Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Renesas USB driver |
| 3 | * |
| 4 | * Copyright (C) 2011 Renesas Solutions Corp. |
| 5 | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| 6 | * |
| 7 | * This program is distributed in the hope that it will be useful, |
| 8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 10 | * GNU General Public License for more details. |
| 11 | * |
| 12 | * You should have received a copy of the GNU General Public License |
| 13 | * along with this program; if not, write to the Free Software |
| 14 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 15 | * |
| 16 | */ |
| 17 | #include <linux/io.h> |
| 18 | #include <linux/list.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | #include <linux/slab.h> |
| 22 | #include <linux/usb.h> |
| 23 | #include <linux/usb/hcd.h> |
| 24 | #include "common.h" |
| 25 | |
| 26 | /* |
| 27 | *** HARDWARE LIMITATION *** |
| 28 | * |
| 29 | * 1) renesas_usbhs has a limited number of controllable devices. |
| 30 | * it can control only 9 devices in generally. |
| 31 | * see DEVADDn / DCPMAXP / PIPEMAXP. |
| 32 | * |
| 33 | * 2) renesas_usbhs pipe number is limited. |
| 34 | * the pipe will be re-used for each devices. |
| 35 | * so, software should control DATA0/1 sequence of each devices. |
| 36 | */ |
| 37 | |
| 38 | |
| 39 | /* |
| 40 | * image of mod_host |
| 41 | * |
| 42 | * +--------+ |
| 43 | * | udev 0 | --> it is used when set address |
| 44 | * +--------+ |
| 45 | * |
| 46 | * +--------+ pipes are reused for each uep. |
| 47 | * | udev 1 |-+- [uep 0 (dcp) ] --+ pipe will be switched when |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 48 | * +--------+ | | other device requested |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 49 | * +- [uep 1 (bulk)] --|---+ +--------------+ |
| 50 | * | +--------------> | pipe0 (dcp) | |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 51 | * +- [uep 2 (bulk)] -@ | +--------------+ |
| 52 | * | | pipe1 (isoc) | |
| 53 | * +--------+ | +--------------+ |
| 54 | * | udev 2 |-+- [uep 0 (dcp) ] -@ +----------> | pipe2 (bulk) | |
| 55 | * +--------+ | +--------------+ |
| 56 | * +- [uep 1 (int) ] ----+ +------> | pipe3 (bulk) | |
| 57 | * | | +--------------+ |
| 58 | * +--------+ +-----|------> | pipe4 (int) | |
| 59 | * | udev 3 |-+- [uep 0 (dcp) ] -@ | +--------------+ |
| 60 | * +--------+ | | | .... | |
| 61 | * +- [uep 1 (bulk)] -@ | | .... | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 62 | * | | |
| 63 | * +- [uep 2 (bulk)]-----------+ |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 64 | * |
| 65 | * @ : uep requested free pipe, but all have been used. |
| 66 | * now it is waiting for free pipe |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 67 | */ |
| 68 | |
| 69 | |
| 70 | /* |
| 71 | * struct |
| 72 | */ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 73 | struct usbhsh_request { |
| 74 | struct urb *urb; |
| 75 | struct usbhs_pkt pkt; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 76 | }; |
| 77 | |
| 78 | struct usbhsh_device { |
| 79 | struct usb_device *usbv; |
| 80 | struct list_head ep_list_head; /* list of usbhsh_ep */ |
| 81 | }; |
| 82 | |
| 83 | struct usbhsh_ep { |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 84 | struct usbhs_pipe *pipe; /* attached pipe */ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 85 | struct usbhsh_device *udev; /* attached udev */ |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 86 | struct usb_host_endpoint *ep; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 87 | struct list_head ep_list; /* list to usbhsh_device */ |
Kuninori Morimoto | 7b332e5 | 2012-11-06 00:11:53 -0800 | [diff] [blame] | 88 | unsigned int counter; /* pipe attach counter */ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 89 | }; |
| 90 | |
| 91 | #define USBHSH_DEVICE_MAX 10 /* see DEVADDn / DCPMAXP / PIPEMAXP */ |
| 92 | #define USBHSH_PORT_MAX 7 /* see DEVADDn :: HUBPORT */ |
| 93 | struct usbhsh_hpriv { |
| 94 | struct usbhs_mod mod; |
| 95 | struct usbhs_pipe *dcp; |
| 96 | |
| 97 | struct usbhsh_device udev[USBHSH_DEVICE_MAX]; |
| 98 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 99 | u32 port_stat; /* USB_PORT_STAT_xxx */ |
| 100 | |
Kuninori Morimoto | 7fccd48 | 2011-10-23 22:55:54 -0700 | [diff] [blame] | 101 | struct completion setup_ack_done; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 102 | }; |
| 103 | |
| 104 | |
| 105 | static const char usbhsh_hcd_name[] = "renesas_usbhs host"; |
| 106 | |
| 107 | /* |
| 108 | * macro |
| 109 | */ |
| 110 | #define usbhsh_priv_to_hpriv(priv) \ |
| 111 | container_of(usbhs_mod_get(priv, USBHS_HOST), struct usbhsh_hpriv, mod) |
| 112 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 113 | #define __usbhsh_for_each_udev(start, pos, h, i) \ |
Kuninori Morimoto | 925403f | 2013-07-11 22:32:31 -0700 | [diff] [blame] | 114 | for ((i) = start; \ |
| 115 | ((i) < USBHSH_DEVICE_MAX) && ((pos) = (h)->udev + (i)); \ |
| 116 | (i)++) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 117 | |
| 118 | #define usbhsh_for_each_udev(pos, hpriv, i) \ |
| 119 | __usbhsh_for_each_udev(1, pos, hpriv, i) |
| 120 | |
| 121 | #define usbhsh_for_each_udev_with_dev0(pos, hpriv, i) \ |
| 122 | __usbhsh_for_each_udev(0, pos, hpriv, i) |
| 123 | |
| 124 | #define usbhsh_hcd_to_hpriv(h) (struct usbhsh_hpriv *)((h)->hcd_priv) |
| 125 | #define usbhsh_hcd_to_dev(h) ((h)->self.controller) |
| 126 | |
| 127 | #define usbhsh_hpriv_to_priv(h) ((h)->mod.priv) |
| 128 | #define usbhsh_hpriv_to_dcp(h) ((h)->dcp) |
| 129 | #define usbhsh_hpriv_to_hcd(h) \ |
| 130 | container_of((void *)h, struct usb_hcd, hcd_priv) |
| 131 | |
| 132 | #define usbhsh_ep_to_uep(u) ((u)->hcpriv) |
| 133 | #define usbhsh_uep_to_pipe(u) ((u)->pipe) |
| 134 | #define usbhsh_uep_to_udev(u) ((u)->udev) |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 135 | #define usbhsh_uep_to_ep(u) ((u)->ep) |
| 136 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 137 | #define usbhsh_urb_to_ureq(u) ((u)->hcpriv) |
| 138 | #define usbhsh_urb_to_usbv(u) ((u)->dev) |
| 139 | |
| 140 | #define usbhsh_usbv_to_udev(d) dev_get_drvdata(&(d)->dev) |
| 141 | |
| 142 | #define usbhsh_udev_to_usbv(h) ((h)->usbv) |
Kuninori Morimoto | ab14230 | 2011-10-31 00:48:00 -0700 | [diff] [blame] | 143 | #define usbhsh_udev_is_used(h) usbhsh_udev_to_usbv(h) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 144 | |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 145 | #define usbhsh_pipe_to_uep(p) ((p)->mod_private) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 146 | |
Kuninori Morimoto | 9c67365 | 2011-10-31 00:47:34 -0700 | [diff] [blame] | 147 | #define usbhsh_device_parent(d) (usbhsh_usbv_to_udev((d)->usbv->parent)) |
| 148 | #define usbhsh_device_hubport(d) ((d)->usbv->portnum) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 149 | #define usbhsh_device_number(h, d) ((int)((d) - (h)->udev)) |
| 150 | #define usbhsh_device_nth(h, d) ((h)->udev + d) |
| 151 | #define usbhsh_device0(h) usbhsh_device_nth(h, 0) |
| 152 | |
| 153 | #define usbhsh_port_stat_init(h) ((h)->port_stat = 0) |
| 154 | #define usbhsh_port_stat_set(h, s) ((h)->port_stat |= (s)) |
| 155 | #define usbhsh_port_stat_clear(h, s) ((h)->port_stat &= ~(s)) |
| 156 | #define usbhsh_port_stat_get(h) ((h)->port_stat) |
| 157 | |
Kuninori Morimoto | 25234b4 | 2011-10-23 19:56:53 -0700 | [diff] [blame] | 158 | #define usbhsh_pkt_to_ureq(p) \ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 159 | container_of((void *)p, struct usbhsh_request, pkt) |
| 160 | |
| 161 | /* |
| 162 | * req alloc/free |
| 163 | */ |
Kuninori Morimoto | 25234b4 | 2011-10-23 19:56:53 -0700 | [diff] [blame] | 164 | static struct usbhsh_request *usbhsh_ureq_alloc(struct usbhsh_hpriv *hpriv, |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 165 | struct urb *urb, |
| 166 | gfp_t mem_flags) |
| 167 | { |
| 168 | struct usbhsh_request *ureq; |
| 169 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 170 | struct device *dev = usbhs_priv_to_dev(priv); |
| 171 | |
Kuninori Morimoto | c5b963f | 2011-10-31 00:47:44 -0700 | [diff] [blame] | 172 | ureq = kzalloc(sizeof(struct usbhsh_request), mem_flags); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 173 | if (!ureq) { |
| 174 | dev_err(dev, "ureq alloc fail\n"); |
| 175 | return NULL; |
| 176 | } |
| 177 | |
| 178 | usbhs_pkt_init(&ureq->pkt); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 179 | ureq->urb = urb; |
Kuninori Morimoto | fc9d5c7 | 2011-10-31 00:47:01 -0700 | [diff] [blame] | 180 | usbhsh_urb_to_ureq(urb) = ureq; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 181 | |
| 182 | return ureq; |
| 183 | } |
| 184 | |
