blob: 85841ee70b17fc4dab51fc4ebc2d9886e5584de0 [file] [log] [blame]
John Crispin935c5002011-03-30 09:27:56 +02001/*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License version 2 as published
4 * by the Free Software Foundation.
5 *
John Crispin54f30062012-05-16 22:22:47 +02006 * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
John Crispin935c5002011-03-30 09:27:56 +02007 *
8 */
9
10#include <linux/slab.h>
11#include <linux/init.h>
John Crispin54f30062012-05-16 22:22:47 +020012#include <linux/module.h>
John Crispin935c5002011-03-30 09:27:56 +020013#include <linux/types.h>
John Crispin54f30062012-05-16 22:22:47 +020014#include <linux/of_platform.h>
John Crispin935c5002011-03-30 09:27:56 +020015#include <linux/mutex.h>
John Crispin935c5002011-03-30 09:27:56 +020016#include <linux/gpio.h>
John Crispin54f30062012-05-16 22:22:47 +020017#include <linux/io.h>
18#include <linux/of_gpio.h>
19#include <linux/clk.h>
20#include <linux/err.h>
John Crispin935c5002011-03-30 09:27:56 +020021
22#include <lantiq_soc.h>
23
John Crispin54f30062012-05-16 22:22:47 +020024/*
25 * The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
26 * peripheral controller used to drive external shift register cascades. At most
27 * 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem
28 * to drive the 2 LSBs of the cascade automatically.
29 */
John Crispin935c5002011-03-30 09:27:56 +020030
John Crispin54f30062012-05-16 22:22:47 +020031/* control register 0 */
32#define XWAY_STP_CON0 0x00
33/* control register 1 */
34#define XWAY_STP_CON1 0x04
35/* data register 0 */
36#define XWAY_STP_CPU0 0x08
37/* data register 1 */
38#define XWAY_STP_CPU1 0x0C
39/* access register */
40#define XWAY_STP_AR 0x10
John Crispin935c5002011-03-30 09:27:56 +020041
John Crispin54f30062012-05-16 22:22:47 +020042/* software or hardware update select bit */
43#define XWAY_STP_CON_SWU BIT(31)
John Crispin935c5002011-03-30 09:27:56 +020044
John Crispin54f30062012-05-16 22:22:47 +020045/* automatic update rates */
46#define XWAY_STP_2HZ 0
47#define XWAY_STP_4HZ BIT(23)
48#define XWAY_STP_8HZ BIT(24)
49#define XWAY_STP_10HZ (BIT(24) | BIT(23))
50#define XWAY_STP_SPEED_MASK (0xf << 23)
John Crispin935c5002011-03-30 09:27:56 +020051
John Crispin54f30062012-05-16 22:22:47 +020052/* clock source for automatic update */
53#define XWAY_STP_UPD_FPI BIT(31)
54#define XWAY_STP_UPD_MASK (BIT(31) | BIT(30))
John Crispin935c5002011-03-30 09:27:56 +020055
John Crispin54f30062012-05-16 22:22:47 +020056/* let the adsl core drive the 2 LSBs */
57#define XWAY_STP_ADSL_SHIFT 24
58#define XWAY_STP_ADSL_MASK 0x3
John Crispin935c5002011-03-30 09:27:56 +020059
John Crispin54f30062012-05-16 22:22:47 +020060/* 2 groups of 3 bits can be driven by the phys */
61#define XWAY_STP_PHY_MASK 0x3
62#define XWAY_STP_PHY1_SHIFT 27
63#define XWAY_STP_PHY2_SHIFT 15
John Crispin935c5002011-03-30 09:27:56 +020064
