blob: 180ea899a48afcf76586f24cf1a68cca5438f098 [file] [log] [blame]
Sascha Haueraf614ba2006-06-19 15:29:44 +01001/*
2 * arch/arm/mach-netx/nxdb500.c
3 *
4 * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2
8 * as published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 */
19
20#include <linux/dma-mapping.h>
21#include <linux/init.h>
22#include <linux/interrupt.h>
23#include <linux/mtd/plat-ram.h>
24#include <linux/platform_device.h>
25#include <linux/amba/bus.h>
26#include <linux/amba/clcd.h>
27
Russell Kinga09e64f2008-08-05 16:14:15 +010028#include <mach/hardware.h>
Sascha Haueraf614ba2006-06-19 15:29:44 +010029#include <asm/mach-types.h>
30#include <asm/mach/arch.h>
Jamie Iles14f127ba2011-09-27 20:22:21 +010031#include <asm/hardware/vic.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010032#include <mach/netx-regs.h>
33#include <mach/eth.h>
Sascha Haueraf614ba2006-06-19 15:29:44 +010034
35#include "generic.h"
36#include "fb.h"
37
38static struct clcd_panel qvga = {
39 .mode = {
40 .name = "QVGA",
41 .refresh = 60,
42 .xres = 240,
43 .yres = 320,
44 .pixclock = 187617,
45 .left_margin = 6,
46 .right_margin = 26,
47 .upper_margin = 0,
48 .lower_margin = 6,
49 .hsync_len = 6,
50 .vsync_len = 1,
51 .sync = 0,
52 .vmode = FB_VMODE_NONINTERLACED,
53 },
54 .width = -1,
55 .height = -1,
56 .tim2 = 16,
57 .cntl = CNTL_LCDTFT | CNTL_BGR,
58 .bpp = 16,
59 .grayscale = 0,
60};
61
62static inline int nxdb500_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
63{
64 var->green.length = 5;
65 var->green.msb_right = 0;
66
67 return clcdfb_check(fb, var);
68}
69
70static int nxdb500_clcd_setup(struct clcd_fb *fb)
71{
72 unsigned int val;
73
74 fb->fb.var.green.length = 5;
75 fb->fb.var.green.msb_right = 0;
76
77 /* enable asic control */
78 val = readl(NETX_SYSTEM_IOC_ACCESS_KEY);
79 writel(val, NETX_SYSTEM_IOC_ACCESS_KEY);
80
81 writel(3, NETX_SYSTEM_IOC_CR);
82
83 val = readl(NETX_PIO_OUTPIO);
84 writel(val | 1, NETX_PIO_OUTPIO);
85
86 val = readl(NETX_PIO_OEPIO);
87 writel(val | 1, NETX_PIO_OEPIO);
88 return netx_clcd_setup(fb);
89}
90
91static struct clcd_board clcd_data = {
92 .name = "netX",
93 .check = nxdb500_check,
94 .decode = clcdfb_decode,
95 .enable = netx_clcd_enable,
96 .setup = nxdb500_clcd_setup,
97 .mmap = netx_clcd_mmap,
98 .remove = netx_clcd_remove,
99};
100
101static struct netxeth_platform_data eth0_platform_data = {
102 .xcno = 0,
103};
104
105static struct platform_device netx_eth0_device = {
106 .name = "netx-eth",
107 .id = 0,
108 .num_resources = 0,
109 .resource = NULL,
110 .dev = {
111 .platform_data = &eth0_platform_data,
112 }
113};
114
115static struct netxeth_platform_data eth1_platform_data = {
116 .xcno = 1,
117};
118
119static struct platform_device netx_eth1_device = {
120 .name = "netx-eth",
121 .id = 1,
122 .num_resources = 0,
123 .resource = NULL,
124 .dev = {
125 .platform_data = &eth1_platform_data,
126 }
127};
128
129static struct resource netx_uart0_resources[] = {
130 [0] = {
131 .start = 0x00100A00,
132 .end = 0x00100A3F,
133 .flags = IORESOURCE_MEM,
134 },
135 [1] = {
136 .start = (NETX_IRQ_UART0),
137 .end = (NETX_IRQ_UART0),
138 .flags = IORESOURCE_IRQ,
139 },
140};
141
142static struct platform_device netx_uart0_device = {
143 .name = "netx-uart",
144 .id = 0,
145 .num_resources = ARRAY_SIZE(netx_uart0_resources),
146 .resource = netx_uart0_resources,
147};
148
149static struct resource netx_uart1_resources[] = {
150 [0] = {
151 .start = 0x00100A40,
152 .end = 0x00100A7F,
153 .flags = IORESOURCE_MEM,
154 },
155 [1] = {
156 .start = (NETX_IRQ_UART1),
157 .end = (NETX_IRQ_UART1),
158 .flags = IORESOURCE_IRQ,
159 },
160};
161
162static struct platform_device netx_uart1_device = {
163 .name = "netx-uart",
164 .id = 1,
165 .num_resources = ARRAY_SIZE(netx_uart1_resources),
166 .resource = netx_uart1_resources,
167};
168
169static struct resource netx_uart2_resources[] = {
170 [0] = {
171 .start = 0x00100A80,
172 .end = 0x00100ABF,
173 .flags = IORESOURCE_MEM,
174 },
175 [1] = {
176 .start = (NETX_IRQ_UART2),
177 .end = (NETX_IRQ_UART2),
178 .flags = IORESOURCE_IRQ,
179 },
180};
181
182static struct platform_device netx_uart2_device = {
183 .name = "netx-uart",
184 .id = 2,
185 .num_resources = ARRAY_SIZE(netx_uart2_resources),
186 .resource = netx_uart2_resources,
187};
188
189static struct platform_device *devices[] __initdata = {
190 &netx_eth0_device,
191 &netx_eth1_device,
192 &netx_uart0_device,
193 &netx_uart1_device,
194 &netx_uart2_device,
195};
196
197static void __init nxdb500_init(void)
198{
199 netx_fb_init(&clcd_data, &qvga);
200 platform_add_devices(devices, ARRAY_SIZE(devices));
201}
202
203MACHINE_START(NXDB500, "Hilscher nxdb500")
Nicolas Pitreb11fd422011-07-05 22:38:14 -0400204 .atag_offset = 0x100,
Sascha Haueraf614ba2006-06-19 15:29:44 +0100205 .map_io = netx_map_io,
206 .init_irq = netx_init_irq,
Jamie Iles14f127ba2011-09-27 20:22:21 +0100207 .handle_irq = vic_handle_irq,
Sascha Haueraf614ba2006-06-19 15:29:44 +0100208 .timer = &netx_timer,
209 .init_machine = nxdb500_init,
Russell King8fb06b12011-11-11 15:12:17 +0000210 .restart = netx_restart,
Sascha Haueraf614ba2006-06-19 15:29:44 +0100211MACHINE_END