blob: 6bdfd47d679d9425d777ac68cc7b6b22d13e46f0 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001
2#
3# Network device configuration
4#
5
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07006menuconfig NETDEVICES
Paolo 'Blaisorblade' Giarrussoce2d2ae2006-01-18 17:42:59 -08007 default y if UML
Jan Engelhardte0009822007-07-21 19:11:35 -07008 depends on NET
Linus Torvalds1da177e2005-04-16 15:20:36 -07009 bool "Network device support"
10 ---help---
11 You can say N here if you don't intend to connect your Linux box to
12 any other computer at all.
13
14 You'll have to say Y if your computer contains a network card that
15 you want to use under Linux. If you are going to run SLIP or PPP over
16 telephone line or null modem cable you need say Y here. Connecting
17 two machines with parallel ports using PLIP needs this, as well as
18 AX.25/KISS for sending Internet traffic over amateur radio links.
19
20 See also "The Linux Network Administrator's Guide" by Olaf Kirch and
21 Terry Dawson. Available at <http://www.tldp.org/guides.html>.
22
23 If unsure, say Y.
24
Randy Dunlap1618cb02006-09-25 23:11:21 -070025# All the following symbols are dependent on NETDEVICES - do not repeat
26# that for each of the symbols.
27if NETDEVICES
Randy Dunlapcbcd2a42005-07-27 13:04:35 -070028
Jamal Hadi Salim253af422006-01-08 22:34:25 -080029config IFB
30 tristate "Intermediate Functional Block support"
31 depends on NET_CLS_ACT
32 ---help---
Matt LaPlante3cb2fcc2006-11-30 05:22:59 +010033 This is an intermediate driver that allows sharing of
Jamal Hadi Salim253af422006-01-08 22:34:25 -080034 resources.
35 To compile this driver as a module, choose M here: the module
36 will be called ifb. If you want to use more than one ifb
37 device at a time, you need to compile this driver as a module.
38 Instead of 'ifb', the devices will then be called 'ifb0',
39 'ifb1' etc.
40 Look at the iproute2 documentation directory for usage etc
41
Linus Torvalds1da177e2005-04-16 15:20:36 -070042config DUMMY
43 tristate "Dummy net driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070044 ---help---
45 This is essentially a bit-bucket device (i.e. traffic you send to
46 this device is consigned into oblivion) with a configurable IP
47 address. It is most commonly used in order to make your currently
48 inactive SLIP address seem like a real address for local programs.
49 If you use SLIP or PPP, you might want to say Y here. Since this
50 thing often comes in handy, the default is Y. It won't enlarge your
51 kernel either. What a deal. Read about it in the Network
52 Administrator's Guide, available from
53 <http://www.tldp.org/docs.html#guide>.
54
55 To compile this driver as a module, choose M here: the module
56 will be called dummy. If you want to use more than one dummy
57 device at a time, you need to compile this driver as a module.
58 Instead of 'dummy', the devices will then be called 'dummy0',
59 'dummy1' etc.
60
61config BONDING
62 tristate "Bonding driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070063 depends on INET
Brian Haley305d5522008-11-04 17:51:14 -080064 depends on IPV6 || IPV6=n
Linus Torvalds1da177e2005-04-16 15:20:36 -070065 ---help---
66 Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
67 Channels together. This is called 'Etherchannel' by Cisco,
68 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
69
70 The driver supports multiple bonding modes to allow for both high
Jon Mason47c51432006-02-12 11:53:04 -060071 performance and high availability operation.
Linus Torvalds1da177e2005-04-16 15:20:36 -070072
73 Refer to <file:Documentation/networking/bonding.txt> for more
74 information.
75
76 To compile this driver as a module, choose M here: the module
77 will be called bonding.
78
Patrick McHardyb863ceb2007-07-14 18:55:06 -070079config MACVLAN
80 tristate "MAC-VLAN support (EXPERIMENTAL)"
81 depends on EXPERIMENTAL
82 ---help---
83 This allows one to create virtual interfaces that map packets to
84 or from specific MAC addresses to a particular interface.
85
Patrick McHardy3dbf8d52008-02-26 17:52:05 -080086 Macvlan devices can be added using the "ip" command from the
87 iproute2 package starting with the iproute2-2.6.23 release:
88
89 "ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
90
Patrick McHardyb863ceb2007-07-14 18:55:06 -070091 To compile this driver as a module, choose M here: the module
92 will be called macvlan.
93
Linus Torvalds1da177e2005-04-16 15:20:36 -070094config EQUALIZER
95 tristate "EQL (serial line load balancing) support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070096 ---help---
97 If you have two serial connections to some other computer (this
98 usually requires two modems and two telephone lines) and you use
99 SLIP (the protocol for sending Internet traffic over telephone
100 lines) or PPP (a better SLIP) on them, you can make them behave like
101 one double speed connection using this driver. Naturally, this has
102 to be supported at the other end as well, either with a similar EQL
103 Linux driver or with a Livingston Portmaster 2e.
104
105 Say Y if you want this and read
106 <file:Documentation/networking/eql.txt>. You may also want to read
107 section 6.2 of the NET-3-HOWTO, available from
108 <http://www.tldp.org/docs.html#howto>.
109
110 To compile this driver as a module, choose M here: the module
111 will be called eql. If unsure, say N.
112
113config TUN
114 tristate "Universal TUN/TAP device driver support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700115 select CRC32
116 ---help---
117 TUN/TAP provides packet reception and transmission for user space
118 programs. It can be viewed as a simple Point-to-Point or Ethernet
119 device, which instead of receiving packets from a physical media,
120 receives them from user space program and instead of sending packets
121 via physical media writes them to the user space program.
122
123 When a program opens /dev/net/tun, driver creates and registers
124 corresponding net device tunX or tapX. After a program closed above
125 devices, driver will automatically delete tunXX or tapXX device and
126 all routes corresponding to it.
127
128 Please read <file:Documentation/networking/tuntap.txt> for more
129 information.
130
131 To compile this driver as a module, choose M here: the module
132 will be called tun.
133
134 If you don't know what to use this for, you don't need it.
135
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700136config VETH
Rusty Russell6a9a0252007-11-06 20:35:55 -0800137 tristate "Virtual ethernet pair device"
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700138 ---help---
Rusty Russell6a9a0252007-11-06 20:35:55 -0800139 This device is a local ethernet tunnel. Devices are created in pairs.
140 When one end receives the packet it appears on its pair and vice
141 versa.
Pavel Emelyanove314dbd2007-09-25 16:14:46 -0700142
Linus Torvalds1da177e2005-04-16 15:20:36 -0700143config NET_SB1000
144 tristate "General Instruments Surfboard 1000"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -0700145 depends on PNP
Linus Torvalds1da177e2005-04-16 15:20:36 -0700146 ---help---
147 This is a driver for the General Instrument (also known as
148 NextLevel) SURFboard 1000 internal
149 cable modem. This is an ISA card which is used by a number of cable
150 TV companies to provide cable modem access. It's a one-way
151 downstream-only cable modem, meaning that your upstream net link is
152 provided by your regular phone modem.
153
154 At present this driver only compiles as a module, so say M here if
155 you have this card. The module will be called sb1000. Then read
156 <file:Documentation/networking/README.sb1000> for information on how
157 to use this module, as it needs special ppp scripts for establishing
158 a connection. Further documentation and the necessary scripts can be
159 found at:
160
161 <http://www.jacksonville.net/~fventuri/>
162 <http://home.adelphia.net/~siglercm/sb1000.html>
163 <http://linuxpower.cx/~cable/>
164
165 If you don't have this card, of course say N.
166
Adrian Bunkf65fd8f2006-01-05 22:45:41 -0800167source "drivers/net/arcnet/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700168
Andy Fleming00db8182005-07-30 19:31:23 -0400169source "drivers/net/phy/Kconfig"
170
Linus Torvalds1da177e2005-04-16 15:20:36 -0700171#
172# Ethernet
173#
174
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700175menuconfig NET_ETHERNET
Linus Torvalds1da177e2005-04-16 15:20:36 -0700176 bool "Ethernet (10 or 100Mbit)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700177 depends on !UML
Linus Torvalds1da177e2005-04-16 15:20:36 -0700178 ---help---
179 Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
180 type of Local Area Network (LAN) in universities and companies.
