blob: bcf38fd5106a2324ccd83dace8d9a8e25a46d789 [file] [log] [blame]
Mark Brownc4a54b82013-08-06 01:31:28 +01001/*
2 * helpers.c -- Voltage/Current Regulator framework helper functions.
3 *
4 * Copyright 2007, 2008 Wolfson Microelectronics PLC.
5 * Copyright 2008 SlimLogic Ltd.
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
11 *
12 */
13
14#include <linux/kernel.h>
15#include <linux/err.h>
16#include <linux/delay.h>
17#include <linux/regmap.h>
18#include <linux/regulator/consumer.h>
19#include <linux/regulator/driver.h>
20#include <linux/module.h>
21
22/**
23 * regulator_is_enabled_regmap - standard is_enabled() for regmap users
24 *
25 * @rdev: regulator to operate on
26 *
27 * Regulators that use regmap for their register I/O can set the
28 * enable_reg and enable_mask fields in their descriptor and then use
29 * this as their is_enabled operation, saving some code.
30 */
31int regulator_is_enabled_regmap(struct regulator_dev *rdev)
32{
33 unsigned int val;
34 int ret;
35
36 ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
37 if (ret != 0)
38 return ret;
39
Carlo Caioneca5d1b32014-03-05 22:11:29 +010040 val &= rdev->desc->enable_mask;
41
42 if (rdev->desc->enable_is_inverted) {
43 if (rdev->desc->enable_val)
44 return val != rdev->desc->enable_val;
45 return val == 0;
46 } else {
47 if (rdev->desc->enable_val)
48 return val == rdev->desc->enable_val;
49 return val != 0;
50 }
Mark Brownc4a54b82013-08-06 01:31:28 +010051}
52EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
53
54/**
55 * regulator_enable_regmap - standard enable() for regmap users
56 *
57 * @rdev: regulator to operate on
58 *
59 * Regulators that use regmap for their register I/O can set the
60 * enable_reg and enable_mask fields in their descriptor and then use
61 * this as their enable() operation, saving some code.
62 */
63int regulator_enable_regmap(struct regulator_dev *rdev)
64{
65 unsigned int val;
66
Carlo Caioneca5d1b32014-03-05 22:11:29 +010067 if (rdev->desc->enable_is_inverted) {
68 val = rdev->desc->disable_val;
69 } else {
70 val = rdev->desc->enable_val;
71 if (!val)
72 val = rdev->desc->enable_mask;
73 }
Mark Brownc4a54b82013-08-06 01:31:28 +010074
75 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
76 rdev->desc->enable_mask, val);
77}
78EXPORT_SYMBOL_GPL(regulator_enable_regmap);
79
80/**
81 * regulator_disable_regmap - standard disable() for regmap users
82 *
83 * @rdev: regulator to operate on
84 *
85 * Regulators that use regmap for their register I/O can set the
86 * enable_reg and enable_mask fields in their descriptor and then use
87 * this as their disable() operation, saving some code.
88 */
89int regulator_disable_regmap(struct regulator_dev *rdev)
90{
91 unsigned int val;
92
Carlo Caioneca5d1b32014-03-05 22:11:29 +010093 if (rdev->desc->enable_is_inverted) {
94 val = rdev->desc->enable_val;
95 if (!val)
96 val = rdev->desc->enable_mask;
97 } else {
98 val = rdev->desc->disable_val;
99 }
Mark Brownc4a54b82013-08-06 01:31:28 +0100100
101 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
102 rdev->desc->enable_mask, val);
103}
104EXPORT_SYMBOL_GPL(regulator_disable_regmap);
105
106/**
107 * regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users
108 *
109 * @rdev: regulator to operate on
110 *
111 * Regulators that use regmap for their register I/O can set the
112 * vsel_reg and vsel_mask fields in their descriptor and then use this
113 * as their get_voltage_vsel operation, saving some code.
114 */
115int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev)
116{
117 unsigned int val;
118 int ret;
119
120 ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
121 if (ret != 0)
122 return ret;
123
124 val &= rdev->desc->vsel_mask;
125 val >>= ffs(rdev->desc->vsel_mask) - 1;
126
127 return val;
128}
129EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);
130
131/**
132 * regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users
133 *
134 * @rdev: regulator to operate on
135 * @sel: Selector to set
136 *
137 * Regulators that use regmap for their register I/O can set the
138 * vsel_reg and vsel_mask fields in their descriptor and then use this
139 * as their set_voltage_vsel operation, saving some code.
140 */
141int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
142{
143 int ret;
144
145 sel <<= ffs(rdev->desc->vsel_mask) - 1;
146
147 ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
148 rdev->desc->vsel_mask, sel);
149 if (ret)
150 return ret;
151
152 if (rdev->desc->apply_bit)
153 ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
154 rdev->desc->apply_bit,
155 rdev->desc->apply_bit);
156 return ret;
157}
158EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);
159
160/**
161 * regulator_map_voltage_iterate - map_voltage() based on list_voltage()
162 *
163 * @rdev: Regulator to operate on
164 * @min_uV: Lower bound for voltage
165 * @max_uV: Upper bound for voltage
166 *
167 * Drivers implementing set_voltage_sel() and list_voltage() can use
168 * this as their map_voltage() operation. It will find a suitable
169 * voltage by calling list_voltage() until it gets something in bounds
170 * for the requested voltages.
