(Platform controller Hub) UART of Intel EG20T |
| 1596 | which is an IOH(Input/Output Hub) for x86 embedded processor. |
| 1597 | Enabling PCH_DMA, this PCH UART works as DMA mode. |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1598 | endmenu |