blob: 050773c368238d0d6fe7ffdd53db1e3ecc5ebc62 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Low-level parallel-support for PC-style hardware integrated in the
3 * LASI-Controller (on GSC-Bus) for HP-PARISC Workstations
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 *
10 * (C) 1999-2001 by Helge Deller <deller@gmx.de>
11 *
12 *
13 * based on parport_pc.c by
14 * Grant Guenther <grant@torque.net>
15 * Phil Blundell <philb@gnu.org>
16 * Tim Waugh <tim@cyberelk.demon.co.uk>
17 * Jose Renau <renau@acm.org>
Adrian Bunkbdca3f22006-06-26 18:19:23 +020018 * David Campbell
Linus Torvalds1da177e2005-04-16 15:20:36 -070019 * Andrea Arcangeli
20 */
21
22#undef DEBUG /* undef for production */
23
24#include <linux/module.h>
25#include <linux/init.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070026#include <linux/delay.h>
27#include <linux/errno.h>
28#include <linux/interrupt.h>
29#include <linux/ioport.h>
30#include <linux/kernel.h>
31#include <linux/slab.h>
32#include <linux/pci.h>
33#include <linux/sysctl.h>
34
35#include <asm/io.h>
36#include <asm/dma.h>
37#include <asm/uaccess.h>
38#include <asm/superio.h>
39
40#include <linux/parport.h>
41#include <asm/pdc.h>
42#include <asm/parisc-device.h>
43#include <asm/hardware.h>
44#include "parport_gsc.h"
45
46
47MODULE_AUTHOR("Helge Deller <deller@gmx.de>");
48MODULE_DESCRIPTION("HP-PARISC PC-style parallel port driver");
49MODULE_SUPPORTED_DEVICE("integrated PC-style parallel port");
50MODULE_LICENSE("GPL");
51
52
53/*
54 * Clear TIMEOUT BIT in EPP MODE
55 *
56 * This is also used in SPP detection.
57 */
58static int clear_epp_timeout(struct parport *pb)
59{
60 unsigned char r;
61
62 if (!(parport_gsc_read_status(pb) & 0x01))
63 return 1;
64
65 /* To clear timeout some chips require double read */
66 parport_gsc_read_status(pb);
67 r = parport_gsc_read_status(pb);
68 parport_writeb (r | 0x01, STATUS (pb)); /* Some reset by writing 1 */
69 parport_writeb (r & 0xfe, STATUS (pb)); /* Others by writing 0 */
70 r = parport_gsc_read_status(pb);
71
72 return !(r & 0x01);
73}
74
75/*
76 * Access functions.
77 *
78 * Most of these aren't static because they may be used by the
79 * parport_xxx_yyy macros. extern __inline__ versions of several
80 * of these are in parport_gsc.h.
81 */
82
Linus Torvalds1da177e2005-04-16 15:20:36 -070083void parport_gsc_init_state(struct pardevice *dev, struct parport_state *s)
84{
85 s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
86}
87
88void parport_gsc_save_state(struct parport *p, struct parport_state *s)
89{
90 s->u.pc.ctr = parport_readb (CONTROL (p));
91}
92
93void parport_gsc_restore_state(struct parport *p, struct parport_state *s)
94{
95 parport_writeb (s->u.pc.ctr, CONTROL (p));
96}
97
98struct parport_operations parport_gsc_ops =
99{
100 .write_data = parport_gsc_write_data,
101 .read_data = parport_gsc_read_data,
102
103 .write_control = parport_gsc_write_control,
104 .read_control = parport_gsc_read_control,
105 .frob_control = parport_gsc_frob_control,
106
107 .read_status = parport_gsc_read_status,
108
109 .enable_irq = parport_gsc_enable_irq,
110 .disable_irq = parport_gsc_disable_irq,
111
112 .data_forward = parport_gsc_data_forward,
113 .data_reverse = parport_gsc_data_reverse,
