blob: ad660350c29603524ee396a1a6f47833061e0573 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Uwe Zeisbergerf30c2262006-10-03 23:01:26 +02002 * arch/arm/mach-sa1100/dma.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * Support functions for the SA11x0 internal DMA channels.
5 *
6 * Copyright (C) 2000, 2001 by Nicolas Pitre
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13#include <linux/module.h>
14#include <linux/interrupt.h>
15#include <linux/init.h>
16#include <linux/spinlock.h>
17#include <linux/errno.h>
18
19#include <asm/system.h>
20#include <asm/irq.h>
Russell Kinga09e64f2008-08-05 16:14:15 +010021#include <mach/hardware.h>
Russell Kingdcea83a2008-11-29 11:40:28 +000022#include <mach/dma.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070023
24
25#undef DEBUG
26#ifdef DEBUG
27#define DPRINTK( s, arg... ) printk( "dma<%p>: " s, regs , ##arg )
28#else
29#define DPRINTK( x... )
30#endif
31
32
33typedef struct {
34 const char *device_id; /* device name */
35 u_long device; /* this channel device, 0 if unused*/
36 dma_callback_t callback; /* to call when DMA completes */
37 void *data; /* ... with private data ptr */
38} sa1100_dma_t;
39
40static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
41
Dmitry Artamonow4275c132009-09-19 05:58:54 +010042static DEFINE_SPINLOCK(dma_list_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -070043
44
Linus Torvalds0cd61b62006-10-06 10:53:39 -070045static irqreturn_t dma_irq_handler(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -070046{
47 dma_regs_t *dma_regs = dev_id;
48 sa1100_dma_t *dma = dma_chan + (((u_int)dma_regs >> 5) & 7);
49 int status = dma_regs->RdDCSR;
50
51 if (status & (DCSR_ERROR)) {
52 printk(KERN_CRIT "DMA on \"%s\" caused an error\n", dma->device_id);
53 dma_regs->ClrDCSR = DCSR_ERROR;
54 }
55
56 dma_regs->ClrDCSR = status & (DCSR_DONEA | DCSR_DONEB);
57 if (dma->callback) {
58 if (status & DCSR_DONEA)
59 dma->callback(dma->data);
60 if (status & DCSR_DONEB)
61 dma->callback(dma->data);
62 }
63 return IRQ_HANDLED;
64}
65
66
67/**
André Goddard Rosaaf901ca2009-11-14 13:09:05 -020068 * sa1100_request_dma - allocate one of the SA11x0's DMA channels
Linus Torvalds1da177e2005-04-16 15:20:36 -070069 * @device: The SA11x0 peripheral targeted by this request
70 * @device_id: An ascii name for the claiming device
71 * @callback: Function to be called when the DMA completes
72 * @data: A cookie passed back to the callback function
73 * @dma_regs: Pointer to the location of the allocated channel's identifier
74 *
75 * This function will search for a free DMA channel and returns the
76 * address of the hardware registers for that channel as the channel
77 * identifier. This identifier is written to the location pointed by
78 * @dma_regs. The list of possible values for @device are listed into
Russell Kinga09e64f2008-08-05 16:14:15 +010079 * arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
Linus Torvalds1da177e2005-04-16 15:20:36 -070080 *
81 * Note that reading from a port and writing to the same port are
82 * actually considered as two different streams requiring separate
83 * DMA registrations.
84 *
85 * The @callback function is called from interrupt context when one
86 * of the two possible DMA buffers in flight has terminated. That
87 * function has to be small and efficient while posponing more complex
88 * processing to a lower priority execution context.
89 *
90 * If no channels are available, or if the desired @device is already in
91 * use by another DMA channel, then an error code is returned. This
92 * function must be called before any other DMA calls.