John Crispin54f30062012-05-16 22:22:47 +020065/* STP has 3 groups of 8 bits */
66#define XWAY_STP_GROUP0 BIT(0)
67#define XWAY_STP_GROUP1 BIT(1)
68#define XWAY_STP_GROUP2 BIT(2)
69#define XWAY_STP_GROUP_MASK (0x7)
John Crispin935c5002011-03-30 09:27:56 +020070
John Crispin54f30062012-05-16 22:22:47 +020071/* Edge configuration bits */
72#define XWAY_STP_FALLING BIT(26)
73#define XWAY_STP_EDGE_MASK BIT(26)
John Crispin935c5002011-03-30 09:27:56 +020074
John Crispin54f30062012-05-16 22:22:47 +020075#define xway_stp_r32(m, reg) __raw_readl(m + reg)
76#define xway_stp_w32(m, val, reg) __raw_writel(val, m + reg)
77#define xway_stp_w32_mask(m, clear, set, reg) \
78 ltq_w32((ltq_r32(m + reg) & ~(clear)) | (set), \
79 m + reg)
80
81struct xway_stp {
82 struct gpio_chip gc;
83 void __iomem *virt;
84 u32 edge; /* rising or falling edge triggered shift register */
John Crispinc9e854c2012-07-11 16:33:43 +020085 u32 shadow; /* shadow the shift registers state */
John Crispin54f30062012-05-16 22:22:47 +020086 u8 groups; /* we can drive 1-3 groups of 8bit each */
87 u8 dsl; /* the 2 LSBs can be driven by the dsl core */
88 u8 phy1; /* 3 bits can be driven by phy1 */
89 u8 phy2; /* 3 bits can be driven by phy2 */
90 u8 reserved; /* mask out the hw driven bits in gpio_request */
John Crispin935c5002011-03-30 09:27:56 +020091};
92
John Crispin54f30062012-05-16 22:22:47 +020093/**
94 * xway_stp_set() - gpio_chip->set - set gpios.
95 * @gc: Pointer to gpio_chip device structure.
96 * @gpio: GPIO signal number.
97 * @val: Value to be written to specified signal.
98 *
99 * Set the shadow value and call ltq_ebu_apply.
100 */
101static void xway_stp_set(struct gpio_chip *gc, unsigned gpio, int val)
John Crispin935c5002011-03-30 09:27:56 +0200102{
John Crispin54f30062012-05-16 22:22:47 +0200103 struct xway_stp *chip =
104 container_of(gc, struct xway_stp, gc);
John Crispin935c5002011-03-30 09:27:56 +0200105
John Crispin54f30062012-05-16 22:22:47 +0200106 if (val)
107 chip->shadow |= BIT(gpio);
108 else
109 chip->shadow &= ~BIT(gpio);
110 xway_stp_w32(chip->virt, chip->shadow, XWAY_STP_CPU0);
111 xway_stp_w32_mask(chip->virt, 0, XWAY_STP_CON_SWU, XWAY_STP_CON0);
112}
John Crispin935c5002011-03-30 09:27:56 +0200113
John Crispin54f30062012-05-16 22:22:47 +0200114/**
115 * xway_stp_dir_out() - gpio_chip->dir_out - set gpio direction.
116 * @gc: Pointer to gpio_chip device structure.
117 * @gpio: GPIO signal number.
118 * @val: Value to be written to specified signal.
119 *
120 * Same as xway_stp_set, always returns 0.
121 */
122static int xway_stp_dir_out(struct gpio_chip *gc, unsigned gpio, int val)
123{
124 xway_stp_set(gc, gpio, val);
John Crispin935c5002011-03-30 09:27:56 +0200125
John Crispin935c5002011-03-30 09:27:56 +0200126 return 0;
127}
128
John Crispin54f30062012-05-16 22:22:47 +0200129/**
130 * xway_stp_request() - gpio_chip->request
131 * @gc: Pointer to gpio_chip device structure.
132 * @gpio: GPIO signal number.
