blob: 5468fc70dbf8d06432ce1cc1e8b2ef20c96a5a72 [file] [log] [blame]
Beniamino Galvanic3e4bc542014-11-22 16:21:41 +01001/*
2 * Driver for Amlogic Meson SPI flash controller (SPIFC)
3 *
4 * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * version 2 as published by the Free Software Foundation.
9 *
10 * You should have received a copy of the GNU General Public License
11 * along with this program. If not, see <http://www.gnu.org/licenses/>.
12 */
13
14#include <linux/clk.h>
15#include <linux/delay.h>
16#include <linux/device.h>
17#include <linux/io.h>
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/of.h>
21#include <linux/platform_device.h>
22#include <linux/pm_runtime.h>
23#include <linux/regmap.h>
24#include <linux/spi/spi.h>
25#include <linux/types.h>
26
27/* register map */
28#define REG_CMD 0x00
29#define REG_ADDR 0x04
30#define REG_CTRL 0x08
31#define REG_CTRL1 0x0c
32#define REG_STATUS 0x10
33#define REG_CTRL2 0x14
34#define REG_CLOCK 0x18
35#define REG_USER 0x1c
36#define REG_USER1 0x20
37#define REG_USER2 0x24
38#define REG_USER3 0x28
39#define REG_USER4 0x2c
40#define REG_SLAVE 0x30
41#define REG_SLAVE1 0x34
42#define REG_SLAVE2 0x38
43#define REG_SLAVE3 0x3c
44#define REG_C0 0x40
45#define REG_B8 0x60
46#define REG_MAX 0x7c
47
48/* register fields */
49#define CMD_USER BIT(18)
50#define CTRL_ENABLE_AHB BIT(17)
51#define CLOCK_SOURCE BIT(31)
52#define CLOCK_DIV_SHIFT 12
53#define CLOCK_DIV_MASK (0x3f << CLOCK_DIV_SHIFT)
54#define CLOCK_CNT_HIGH_SHIFT 6
55#define CLOCK_CNT_HIGH_MASK (0x3f << CLOCK_CNT_HIGH_SHIFT)
56#define CLOCK_CNT_LOW_SHIFT 0
57#define CLOCK_CNT_LOW_MASK (0x3f << CLOCK_CNT_LOW_SHIFT)
58#define USER_DIN_EN_MS BIT(0)
59#define USER_CMP_MODE BIT(2)
60#define USER_UC_DOUT_SEL BIT(27)
61#define USER_UC_DIN_SEL BIT(28)
62#define USER_UC_MASK ((BIT(5) - 1) << 27)
63#define USER1_BN_UC_DOUT_SHIFT 17
64#define USER1_BN_UC_DOUT_MASK (0xff << 16)
65#define USER1_BN_UC_DIN_SHIFT 8
66#define USER1_BN_UC_DIN_MASK (0xff << 8)
67#define USER4_CS_ACT BIT(30)
68#define SLAVE_TRST_DONE BIT(4)
69#define SLAVE_OP_MODE BIT(30)
70#define SLAVE_SW_RST BIT(31)
71
72#define SPIFC_BUFFER_SIZE 64
73
74/**
75 * struct meson_spifc
76 * @master: the SPI master
77 * @regmap: regmap for device registers
78 * @clk: input clock of the built-in baud rate generator
79 * @device: the device structure
80 */
81struct meson_spifc {
82 struct spi_master *master;
83 struct regmap *regmap;
84 struct clk *clk;
85 struct device *dev;
86};
87
Krzysztof Kozlowski9caf5062015-01-05 10:07:01 +010088static const struct regmap_config spifc_regmap_config = {
Beniamino Galvanic3e4bc542014-11-22 16:21:41 +010089 .reg_bits = 32,
90 .val_bits = 32,
91 .reg_stride = 4,
92 .max_register = REG_MAX,
93};
94
95/**
96 * meson_spifc_wait_ready() - wait for the current operation to terminate
97 * @spifc: the Meson SPI device
98 * Return: 0 on success, a negative value on error
99 */
100static int meson_spifc_wait_ready(struct meson_spifc *spifc)
101{
102 unsigned long deadline = jiffies + msecs_to_jiffies(5);
103 u32 data;
104
105 do {
106 regmap_read(spifc->regmap, REG_SLAVE, &data);
107 if (data & SLAVE_TRST_DONE)
108 return 0;
109 cond_resched();
110 } while (!time_after(jiffies, deadline));