171 */
172int regulator_map_voltage_iterate(struct regulator_dev *rdev,
173 int min_uV, int max_uV)
174{
175 int best_val = INT_MAX;
176 int selector = 0;
177 int i, ret;
178
179 /* Find the smallest voltage that falls within the specified
180 * range.
181 */
182 for (i = 0; i < rdev->desc->n_voltages; i++) {
183 ret = rdev->desc->ops->list_voltage(rdev, i);
184 if (ret < 0)
185 continue;
186
187 if (ret < best_val && ret >= min_uV && ret <= max_uV) {
188 best_val = ret;
189 selector = i;
190 }
191 }
192
193 if (best_val != INT_MAX)
194 return selector;
195 else
196 return -EINVAL;
197}
198EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate);
199
200/**
201 * regulator_map_voltage_ascend - map_voltage() for ascendant voltage list
202 *
203 * @rdev: Regulator to operate on
204 * @min_uV: Lower bound for voltage
205 * @max_uV: Upper bound for voltage
206 *
207 * Drivers that have ascendant voltage list can use this as their
208 * map_voltage() operation.
209 */
210int regulator_map_voltage_ascend(struct regulator_dev *rdev,
211 int min_uV, int max_uV)
212{
213 int i, ret;
214
215 for (i = 0; i < rdev->desc->n_voltages; i++) {
216 ret = rdev->desc->ops->list_voltage(rdev, i);
217 if (ret < 0)
218 continue;
219
220 if (ret > max_uV)
221 break;
222
223 if (ret >= min_uV && ret <= max_uV)
224 return i;
225 }
226
227 return -EINVAL;
228}
229EXPORT_SYMBOL_GPL(regulator_map_voltage_ascend);
230
231/**
232 * regulator_map_voltage_linear - map_voltage() for simple linear mappings
233 *
234 * @rdev: Regulator to operate on
235 * @min_uV: Lower bound for voltage
236 * @max_uV: Upper bound for voltage
237 *
238 * Drivers providing min_uV and uV_step in their regulator_desc can
239 * use this as their map_voltage() operation.
240 */
241int regulator_map_voltage_linear(struct regulator_dev *rdev,
242 int min_uV, int max_uV)
243{
244 int ret, voltage;
245
246 /* Allow uV_step to be 0 for fixed voltage */
247 if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) {
248 if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV)
249 return 0;
250 else
251 return -EINVAL;
252 }
253
254 if (!rdev->desc->uV_step) {
255 BUG_ON(!rdev->desc->uV_step);
256 return -EINVAL;
257 }
258
259 if (min_uV < rdev->desc->min_uV)
260 min_uV = rdev->desc->min_uV;
261
262 ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
263 if (ret < 0)
264 return ret;
265
266 ret += rdev->desc->linear_min_sel;
267
268 /* Map back into a voltage to verify we're still in bounds */
269 voltage = rdev->desc->ops->list_voltage(rdev, ret);
270 if (voltage < min_uV || voltage > max_uV)
271 return -EINVAL;
272
273 return ret;
274}
275EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);
276
277/**
Krzysztof Kozlowski43343f82015-04-19 15:34:19 +0900278 * regulator_map_voltage_linear_range - map_voltage() for multiple linear ranges
Mark Brownc4a54b82013-08-06 01:31:28 +0100279 *
280 * @rdev: Regulator to operate on
281 * @min_uV: Lower bound for voltage
282 * @max_uV: Upper bound for voltage
283 *
284 * Drivers providing linear_ranges in their descriptor can use this as
285 * their map_voltage() callback.