133 *
134 * We mask out the HW driven pins
135 */
136static int xway_stp_request(struct gpio_chip *gc, unsigned gpio)
137{
138 struct xway_stp *chip =
139 container_of(gc, struct xway_stp, gc);
140
141 if ((gpio < 8) && (chip->reserved & BIT(gpio))) {
142 dev_err(gc->dev, "GPIO %d is driven by hardware\n", gpio);
143 return -ENODEV;
144 }
145
146 return 0;
147}
148
149/**
150 * xway_stp_hw_init() - Configure the STP unit and enable the clock gate
151 * @virt: pointer to the remapped register range
152 */
153static int xway_stp_hw_init(struct xway_stp *chip)
154{
155 /* sane defaults */
156 xway_stp_w32(chip->virt, 0, XWAY_STP_AR);
157 xway_stp_w32(chip->virt, 0, XWAY_STP_CPU0);
158 xway_stp_w32(chip->virt, 0, XWAY_STP_CPU1);
159 xway_stp_w32(chip->virt, XWAY_STP_CON_SWU, XWAY_STP_CON0);
160 xway_stp_w32(chip->virt, 0, XWAY_STP_CON1);
161
162 /* apply edge trigger settings for the shift register */
163 xway_stp_w32_mask(chip->virt, XWAY_STP_EDGE_MASK,
164 chip->edge, XWAY_STP_CON0);
165
166 /* apply led group settings */
167 xway_stp_w32_mask(chip->virt, XWAY_STP_GROUP_MASK,
168 chip->groups, XWAY_STP_CON1);
169
170 /* tell the hardware which pins are controlled by the dsl modem */
171 xway_stp_w32_mask(chip->virt,
172 XWAY_STP_ADSL_MASK << XWAY_STP_ADSL_SHIFT,
173 chip->dsl << XWAY_STP_ADSL_SHIFT,
174 XWAY_STP_CON0);
175
176 /* tell the hardware which pins are controlled by the phys */
177 xway_stp_w32_mask(chip->virt,
178 XWAY_STP_PHY_MASK << XWAY_STP_PHY1_SHIFT,
179 chip->phy1 << XWAY_STP_PHY1_SHIFT,
180 XWAY_STP_CON0);
181 xway_stp_w32_mask(chip->virt,
182 XWAY_STP_PHY_MASK << XWAY_STP_PHY2_SHIFT,
183 chip->phy2 << XWAY_STP_PHY2_SHIFT,
184 XWAY_STP_CON1);
185
186 /* mask out the hw driven bits in gpio_request */
187 chip->reserved = (chip->phy2 << 5) | (chip->phy1 << 2) | chip->dsl;
188
189 /*
190 * if we have pins that are driven by hw, we need to tell the stp what
191 * clock to use as a timer.
192 */
193 if (chip->reserved)
194 xway_stp_w32_mask(chip->virt, XWAY_STP_UPD_MASK,
195 XWAY_STP_UPD_FPI, XWAY_STP_CON1);
196
197 return 0;
198}
199
Bill Pemberton38363092012-11-19 13:22:34 -0500200static int xway_stp_probe(struct platform_device *pdev)
John Crispin935c5002011-03-30 09:27:56 +0200201{
202 struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
John Crispin54f30062012-05-16 22:22:47 +0200203 const __be32 *shadow, *groups, *dsl, *phy;
204 struct xway_stp *chip;
205 struct clk *clk;
John Crispin935c5002011-03-30 09:27:56 +0200206 int ret = 0;
207
John Crispin935c5002011-03-30 09:27:56 +0200208 if (!res) {
John Crispin54f30062012-05-16 22:22:47 +0200209 dev_err(&pdev->dev, "failed to request STP resource\n");
210 return -ENOENT;
John Crispin935c5002011-03-30 09:27:56 +0200211 }
John Crispin54f30062012-05-16 22:22:47 +0200212
213 chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
214 if (!chip)
215 return -ENOMEM;
216
217 chip->virt = devm_request_and_ioremap(&pdev->dev, res);
218 if (!chip->virt) {
John Crispin935c5002011-03-30 09:27:56 +0200219 dev_err(&pdev->dev, "failed to remap STP memory\n");
220 return -ENOMEM;
221 }
