blob: 7438f8d775ba7fa09fb32f9ad2f0a8934606afb5 [file] [log] [blame]
Kuninori Morimoto858424b2009-12-11 11:53:55 -03001/*
2 * mt9t112 Camera Driver
3 *
4 * Copyright (C) 2009 Renesas Solutions Corp.
5 * Kuninori Morimoto <morimoto.kuninori@renesas.com>
6 *
7 * Based on ov772x driver, mt9m111 driver,
8 *
9 * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
10 * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr>
11 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
12 * Copyright (C) 2008 Magnus Damm
13 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License version 2 as
17 * published by the Free Software Foundation.
18 */
19
20#include <linux/delay.h>
21#include <linux/i2c.h>
22#include <linux/init.h>
23#include <linux/module.h>
24#include <linux/slab.h>
25#include <linux/videodev2.h>
26
27#include <media/mt9t112.h>
28#include <media/soc_camera.h>
29#include <media/soc_mediabus.h>
30#include <media/v4l2-chip-ident.h>
31#include <media/v4l2-common.h>
32
33/* you can check PLL/clock info */
34/* #define EXT_CLOCK 24000000 */
35
36/************************************************************************
37
38
39 macro
40
41
42************************************************************************/
43/*
44 * frame size
45 */
46#define MAX_WIDTH 2048
47#define MAX_HEIGHT 1536
48
49#define VGA_WIDTH 640
50#define VGA_HEIGHT 480
51
52/*
53 * macro of read/write
54 */
55#define ECHECKER(ret, x) \
56 do { \
57 (ret) = (x); \
58 if ((ret) < 0) \
59 return (ret); \
60 } while (0)
61
62#define mt9t112_reg_write(ret, client, a, b) \
63 ECHECKER(ret, __mt9t112_reg_write(client, a, b))
64#define mt9t112_mcu_write(ret, client, a, b) \
65 ECHECKER(ret, __mt9t112_mcu_write(client, a, b))
66
67#define mt9t112_reg_mask_set(ret, client, a, b, c) \
68 ECHECKER(ret, __mt9t112_reg_mask_set(client, a, b, c))
69#define mt9t112_mcu_mask_set(ret, client, a, b, c) \
70 ECHECKER(ret, __mt9t112_mcu_mask_set(client, a, b, c))
71
72#define mt9t112_reg_read(ret, client, a) \
73 ECHECKER(ret, __mt9t112_reg_read(client, a))
74
75/*
76 * Logical address
77 */
78#define _VAR(id, offset, base) (base | (id & 0x1f) << 10 | (offset & 0x3ff))
79#define VAR(id, offset) _VAR(id, offset, 0x0000)
80#define VAR8(id, offset) _VAR(id, offset, 0x8000)
81
82/************************************************************************
83
84
85 struct
86
87
88************************************************************************/
89struct mt9t112_frame_size {
90 u16 width;
91 u16 height;
92};
93
94struct mt9t112_format {
95 enum v4l2_mbus_pixelcode code;
96 enum v4l2_colorspace colorspace;
97 u16 fmt;
98 u16 order;
99};
100
101struct mt9t112_priv {
102 struct v4l2_subdev subdev;
103 struct mt9t112_camera_info *info;
104 struct i2c_client *client;
105 struct soc_camera_device icd;
106 struct mt9t112_frame_size frame;
107 const struct mt9t112_format *format;
108 int model;
109 u32 flags;
110/* for flags */
111#define INIT_DONE (1<<0)
112};
113
114/************************************************************************
115
116
117 supported format
118
119
120************************************************************************/
121
122static const struct mt9t112_format mt9t112_cfmts[] = {
123 {
124 .code = V4L2_MBUS_FMT_YUYV8_2X8_BE,
125 .colorspace = V4L2_COLORSPACE_JPEG,
126 .fmt = 1,
127 .order = 0,
128 }, {
129 .code = V4L2_MBUS_FMT_YVYU8_2X8_BE,
130 .colorspace = V4L2_COLORSPACE_JPEG,
131 .fmt = 1,
132 .order = 1,
133 }, {
134 .code = V4L2_MBUS_FMT_YUYV8_2X8_LE,
135 .colorspace = V4L2_COLORSPACE_JPEG,
136 .fmt = 1,
137 .order = 2,
138 }, {
139 .code = V4L2_MBUS_FMT_YVYU8_2X8_LE,
140 .colorspace = V4L2_COLORSPACE_JPEG,
141 .fmt = 1,
142 .order = 3,
143 }, {
144 .code = V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE,
145 .colorspace = V4L2_COLORSPACE_SRGB,
146 .fmt = 8,
147 .order = 2,
148 }, {
149 .code = V4L2_MBUS_FMT_RGB565_2X8_LE,
150 .colorspace = V4L2_COLORSPACE_SRGB,
151 .fmt = 4,
152 .order = 2,
153 },
154};
155
156/************************************************************************
157
158
159 general function
160
161
162************************************************************************/
163static struct mt9t112_priv *to_mt9t112(const struct i2c_client *client)
164{
165 return container_of(i2c_get_clientdata(client),
166 struct mt9t112_priv,
167 subdev);
168}
169
170static int __mt9t112_reg_read(const struct i2c_client *client, u16 command)
171{
172 struct i2c_msg msg[2];
173 u8 buf[2];
174 int ret;
175
176 command = swab16(command);
177
178 msg[0].addr = client->addr;
179 msg[0].flags = 0;
180 msg[0].len = 2;
181 msg[0].buf = (u8 *)&command;
182
183 msg[1].addr = client->addr;
184 msg[1].flags = I2C_M_RD;
185 msg[1].len = 2;
186 msg[1].buf = buf;
187
188 /*
189 * if return value of this function is < 0,
190 * it mean error.