181
182 Common varieties of Ethernet are: 10BASE-2 or Thinnet (10 Mbps over
183 coaxial cable, linking computers in a chain), 10BASE-T or twisted
184 pair (10 Mbps over twisted pair cable, linking computers to central
185 hubs), 10BASE-F (10 Mbps over optical fiber links, using hubs),
186 100BASE-TX (100 Mbps over two twisted pair cables, using hubs),
187 100BASE-T4 (100 Mbps over 4 standard voice-grade twisted pair
188 cables, using hubs), 100BASE-FX (100 Mbps over optical fiber links)
189 [the 100BASE varieties are also known as Fast Ethernet], and Gigabit
190 Ethernet (1 Gbps over optical fiber or short copper links).
191
192 If your Linux machine will be connected to an Ethernet and you have
193 an Ethernet network interface card (NIC) installed in your computer,
194 say Y here and read the Ethernet-HOWTO, available from
195 <http://www.tldp.org/docs.html#howto>. You will then also have
196 to say Y to the driver for your particular NIC.
197
198 Note that the answer to this question won't directly affect the
199 kernel: saying N will just cause the configurator to skip all
200 the questions about Ethernet network cards. If unsure, say N.
201
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700202if NET_ETHERNET
203
Linus Torvalds1da177e2005-04-16 15:20:36 -0700204config MII
205 tristate "Generic Media Independent Interface device support"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700206 help
207 Most ethernet controllers have MII transceiver either as an external
208 or internal device. It is safe to say Y or M here even if your
209 ethernet card lack MII.
210
Haavard Skinnemoen89e57852006-11-09 14:51:17 +0100211config MACB
212 tristate "Atmel MACB support"
sedji gaouaou61352662008-07-10 10:15:35 +0100213 depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9
frederic RODO6c36a702007-07-12 19:07:24 +0200214 select PHYLIB
Haavard Skinnemoen89e57852006-11-09 14:51:17 +0100215 help
216 The Atmel MACB ethernet interface is found on many AT32 and AT91
217 parts. Say Y to include support for the MACB chip.
218
219 To compile this driver as a module, choose M here: the module
220 will be called macb.
221
Linus Torvalds1da177e2005-04-16 15:20:36 -0700222source "drivers/net/arm/Kconfig"
223
Ben Dooks825a2ff2007-07-03 16:53:09 +0100224config AX88796
225 tristate "ASIX AX88796 NE2000 clone support"
Magnus Damm86879912007-11-08 16:31:05 +0900226 depends on ARM || MIPS || SUPERH
Ben Dooks825a2ff2007-07-03 16:53:09 +0100227 select CRC32
228 select MII
229 help
230 AX88796 driver, using platform bus to provide
231 chip detection and resources
232
Magnus Damm89e536a2007-09-28 22:42:16 -0700233config AX88796_93CX6
234 bool "ASIX AX88796 external 93CX6 eeprom support"
235 depends on AX88796
236 select EEPROM_93CX6
237 help
238 Select this if your platform comes with an external 93CX6 eeprom.
239
Linus Torvalds1da177e2005-04-16 15:20:36 -0700240config MACE
241 tristate "MACE (Power Mac ethernet) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700242 depends on PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700243 select CRC32
244 help
245 Power Macintoshes and clones with Ethernet built-in on the
246 motherboard will usually use a MACE (Medium Access Control for
247 Ethernet) interface. Say Y to include support for the MACE chip.
248
249 To compile this driver as a module, choose M here: the module
250 will be called mace.
251
252config MACE_AAUI_PORT
253 bool "Use AAUI port instead of TP by default"
254 depends on MACE
255 help
256 Some Apple machines (notably the Apple Network Server) which use the
257 MACE ethernet chip have an Apple AUI port (small 15-pin connector),
258 instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
259 Y here if you have such a machine. If unsure, say N.
260 The driver will default to AAUI on ANS anyway, and if you use it as
261 a module, you can provide the port_aaui=0|1 to force the driver.
262
263config BMAC
264 tristate "BMAC (G3 ethernet) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700265 depends on PPC_PMAC && PPC32
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266 select CRC32
267 help
268 Say Y for support of BMAC Ethernet interfaces. These are used on G3
269 computers.
270
271 To compile this driver as a module, choose M here: the module
272 will be called bmac.
273
Linus Torvalds1da177e2005-04-16 15:20:36 -0700274config ARIADNE
275 tristate "Ariadne support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700276 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700277 help
278 If you have a Village Tronic Ariadne Ethernet adapter, say Y.
279 Otherwise, say N.
280
281 To compile this driver as a module, choose M here: the module
282 will be called ariadne.
283
284config A2065
285 tristate "A2065 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700286 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287 select CRC32
288 help
289 If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
290 say N.
291
292 To compile this driver as a module, choose M here: the module
293 will be called a2065.
294
295config HYDRA
296 tristate "Hydra support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700297 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700298 select CRC32
299 help
300 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
301
302 To compile this driver as a module, choose M here: the module
303 will be called hydra.
304
305config ZORRO8390
306 tristate "Zorro NS8390-based Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700307 depends on ZORRO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700308 select CRC32
309 help
310 This driver is for Zorro Ethernet cards using an NS8390-compatible
311 chipset, like the Village Tronic Ariadne II and the Individual
312 Computers X-Surf Ethernet cards. If you have such a card, say Y.
313 Otherwise, say N.
314
315 To compile this driver as a module, choose M here: the module
316 will be called zorro8390.
317
318config APNE
319 tristate "PCMCIA NE2000 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700320 depends on AMIGA_PCMCIA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700321 select CRC32
322 help
323 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
324 say N.
325
326 To compile this driver as a module, choose M here: the module
327 will be called apne.
328
Linus Torvalds1da177e2005-04-16 15:20:36 -0700329config MAC8390
330 bool "Macintosh NS 8390 based ethernet cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700331 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700332 select CRC32
333 help
334 If you want to include a driver to support Nubus or LC-PDS
335 Ethernet cards using an NS8390 chipset or its equivalent, say Y
336 and read the Ethernet-HOWTO, available from
337 <http://www.tldp.org/docs.html#howto>.
338
339config MAC89x0
340 tristate "Macintosh CS89x0 based ethernet cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700341 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700342 ---help---
343 Support for CS89x0 chipset based Ethernet cards. If you have a
344 Nubus or LC-PDS network (Ethernet) card of this type, say Y and
345 read the Ethernet-HOWTO, available from
346 <http://www.tldp.org/docs.html#howto>.
347
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800348 To compile this driver as a module, choose M here. This module will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700349 be called mac89x0.
350
351config MACSONIC
352 tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700353 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700354 ---help---
355 Support for NatSemi SONIC based Ethernet devices. This includes
356 the onboard Ethernet in many Quadras as well as some LC-PDS,
357 a few Nubus and all known Comm Slot Ethernet cards. If you have
358 one of these say Y and read the Ethernet-HOWTO, available from
359 <http://www.tldp.org/docs.html#howto>.
360
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800361 To compile this driver as a module, choose M here. This module will
Linus Torvalds1da177e2005-04-16 15:20:36 -0700362 be called macsonic.
363
364config MACMACE
Finn Thain8b6aaab2007-05-01 22:33:01 +0200365 bool "Macintosh (AV) onboard MACE ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700366 depends on MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700367 select CRC32
368 help
369 Support for the onboard AMD 79C940 MACE Ethernet controller used in
370 the 660AV and 840AV Macintosh. If you have one of these Macintoshes
371 say Y and read the Ethernet-HOWTO, available from
372 <http://www.tldp.org/docs.html#howto>.
373
374config MVME147_NET
375 tristate "MVME147 (Lance) Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700376 depends on MVME147
Linus Torvalds1da177e2005-04-16 15:20:36 -0700377 select CRC32
378 help
379 Support for the on-board Ethernet interface on the Motorola MVME147
380 single-board computer. Say Y here to include the
381 driver for this chip in your kernel.
382 To compile this driver as a module, choose M here.
383
384config MVME16x_NET
385 tristate "MVME16x Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700386 depends on MVME16x
Linus Torvalds1da177e2005-04-16 15:20:36 -0700387 help
388 This is the driver for the Ethernet interface on the Motorola
389 MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
390 driver for this chip in your kernel.