111
112 return -ETIMEDOUT;
113}
114
115/**
116 * meson_spifc_drain_buffer() - copy data from device buffer to memory
117 * @spifc: the Meson SPI device
118 * @buf: the destination buffer
119 * @len: number of bytes to copy
120 */
121static void meson_spifc_drain_buffer(struct meson_spifc *spifc, u8 *buf,
122 int len)
123{
124 u32 data;
125 int i = 0;
126
127 while (i < len) {
128 regmap_read(spifc->regmap, REG_C0 + i, &data);
129
130 if (len - i >= 4) {
131 *((u32 *)buf) = data;
132 buf += 4;
133 } else {
134 memcpy(buf, &data, len - i);
135 break;
136 }
137 i += 4;
138 }
139}
140
141/**
142 * meson_spifc_fill_buffer() - copy data from memory to device buffer
143 * @spifc: the Meson SPI device
144 * @buf: the source buffer
145 * @len: number of bytes to copy
146 */
147static void meson_spifc_fill_buffer(struct meson_spifc *spifc, const u8 *buf,
148 int len)
149{
150 u32 data;
151 int i = 0;
152
153 while (i < len) {
154 if (len - i >= 4)
155 data = *(u32 *)buf;
156 else
157 memcpy(&data, buf, len - i);
158
159 regmap_write(spifc->regmap, REG_C0 + i, data);
160
161 buf += 4;
162 i += 4;
163 }
164}
165
166/**
167 * meson_spifc_setup_speed() - program the clock divider
168 * @spifc: the Meson SPI device
169 * @speed: desired speed in Hz
170 */
kbuild test robot008c2a22014-11-25 08:36:12 +0800171static void meson_spifc_setup_speed(struct meson_spifc *spifc, u32 speed)
Beniamino Galvanic3e4bc542014-11-22 16:21:41 +0100172{
173 unsigned long parent, value;
174 int n;
175
176 parent = clk_get_rate(spifc->clk);
177 n = max_t(int, parent / speed - 1, 1);
178
179 dev_dbg(spifc->dev, "parent %lu, speed %u, n %d\n", parent,
180 speed, n);
181
182 value = (n << CLOCK_DIV_SHIFT) & CLOCK_DIV_MASK;
183 value |= (n << CLOCK_CNT_LOW_SHIFT) & CLOCK_CNT_LOW_MASK;
184 value |= (((n + 1) / 2 - 1) << CLOCK_CNT_HIGH_SHIFT) &
185 CLOCK_CNT_HIGH_MASK;
186
187 regmap_write(spifc->regmap, REG_CLOCK, value);
188}
189
190/**
191 * meson_spifc_txrx() - transfer a chunk of data
192 * @spifc: the Meson SPI device
193 * @xfer: the current SPI transfer
194 * @offset: offset of the data to transfer
195 * @len: length of the data to transfer
196 * @last_xfer: whether this is the last transfer of the message
197 * @last_chunk: whether this is the last chunk of the transfer
198 * Return: 0 on success, a negative value on error
199 */
200static int meson_spifc_txrx(struct meson_spifc *spifc,
201 struct spi_transfer *xfer,
202 int offset, int len, bool last_xfer,
203 bool last_chunk)
204{
205 bool keep_cs = true;
206 int ret;
207
208 if (xfer->tx_buf)
209 meson_spifc_fill_buffer(spifc, xfer->tx_buf + offset, len);
210
211 /* enable DOUT stage */
212 regmap_update_bits(spifc->regmap, REG_USER, USER_UC_MASK,
213 USER_UC_DOUT_SEL);
214 regmap_write(spifc->regmap, REG_USER1,
215 (8 * len - 1) << USER1_BN_UC_DOUT_SHIFT);
216
217 /* enable data input during DOUT */
218 regmap_update_bits(spifc->regmap, REG_USER, USER_DIN_EN_MS,
219 USER_DIN_EN_MS);
220
221 if (last_chunk) {
222 if (last_xfer)
223 keep_cs = xfer->cs_change;
224 else
225 keep_cs = !xfer->cs_change;
226 }
227
228 regmap_update_bits(spifc->regmap, REG_USER4, USER4_CS_ACT,
229 keep_cs ? USER4_CS_ACT : 0);
230
231 /* clear transition done bit */
