Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 1 | /* |
| 2 | * drivers/serial/msm_serial.c - driver for msm7k serial device and console |
| 3 | * |
| 4 | * Copyright (C) 2007 Google, Inc. |
| 5 | * Author: Robert Love <rlove@google.com> |
| 6 | * |
| 7 | * This software is licensed under the terms of the GNU General Public |
| 8 | * License version 2, as published by the Free Software Foundation, and |
| 9 | * may be copied, distributed, and modified under those terms. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | */ |
| 16 | |
| 17 | #if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) |
| 18 | # define SUPPORT_SYSRQ |
| 19 | #endif |
| 20 | |
| 21 | #include <linux/hrtimer.h> |
| 22 | #include <linux/module.h> |
| 23 | #include <linux/io.h> |
| 24 | #include <linux/ioport.h> |
| 25 | #include <linux/irq.h> |
| 26 | #include <linux/init.h> |
| 27 | #include <linux/console.h> |
| 28 | #include <linux/tty.h> |
| 29 | #include <linux/tty_flip.h> |
| 30 | #include <linux/serial_core.h> |
| 31 | #include <linux/serial.h> |
| 32 | #include <linux/clk.h> |
| 33 | #include <linux/platform_device.h> |
| 34 | |
| 35 | #include "msm_serial.h" |
| 36 | |
| 37 | struct msm_port { |
| 38 | struct uart_port uart; |
| 39 | char name[16]; |
| 40 | struct clk *clk; |
| 41 | unsigned int imr; |
| 42 | }; |
| 43 | |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 44 | static void msm_stop_tx(struct uart_port *port) |
| 45 | { |
| 46 | struct msm_port *msm_port = UART_TO_MSM(port); |
| 47 | |
| 48 | msm_port->imr &= ~UART_IMR_TXLEV; |
| 49 | msm_write(port, msm_port->imr, UART_IMR); |
| 50 | } |
| 51 | |
| 52 | static void msm_start_tx(struct uart_port *port) |
| 53 | { |
| 54 | struct msm_port *msm_port = UART_TO_MSM(port); |
| 55 | |
| 56 | msm_port->imr |= UART_IMR_TXLEV; |
| 57 | msm_write(port, msm_port->imr, UART_IMR); |
| 58 | } |
| 59 | |
| 60 | static void msm_stop_rx(struct uart_port *port) |
| 61 | { |
| 62 | struct msm_port *msm_port = UART_TO_MSM(port); |
| 63 | |
| 64 | msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE); |
| 65 | msm_write(port, msm_port->imr, UART_IMR); |
| 66 | } |
| 67 | |
| 68 | static void msm_enable_ms(struct uart_port *port) |
| 69 | { |
| 70 | struct msm_port *msm_port = UART_TO_MSM(port); |
| 71 | |
| 72 | msm_port->imr |= UART_IMR_DELTA_CTS; |
| 73 | msm_write(port, msm_port->imr, UART_IMR); |
| 74 | } |
| 75 | |
| 76 | static void handle_rx(struct uart_port *port) |
| 77 | { |
Alan Cox | ebd2c8f | 2009-09-19 13:13:28 -0700 | [diff] [blame] | 78 | struct tty_struct *tty = port->state->port.tty; |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 79 | unsigned int sr; |
| 80 | |
| 81 | /* |
| 82 | * Handle overrun. My understanding of the hardware is that overrun |
| 83 | * is not tied to the RX buffer, so we handle the case out of band. |
| 84 | */ |
| 85 | if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) { |
| 86 | port->icount.overrun++; |
| 87 | tty_insert_flip_char(tty, 0, TTY_OVERRUN); |
| 88 | msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); |
| 89 | } |
| 90 | |
| 91 | /* and now the main RX loop */ |
| 92 | while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) { |