93 **/
94
95int sa1100_request_dma (dma_device_t device, const char *device_id,
96 dma_callback_t callback, void *data,
97 dma_regs_t **dma_regs)
98{
99 sa1100_dma_t *dma = NULL;
100 dma_regs_t *regs;
101 int i, err;
102
103 *dma_regs = NULL;
104
105 err = 0;
106 spin_lock(&dma_list_lock);
107 for (i = 0; i < SA1100_DMA_CHANNELS; i++) {
108 if (dma_chan[i].device == device) {
109 err = -EBUSY;
110 break;
111 } else if (!dma_chan[i].device && !dma) {
112 dma = &dma_chan[i];
113 }
114 }
115 if (!err) {
Kristoffer Ericson93982532008-11-26 20:58:43 +0100116 if (dma)
117 dma->device = device;
118 else
119 err = -ENOSR;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700120 }
121 spin_unlock(&dma_list_lock);
122 if (err)
123 return err;
124
125 i = dma - dma_chan;
126 regs = (dma_regs_t *)&DDAR(i);
Thomas Gleixner52e405e2006-07-03 02:20:05 +0200127 err = request_irq(IRQ_DMA0 + i, dma_irq_handler, IRQF_DISABLED,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700128 device_id, regs);
129 if (err) {
130 printk(KERN_ERR
131 "%s: unable to request IRQ %d for %s\n",
Harvey Harrison8e86f422008-03-04 15:08:02 -0800132 __func__, IRQ_DMA0 + i, device_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700133 dma->device = 0;
134 return err;
135 }
136
137 *dma_regs = regs;
138 dma->device_id = device_id;
139 dma->callback = callback;
140 dma->data = data;
141
142 regs->ClrDCSR =
143 (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
144 DCSR_IE | DCSR_ERROR | DCSR_RUN);
145 regs->DDAR = device;
146
147 return 0;
148}
149
150
151/**
152 * sa1100_free_dma - free a SA11x0 DMA channel
153 * @regs: identifier for the channel to free
154 *
155 * This clears all activities on a given DMA channel and releases it
156 * for future requests. The @regs identifier is provided by a
157 * successful call to sa1100_request_dma().
158 **/
159
160void sa1100_free_dma(dma_regs_t *regs)
161{
162 int i;
163
164 for (i = 0; i < SA1100_DMA_CHANNELS; i++)
165 if (regs == (dma_regs_t *)&DDAR(i))
166 break;
167 if (i >= SA1100_DMA_CHANNELS) {
Harvey Harrison8e86f422008-03-04 15:08:02 -0800168 printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700169 return;
170 }
171
172 if (!dma_chan[i].device) {
Harvey Harrison8e86f422008-03-04 15:08:02 -0800173 printk(KERN_ERR "%s: Trying to free free DMA\n", __func__);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700174 return;
175 }
176
177 regs->ClrDCSR =
178 (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
179 DCSR_IE | DCSR_ERROR | DCSR_RUN);
180 free_irq(IRQ_DMA0 + i, regs);
181 dma_chan[i].device = 0;
182}
183
184
185/**
186 * sa1100_start_dma - submit a data buffer for DMA
187 * @regs: identifier for the channel to use
188 * @dma_ptr: buffer physical (or bus) start address
189 * @size: buffer size
190 *
191 * This function hands the given data buffer to the hardware for DMA
192 * access. If another buffer is already in flight then this buffer
193 * will be queued so the DMA engine will switch to it automatically
194 * when the previous one is done. The DMA engine is actually toggling
195 * between two buffers so at most 2 successful calls can be made before
196 * one of them terminates and the callback function is called.
197 *
198 * The @regs identifier is provided by a successful call to
199 * sa1100_request_dma().
200 *
201 * The @size must not be larger than %MAX_DMA_SIZE. If a given buffer
202 * is larger than that then it's the caller's responsibility to split
203 * it into smaller chunks and submit them separately. If this is the
204 * case then a @size of %CUT_DMA_SIZE is recommended to avoid ending
205 * up with too small chunks. The callback function can be used to chain
206 * submissions of buffer chunks.
207 *
208 * Error return values:
209 * %-EOVERFLOW: Given buffer size is too big.
210 * %-EBUSY: Both DMA buffers are already in use.
211 * %-EAGAIN: Both buffers were busy but one of them just completed
212 * but the interrupt handler has to execute first.
213 *
214 * This function returs 0 on success.