286 */
287int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
288 int min_uV, int max_uV)
289{
290 const struct regulator_linear_range *range;
291 int ret = -EINVAL;
292 int voltage, i;
293
294 if (!rdev->desc->n_linear_ranges) {
295 BUG_ON(!rdev->desc->n_linear_ranges);
296 return -EINVAL;
297 }
298
299 for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
Axel Line277e652013-10-11 09:30:24 +0800300 int linear_max_uV;
Mark Brownc4a54b82013-08-06 01:31:28 +0100301
Axel Line277e652013-10-11 09:30:24 +0800302 range = &rdev->desc->linear_ranges[i];
303 linear_max_uV = range->min_uV +
304 (range->max_sel - range->min_sel) * range->uV_step;
305
306 if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV))
Mark Brownc4a54b82013-08-06 01:31:28 +0100307 continue;
308
309 if (min_uV <= range->min_uV)
310 min_uV = range->min_uV;
311
312 /* range->uV_step == 0 means fixed voltage range */
313 if (range->uV_step == 0) {
314 ret = 0;
315 } else {
316 ret = DIV_ROUND_UP(min_uV - range->min_uV,
317 range->uV_step);
318 if (ret < 0)
319 return ret;
320 }
321
322 ret += range->min_sel;
323
324 break;
325 }
326
327 if (i == rdev->desc->n_linear_ranges)
328 return -EINVAL;
329
330 /* Map back into a voltage to verify we're still in bounds */
331 voltage = rdev->desc->ops->list_voltage(rdev, ret);
332 if (voltage < min_uV || voltage > max_uV)
333 return -EINVAL;
334
335 return ret;
336}
337EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);
338
339/**
Axel Lind295f762013-08-09 15:29:27 +0800340 * regulator_list_voltage_linear - List voltages with simple calculation
341 *
342 * @rdev: Regulator device
343 * @selector: Selector to convert into a voltage
344 *
345 * Regulators with a simple linear mapping between voltages and
346 * selectors can set min_uV and uV_step in the regulator descriptor
347 * and then use this function as their list_voltage() operation,
348 */
349int regulator_list_voltage_linear(struct regulator_dev *rdev,
350 unsigned int selector)
351{
352 if (selector >= rdev->desc->n_voltages)
353 return -EINVAL;
354 if (selector < rdev->desc->linear_min_sel)
355 return 0;
356
357 selector -= rdev->desc->linear_min_sel;
358
359 return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
360}
361EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
362
363/**
364 * regulator_list_voltage_linear_range - List voltages for linear ranges
365 *
366 * @rdev: Regulator device
367 * @selector: Selector to convert into a voltage
368 *
369 * Regulators with a series of simple linear mappings between voltages
370 * and selectors can set linear_ranges in the regulator descriptor and
371 * then use this function as their list_voltage() operation,
372 */
373int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
374 unsigned int selector)
375{
376 const struct regulator_linear_range *range;
377 int i;
378
379 if (!rdev->desc->n_linear_ranges) {
380 BUG_ON(!rdev->desc->n_linear_ranges);
381 return -EINVAL;
382 }
383
384 for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
385 range = &rdev->desc->linear_ranges[i];
386
387 if (!(selector >= range->min_sel &&
388 selector <= range->max_sel))
389 continue;
390
391 selector -= range->min_sel;
392
393 return range->min_uV + (range->uV_step * selector);
394 }
395
396 return -EINVAL;
397}
398EXPORT_SYMBOL_GPL(regulator_list_voltage_linear_range);
399
400/**
401 * regulator_list_voltage_table - List voltages with table based mapping
402 *
403 * @rdev: Regulator device
404 * @selector: Selector to convert into a voltage
405 *
406 * Regulators with table based mapping between voltages and
407 * selectors can set volt_table in the regulator descriptor
408 * and then use this function as their list_voltage() operation.
409 */
410int regulator_list_voltage_table(struct regulator_dev *rdev,
411 unsigned int selector)
412{
413 if (!rdev->desc->volt_table) {
414 BUG_ON(!rdev->desc->volt_table);
415 return -EINVAL;
416 }
417
418 if (selector >= rdev->desc->n_voltages)
419 return -EINVAL;
420
421 return rdev->desc->volt_table[selector];
422}
423EXPORT_SYMBOL_GPL(regulator_list_voltage_table);
424
425/**
Mark Brownc4a54b82013-08-06 01:31:28 +0100426 * regulator_set_bypass_regmap - Default set_bypass() using regmap
427 *
428 * @rdev: device to operate on.
429 * @enable: state to set.
430 */
431int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
432{
433 unsigned int val;
434
Carlo Caioneca5d1b32014-03-05 22:11:29 +0100435 if (enable) {
436 val = rdev->desc->bypass_val_on;
437 if (!val)
438 val = rdev->desc->bypass_mask;
439 } else {
440 val = rdev->desc->bypass_val_off;
441 }
Mark Brownc4a54b82013-08-06 01:31:28 +0100442
443 return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
444 rdev->desc->bypass_mask, val);
445}
446EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);
447
448/**
449 * regulator_get_bypass_regmap - Default get_bypass() using regmap
450 *
451 * @rdev: device to operate on.
452 * @enable: current state.
453 */
454int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable)
455{
456 unsigned int val;
457 int ret;
458
459 ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val);
460 if (ret != 0)
461 return ret;
462
Jon Hunterdd1a5712016-04-21 17:12:01 +0100463 *enable = (val & rdev->desc->bypass_mask) == rdev->desc->bypass_val_on;
Mark Brownc4a54b82013-08-06 01:31:28 +0100464
465 return 0;
466}
467EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);
Laxman Dewangan354794d2016-03-02 16:24:47 +0530468
469/**
470 * regulator_set_active_discharge_regmap - Default set_active_discharge()
471 * using regmap
472 *
473 * @rdev: device to operate on.
474 * @enable: state to set, 0 to disable and 1 to enable.
475 */
476int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
477 bool enable)
478{
479 unsigned int val;
480
481 if (enable)
482 val = rdev->desc->active_discharge_on;
483 else
484 val = rdev->desc->active_discharge_off;
485
486 return regmap_update_bits(rdev->regmap,
487 rdev->desc->active_discharge_reg,
488 rdev->desc->active_discharge_mask, val);
489}
490EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap);