Eric Anholt | 548c3a3 | 2015-12-16 13:24:40 -0800 | [diff] [blame] | 1 | #include <dt-bindings/pinctrl/bcm2835.h> |
| 2 | #include <dt-bindings/clock/bcm2835.h> |
Martin Sperl | f974d68 | 2015-09-11 11:22:05 +0000 | [diff] [blame] | 3 | #include <dt-bindings/clock/bcm2835-aux.h> |
Eric Anholt | 548c3a3 | 2015-12-16 13:24:40 -0800 | [diff] [blame] | 4 | #include "skeleton.dtsi" |
| 5 | |
| 6 | /* This include file covers the common peripherals and configuration between |
| 7 | * bcm2835 and bcm2836 implementations, leaving the CPU configuration to |
| 8 | * bcm2835.dtsi and bcm2836.dtsi. |
| 9 | */ |
| 10 | |
| 11 | / { |
| 12 | compatible = "brcm,bcm2835"; |
| 13 | model = "BCM2835"; |
| 14 | interrupt-parent = <&intc>; |
| 15 | |
| 16 | chosen { |
| 17 | bootargs = "earlyprintk console=ttyAMA0"; |
| 18 | }; |
| 19 | |
| 20 | soc { |
| 21 | compatible = "simple-bus"; |
| 22 | #address-cells = <1>; |
| 23 | #size-cells = <1>; |
| 24 | |
| 25 | timer@7e003000 { |
| 26 | compatible = "brcm,bcm2835-system-timer"; |
| 27 | reg = <0x7e003000 0x1000>; |
| 28 | interrupts = <1 0>, <1 1>, <1 2>, <1 3>; |
| 29 | /* This could be a reference to BCM2835_CLOCK_TIMER, |
| 30 | * but we don't have the driver using the common clock |
| 31 | * support yet. |
| 32 | */ |
| 33 | clock-frequency = <1000000>; |
| 34 | }; |
| 35 | |
| 36 | dma: dma@7e007000 { |
| 37 | compatible = "brcm,bcm2835-dma"; |
| 38 | reg = <0x7e007000 0xf00>; |
| 39 | interrupts = <1 16>, |
| 40 | <1 17>, |
| 41 | <1 18>, |
| 42 | <1 19>, |
| 43 | <1 20>, |
| 44 | <1 21>, |
| 45 | <1 22>, |
| 46 | <1 23>, |
| 47 | <1 24>, |
| 48 | <1 25>, |
| 49 | <1 26>, |
| 50 | <1 27>, |
| 51 | <1 28>; |
| 52 | |
| 53 | #dma-cells = <1>; |
| 54 | brcm,dma-channel-mask = <0x7f35>; |
| 55 | }; |
| 56 | |
| 57 | intc: interrupt-controller@7e00b200 { |
| 58 | compatible = "brcm,bcm2835-armctrl-ic"; |
| 59 | reg = <0x7e00b200 0x200>; |
| 60 | interrupt-controller; |
| 61 | #interrupt-cells = <2>; |
| 62 | }; |
| 63 | |
| 64 | watchdog@7e100000 { |
| 65 | compatible = "brcm,bcm2835-pm-wdt"; |
| 66 | reg = <0x7e100000 0x28>; |
| 67 | }; |
| 68 | |
| 69 | clocks: cprman@7e101000 { |
| 70 | compatible = "brcm,bcm2835-cprman"; |
| 71 | #clock-cells = <1>; |
| 72 | reg = <0x7e101000 0x2000>; |
| 73 | |
| 74 | /* CPRMAN derives everything from the platform's |
| 75 | * oscillator. |
| 76 | */ |
| 77 | clocks = <&clk_osc>; |
| 78 | }; |
| 79 | |
| 80 | rng@7e104000 { |
| 81 | compatible = "brcm,bcm2835-rng"; |
| 82 | reg = <0x7e104000 0x10>; |
| 83 | }; |
| 84 | |
| 85 | mailbox: mailbox@7e00b800 { |
| 86 | compatible = "brcm,bcm2835-mbox"; |