Kuninori Morimoto | 25234b4 | 2011-10-23 19:56:53 -0700 | [diff] [blame] | 185 | static void usbhsh_ureq_free(struct usbhsh_hpriv *hpriv, |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 186 | struct usbhsh_request *ureq) |
| 187 | { |
Kuninori Morimoto | fc9d5c7 | 2011-10-31 00:47:01 -0700 | [diff] [blame] | 188 | usbhsh_urb_to_ureq(ureq->urb) = NULL; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 189 | ureq->urb = NULL; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 190 | |
Kuninori Morimoto | c5b963f | 2011-10-31 00:47:44 -0700 | [diff] [blame] | 191 | kfree(ureq); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 192 | } |
| 193 | |
| 194 | /* |
Kuninori Morimoto | b1930da | 2011-12-08 18:30:23 -0800 | [diff] [blame] | 195 | * status |
| 196 | */ |
| 197 | static int usbhsh_is_running(struct usbhsh_hpriv *hpriv) |
| 198 | { |
| 199 | /* |
| 200 | * we can decide some device is attached or not |
| 201 | * by checking mod.irq_attch |
| 202 | * see |
| 203 | * usbhsh_irq_attch() |
| 204 | * usbhsh_irq_dtch() |
| 205 | */ |
| 206 | return (hpriv->mod.irq_attch == NULL); |
| 207 | } |
| 208 | |
| 209 | /* |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 210 | * pipe control |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 211 | */ |
Kuninori Morimoto | 3edeee3 | 2011-12-08 18:28:54 -0800 | [diff] [blame] | 212 | static void usbhsh_endpoint_sequence_save(struct usbhsh_hpriv *hpriv, |
| 213 | struct urb *urb, |
| 214 | struct usbhs_pkt *pkt) |
| 215 | { |
| 216 | int len = urb->actual_length; |
| 217 | int maxp = usb_endpoint_maxp(&urb->ep->desc); |
| 218 | int t = 0; |
| 219 | |
| 220 | /* DCP is out of sequence control */ |
| 221 | if (usb_pipecontrol(urb->pipe)) |
| 222 | return; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 223 | |
| 224 | /* |
Kuninori Morimoto | 3edeee3 | 2011-12-08 18:28:54 -0800 | [diff] [blame] | 225 | * renesas_usbhs pipe has a limitation in a number. |
| 226 | * So, driver should re-use the limited pipe for each device/endpoint. |
| 227 | * DATA0/1 sequence should be saved for it. |
| 228 | * see [image of mod_host] |
| 229 | * [HARDWARE LIMITATION] |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 230 | */ |
Kuninori Morimoto | 3edeee3 | 2011-12-08 18:28:54 -0800 | [diff] [blame] | 231 | |
| 232 | /* |
| 233 | * next sequence depends on actual_length |
| 234 | * |
| 235 | * ex) actual_length = 1147, maxp = 512 |
| 236 | * data0 : 512 |
| 237 | * data1 : 512 |
| 238 | * data0 : 123 |
| 239 | * data1 is the next sequence |
| 240 | */ |
| 241 | t = len / maxp; |
| 242 | if (len % maxp) |
| 243 | t++; |
| 244 | if (pkt->zero) |
| 245 | t++; |
| 246 | t %= 2; |
| 247 | |
| 248 | if (t) |
| 249 | usb_dotoggle(urb->dev, |
| 250 | usb_pipeendpoint(urb->pipe), |
| 251 | usb_pipeout(urb->pipe)); |
| 252 | } |
| 253 | |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 254 | static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv, |
| 255 | struct urb *urb); |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 256 | |
| 257 | static int usbhsh_pipe_attach(struct usbhsh_hpriv *hpriv, |
| 258 | struct urb *urb) |
| 259 | { |
| 260 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 261 | struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep); |
| 262 | struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb); |
| 263 | struct usbhs_pipe *pipe; |
| 264 | struct usb_endpoint_descriptor *desc = &urb->ep->desc; |
| 265 | struct device *dev = usbhs_priv_to_dev(priv); |
| 266 | unsigned long flags; |
| 267 | int dir_in_req = !!usb_pipein(urb->pipe); |
| 268 | int is_dcp = usb_endpoint_xfer_control(desc); |
| 269 | int i, dir_in; |
| 270 | int ret = -EBUSY; |
| 271 | |
| 272 | /******************** spin lock ********************/ |
| 273 | usbhs_lock(priv, flags); |
| 274 | |
Kuninori Morimoto | 7b332e5 | 2012-11-06 00:11:53 -0800 | [diff] [blame] | 275 | /* |
| 276 | * if uep has been attached to pipe, |
| 277 | * reuse it |
| 278 | */ |
| 279 | if (usbhsh_uep_to_pipe(uep)) { |
| 280 | ret = 0; |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 281 | goto usbhsh_pipe_attach_done; |
| 282 | } |
| 283 | |
| 284 | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { |
| 285 | |
| 286 | /* check pipe type */ |
| 287 | if (!usbhs_pipe_type_is(pipe, usb_endpoint_type(desc))) |
| 288 | continue; |
| 289 | |
| 290 | /* check pipe direction if normal pipe */ |
| 291 | if (!is_dcp) { |
| 292 | dir_in = !!usbhs_pipe_is_dir_in(pipe); |
| 293 | if (0 != (dir_in - dir_in_req)) |
| 294 | continue; |
| 295 | } |
| 296 | |
| 297 | /* check pipe is free */ |
| 298 | if (usbhsh_pipe_to_uep(pipe)) |
| 299 | continue; |
| 300 | |
| 301 | /* |
| 302 | * attach pipe to uep |
| 303 | * |
| 304 | * usbhs_pipe_config_update() should be called after |
| 305 | * usbhs_set_device_config() |
| 306 | * see |
| 307 | * DCPMAXP/PIPEMAXP |
| 308 | */ |
| 309 | usbhsh_uep_to_pipe(uep) = pipe; |
| 310 | usbhsh_pipe_to_uep(pipe) = uep; |
| 311 | |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 312 | usbhs_pipe_config_update(pipe, |
| 313 | usbhsh_device_number(hpriv, udev), |
| 314 | usb_endpoint_num(desc), |
| 315 | usb_endpoint_maxp(desc)); |
| 316 | |
| 317 | dev_dbg(dev, "%s [%d-%d(%s:%s)]\n", __func__, |
| 318 | usbhsh_device_number(hpriv, udev), |
| 319 | usb_endpoint_num(desc), |
| 320 | usbhs_pipe_name(pipe), |
| 321 | dir_in_req ? "in" : "out"); |
| 322 | |
| 323 | ret = 0; |
| 324 | break; |
| 325 | } |
| 326 | |
| 327 | usbhsh_pipe_attach_done: |
Kuninori Morimoto | 7b332e5 | 2012-11-06 00:11:53 -0800 | [diff] [blame] | 328 | if (0 == ret) |
| 329 | uep->counter++; |
| 330 | |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 331 | usbhs_unlock(priv, flags); |
| 332 | /******************** spin unlock ******************/ |
| 333 | |
| 334 | return ret; |
| 335 | } |
| 336 | |
| 337 | static void usbhsh_pipe_detach(struct usbhsh_hpriv *hpriv, |
| 338 | struct usbhsh_ep *uep) |
| 339 | { |
| 340 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 341 | struct usbhs_pipe *pipe; |
| 342 | struct device *dev = usbhs_priv_to_dev(priv); |
| 343 | unsigned long flags; |
| 344 | |
Kuninori Morimoto | 4f053a2 | 2012-10-16 23:31:33 -0700 | [diff] [blame] | 345 | if (unlikely(!uep)) { |
| 346 | dev_err(dev, "no uep\n"); |
| 347 | return; |
| 348 | } |
| 349 | |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 350 | /******************** spin lock ********************/ |
| 351 | usbhs_lock(priv, flags); |
| 352 | |
| 353 | pipe = usbhsh_uep_to_pipe(uep); |
| 354 | |
| 355 | if (unlikely(!pipe)) { |
| 356 | dev_err(dev, "uep doens't have pipe\n"); |
Kuninori Morimoto | 7b332e5 | 2012-11-06 00:11:53 -0800 | [diff] [blame] | 357 | } else if (1 == uep->counter--) { /* last user */ |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 358 | struct usb_host_endpoint *ep = usbhsh_uep_to_ep(uep); |
| 359 | struct usbhsh_device *udev = usbhsh_uep_to_udev(uep); |
| 360 | |
| 361 | /* detach pipe from uep */ |
| 362 | usbhsh_uep_to_pipe(uep) = NULL; |
| 363 | usbhsh_pipe_to_uep(pipe) = NULL; |
| 364 | |
| 365 | dev_dbg(dev, "%s [%d-%d(%s)]\n", __func__, |
| 366 | usbhsh_device_number(hpriv, udev), |
| 367 | usb_endpoint_num(&ep->desc), |
| 368 | usbhs_pipe_name(pipe)); |
| 369 | } |
| 370 | |
| 371 | usbhs_unlock(priv, flags); |
| 372 | /******************** spin unlock ******************/ |
| 373 | } |
| 374 | |
| 375 | /* |
| 376 | * endpoint control |
| 377 | */ |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 378 | static int usbhsh_endpoint_attach(struct usbhsh_hpriv *hpriv, |
| 379 | struct urb *urb, |
| 380 | gfp_t mem_flags) |
| 381 | { |
| 382 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 383 | struct usbhsh_device *udev = usbhsh_device_get(hpriv, urb); |
| 384 | struct usb_host_endpoint *ep = urb->ep; |
| 385 | struct usbhsh_ep *uep; |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 386 | struct device *dev = usbhs_priv_to_dev(priv); |
| 387 | struct usb_endpoint_descriptor *desc = &ep->desc; |
| 388 | unsigned long flags; |
| 389 | |
| 390 | uep = kzalloc(sizeof(struct usbhsh_ep), mem_flags); |
| 391 | if (!uep) { |
| 392 | dev_err(dev, "usbhsh_ep alloc fail\n"); |
| 393 | return -ENOMEM; |
| 394 | } |
| 395 | |
| 396 | /******************** spin lock ********************/ |
| 397 | usbhs_lock(priv, flags); |
| 398 | |
| 399 | /* |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 400 | * init endpoint |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 401 | */ |
Kuninori Morimoto | 7b332e5 | 2012-11-06 00:11:53 -0800 | [diff] [blame] | 402 | uep->counter = 0; |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 403 | INIT_LIST_HEAD(&uep->ep_list); |
| 404 | list_add_tail(&uep->ep_list, &udev->ep_list_head); |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 405 | |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 406 | usbhsh_uep_to_udev(uep) = udev; |
