blob: 92cc2efb25d70e00d33e3b1a555f6b8505348a10 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* -*-linux-c-*-
2
3 * vendor-specific code for SCSI CD-ROM's goes here.
4 *
5 * This is needed becauce most of the new features (multisession and
6 * the like) are too new to be included into the SCSI-II standard (to
7 * be exact: there is'nt anything in my draft copy).
8 *
9 * Aug 1997: Ha! Got a SCSI-3 cdrom spec across my fingers. SCSI-3 does
10 * multisession using the READ TOC command (like SONY).
11 *
12 * Rearranged stuff here: SCSI-3 is included allways, support
13 * for NEC/TOSHIBA/HP commands is optional.
14 *
15 * Gerd Knorr <kraxel@cs.tu-berlin.de>
16 *
17 * --------------------------------------------------------------------------
18 *
19 * support for XA/multisession-CD's
20 *
21 * - NEC: Detection and support of multisession CD's.
22 *
23 * - TOSHIBA: Detection and support of multisession CD's.
24 * Some XA-Sector tweaking, required for older drives.
25 *
26 * - SONY: Detection and support of multisession CD's.
27 * added by Thomas Quinot <thomas@cuivre.freenix.fr>
28 *
29 * - PIONEER, HITACHI, PLEXTOR, MATSHITA, TEAC, PHILIPS: known to
30 * work with SONY (SCSI3 now) code.
31 *
32 * - HP: Much like SONY, but a little different... (Thomas)
33 * HP-Writers only ??? Maybe other CD-Writers work with this too ?
34 * HP 6020 writers now supported.
35 */
36
Linus Torvalds1da177e2005-04-16 15:20:36 -070037#include <linux/cdrom.h>
38#include <linux/errno.h>
39#include <linux/string.h>
40#include <linux/bcd.h>
41#include <linux/blkdev.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090042#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070043
44#include <scsi/scsi.h>
45#include <scsi/scsi_cmnd.h>
46#include <scsi/scsi_device.h>
47#include <scsi/scsi_host.h>
48#include <scsi/scsi_ioctl.h>
49
50#include "sr.h"
51
52#if 0
53#define DEBUG
54#endif
55
56/* here are some constants to sort the vendors into groups */
57
58#define VENDOR_SCSI3 1 /* default: scsi-3 mmc */
59
60#define VENDOR_NEC 2
61#define VENDOR_TOSHIBA 3
62#define VENDOR_WRITER 4 /* pre-scsi3 writers */
63
64#define VENDOR_TIMEOUT 30*HZ
65
66void sr_vendor_init(Scsi_CD *cd)
67{
68#ifndef CONFIG_BLK_DEV_SR_VENDOR
69 cd->vendor = VENDOR_SCSI3;
70#else
Matthew Wilcox7b32b8e2005-12-16 21:11:37 -070071 const char *vendor = cd->device->vendor;
72 const char *model = cd->device->model;
Linus Torvalds1da177e2005-04-16 15:20:36 -070073
74 /* default */
75 cd->vendor = VENDOR_SCSI3;
76 if (cd->readcd_known)
77 /* this is true for scsi3/mmc drives - no more checks */
78 return;
79
80 if (cd->device->type == TYPE_WORM) {
81 cd->vendor = VENDOR_WRITER;
82
83 } else if (!strncmp(vendor, "NEC", 3)) {
84 cd->vendor = VENDOR_NEC;
85 if (!strncmp(model, "CD-ROM DRIVE:25", 15) ||
86 !strncmp(model, "CD-ROM DRIVE:36", 15) ||
87 !strncmp(model, "CD-ROM DRIVE:83", 15) ||
88 !strncmp(model, "CD-ROM DRIVE:84 ", 16)
89#if 0
90 /* my NEC 3x returns the read-raw data if a read-raw
91 is followed by a read for the same sector - aeb */
92 || !strncmp(model, "CD-ROM DRIVE:500", 16)
93#endif
94 )
95 /* these can't handle multisession, may hang */
96 cd->cdi.mask |= CDC_MULTI_SESSION;
97
98 } else if (!strncmp(vendor, "TOSHIBA", 7)) {