191 * else, under 16bit is valid data.
192 */
193 ret = i2c_transfer(client->adapter, msg, 2);
194 if (ret < 0)
195 return ret;
196
197 memcpy(&ret, buf, 2);
198 return swab16(ret);
199}
200
201static int __mt9t112_reg_write(const struct i2c_client *client,
202 u16 command, u16 data)
203{
204 struct i2c_msg msg;
205 u8 buf[4];
206 int ret;
207
208 command = swab16(command);
209 data = swab16(data);
210
211 memcpy(buf + 0, &command, 2);
212 memcpy(buf + 2, &data, 2);
213
214 msg.addr = client->addr;
215 msg.flags = 0;
216 msg.len = 4;
217 msg.buf = buf;
218
219 /*
220 * i2c_transfer return message length,
221 * but this function should return 0 if correct case
222 */
223 ret = i2c_transfer(client->adapter, &msg, 1);
224 if (ret >= 0)
225 ret = 0;
226
227 return ret;
228}
229
230static int __mt9t112_reg_mask_set(const struct i2c_client *client,
231 u16 command,
232 u16 mask,
233 u16 set)
234{
235 int val = __mt9t112_reg_read(client, command);
236 if (val < 0)
237 return val;
238
239 val &= ~mask;
240 val |= set & mask;
241
242 return __mt9t112_reg_write(client, command, val);
243}
244
245/* mcu access */
246static int __mt9t112_mcu_read(const struct i2c_client *client, u16 command)
247{
248 int ret;
249
250 ret = __mt9t112_reg_write(client, 0x098E, command);
251 if (ret < 0)
252 return ret;
253
254 return __mt9t112_reg_read(client, 0x0990);
255}
256
257static int __mt9t112_mcu_write(const struct i2c_client *client,
258 u16 command, u16 data)
259{
260 int ret;
261
262 ret = __mt9t112_reg_write(client, 0x098E, command);
263 if (ret < 0)
264 return ret;
265
266 return __mt9t112_reg_write(client, 0x0990, data);
267}
268
269static int __mt9t112_mcu_mask_set(const struct i2c_client *client,
270 u16 command,
271 u16 mask,
272 u16 set)
273{
274 int val = __mt9t112_mcu_read(client, command);
275 if (val < 0)
276 return val;
277
278 val &= ~mask;
279 val |= set & mask;
280
281 return __mt9t112_mcu_write(client, command, val);
282}
283
284static int mt9t112_reset(const struct i2c_client *client)
285{
286 int ret;
287
288 mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0001);
289 msleep(1);
290 mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0000);
291
292 return ret;
293}
294
295#ifndef EXT_CLOCK
296#define CLOCK_INFO(a, b)
297#else
298#define CLOCK_INFO(a, b) mt9t112_clock_info(a, b)
299static int mt9t112_clock_info(const struct i2c_client *client, u32 ext)
300{
301 int m, n, p1, p2, p3, p4, p5, p6, p7;
302 u32 vco, clk;
303 char *enable;
304
305 ext /= 1000; /* kbyte order */
306
307 mt9t112_reg_read(n, client, 0x0012);
308 p1 = n & 0x000f;
309 n = n >> 4;
310 p2 = n & 0x000f;
311 n = n >> 4;
312 p3 = n & 0x000f;
313
314 mt9t112_reg_read(n, client, 0x002a);
315 p4 = n & 0x000f;
316 n = n >> 4;
317 p5 = n & 0x000f;
318 n = n >> 4;
319 p6 = n & 0x000f;
320
321 mt9t112_reg_read(n, client, 0x002c);
322 p7 = n & 0x000f;
323
324 mt9t112_reg_read(n, client, 0x0010);
325 m = n & 0x00ff;
326 n = (n >> 8) & 0x003f;
327
328 enable = ((6000 > ext) || (54000 < ext)) ? "X" : "";
329 dev_info(&client->dev, "EXTCLK : %10u K %s\n", ext, enable);
330
331 vco = 2 * m * ext / (n+1);
332 enable = ((384000 > vco) || (768000 < vco)) ? "X" : "";
333 dev_info(&client->dev, "VCO : %10u K %s\n", vco, enable);
334
335 clk = vco / (p1+1) / (p2+1);
336 enable = (96000 < clk) ? "X" : "";
337 dev_info(&client->dev, "PIXCLK : %10u K %s\n", clk, enable);
338
339 clk = vco / (p3+1);
340 enable = (768000 < clk) ? "X" : "";
341 dev_info(&client->dev, "MIPICLK : %10u K %s\n", clk, enable);
342
343 clk = vco / (p6+1);
344 enable = (96000 < clk) ? "X" : "";
345 dev_info(&client->dev, "MCU CLK : %10u K %s\n", clk, enable);
346
347 clk = vco / (p5+1);
348 enable = (54000 < clk) ? "X" : "";
349 dev_info(&client->dev, "SOC CLK : %10u K %s\n", clk, enable);
