Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* linux/drivers/mtd/nand/s3c2410.c |
| 2 | * |
| 3 | * Copyright (c) 2004 Simtec Electronics |
Ben Dooks | fdf2fd5 | 2005-02-18 14:46:15 +0000 | [diff] [blame] | 4 | * http://www.simtec.co.uk/products/SWLINUX/ |
| 5 | * Ben Dooks <ben@simtec.co.uk> |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 6 | * |
| 7 | * Samsung S3C2410 NAND driver |
| 8 | * |
| 9 | * Changelog: |
| 10 | * 21-Sep-2004 BJD Initial version |
| 11 | * 23-Sep-2004 BJD Mulitple device support |
| 12 | * 28-Sep-2004 BJD Fixed ECC placement for Hardware mode |
| 13 | * 12-Oct-2004 BJD Fixed errors in use of platform data |
Ben Dooks | fdf2fd5 | 2005-02-18 14:46:15 +0000 | [diff] [blame] | 14 | * 18-Feb-2004 BJD Fix sparse errors |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 15 | * |
Ben Dooks | fdf2fd5 | 2005-02-18 14:46:15 +0000 | [diff] [blame] | 16 | * $Id: s3c2410.c,v 1.8 2005/02/18 14:46:12 bjd Exp $ |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 17 | * |
| 18 | * This program is free software; you can redistribute it and/or modify |
| 19 | * it under the terms of the GNU General Public License as published by |
| 20 | * the Free Software Foundation; either version 2 of the License, or |
| 21 | * (at your option) any later version. |
| 22 | * |
| 23 | * This program is distributed in the hope that it will be useful, |
| 24 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 25 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 26 | * GNU General Public License for more details. |
| 27 | * |
| 28 | * You should have received a copy of the GNU General Public License |
| 29 | * along with this program; if not, write to the Free Software |
| 30 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 31 | */ |
| 32 | |
| 33 | #include <config/mtd/nand/s3c2410/hwecc.h> |
| 34 | #include <config/mtd/nand/s3c2410/debug.h> |
| 35 | |
| 36 | #ifdef CONFIG_MTD_NAND_S3C2410_DEBUG |
| 37 | #define DEBUG |
| 38 | #endif |
| 39 | |
| 40 | #include <linux/module.h> |
| 41 | #include <linux/types.h> |
| 42 | #include <linux/init.h> |
| 43 | #include <linux/kernel.h> |
| 44 | #include <linux/string.h> |
| 45 | #include <linux/ioport.h> |
| 46 | #include <linux/device.h> |
| 47 | #include <linux/delay.h> |
| 48 | #include <linux/err.h> |
| 49 | |
| 50 | #include <linux/mtd/mtd.h> |
| 51 | #include <linux/mtd/nand.h> |
| 52 | #include <linux/mtd/nand_ecc.h> |
| 53 | #include <linux/mtd/partitions.h> |
| 54 | |
| 55 | #include <asm/io.h> |
| 56 | #include <asm/mach-types.h> |
| 57 | #include <asm/hardware/clock.h> |
| 58 | |
| 59 | #include <asm/arch/regs-nand.h> |
| 60 | #include <asm/arch/nand.h> |
| 61 | |
| 62 | #define PFX "s3c2410-nand: " |
| 63 | |
| 64 | #ifdef CONFIG_MTD_NAND_S3C2410_HWECC |
| 65 | static int hardware_ecc = 1; |
| 66 | #else |
| 67 | static int hardware_ecc = 0; |
| 68 | #endif |
| 69 | |
| 70 | /* new oob placement block for use with hardware ecc generation |