| 93 | unsigned int c; |
| 94 | char flag = TTY_NORMAL; |
| 95 | |
| 96 | c = msm_read(port, UART_RF); |
| 97 | |
| 98 | if (sr & UART_SR_RX_BREAK) { |
| 99 | port->icount.brk++; |
| 100 | if (uart_handle_break(port)) |
| 101 | continue; |
| 102 | } else if (sr & UART_SR_PAR_FRAME_ERR) { |
| 103 | port->icount.frame++; |
| 104 | } else { |
| 105 | port->icount.rx++; |
| 106 | } |
| 107 | |
| 108 | /* Mask conditions we're ignorning. */ |
| 109 | sr &= port->read_status_mask; |
| 110 | |
| 111 | if (sr & UART_SR_RX_BREAK) { |
| 112 | flag = TTY_BREAK; |
| 113 | } else if (sr & UART_SR_PAR_FRAME_ERR) { |
| 114 | flag = TTY_FRAME; |
| 115 | } |
| 116 | |
| 117 | if (!uart_handle_sysrq_char(port, c)) |
| 118 | tty_insert_flip_char(tty, c, flag); |
| 119 | } |
| 120 | |
| 121 | tty_flip_buffer_push(tty); |
| 122 | } |
| 123 | |
| 124 | static void handle_tx(struct uart_port *port) |
| 125 | { |
Alan Cox | ebd2c8f | 2009-09-19 13:13:28 -0700 | [diff] [blame] | 126 | struct circ_buf *xmit = &port->state->xmit; |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 127 | struct msm_port *msm_port = UART_TO_MSM(port); |
| 128 | int sent_tx; |
| 129 | |
| 130 | if (port->x_char) { |
| 131 | msm_write(port, port->x_char, UART_TF); |
| 132 | port->icount.tx++; |
| 133 | port->x_char = 0; |
| 134 | } |
| 135 | |
| 136 | while (msm_read(port, UART_SR) & UART_SR_TX_READY) { |
| 137 | if (uart_circ_empty(xmit)) { |
| 138 | /* disable tx interrupts */ |
| 139 | msm_port->imr &= ~UART_IMR_TXLEV; |
| 140 | msm_write(port, msm_port->imr, UART_IMR); |
| 141 | break; |
| 142 | } |
| 143 | |
| 144 | msm_write(port, xmit->buf[xmit->tail], UART_TF); |
| 145 | |
| 146 | xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); |
| 147 | port->icount.tx++; |
| 148 | sent_tx = 1; |
| 149 | } |
| 150 | |
| 151 | if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
| 152 | uart_write_wakeup(port); |
| 153 | } |
| 154 | |
| 155 | static void handle_delta_cts(struct uart_port *port) |
| 156 | { |
| 157 | msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); |
| 158 | port->icount.cts++; |
Alan Cox | bdc04e3 | 2009-09-19 13:13:31 -0700 | [diff] [blame] | 159 | wake_up_interruptible(&port->state->port.delta_msr_wait); |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 160 | } |
| 161 | |
| 162 | static irqreturn_t msm_irq(int irq, void *dev_id) |
| 163 | { |
| 164 | struct uart_port *port = dev_id; |
| 165 | struct msm_port *msm_port = UART_TO_MSM(port); |
| 166 | unsigned int misr; |
| 167 | |
| 168 | spin_lock(&port->lock); |
| 169 | misr = msm_read(port, UART_MISR); |
| 170 | msm_write(port, 0, UART_IMR); /* disable interrupt */ |
| 171 | |
| 172 | if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) |
| 173 | handle_rx(port); |
| 174 | if (misr & UART_IMR_TXLEV) |
| 175 | handle_tx(port); |
| 176 | if (misr & UART_IMR_DELTA_CTS) |
| 177 | handle_delta_cts(port); |
| 178 | |
| 179 | msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */ |
| 180 | spin_unlock(&port->lock); |
| 181 | |
| 182 | return IRQ_HANDLED; |
| 183 | } |
| 184 | |
| 185 | static unsigned int msm_tx_empty(struct uart_port *port) |
| 186 | { |
