blob: 25103a0ef9b384c4c58abf31c2c87a6289c8977a [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001# -*- shell-script -*-
2
3menu "IEEE 1394 (FireWire) support"
4
5config IEEE1394
6 tristate "IEEE 1394 (FireWire) support"
7 depends on PCI || BROKEN
8 select NET
9 help
10 IEEE 1394 describes a high performance serial bus, which is also
11 known as FireWire(tm) or i.Link(tm) and is used for connecting all
12 sorts of devices (most notably digital video cameras) to your
13 computer.
14
15 If you have FireWire hardware and want to use it, say Y here. This
16 is the core support only, you will also need to select a driver for
17 your IEEE 1394 adapter.
18
19 To compile this driver as a module, say M here: the
20 module will be called ieee1394.
21
22comment "Subsystem Options"
23 depends on IEEE1394
24
25config IEEE1394_VERBOSEDEBUG
26 bool "Excessive debugging output"
27 depends on IEEE1394
28 help
29 If you say Y here, you will get very verbose debugging logs from
30 the subsystem which includes a dump of the header of every sent
31 and received packet. This can amount to a high amount of data
32 collected in a very short time which is usually also saved to
33 disk by the system logging daemons.
34
35 Say Y if you really want or need the debugging output, everyone
36 else says N.
37
38config IEEE1394_OUI_DB
39 bool "OUI Database built-in"
40 depends on IEEE1394
41 help
42 If you say Y here, then an OUI list (vendor unique ID's) will be
43 compiled into the ieee1394 module. This doesn't really do much
44 except being able to display the vendor of a hardware node. The
45 downside is that it adds about 300k to the size of the module,
46 or kernel (depending on whether you compile ieee1394 as a
47 module, or static in the kernel).
48
49 This option is not needed for userspace programs like gscanbus
50 to show this information.
51
52config IEEE1394_EXTRA_CONFIG_ROMS
53 bool "Build in extra config rom entries for certain functionality"
54 depends on IEEE1394
55 help
56 Some IEEE1394 functionality depends on extra config rom entries
57 being available in the host adapters CSR. These options will
58 allow you to choose which ones.
59
60config IEEE1394_CONFIG_ROM_IP1394
61 bool "IP-1394 Entry"
62 depends on IEEE1394_EXTRA_CONFIG_ROMS && IEEE1394
63 help
64 Adds an entry for using IP-over-1394. If you want to use your
65 IEEE1394 bus as a network for IP systems (including interacting
66 with MacOSX and WinXP IP-over-1394), enable this option and the
67 eth1394 option below.
68
Ben Collins1934b8b2005-07-09 20:01:23 -040069config IEEE1394_EXPORT_FULL_API
70 bool "Export all symbols of ieee1394's API"
71 depends on IEEE1394
72 default n
73 help
74 Export all symbols of ieee1394's driver programming interface, even
75 those that are not currently used by the standard IEEE 1394 drivers.
76
77 This option does not affect the interface to userspace applications.
78 Say Y here if you want to compile externally developed drivers that
79 make extended use of ieee1394's API. It is otherwise safe to say N.
80
Linus Torvalds1da177e2005-04-16 15:20:36 -070081comment "Device Drivers"
82 depends on IEEE1394
83
84comment "Texas Instruments PCILynx requires I2C"
85 depends on IEEE1394 && I2C=n
86
87config IEEE1394_PCILYNX
88 tristate "Texas Instruments PCILynx support"
89 depends on PCI && IEEE1394 && I2C
90 select I2C_ALGOBIT
91 help
92 Say Y here if you have an IEEE-1394 controller with the Texas
93 Instruments PCILynx chip. Note: this driver is written for revision
94 2 of this chip and may not work with revision 0.
95
96 To compile this driver as a module, say M here: the
97 module will be called pcilynx.
98
Linus Torvalds1da177e2005-04-16 15:20:36 -070099config IEEE1394_OHCI1394
100 tristate "OHCI-1394 support"
101 depends on PCI && IEEE1394
102 help
103 Enable this driver if you have an IEEE 1394 controller based on the
104 OHCI-1394 specification. The current driver is only tested with OHCI
105 chipsets made by Texas Instruments and NEC. Most third-party vendors
106 use one of these chipsets. It should work with any OHCI-1394
107 compliant card, however.
108
109 To compile this driver as a module, say M here: the
110 module will be called ohci1394.
111
112comment "Protocol Drivers"
113 depends on IEEE1394
114
115config IEEE1394_VIDEO1394
116 tristate "OHCI-1394 Video support"
117 depends on IEEE1394 && IEEE1394_OHCI1394
118 help
119 This option enables video device usage for OHCI-1394 cards. Enable
120 this option only if you have an IEEE 1394 video device connected to
121 an OHCI-1394 card.
122
123config IEEE1394_SBP2
124 tristate "SBP-2 support (Harddisks etc.)"
125 depends on IEEE1394 && SCSI && (PCI || BROKEN)
126 help
127 This option enables you to use SBP-2 devices connected to your IEEE
128 1394 bus. SBP-2 devices include harddrives and DVD devices.
129
130config IEEE1394_SBP2_PHYS_DMA
131 bool "Enable Phys DMA support for SBP2 (Debug)"
132 depends on IEEE1394 && IEEE1394_SBP2
133
134config IEEE1394_ETH1394
135 tristate "Ethernet over 1394"
136 depends on IEEE1394 && EXPERIMENTAL && INET
137 select IEEE1394_CONFIG_ROM_IP1394
138 select IEEE1394_EXTRA_CONFIG_ROMS
139 help
140 This driver implements a functional majority of RFC 2734: IPv4 over
141 1394. It will provide IP connectivity with implementations of RFC
142 2734 found on other operating systems. It will not communicate with
143 older versions of this driver found in stock kernels prior to 2.6.3.
144 This driver is still considered experimental. It does not yet support
145 MCAP, therefore multicast support is significantly limited.
146
147config IEEE1394_DV1394
148 tristate "OHCI-DV I/O support"
149 depends on IEEE1394 && IEEE1394_OHCI1394
150 help
151 This driver allows you to transmit and receive DV (digital video)
152 streams on an OHCI-1394 card using a simple frame-oriented
153 interface.
154
155 The user-space API for dv1394 is documented in dv1394.h.
156
157 To compile this driver as a module, say M here: the
158 module will be called dv1394.
159
160config IEEE1394_RAWIO
161 tristate "Raw IEEE1394 I/O support"
162 depends on IEEE1394
163 help
164 Say Y here if you want support for the raw device. This is generally
165 a good idea, so you should say Y here. The raw device enables
166 direct communication of user programs with the IEEE 1394 bus and
167 thus with the attached peripherals.
168
169 To compile this driver as a module, say M here: the
170 module will be called raw1394.
171
172config IEEE1394_CMP
173 tristate "IEC61883-1 Plug support"
174 depends on IEEE1394
175 help
176 This option enables the Connection Management Procedures
177 (IEC61883-1) driver, which implements input and output plugs.
178
179 To compile this driver as a module, say M here: the
180 module will be called cmp.
181
182config IEEE1394_AMDTP
183 tristate "IEC61883-6 (Audio transmission) support"
184 depends on IEEE1394 && IEEE1394_OHCI1394 && IEEE1394_CMP
185 help
186 This option enables the Audio & Music Data Transmission Protocol
187 (IEC61883-6) driver, which implements audio transmission over
188 IEEE1394.
189
190 The userspace interface is documented in amdtp.h.
191
192 To compile this driver as a module, say M here: the
193 module will be called amdtp.
194
195endmenu