99 cd->vendor = VENDOR_TOSHIBA;
100
101 }
102#endif
103}
104
105
106/* small handy function for switching block length using MODE SELECT,
107 * used by sr_read_sector() */
108
109int sr_set_blocklength(Scsi_CD *cd, int blocklength)
110{
111 unsigned char *buffer; /* the buffer for the ioctl */
112 struct packet_command cgc;
113 struct ccs_modesel_head *modesel;
114 int rc, density = 0;
115
116#ifdef CONFIG_BLK_DEV_SR_VENDOR
117 if (cd->vendor == VENDOR_TOSHIBA)
118 density = (blocklength > 2048) ? 0x81 : 0x83;
119#endif
120
Robert P. J. Day5cbded52006-12-13 00:35:56 -0800121 buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700122 if (!buffer)
123 return -ENOMEM;
124
125#ifdef DEBUG
126 printk("%s: MODE SELECT 0x%x/%d\n", cd->cdi.name, density, blocklength);
127#endif
128 memset(&cgc, 0, sizeof(struct packet_command));
129 cgc.cmd[0] = MODE_SELECT;
130 cgc.cmd[1] = (1 << 4);
131 cgc.cmd[4] = 12;
132 modesel = (struct ccs_modesel_head *) buffer;
133 memset(modesel, 0, sizeof(*modesel));
134 modesel->block_desc_length = 0x08;
135 modesel->density = density;
136 modesel->block_length_med = (blocklength >> 8) & 0xff;
137 modesel->block_length_lo = blocklength & 0xff;
138 cgc.buffer = buffer;
139 cgc.buflen = sizeof(*modesel);
140 cgc.data_direction = DMA_TO_DEVICE;
141 cgc.timeout = VENDOR_TIMEOUT;
142 if (0 == (rc = sr_do_ioctl(cd, &cgc))) {
143 cd->device->sector_size = blocklength;
144 }
145#ifdef DEBUG
146 else
147 printk("%s: switching blocklength to %d bytes failed\n",
148 cd->cdi.name, blocklength);
149#endif
150 kfree(buffer);
151 return rc;
152}
153
154/* This function gets called after a media change. Checks if the CD is
155 multisession, asks for offset etc. */
156
157int sr_cd_check(struct cdrom_device_info *cdi)
158{
159 Scsi_CD *cd = cdi->handle;
160 unsigned long sector;
161 unsigned char *buffer; /* the buffer for the ioctl */
162 struct packet_command cgc;
163 int rc, no_multi;
164
165 if (cd->cdi.mask & CDC_MULTI_SESSION)
166 return 0;
167
Robert P. J. Day5cbded52006-12-13 00:35:56 -0800168 buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169 if (!buffer)
170 return -ENOMEM;
171
172 sector = 0; /* the multisession sector offset goes here */
173 no_multi = 0; /* flag: the drive can't handle multisession */
174 rc = 0;
175
176 memset(&cgc, 0, sizeof(struct packet_command));
177
178 switch (cd->vendor) {
179
180 case VENDOR_SCSI3:
181 cgc.cmd[0] = READ_TOC;
182 cgc.cmd[8] = 12;
183 cgc.cmd[9] = 0x40;
184 cgc.buffer = buffer;
185 cgc.buflen = 12;
186 cgc.quiet = 1;
187 cgc.data_direction = DMA_FROM_DEVICE;
188 cgc.timeout = VENDOR_TIMEOUT;
189 rc = sr_do_ioctl(cd, &cgc);
190 if (rc != 0)
191 break;
192 if ((buffer[0] << 8) + buffer[1] < 0x0a) {
193 printk(KERN_INFO "%s: Hmm, seems the drive "
194 "doesn't support multisession CD's\n", cd->cdi.name);
195 no_multi = 1;
196 break;
197 }
198 sector = buffer[11] + (buffer[10] << 8) +
199 (buffer[9] << 16) + (buffer[8] << 24);
200 if (buffer[6] <= 1) {
201 /* ignore sector offsets from first track */
202 sector = 0;
203 }
204 break;
205
206#ifdef CONFIG_BLK_DEV_SR_VENDOR
207 case VENDOR_NEC:{
208 unsigned long min, sec, frame;
209 cgc.cmd[0] = 0xde;
210 cgc.cmd[1] = 0x03;