391 To compile this driver as a module, choose M here.
392
393config BVME6000_NET
394 tristate "BVME6000 Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700395 depends on BVME6000
Linus Torvalds1da177e2005-04-16 15:20:36 -0700396 help
397 This is the driver for the Ethernet interface on BVME4000 and
398 BVME6000 VME boards. Say Y here to include the driver for this chip
399 in your kernel.
400 To compile this driver as a module, choose M here.
401
402config ATARILANCE
403 tristate "Atari Lance support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700404 depends on ATARI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405 help
406 Say Y to include support for several Atari Ethernet adapters based
407 on the AMD Lance chipset: RieblCard (with or without battery), or
408 PAMCard VME (also the version by Rhotron, with different addresses).
409
Linus Torvalds1da177e2005-04-16 15:20:36 -0700410config SUN3LANCE
411 tristate "Sun3/Sun3x on-board LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700412 depends on SUN3 || SUN3X
Linus Torvalds1da177e2005-04-16 15:20:36 -0700413 help
414 Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
415 featured an AMD Lance 10Mbit Ethernet controller on board; say Y
416 here to compile in the Linux driver for this and enable Ethernet.
417 General Linux information on the Sun 3 and 3x series (now
418 discontinued) is at
419 <http://www.angelfire.com/ca2/tech68k/sun3.html>.
420
421 If you're not building a kernel for a Sun 3, say N.
422
423config SUN3_82586
Al Viro9a482202005-08-25 06:24:56 +0100424 bool "Sun3 on-board Intel 82586 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700425 depends on SUN3
Linus Torvalds1da177e2005-04-16 15:20:36 -0700426 help
427 This driver enables support for the on-board Intel 82586 based
428 Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
429 that this driver does not support 82586-based adapters on additional
430 VME boards.
431
432config HPLANCE
433 bool "HP on-board LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700434 depends on DIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700435 select CRC32
436 help
437 If you want to use the builtin "LANCE" Ethernet controller on an
438 HP300 machine, say Y here.
439
440config LASI_82596
441 tristate "Lasi ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700442 depends on GSC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700443 help
Matthew Wilcox6de187e2006-11-18 10:05:16 -0700444 Say Y here to support the builtin Intel 82596 ethernet controller
445 found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700446
Thomas Bogendoerferf2ec8032007-06-28 00:49:06 +0200447config SNI_82596
448 tristate "SNI RM ethernet"
449 depends on NET_ETHERNET && SNI_RM
450 help
451 Say Y here to support the on-board Intel 82596 ethernet controller
452 built into SNI RM machines.
453
Florian Fainellief112912008-03-19 17:14:51 +0100454config KORINA
455 tristate "Korina (IDT RC32434) Ethernet support"
Ralf Baechlef57b2062008-04-28 12:48:40 +0100456 depends on NET_ETHERNET && MIKROTIK_RB532
Florian Fainellief112912008-03-19 17:14:51 +0100457 help
458 If you have a Mikrotik RouterBoard 500 or IDT RC32434
459 based system say Y. Otherwise say N.
460
Linus Torvalds1da177e2005-04-16 15:20:36 -0700461config MIPS_JAZZ_SONIC
462 tristate "MIPS JAZZ onboard SONIC Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700463 depends on MACH_JAZZ
Linus Torvalds1da177e2005-04-16 15:20:36 -0700464 help
465 This is the driver for the onboard card of MIPS Magnum 4000,
466 Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
467
Chris Zankel74f2a5f02008-05-05 23:36:35 -0700468config XTENSA_XT2000_SONIC
469 tristate "Xtensa XT2000 onboard SONIC Ethernet support"
470 depends on XTENSA_PLATFORM_XT2000
471 help
472 This is the driver for the onboard card of the Xtensa XT2000 board.
473
Linus Torvalds1da177e2005-04-16 15:20:36 -0700474config MIPS_AU1X00_ENET
475 bool "MIPS AU1000 Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700476 depends on SOC_AU1X00
Herbert Valerio Riedel0638dec2006-06-01 09:41:04 +0200477 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -0700478 select CRC32
479 help
480 If you have an Alchemy Semi AU1X00 based system
481 say Y. Otherwise, say N.
482
Linus Torvalds1da177e2005-04-16 15:20:36 -0700483config SGI_IOC3_ETH
484 bool "SGI IOC3 Ethernet"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700485 depends on PCI && SGI_IP27
Linus Torvalds1da177e2005-04-16 15:20:36 -0700486 select CRC32
487 select MII
488 help
489 If you have a network (Ethernet) card of this type, say Y and read
490 the Ethernet-HOWTO, available from
491 <http://www.tldp.org/docs.html#howto>.
492
Ralf Baechledcbf8472005-10-10 14:51:27 +0100493config MIPS_SIM_NET
Ralf Baechle1e2b9802007-03-18 23:21:22 +0000494 tristate "MIPS simulator Network device"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700495 depends on MIPS_SIM
Ralf Baechledcbf8472005-10-10 14:51:27 +0100496 help
497 The MIPSNET device is a simple Ethernet network device which is
498 emulated by the MIPS Simulator.
499 If you are not using a MIPSsim or are unsure, say N.
500
Linus Torvalds1da177e2005-04-16 15:20:36 -0700501config SGI_O2MACE_ETH
502 tristate "SGI O2 MACE Fast Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700503 depends on SGI_IP32=y
Linus Torvalds1da177e2005-04-16 15:20:36 -0700504
505config STNIC
506 tristate "National DP83902AV support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700507 depends on SUPERH
Linus Torvalds1da177e2005-04-16 15:20:36 -0700508 select CRC32
509 help
510 Support for cards based on the National Semiconductor DP83902AV
511 ST-NIC Serial Network Interface Controller for Twisted Pair. This
512 is a 10Mbit/sec Ethernet controller. Product overview and specs at
513 <http://www.national.com/pf/DP/DP83902A.html>.
514
515 If unsure, say N.
516
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700517config SH_ETH
518 tristate "Renesas SuperH Ethernet support"
519 depends on SUPERH && \
Yoshinori Sato71557a32008-08-06 19:49:00 -0400520 (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \
521 CPU_SUBTYPE_SH7619)
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700522 select CRC32
523 select MII
524 select MDIO_BITBANG
525 select PHYLIB
526 help
527 Renesas SuperH Ethernet device driver.
Yoshinori Sato71557a32008-08-06 19:49:00 -0400528 This driver support SH7710, SH7712, SH7763 and SH7619.
Nobuhiro Iwamatsu86a74ff2008-06-09 16:33:56 -0700529
Linus Torvalds1da177e2005-04-16 15:20:36 -0700530config SUNLANCE
531 tristate "Sun LANCE support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700532 depends on SBUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700533 select CRC32
534 help
535 This driver supports the "le" interface present on all 32-bit Sparc
536 systems, on some older Ultra systems and as an Sbus option. These
537 cards are based on the AMD Lance chipset, which is better known
538 via the NE2100 cards.
539
540 To compile this driver as a module, choose M here: the module
541 will be called sunlance.
542
543config HAPPYMEAL
544 tristate "Sun Happy Meal 10/100baseT support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700545 depends on SBUS || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700546 select CRC32
547 help
548 This driver supports the "hme" interface present on most Ultra
549 systems and as an option on older Sbus systems. This driver supports
550 both PCI and Sbus devices. This driver also supports the "qfe" quad
551 100baseT device available in both PCI and Sbus configurations.
552
553 To compile this driver as a module, choose M here: the module
554 will be called sunhme.
555
556config SUNBMAC
557 tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700558 depends on SBUS && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700559 select CRC32
560 help
561 This driver supports the "be" interface available as an Sbus option.
562 This is Sun's older 100baseT Ethernet device.
563
564 To compile this driver as a module, choose M here: the module
565 will be called sunbmac.
566
567config SUNQE
568 tristate "Sun QuadEthernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700569 depends on SBUS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700570 select CRC32
571 help
572 This driver supports the "qe" 10baseT Ethernet device, available as
573 an Sbus option. Note that this is not the same as Quad FastEthernet
574 "qfe" which is supported by the Happy Meal driver instead.
575
576 To compile this driver as a module, choose M here: the module
577 will be called sunqe.