114
115 .init_state = parport_gsc_init_state,
116 .save_state = parport_gsc_save_state,
117 .restore_state = parport_gsc_restore_state,
118
119 .epp_write_data = parport_ieee1284_epp_write_data,
120 .epp_read_data = parport_ieee1284_epp_read_data,
121 .epp_write_addr = parport_ieee1284_epp_write_addr,
122 .epp_read_addr = parport_ieee1284_epp_read_addr,
123
124 .ecp_write_data = parport_ieee1284_ecp_write_data,
125 .ecp_read_data = parport_ieee1284_ecp_read_data,
126 .ecp_write_addr = parport_ieee1284_ecp_write_addr,
127
128 .compat_write_data = parport_ieee1284_write_compat,
129 .nibble_read_data = parport_ieee1284_read_nibble,
130 .byte_read_data = parport_ieee1284_read_byte,
131
132 .owner = THIS_MODULE,
133};
134
135/* --- Mode detection ------------------------------------- */
136
137/*
138 * Checks for port existence, all ports support SPP MODE
139 */
Greg Kroah-Hartman312faca2012-12-21 13:23:14 -0800140static int parport_SPP_supported(struct parport *pb)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700141{
142 unsigned char r, w;
143
144 /*
145 * first clear an eventually pending EPP timeout
146 * I (sailer@ife.ee.ethz.ch) have an SMSC chipset
147 * that does not even respond to SPP cycles if an EPP
148 * timeout is pending
149 */
150 clear_epp_timeout(pb);
151
152 /* Do a simple read-write test to make sure the port exists. */
153 w = 0xc;
154 parport_writeb (w, CONTROL (pb));
155
156 /* Is there a control register that we can read from? Some
157 * ports don't allow reads, so read_control just returns a
158 * software copy. Some ports _do_ allow reads, so bypass the
159 * software copy here. In addition, some bits aren't
160 * writable. */
161 r = parport_readb (CONTROL (pb));
162 if ((r & 0xf) == w) {
163 w = 0xe;
164 parport_writeb (w, CONTROL (pb));
165 r = parport_readb (CONTROL (pb));
166 parport_writeb (0xc, CONTROL (pb));
167 if ((r & 0xf) == w)
168 return PARPORT_MODE_PCSPP;
169 }
170
171 /* Try the data register. The data lines aren't tri-stated at
172 * this stage, so we expect back what we wrote. */
173 w = 0xaa;
174 parport_gsc_write_data (pb, w);
175 r = parport_gsc_read_data (pb);
176 if (r == w) {
177 w = 0x55;
178 parport_gsc_write_data (pb, w);
179 r = parport_gsc_read_data (pb);
180 if (r == w)
181 return PARPORT_MODE_PCSPP;
182 }
183
184 return 0;
185}
186
187/* Detect PS/2 support.
188 *
189 * Bit 5 (0x20) sets the PS/2 data direction; setting this high
190 * allows us to read data from the data lines. In theory we would get back
191 * 0xff but any peripheral attached to the port may drag some or all of the
192 * lines down to zero. So if we get back anything that isn't the contents
193 * of the data register we deem PS/2 support to be present.
194 *
195 * Some SPP ports have "half PS/2" ability - you can't turn off the line
196 * drivers, but an external peripheral with sufficiently beefy drivers of
197 * its own can overpower them and assert its own levels onto the bus, from
198 * where they can then be read back as normal. Ports with this property
199 * and the right type of device attached are likely to fail the SPP test,
200 * (as they will appear to have stuck bits) and so the fact that they might
201 * be misdetected here is rather academic.