| 71 | */ |
| 72 | |
| 73 | static struct nand_oobinfo nand_hw_eccoob = { |
Ben Dooks | fdf2fd5 | 2005-02-18 14:46:15 +0000 | [diff] [blame] | 74 | .useecc = MTD_NANDECC_AUTOPLACE, |
| 75 | .eccbytes = 3, |
| 76 | .eccpos = {0, 1, 2 }, |
| 77 | .oobfree = { {8, 8} } |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 78 | }; |
| 79 | |
| 80 | /* controller and mtd information */ |
| 81 | |
| 82 | struct s3c2410_nand_info; |
| 83 | |
| 84 | struct s3c2410_nand_mtd { |
| 85 | struct mtd_info mtd; |
| 86 | struct nand_chip chip; |
| 87 | struct s3c2410_nand_set *set; |
| 88 | struct s3c2410_nand_info *info; |
| 89 | int scan_res; |
| 90 | }; |
| 91 | |
| 92 | /* overview of the s3c2410 nand state */ |
| 93 | |
| 94 | struct s3c2410_nand_info { |
| 95 | /* mtd info */ |
| 96 | struct nand_hw_control controller; |
| 97 | struct s3c2410_nand_mtd *mtds; |
| 98 | struct s3c2410_platform_nand *platform; |
| 99 | |
| 100 | /* device info */ |
| 101 | struct device *device; |
| 102 | struct resource *area; |
| 103 | struct clk *clk; |
Ben Dooks | fdf2fd5 | 2005-02-18 14:46:15 +0000 | [diff] [blame] | 104 | void __iomem *regs; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 105 | int mtd_count; |
| 106 | }; |
| 107 | |
| 108 | /* conversion functions */ |
| 109 | |
| 110 | static struct s3c2410_nand_mtd *s3c2410_nand_mtd_toours(struct mtd_info *mtd) |
| 111 | { |
| 112 | return container_of(mtd, struct s3c2410_nand_mtd, mtd); |
| 113 | } |
| 114 | |
| 115 | static struct s3c2410_nand_info *s3c2410_nand_mtd_toinfo(struct mtd_info *mtd) |
| 116 | { |
| 117 | return s3c2410_nand_mtd_toours(mtd)->info; |
| 118 | } |
| 119 | |
| 120 | static struct s3c2410_nand_info *to_nand_info(struct device *dev) |
| 121 | { |
| 122 | return dev_get_drvdata(dev); |
| 123 | } |
| 124 | |
| 125 | static struct s3c2410_platform_nand *to_nand_plat(struct device *dev) |
| 126 | { |
| 127 | return dev->platform_data; |
| 128 | } |
| 129 | |
| 130 | /* timing calculations */ |
| 131 | |
| 132 | #define NS_IN_KHZ 10000000 |
| 133 | |
| 134 | static int s3c2410_nand_calc_rate(int wanted, unsigned long clk, int max) |
| 135 | { |
| 136 | int result; |
| 137 | |
| 138 | result = (wanted * NS_IN_KHZ) / clk; |
| 139 | result++; |
| 140 | |
| 141 | pr_debug("result %d from %ld, %d\n", result, clk, wanted); |
| 142 | |
| 143 | if (result > max) { |
| 144 | printk("%d ns is too big for current clock rate %ld\n", |
| 145 | wanted, clk); |
| 146 | return -1; |
| 147 | } |
| 148 | |
| 149 | if (result < 1) |
| 150 | result = 1; |
| 151 | |
| 152 | return result; |
| 153 | } |
| 154 | |
| 155 | #define to_ns(ticks,clk) (((clk) * (ticks)) / NS_IN_KHZ) |
| 156 | |
| 157 | /* controller setup */ |
| 158 | |
| 159 | static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, |
| 160 | struct device *dev) |
| 161 | { |
| 162 | struct s3c2410_platform_nand *plat = to_nand_plat(dev); |