| 187 | return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0; |
| 188 | } |
| 189 | |
| 190 | static unsigned int msm_get_mctrl(struct uart_port *port) |
| 191 | { |
| 192 | return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS; |
| 193 | } |
| 194 | |
| 195 | static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) |
| 196 | { |
| 197 | unsigned int mr; |
| 198 | |
| 199 | mr = msm_read(port, UART_MR1); |
| 200 | |
| 201 | if (!(mctrl & TIOCM_RTS)) { |
| 202 | mr &= ~UART_MR1_RX_RDY_CTL; |
| 203 | msm_write(port, mr, UART_MR1); |
| 204 | msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); |
| 205 | } else { |
| 206 | mr |= UART_MR1_RX_RDY_CTL; |
| 207 | msm_write(port, mr, UART_MR1); |
| 208 | } |
| 209 | } |
| 210 | |
| 211 | static void msm_break_ctl(struct uart_port *port, int break_ctl) |
| 212 | { |
| 213 | if (break_ctl) |
| 214 | msm_write(port, UART_CR_CMD_START_BREAK, UART_CR); |
| 215 | else |
| 216 | msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR); |
| 217 | } |
| 218 | |
Alan Cox | 44da59e | 2009-06-22 18:43:18 +0100 | [diff] [blame] | 219 | static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 220 | { |
| 221 | unsigned int baud_code, rxstale, watermark; |
| 222 | |
| 223 | switch (baud) { |
| 224 | case 300: |
| 225 | baud_code = UART_CSR_300; |
| 226 | rxstale = 1; |
| 227 | break; |
| 228 | case 600: |
| 229 | baud_code = UART_CSR_600; |
| 230 | rxstale = 1; |
| 231 | break; |
| 232 | case 1200: |
| 233 | baud_code = UART_CSR_1200; |
| 234 | rxstale = 1; |
| 235 | break; |
| 236 | case 2400: |
| 237 | baud_code = UART_CSR_2400; |
| 238 | rxstale = 1; |
| 239 | break; |
| 240 | case 4800: |
| 241 | baud_code = UART_CSR_4800; |
| 242 | rxstale = 1; |
| 243 | break; |
| 244 | case 9600: |
| 245 | baud_code = UART_CSR_9600; |
| 246 | rxstale = 2; |
| 247 | break; |
| 248 | case 14400: |
| 249 | baud_code = UART_CSR_14400; |
| 250 | rxstale = 3; |
| 251 | break; |
| 252 | case 19200: |
| 253 | baud_code = UART_CSR_19200; |
| 254 | rxstale = 4; |
| 255 | break; |
| 256 | case 28800: |
| 257 | baud_code = UART_CSR_28800; |
| 258 | rxstale = 6; |
| 259 | break; |
| 260 | case 38400: |
| 261 | baud_code = UART_CSR_38400; |
| 262 | rxstale = 8; |
| 263 | break; |
| 264 | case 57600: |
| 265 | baud_code = UART_CSR_57600; |
| 266 | rxstale = 16; |
| 267 | break; |
| 268 | case 115200: |
| 269 | default: |
| 270 | baud_code = UART_CSR_115200; |
Alan Cox | 44da59e | 2009-06-22 18:43:18 +0100 | [diff] [blame] | 271 | baud = 115200; |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 272 | rxstale = 31; |
| 273 | break; |
| 274 | } |
| 275 | |
| 276 | msm_write(port, baud_code, UART_CSR); |
| 277 | |
| 278 | /* RX stale watermark */ |
| 279 | watermark = UART_IPR_STALE_LSB & rxstale; |
| 280 | watermark |= UART_IPR_RXSTALE_LAST; |
| 281 | watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2); |
| 282 | msm_write(port, watermark, UART_IPR); |
| 283 | |
| 284 | /* set RX watermark */ |
| 285 | watermark = (port->fifosize * 3) / 4; |
| 286 | msm_write(port, watermark, UART_RFWR); |
| 287 | |
| 288 | /* set TX watermark */ |
| 289 | msm_write(port, 10, UART_TFWR); |