John Crispin54f30062012-05-16 22:22:47 +0200222 chip->gc.dev = &pdev->dev;
223 chip->gc.label = "stp-xway";
224 chip->gc.direction_output = xway_stp_dir_out;
225 chip->gc.set = xway_stp_set;
226 chip->gc.request = xway_stp_request;
227 chip->gc.base = -1;
228 chip->gc.owner = THIS_MODULE;
229
230 /* store the shadow value if one was passed by the devicetree */
231 shadow = of_get_property(pdev->dev.of_node, "lantiq,shadow", NULL);
232 if (shadow)
233 chip->shadow = be32_to_cpu(*shadow);
234
235 /* find out which gpio groups should be enabled */
236 groups = of_get_property(pdev->dev.of_node, "lantiq,groups", NULL);
237 if (groups)
238 chip->groups = be32_to_cpu(*groups) & XWAY_STP_GROUP_MASK;
239 else
240 chip->groups = XWAY_STP_GROUP0;
241 chip->gc.ngpio = fls(chip->groups) * 8;
242
243 /* find out which gpios are controlled by the dsl core */
244 dsl = of_get_property(pdev->dev.of_node, "lantiq,dsl", NULL);
245 if (dsl)
246 chip->dsl = be32_to_cpu(*dsl) & XWAY_STP_ADSL_MASK;
247
248 /* find out which gpios are controlled by the phys */
249 if (of_machine_is_compatible("lantiq,ar9") ||
250 of_machine_is_compatible("lantiq,gr9") ||
251 of_machine_is_compatible("lantiq,vr9")) {
252 phy = of_get_property(pdev->dev.of_node, "lantiq,phy1", NULL);
253 if (phy)
254 chip->phy1 = be32_to_cpu(*phy) & XWAY_STP_PHY_MASK;
255 phy = of_get_property(pdev->dev.of_node, "lantiq,phy2", NULL);
256 if (phy)
257 chip->phy2 = be32_to_cpu(*phy) & XWAY_STP_PHY_MASK;
258 }
259
260 /* check which edge trigger we should use, default to a falling edge */
261 if (!of_find_property(pdev->dev.of_node, "lantiq,rising", NULL))
262 chip->edge = XWAY_STP_FALLING;
263
264 clk = clk_get(&pdev->dev, NULL);
265 if (IS_ERR(clk)) {
266 dev_err(&pdev->dev, "Failed to get clock\n");
267 return PTR_ERR(clk);
268 }
269 clk_enable(clk);
270
271 ret = xway_stp_hw_init(chip);
John Crispin935c5002011-03-30 09:27:56 +0200272 if (!ret)
John Crispin54f30062012-05-16 22:22:47 +0200273 ret = gpiochip_add(&chip->gc);
274
275 if (!ret)
276 dev_info(&pdev->dev, "Init done\n");
John Crispin935c5002011-03-30 09:27:56 +0200277
278 return ret;
279}
280
John Crispin54f30062012-05-16 22:22:47 +0200281static const struct of_device_id xway_stp_match[] = {
282 { .compatible = "lantiq,gpio-stp-xway" },
283 {},
284};
285MODULE_DEVICE_TABLE(of, xway_stp_match);
286
287static struct platform_driver xway_stp_driver = {
288 .probe = xway_stp_probe,
John Crispin935c5002011-03-30 09:27:56 +0200289 .driver = {
John Crispin54f30062012-05-16 22:22:47 +0200290 .name = "gpio-stp-xway",
John Crispin935c5002011-03-30 09:27:56 +0200291 .owner = THIS_MODULE,
John Crispin54f30062012-05-16 22:22:47 +0200292 .of_match_table = xway_stp_match,
John Crispin935c5002011-03-30 09:27:56 +0200293 },
294};
295
John Crispin54f30062012-05-16 22:22:47 +0200296int __init xway_stp_init(void)
John Crispin935c5002011-03-30 09:27:56 +0200297{
John Crispin54f30062012-05-16 22:22:47 +0200298 return platform_driver_register(&xway_stp_driver);
John Crispin935c5002011-03-30 09:27:56 +0200299}
300
John Crispin54f30062012-05-16 22:22:47 +0200301subsys_initcall(xway_stp_init);