| 407 | usbhsh_uep_to_ep(uep) = ep; |
| 408 | usbhsh_ep_to_uep(ep) = uep; |
| 409 | |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 410 | usbhs_unlock(priv, flags); |
| 411 | /******************** spin unlock ******************/ |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 412 | |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 413 | dev_dbg(dev, "%s [%d-%d]\n", __func__, |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 414 | usbhsh_device_number(hpriv, udev), |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 415 | usb_endpoint_num(desc)); |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 416 | |
| 417 | return 0; |
| 418 | } |
| 419 | |
| 420 | static void usbhsh_endpoint_detach(struct usbhsh_hpriv *hpriv, |
| 421 | struct usb_host_endpoint *ep) |
| 422 | { |
| 423 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 424 | struct device *dev = usbhs_priv_to_dev(priv); |
| 425 | struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep); |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 426 | unsigned long flags; |
| 427 | |
| 428 | if (!uep) |
| 429 | return; |
| 430 | |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 431 | dev_dbg(dev, "%s [%d-%d]\n", __func__, |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 432 | usbhsh_device_number(hpriv, usbhsh_uep_to_udev(uep)), |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 433 | usb_endpoint_num(&ep->desc)); |
| 434 | |
| 435 | if (usbhsh_uep_to_pipe(uep)) |
| 436 | usbhsh_pipe_detach(hpriv, uep); |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 437 | |
| 438 | /******************** spin lock ********************/ |
| 439 | usbhs_lock(priv, flags); |
| 440 | |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 441 | /* remove this endpoint from udev */ |
| 442 | list_del_init(&uep->ep_list); |
| 443 | |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 444 | usbhsh_uep_to_udev(uep) = NULL; |
| 445 | usbhsh_uep_to_ep(uep) = NULL; |
| 446 | usbhsh_ep_to_uep(ep) = NULL; |
| 447 | |
| 448 | usbhs_unlock(priv, flags); |
| 449 | /******************** spin unlock ******************/ |
| 450 | |
| 451 | kfree(uep); |
| 452 | } |
| 453 | |
| 454 | static void usbhsh_endpoint_detach_all(struct usbhsh_hpriv *hpriv, |
| 455 | struct usbhsh_device *udev) |
| 456 | { |
| 457 | struct usbhsh_ep *uep, *next; |
| 458 | |
| 459 | list_for_each_entry_safe(uep, next, &udev->ep_list_head, ep_list) |
| 460 | usbhsh_endpoint_detach(hpriv, usbhsh_uep_to_ep(uep)); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 461 | } |
| 462 | |
| 463 | /* |
| 464 | * device control |
| 465 | */ |
Kuninori Morimoto | 9c67365 | 2011-10-31 00:47:34 -0700 | [diff] [blame] | 466 | static int usbhsh_connected_to_rhdev(struct usb_hcd *hcd, |
| 467 | struct usbhsh_device *udev) |
| 468 | { |
| 469 | struct usb_device *usbv = usbhsh_udev_to_usbv(udev); |
| 470 | |
| 471 | return hcd->self.root_hub == usbv->parent; |
| 472 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 473 | |
| 474 | static int usbhsh_device_has_endpoint(struct usbhsh_device *udev) |
| 475 | { |
| 476 | return !list_empty(&udev->ep_list_head); |
| 477 | } |
| 478 | |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 479 | static struct usbhsh_device *usbhsh_device_get(struct usbhsh_hpriv *hpriv, |
| 480 | struct urb *urb) |
| 481 | { |
| 482 | struct usb_device *usbv = usbhsh_urb_to_usbv(urb); |
| 483 | struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv); |
| 484 | |
| 485 | /* usbhsh_device_attach() is still not called */ |
| 486 | if (!udev) |
| 487 | return NULL; |
| 488 | |
| 489 | /* if it is device0, return it */ |
| 490 | if (0 == usb_pipedevice(urb->pipe)) |
| 491 | return usbhsh_device0(hpriv); |
| 492 | |
| 493 | /* return attached device */ |
| 494 | return udev; |
| 495 | } |
| 496 | |
Kuninori Morimoto | 7aac8d1 | 2011-10-31 00:49:09 -0700 | [diff] [blame] | 497 | static struct usbhsh_device *usbhsh_device_attach(struct usbhsh_hpriv *hpriv, |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 498 | struct urb *urb) |
| 499 | { |
| 500 | struct usbhsh_device *udev = NULL; |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 501 | struct usbhsh_device *udev0 = usbhsh_device0(hpriv); |
| 502 | struct usbhsh_device *pos; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 503 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); |
| 504 | struct device *dev = usbhsh_hcd_to_dev(hcd); |
| 505 | struct usb_device *usbv = usbhsh_urb_to_usbv(urb); |
| 506 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
Kuninori Morimoto | d399f90 | 2011-10-31 00:48:35 -0700 | [diff] [blame] | 507 | unsigned long flags; |
Kuninori Morimoto | 9c67365 | 2011-10-31 00:47:34 -0700 | [diff] [blame] | 508 | u16 upphub, hubport; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 509 | int i; |
| 510 | |
| 511 | /* |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 512 | * This function should be called only while urb is pointing to device0. |
| 513 | * It will attach unused usbhsh_device to urb (usbv), |
| 514 | * and initialize device0. |
| 515 | * You can use usbhsh_device_get() to get "current" udev, |
| 516 | * and usbhsh_usbv_to_udev() is for "attached" udev. |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 517 | */ |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 518 | if (0 != usb_pipedevice(urb->pipe)) { |
| 519 | dev_err(dev, "%s fail: urb isn't pointing device0\n", __func__); |
| 520 | return NULL; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 521 | } |
| 522 | |
Kuninori Morimoto | d399f90 | 2011-10-31 00:48:35 -0700 | [diff] [blame] | 523 | /******************** spin lock ********************/ |
| 524 | usbhs_lock(priv, flags); |
| 525 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 526 | /* |
| 527 | * find unused device |
| 528 | */ |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 529 | usbhsh_for_each_udev(pos, hpriv, i) { |
| 530 | if (usbhsh_udev_is_used(pos)) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 531 | continue; |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 532 | udev = pos; |
| 533 | break; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 534 | } |
| 535 | |
Kuninori Morimoto | d399f90 | 2011-10-31 00:48:35 -0700 | [diff] [blame] | 536 | if (udev) { |
| 537 | /* |
| 538 | * usbhsh_usbv_to_udev() |
| 539 | * usbhsh_udev_to_usbv() |
| 540 | * will be enable |
| 541 | */ |
| 542 | dev_set_drvdata(&usbv->dev, udev); |
| 543 | udev->usbv = usbv; |
| 544 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 545 | |
Kuninori Morimoto | d399f90 | 2011-10-31 00:48:35 -0700 | [diff] [blame] | 546 | usbhs_unlock(priv, flags); |
| 547 | /******************** spin unlock ******************/ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 548 | |
Kuninori Morimoto | ab14230 | 2011-10-31 00:48:00 -0700 | [diff] [blame] | 549 | if (!udev) { |
| 550 | dev_err(dev, "no free usbhsh_device\n"); |
| 551 | return NULL; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 552 | } |
| 553 | |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 554 | if (usbhsh_device_has_endpoint(udev)) { |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 555 | dev_warn(dev, "udev have old endpoint\n"); |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 556 | usbhsh_endpoint_detach_all(hpriv, udev); |
| 557 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 558 | |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 559 | if (usbhsh_device_has_endpoint(udev0)) { |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 560 | dev_warn(dev, "udev0 have old endpoint\n"); |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 561 | usbhsh_endpoint_detach_all(hpriv, udev0); |
| 562 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 563 | |
| 564 | /* uep will be attached */ |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 565 | INIT_LIST_HEAD(&udev0->ep_list_head); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 566 | INIT_LIST_HEAD(&udev->ep_list_head); |
| 567 | |
| 568 | /* |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 569 | * set device0 config |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 570 | */ |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 571 | usbhs_set_device_config(priv, |
| 572 | 0, 0, 0, usbv->speed); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 573 | |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 574 | /* |
| 575 | * set new device config |
| 576 | */ |
Kuninori Morimoto | 9c67365 | 2011-10-31 00:47:34 -0700 | [diff] [blame] | 577 | upphub = 0; |
| 578 | hubport = 0; |
| 579 | if (!usbhsh_connected_to_rhdev(hcd, udev)) { |
| 580 | /* if udev is not connected to rhdev, it means parent is Hub */ |
| 581 | struct usbhsh_device *parent = usbhsh_device_parent(udev); |