Alan Cox | 44da59e | 2009-06-22 18:43:18 +0100 | [diff] [blame] | 290 | |
| 291 | return baud; |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 292 | } |
| 293 | |
| 294 | static void msm_reset(struct uart_port *port) |
| 295 | { |
| 296 | /* reset everything */ |
| 297 | msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); |
| 298 | msm_write(port, UART_CR_CMD_RESET_TX, UART_CR); |
| 299 | msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); |
| 300 | msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); |
| 301 | msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); |
| 302 | msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); |
| 303 | } |
| 304 | |
| 305 | static void msm_init_clock(struct uart_port *port) |
| 306 | { |
| 307 | struct msm_port *msm_port = UART_TO_MSM(port); |
| 308 | |
| 309 | clk_enable(msm_port->clk); |
Abhijeet Dharmapurikar | 18c79d7 | 2010-05-20 15:20:23 -0700 | [diff] [blame] | 310 | msm_serial_set_mnd_regs(port); |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 311 | } |
| 312 | |
| 313 | static int msm_startup(struct uart_port *port) |
| 314 | { |
| 315 | struct msm_port *msm_port = UART_TO_MSM(port); |
| 316 | unsigned int data, rfr_level; |
| 317 | int ret; |
| 318 | |
| 319 | snprintf(msm_port->name, sizeof(msm_port->name), |
| 320 | "msm_serial%d", port->line); |
| 321 | |
| 322 | ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH, |
| 323 | msm_port->name, port); |
| 324 | if (unlikely(ret)) |
| 325 | return ret; |
| 326 | |
| 327 | msm_init_clock(port); |
| 328 | |
| 329 | if (likely(port->fifosize > 12)) |
| 330 | rfr_level = port->fifosize - 12; |
| 331 | else |
| 332 | rfr_level = port->fifosize; |
| 333 | |
| 334 | /* set automatic RFR level */ |
| 335 | data = msm_read(port, UART_MR1); |
| 336 | data &= ~UART_MR1_AUTO_RFR_LEVEL1; |
| 337 | data &= ~UART_MR1_AUTO_RFR_LEVEL0; |
| 338 | data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2); |
| 339 | data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level; |
| 340 | msm_write(port, data, UART_MR1); |
| 341 | |
| 342 | /* make sure that RXSTALE count is non-zero */ |
| 343 | data = msm_read(port, UART_IPR); |
| 344 | if (unlikely(!data)) { |
| 345 | data |= UART_IPR_RXSTALE_LAST; |
| 346 | data |= UART_IPR_STALE_LSB; |
| 347 | msm_write(port, data, UART_IPR); |
| 348 | } |
| 349 | |
| 350 | msm_reset(port); |
| 351 | |
| 352 | msm_write(port, 0x05, UART_CR); /* enable TX & RX */ |
| 353 | |
| 354 | /* turn on RX and CTS interrupts */ |
| 355 | msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE | |
| 356 | UART_IMR_CURRENT_CTS; |
| 357 | msm_write(port, msm_port->imr, UART_IMR); |
| 358 | |
| 359 | return 0; |
| 360 | } |
| 361 | |
| 362 | static void msm_shutdown(struct uart_port *port) |
| 363 | { |
| 364 | struct msm_port *msm_port = UART_TO_MSM(port); |
| 365 | |
| 366 | msm_port->imr = 0; |
| 367 | msm_write(port, 0, UART_IMR); /* disable interrupts */ |
| 368 | |
| 369 | clk_disable(msm_port->clk); |
| 370 | |
| 371 | free_irq(port->irq, port); |
| 372 | } |
| 373 | |
| 374 | static void msm_set_termios(struct uart_port *port, struct ktermios *termios, |
| 375 | struct ktermios *old) |
| 376 | { |