578
579config SUNGEM
580 tristate "Sun GEM support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700581 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700582 select CRC32
583 help
584 Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
585 <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
586
David S. Miller1f26dac2005-09-27 15:24:13 -0700587config CASSINI
588 tristate "Sun Cassini support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700589 depends on PCI
David S. Miller1f26dac2005-09-27 15:24:13 -0700590 select CRC32
591 help
592 Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
593 <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
594
David S. Miller4c521e42007-07-09 22:23:51 -0700595config SUNVNET
596 tristate "Sun Virtual Network support"
597 depends on SUN_LDOMS
598 help
599 Support for virtual network devices under Sun Logical Domains.
600
Linus Torvalds1da177e2005-04-16 15:20:36 -0700601config NET_VENDOR_3COM
602 bool "3COM cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700603 depends on ISA || EISA || MCA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700604 help
605 If you have a network (Ethernet) card belonging to this class, say Y
606 and read the Ethernet-HOWTO, available from
607 <http://www.tldp.org/docs.html#howto>.
608
609 Note that the answer to this question doesn't directly affect the
610 kernel: saying N will just cause the configurator to skip all
611 the questions about 3COM cards. If you say Y, you will be asked for
612 your specific card in the following questions.
613
614config EL1
615 tristate "3c501 \"EtherLink\" support"
616 depends on NET_VENDOR_3COM && ISA
617 ---help---
618 If you have a network (Ethernet) card of this type, say Y and read
619 the Ethernet-HOWTO, available from
620 <http://www.tldp.org/docs.html#howto>. Also, consider buying a
621 new card, since the 3c501 is slow, broken, and obsolete: you will
622 have problems. Some people suggest to ping ("man ping") a nearby
623 machine every minute ("man cron") when using this card.
624
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800625 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700626 will be called 3c501.
627
628config EL2
629 tristate "3c503 \"EtherLink II\" support"
630 depends on NET_VENDOR_3COM && ISA
631 select CRC32
632 help
633 If you have a network (Ethernet) card of this type, say Y and read
634 the Ethernet-HOWTO, available from
635 <http://www.tldp.org/docs.html#howto>.
636
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800637 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700638 will be called 3c503.
639
640config ELPLUS
641 tristate "3c505 \"EtherLink Plus\" support"
Al Viroa5532602005-05-04 05:39:42 +0100642 depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700643 ---help---
644 Information about this network (Ethernet) card can be found in
645 <file:Documentation/networking/3c505.txt>. If you have a card of
646 this type, say Y and read the Ethernet-HOWTO, available from
647 <http://www.tldp.org/docs.html#howto>.
648
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800649 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700650 will be called 3c505.
651
652config EL16
653 tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
654 depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
655 help
656 If you have a network (Ethernet) card of this type, say Y and read
657 the Ethernet-HOWTO, available from
658 <http://www.tldp.org/docs.html#howto>.
659
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800660 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700661 will be called 3c507.
662
663config EL3
664 tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
665 depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
666 ---help---
667 If you have a network (Ethernet) card belonging to the 3Com
668 EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
669 from <http://www.tldp.org/docs.html#howto>.
670
671 If your card is not working you may need to use the DOS
672 setup disk to disable Plug & Play mode, and to select the default
673 media type.
674
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800675 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700676 will be called 3c509.
677
678config 3C515
679 tristate "3c515 ISA \"Fast EtherLink\""
Al Viroa5532602005-05-04 05:39:42 +0100680 depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700681 help
682 If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
683 network card, say Y and read the Ethernet-HOWTO, available from
684 <http://www.tldp.org/docs.html#howto>.
685
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800686 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700687 will be called 3c515.
688
689config ELMC
690 tristate "3c523 \"EtherLink/MC\" support"
691 depends on NET_VENDOR_3COM && MCA_LEGACY
692 help
693 If you have a network (Ethernet) card of this type, say Y and read
694 the Ethernet-HOWTO, available from
695 <http://www.tldp.org/docs.html#howto>.
696
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800697 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700698 will be called 3c523.
699
700config ELMC_II
701 tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
702 depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
703 help
704 If you have a network (Ethernet) card of this type, say Y and read
705 the Ethernet-HOWTO, available from
706 <http://www.tldp.org/docs.html#howto>.
707
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800708 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700709 will be called 3c527.
710
711config VORTEX
712 tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
713 depends on NET_VENDOR_3COM && (PCI || EISA)
714 select MII
715 ---help---
Jon Mason47c51432006-02-12 11:53:04 -0600716 This option enables driver support for a large number of 10Mbps and
717 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700718
719 "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
720 "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
721 "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
722 "Tornado" (3c905) PCI
723 "Hurricane" (3c555/3cSOHO) PCI
724
725 If you have such a card, say Y and read the Ethernet-HOWTO,
726 available from <http://www.tldp.org/docs.html#howto>. More
727 specific information is in
728 <file:Documentation/networking/vortex.txt> and in the comments at
729 the beginning of <file:drivers/net/3c59x.c>.
730
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800731 To compile this support as a module, choose M here.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700732
733config TYPHOON
734 tristate "3cr990 series \"Typhoon\" support"
735 depends on NET_VENDOR_3COM && PCI
736 select CRC32
737 ---help---
738 This option enables driver support for the 3cr990 series of cards:
739
740 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
741 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
742 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
743
744 If you have a network (Ethernet) card of this type, say Y and read
745 the Ethernet-HOWTO, available from
746 <http://www.tldp.org/docs.html#howto>.
747
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800748 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700749 will be called typhoon.
750
751config LANCE
752 tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700753 depends on ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700754 help
755 If you have a network (Ethernet) card of this type, say Y and read
756 the Ethernet-HOWTO, available from
757 <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
758 of this type.
759
760 To compile this driver as a module, choose M here: the module
761 will be called lance. This is recommended.
762
763config NET_VENDOR_SMC
764 bool "Western Digital/SMC cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700765 depends on ISA || MCA || EISA || MAC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700766 help
767 If you have a network (Ethernet) card belonging to this class, say Y
768 and read the Ethernet-HOWTO, available from
769 <http://www.tldp.org/docs.html#howto>.
770
771 Note that the answer to this question doesn't directly affect the
772 kernel: saying N will just cause the configurator to skip all
773 the questions about Western Digital cards. If you say Y, you will be
774 asked for your specific card in the following questions.
775
776config WD80x3
777 tristate "WD80*3 support"
778 depends on NET_VENDOR_SMC && ISA
779 select CRC32
780 help
781 If you have a network (Ethernet) card of this type, say Y and read
782 the Ethernet-HOWTO, available from
783 <http://www.tldp.org/docs.html#howto>.
784
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800785 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700786 will be called wd.
787
788config ULTRAMCA
789 tristate "SMC Ultra MCA support"
790 depends on NET_VENDOR_SMC && MCA
791 select CRC32
792 help
793 If you have a network (Ethernet) card of this type and are running
794 an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
795 available from <http://www.tldp.org/docs.html#howto>.
796
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800797 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700798 will be called smc-mca.
799
800config ULTRA
801 tristate "SMC Ultra support"
802 depends on NET_VENDOR_SMC && ISA
803 select CRC32
804 ---help---
805 If you have a network (Ethernet) card of this type, say Y and read
806 the Ethernet-HOWTO, available from
807 <http://www.tldp.org/docs.html#howto>.
808
809 Important: There have been many reports that, with some motherboards
810 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
811 such as some BusLogic models) causes corruption problems with many
812 operating systems. The Linux smc-ultra driver has a work-around for
813 this but keep it in mind if you have such a SCSI card and have
814 problems.
815
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800816 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700817 will be called smc-ultra.
818
819config ULTRA32
820 tristate "SMC Ultra32 EISA support"
821 depends on NET_VENDOR_SMC && EISA
822 select CRC32
823 help
824 If you have a network (Ethernet) card of this type, say Y and read
825 the Ethernet-HOWTO, available from
826 <http://www.tldp.org/docs.html#howto>.
827
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800828 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700829 will be called smc-ultra32.
830
Bryan Wue190d6b2007-07-17 14:43:44 +0800831config BFIN_MAC
Mike Frysinger736783b2008-08-27 11:47:57 +0800832 tristate "Blackfin on-chip MAC support"
Sonic Zhang33a2a2b2009-01-08 10:52:26 -0800833 depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
Bryan Wue190d6b2007-07-17 14:43:44 +0800834 select CRC32
Bryan Wueeb70af2007-09-19 23:37:41 +0800835 select MII
836 select PHYLIB
Bryan Wue190d6b2007-07-17 14:43:44 +0800837 select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
838 help
Mike Frysinger736783b2008-08-27 11:47:57 +0800839 This is the driver for Blackfin on-chip mac device. Say Y if you want it
Bryan Wue190d6b2007-07-17 14:43:44 +0800840 compiled into the kernel. This driver is also available as a module
841 ( = code which can be inserted in and removed from the running kernel
842 whenever you want). The module will be called bfin_mac.
843
844config BFIN_MAC_USE_L1
845 bool "Use L1 memory for rx/tx packets"
Michael Hennerich6893ff12008-01-30 16:52:25 +0800846 depends on BFIN_MAC && (BF527 || BF537)
Bryan Wue190d6b2007-07-17 14:43:44 +0800847 default y
848 help
Matt LaPlante01dd2fb2007-10-20 01:34:40 +0200849 To get maximum network performance, you should use L1 memory as rx/tx buffers.
Bryan Wue190d6b2007-07-17 14:43:44 +0800850 Say N here if you want to reserve L1 memory for other uses.
851
852config BFIN_TX_DESC_NUM
853 int "Number of transmit buffer packets"
854 depends on BFIN_MAC
855 range 6 10 if BFIN_MAC_USE_L1
856 range 10 100
857 default "10"
858 help
859 Set the number of buffer packets used in driver.
860
861config BFIN_RX_DESC_NUM
862 int "Number of receive buffer packets"
863 depends on BFIN_MAC
864 range 20 100 if BFIN_MAC_USE_L1
865 range 20 800
866 default "20"
867 help
868 Set the number of buffer packets used in driver.
869
870config BFIN_MAC_RMII
871 bool "RMII PHY Interface (EXPERIMENTAL)"
872 depends on BFIN_MAC && EXPERIMENTAL
Michael Hennerich6893ff12008-01-30 16:52:25 +0800873 default y if BFIN527_EZKIT
874 default n if BFIN537_STAMP
Bryan Wue190d6b2007-07-17 14:43:44 +0800875 help
876 Use Reduced PHY MII Interface
877
Linus Torvalds1da177e2005-04-16 15:20:36 -0700878config SMC9194
879 tristate "SMC 9194 support"
880 depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
881 select CRC32
882 ---help---
883 This is support for the SMC9xxx based Ethernet cards. Choose this
884 option if you have a DELL laptop with the docking station, or
885 another SMC9192/9194 based chipset. Say Y if you want it compiled
886 into the kernel, and read the file
887 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
888 available from <http://www.tldp.org/docs.html#howto>.
889
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800890 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -0700891 will be called smc9194.
892
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700893config SMC91X
894 tristate "SMC 91C9x/91C1xxx support"
895 select CRC32
896 select MII
David Howellsb920de12008-02-08 04:19:31 -0800897 depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
Atsushi Nemotocde0d912008-10-21 00:00:29 +0900898 MIPS || BLACKFIN || MN10300
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700899 help
900 This is a driver for SMC's 91x series of Ethernet chipsets,
901 including the SMC91C94 and the SMC91C111. Say Y if you want it
902 compiled into the kernel, and read the file
903 <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
904 available from <http://www.linuxdoc.org/docs.html#howto>.
905
906 This driver is also available as a module ( = code which can be
907 inserted in and removed from the running kernel whenever you want).
908 The module will be called smc91x. If you want to compile it as a
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800909 module, say M here and read <file:Documentation/kbuild/modules.txt>.
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700910
Sascha Hauer92aa6742006-06-22 07:11:13 +0200911config NET_NETX
912 tristate "NetX Ethernet support"
913 select MII
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700914 depends on ARCH_NETX
Sascha Hauer92aa6742006-06-22 07:11:13 +0200915 help
916 This is support for the Hilscher netX builtin Ethernet ports
917
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800918 To compile this driver as a module, choose M here. The module
Sascha Hauer92aa6742006-06-22 07:11:13 +0200919 will be called netx-eth.
920
Sascha Hauera1365272005-05-05 15:14:15 -0700921config DM9000
922 tristate "DM9000 support"
Alex Landauf40d24d2007-07-12 12:11:48 +0800923 depends on ARM || BLACKFIN || MIPS
Sascha Hauera1365272005-05-05 15:14:15 -0700924 select CRC32
925 select MII
926 ---help---
927 Support for DM9000 chipset.
928
Adrian Bunk57ce45d2007-11-12 21:03:58 -0800929 To compile this driver as a module, choose M here. The module
930 will be called dm9000.
Sascha Hauera1365272005-05-05 15:14:15 -0700931
Ben Dooks485ca222008-06-24 22:16:06 +0100932config DM9000_DEBUGLEVEL
933 int "DM9000 maximum debug level"
934 depends on DM9000
935 default 4
936 help
937 The maximum level of debugging code compiled into the DM9000
938 driver.
939
Ben Dooksf8dd0ec2008-06-24 22:16:04 +0100940config DM9000_FORCE_SIMPLE_PHY_POLL
941 bool "Force simple NSR based PHY polling"
942 depends on DM9000
943 ---help---
944 This configuration forces the DM9000 to use the NSR's LinkStatus
945 bit to determine if the link is up or down instead of the more
946 costly MII PHY reads. Note, this will not work if the chip is
947 operating with an external PHY.
948
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100949config ENC28J60
950 tristate "ENC28J60 support"
951 depends on EXPERIMENTAL && SPI && NET_ETHERNET
952 select CRC32
953 ---help---
954 Support for the Microchip EN28J60 ethernet chip.
955
Johann Felix Soden2bfc79d2008-02-05 03:13:58 -0800956 To compile this driver as a module, choose M here. The module will be
Claudio Lanconelli3ec9c112008-01-14 11:00:28 +0100957 called enc28j60.
958
959config ENC28J60_WRITEVERIFY
960 bool "Enable write verify"
961 depends on ENC28J60
962 ---help---
963 Enable the verify after the buffer write useful for debugging purpose.
964 If unsure, say N.
965
Dustin McIntire0a0c72c2006-04-19 20:24:51 -0700966config SMC911X
967 tristate "SMSC LAN911[5678] support"
968 select CRC32
969 select MII
Catalin Marinasbd2c4972008-10-20 18:15:17 +0100970 depends on ARM || SUPERH
Dustin McIntire0a0c72c2006-04-19 20:24:51 -0700971 help
972 This is a driver for SMSC's LAN911x series of Ethernet chipsets
973 including the new LAN9115, LAN9116, LAN9117, and LAN9118.
974 Say Y if you want it compiled into the kernel,
975 and read the Ethernet-HOWTO, available from
976 <http://www.linuxdoc.org/docs.html#howto>.
977
978 This driver is also available as a module. The module will be
979 called smc911x. If you want to compile it as a module, say M
Alexander E. Patrakov39f5fb32007-03-16 18:28:43 +0500980 here and read <file:Documentation/kbuild/modules.txt>
Dustin McIntire0a0c72c2006-04-19 20:24:51 -0700981
Steve Glendinningfd9abb32008-11-05 00:35:37 +0000982config SMSC911X
983 tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
984 depends on ARM || SUPERH
985 select CRC32
986 select MII
987 select PHYLIB
988 ---help---
989 Say Y here if you want support for SMSC LAN911x and LAN921x families
990 of ethernet controllers.
991
992 To compile this driver as a module, choose M here and read
993 <file:Documentation/networking/net-modules.txt>. The module
994 will be called smsc911x.
995
Linus Torvalds1da177e2005-04-16 15:20:36 -0700996config NET_VENDOR_RACAL
997 bool "Racal-Interlan (Micom) NI cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -0700998 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -0700999 help
1000 If you have a network (Ethernet) card belonging to this class, such
1001 as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
1002 available from <http://www.tldp.org/docs.html#howto>.
1003
1004 Note that the answer to this question doesn't directly affect the
1005 kernel: saying N will just cause the configurator to skip all
1006 the questions about NI cards. If you say Y, you will be asked for
1007 your specific card in the following questions.