| 582 | |
| 583 | upphub = usbhsh_device_number(hpriv, parent); |
| 584 | hubport = usbhsh_device_hubport(udev); |
| 585 | |
| 586 | dev_dbg(dev, "%s connecte to Hub [%d:%d](%p)\n", __func__, |
| 587 | upphub, hubport, parent); |
| 588 | } |
| 589 | |
Kuninori Morimoto | 3dd4926 | 2011-10-31 00:47:13 -0700 | [diff] [blame] | 590 | usbhs_set_device_config(priv, |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 591 | usbhsh_device_number(hpriv, udev), |
Kuninori Morimoto | 9c67365 | 2011-10-31 00:47:34 -0700 | [diff] [blame] | 592 | upphub, hubport, usbv->speed); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 593 | |
| 594 | dev_dbg(dev, "%s [%d](%p)\n", __func__, |
| 595 | usbhsh_device_number(hpriv, udev), udev); |
| 596 | |
| 597 | return udev; |
| 598 | } |
| 599 | |
Kuninori Morimoto | 7aac8d1 | 2011-10-31 00:49:09 -0700 | [diff] [blame] | 600 | static void usbhsh_device_detach(struct usbhsh_hpriv *hpriv, |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 601 | struct usbhsh_device *udev) |
| 602 | { |
| 603 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); |
Kuninori Morimoto | d399f90 | 2011-10-31 00:48:35 -0700 | [diff] [blame] | 604 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 605 | struct device *dev = usbhsh_hcd_to_dev(hcd); |
| 606 | struct usb_device *usbv = usbhsh_udev_to_usbv(udev); |
Kuninori Morimoto | d399f90 | 2011-10-31 00:48:35 -0700 | [diff] [blame] | 607 | unsigned long flags; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 608 | |
| 609 | dev_dbg(dev, "%s [%d](%p)\n", __func__, |
| 610 | usbhsh_device_number(hpriv, udev), udev); |
| 611 | |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 612 | if (usbhsh_device_has_endpoint(udev)) { |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 613 | dev_warn(dev, "udev still have endpoint\n"); |
Kuninori Morimoto | e4c57de | 2011-12-08 18:27:49 -0800 | [diff] [blame] | 614 | usbhsh_endpoint_detach_all(hpriv, udev); |
| 615 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 616 | |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 617 | /* |
| 618 | * There is nothing to do if it is device0. |
| 619 | * see |
| 620 | * usbhsh_device_attach() |
| 621 | * usbhsh_device_get() |
| 622 | */ |
| 623 | if (0 == usbhsh_device_number(hpriv, udev)) |
| 624 | return; |
| 625 | |
Kuninori Morimoto | d399f90 | 2011-10-31 00:48:35 -0700 | [diff] [blame] | 626 | /******************** spin lock ********************/ |
| 627 | usbhs_lock(priv, flags); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 628 | |
| 629 | /* |
| 630 | * usbhsh_usbv_to_udev() |
| 631 | * usbhsh_udev_to_usbv() |
| 632 | * will be disable |
| 633 | */ |
| 634 | dev_set_drvdata(&usbv->dev, NULL); |
| 635 | udev->usbv = NULL; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 636 | |
Kuninori Morimoto | d399f90 | 2011-10-31 00:48:35 -0700 | [diff] [blame] | 637 | usbhs_unlock(priv, flags); |
| 638 | /******************** spin unlock ******************/ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 639 | } |
| 640 | |
| 641 | /* |
| 642 | * queue push/pop |
| 643 | */ |
| 644 | static void usbhsh_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) |
| 645 | { |
Kuninori Morimoto | 25234b4 | 2011-10-23 19:56:53 -0700 | [diff] [blame] | 646 | struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 647 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
| 648 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); |
| 649 | struct urb *urb = ureq->urb; |
| 650 | struct device *dev = usbhs_priv_to_dev(priv); |
Kuninori Morimoto | 6d0376f | 2011-12-08 18:31:11 -0800 | [diff] [blame] | 651 | int status = 0; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 652 | |
| 653 | dev_dbg(dev, "%s\n", __func__); |
| 654 | |
| 655 | if (!urb) { |
| 656 | dev_warn(dev, "pkt doesn't have urb\n"); |
| 657 | return; |
| 658 | } |
| 659 | |
Kuninori Morimoto | 6d0376f | 2011-12-08 18:31:11 -0800 | [diff] [blame] | 660 | if (!usbhsh_is_running(hpriv)) |
| 661 | status = -ESHUTDOWN; |
| 662 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 663 | urb->actual_length = pkt->actual; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 664 | |
Kuninori Morimoto | 3edeee3 | 2011-12-08 18:28:54 -0800 | [diff] [blame] | 665 | usbhsh_endpoint_sequence_save(hpriv, urb, pkt); |
Kuninori Morimoto | e0b64ce | 2012-12-09 21:06:37 -0800 | [diff] [blame] | 666 | usbhsh_ureq_free(hpriv, ureq); |
| 667 | |
Kuninori Morimoto | d9b78f3 | 2011-12-15 01:53:18 -0800 | [diff] [blame] | 668 | usbhsh_pipe_detach(hpriv, usbhsh_ep_to_uep(urb->ep)); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 669 | |
| 670 | usb_hcd_unlink_urb_from_ep(hcd, urb); |
Kuninori Morimoto | 6d0376f | 2011-12-08 18:31:11 -0800 | [diff] [blame] | 671 | usb_hcd_giveback_urb(hcd, urb, status); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 672 | } |
| 673 | |
| 674 | static int usbhsh_queue_push(struct usb_hcd *hcd, |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 675 | struct urb *urb, |
| 676 | gfp_t mem_flags) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 677 | { |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 678 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); |
Kuninori Morimoto | 3eddc9e | 2011-10-31 00:48:46 -0700 | [diff] [blame] | 679 | struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep); |
| 680 | struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 681 | struct device *dev = usbhsh_hcd_to_dev(hcd); |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 682 | struct usbhsh_request *ureq; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 683 | void *buf; |
Kuninori Morimoto | 3edeee3 | 2011-12-08 18:28:54 -0800 | [diff] [blame] | 684 | int len, sequence; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 685 | |
| 686 | if (usb_pipeisoc(urb->pipe)) { |
| 687 | dev_err(dev, "pipe iso is not supported now\n"); |
| 688 | return -EIO; |
| 689 | } |
| 690 | |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 691 | /* this ureq will be freed on usbhsh_queue_done() */ |
| 692 | ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags); |
| 693 | if (unlikely(!ureq)) { |
| 694 | dev_err(dev, "ureq alloc fail\n"); |
| 695 | return -ENOMEM; |
| 696 | } |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 697 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 698 | if (usb_pipein(urb->pipe)) |
Kuninori Morimoto | 87c2905 | 2012-10-29 00:45:24 -0700 | [diff] [blame] | 699 | pipe->handler = &usbhs_fifo_dma_pop_handler; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 700 | else |
Kuninori Morimoto | 87c2905 | 2012-10-29 00:45:24 -0700 | [diff] [blame] | 701 | pipe->handler = &usbhs_fifo_dma_push_handler; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 702 | |
| 703 | buf = (void *)(urb->transfer_buffer + urb->actual_length); |
| 704 | len = urb->transfer_buffer_length - urb->actual_length; |
| 705 | |
Kuninori Morimoto | 3edeee3 | 2011-12-08 18:28:54 -0800 | [diff] [blame] | 706 | sequence = usb_gettoggle(urb->dev, |
| 707 | usb_pipeendpoint(urb->pipe), |
| 708 | usb_pipeout(urb->pipe)); |
| 709 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 710 | dev_dbg(dev, "%s\n", __func__); |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 711 | usbhs_pkt_push(pipe, &ureq->pkt, usbhsh_queue_done, |
Kuninori Morimoto | 3edeee3 | 2011-12-08 18:28:54 -0800 | [diff] [blame] | 712 | buf, len, (urb->transfer_flags & URB_ZERO_PACKET), |
| 713 | sequence); |
| 714 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 715 | usbhs_pkt_start(pipe); |
| 716 | |
| 717 | return 0; |
| 718 | } |
| 719 | |
Kuninori Morimoto | 2d833fa | 2011-12-08 18:31:37 -0800 | [diff] [blame] | 720 | static void usbhsh_queue_force_pop(struct usbhs_priv *priv, |
| 721 | struct usbhs_pipe *pipe) |
| 722 | { |
| 723 | struct usbhs_pkt *pkt; |
| 724 | |
| 725 | while (1) { |
| 726 | pkt = usbhs_pkt_pop(pipe, NULL); |
| 727 | if (!pkt) |
| 728 | break; |
| 729 | |
| 730 | /* |
| 731 | * if all packet are gone, usbhsh_endpoint_disable() |
| 732 | * will be called. |
| 733 | * then, attached device/endpoint/pipe will be detached |
| 734 | */ |
| 735 | usbhsh_queue_done(priv, pkt); |
| 736 | } |
| 737 | } |
| 738 | |
| 739 | static void usbhsh_queue_force_pop_all(struct usbhs_priv *priv) |
| 740 | { |
| 741 | struct usbhs_pipe *pos; |
| 742 | int i; |
| 743 | |
| 744 | usbhs_for_each_pipe_with_dcp(pos, priv, i) |
| 745 | usbhsh_queue_force_pop(priv, pos); |
| 746 | } |
| 747 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 748 | /* |
| 749 | * DCP setup stage |
| 750 | */ |
| 751 | static int usbhsh_is_request_address(struct urb *urb) |
| 752 | { |
Kuninori Morimoto | 25234b4 | 2011-10-23 19:56:53 -0700 | [diff] [blame] | 753 | struct usb_ctrlrequest *req; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 754 | |