350
351 clk = vco / (p4+1);
352 enable = (70000 < clk) ? "X" : "";
353 dev_info(&client->dev, "Sensor CLK : %10u K %s\n", clk, enable);
354
355 clk = vco / (p7+1);
356 dev_info(&client->dev, "External sensor : %10u K\n", clk);
357
358 clk = ext / (n+1);
359 enable = ((2000 > clk) || (24000 < clk)) ? "X" : "";
360 dev_info(&client->dev, "PFD : %10u K %s\n", clk, enable);
361
362 return 0;
363}
364#endif
365
366static void mt9t112_frame_check(u32 *width, u32 *height)
367{
368 if (*width > MAX_WIDTH)
369 *width = MAX_WIDTH;
370
371 if (*height > MAX_HEIGHT)
372 *height = MAX_HEIGHT;
373}
374
375static int mt9t112_set_a_frame_size(const struct i2c_client *client,
376 u16 width,
377 u16 height)
378{
379 int ret;
380 u16 wstart = (MAX_WIDTH - width) / 2;
381 u16 hstart = (MAX_HEIGHT - height) / 2;
382
383 /* (Context A) Image Width/Height */
384 mt9t112_mcu_write(ret, client, VAR(26, 0), width);
385 mt9t112_mcu_write(ret, client, VAR(26, 2), height);
386
387 /* (Context A) Output Width/Height */
388 mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + width);
389 mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + height);
390
391 /* (Context A) Start Row/Column */
392 mt9t112_mcu_write(ret, client, VAR(18, 2), 4 + hstart);
393 mt9t112_mcu_write(ret, client, VAR(18, 4), 4 + wstart);
394
395 /* (Context A) End Row/Column */
396 mt9t112_mcu_write(ret, client, VAR(18, 6), 11 + height + hstart);
397 mt9t112_mcu_write(ret, client, VAR(18, 8), 11 + width + wstart);
398
399 mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
400
401 return ret;
402}
403
404static int mt9t112_set_pll_dividers(const struct i2c_client *client,
405 u8 m, u8 n,
406 u8 p1, u8 p2, u8 p3,
407 u8 p4, u8 p5, u8 p6,
408 u8 p7)
409{
410 int ret;
411 u16 val;
412
413 /* N/M */
414 val = (n << 8) |
415 (m << 0);
416 mt9t112_reg_mask_set(ret, client, 0x0010, 0x3fff, val);
417
418 /* P1/P2/P3 */
419 val = ((p3 & 0x0F) << 8) |
420 ((p2 & 0x0F) << 4) |
421 ((p1 & 0x0F) << 0);
422 mt9t112_reg_mask_set(ret, client, 0x0012, 0x0fff, val);
423
424 /* P4/P5/P6 */
425 val = (0x7 << 12) |
426 ((p6 & 0x0F) << 8) |
427 ((p5 & 0x0F) << 4) |
428 ((p4 & 0x0F) << 0);
429 mt9t112_reg_mask_set(ret, client, 0x002A, 0x7fff, val);
430
431 /* P7 */
432 val = (0x1 << 12) |
433 ((p7 & 0x0F) << 0);
434 mt9t112_reg_mask_set(ret, client, 0x002C, 0x100f, val);
435
436 return ret;
437}
438
439static int mt9t112_init_pll(const struct i2c_client *client)
440{
441 struct mt9t112_priv *priv = to_mt9t112(client);
442 int data, i, ret;
443
444 mt9t112_reg_mask_set(ret, client, 0x0014, 0x003, 0x0001);
445
446 /* PLL control: BYPASS PLL = 8517 */
447 mt9t112_reg_write(ret, client, 0x0014, 0x2145);
448
449 /* Replace these registers when new timing parameters are generated */
450 mt9t112_set_pll_dividers(client,
451 priv->info->divider.m,
452 priv->info->divider.n,
453 priv->info->divider.p1,
454 priv->info->divider.p2,
455 priv->info->divider.p3,
456 priv->info->divider.p4,
457 priv->info->divider.p5,
458 priv->info->divider.p6,
459 priv->info->divider.p7);
460
461 /*
462 * TEST_BYPASS on
463 * PLL_ENABLE on
464 * SEL_LOCK_DET on
465 * TEST_BYPASS off
466 */
467 mt9t112_reg_write(ret, client, 0x0014, 0x2525);
468 mt9t112_reg_write(ret, client, 0x0014, 0x2527);
469 mt9t112_reg_write(ret, client, 0x0014, 0x3427);
470 mt9t112_reg_write(ret, client, 0x0014, 0x3027);
471
472 mdelay(10);
473
474 /*
475 * PLL_BYPASS off
476 * Reference clock count
477 * I2C Master Clock Divider
478 */
479 mt9t112_reg_write(ret, client, 0x0014, 0x3046);
480 mt9t112_reg_write(ret, client, 0x0022, 0x0190);
481 mt9t112_reg_write(ret, client, 0x3B84, 0x0212);
482
483 /* External sensor clock is PLL bypass */
484 mt9t112_reg_write(ret, client, 0x002E, 0x0500);
485