| 163 | unsigned int tacls, twrph0, twrph1; |
| 164 | unsigned long clkrate = clk_get_rate(info->clk); |
| 165 | unsigned long cfg; |
| 166 | |
| 167 | /* calculate the timing information for the controller */ |
| 168 | |
| 169 | if (plat != NULL) { |
| 170 | tacls = s3c2410_nand_calc_rate(plat->tacls, clkrate, 8); |
| 171 | twrph0 = s3c2410_nand_calc_rate(plat->twrph0, clkrate, 8); |
| 172 | twrph1 = s3c2410_nand_calc_rate(plat->twrph1, clkrate, 8); |
| 173 | } else { |
| 174 | /* default timings */ |
| 175 | tacls = 8; |
| 176 | twrph0 = 8; |
| 177 | twrph1 = 8; |
| 178 | } |
| 179 | |
| 180 | if (tacls < 0 || twrph0 < 0 || twrph1 < 0) { |
| 181 | printk(KERN_ERR PFX "cannot get timings suitable for board\n"); |
| 182 | return -EINVAL; |
| 183 | } |
| 184 | |
| 185 | printk(KERN_INFO PFX "timing: Tacls %ldns, Twrph0 %ldns, Twrph1 %ldns\n", |
| 186 | to_ns(tacls, clkrate), |
| 187 | to_ns(twrph0, clkrate), |
| 188 | to_ns(twrph1, clkrate)); |
| 189 | |
| 190 | cfg = S3C2410_NFCONF_EN; |
| 191 | cfg |= S3C2410_NFCONF_TACLS(tacls-1); |
| 192 | cfg |= S3C2410_NFCONF_TWRPH0(twrph0-1); |
| 193 | cfg |= S3C2410_NFCONF_TWRPH1(twrph1-1); |
| 194 | |
| 195 | pr_debug(PFX "NF_CONF is 0x%lx\n", cfg); |
| 196 | |
| 197 | writel(cfg, info->regs + S3C2410_NFCONF); |
| 198 | return 0; |
| 199 | } |
| 200 | |
| 201 | /* select chip */ |
| 202 | |
| 203 | static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) |
| 204 | { |
| 205 | struct s3c2410_nand_info *info; |
| 206 | struct s3c2410_nand_mtd *nmtd; |
| 207 | struct nand_chip *this = mtd->priv; |
| 208 | unsigned long cur; |
| 209 | |
| 210 | nmtd = this->priv; |
| 211 | info = nmtd->info; |
| 212 | |
| 213 | cur = readl(info->regs + S3C2410_NFCONF); |
| 214 | |
| 215 | if (chip == -1) { |
| 216 | cur |= S3C2410_NFCONF_nFCE; |
| 217 | } else { |
| 218 | if (chip > nmtd->set->nr_chips) { |
| 219 | printk(KERN_ERR PFX "chip %d out of range\n", chip); |
| 220 | return; |
| 221 | } |
| 222 | |
| 223 | if (info->platform != NULL) { |
| 224 | if (info->platform->select_chip != NULL) |
| 225 | (info->platform->select_chip)(nmtd->set, chip); |
| 226 | } |
| 227 | |
| 228 | cur &= ~S3C2410_NFCONF_nFCE; |
| 229 | } |
| 230 | |
| 231 | writel(cur, info->regs + S3C2410_NFCONF); |
| 232 | } |
| 233 | |
| 234 | /* command and control functions */ |
| 235 | |
| 236 | static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd) |
| 237 | { |
| 238 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); |
| 239 | unsigned long cur; |
| 240 | |
| 241 | switch (cmd) { |
| 242 | case NAND_CTL_SETNCE: |
| 243 | cur = readl(info->regs + S3C2410_NFCONF); |
| 244 | cur &= ~S3C2410_NFCONF_nFCE; |
| 245 | writel(cur, info->regs + S3C2410_NFCONF); |
| 246 | break; |
| 247 | |
| 248 | case NAND_CTL_CLRNCE: |
| 249 | cur = readl(info->regs + S3C2410_NFCONF); |
| 250 | cur |= S3C2410_NFCONF_nFCE; |
| 251 | writel(cur, info->regs + S3C2410_NFCONF); |
| 252 | break; |
| 253 | |