| 377 | unsigned long flags; |
| 378 | unsigned int baud, mr; |
| 379 | |
| 380 | spin_lock_irqsave(&port->lock, flags); |
| 381 | |
| 382 | /* calculate and set baud rate */ |
| 383 | baud = uart_get_baud_rate(port, termios, old, 300, 115200); |
Alan Cox | 44da59e | 2009-06-22 18:43:18 +0100 | [diff] [blame] | 384 | baud = msm_set_baud_rate(port, baud); |
| 385 | if (tty_termios_baud_rate(termios)) |
| 386 | tty_termios_encode_baud_rate(termios, baud, baud); |
| 387 | |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 388 | /* calculate parity */ |
| 389 | mr = msm_read(port, UART_MR2); |
| 390 | mr &= ~UART_MR2_PARITY_MODE; |
| 391 | if (termios->c_cflag & PARENB) { |
| 392 | if (termios->c_cflag & PARODD) |
| 393 | mr |= UART_MR2_PARITY_MODE_ODD; |
| 394 | else if (termios->c_cflag & CMSPAR) |
| 395 | mr |= UART_MR2_PARITY_MODE_SPACE; |
| 396 | else |
| 397 | mr |= UART_MR2_PARITY_MODE_EVEN; |
| 398 | } |
| 399 | |
| 400 | /* calculate bits per char */ |
| 401 | mr &= ~UART_MR2_BITS_PER_CHAR; |
| 402 | switch (termios->c_cflag & CSIZE) { |
| 403 | case CS5: |
| 404 | mr |= UART_MR2_BITS_PER_CHAR_5; |
| 405 | break; |
| 406 | case CS6: |
| 407 | mr |= UART_MR2_BITS_PER_CHAR_6; |
| 408 | break; |
| 409 | case CS7: |
| 410 | mr |= UART_MR2_BITS_PER_CHAR_7; |
| 411 | break; |
| 412 | case CS8: |
| 413 | default: |
| 414 | mr |= UART_MR2_BITS_PER_CHAR_8; |
| 415 | break; |
| 416 | } |
| 417 | |
| 418 | /* calculate stop bits */ |
| 419 | mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO); |
| 420 | if (termios->c_cflag & CSTOPB) |
| 421 | mr |= UART_MR2_STOP_BIT_LEN_TWO; |
| 422 | else |
| 423 | mr |= UART_MR2_STOP_BIT_LEN_ONE; |
| 424 | |
| 425 | /* set parity, bits per char, and stop bit */ |
| 426 | msm_write(port, mr, UART_MR2); |
| 427 | |
| 428 | /* calculate and set hardware flow control */ |
| 429 | mr = msm_read(port, UART_MR1); |
| 430 | mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL); |
| 431 | if (termios->c_cflag & CRTSCTS) { |
| 432 | mr |= UART_MR1_CTS_CTL; |
| 433 | mr |= UART_MR1_RX_RDY_CTL; |
| 434 | } |
| 435 | msm_write(port, mr, UART_MR1); |
| 436 | |
| 437 | /* Configure status bits to ignore based on termio flags. */ |
| 438 | port->read_status_mask = 0; |
| 439 | if (termios->c_iflag & INPCK) |
| 440 | port->read_status_mask |= UART_SR_PAR_FRAME_ERR; |
| 441 | if (termios->c_iflag & (BRKINT | PARMRK)) |
| 442 | port->read_status_mask |= UART_SR_RX_BREAK; |
| 443 | |
| 444 | uart_update_timeout(port, termios->c_cflag, baud); |
| 445 | |
| 446 | spin_unlock_irqrestore(&port->lock, flags); |
| 447 | } |
| 448 | |
| 449 | static const char *msm_type(struct uart_port *port) |
| 450 | { |
| 451 | return "MSM"; |
| 452 | } |
| 453 | |
| 454 | static void msm_release_port(struct uart_port *port) |
| 455 | { |
| 456 | struct platform_device *pdev = to_platform_device(port->dev); |
| 457 | struct resource *resource; |
| 458 | resource_size_t size; |
| 459 | |
| 460 | resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 461 | if (unlikely(!resource)) |
| 462 | return; |
| 463 | size = resource->end - resource->start + 1; |
| 464 | |
| 465 | release_mem_region(port->mapbase, size); |
| 466 | iounmap(port->membase); |