202 */
203
Greg Kroah-Hartman312faca2012-12-21 13:23:14 -0800204static int parport_PS2_supported(struct parport *pb)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700205{
206 int ok = 0;
207
208 clear_epp_timeout(pb);
209
210 /* try to tri-state the buffer */
211 parport_gsc_data_reverse (pb);
212
213 parport_gsc_write_data(pb, 0x55);
214 if (parport_gsc_read_data(pb) != 0x55) ok++;
215
216 parport_gsc_write_data(pb, 0xaa);
217 if (parport_gsc_read_data(pb) != 0xaa) ok++;
218
219 /* cancel input mode */
220 parport_gsc_data_forward (pb);
221
222 if (ok) {
223 pb->modes |= PARPORT_MODE_TRISTATE;
224 } else {
225 struct parport_gsc_private *priv = pb->private_data;
226 priv->ctr_writable &= ~0x20;
227 }
228
229 return ok;
230}
231
232
233/* --- Initialisation code -------------------------------- */
234
Greg Kroah-Hartman312faca2012-12-21 13:23:14 -0800235struct parport *parport_gsc_probe_port(unsigned long base,
236 unsigned long base_hi, int irq,
237 int dma, struct pci_dev *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700238{
239 struct parport_gsc_private *priv;
240 struct parport_operations *ops;
241 struct parport tmp;
242 struct parport *p = &tmp;
243
Helge Dellercb6fc182006-01-17 12:40:40 -0700244 priv = kzalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245 if (!priv) {
246 printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
247 return NULL;
248 }
249 ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
250 if (!ops) {
251 printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
252 base);
253 kfree (priv);
254 return NULL;
255 }
256 memcpy (ops, &parport_gsc_ops, sizeof (struct parport_operations));
257 priv->ctr = 0xc;
258 priv->ctr_writable = 0xff;
259 priv->dma_buf = 0;
260 priv->dma_handle = 0;
261 priv->dev = dev;
262 p->base = base;
263 p->base_hi = base_hi;
264 p->irq = irq;
265 p->dma = dma;
266 p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
267 p->ops = ops;
268 p->private_data = priv;
269 p->physport = p;
270 if (!parport_SPP_supported (p)) {
271 /* No port. */
272 kfree (priv);
Wei Yongjun9986ffd2012-09-03 18:09:53 +0800273 kfree(ops);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700274 return NULL;
275 }
276 parport_PS2_supported (p);
277
278 if (!(p = parport_register_port(base, PARPORT_IRQ_NONE,
279 PARPORT_DMA_NONE, ops))) {
280 kfree (priv);
281 kfree (ops);
282 return NULL;
283 }
284
285 p->base_hi = base_hi;
286 p->modes = tmp.modes;
287 p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
288 p->private_data = priv;
289
290 printk(KERN_INFO "%s: PC-style at 0x%lx", p->name, p->base);
291 p->irq = irq;
292 if (p->irq == PARPORT_IRQ_AUTO) {
293 p->irq = PARPORT_IRQ_NONE;
294 }
295 if (p->irq != PARPORT_IRQ_NONE) {
296 printk(", irq %d", p->irq);
297
298 if (p->dma == PARPORT_DMA_AUTO) {
299 p->dma = PARPORT_DMA_NONE;
300 }
301 }
302 if (p->dma == PARPORT_DMA_AUTO) /* To use DMA, giving the irq
303 is mandatory (see above) */
304 p->dma = PARPORT_DMA_NONE;
305
306 printk(" [");
307#define printmode(x) {if(p->modes&PARPORT_MODE_##x){printk("%s%s",f?",":"",#x);f++;}}
308 {
309 int f = 0;
310 printmode(PCSPP);
311 printmode(TRISTATE);
312 printmode(COMPAT)
313 printmode(EPP);
314// printmode(ECP);
315// printmode(DMA);
316 }
317#undef printmode
318 printk("]\n");
319
320 if (p->irq != PARPORT_IRQ_NONE) {
Jeff Garzik3f2e40d2007-10-19 01:42:14 -0400321 if (request_irq (p->irq, parport_irq_handler,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700322 0, p->name, p)) {
323 printk (KERN_WARNING "%s: irq %d in use, "
324 "resorting to polled operation\n",
325 p->name, p->irq);
326 p->irq = PARPORT_IRQ_NONE;
327 p->dma = PARPORT_DMA_NONE;
328 }
329 }
330
331 /* Done probing. Now put the port into a sensible start-up state. */
332
333 parport_gsc_write_data(p, 0);
334 parport_gsc_data_forward (p);
335
336 /* Now that we've told the sharing engine about the port, and
337 found out its characteristics, let the high-level drivers
338 know about it. */
339 parport_announce_port (p);
340
341 return p;
342}
343
344
345#define PARPORT_GSC_OFFSET 0x800
346
Greg Kroah-Hartman312faca2012-12-21 13:23:14 -0800347static int parport_count;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700348
Greg Kroah-Hartman312faca2012-12-21 13:23:14 -0800349static int parport_init_chip(struct parisc_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700350{
351 struct parport *p;
352 unsigned long port;
353
354 if (!dev->irq) {
Alexander Beregalovb5d598b2009-05-28 14:34:33 -0700355 printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
356 (unsigned long long)dev->hpa.start);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700357 return -ENODEV;
358 }
359
Matthew Wilcox53f01bb2005-10-21 22:36:40 -0400360 port = dev->hpa.start + PARPORT_GSC_OFFSET;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700361
362 /* some older machines with ASP-chip don't support
363 * the enhanced parport modes.