486 mt9t112_reg_mask_set(ret, client, 0x0018, 0x0002, 0x0002);
487 mt9t112_reg_mask_set(ret, client, 0x3B82, 0x0004, 0x0004);
488
489 /* MCU disabled */
490 mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0x0004);
491
492 /* out of standby */
493 mt9t112_reg_mask_set(ret, client, 0x0018, 0x0001, 0);
494
495 mdelay(50);
496
497 /*
498 * Standby Workaround
499 * Disable Secondary I2C Pads
500 */
501 mt9t112_reg_write(ret, client, 0x0614, 0x0001);
502 mdelay(1);
503 mt9t112_reg_write(ret, client, 0x0614, 0x0001);
504 mdelay(1);
505 mt9t112_reg_write(ret, client, 0x0614, 0x0001);
506 mdelay(1);
507 mt9t112_reg_write(ret, client, 0x0614, 0x0001);
508 mdelay(1);
509 mt9t112_reg_write(ret, client, 0x0614, 0x0001);
510 mdelay(1);
511 mt9t112_reg_write(ret, client, 0x0614, 0x0001);
512 mdelay(1);
513
514 /* poll to verify out of standby. Must Poll this bit */
515 for (i = 0; i < 100; i++) {
516 mt9t112_reg_read(data, client, 0x0018);
Kuninori Morimoto2b59125b2010-02-02 13:17:54 +0900517 if (!(0x4000 & data))
Kuninori Morimoto858424b2009-12-11 11:53:55 -0300518 break;
519
520 mdelay(10);
521 }
522
523 return ret;
524}
525
526static int mt9t112_init_setting(const struct i2c_client *client)
527{
528
529 int ret;
530
531 /* Adaptive Output Clock (A) */
532 mt9t112_mcu_mask_set(ret, client, VAR(26, 160), 0x0040, 0x0000);
533
534 /* Read Mode (A) */
535 mt9t112_mcu_write(ret, client, VAR(18, 12), 0x0024);
536
537 /* Fine Correction (A) */
538 mt9t112_mcu_write(ret, client, VAR(18, 15), 0x00CC);
539
540 /* Fine IT Min (A) */
541 mt9t112_mcu_write(ret, client, VAR(18, 17), 0x01f1);
542
543 /* Fine IT Max Margin (A) */
544 mt9t112_mcu_write(ret, client, VAR(18, 19), 0x00fF);
545
546 /* Base Frame Lines (A) */
547 mt9t112_mcu_write(ret, client, VAR(18, 29), 0x032D);
548
549 /* Min Line Length (A) */
550 mt9t112_mcu_write(ret, client, VAR(18, 31), 0x073a);
551
552 /* Line Length (A) */
553 mt9t112_mcu_write(ret, client, VAR(18, 37), 0x07d0);
554
555 /* Adaptive Output Clock (B) */
556 mt9t112_mcu_mask_set(ret, client, VAR(27, 160), 0x0040, 0x0000);
557
558 /* Row Start (B) */
559 mt9t112_mcu_write(ret, client, VAR(18, 74), 0x004);
560
561 /* Column Start (B) */
562 mt9t112_mcu_write(ret, client, VAR(18, 76), 0x004);
563
564 /* Row End (B) */
565 mt9t112_mcu_write(ret, client, VAR(18, 78), 0x60B);
566
567 /* Column End (B) */
568 mt9t112_mcu_write(ret, client, VAR(18, 80), 0x80B);
569
570 /* Fine Correction (B) */
571 mt9t112_mcu_write(ret, client, VAR(18, 87), 0x008C);
572
573 /* Fine IT Min (B) */
574 mt9t112_mcu_write(ret, client, VAR(18, 89), 0x01F1);
575
576 /* Fine IT Max Margin (B) */
577 mt9t112_mcu_write(ret, client, VAR(18, 91), 0x00FF);
578
579 /* Base Frame Lines (B) */
580 mt9t112_mcu_write(ret, client, VAR(18, 101), 0x0668);
581
582 /* Min Line Length (B) */
583 mt9t112_mcu_write(ret, client, VAR(18, 103), 0x0AF0);
584
585 /* Line Length (B) */
586 mt9t112_mcu_write(ret, client, VAR(18, 109), 0x0AF0);
587
588 /*
589 * Flicker Dectection registers
590 * This section should be replaced whenever new Timing file is generated
591 * All the following registers need to be replaced
592 * Following registers are generated from Register Wizard but user can
593 * modify them. For detail see auto flicker detection tuning
594 */
595
596 /* FD_FDPERIOD_SELECT */
597 mt9t112_mcu_write(ret, client, VAR8(8, 5), 0x01);
598
599 /* PRI_B_CONFIG_FD_ALGO_RUN */
600 mt9t112_mcu_write(ret, client, VAR(27, 17), 0x0003);
601
602 /* PRI_A_CONFIG_FD_ALGO_RUN */
603 mt9t112_mcu_write(ret, client, VAR(26, 17), 0x0003);
604
605 /*
606 * AFD range detection tuning registers
607 */
608
609 /* search_f1_50 */
610 mt9t112_mcu_write(ret, client, VAR8(18, 165), 0x25);
611
612 /* search_f2_50 */
613 mt9t112_mcu_write(ret, client, VAR8(18, 166), 0x28);