232 regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_TRST_DONE, 0);
233 /* start transfer */
234 regmap_update_bits(spifc->regmap, REG_CMD, CMD_USER, CMD_USER);
235
236 ret = meson_spifc_wait_ready(spifc);
237
238 if (!ret && xfer->rx_buf)
239 meson_spifc_drain_buffer(spifc, xfer->rx_buf + offset, len);
240
241 return ret;
242}
243
244/**
245 * meson_spifc_transfer_one() - perform a single transfer
246 * @master: the SPI master
247 * @spi: the SPI device
248 * @xfer: the current SPI transfer
249 * Return: 0 on success, a negative value on error
250 */
251static int meson_spifc_transfer_one(struct spi_master *master,
252 struct spi_device *spi,
253 struct spi_transfer *xfer)
254{
255 struct meson_spifc *spifc = spi_master_get_devdata(master);
256 int len, done = 0, ret = 0;
257
258 meson_spifc_setup_speed(spifc, xfer->speed_hz);
259
260 regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB, 0);
261
262 while (done < xfer->len && !ret) {
263 len = min_t(int, xfer->len - done, SPIFC_BUFFER_SIZE);
264 ret = meson_spifc_txrx(spifc, xfer, done, len,
265 spi_transfer_is_last(master, xfer),
266 done + len >= xfer->len);
267 done += len;
268 }
269
270 regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB,
271 CTRL_ENABLE_AHB);
272
273 return ret;
274}
275
276/**
277 * meson_spifc_hw_init() - reset and initialize the SPI controller
278 * @spifc: the Meson SPI device
279 */
280static void meson_spifc_hw_init(struct meson_spifc *spifc)
281{
282 /* reset device */
283 regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_SW_RST,
284 SLAVE_SW_RST);
285 /* disable compatible mode */
286 regmap_update_bits(spifc->regmap, REG_USER, USER_CMP_MODE, 0);
287 /* set master mode */
288 regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_OP_MODE, 0);
289}
290
291static int meson_spifc_probe(struct platform_device *pdev)
292{
293 struct spi_master *master;
294 struct meson_spifc *spifc;
295 struct resource *res;
296 void __iomem *base;
297 unsigned int rate;
298 int ret = 0;
299
300 master = spi_alloc_master(&pdev->dev, sizeof(struct meson_spifc));
301 if (!master)
302 return -ENOMEM;
303
304 platform_set_drvdata(pdev, master);
305
306 spifc = spi_master_get_devdata(master);
307 spifc->dev = &pdev->dev;
308
309 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
310 base = devm_ioremap_resource(spifc->dev, res);
311 if (IS_ERR(base)) {
312 ret = PTR_ERR(base);
313 goto out_err;
314 }
315
316 spifc->regmap = devm_regmap_init_mmio(spifc->dev, base,
317 &spifc_regmap_config);
318 if (IS_ERR(spifc->regmap)) {
319 ret = PTR_ERR(spifc->regmap);
320 goto out_err;
321 }
322
323 spifc->clk = devm_clk_get(spifc->dev, NULL);
324 if (IS_ERR(spifc->clk)) {
325 dev_err(spifc->dev, "missing clock\n");
326 ret = PTR_ERR(spifc->clk);
327 goto out_err;
328 }
329
330 ret = clk_prepare_enable(spifc->clk);
331 if (ret) {
332 dev_err(spifc->dev, "can't prepare clock\n");
333 goto out_err;
334 }
335
336 rate = clk_get_rate(spifc->clk);
337
338 master->num_chipselect = 1;
339 master->dev.of_node = pdev->dev.of_node;
340 master->bits_per_word_mask = SPI_BPW_MASK(8);
341 master->auto_runtime_pm = true;
342 master->transfer_one = meson_spifc_transfer_one;
343 master->min_speed_hz = rate >> 6;