364 */
365 if (boot_cpu_data.cpu_type > pcxt && !pdc_add_valid(port+4)) {
366
367 /* Initialize bidirectional-mode (0x10) & data-tranfer-mode #1 (0x20) */
Harvey Harrison145980a2008-04-30 00:54:57 -0700368 printk("%s: initialize bidirectional-mode.\n", __func__);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700369 parport_writeb ( (0x10 + 0x20), port + 4);
370
371 } else {
Harvey Harrison145980a2008-04-30 00:54:57 -0700372 printk("%s: enhanced parport-modes not supported.\n", __func__);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700373 }
374
375 p = parport_gsc_probe_port(port, 0, dev->irq,
376 /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL);
377 if (p)
378 parport_count++;
Greg Kroah-Hartman61616112009-05-04 12:40:54 -0700379 dev_set_drvdata(&dev->dev, p);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700380
381 return 0;
382}
383
Greg Kroah-Hartman312faca2012-12-21 13:23:14 -0800384static int parport_remove_chip(struct parisc_device *dev)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700385{
Greg Kroah-Hartman61616112009-05-04 12:40:54 -0700386 struct parport *p = dev_get_drvdata(&dev->dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700387 if (p) {
388 struct parport_gsc_private *priv = p->private_data;
389 struct parport_operations *ops = p->ops;
390 parport_remove_port(p);
391 if (p->dma != PARPORT_DMA_NONE)
392 free_dma(p->dma);
393 if (p->irq != PARPORT_IRQ_NONE)
394 free_irq(p->irq, p);
395 if (priv->dma_buf)
396 pci_free_consistent(priv->dev, PAGE_SIZE,
397 priv->dma_buf,
398 priv->dma_handle);
399 kfree (p->private_data);
400 parport_put_port(p);
401 kfree (ops); /* hope no-one cached it */
402 }
403 return 0;
404}
405
406static struct parisc_device_id parport_tbl[] = {
407 { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x74 },
408 { 0, }
409};
410
411MODULE_DEVICE_TABLE(parisc, parport_tbl);
412
413static struct parisc_driver parport_driver = {
414 .name = "Parallel",
415 .id_table = parport_tbl,
416 .probe = parport_init_chip,
Greg Kroah-Hartman312faca2012-12-21 13:23:14 -0800417 .remove = parport_remove_chip,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700418};
419
Greg Kroah-Hartman312faca2012-12-21 13:23:14 -0800420int parport_gsc_init(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700421{
422 return register_parisc_driver(&parport_driver);
423}
424
Greg Kroah-Hartman312faca2012-12-21 13:23:14 -0800425static void parport_gsc_exit(void)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700426{
427 unregister_parisc_driver(&parport_driver);
428}
429
430module_init(parport_gsc_init);
431module_exit(parport_gsc_exit);