| 254 | /* we don't need to implement these */ |
| 255 | case NAND_CTL_SETCLE: |
| 256 | case NAND_CTL_CLRCLE: |
| 257 | case NAND_CTL_SETALE: |
| 258 | case NAND_CTL_CLRALE: |
| 259 | pr_debug(PFX "s3c2410_nand_hwcontrol(%d) unusedn", cmd); |
| 260 | break; |
| 261 | } |
| 262 | } |
| 263 | |
| 264 | /* s3c2410_nand_command |
| 265 | * |
| 266 | * This function implements sending commands and the relevant address |
| 267 | * information to the chip, via the hardware controller. Since the |
| 268 | * S3C2410 generates the correct ALE/CLE signaling automatically, we |
| 269 | * do not need to use hwcontrol. |
| 270 | */ |
| 271 | |
| 272 | static void s3c2410_nand_command (struct mtd_info *mtd, unsigned command, |
| 273 | int column, int page_addr) |
| 274 | { |
| 275 | register struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); |
| 276 | register struct nand_chip *this = mtd->priv; |
| 277 | |
| 278 | /* |
| 279 | * Write out the command to the device. |
| 280 | */ |
| 281 | if (command == NAND_CMD_SEQIN) { |
| 282 | int readcmd; |
| 283 | |
| 284 | if (column >= mtd->oobblock) { |
| 285 | /* OOB area */ |
| 286 | column -= mtd->oobblock; |
| 287 | readcmd = NAND_CMD_READOOB; |
| 288 | } else if (column < 256) { |
| 289 | /* First 256 bytes --> READ0 */ |
| 290 | readcmd = NAND_CMD_READ0; |
| 291 | } else { |
| 292 | column -= 256; |
| 293 | readcmd = NAND_CMD_READ1; |
| 294 | } |
| 295 | |
| 296 | writeb(readcmd, info->regs + S3C2410_NFCMD); |
| 297 | } |
| 298 | writeb(command, info->regs + S3C2410_NFCMD); |
| 299 | |
| 300 | /* Set ALE and clear CLE to start address cycle */ |
| 301 | |
| 302 | if (column != -1 || page_addr != -1) { |
| 303 | |
| 304 | /* Serially input address */ |
| 305 | if (column != -1) { |
| 306 | /* Adjust columns for 16 bit buswidth */ |
| 307 | if (this->options & NAND_BUSWIDTH_16) |
| 308 | column >>= 1; |
| 309 | writeb(column, info->regs + S3C2410_NFADDR); |
| 310 | } |
| 311 | if (page_addr != -1) { |
| 312 | writeb((unsigned char) (page_addr), info->regs + S3C2410_NFADDR); |
| 313 | writeb((unsigned char) (page_addr >> 8), info->regs + S3C2410_NFADDR); |
| 314 | /* One more address cycle for higher density devices */ |
| 315 | if (this->chipsize & 0x0c000000) |
| 316 | writeb((unsigned char) ((page_addr >> 16) & 0x0f), |
| 317 | info->regs + S3C2410_NFADDR); |
| 318 | } |
| 319 | /* Latch in address */ |
| 320 | } |
| 321 | |
| 322 | /* |
| 323 | * program and erase have their own busy handlers |
| 324 | * status and sequential in needs no delay |
| 325 | */ |
| 326 | switch (command) { |
| 327 | |
| 328 | case NAND_CMD_PAGEPROG: |
| 329 | case NAND_CMD_ERASE1: |
| 330 | case NAND_CMD_ERASE2: |
| 331 | case NAND_CMD_SEQIN: |
| 332 | case NAND_CMD_STATUS: |
| 333 | return; |
| 334 | |
| 335 | case NAND_CMD_RESET: |
| 336 | if (this->dev_ready) |
| 337 | break; |
| 338 | |
| 339 | udelay(this->chip_delay); |