344 master->max_speed_hz = rate >> 1;
345
346 meson_spifc_hw_init(spifc);
347
348 pm_runtime_set_active(spifc->dev);
349 pm_runtime_enable(spifc->dev);
350
351 ret = devm_spi_register_master(spifc->dev, master);
352 if (ret) {
353 dev_err(spifc->dev, "failed to register spi master\n");
354 goto out_clk;
355 }
356
357 return 0;
358out_clk:
359 clk_disable_unprepare(spifc->clk);
360out_err:
361 spi_master_put(master);
362 return ret;
363}
364
365static int meson_spifc_remove(struct platform_device *pdev)
366{
367 struct spi_master *master = platform_get_drvdata(pdev);
368 struct meson_spifc *spifc = spi_master_get_devdata(master);
369
370 pm_runtime_get_sync(&pdev->dev);
371 clk_disable_unprepare(spifc->clk);
372 pm_runtime_disable(&pdev->dev);
373
374 return 0;
375}
376
377#ifdef CONFIG_PM_SLEEP
378static int meson_spifc_suspend(struct device *dev)
379{
380 struct spi_master *master = dev_get_drvdata(dev);
381 struct meson_spifc *spifc = spi_master_get_devdata(master);
382 int ret;
383
384 ret = spi_master_suspend(master);
385 if (ret)
386 return ret;
387
388 if (!pm_runtime_suspended(dev))
389 clk_disable_unprepare(spifc->clk);
390
391 return 0;
392}
393
394static int meson_spifc_resume(struct device *dev)
395{
396 struct spi_master *master = dev_get_drvdata(dev);
397 struct meson_spifc *spifc = spi_master_get_devdata(master);
398 int ret;
399
400 if (!pm_runtime_suspended(dev)) {
401 ret = clk_prepare_enable(spifc->clk);
402 if (ret)
403 return ret;
404 }
405
406 meson_spifc_hw_init(spifc);
407
408 ret = spi_master_resume(master);
409 if (ret)
410 clk_disable_unprepare(spifc->clk);
411
412 return ret;
413}
414#endif /* CONFIG_PM_SLEEP */
415
Rafael J. Wysocki47164fd2014-12-19 15:25:31 +0100416#ifdef CONFIG_PM
Beniamino Galvanic3e4bc542014-11-22 16:21:41 +0100417static int meson_spifc_runtime_suspend(struct device *dev)
418{
419 struct spi_master *master = dev_get_drvdata(dev);
420 struct meson_spifc *spifc = spi_master_get_devdata(master);
421
422 clk_disable_unprepare(spifc->clk);
423
424 return 0;
425}
426
427static int meson_spifc_runtime_resume(struct device *dev)
428{
429 struct spi_master *master = dev_get_drvdata(dev);
430 struct meson_spifc *spifc = spi_master_get_devdata(master);
431
432 return clk_prepare_enable(spifc->clk);
433}
Rafael J. Wysocki47164fd2014-12-19 15:25:31 +0100434#endif /* CONFIG_PM */
Beniamino Galvanic3e4bc542014-11-22 16:21:41 +0100435
436static const struct dev_pm_ops meson_spifc_pm_ops = {
437 SET_SYSTEM_SLEEP_PM_OPS(meson_spifc_suspend, meson_spifc_resume)
438 SET_RUNTIME_PM_OPS(meson_spifc_runtime_suspend,
439 meson_spifc_runtime_resume,
440 NULL)
441};
442
443static const struct of_device_id meson_spifc_dt_match[] = {
444 { .compatible = "amlogic,meson6-spifc", },
445 { },
446};
447
448static struct platform_driver meson_spifc_driver = {
449 .probe = meson_spifc_probe,
450 .remove = meson_spifc_remove,
451 .driver = {
452 .name = "meson-spifc",
453 .of_match_table = of_match_ptr(meson_spifc_dt_match),
454 .pm = &meson_spifc_pm_ops,
455 },
456};
457
458module_platform_driver(meson_spifc_driver);
459
460MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
461MODULE_DESCRIPTION("Amlogic Meson SPIFC driver");
462MODULE_LICENSE("GPL v2");