614
615 /* search_f1_60 */
616 mt9t112_mcu_write(ret, client, VAR8(18, 167), 0x2C);
617
618 /* search_f2_60 */
619 mt9t112_mcu_write(ret, client, VAR8(18, 168), 0x2F);
620
621 /* period_50Hz (A) */
622 mt9t112_mcu_write(ret, client, VAR8(18, 68), 0xBA);
623
624 /* secret register by aptina */
625 /* period_50Hz (A MSB) */
626 mt9t112_mcu_write(ret, client, VAR8(18, 303), 0x00);
627
628 /* period_60Hz (A) */
629 mt9t112_mcu_write(ret, client, VAR8(18, 69), 0x9B);
630
631 /* secret register by aptina */
632 /* period_60Hz (A MSB) */
633 mt9t112_mcu_write(ret, client, VAR8(18, 301), 0x00);
634
635 /* period_50Hz (B) */
636 mt9t112_mcu_write(ret, client, VAR8(18, 140), 0x82);
637
638 /* secret register by aptina */
639 /* period_50Hz (B) MSB */
640 mt9t112_mcu_write(ret, client, VAR8(18, 304), 0x00);
641
642 /* period_60Hz (B) */
643 mt9t112_mcu_write(ret, client, VAR8(18, 141), 0x6D);
644
645 /* secret register by aptina */
646 /* period_60Hz (B) MSB */
647 mt9t112_mcu_write(ret, client, VAR8(18, 302), 0x00);
648
649 /* FD Mode */
650 mt9t112_mcu_write(ret, client, VAR8(8, 2), 0x10);
651
652 /* Stat_min */
653 mt9t112_mcu_write(ret, client, VAR8(8, 9), 0x02);
654
655 /* Stat_max */
656 mt9t112_mcu_write(ret, client, VAR8(8, 10), 0x03);
657
658 /* Min_amplitude */
659 mt9t112_mcu_write(ret, client, VAR8(8, 12), 0x0A);
660
661 /* RX FIFO Watermark (A) */
662 mt9t112_mcu_write(ret, client, VAR(18, 70), 0x0014);
663
664 /* RX FIFO Watermark (B) */
665 mt9t112_mcu_write(ret, client, VAR(18, 142), 0x0014);
666
667 /* MCLK: 16MHz
668 * PCLK: 73MHz
669 * CorePixCLK: 36.5 MHz
670 */
671 mt9t112_mcu_write(ret, client, VAR8(18, 0x0044), 133);
672 mt9t112_mcu_write(ret, client, VAR8(18, 0x0045), 110);
673 mt9t112_mcu_write(ret, client, VAR8(18, 0x008c), 130);
674 mt9t112_mcu_write(ret, client, VAR8(18, 0x008d), 108);
675
676 mt9t112_mcu_write(ret, client, VAR8(18, 0x00A5), 27);
677 mt9t112_mcu_write(ret, client, VAR8(18, 0x00a6), 30);
678 mt9t112_mcu_write(ret, client, VAR8(18, 0x00a7), 32);
679 mt9t112_mcu_write(ret, client, VAR8(18, 0x00a8), 35);
680
681 return ret;
682}
683
684static int mt9t112_auto_focus_setting(const struct i2c_client *client)
685{
686 int ret;
687
688 mt9t112_mcu_write(ret, client, VAR(12, 13), 0x000F);
689 mt9t112_mcu_write(ret, client, VAR(12, 23), 0x0F0F);
690 mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
691
692 mt9t112_reg_write(ret, client, 0x0614, 0x0000);
693
694 mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x05);
695 mt9t112_mcu_write(ret, client, VAR8(12, 2), 0x02);
696 mt9t112_mcu_write(ret, client, VAR(12, 3), 0x0002);
697 mt9t112_mcu_write(ret, client, VAR(17, 3), 0x8001);
698 mt9t112_mcu_write(ret, client, VAR(17, 11), 0x0025);
699 mt9t112_mcu_write(ret, client, VAR(17, 13), 0x0193);
700 mt9t112_mcu_write(ret, client, VAR8(17, 33), 0x18);
701 mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x05);
702
703 return ret;
704}
705
706static int mt9t112_auto_focus_trigger(const struct i2c_client *client)
707{
708 int ret;
709
710 mt9t112_mcu_write(ret, client, VAR8(12, 25), 0x01);
711
712 return ret;
713}
714
715static int mt9t112_init_camera(const struct i2c_client *client)
716{
717 int ret;
718
719 ECHECKER(ret, mt9t112_reset(client));
720
721 ECHECKER(ret, mt9t112_init_pll(client));
722
723 ECHECKER(ret, mt9t112_init_setting(client));
724
725 ECHECKER(ret, mt9t112_auto_focus_setting(client));
726
727 mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0);
728
729 /* Analog setting B */
730 mt9t112_reg_write(ret, client, 0x3084, 0x2409);
731 mt9t112_reg_write(ret, client, 0x3092, 0x0A49);
732 mt9t112_reg_write(ret, client, 0x3094, 0x4949);
733 mt9t112_reg_write(ret, client, 0x3096, 0x4950);
734
735 /*
736 * Disable adaptive clock