| 340 | writeb(NAND_CMD_STATUS, info->regs + S3C2410_NFCMD); |
| 341 | |
| 342 | while ( !(this->read_byte(mtd) & 0x40)); |
| 343 | return; |
| 344 | |
| 345 | /* This applies to read commands */ |
| 346 | default: |
| 347 | /* |
| 348 | * If we don't have access to the busy pin, we apply the given |
| 349 | * command delay |
| 350 | */ |
| 351 | if (!this->dev_ready) { |
| 352 | udelay (this->chip_delay); |
| 353 | return; |
| 354 | } |
| 355 | } |
| 356 | |
| 357 | /* Apply this short delay always to ensure that we do wait tWB in |
| 358 | * any case on any machine. */ |
| 359 | ndelay (100); |
| 360 | /* wait until command is processed */ |
| 361 | while (!this->dev_ready(mtd)); |
| 362 | } |
| 363 | |
| 364 | |
| 365 | /* s3c2410_nand_devready() |
| 366 | * |
| 367 | * returns 0 if the nand is busy, 1 if it is ready |
| 368 | */ |
| 369 | |
| 370 | static int s3c2410_nand_devready(struct mtd_info *mtd) |
| 371 | { |
| 372 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); |
| 373 | |
| 374 | return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY; |
| 375 | } |
| 376 | |
| 377 | /* ECC handling functions */ |
| 378 | |
| 379 | static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, |
| 380 | u_char *read_ecc, u_char *calc_ecc) |
| 381 | { |
| 382 | pr_debug("s3c2410_nand_correct_data(%p,%p,%p,%p)\n", |
| 383 | mtd, dat, read_ecc, calc_ecc); |
| 384 | |
| 385 | pr_debug("eccs: read %02x,%02x,%02x vs calc %02x,%02x,%02x\n", |
| 386 | read_ecc[0], read_ecc[1], read_ecc[2], |
| 387 | calc_ecc[0], calc_ecc[1], calc_ecc[2]); |
| 388 | |
| 389 | if (read_ecc[0] == calc_ecc[0] && |
| 390 | read_ecc[1] == calc_ecc[1] && |
| 391 | read_ecc[2] == calc_ecc[2]) |
| 392 | return 0; |
| 393 | |
| 394 | /* we curently have no method for correcting the error */ |
| 395 | |
| 396 | return -1; |
| 397 | } |
| 398 | |
| 399 | static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) |
| 400 | { |
| 401 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); |
| 402 | unsigned long ctrl; |
| 403 | |
| 404 | ctrl = readl(info->regs + S3C2410_NFCONF); |
| 405 | ctrl |= S3C2410_NFCONF_INITECC; |
| 406 | writel(ctrl, info->regs + S3C2410_NFCONF); |
| 407 | } |
| 408 | |
| 409 | static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, |
| 410 | const u_char *dat, u_char *ecc_code) |
| 411 | { |
| 412 | struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); |
| 413 | |
| 414 | ecc_code[0] = readb(info->regs + S3C2410_NFECC + 0); |
| 415 | ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1); |
| 416 | ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2); |
| 417 | |
| 418 | pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", |
| 419 | ecc_code[0], ecc_code[1], ecc_code[2]); |
| 420 | |
| 421 | return 0; |
| 422 | } |
| 423 | |
| 424 | |
| 425 | /* over-ride the standard functions for a little more speed? */ |
| 426 | |
| 427 | static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) |