1008
1009config NI5010
1010 tristate "NI5010 support (EXPERIMENTAL)"
1011 depends on NET_VENDOR_RACAL && ISA && EXPERIMENTAL && BROKEN_ON_SMP
1012 ---help---
1013 If you have a network (Ethernet) card of this type, say Y and read
1014 the Ethernet-HOWTO, available from
1015 <http://www.tldp.org/docs.html#howto>. Note that this is still
1016 experimental code.
1017
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001018 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001019 will be called ni5010.
1020
1021config NI52
1022 tristate "NI5210 support"
1023 depends on NET_VENDOR_RACAL && ISA
1024 help
1025 If you have a network (Ethernet) card of this type, say Y and read
1026 the Ethernet-HOWTO, available from
1027 <http://www.tldp.org/docs.html#howto>.
1028
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001029 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001030 will be called ni52.
1031
1032config NI65
1033 tristate "NI6510 support"
Al Viroa5532602005-05-04 05:39:42 +01001034 depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001035 help
1036 If you have a network (Ethernet) card of this type, say Y and read
1037 the Ethernet-HOWTO, available from
1038 <http://www.tldp.org/docs.html#howto>.
1039
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001040 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001041 will be called ni65.
1042
1043source "drivers/net/tulip/Kconfig"
1044
1045config AT1700
1046 tristate "AT1700/1720 support (EXPERIMENTAL)"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001047 depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07001048 select CRC32
1049 ---help---
1050 If you have a network (Ethernet) card of this type, say Y and read
1051 the Ethernet-HOWTO, available from
1052 <http://www.tldp.org/docs.html#howto>.
1053
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001054 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001055 will be called at1700.
1056
1057config DEPCA
1058 tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001059 depends on ISA || EISA || MCA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001060 select CRC32
1061 ---help---
1062 If you have a network (Ethernet) card of this type, say Y and read
1063 the Ethernet-HOWTO, available from
1064 <http://www.tldp.org/docs.html#howto> as well as
1065 <file:drivers/net/depca.c>.
1066
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001067 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001068 will be called depca.
1069
1070config HP100
1071 tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001072 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001073 help
1074 If you have a network (Ethernet) card of this type, say Y and read
1075 the Ethernet-HOWTO, available from
1076 <http://www.tldp.org/docs.html#howto>.
1077
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001078 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001079 will be called hp100.
1080
1081config NET_ISA
1082 bool "Other ISA cards"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001083 depends on ISA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001084 ---help---
1085 If your network (Ethernet) card hasn't been mentioned yet and its
1086 bus system (that's the way the cards talks to the other components
1087 of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y.
1088 Make sure you know the name of your card. Read the Ethernet-HOWTO,
1089 available from <http://www.tldp.org/docs.html#howto>.
1090
1091 If unsure, say Y.
1092
1093 Note that the answer to this question doesn't directly affect the
1094 kernel: saying N will just cause the configurator to skip all
1095 the remaining ISA network card questions. If you say Y, you will be
1096 asked for your specific card in the following questions.
1097
1098config E2100
1099 tristate "Cabletron E21xx support"
1100 depends on NET_ISA
1101 select CRC32
1102 help
1103 If you have a network (Ethernet) card of this type, say Y and read
1104 the Ethernet-HOWTO, available from
1105 <http://www.tldp.org/docs.html#howto>.
1106
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001107 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108 will be called e2100.
1109
1110config EWRK3
1111 tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
1112 depends on NET_ISA
1113 select CRC32
1114 ---help---
1115 This driver supports the DE203, DE204 and DE205 network (Ethernet)
1116 cards. If this is for you, say Y and read
1117 <file:Documentation/networking/ewrk3.txt> in the kernel source as
1118 well as the Ethernet-HOWTO, available from
1119 <http://www.tldp.org/docs.html#howto>.
1120
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001121 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001122 will be called ewrk3.
1123
1124config EEXPRESS
1125 tristate "EtherExpress 16 support"
1126 depends on NET_ISA
1127 ---help---
1128 If you have an EtherExpress16 network (Ethernet) card, say Y and
1129 read the Ethernet-HOWTO, available from
1130 <http://www.tldp.org/docs.html#howto>. Note that the Intel
1131 EtherExpress16 card used to be regarded as a very poor choice
1132 because the driver was very unreliable. We now have a new driver
1133 that should do better.
1134
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001135 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001136 will be called eexpress.
1137
1138config EEXPRESS_PRO
1139 tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
1140 depends on NET_ISA
1141 ---help---
1142 If you have a network (Ethernet) card of this type, say Y. This
Jon Mason47c51432006-02-12 11:53:04 -06001143 driver supports Intel i82595{FX,TX} based boards. Note however
Linus Torvalds1da177e2005-04-16 15:20:36 -07001144 that the EtherExpress PRO/100 Ethernet card has its own separate
1145 driver. Please read the Ethernet-HOWTO, available from
1146 <http://www.tldp.org/docs.html#howto>.
1147
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001148 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001149 will be called eepro.
1150
Linus Torvalds1da177e2005-04-16 15:20:36 -07001151config HPLAN_PLUS
1152 tristate "HP PCLAN+ (27247B and 27252A) support"
1153 depends on NET_ISA
1154 select CRC32
1155 help
1156 If you have a network (Ethernet) card of this type, say Y and read
1157 the Ethernet-HOWTO, available from
1158 <http://www.tldp.org/docs.html#howto>.
1159
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001160 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001161 will be called hp-plus.
1162
1163config HPLAN
1164 tristate "HP PCLAN (27245 and other 27xxx series) support"
1165 depends on NET_ISA
1166 select CRC32
1167 help
1168 If you have a network (Ethernet) card of this type, say Y and read
1169 the Ethernet-HOWTO, available from
1170 <http://www.tldp.org/docs.html#howto>.
1171
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001172 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001173 will be called hp.
1174
1175config LP486E
1176 tristate "LP486E on board Ethernet"
1177 depends on NET_ISA
1178 help
1179 Say Y here to support the 82596-based on-board Ethernet controller
1180 for the Panther motherboard, which is one of the two shipped in the
1181 Intel Professional Workstation.
1182
1183config ETH16I
1184 tristate "ICL EtherTeam 16i/32 support"
1185 depends on NET_ISA
1186 help
1187 If you have a network (Ethernet) card of this type, say Y and read
1188 the Ethernet-HOWTO, available from
1189 <http://www.tldp.org/docs.html#howto>.
1190
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001191 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001192 will be called eth16i.
1193
1194config NE2000
1195 tristate "NE2000/NE1000 support"
Atsushi Nemotoc7e65c12008-08-08 00:55:17 +09001196 depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
Linus Torvalds1da177e2005-04-16 15:20:36 -07001197 select CRC32
1198 ---help---
1199 If you have a network (Ethernet) card of this type, say Y and read
1200 the Ethernet-HOWTO, available from
1201 <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
1202 without a specific driver are compatible with NE2000.
1203
1204 If you have a PCI NE2000 card however, say N here and Y to "PCI
Jesper Juhl28beaf62006-03-08 00:06:31 -08001205 NE2000 and clone support" under "EISA, VLB, PCI and on board
1206 controllers" below. If you have a NE2000 card and are running on
Linus Torvalds1da177e2005-04-16 15:20:36 -07001207 an MCA system (a bus system used on some IBM PS/2 computers and
1208 laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
1209 below.
1210
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001211 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001212 will be called ne.
1213
1214config ZNET
1215 tristate "Zenith Z-Note support (EXPERIMENTAL)"
Al Viroa5532602005-05-04 05:39:42 +01001216 depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -07001217 help
1218 The Zenith Z-Note notebook computer has a built-in network
1219 (Ethernet) card, and this is the Linux driver for it. Note that the
1220 IBM Thinkpad 300 is compatible with the Z-Note and is also supported
1221 by this driver. Read the Ethernet-HOWTO, available from
1222 <http://www.tldp.org/docs.html#howto>.
1223
1224config SEEQ8005
1225 tristate "SEEQ8005 support (EXPERIMENTAL)"
1226 depends on NET_ISA && EXPERIMENTAL
1227 help
1228 This is a driver for the SEEQ 8005 network (Ethernet) card. If this
1229 is for you, read the Ethernet-HOWTO, available from
1230 <http://www.tldp.org/docs.html#howto>.
1231
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001232 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001233 will be called seeq8005.