| 87 | reg = <0x7e00b880 0x40>; |
| 88 | interrupts = <0 1>; |
| 89 | #mbox-cells = <0>; |
| 90 | }; |
| 91 | |
| 92 | gpio: gpio@7e200000 { |
| 93 | compatible = "brcm,bcm2835-gpio"; |
| 94 | reg = <0x7e200000 0xb4>; |
| 95 | /* |
| 96 | * The GPIO IP block is designed for 3 banks of GPIOs. |
| 97 | * Each bank has a GPIO interrupt for itself. |
| 98 | * There is an overall "any bank" interrupt. |
| 99 | * In order, these are GIC interrupts 17, 18, 19, 20. |
| 100 | * Since the BCM2835 only has 2 banks, the 2nd bank |
| 101 | * interrupt output appears to be mirrored onto the |
| 102 | * 3rd bank's interrupt signal. |
| 103 | * So, a bank0 interrupt shows up on 17, 20, and |
| 104 | * a bank1 interrupt shows up on 18, 19, 20! |
| 105 | */ |
| 106 | interrupts = <2 17>, <2 18>, <2 19>, <2 20>; |
| 107 | |
| 108 | gpio-controller; |
| 109 | #gpio-cells = <2>; |
| 110 | |
| 111 | interrupt-controller; |
| 112 | #interrupt-cells = <2>; |
| 113 | }; |
| 114 | |
| 115 | uart0: uart@7e201000 { |
| 116 | compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; |
| 117 | reg = <0x7e201000 0x1000>; |
| 118 | interrupts = <2 25>; |
| 119 | clocks = <&clocks BCM2835_CLOCK_UART>, |
| 120 | <&clocks BCM2835_CLOCK_VPU>; |
| 121 | clock-names = "uartclk", "apb_pclk"; |
| 122 | arm,primecell-periphid = <0x00241011>; |
| 123 | }; |
| 124 | |
| 125 | i2s: i2s@7e203000 { |
| 126 | compatible = "brcm,bcm2835-i2s"; |
| 127 | reg = <0x7e203000 0x20>, |
| 128 | <0x7e101098 0x02>; |
| 129 | |
| 130 | dmas = <&dma 2>, |
| 131 | <&dma 3>; |
| 132 | dma-names = "tx", "rx"; |
| 133 | status = "disabled"; |
| 134 | }; |
| 135 | |
| 136 | spi: spi@7e204000 { |
| 137 | compatible = "brcm,bcm2835-spi"; |
| 138 | reg = <0x7e204000 0x1000>; |
| 139 | interrupts = <2 22>; |
| 140 | clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 141 | #address-cells = <1>; |
| 142 | #size-cells = <0>; |
| 143 | status = "disabled"; |
| 144 | }; |
| 145 | |
| 146 | i2c0: i2c@7e205000 { |
| 147 | compatible = "brcm,bcm2835-i2c"; |
| 148 | reg = <0x7e205000 0x1000>; |
| 149 | interrupts = <2 21>; |
| 150 | clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 151 | #address-cells = <1>; |
| 152 | #size-cells = <0>; |
| 153 | status = "disabled"; |
| 154 | }; |
| 155 | |
Eric Anholt | ddc5c39 | 2015-12-15 15:35:59 -0800 | [diff] [blame] | 156 | aux: aux@0x7e215000 { |
| 157 | compatible = "brcm,bcm2835-aux"; |
| 158 | #clock-cells = <1>; |
| 159 | reg = <0x7e215000 0x8>; |
| 160 | clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 161 | }; |
| 162 | |