| 428 | { |
| 429 | struct nand_chip *this = mtd->priv; |
| 430 | readsb(this->IO_ADDR_R, buf, len); |
| 431 | } |
| 432 | |
| 433 | static void s3c2410_nand_write_buf(struct mtd_info *mtd, |
| 434 | const u_char *buf, int len) |
| 435 | { |
| 436 | struct nand_chip *this = mtd->priv; |
| 437 | writesb(this->IO_ADDR_W, buf, len); |
| 438 | } |
| 439 | |
| 440 | /* device management functions */ |
| 441 | |
| 442 | static int s3c2410_nand_remove(struct device *dev) |
| 443 | { |
| 444 | struct s3c2410_nand_info *info = to_nand_info(dev); |
| 445 | |
| 446 | dev_set_drvdata(dev, NULL); |
| 447 | |
| 448 | if (info == NULL) |
| 449 | return 0; |
| 450 | |
| 451 | /* first thing we need to do is release all our mtds |
| 452 | * and their partitions, then go through freeing the |
| 453 | * resources used |
| 454 | */ |
| 455 | |
| 456 | if (info->mtds != NULL) { |
| 457 | struct s3c2410_nand_mtd *ptr = info->mtds; |
| 458 | int mtdno; |
| 459 | |
| 460 | for (mtdno = 0; mtdno < info->mtd_count; mtdno++, ptr++) { |
| 461 | pr_debug("releasing mtd %d (%p)\n", mtdno, ptr); |
| 462 | nand_release(&ptr->mtd); |
| 463 | } |
| 464 | |
| 465 | kfree(info->mtds); |
| 466 | } |
| 467 | |
| 468 | /* free the common resources */ |
| 469 | |
| 470 | if (info->clk != NULL && !IS_ERR(info->clk)) { |
| 471 | clk_disable(info->clk); |
| 472 | clk_unuse(info->clk); |
| 473 | clk_put(info->clk); |
| 474 | } |
| 475 | |
| 476 | if (info->regs != NULL) { |
| 477 | iounmap(info->regs); |
| 478 | info->regs = NULL; |
| 479 | } |
| 480 | |
| 481 | if (info->area != NULL) { |
| 482 | release_resource(info->area); |
| 483 | kfree(info->area); |
| 484 | info->area = NULL; |
| 485 | } |
| 486 | |
| 487 | kfree(info); |
| 488 | |
| 489 | return 0; |
| 490 | } |
| 491 | |
| 492 | #ifdef CONFIG_MTD_PARTITIONS |
| 493 | static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, |
| 494 | struct s3c2410_nand_mtd *mtd, |
| 495 | struct s3c2410_nand_set *set) |
| 496 | { |
| 497 | if (set == NULL) |
| 498 | return add_mtd_device(&mtd->mtd); |
| 499 | |
| 500 | if (set->nr_partitions > 0 && set->partitions != NULL) { |
| 501 | return add_mtd_partitions(&mtd->mtd, |
| 502 | set->partitions, |
| 503 | set->nr_partitions); |
| 504 | } |
| 505 | |
| 506 | return add_mtd_device(&mtd->mtd); |
| 507 | } |
| 508 | #else |
| 509 | static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, |
| 510 | struct s3c2410_nand_mtd *mtd, |
| 511 | struct s3c2410_nand_set *set) |
| 512 | { |
| 513 | return add_mtd_device(&mtd->mtd); |
| 514 | } |
| 515 | #endif |
| 516 | |
| 517 | /* s3c2410_nand_init_chip |
| 518 | * |
| 519 | * init a single instance of an chip |
| 520 | */ |
| 521 | |
| 522 | static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, |
| 523 | struct s3c2410_nand_mtd *nmtd, |
| 524 | struct s3c2410_nand_set *set) |
| 525 | { |
| 526 | struct nand_chip *chip = &nmtd->chip; |
| 527 | |