737 * PRI_A_CONFIG_JPEG_OB_TX_CONTROL_VAR
738 * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR
739 */
740 mt9t112_mcu_write(ret, client, VAR(26, 160), 0x0A2E);
741 mt9t112_mcu_write(ret, client, VAR(27, 160), 0x0A2E);
742
743 /* Configure STatus in Status_before_length Format and enable header */
744 /* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */
745 mt9t112_mcu_write(ret, client, VAR(27, 144), 0x0CB4);
746
747 /* Enable JPEG in context B */
748 /* PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR */
749 mt9t112_mcu_write(ret, client, VAR8(27, 142), 0x01);
750
751 /* Disable Dac_TXLO */
752 mt9t112_reg_write(ret, client, 0x316C, 0x350F);
753
754 /* Set max slew rates */
755 mt9t112_reg_write(ret, client, 0x1E, 0x777);
756
757 return ret;
758}
759
760/************************************************************************
761
762
763 soc_camera_ops
764
765
766************************************************************************/
767static int mt9t112_set_bus_param(struct soc_camera_device *icd,
768 unsigned long flags)
769{
770 return 0;
771}
772
773static unsigned long mt9t112_query_bus_param(struct soc_camera_device *icd)
774{
775 struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
776 struct mt9t112_priv *priv = to_mt9t112(client);
777 struct soc_camera_link *icl = to_soc_camera_link(icd);
778 unsigned long flags = SOCAM_MASTER | SOCAM_VSYNC_ACTIVE_HIGH |
779 SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_HIGH;
780
781 flags |= (priv->info->flags & MT9T112_FLAG_PCLK_RISING_EDGE) ?
782 SOCAM_PCLK_SAMPLE_RISING : SOCAM_PCLK_SAMPLE_FALLING;
783
784 if (priv->info->flags & MT9T112_FLAG_DATAWIDTH_8)
785 flags |= SOCAM_DATAWIDTH_8;
786 else
787 flags |= SOCAM_DATAWIDTH_10;
788
789 return soc_camera_apply_sensor_flags(icl, flags);
790}
791
792static struct soc_camera_ops mt9t112_ops = {
793 .set_bus_param = mt9t112_set_bus_param,
794 .query_bus_param = mt9t112_query_bus_param,
795};
796
797/************************************************************************
798
799
800 v4l2_subdev_core_ops
801
802
803************************************************************************/
804static int mt9t112_g_chip_ident(struct v4l2_subdev *sd,
805 struct v4l2_dbg_chip_ident *id)
806{
807 struct i2c_client *client = sd->priv;
808 struct mt9t112_priv *priv = to_mt9t112(client);
809
810 id->ident = priv->model;
811 id->revision = 0;
812
813 return 0;
814}
815
816#ifdef CONFIG_VIDEO_ADV_DEBUG
817static int mt9t112_g_register(struct v4l2_subdev *sd,
818 struct v4l2_dbg_register *reg)
819{
820 struct i2c_client *client = sd->priv;
821 int ret;
822
823 reg->size = 2;
824 mt9t112_reg_read(ret, client, reg->reg);
825
826 reg->val = (__u64)ret;
827
828 return 0;
829}
830
831static int mt9t112_s_register(struct v4l2_subdev *sd,
832 struct v4l2_dbg_register *reg)
833{
834 struct i2c_client *client = sd->priv;
835 int ret;
836
837 mt9t112_reg_write(ret, client, reg->reg, reg->val);
838
839 return ret;
840}
841#endif
842
843static struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = {
844 .g_chip_ident = mt9t112_g_chip_ident,
845#ifdef CONFIG_VIDEO_ADV_DEBUG
846 .g_register = mt9t112_g_register,
847 .s_register = mt9t112_s_register,
848#endif
849};
850
851
852/************************************************************************
853
854
855 v4l2_subdev_video_ops
856
857
858************************************************************************/
859static int mt9t112_s_stream(struct v4l2_subdev *sd, int enable)
860{
861 struct i2c_client *client = sd->priv;
862 struct mt9t112_priv *priv = to_mt9t112(client);
863 int ret = 0;
864
865 if (!enable) {
866 /* FIXME
867 *
868 * If user selected large output size,
869 * and used it long time,
870 * mt9t112 camera will be very warm.