215 **/
216
217int sa1100_start_dma(dma_regs_t *regs, dma_addr_t dma_ptr, u_int size)
218{
219 unsigned long flags;
220 u_long status;
221 int ret;
222
223 if (dma_ptr & 3)
224 printk(KERN_WARNING "DMA: unaligned start address (0x%08lx)\n",
225 (unsigned long)dma_ptr);
226
227 if (size > MAX_DMA_SIZE)
228 return -EOVERFLOW;
229
230 local_irq_save(flags);
231 status = regs->RdDCSR;
232
233 /* If both DMA buffers are started, there's nothing else we can do. */
234 if ((status & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) {
235 DPRINTK("start: st %#x busy\n", status);
236 ret = -EBUSY;
237 goto out;
238 }
239
240 if (((status & DCSR_BIU) && (status & DCSR_STRTB)) ||
241 (!(status & DCSR_BIU) && !(status & DCSR_STRTA))) {
242 if (status & DCSR_DONEA) {
243 /* give a chance for the interrupt to be processed */
244 ret = -EAGAIN;
245 goto out;
246 }
247 regs->DBSA = dma_ptr;
248 regs->DBTA = size;
249 regs->SetDCSR = DCSR_STRTA | DCSR_IE | DCSR_RUN;
250 DPRINTK("start a=%#x s=%d on A\n", dma_ptr, size);
251 } else {
252 if (status & DCSR_DONEB) {
253 /* give a chance for the interrupt to be processed */
254 ret = -EAGAIN;
255 goto out;
256 }
257 regs->DBSB = dma_ptr;
258 regs->DBTB = size;
259 regs->SetDCSR = DCSR_STRTB | DCSR_IE | DCSR_RUN;
260 DPRINTK("start a=%#x s=%d on B\n", dma_ptr, size);
261 }
262 ret = 0;
263
264out:
265 local_irq_restore(flags);
266 return ret;
267}
268
269
270/**
271 * sa1100_get_dma_pos - return current DMA position
272 * @regs: identifier for the channel to use
273 *
274 * This function returns the current physical (or bus) address for the
275 * given DMA channel. If the channel is running i.e. not in a stopped
276 * state then the caller must disable interrupts prior calling this
277 * function and process the returned value before re-enabling them to
278 * prevent races with the completion interrupt handler and the callback
279 * function. The validation of the returned value is the caller's
280 * responsibility as well -- the hardware seems to return out of range
281 * values when the DMA engine completes a buffer.
282 *
283 * The @regs identifier is provided by a successful call to
284 * sa1100_request_dma().
285 **/
286
287dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs)
288{
289 int status;
290
291 /*
292 * We must determine whether buffer A or B is active.
293 * Two possibilities: either we are in the middle of
294 * a buffer, or the DMA controller just switched to the
295 * next toggle but the interrupt hasn't been serviced yet.
296 * The former case is straight forward. In the later case,
297 * we'll do like if DMA is just at the end of the previous
298 * toggle since all registers haven't been reset yet.
299 * This goes around the edge case and since we're always
300 * a little behind anyways it shouldn't make a big difference.
301 * If DMA has been stopped prior calling this then the
302 * position is exact.
303 */
304 status = regs->RdDCSR;
305 if ((!(status & DCSR_BIU) && (status & DCSR_STRTA)) ||
306 ( (status & DCSR_BIU) && !(status & DCSR_STRTB)))
307 return regs->DBSA;
308 else
309 return regs->DBSB;
310}
311
312
313/**
314 * sa1100_reset_dma - reset a DMA channel
315 * @regs: identifier for the channel to use
316 *
317 * This function resets and reconfigure the given DMA channel. This is
318 * particularly useful after a sleep/wakeup event.
319 *
320 * The @regs identifier is provided by a successful call to
321 * sa1100_request_dma().
322 **/
323
324void sa1100_reset_dma(dma_regs_t *regs)
325{
326 int i;
327
328 for (i = 0; i < SA1100_DMA_CHANNELS; i++)
329 if (regs == (dma_regs_t *)&DDAR(i))
330 break;
331 if (i >= SA1100_DMA_CHANNELS) {
Harvey Harrison8e86f422008-03-04 15:08:02 -0800332 printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700333 return;
334 }
335
336 regs->ClrDCSR =
337 (DCSR_DONEA | DCSR_DONEB | DCSR_STRTA | DCSR_STRTB |
338 DCSR_IE | DCSR_ERROR | DCSR_RUN);
339 regs->DDAR = dma_chan[i].device;
340}
341
342
343EXPORT_SYMBOL(sa1100_request_dma);
344EXPORT_SYMBOL(sa1100_free_dma);
345EXPORT_SYMBOL(sa1100_start_dma);
346EXPORT_SYMBOL(sa1100_get_dma_pos);
347EXPORT_SYMBOL(sa1100_reset_dma);
348