| 467 | port->membase = NULL; |
| 468 | } |
| 469 | |
| 470 | static int msm_request_port(struct uart_port *port) |
| 471 | { |
| 472 | struct platform_device *pdev = to_platform_device(port->dev); |
| 473 | struct resource *resource; |
| 474 | resource_size_t size; |
| 475 | |
| 476 | resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 477 | if (unlikely(!resource)) |
| 478 | return -ENXIO; |
| 479 | size = resource->end - resource->start + 1; |
| 480 | |
| 481 | if (unlikely(!request_mem_region(port->mapbase, size, "msm_serial"))) |
| 482 | return -EBUSY; |
| 483 | |
| 484 | port->membase = ioremap(port->mapbase, size); |
| 485 | if (!port->membase) { |
| 486 | release_mem_region(port->mapbase, size); |
| 487 | return -EBUSY; |
| 488 | } |
| 489 | |
| 490 | return 0; |
| 491 | } |
| 492 | |
| 493 | static void msm_config_port(struct uart_port *port, int flags) |
| 494 | { |
| 495 | if (flags & UART_CONFIG_TYPE) { |
| 496 | port->type = PORT_MSM; |
| 497 | msm_request_port(port); |
| 498 | } |
| 499 | } |
| 500 | |
| 501 | static int msm_verify_port(struct uart_port *port, struct serial_struct *ser) |
| 502 | { |
| 503 | if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM)) |
| 504 | return -EINVAL; |
| 505 | if (unlikely(port->irq != ser->irq)) |
| 506 | return -EINVAL; |
| 507 | return 0; |
| 508 | } |
| 509 | |
| 510 | static void msm_power(struct uart_port *port, unsigned int state, |
| 511 | unsigned int oldstate) |
| 512 | { |
| 513 | struct msm_port *msm_port = UART_TO_MSM(port); |
| 514 | |
| 515 | switch (state) { |
| 516 | case 0: |
| 517 | clk_enable(msm_port->clk); |
| 518 | break; |
| 519 | case 3: |
| 520 | clk_disable(msm_port->clk); |
| 521 | break; |
| 522 | default: |
| 523 | printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state); |
| 524 | } |
| 525 | } |
| 526 | |
| 527 | static struct uart_ops msm_uart_pops = { |
| 528 | .tx_empty = msm_tx_empty, |
| 529 | .set_mctrl = msm_set_mctrl, |
| 530 | .get_mctrl = msm_get_mctrl, |
| 531 | .stop_tx = msm_stop_tx, |
| 532 | .start_tx = msm_start_tx, |
| 533 | .stop_rx = msm_stop_rx, |
| 534 | .enable_ms = msm_enable_ms, |
| 535 | .break_ctl = msm_break_ctl, |
| 536 | .startup = msm_startup, |
| 537 | .shutdown = msm_shutdown, |
| 538 | .set_termios = msm_set_termios, |
| 539 | .type = msm_type, |
| 540 | .release_port = msm_release_port, |
| 541 | .request_port = msm_request_port, |
| 542 | .config_port = msm_config_port, |
| 543 | .verify_port = msm_verify_port, |
| 544 | .pm = msm_power, |
| 545 | }; |
| 546 | |
| 547 | static struct msm_port msm_uart_ports[] = { |
| 548 | { |
| 549 | .uart = { |
| 550 | .iotype = UPIO_MEM, |
| 551 | .ops = &msm_uart_pops, |
| 552 | .flags = UPF_BOOT_AUTOCONF, |
| 553 | .fifosize = 512, |
| 554 | .line = 0, |
| 555 | }, |
| 556 | }, |
| 557 | { |
| 558 | .uart = { |
| 559 | .iotype = UPIO_MEM, |
| 560 | .ops = &msm_uart_pops, |
| 561 | .flags = UPF_BOOT_AUTOCONF, |
| 562 | .fifosize = 512, |
| 563 | .line = 1, |
| 564 | }, |
| 565 | }, |
| 566 | { |
| 567 | .uart = { |
| 568 | .iotype = UPIO_MEM, |
| 569 | .ops = &msm_uart_pops, |
| 570 | .flags = UPF_BOOT_AUTOCONF, |
| 571 | .fifosize = 64, |
| 572 | .line = 2, |