871 *
872 * But current driver can not stop mt9t112 camera.
873 * So, set small size here to solve this problem.
874 */
875 mt9t112_set_a_frame_size(client, VGA_WIDTH, VGA_HEIGHT);
876 return ret;
877 }
878
879 if (!(priv->flags & INIT_DONE)) {
880 u16 param = (MT9T112_FLAG_PCLK_RISING_EDGE &
881 priv->info->flags) ? 0x0001 : 0x0000;
882
883 ECHECKER(ret, mt9t112_init_camera(client));
884
885 /* Invert PCLK (Data sampled on falling edge of pixclk) */
886 mt9t112_reg_write(ret, client, 0x3C20, param);
887
888 mdelay(5);
889
890 priv->flags |= INIT_DONE;
891 }
892
893 mt9t112_mcu_write(ret, client, VAR(26, 7), priv->format->fmt);
894 mt9t112_mcu_write(ret, client, VAR(26, 9), priv->format->order);
895 mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06);
896
897 mt9t112_set_a_frame_size(client,
898 priv->frame.width,
899 priv->frame.height);
900
901 ECHECKER(ret, mt9t112_auto_focus_trigger(client));
902
903 dev_dbg(&client->dev, "format : %d\n", priv->format->code);
904 dev_dbg(&client->dev, "size : %d x %d\n",
905 priv->frame.width,
906 priv->frame.height);
907
908 CLOCK_INFO(client, EXT_CLOCK);
909
910 return ret;
911}
912
913static int mt9t112_set_params(struct i2c_client *client, u32 width, u32 height,
914 enum v4l2_mbus_pixelcode code)
915{
916 struct mt9t112_priv *priv = to_mt9t112(client);
917 int i;
918
919 priv->format = NULL;
920
921 /*
922 * frame size check
923 */
924 mt9t112_frame_check(&width, &height);
925
926 /*
927 * get color format
928 */
929 for (i = 0; i < ARRAY_SIZE(mt9t112_cfmts); i++)
930 if (mt9t112_cfmts[i].code == code)
931 break;
932
933 if (i == ARRAY_SIZE(mt9t112_cfmts))
934 return -EINVAL;
935
936 priv->frame.width = (u16)width;
937 priv->frame.height = (u16)height;
938
939 priv->format = mt9t112_cfmts + i;
940
941 return 0;
942}
943
944static int mt9t112_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
945{
946 a->bounds.left = 0;
947 a->bounds.top = 0;
948 a->bounds.width = VGA_WIDTH;
949 a->bounds.height = VGA_HEIGHT;
950 a->defrect = a->bounds;
951 a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
952 a->pixelaspect.numerator = 1;
953 a->pixelaspect.denominator = 1;
954
955 return 0;
956}
957
958static int mt9t112_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
959{
960 a->c.left = 0;
961 a->c.top = 0;
962 a->c.width = VGA_WIDTH;
963 a->c.height = VGA_HEIGHT;
964 a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
965
966 return 0;
967}
968
969static int mt9t112_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
970{
971 struct i2c_client *client = sd->priv;
972 struct v4l2_rect *rect = &a->c;
973
974 return mt9t112_set_params(client, rect->width, rect->height,
975 V4L2_MBUS_FMT_YUYV8_2X8_BE);
976}
977
978static int mt9t112_g_fmt(struct v4l2_subdev *sd,
979 struct v4l2_mbus_framefmt *mf)
980{
981 struct i2c_client *client = sd->priv;
982 struct mt9t112_priv *priv = to_mt9t112(client);
983
984 if (!priv->format) {
985 int ret = mt9t112_set_params(client, VGA_WIDTH, VGA_HEIGHT,
986 V4L2_MBUS_FMT_YUYV8_2X8_BE);
987 if (ret < 0)
988 return ret;
989 }
990
991 mf->width = priv->frame.width;
992 mf->height = priv->frame.height;
993 /* TODO: set colorspace */
994 mf->code = priv->format->code;
995 mf->field = V4L2_FIELD_NONE;
996
997 return 0;
998}
999
1000static int mt9t112_s_fmt(struct v4l2_subdev *sd,
1001 struct v4l2_mbus_framefmt *mf)
1002{
1003 struct i2c_client *client = sd->priv;
1004
1005 /* TODO: set colorspace */
1006 return mt9t112_set_params(client, mf->width, mf->height, mf->code);
1007}
1008
1009static int mt9t112_try_fmt(struct v4l2_subdev *sd,
1010 struct v4l2_mbus_framefmt *mf)
1011{
1012 mt9t112_frame_check(&mf->width, &mf->height);
1013
1014 /* TODO: set colorspace */
1015 mf->field = V4L2_FIELD_NONE;
1016
1017 return 0;
1018}
1019
1020static int mt9t112_enum_fmt(struct v4l2_subdev *sd, int index,
1021 enum v4l2_mbus_pixelcode *code)
1022{
1023 if ((unsigned int)index >= ARRAY_SIZE(mt9t112_cfmts))