211 cgc.cmd[2] = 0xb0;
212 cgc.buffer = buffer;
213 cgc.buflen = 0x16;
214 cgc.quiet = 1;
215 cgc.data_direction = DMA_FROM_DEVICE;
216 cgc.timeout = VENDOR_TIMEOUT;
217 rc = sr_do_ioctl(cd, &cgc);
218 if (rc != 0)
219 break;
220 if (buffer[14] != 0 && buffer[14] != 0xb0) {
221 printk(KERN_INFO "%s: Hmm, seems the cdrom "
222 "doesn't support multisession CD's\n",
223 cd->cdi.name);
224 no_multi = 1;
225 break;
226 }
Adrian Bunk2cee5df2008-10-18 20:28:47 -0700227 min = bcd2bin(buffer[15]);
228 sec = bcd2bin(buffer[16]);
229 frame = bcd2bin(buffer[17]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700230 sector = min * CD_SECS * CD_FRAMES + sec * CD_FRAMES + frame;
231 break;
232 }
233
234 case VENDOR_TOSHIBA:{
235 unsigned long min, sec, frame;
236
237 /* we request some disc information (is it a XA-CD ?,
238 * where starts the last session ?) */
239 cgc.cmd[0] = 0xc7;
240 cgc.cmd[1] = 0x03;
241 cgc.buffer = buffer;
242 cgc.buflen = 4;
243 cgc.quiet = 1;
244 cgc.data_direction = DMA_FROM_DEVICE;
245 cgc.timeout = VENDOR_TIMEOUT;
246 rc = sr_do_ioctl(cd, &cgc);
247 if (rc == -EINVAL) {
248 printk(KERN_INFO "%s: Hmm, seems the drive "
249 "doesn't support multisession CD's\n",
250 cd->cdi.name);
251 no_multi = 1;
252 break;
253 }
254 if (rc != 0)
255 break;
Adrian Bunk2cee5df2008-10-18 20:28:47 -0700256 min = bcd2bin(buffer[1]);
257 sec = bcd2bin(buffer[2]);
258 frame = bcd2bin(buffer[3]);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700259 sector = min * CD_SECS * CD_FRAMES + sec * CD_FRAMES + frame;
260 if (sector)
261 sector -= CD_MSF_OFFSET;
262 sr_set_blocklength(cd, 2048);
263 break;
264 }
265
266 case VENDOR_WRITER:
267 cgc.cmd[0] = READ_TOC;
268 cgc.cmd[8] = 0x04;
269 cgc.cmd[9] = 0x40;
270 cgc.buffer = buffer;
271 cgc.buflen = 0x04;
272 cgc.quiet = 1;
273 cgc.data_direction = DMA_FROM_DEVICE;
274 cgc.timeout = VENDOR_TIMEOUT;
275 rc = sr_do_ioctl(cd, &cgc);
276 if (rc != 0) {
277 break;
278 }
279 if ((rc = buffer[2]) == 0) {
280 printk(KERN_WARNING
281 "%s: No finished session\n", cd->cdi.name);
282 break;
283 }
284 cgc.cmd[0] = READ_TOC; /* Read TOC */
285 cgc.cmd[6] = rc & 0x7f; /* number of last session */
286 cgc.cmd[8] = 0x0c;
287 cgc.cmd[9] = 0x40;
288 cgc.buffer = buffer;
289 cgc.buflen = 12;
290 cgc.quiet = 1;
291 cgc.data_direction = DMA_FROM_DEVICE;
292 cgc.timeout = VENDOR_TIMEOUT;
293 rc = sr_do_ioctl(cd, &cgc);
294 if (rc != 0) {
295 break;
296 }
297 sector = buffer[11] + (buffer[10] << 8) +
298 (buffer[9] << 16) + (buffer[8] << 24);
299 break;
300#endif /* CONFIG_BLK_DEV_SR_VENDOR */
301
302 default:
303 /* should not happen */
304 printk(KERN_WARNING
305 "%s: unknown vendor code (%i), not initialized ?\n",
306 cd->cdi.name, cd->vendor);
307 sector = 0;
308 no_multi = 1;
309 break;
310 }
311 cd->ms_offset = sector;
312 cd->xa_flag = 0;
313 if (CDS_AUDIO != sr_disk_status(cdi) && 1 == sr_is_xa(cd))
314 cd->xa_flag = 1;
315
316 if (2048 != cd->device->sector_size) {
317 sr_set_blocklength(cd, 2048);
318 }
319 if (no_multi)
320 cdi->mask |= CDC_MULTI_SESSION;
321
322#ifdef DEBUG
323 if (sector)
324 printk(KERN_DEBUG "%s: multisession offset=%lu\n",
325 cd->cdi.name, sector);
326#endif
327 kfree(buffer);
328 return rc;
329}