Kuninori Morimoto | 25234b4 | 2011-10-23 19:56:53 -0700 | [diff] [blame] | 755 | req = (struct usb_ctrlrequest *)urb->setup_packet; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 756 | |
Kuninori Morimoto | 25234b4 | 2011-10-23 19:56:53 -0700 | [diff] [blame] | 757 | if ((DeviceOutRequest == req->bRequestType << 8) && |
| 758 | (USB_REQ_SET_ADDRESS == req->bRequest)) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 759 | return 1; |
| 760 | else |
| 761 | return 0; |
| 762 | } |
| 763 | |
| 764 | static void usbhsh_setup_stage_packet_push(struct usbhsh_hpriv *hpriv, |
| 765 | struct urb *urb, |
| 766 | struct usbhs_pipe *pipe) |
| 767 | { |
| 768 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 769 | struct usb_ctrlrequest req; |
| 770 | struct device *dev = usbhs_priv_to_dev(priv); |
| 771 | |
| 772 | /* |
| 773 | * wait setup packet ACK |
| 774 | * see |
| 775 | * usbhsh_irq_setup_ack() |
| 776 | * usbhsh_irq_setup_err() |
| 777 | */ |
Kuninori Morimoto | 7fccd48 | 2011-10-23 22:55:54 -0700 | [diff] [blame] | 778 | init_completion(&hpriv->setup_ack_done); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 779 | |
| 780 | /* copy original request */ |
| 781 | memcpy(&req, urb->setup_packet, sizeof(struct usb_ctrlrequest)); |
| 782 | |
| 783 | /* |
| 784 | * renesas_usbhs can not use original usb address. |
| 785 | * see HARDWARE LIMITATION. |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 786 | * modify usb address here to use attached device. |
| 787 | * see usbhsh_device_attach() |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 788 | */ |
| 789 | if (usbhsh_is_request_address(urb)) { |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 790 | struct usb_device *usbv = usbhsh_urb_to_usbv(urb); |
| 791 | struct usbhsh_device *udev = usbhsh_usbv_to_udev(usbv); |
| 792 | |
| 793 | /* udev is a attached device */ |
| 794 | req.wValue = usbhsh_device_number(hpriv, udev); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 795 | dev_dbg(dev, "create new address - %d\n", req.wValue); |
| 796 | } |
| 797 | |
| 798 | /* set request */ |
| 799 | usbhs_usbreq_set_val(priv, &req); |
| 800 | |
| 801 | /* |
| 802 | * wait setup packet ACK |
| 803 | */ |
Kuninori Morimoto | 7fccd48 | 2011-10-23 22:55:54 -0700 | [diff] [blame] | 804 | wait_for_completion(&hpriv->setup_ack_done); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 805 | |
| 806 | dev_dbg(dev, "%s done\n", __func__); |
| 807 | } |
| 808 | |
| 809 | /* |
| 810 | * DCP data stage |
| 811 | */ |
| 812 | static void usbhsh_data_stage_packet_done(struct usbhs_priv *priv, |
| 813 | struct usbhs_pkt *pkt) |
| 814 | { |
Kuninori Morimoto | 25234b4 | 2011-10-23 19:56:53 -0700 | [diff] [blame] | 815 | struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 816 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 817 | |
| 818 | /* this ureq was connected to urb when usbhsh_urb_enqueue() */ |
| 819 | |
Kuninori Morimoto | 25234b4 | 2011-10-23 19:56:53 -0700 | [diff] [blame] | 820 | usbhsh_ureq_free(hpriv, ureq); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 821 | } |
| 822 | |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 823 | static int usbhsh_data_stage_packet_push(struct usbhsh_hpriv *hpriv, |
| 824 | struct urb *urb, |
| 825 | struct usbhs_pipe *pipe, |
| 826 | gfp_t mem_flags) |
| 827 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 828 | { |
| 829 | struct usbhsh_request *ureq; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 830 | |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 831 | /* this ureq will be freed on usbhsh_data_stage_packet_done() */ |
| 832 | ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags); |
| 833 | if (unlikely(!ureq)) |
| 834 | return -ENOMEM; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 835 | |
| 836 | if (usb_pipein(urb->pipe)) |
| 837 | pipe->handler = &usbhs_dcp_data_stage_in_handler; |
| 838 | else |
| 839 | pipe->handler = &usbhs_dcp_data_stage_out_handler; |
| 840 | |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 841 | usbhs_pkt_push(pipe, &ureq->pkt, |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 842 | usbhsh_data_stage_packet_done, |
| 843 | urb->transfer_buffer, |
| 844 | urb->transfer_buffer_length, |
Kuninori Morimoto | 3edeee3 | 2011-12-08 18:28:54 -0800 | [diff] [blame] | 845 | (urb->transfer_flags & URB_ZERO_PACKET), |
| 846 | -1); |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 847 | |
| 848 | return 0; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 849 | } |
| 850 | |
| 851 | /* |
| 852 | * DCP status stage |
| 853 | */ |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 854 | static int usbhsh_status_stage_packet_push(struct usbhsh_hpriv *hpriv, |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 855 | struct urb *urb, |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 856 | struct usbhs_pipe *pipe, |
| 857 | gfp_t mem_flags) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 858 | { |
| 859 | struct usbhsh_request *ureq; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 860 | |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 861 | /* This ureq will be freed on usbhsh_queue_done() */ |
| 862 | ureq = usbhsh_ureq_alloc(hpriv, urb, mem_flags); |
| 863 | if (unlikely(!ureq)) |
| 864 | return -ENOMEM; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 865 | |
| 866 | if (usb_pipein(urb->pipe)) |
| 867 | pipe->handler = &usbhs_dcp_status_stage_in_handler; |
| 868 | else |
| 869 | pipe->handler = &usbhs_dcp_status_stage_out_handler; |
| 870 | |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 871 | usbhs_pkt_push(pipe, &ureq->pkt, |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 872 | usbhsh_queue_done, |
| 873 | NULL, |
| 874 | urb->transfer_buffer_length, |
Kuninori Morimoto | 3edeee3 | 2011-12-08 18:28:54 -0800 | [diff] [blame] | 875 | 0, -1); |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 876 | |
| 877 | return 0; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 878 | } |
| 879 | |
| 880 | static int usbhsh_dcp_queue_push(struct usb_hcd *hcd, |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 881 | struct urb *urb, |
| 882 | gfp_t mflags) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 883 | { |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 884 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); |
Kuninori Morimoto | 3eddc9e | 2011-10-31 00:48:46 -0700 | [diff] [blame] | 885 | struct usbhsh_ep *uep = usbhsh_ep_to_uep(urb->ep); |
| 886 | struct usbhs_pipe *pipe = usbhsh_uep_to_pipe(uep); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 887 | struct device *dev = usbhsh_hcd_to_dev(hcd); |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 888 | int ret; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 889 | |
| 890 | dev_dbg(dev, "%s\n", __func__); |
| 891 | |
| 892 | /* |
| 893 | * setup stage |
| 894 | * |
| 895 | * usbhsh_send_setup_stage_packet() wait SACK/SIGN |
| 896 | */ |
| 897 | usbhsh_setup_stage_packet_push(hpriv, urb, pipe); |
| 898 | |
| 899 | /* |
| 900 | * data stage |
| 901 | * |
| 902 | * It is pushed only when urb has buffer. |
| 903 | */ |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 904 | if (urb->transfer_buffer_length) { |
| 905 | ret = usbhsh_data_stage_packet_push(hpriv, urb, pipe, mflags); |
| 906 | if (ret < 0) { |
| 907 | dev_err(dev, "data stage failed\n"); |
| 908 | return ret; |
| 909 | } |
| 910 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 911 | |
| 912 | /* |
| 913 | * status stage |
| 914 | */ |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 915 | ret = usbhsh_status_stage_packet_push(hpriv, urb, pipe, mflags); |
| 916 | if (ret < 0) { |
| 917 | dev_err(dev, "status stage failed\n"); |
| 918 | return ret; |
| 919 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 920 | |
| 921 | /* |
| 922 | * start pushed packets |
| 923 | */ |
| 924 | usbhs_pkt_start(pipe); |
| 925 | |
| 926 | return 0; |
| 927 | } |
| 928 | |
| 929 | /* |
| 930 | * dma map functions |
| 931 | */ |
| 932 | static int usbhsh_dma_map_ctrl(struct usbhs_pkt *pkt, int map) |
| 933 | { |
Kuninori Morimoto | 87c2905 | 2012-10-29 00:45:24 -0700 | [diff] [blame] | 934 | if (map) { |
| 935 | struct usbhsh_request *ureq = usbhsh_pkt_to_ureq(pkt); |
| 936 | struct urb *urb = ureq->urb; |
| 937 | |
| 938 | /* it can not use scatter/gather */ |
| 939 | if (urb->num_sgs) |
| 940 | return -EINVAL; |
| 941 | |
| 942 | pkt->dma = urb->transfer_dma; |
| 943 | if (!pkt->dma) |
| 944 | return -EINVAL; |
| 945 | } |
| 946 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 947 | return 0; |
| 948 | } |
| 949 | |
| 950 | /* |
| 951 | * for hc_driver |
| 952 | */ |
| 953 | static int usbhsh_host_start(struct usb_hcd *hcd) |