1234
Linus Torvalds1da177e2005-04-16 15:20:36 -07001235config NE2_MCA
1236 tristate "NE/2 (ne2000 MCA version) support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001237 depends on MCA_LEGACY
Linus Torvalds1da177e2005-04-16 15:20:36 -07001238 select CRC32
1239 help
1240 If you have a network (Ethernet) card of this type, say Y and read
1241 the Ethernet-HOWTO, available from
1242 <http://www.tldp.org/docs.html#howto>.
1243
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001244 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001245 will be called ne2.
1246
1247config IBMLANA
1248 tristate "IBM LAN Adapter/A support"
Adrian Bunke6353f32008-01-30 22:02:35 +02001249 depends on MCA
Linus Torvalds1da177e2005-04-16 15:20:36 -07001250 ---help---
1251 This is a Micro Channel Ethernet adapter. You need to set
1252 CONFIG_MCA to use this driver. It is both available as an in-kernel
1253 driver and as a module.
1254
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001255 To compile this driver as a module, choose M here. The only
Linus Torvalds1da177e2005-04-16 15:20:36 -07001256 currently supported card is the IBM LAN Adapter/A for Ethernet. It
1257 will both support 16K and 32K memory windows, however a 32K window
1258 gives a better security against packet losses. Usage of multiple
1259 boards with this driver should be possible, but has not been tested
1260 up to now due to lack of hardware.
1261
1262config IBMVETH
1263 tristate "IBM LAN Virtual Ethernet support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001264 depends on PPC_PSERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -07001265 ---help---
1266 This driver supports virtual ethernet adapters on newer IBM iSeries
1267 and pSeries systems.
1268
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001269 To compile this driver as a module, choose M here. The module will
Linus Torvalds1da177e2005-04-16 15:20:36 -07001270 be called ibmveth.
1271
David Gibson1d3bb992007-08-23 13:56:01 +10001272source "drivers/net/ibm_newemac/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001273
1274config NET_PCI
1275 bool "EISA, VLB, PCI and on board controllers"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001276 depends on ISA || EISA || PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001277 help
1278 This is another class of network cards which attach directly to the
1279 bus. If you have one of those, say Y and read the Ethernet-HOWTO,
1280 available from <http://www.tldp.org/docs.html#howto>.
1281
1282 Note that the answer to this question doesn't directly affect the
1283 kernel: saying N will just cause the configurator to skip all
1284 the questions about this class of network cards. If you say Y, you
1285 will be asked for your specific card in the following questions. If
1286 you are unsure, say Y.
1287
1288config PCNET32
1289 tristate "AMD PCnet32 PCI support"
1290 depends on NET_PCI && PCI
1291 select CRC32
1292 select MII
1293 help
1294 If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
1295 answer Y here and read the Ethernet-HOWTO, available from
1296 <http://www.tldp.org/docs.html#howto>.
1297
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001298 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001299 will be called pcnet32.
1300
1301config AMD8111_ETH
1302 tristate "AMD 8111 (new PCI lance) support"
1303 depends on NET_PCI && PCI
1304 select CRC32
1305 select MII
1306 help
1307 If you have an AMD 8111-based PCI lance ethernet card,
1308 answer Y here and read the Ethernet-HOWTO, available from
1309 <http://www.tldp.org/docs.html#howto>.
1310
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001311 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001312 will be called amd8111e.
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001313
Linus Torvalds1da177e2005-04-16 15:20:36 -07001314config ADAPTEC_STARFIRE
1315 tristate "Adaptec Starfire/DuraLAN support"
1316 depends on NET_PCI && PCI
1317 select CRC32
1318 select MII
1319 help
1320 Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
1321 adapter. The DuraLAN chip is used on the 64 bit PCI boards from
1322 Adaptec e.g. the ANA-6922A. The older 32 bit boards use the tulip
1323 driver.
1324
1325 To compile this driver as a module, choose M here: the module
1326 will be called starfire. This is recommended.
1327
Linus Torvalds1da177e2005-04-16 15:20:36 -07001328config AC3200
1329 tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
1330 depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
1331 select CRC32
1332 help
1333 If you have a network (Ethernet) card of this type, say Y and read
1334 the Ethernet-HOWTO, available from
1335 <http://www.tldp.org/docs.html#howto>.
1336
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001337 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001338 will be called ac3200.
1339
1340config APRICOT
1341 tristate "Apricot Xen-II on board Ethernet"
1342 depends on NET_PCI && ISA
1343 help
1344 If you have a network (Ethernet) controller of this type, say Y and
1345 read the Ethernet-HOWTO, available from
1346 <http://www.tldp.org/docs.html#howto>.
1347
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001348 To compile this driver as a module, choose M here. The module
1349 will be called apricot.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001350
1351config B44
Michael Buesch753f4922007-09-19 14:20:30 -07001352 tristate "Broadcom 440x/47xx ethernet support"
Al Viro46cb69c2008-05-21 06:32:11 +01001353 depends on SSB_POSSIBLE && HAS_DMA
Michael Buesch753f4922007-09-19 14:20:30 -07001354 select SSB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001355 select MII
1356 help
Michael Buesch753f4922007-09-19 14:20:30 -07001357 If you have a network (Ethernet) controller of this type, say Y
1358 or M and read the Ethernet-HOWTO, available from
Linus Torvalds1da177e2005-04-16 15:20:36 -07001359 <http://www.tldp.org/docs.html#howto>.
1360
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001361 To compile this driver as a module, choose M here. The module
1362 will be called b44.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001363
Michael Buesch753f4922007-09-19 14:20:30 -07001364# Auto-select SSB PCI-HOST support, if possible
1365config B44_PCI_AUTOSELECT
1366 bool
1367 depends on B44 && SSB_PCIHOST_POSSIBLE
1368 select SSB_PCIHOST
1369 default y
1370
1371# Auto-select SSB PCICORE driver, if possible
1372config B44_PCICORE_AUTOSELECT
1373 bool
1374 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
1375 select SSB_DRIVER_PCICORE
1376 default y
1377
1378config B44_PCI
1379 bool
1380 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
1381 default y
1382
Linus Torvalds1da177e2005-04-16 15:20:36 -07001383config FORCEDETH
Adrian Bunk82770082006-03-08 00:06:30 -08001384 tristate "nForce Ethernet support"
1385 depends on NET_PCI && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07001386 help
1387 If you have a network (Ethernet) controller of this type, say Y and
1388 read the Ethernet-HOWTO, available from
1389 <http://www.tldp.org/docs.html#howto>.
1390
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001391 To compile this driver as a module, choose M here. The module
1392 will be called forcedeth.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001393
Stephen Hemmingere27cdba2006-07-31 20:37:19 -07001394config FORCEDETH_NAPI
Randy Dunlapbf45abe2007-10-18 17:16:20 -07001395 bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
Stephen Hemmingere27cdba2006-07-31 20:37:19 -07001396 depends on FORCEDETH && EXPERIMENTAL
1397 help
1398 NAPI is a new driver API designed to reduce CPU and interrupt load
1399 when the driver is receiving lots of packets from the card. It is
1400 still somewhat experimental and thus not yet enabled by default.
1401
1402 If your estimated Rx load is 10kpps or more, or if the card will be
1403 deployed on potentially unfriendly networks (e.g. in a firewall),
1404 then say Y here.
1405
Stephen Hemmingere27cdba2006-07-31 20:37:19 -07001406 If in doubt, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001407
1408config CS89x0
1409 tristate "CS89x0 support"
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001410 depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
1411 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001412 ---help---
1413 Support for CS89x0 chipset based Ethernet cards. If you have a
1414 network (Ethernet) card of this type, say Y and read the
1415 Ethernet-HOWTO, available from
1416 <http://www.tldp.org/docs.html#howto> as well as
1417 <file:Documentation/networking/cs89x0.txt>.