| 573 | }, |
| 574 | }, |
| 575 | }; |
| 576 | |
| 577 | #define UART_NR ARRAY_SIZE(msm_uart_ports) |
| 578 | |
| 579 | static inline struct uart_port *get_port_from_line(unsigned int line) |
| 580 | { |
| 581 | return &msm_uart_ports[line].uart; |
| 582 | } |
| 583 | |
| 584 | #ifdef CONFIG_SERIAL_MSM_CONSOLE |
| 585 | |
| 586 | static void msm_console_putchar(struct uart_port *port, int c) |
| 587 | { |
| 588 | while (!(msm_read(port, UART_SR) & UART_SR_TX_READY)) |
| 589 | ; |
| 590 | msm_write(port, c, UART_TF); |
| 591 | } |
| 592 | |
| 593 | static void msm_console_write(struct console *co, const char *s, |
| 594 | unsigned int count) |
| 595 | { |
| 596 | struct uart_port *port; |
| 597 | struct msm_port *msm_port; |
| 598 | |
| 599 | BUG_ON(co->index < 0 || co->index >= UART_NR); |
| 600 | |
| 601 | port = get_port_from_line(co->index); |
| 602 | msm_port = UART_TO_MSM(port); |
| 603 | |
| 604 | spin_lock(&port->lock); |
| 605 | uart_console_write(port, s, count, msm_console_putchar); |
| 606 | spin_unlock(&port->lock); |
| 607 | } |
| 608 | |
| 609 | static int __init msm_console_setup(struct console *co, char *options) |
| 610 | { |
| 611 | struct uart_port *port; |
| 612 | int baud, flow, bits, parity; |
| 613 | |
| 614 | if (unlikely(co->index >= UART_NR || co->index < 0)) |
| 615 | return -ENXIO; |
| 616 | |
| 617 | port = get_port_from_line(co->index); |
| 618 | |
| 619 | if (unlikely(!port->membase)) |
| 620 | return -ENXIO; |
| 621 | |
| 622 | port->cons = co; |
| 623 | |
| 624 | msm_init_clock(port); |
| 625 | |
| 626 | if (options) |
| 627 | uart_parse_options(options, &baud, &parity, &bits, &flow); |
| 628 | |
| 629 | bits = 8; |
| 630 | parity = 'n'; |
| 631 | flow = 'n'; |
| 632 | msm_write(port, UART_MR2_BITS_PER_CHAR_8 | UART_MR2_STOP_BIT_LEN_ONE, |
| 633 | UART_MR2); /* 8N1 */ |
| 634 | |
| 635 | if (baud < 300 || baud > 115200) |
| 636 | baud = 115200; |
| 637 | msm_set_baud_rate(port, baud); |
| 638 | |
| 639 | msm_reset(port); |
| 640 | |
| 641 | printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line); |
| 642 | |
| 643 | return uart_set_options(port, co, baud, parity, bits, flow); |
| 644 | } |
| 645 | |
| 646 | static struct uart_driver msm_uart_driver; |
| 647 | |
| 648 | static struct console msm_console = { |
| 649 | .name = "ttyMSM", |
| 650 | .write = msm_console_write, |
| 651 | .device = uart_console_device, |
| 652 | .setup = msm_console_setup, |
| 653 | .flags = CON_PRINTBUFFER, |
| 654 | .index = -1, |
| 655 | .data = &msm_uart_driver, |
| 656 | }; |
| 657 | |
| 658 | #define MSM_CONSOLE (&msm_console) |
| 659 | |
| 660 | #else |
| 661 | #define MSM_CONSOLE NULL |
| 662 | #endif |
| 663 | |
| 664 | static struct uart_driver msm_uart_driver = { |
| 665 | .owner = THIS_MODULE, |
| 666 | .driver_name = "msm_serial", |
| 667 | .dev_name = "ttyMSM", |
| 668 | .nr = UART_NR, |
| 669 | .cons = MSM_CONSOLE, |
| 670 | }; |
| 671 | |
| 672 | static int __init msm_serial_probe(struct platform_device *pdev) |
| 673 | { |
| 674 | struct msm_port *msm_port; |
| 675 | struct resource *resource; |
| 676 | struct uart_port *port; |