Ben Dooks | fdf2fd5 | 2005-02-18 14:46:15 +0000 | [diff] [blame] | 528 | chip->IO_ADDR_R = info->regs + S3C2410_NFDATA; |
| 529 | chip->IO_ADDR_W = info->regs + S3C2410_NFDATA; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 530 | chip->hwcontrol = s3c2410_nand_hwcontrol; |
| 531 | chip->dev_ready = s3c2410_nand_devready; |
| 532 | chip->cmdfunc = s3c2410_nand_command; |
| 533 | chip->write_buf = s3c2410_nand_write_buf; |
| 534 | chip->read_buf = s3c2410_nand_read_buf; |
| 535 | chip->select_chip = s3c2410_nand_select_chip; |
| 536 | chip->chip_delay = 50; |
| 537 | chip->priv = nmtd; |
| 538 | chip->options = 0; |
| 539 | chip->controller = &info->controller; |
| 540 | |
| 541 | nmtd->info = info; |
| 542 | nmtd->mtd.priv = chip; |
| 543 | nmtd->set = set; |
| 544 | |
| 545 | if (hardware_ecc) { |
| 546 | chip->correct_data = s3c2410_nand_correct_data; |
| 547 | chip->enable_hwecc = s3c2410_nand_enable_hwecc; |
| 548 | chip->calculate_ecc = s3c2410_nand_calculate_ecc; |
| 549 | chip->eccmode = NAND_ECC_HW3_512; |
| 550 | chip->autooob = &nand_hw_eccoob; |
| 551 | } else { |
| 552 | chip->eccmode = NAND_ECC_SOFT; |
| 553 | } |
| 554 | } |
| 555 | |
| 556 | /* s3c2410_nand_probe |
| 557 | * |
| 558 | * called by device layer when it finds a device matching |
| 559 | * one our driver can handled. This code checks to see if |
| 560 | * it can allocate all necessary resources then calls the |
| 561 | * nand layer to look for devices |
| 562 | */ |
| 563 | |
| 564 | static int s3c2410_nand_probe(struct device *dev) |
| 565 | { |
| 566 | struct platform_device *pdev = to_platform_device(dev); |
| 567 | struct s3c2410_platform_nand *plat = to_nand_plat(dev); |
| 568 | struct s3c2410_nand_info *info; |
| 569 | struct s3c2410_nand_mtd *nmtd; |
| 570 | struct s3c2410_nand_set *sets; |
| 571 | struct resource *res; |
| 572 | int err = 0; |
| 573 | int size; |
| 574 | int nr_sets; |
| 575 | int setno; |
| 576 | |
| 577 | pr_debug("s3c2410_nand_probe(%p)\n", dev); |
| 578 | |
| 579 | info = kmalloc(sizeof(*info), GFP_KERNEL); |
| 580 | if (info == NULL) { |
| 581 | printk(KERN_ERR PFX "no memory for flash info\n"); |
| 582 | err = -ENOMEM; |
| 583 | goto exit_error; |
| 584 | } |
| 585 | |
| 586 | memzero(info, sizeof(*info)); |
| 587 | dev_set_drvdata(dev, info); |
| 588 | |
| 589 | spin_lock_init(&info->controller.lock); |
| 590 | |
| 591 | /* get the clock source and enable it */ |
| 592 | |
| 593 | info->clk = clk_get(dev, "nand"); |
| 594 | if (IS_ERR(info->clk)) { |
| 595 | printk(KERN_ERR PFX "failed to get clock"); |
| 596 | err = -ENOENT; |
| 597 | goto exit_error; |
| 598 | } |
| 599 | |
| 600 | clk_use(info->clk); |
| 601 | clk_enable(info->clk); |
| 602 | |
| 603 | /* allocate and map the resource */ |
| 604 | |
| 605 | res = pdev->resource; /* assume that the flash has one resource */ |
| 606 | size = res->end - res->start + 1; |
| 607 | |
| 608 | info->area = request_mem_region(res->start, size, pdev->name); |