| 954 | { |
| 955 | return 0; |
| 956 | } |
| 957 | |
| 958 | static void usbhsh_host_stop(struct usb_hcd *hcd) |
| 959 | { |
| 960 | } |
| 961 | |
| 962 | static int usbhsh_urb_enqueue(struct usb_hcd *hcd, |
| 963 | struct urb *urb, |
| 964 | gfp_t mem_flags) |
| 965 | { |
| 966 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); |
| 967 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 968 | struct device *dev = usbhs_priv_to_dev(priv); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 969 | struct usb_host_endpoint *ep = urb->ep; |
Kuninori Morimoto | 7aac8d1 | 2011-10-31 00:49:09 -0700 | [diff] [blame] | 970 | struct usbhsh_device *new_udev = NULL; |
Kuninori Morimoto | 73ef635 | 2011-10-24 02:24:49 -0700 | [diff] [blame] | 971 | int is_dir_in = usb_pipein(urb->pipe); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 972 | int ret; |
| 973 | |
Kuninori Morimoto | 73ef635 | 2011-10-24 02:24:49 -0700 | [diff] [blame] | 974 | dev_dbg(dev, "%s (%s)\n", __func__, is_dir_in ? "in" : "out"); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 975 | |
Kuninori Morimoto | b1930da | 2011-12-08 18:30:23 -0800 | [diff] [blame] | 976 | if (!usbhsh_is_running(hpriv)) { |
| 977 | ret = -EIO; |
Kuninori Morimoto | 15a3838 | 2011-12-08 18:31:53 -0800 | [diff] [blame] | 978 | dev_err(dev, "host is not running\n"); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 979 | goto usbhsh_urb_enqueue_error_not_linked; |
Kuninori Morimoto | b1930da | 2011-12-08 18:30:23 -0800 | [diff] [blame] | 980 | } |
| 981 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 982 | ret = usb_hcd_link_urb_to_ep(hcd, urb); |
Kuninori Morimoto | 15a3838 | 2011-12-08 18:31:53 -0800 | [diff] [blame] | 983 | if (ret) { |
| 984 | dev_err(dev, "urb link failed\n"); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 985 | goto usbhsh_urb_enqueue_error_not_linked; |
Kuninori Morimoto | 15a3838 | 2011-12-08 18:31:53 -0800 | [diff] [blame] | 986 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 987 | |
| 988 | /* |
Kuninori Morimoto | 7aac8d1 | 2011-10-31 00:49:09 -0700 | [diff] [blame] | 989 | * attach udev if needed |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 990 | * see [image of mod_host] |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 991 | */ |
Kuninori Morimoto | c1e4877 | 2011-12-08 18:27:21 -0800 | [diff] [blame] | 992 | if (!usbhsh_device_get(hpriv, urb)) { |
Kuninori Morimoto | 7aac8d1 | 2011-10-31 00:49:09 -0700 | [diff] [blame] | 993 | new_udev = usbhsh_device_attach(hpriv, urb); |
Kuninori Morimoto | 37332ee | 2011-12-08 18:25:37 -0800 | [diff] [blame] | 994 | if (!new_udev) { |
| 995 | ret = -EIO; |
Kuninori Morimoto | 15a3838 | 2011-12-08 18:31:53 -0800 | [diff] [blame] | 996 | dev_err(dev, "device attach failed\n"); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 997 | goto usbhsh_urb_enqueue_error_not_linked; |
Kuninori Morimoto | 37332ee | 2011-12-08 18:25:37 -0800 | [diff] [blame] | 998 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 999 | } |
| 1000 | |
| 1001 | /* |
Kuninori Morimoto | 4825093 | 2011-10-31 00:48:59 -0700 | [diff] [blame] | 1002 | * attach endpoint if needed |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 1003 | * see [image of mod_host] |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1004 | */ |
Kuninori Morimoto | 4825093 | 2011-10-31 00:48:59 -0700 | [diff] [blame] | 1005 | if (!usbhsh_ep_to_uep(ep)) { |
| 1006 | ret = usbhsh_endpoint_attach(hpriv, urb, mem_flags); |
Kuninori Morimoto | 15a3838 | 2011-12-08 18:31:53 -0800 | [diff] [blame] | 1007 | if (ret < 0) { |
| 1008 | dev_err(dev, "endpoint attach failed\n"); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1009 | goto usbhsh_urb_enqueue_error_free_device; |
Kuninori Morimoto | 15a3838 | 2011-12-08 18:31:53 -0800 | [diff] [blame] | 1010 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1011 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1012 | |
| 1013 | /* |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 1014 | * attach pipe to endpoint |
| 1015 | * see [image of mod_host] |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1016 | */ |
Kuninori Morimoto | 7b332e5 | 2012-11-06 00:11:53 -0800 | [diff] [blame] | 1017 | ret = usbhsh_pipe_attach(hpriv, urb); |
Kuninori Morimoto | 15a3838 | 2011-12-08 18:31:53 -0800 | [diff] [blame] | 1018 | if (ret < 0) { |
| 1019 | dev_err(dev, "pipe attach failed\n"); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1020 | goto usbhsh_urb_enqueue_error_free_endpoint; |
| 1021 | } |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1022 | |
| 1023 | /* |
| 1024 | * push packet |
| 1025 | */ |
| 1026 | if (usb_pipecontrol(urb->pipe)) |
Kuninori Morimoto | 3eddc9e | 2011-10-31 00:48:46 -0700 | [diff] [blame] | 1027 | ret = usbhsh_dcp_queue_push(hcd, urb, mem_flags); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1028 | else |
Kuninori Morimoto | 3eddc9e | 2011-10-31 00:48:46 -0700 | [diff] [blame] | 1029 | ret = usbhsh_queue_push(hcd, urb, mem_flags); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1030 | |
Kuninori Morimoto | ee8a0bf | 2011-10-31 00:46:50 -0700 | [diff] [blame] | 1031 | return ret; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1032 | |
| 1033 | usbhsh_urb_enqueue_error_free_endpoint: |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 1034 | usbhsh_endpoint_detach(hpriv, ep); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1035 | usbhsh_urb_enqueue_error_free_device: |
| 1036 | if (new_udev) |
Kuninori Morimoto | 7aac8d1 | 2011-10-31 00:49:09 -0700 | [diff] [blame] | 1037 | usbhsh_device_detach(hpriv, new_udev); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1038 | usbhsh_urb_enqueue_error_not_linked: |
| 1039 | |
| 1040 | dev_dbg(dev, "%s error\n", __func__); |
| 1041 | |
| 1042 | return ret; |
| 1043 | } |
| 1044 | |
| 1045 | static int usbhsh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) |
| 1046 | { |
| 1047 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); |
| 1048 | struct usbhsh_request *ureq = usbhsh_urb_to_ureq(urb); |
| 1049 | |
| 1050 | if (ureq) { |
Kuninori Morimoto | 5479654 | 2011-12-08 18:26:07 -0800 | [diff] [blame] | 1051 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 1052 | struct usbhs_pkt *pkt = &ureq->pkt; |
| 1053 | |
| 1054 | usbhs_pkt_pop(pkt->pipe, pkt); |
| 1055 | usbhsh_queue_done(priv, pkt); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1056 | } |
| 1057 | |
| 1058 | return 0; |
| 1059 | } |
| 1060 | |
| 1061 | static void usbhsh_endpoint_disable(struct usb_hcd *hcd, |
| 1062 | struct usb_host_endpoint *ep) |
| 1063 | { |
| 1064 | struct usbhsh_ep *uep = usbhsh_ep_to_uep(ep); |
| 1065 | struct usbhsh_device *udev; |
| 1066 | struct usbhsh_hpriv *hpriv; |
| 1067 | |
| 1068 | /* |
| 1069 | * this function might be called manytimes by same hcd/ep |
Kuninori Morimoto | fca8ab7 | 2011-10-31 00:47:24 -0700 | [diff] [blame] | 1070 | * in-endpoint == out-endpoint if ep == dcp. |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1071 | */ |
| 1072 | if (!uep) |
| 1073 | return; |
| 1074 | |
| 1075 | udev = usbhsh_uep_to_udev(uep); |
| 1076 | hpriv = usbhsh_hcd_to_hpriv(hcd); |
| 1077 | |
Kuninori Morimoto | 4825093 | 2011-10-31 00:48:59 -0700 | [diff] [blame] | 1078 | usbhsh_endpoint_detach(hpriv, ep); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1079 | |
| 1080 | /* |
| 1081 | * if there is no endpoint, |
| 1082 | * free device |
| 1083 | */ |
| 1084 | if (!usbhsh_device_has_endpoint(udev)) |
Kuninori Morimoto | 7aac8d1 | 2011-10-31 00:49:09 -0700 | [diff] [blame] | 1085 | usbhsh_device_detach(hpriv, udev); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1086 | } |
| 1087 | |
| 1088 | static int usbhsh_hub_status_data(struct usb_hcd *hcd, char *buf) |
| 1089 | { |
| 1090 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1091 | int roothub_id = 1; /* only 1 root hub */ |
| 1092 | |
| 1093 | /* |
| 1094 | * does port stat was changed ? |
| 1095 | * check USB_PORT_STAT_C_xxx << 16 |
| 1096 | */ |
| 1097 | if (usbhsh_port_stat_get(hpriv) & 0xFFFF0000) |
| 1098 | *buf = (1 << roothub_id); |
| 1099 | else |
| 1100 | *buf = 0; |
| 1101 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1102 | return !!(*buf); |
| 1103 | } |
| 1104 | |
| 1105 | static int __usbhsh_hub_hub_feature(struct usbhsh_hpriv *hpriv, |
| 1106 | u16 typeReq, u16 wValue, |
| 1107 | u16 wIndex, char *buf, u16 wLength) |
| 1108 | { |
| 1109 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 1110 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1111 | |
| 1112 | switch (wValue) { |
| 1113 | case C_HUB_OVER_CURRENT: |
| 1114 | case C_HUB_LOCAL_POWER: |
| 1115 | dev_dbg(dev, "%s :: C_HUB_xx\n", __func__); |
| 1116 | return 0; |
| 1117 | } |
| 1118 | |
| 1119 | return -EPIPE; |
| 1120 | } |