Roel Kluin | 1e09175 | 2009-12-21 16:26:49 -0800 | [diff] [blame] | 677 | int irq; |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 678 | |
| 679 | if (unlikely(pdev->id < 0 || pdev->id >= UART_NR)) |
| 680 | return -ENXIO; |
| 681 | |
| 682 | printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id); |
| 683 | |
| 684 | port = get_port_from_line(pdev->id); |
| 685 | port->dev = &pdev->dev; |
| 686 | msm_port = UART_TO_MSM(port); |
| 687 | |
| 688 | msm_port->clk = clk_get(&pdev->dev, "uart_clk"); |
Tobias Klauser | dc6bbc9 | 2010-12-09 15:51:32 +0100 | [diff] [blame] | 689 | if (IS_ERR(msm_port->clk)) |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 690 | return PTR_ERR(msm_port->clk); |
| 691 | port->uartclk = clk_get_rate(msm_port->clk); |
Abhijeet Dharmapurikar | 18c79d7 | 2010-05-20 15:20:23 -0700 | [diff] [blame] | 692 | printk(KERN_INFO "uartclk = %d\n", port->uartclk); |
| 693 | |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 694 | |
| 695 | resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 696 | if (unlikely(!resource)) |
| 697 | return -ENXIO; |
| 698 | port->mapbase = resource->start; |
| 699 | |
Roel Kluin | 1e09175 | 2009-12-21 16:26:49 -0800 | [diff] [blame] | 700 | irq = platform_get_irq(pdev, 0); |
| 701 | if (unlikely(irq < 0)) |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 702 | return -ENXIO; |
Roel Kluin | 1e09175 | 2009-12-21 16:26:49 -0800 | [diff] [blame] | 703 | port->irq = irq; |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 704 | |
| 705 | platform_set_drvdata(pdev, port); |
| 706 | |
| 707 | return uart_add_one_port(&msm_uart_driver, port); |
| 708 | } |
| 709 | |
| 710 | static int __devexit msm_serial_remove(struct platform_device *pdev) |
| 711 | { |
| 712 | struct msm_port *msm_port = platform_get_drvdata(pdev); |
| 713 | |
| 714 | clk_put(msm_port->clk); |
| 715 | |
| 716 | return 0; |
| 717 | } |
| 718 | |
| 719 | static struct platform_driver msm_platform_driver = { |
Robert Love | 04896a7 | 2009-06-22 18:43:11 +0100 | [diff] [blame] | 720 | .remove = msm_serial_remove, |
| 721 | .driver = { |
| 722 | .name = "msm_serial", |
| 723 | .owner = THIS_MODULE, |
| 724 | }, |
| 725 | }; |
| 726 | |
| 727 | static int __init msm_serial_init(void) |
| 728 | { |
| 729 | int ret; |
| 730 | |
| 731 | ret = uart_register_driver(&msm_uart_driver); |
| 732 | if (unlikely(ret)) |
| 733 | return ret; |
| 734 | |
| 735 | ret = platform_driver_probe(&msm_platform_driver, msm_serial_probe); |
| 736 | if (unlikely(ret)) |
| 737 | uart_unregister_driver(&msm_uart_driver); |
| 738 | |
| 739 | printk(KERN_INFO "msm_serial: driver initialized\n"); |
| 740 | |
| 741 | return ret; |
| 742 | } |
| 743 | |
| 744 | static void __exit msm_serial_exit(void) |
| 745 | { |
| 746 | #ifdef CONFIG_SERIAL_MSM_CONSOLE |
| 747 | unregister_console(&msm_console); |
| 748 | #endif |
| 749 | platform_driver_unregister(&msm_platform_driver); |
| 750 | uart_unregister_driver(&msm_uart_driver); |
| 751 | } |
| 752 | |
| 753 | module_init(msm_serial_init); |
| 754 | module_exit(msm_serial_exit); |
| 755 | |
| 756 | MODULE_AUTHOR("Robert Love <rlove@google.com>"); |
| 757 | MODULE_DESCRIPTION("Driver for msm7x serial device"); |
| 758 | MODULE_LICENSE("GPL"); |