| 609 | |
| 610 | if (info->area == NULL) { |
| 611 | printk(KERN_ERR PFX "cannot reserve register region\n"); |
| 612 | err = -ENOENT; |
| 613 | goto exit_error; |
| 614 | } |
| 615 | |
| 616 | info->device = dev; |
| 617 | info->platform = plat; |
| 618 | info->regs = ioremap(res->start, size); |
| 619 | |
| 620 | if (info->regs == NULL) { |
| 621 | printk(KERN_ERR PFX "cannot reserve register region\n"); |
| 622 | err = -EIO; |
| 623 | goto exit_error; |
| 624 | } |
| 625 | |
| 626 | printk(KERN_INFO PFX "mapped registers at %p\n", info->regs); |
| 627 | |
| 628 | /* initialise the hardware */ |
| 629 | |
| 630 | err = s3c2410_nand_inithw(info, dev); |
| 631 | if (err != 0) |
| 632 | goto exit_error; |
| 633 | |
| 634 | sets = (plat != NULL) ? plat->sets : NULL; |
| 635 | nr_sets = (plat != NULL) ? plat->nr_sets : 1; |
| 636 | |
| 637 | info->mtd_count = nr_sets; |
| 638 | |
| 639 | /* allocate our information */ |
| 640 | |
| 641 | size = nr_sets * sizeof(*info->mtds); |
| 642 | info->mtds = kmalloc(size, GFP_KERNEL); |
| 643 | if (info->mtds == NULL) { |
| 644 | printk(KERN_ERR PFX "failed to allocate mtd storage\n"); |
| 645 | err = -ENOMEM; |
| 646 | goto exit_error; |
| 647 | } |
| 648 | |
| 649 | memzero(info->mtds, size); |
| 650 | |
| 651 | /* initialise all possible chips */ |
| 652 | |
| 653 | nmtd = info->mtds; |
| 654 | |
| 655 | for (setno = 0; setno < nr_sets; setno++, nmtd++) { |
| 656 | pr_debug("initialising set %d (%p, info %p)\n", |
| 657 | setno, nmtd, info); |
| 658 | |
| 659 | s3c2410_nand_init_chip(info, nmtd, sets); |
| 660 | |
| 661 | nmtd->scan_res = nand_scan(&nmtd->mtd, |
| 662 | (sets) ? sets->nr_chips : 1); |
| 663 | |
| 664 | if (nmtd->scan_res == 0) { |
| 665 | s3c2410_nand_add_partition(info, nmtd, sets); |
| 666 | } |
| 667 | |
| 668 | if (sets != NULL) |
| 669 | sets++; |
| 670 | } |
| 671 | |
| 672 | pr_debug("initialised ok\n"); |
| 673 | return 0; |
| 674 | |
| 675 | exit_error: |
| 676 | s3c2410_nand_remove(dev); |
| 677 | |
| 678 | if (err == 0) |
| 679 | err = -EINVAL; |
| 680 | return err; |
| 681 | } |
| 682 | |
| 683 | static struct device_driver s3c2410_nand_driver = { |
| 684 | .name = "s3c2410-nand", |
| 685 | .bus = &platform_bus_type, |
| 686 | .probe = s3c2410_nand_probe, |
| 687 | .remove = s3c2410_nand_remove, |
| 688 | }; |
| 689 | |
| 690 | static int __init s3c2410_nand_init(void) |
| 691 | { |
| 692 | printk("S3C2410 NAND Driver, (c) 2004 Simtec Electronics\n"); |
| 693 | return driver_register(&s3c2410_nand_driver); |
| 694 | } |
| 695 | |
| 696 | static void __exit s3c2410_nand_exit(void) |
| 697 | { |
| 698 | driver_unregister(&s3c2410_nand_driver); |
| 699 | } |
| 700 | |
| 701 | module_init(s3c2410_nand_init); |
| 702 | module_exit(s3c2410_nand_exit); |
| 703 | |
| 704 | MODULE_LICENSE("GPL"); |
| 705 | MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); |
| 706 | MODULE_DESCRIPTION("S3C2410 MTD NAND driver"); |