| 1121 | |
| 1122 | static int __usbhsh_hub_port_feature(struct usbhsh_hpriv *hpriv, |
| 1123 | u16 typeReq, u16 wValue, |
| 1124 | u16 wIndex, char *buf, u16 wLength) |
| 1125 | { |
| 1126 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 1127 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1128 | int enable = (typeReq == SetPortFeature); |
| 1129 | int speed, i, timeout = 128; |
| 1130 | int roothub_id = 1; /* only 1 root hub */ |
| 1131 | |
| 1132 | /* common error */ |
| 1133 | if (wIndex > roothub_id || wLength != 0) |
| 1134 | return -EPIPE; |
| 1135 | |
| 1136 | /* check wValue */ |
| 1137 | switch (wValue) { |
| 1138 | case USB_PORT_FEAT_POWER: |
| 1139 | usbhs_vbus_ctrl(priv, enable); |
| 1140 | dev_dbg(dev, "%s :: USB_PORT_FEAT_POWER\n", __func__); |
| 1141 | break; |
| 1142 | |
| 1143 | case USB_PORT_FEAT_ENABLE: |
| 1144 | case USB_PORT_FEAT_SUSPEND: |
| 1145 | case USB_PORT_FEAT_C_ENABLE: |
| 1146 | case USB_PORT_FEAT_C_SUSPEND: |
| 1147 | case USB_PORT_FEAT_C_CONNECTION: |
| 1148 | case USB_PORT_FEAT_C_OVER_CURRENT: |
| 1149 | case USB_PORT_FEAT_C_RESET: |
| 1150 | dev_dbg(dev, "%s :: USB_PORT_FEAT_xxx\n", __func__); |
| 1151 | break; |
| 1152 | |
| 1153 | case USB_PORT_FEAT_RESET: |
| 1154 | if (!enable) |
| 1155 | break; |
| 1156 | |
| 1157 | usbhsh_port_stat_clear(hpriv, |
| 1158 | USB_PORT_STAT_HIGH_SPEED | |
| 1159 | USB_PORT_STAT_LOW_SPEED); |
| 1160 | |
Kuninori Morimoto | 2d833fa | 2011-12-08 18:31:37 -0800 | [diff] [blame] | 1161 | usbhsh_queue_force_pop_all(priv); |
| 1162 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1163 | usbhs_bus_send_reset(priv); |
| 1164 | msleep(20); |
| 1165 | usbhs_bus_send_sof_enable(priv); |
| 1166 | |
| 1167 | for (i = 0; i < timeout ; i++) { |
| 1168 | switch (usbhs_bus_get_speed(priv)) { |
| 1169 | case USB_SPEED_LOW: |
| 1170 | speed = USB_PORT_STAT_LOW_SPEED; |
| 1171 | goto got_usb_bus_speed; |
| 1172 | case USB_SPEED_HIGH: |
| 1173 | speed = USB_PORT_STAT_HIGH_SPEED; |
| 1174 | goto got_usb_bus_speed; |
| 1175 | case USB_SPEED_FULL: |
| 1176 | speed = 0; |
| 1177 | goto got_usb_bus_speed; |
| 1178 | } |
| 1179 | |
| 1180 | msleep(20); |
| 1181 | } |
| 1182 | return -EPIPE; |
| 1183 | |
| 1184 | got_usb_bus_speed: |
| 1185 | usbhsh_port_stat_set(hpriv, speed); |
| 1186 | usbhsh_port_stat_set(hpriv, USB_PORT_STAT_ENABLE); |
| 1187 | |
| 1188 | dev_dbg(dev, "%s :: USB_PORT_FEAT_RESET (speed = %d)\n", |
| 1189 | __func__, speed); |
| 1190 | |
| 1191 | /* status change is not needed */ |
| 1192 | return 0; |
| 1193 | |
| 1194 | default: |
| 1195 | return -EPIPE; |
| 1196 | } |
| 1197 | |
| 1198 | /* set/clear status */ |
| 1199 | if (enable) |
| 1200 | usbhsh_port_stat_set(hpriv, (1 << wValue)); |
| 1201 | else |
| 1202 | usbhsh_port_stat_clear(hpriv, (1 << wValue)); |
| 1203 | |
| 1204 | return 0; |
| 1205 | } |
| 1206 | |
| 1207 | static int __usbhsh_hub_get_status(struct usbhsh_hpriv *hpriv, |
| 1208 | u16 typeReq, u16 wValue, |
| 1209 | u16 wIndex, char *buf, u16 wLength) |
| 1210 | { |
| 1211 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 1212 | struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf; |
| 1213 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1214 | int roothub_id = 1; /* only 1 root hub */ |
| 1215 | |
| 1216 | switch (typeReq) { |
| 1217 | case GetHubStatus: |
| 1218 | dev_dbg(dev, "%s :: GetHubStatus\n", __func__); |
| 1219 | |
| 1220 | *buf = 0x00; |
| 1221 | break; |
| 1222 | |
| 1223 | case GetPortStatus: |
| 1224 | if (wIndex != roothub_id) |
| 1225 | return -EPIPE; |
| 1226 | |
| 1227 | dev_dbg(dev, "%s :: GetPortStatus\n", __func__); |
| 1228 | *(__le32 *)buf = cpu_to_le32(usbhsh_port_stat_get(hpriv)); |
| 1229 | break; |
| 1230 | |
| 1231 | case GetHubDescriptor: |
| 1232 | desc->bDescriptorType = 0x29; |
| 1233 | desc->bHubContrCurrent = 0; |
| 1234 | desc->bNbrPorts = roothub_id; |
| 1235 | desc->bDescLength = 9; |
| 1236 | desc->bPwrOn2PwrGood = 0; |
| 1237 | desc->wHubCharacteristics = cpu_to_le16(0x0011); |
| 1238 | desc->u.hs.DeviceRemovable[0] = (roothub_id << 1); |
| 1239 | desc->u.hs.DeviceRemovable[1] = ~0; |
| 1240 | dev_dbg(dev, "%s :: GetHubDescriptor\n", __func__); |
| 1241 | break; |
| 1242 | } |
| 1243 | |
| 1244 | return 0; |
| 1245 | } |
| 1246 | |
| 1247 | static int usbhsh_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, |
| 1248 | u16 wIndex, char *buf, u16 wLength) |
| 1249 | { |
| 1250 | struct usbhsh_hpriv *hpriv = usbhsh_hcd_to_hpriv(hcd); |
| 1251 | struct usbhs_priv *priv = usbhsh_hpriv_to_priv(hpriv); |
| 1252 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1253 | int ret = -EPIPE; |
| 1254 | |
| 1255 | switch (typeReq) { |
| 1256 | |
| 1257 | /* Hub Feature */ |
| 1258 | case ClearHubFeature: |
| 1259 | case SetHubFeature: |
| 1260 | ret = __usbhsh_hub_hub_feature(hpriv, typeReq, |
| 1261 | wValue, wIndex, buf, wLength); |
| 1262 | break; |
| 1263 | |
| 1264 | /* Port Feature */ |
| 1265 | case SetPortFeature: |
| 1266 | case ClearPortFeature: |
| 1267 | ret = __usbhsh_hub_port_feature(hpriv, typeReq, |
| 1268 | wValue, wIndex, buf, wLength); |
| 1269 | break; |
| 1270 | |
| 1271 | /* Get status */ |
| 1272 | case GetHubStatus: |
| 1273 | case GetPortStatus: |
| 1274 | case GetHubDescriptor: |
| 1275 | ret = __usbhsh_hub_get_status(hpriv, typeReq, |
| 1276 | wValue, wIndex, buf, wLength); |
| 1277 | break; |
| 1278 | } |
| 1279 | |
| 1280 | dev_dbg(dev, "typeReq = %x, ret = %d, port_stat = %x\n", |
| 1281 | typeReq, ret, usbhsh_port_stat_get(hpriv)); |
| 1282 | |
| 1283 | return ret; |
| 1284 | } |
| 1285 | |
Kuninori Morimoto | e7ae64c | 2012-08-05 22:44:07 -0700 | [diff] [blame] | 1286 | static int usbhsh_bus_nop(struct usb_hcd *hcd) |
| 1287 | { |
| 1288 | /* nothing to do */ |
| 1289 | return 0; |
| 1290 | } |
| 1291 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1292 | static struct hc_driver usbhsh_driver = { |
| 1293 | .description = usbhsh_hcd_name, |
| 1294 | .hcd_priv_size = sizeof(struct usbhsh_hpriv), |
| 1295 | |
| 1296 | /* |
| 1297 | * generic hardware linkage |
| 1298 | */ |
| 1299 | .flags = HCD_USB2, |
| 1300 | |
| 1301 | .start = usbhsh_host_start, |
| 1302 | .stop = usbhsh_host_stop, |
| 1303 | |
| 1304 | /* |
| 1305 | * managing i/o requests and associated device resources |
| 1306 | */ |
| 1307 | .urb_enqueue = usbhsh_urb_enqueue, |
| 1308 | .urb_dequeue = usbhsh_urb_dequeue, |
| 1309 | .endpoint_disable = usbhsh_endpoint_disable, |
| 1310 | |
| 1311 | /* |
| 1312 | * root hub |
| 1313 | */ |
| 1314 | .hub_status_data = usbhsh_hub_status_data, |
| 1315 | .hub_control = usbhsh_hub_control, |
Kuninori Morimoto | e7ae64c | 2012-08-05 22:44:07 -0700 | [diff] [blame] | 1316 | .bus_suspend = usbhsh_bus_nop, |
| 1317 | .bus_resume = usbhsh_bus_nop, |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1318 | }; |
| 1319 | |
| 1320 | /* |
| 1321 | * interrupt functions |
| 1322 | */ |
| 1323 | static int usbhsh_irq_attch(struct usbhs_priv *priv, |
| 1324 | struct usbhs_irq_state *irq_state) |
| 1325 | { |
| 1326 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
| 1327 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1328 | |
| 1329 | dev_dbg(dev, "device attached\n"); |
| 1330 | |
| 1331 | usbhsh_port_stat_set(hpriv, USB_PORT_STAT_CONNECTION); |
| 1332 | usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16); |
| 1333 | |
Kuninori Morimoto | 31e00fd | 2011-12-08 18:29:22 -0800 | [diff] [blame] | 1334 | /* |
| 1335 | * attch interrupt might happen infinitely on some device |
| 1336 | * (on self power USB hub ?) |
| 1337 | * disable it here. |
Kuninori Morimoto | b1930da | 2011-12-08 18:30:23 -0800 | [diff] [blame] | 1338 | * |
| 1339 | * usbhsh_is_running() becomes effective |
| 1340 | * according to this process. |
| 1341 | * see |
| 1342 | * usbhsh_is_running() |
| 1343 | * usbhsh_urb_enqueue() |
Kuninori Morimoto | 31e00fd | 2011-12-08 18:29:22 -0800 | [diff] [blame] | 1344 | */ |
| 1345 | hpriv->mod.irq_attch = NULL; |
| 1346 | usbhs_irq_callback_update(priv, &hpriv->mod); |
| 1347 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1348 | return 0; |
| 1349 | } |
| 1350 | |
| 1351 | static int usbhsh_irq_dtch(struct usbhs_priv *priv, |
| 1352 | struct usbhs_irq_state *irq_state) |
| 1353 | { |
| 1354 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
| 1355 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1356 | |
| 1357 | dev_dbg(dev, "device detached\n"); |
| 1358 | |
| 1359 | usbhsh_port_stat_clear(hpriv, USB_PORT_STAT_CONNECTION); |
| 1360 | usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16); |
| 1361 | |
Kuninori Morimoto | 31e00fd | 2011-12-08 18:29:22 -0800 | [diff] [blame] | 1362 | /* |
| 1363 | * enable attch interrupt again |
Kuninori Morimoto | b1930da | 2011-12-08 18:30:23 -0800 | [diff] [blame] | 1364 | * |