1024 return -EINVAL;
1025
1026 *code = mt9t112_cfmts[index].code;
1027 return 0;
1028}
1029
1030static struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = {
1031 .s_stream = mt9t112_s_stream,
1032 .g_mbus_fmt = mt9t112_g_fmt,
1033 .s_mbus_fmt = mt9t112_s_fmt,
1034 .try_mbus_fmt = mt9t112_try_fmt,
1035 .cropcap = mt9t112_cropcap,
1036 .g_crop = mt9t112_g_crop,
1037 .s_crop = mt9t112_s_crop,
1038 .enum_mbus_fmt = mt9t112_enum_fmt,
1039};
1040
1041/************************************************************************
1042
1043
1044 i2c driver
1045
1046
1047************************************************************************/
1048static struct v4l2_subdev_ops mt9t112_subdev_ops = {
1049 .core = &mt9t112_subdev_core_ops,
1050 .video = &mt9t112_subdev_video_ops,
1051};
1052
1053static int mt9t112_camera_probe(struct soc_camera_device *icd,
1054 struct i2c_client *client)
1055{
1056 struct mt9t112_priv *priv = to_mt9t112(client);
1057 const char *devname;
1058 int chipid;
1059
1060 /*
1061 * We must have a parent by now. And it cannot be a wrong one.
1062 * So this entire test is completely redundant.
1063 */
1064 if (!icd->dev.parent ||
1065 to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
1066 return -ENODEV;
1067
1068 /*
1069 * check and show chip ID
1070 */
1071 mt9t112_reg_read(chipid, client, 0x0000);
1072
1073 switch (chipid) {
1074 case 0x2680:
1075 devname = "mt9t111";
1076 priv->model = V4L2_IDENT_MT9T111;
1077 break;
1078 case 0x2682:
1079 devname = "mt9t112";
1080 priv->model = V4L2_IDENT_MT9T112;
1081 break;
1082 default:
1083 dev_err(&client->dev, "Product ID error %04x\n", chipid);
1084 return -ENODEV;
1085 }
1086
1087 dev_info(&client->dev, "%s chip ID %04x\n", devname, chipid);
1088
1089 return 0;
1090}
1091
1092static int mt9t112_probe(struct i2c_client *client,
1093 const struct i2c_device_id *did)
1094{
1095 struct mt9t112_priv *priv;
1096 struct soc_camera_device *icd = client->dev.platform_data;
1097 struct soc_camera_link *icl;
1098 int ret;
1099
1100 if (!icd) {
1101 dev_err(&client->dev, "mt9t112: missing soc-camera data!\n");
1102 return -EINVAL;
1103 }
1104
1105 icl = to_soc_camera_link(icd);
1106 if (!icl || !icl->priv)
1107 return -EINVAL;
1108
1109 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1110 if (!priv)
1111 return -ENOMEM;
1112
1113 priv->info = icl->priv;
1114
1115 v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops);
1116
1117 icd->ops = &mt9t112_ops;
1118
1119 ret = mt9t112_camera_probe(icd, client);
1120 if (ret) {
1121 icd->ops = NULL;
1122 i2c_set_clientdata(client, NULL);
1123 kfree(priv);
1124 }
1125
1126 return ret;
1127}
1128
1129static int mt9t112_remove(struct i2c_client *client)
1130{
1131 struct mt9t112_priv *priv = to_mt9t112(client);
1132 struct soc_camera_device *icd = client->dev.platform_data;
1133
1134 icd->ops = NULL;
1135 i2c_set_clientdata(client, NULL);
1136 kfree(priv);
1137 return 0;
1138}
1139
1140static const struct i2c_device_id mt9t112_id[] = {
1141 { "mt9t112", 0 },
1142 { }
1143};
1144MODULE_DEVICE_TABLE(i2c, mt9t112_id);
1145
1146static struct i2c_driver mt9t112_i2c_driver = {
1147 .driver = {
1148 .name = "mt9t112",
1149 },
1150 .probe = mt9t112_probe,
1151 .remove = mt9t112_remove,
1152 .id_table = mt9t112_id,
1153};
1154
1155/************************************************************************
1156
1157
1158 module function
1159
1160
1161************************************************************************/
1162static int __init mt9t112_module_init(void)
1163{
1164 return i2c_add_driver(&mt9t112_i2c_driver);
1165}
1166
1167static void __exit mt9t112_module_exit(void)
1168{
1169 i2c_del_driver(&mt9t112_i2c_driver);
1170}
1171
1172module_init(mt9t112_module_init);
1173module_exit(mt9t112_module_exit);
1174
1175MODULE_DESCRIPTION("SoC Camera driver for mt9t112");
1176MODULE_AUTHOR("Kuninori Morimoto");
1177MODULE_LICENSE("GPL v2");