Martin Sperl | f974d68 | 2015-09-11 11:22:05 +0000 | [diff] [blame] | 163 | spi1: spi@7e215080 { |
| 164 | compatible = "brcm,bcm2835-aux-spi"; |
| 165 | reg = <0x7e215080 0x40>; |
| 166 | interrupts = <1 29>; |
| 167 | clocks = <&aux BCM2835_AUX_CLOCK_SPI1>; |
| 168 | #address-cells = <1>; |
| 169 | #size-cells = <0>; |
| 170 | status = "disabled"; |
| 171 | }; |
| 172 | |
| 173 | spi2: spi@7e2150c0 { |
| 174 | compatible = "brcm,bcm2835-aux-spi"; |
| 175 | reg = <0x7e2150c0 0x40>; |
| 176 | interrupts = <1 29>; |
| 177 | clocks = <&aux BCM2835_AUX_CLOCK_SPI2>; |
| 178 | #address-cells = <1>; |
| 179 | #size-cells = <0>; |
| 180 | status = "disabled"; |
| 181 | }; |
| 182 | |
Remi Pommarel | 40ad449 | 2015-12-21 21:12:59 +0100 | [diff] [blame^] | 183 | pwm: pwm@7e20c000 { |
| 184 | compatible = "brcm,bcm2835-pwm"; |
| 185 | reg = <0x7e20c000 0x28>; |
| 186 | clocks = <&clocks BCM2835_CLOCK_PWM>; |
| 187 | assigned-clocks = <&clocks BCM2835_CLOCK_PWM>; |
| 188 | assigned-clock-rates = <10000000>; |
| 189 | #pwm-cells = <2>; |
| 190 | status = "disabled"; |
| 191 | }; |
| 192 | |
Eric Anholt | 548c3a3 | 2015-12-16 13:24:40 -0800 | [diff] [blame] | 193 | sdhci: sdhci@7e300000 { |
| 194 | compatible = "brcm,bcm2835-sdhci"; |
| 195 | reg = <0x7e300000 0x100>; |
| 196 | interrupts = <2 30>; |
| 197 | clocks = <&clocks BCM2835_CLOCK_EMMC>; |
| 198 | status = "disabled"; |
| 199 | }; |
| 200 | |
| 201 | i2c1: i2c@7e804000 { |
| 202 | compatible = "brcm,bcm2835-i2c"; |
| 203 | reg = <0x7e804000 0x1000>; |
| 204 | interrupts = <2 21>; |
| 205 | clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 206 | #address-cells = <1>; |
| 207 | #size-cells = <0>; |
| 208 | status = "disabled"; |
| 209 | }; |
| 210 | |
| 211 | i2c2: i2c@7e805000 { |
| 212 | compatible = "brcm,bcm2835-i2c"; |
| 213 | reg = <0x7e805000 0x1000>; |
| 214 | interrupts = <2 21>; |
| 215 | clocks = <&clocks BCM2835_CLOCK_VPU>; |
| 216 | #address-cells = <1>; |
| 217 | #size-cells = <0>; |
| 218 | status = "disabled"; |
| 219 | }; |
| 220 | |
| 221 | usb@7e980000 { |
| 222 | compatible = "brcm,bcm2835-usb"; |
| 223 | reg = <0x7e980000 0x10000>; |
| 224 | interrupts = <1 9>; |
| 225 | }; |
| 226 | }; |
| 227 | |
| 228 | clocks { |
| 229 | compatible = "simple-bus"; |
| 230 | #address-cells = <1>; |
| 231 | #size-cells = <0>; |
| 232 | |
| 233 | /* The oscillator is the root of the clock tree. */ |
| 234 | clk_osc: clock@3 { |
| 235 | compatible = "fixed-clock"; |
| 236 | reg = <3>; |
| 237 | #clock-cells = <0>; |
| 238 | clock-output-names = "osc"; |
| 239 | clock-frequency = <19200000>; |
| 240 | }; |
| 241 | |
| 242 | }; |
| 243 | }; |