| 1365 | * usbhsh_is_running() becomes invalid |
| 1366 | * according to this process. |
| 1367 | * see |
| 1368 | * usbhsh_is_running() |
| 1369 | * usbhsh_urb_enqueue() |
Kuninori Morimoto | 31e00fd | 2011-12-08 18:29:22 -0800 | [diff] [blame] | 1370 | */ |
| 1371 | hpriv->mod.irq_attch = usbhsh_irq_attch; |
| 1372 | usbhs_irq_callback_update(priv, &hpriv->mod); |
| 1373 | |
Kuninori Morimoto | 2d833fa | 2011-12-08 18:31:37 -0800 | [diff] [blame] | 1374 | /* |
| 1375 | * usbhsh_queue_force_pop_all() should be called |
| 1376 | * after usbhsh_is_running() becomes invalid. |
| 1377 | */ |
| 1378 | usbhsh_queue_force_pop_all(priv); |
| 1379 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1380 | return 0; |
| 1381 | } |
| 1382 | |
| 1383 | static int usbhsh_irq_setup_ack(struct usbhs_priv *priv, |
| 1384 | struct usbhs_irq_state *irq_state) |
| 1385 | { |
| 1386 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
| 1387 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1388 | |
| 1389 | dev_dbg(dev, "setup packet OK\n"); |
| 1390 | |
Kuninori Morimoto | 7fccd48 | 2011-10-23 22:55:54 -0700 | [diff] [blame] | 1391 | complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1392 | |
| 1393 | return 0; |
| 1394 | } |
| 1395 | |
| 1396 | static int usbhsh_irq_setup_err(struct usbhs_priv *priv, |
| 1397 | struct usbhs_irq_state *irq_state) |
| 1398 | { |
| 1399 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
| 1400 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1401 | |
| 1402 | dev_dbg(dev, "setup packet Err\n"); |
| 1403 | |
Kuninori Morimoto | 7fccd48 | 2011-10-23 22:55:54 -0700 | [diff] [blame] | 1404 | complete(&hpriv->setup_ack_done); /* see usbhsh_urb_enqueue() */ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1405 | |
| 1406 | return 0; |
| 1407 | } |
| 1408 | |
| 1409 | /* |
| 1410 | * module start/stop |
| 1411 | */ |
| 1412 | static void usbhsh_pipe_init_for_host(struct usbhs_priv *priv) |
| 1413 | { |
| 1414 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1415 | struct usbhs_pipe *pipe; |
| 1416 | u32 *pipe_type = usbhs_get_dparam(priv, pipe_type); |
| 1417 | int pipe_size = usbhs_get_dparam(priv, pipe_size); |
| 1418 | int old_type, dir_in, i; |
| 1419 | |
| 1420 | /* init all pipe */ |
| 1421 | old_type = USB_ENDPOINT_XFER_CONTROL; |
| 1422 | for (i = 0; i < pipe_size; i++) { |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1423 | |
| 1424 | /* |
| 1425 | * data "output" will be finished as soon as possible, |
| 1426 | * but there is no guaranty at data "input" case. |
| 1427 | * |
| 1428 | * "input" needs "standby" pipe. |
| 1429 | * So, "input" direction pipe > "output" direction pipe |
| 1430 | * is good idea. |
| 1431 | * |
| 1432 | * 1st USB_ENDPOINT_XFER_xxx will be output direction, |
| 1433 | * and the other will be input direction here. |
| 1434 | * |
| 1435 | * ex) |
| 1436 | * ... |
| 1437 | * USB_ENDPOINT_XFER_ISOC -> dir out |
| 1438 | * USB_ENDPOINT_XFER_ISOC -> dir in |
| 1439 | * USB_ENDPOINT_XFER_BULK -> dir out |
| 1440 | * USB_ENDPOINT_XFER_BULK -> dir in |
| 1441 | * USB_ENDPOINT_XFER_BULK -> dir in |
| 1442 | * ... |
| 1443 | */ |
| 1444 | dir_in = (pipe_type[i] == old_type); |
| 1445 | old_type = pipe_type[i]; |
| 1446 | |
| 1447 | if (USB_ENDPOINT_XFER_CONTROL == pipe_type[i]) { |
| 1448 | pipe = usbhs_dcp_malloc(priv); |
| 1449 | usbhsh_hpriv_to_dcp(hpriv) = pipe; |
| 1450 | } else { |
| 1451 | pipe = usbhs_pipe_malloc(priv, |
| 1452 | pipe_type[i], |
| 1453 | dir_in); |
| 1454 | } |
| 1455 | |
Kuninori Morimoto | e5679d0 | 2011-12-08 18:28:24 -0800 | [diff] [blame] | 1456 | pipe->mod_private = NULL; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1457 | } |
| 1458 | } |
| 1459 | |
| 1460 | static int usbhsh_start(struct usbhs_priv *priv) |
| 1461 | { |
| 1462 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
| 1463 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); |
| 1464 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
| 1465 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1466 | int ret; |
| 1467 | |
| 1468 | /* add hcd */ |
| 1469 | ret = usb_add_hcd(hcd, 0, 0); |
| 1470 | if (ret < 0) |
| 1471 | return 0; |
Peter Chen | 3c9740a | 2013-11-05 10:46:02 +0800 | [diff] [blame^] | 1472 | device_wakeup_enable(hcd->self.controller); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1473 | |
| 1474 | /* |
| 1475 | * pipe initialize and enable DCP |
| 1476 | */ |
| 1477 | usbhs_pipe_init(priv, |
| 1478 | usbhsh_dma_map_ctrl); |
| 1479 | usbhs_fifo_init(priv); |
| 1480 | usbhsh_pipe_init_for_host(priv); |
| 1481 | |
| 1482 | /* |
| 1483 | * system config enble |
| 1484 | * - HI speed |
| 1485 | * - host |
| 1486 | * - usb module |
| 1487 | */ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1488 | usbhs_sys_host_ctrl(priv, 1); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1489 | |
| 1490 | /* |
| 1491 | * enable irq callback |
| 1492 | */ |
| 1493 | mod->irq_attch = usbhsh_irq_attch; |
| 1494 | mod->irq_dtch = usbhsh_irq_dtch; |
| 1495 | mod->irq_sack = usbhsh_irq_setup_ack; |
| 1496 | mod->irq_sign = usbhsh_irq_setup_err; |
| 1497 | usbhs_irq_callback_update(priv, mod); |
| 1498 | |
| 1499 | dev_dbg(dev, "start host\n"); |
| 1500 | |
| 1501 | return ret; |
| 1502 | } |
| 1503 | |
| 1504 | static int usbhsh_stop(struct usbhs_priv *priv) |
| 1505 | { |
| 1506 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
| 1507 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); |
Kuninori Morimoto | 146ee50 | 2011-10-24 02:25:07 -0700 | [diff] [blame] | 1508 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1509 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1510 | |
Kuninori Morimoto | 146ee50 | 2011-10-24 02:25:07 -0700 | [diff] [blame] | 1511 | /* |
| 1512 | * disable irq callback |
| 1513 | */ |
| 1514 | mod->irq_attch = NULL; |
| 1515 | mod->irq_dtch = NULL; |
| 1516 | mod->irq_sack = NULL; |
| 1517 | mod->irq_sign = NULL; |
| 1518 | usbhs_irq_callback_update(priv, mod); |
| 1519 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1520 | usb_remove_hcd(hcd); |
| 1521 | |
| 1522 | /* disable sys */ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1523 | usbhs_sys_host_ctrl(priv, 0); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1524 | |
| 1525 | dev_dbg(dev, "quit host\n"); |
| 1526 | |
| 1527 | return 0; |
| 1528 | } |
| 1529 | |
Kuninori Morimoto | b7a8d17 | 2011-10-26 19:33:49 -0700 | [diff] [blame] | 1530 | int usbhs_mod_host_probe(struct usbhs_priv *priv) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1531 | { |
| 1532 | struct usbhsh_hpriv *hpriv; |
| 1533 | struct usb_hcd *hcd; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1534 | struct usbhsh_device *udev; |
| 1535 | struct device *dev = usbhs_priv_to_dev(priv); |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1536 | int i; |
| 1537 | |
| 1538 | /* initialize hcd */ |
| 1539 | hcd = usb_create_hcd(&usbhsh_driver, dev, usbhsh_hcd_name); |
| 1540 | if (!hcd) { |
| 1541 | dev_err(dev, "Failed to create hcd\n"); |
| 1542 | return -ENOMEM; |
| 1543 | } |
Kuninori Morimoto | 1115b9e | 2011-12-08 18:24:47 -0800 | [diff] [blame] | 1544 | hcd->has_tt = 1; /* for low/full speed */ |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1545 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1546 | /* |
| 1547 | * CAUTION |
| 1548 | * |
| 1549 | * There is no guarantee that it is possible to access usb module here. |
| 1550 | * Don't accesses to it. |
| 1551 | * The accesse will be enable after "usbhsh_start" |
| 1552 | */ |
| 1553 | |
| 1554 | hpriv = usbhsh_hcd_to_hpriv(hcd); |
| 1555 | |
| 1556 | /* |
| 1557 | * register itself |
| 1558 | */ |
| 1559 | usbhs_mod_register(priv, &hpriv->mod, USBHS_HOST); |
| 1560 | |
| 1561 | /* init hpriv */ |
| 1562 | hpriv->mod.name = "host"; |
| 1563 | hpriv->mod.start = usbhsh_start; |
| 1564 | hpriv->mod.stop = usbhsh_stop; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1565 | usbhsh_port_stat_init(hpriv); |
| 1566 | |
| 1567 | /* init all device */ |
| 1568 | usbhsh_for_each_udev_with_dev0(udev, hpriv, i) { |
| 1569 | udev->usbv = NULL; |
| 1570 | INIT_LIST_HEAD(&udev->ep_list_head); |
| 1571 | } |
| 1572 | |
| 1573 | dev_info(dev, "host probed\n"); |
| 1574 | |
| 1575 | return 0; |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1576 | } |
| 1577 | |
Kuninori Morimoto | b7a8d17 | 2011-10-26 19:33:49 -0700 | [diff] [blame] | 1578 | int usbhs_mod_host_remove(struct usbhs_priv *priv) |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1579 | { |
| 1580 | struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv); |
| 1581 | struct usb_hcd *hcd = usbhsh_hpriv_to_hcd(hpriv); |
| 1582 | |
Kuninori Morimoto | 034d7c1 | 2011-10-10 22:07:40 -0700 | [diff] [blame] | 1583 | usb_put_hcd(hcd); |
| 1584 | |
| 1585 | return 0; |
| 1586 | } |