1418
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001419 To compile this driver as a module, choose M here. The module
1420 will be called cs89x0.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001421
Gilles Chanteperdrix0ac4ed92008-09-26 15:44:43 +01001422config CS89x0_NONISA_IRQ
1423 def_bool y
1424 depends on CS89x0 != n
1425 depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS
1426
Linus Torvalds1da177e2005-04-16 15:20:36 -07001427config TC35815
1428 tristate "TOSHIBA TC35815 Ethernet support"
Atsushi Nemotoeea221ce2007-03-03 23:54:59 +09001429 depends on NET_PCI && PCI && MIPS
Atsushi Nemotoc6686fe2008-04-12 00:47:46 +09001430 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07001431
Linus Torvalds1da177e2005-04-16 15:20:36 -07001432config E100
1433 tristate "Intel(R) PRO/100+ support"
1434 depends on NET_PCI && PCI
1435 select MII
1436 ---help---
1437 This driver supports Intel(R) PRO/100 family of adapters.
1438 To verify that your adapter is supported, find the board ID number
1439 on the adapter. Look for a label that has a barcode and a number
1440 in the format 123456-001 (six digits hyphen three digits).
1441
1442 Use the above information and the Adapter & Driver ID Guide at:
1443
1444 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1445
1446 to identify the adapter.
1447
1448 For the latest Intel PRO/100 network driver for Linux, see:
1449
1450 <http://appsr.intel.com/scripts-df/support_intel.asp>
1451
1452 More specific information on configuring the driver is in
1453 <file:Documentation/networking/e100.txt>.
1454
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001455 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001456 will be called e100.
1457
1458config LNE390
1459 tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
1460 depends on NET_PCI && EISA && EXPERIMENTAL
1461 select CRC32
1462 help
1463 If you have a network (Ethernet) card of this type, say Y and read
1464 the Ethernet-HOWTO, available from
1465 <http://www.tldp.org/docs.html#howto>.
1466
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001467 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001468 will be called lne390.
1469
1470config FEALNX
1471 tristate "Myson MTD-8xx PCI Ethernet support"
1472 depends on NET_PCI && PCI
1473 select CRC32
1474 select MII
1475 help
1476 Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
1477 cards. Specifications and data at
1478 <http://www.myson.com.hk/mtd/datasheet/>.
1479
1480config NATSEMI
1481 tristate "National Semiconductor DP8381x series PCI Ethernet support"
1482 depends on NET_PCI && PCI
1483 select CRC32
1484 help
1485 This driver is for the National Semiconductor DP83810 series,
1486 which is used in cards from PureData, NetGear, Linksys
1487 and others, including the 83815 chip.
1488 More specific information and updates are available from
1489 <http://www.scyld.com/network/natsemi.html>.
1490
1491config NE2K_PCI
1492 tristate "PCI NE2000 and clones support (see help)"
1493 depends on NET_PCI && PCI
1494 select CRC32
1495 ---help---
1496 This driver is for NE2000 compatible PCI cards. It will not work
1497 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
1498 support" below). If you have a PCI NE2000 network (Ethernet) card,
1499 say Y and read the Ethernet-HOWTO, available from
1500 <http://www.tldp.org/docs.html#howto>.
1501
1502 This driver also works for the following NE2000 clone cards:
1503 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
1504 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
1505 Holtek HT80232 Holtek HT80229
1506
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001507 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001508 will be called ne2k-pci.
1509
1510config NE3210
1511 tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
1512 depends on NET_PCI && EISA && EXPERIMENTAL
1513 select CRC32
1514 ---help---
1515 If you have a network (Ethernet) card of this type, say Y and read
1516 the Ethernet-HOWTO, available from
1517 <http://www.tldp.org/docs.html#howto>. Note that this driver
1518 will NOT WORK for NE3200 cards as they are completely different.
1519
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001520 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001521 will be called ne3210.
1522
1523config ES3210
1524 tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
1525 depends on NET_PCI && EISA && EXPERIMENTAL
1526 select CRC32
1527 help
1528 If you have a network (Ethernet) card of this type, say Y and read
1529 the Ethernet-HOWTO, available from
1530 <http://www.tldp.org/docs.html#howto>.
1531
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001532 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001533 will be called es3210.
1534
1535config 8139CP
1536 tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
1537 depends on NET_PCI && PCI && EXPERIMENTAL
1538 select CRC32
1539 select MII
1540 help
1541 This is a driver for the Fast Ethernet PCI network cards based on
1542 the RTL8139C+ chips. If you have one of those, say Y and read
1543 the Ethernet-HOWTO, available from
1544 <http://www.tldp.org/docs.html#howto>.
1545
1546 To compile this driver as a module, choose M here: the module
1547 will be called 8139cp. This is recommended.
1548
1549config 8139TOO
Adrian Bunkf04e3f02005-05-16 21:13:03 +02001550 tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001551 depends on NET_PCI && PCI
1552 select CRC32
1553 select MII
1554 ---help---
1555 This is a driver for the Fast Ethernet PCI network cards based on
Adrian Bunkf04e3f02005-05-16 21:13:03 +02001556 the RTL 8129/8130/8139 chips. If you have one of those, say Y and
1557 read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001558
1559 To compile this driver as a module, choose M here: the module
1560 will be called 8139too. This is recommended.
1561
1562config 8139TOO_PIO
1563 bool "Use PIO instead of MMIO"
1564 default y
1565 depends on 8139TOO
1566 help
1567 This instructs the driver to use programmed I/O ports (PIO) instead
1568 of PCI shared memory (MMIO). This can possibly solve some problems
1569 in case your mainboard has memory consistency issues. If unsure,
1570 say N.
1571
1572config 8139TOO_TUNE_TWISTER
1573 bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
1574 depends on 8139TOO
1575 help
1576 This implements a function which might come in handy in case you
1577 are using low quality on long cabling. It is required for RealTek
1578 RTL-8139 revision K boards, and totally unused otherwise. It tries
1579 to match the transceiver to the cable characteristics. This is
1580 experimental since hardly documented by the manufacturer.
1581 If unsure, say Y.
1582
1583config 8139TOO_8129
1584 bool "Support for older RTL-8129/8130 boards"
1585 depends on 8139TOO
1586 help
1587 This enables support for the older and uncommon RTL-8129 and
1588 RTL-8130 chips, which support MII via an external transceiver,
1589 instead of an internal one. Disabling this option will save some
1590 memory by making the code size smaller. If unsure, say Y.
1591
1592config 8139_OLD_RX_RESET
1593 bool "Use older RX-reset method"
1594 depends on 8139TOO
1595 help
1596 The 8139too driver was recently updated to contain a more rapid
1597 reset sequence, in the face of severe receive errors. This "new"
1598 RX-reset method should be adequate for all boards. But if you
1599 experience problems, you can enable this option to restore the
1600 old RX-reset behavior. If unsure, say N.
1601
Sten Wang7a47dd72007-11-12 21:31:11 -08001602config R6040
Florian Fainelli68334112009-01-08 15:04:50 +00001603 tristate "RDC R6040 Fast Ethernet Adapter support"
Sten Wang7a47dd72007-11-12 21:31:11 -08001604 depends on NET_PCI && PCI
1605 select CRC32
1606 select MII
1607 help
1608 This is a driver for the R6040 Fast Ethernet MACs found in the
1609 the RDC R-321x System-on-chips.
1610
1611 To compile this driver as a module, choose M here: the module
1612 will be called r6040. This is recommended.
1613
Linus Torvalds1da177e2005-04-16 15:20:36 -07001614config SIS900
1615 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
1616 depends on NET_PCI && PCI
1617 select CRC32
Adrian Bunk6da0f682005-04-30 13:52:49 +02001618 select MII
Linus Torvalds1da177e2005-04-16 15:20:36 -07001619 ---help---
1620 This is a driver for the Fast Ethernet PCI network cards based on
1621 the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
Adrian Bunkc3cf5602006-03-04 17:07:57 +01001622 SiS 630 and SiS 540 chipsets.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001623
1624 This driver also supports AMD 79C901 HomePNA so that you can use
1625 your phone line as a network cable.
1626
1627 To compile this driver as a module, choose M here: the module
1628 will be called sis900. This is recommended.
1629
1630config EPIC100
1631 tristate "SMC EtherPower II"
1632 depends on NET_PCI && PCI
1633 select CRC32
1634 select MII
1635 help
1636 This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
1637 which is based on the SMC83c17x (EPIC/100).
1638 More specific information and updates are available from
1639 <http://www.scyld.com/network/epic100.html>.
1640
Steve Glendinning2cb37722008-12-11 20:54:30 -08001641config SMSC9420
1642 tristate "SMSC LAN9420 PCI ethernet adapter support"
1643 depends on NET_PCI && PCI
1644 select CRC32
1645 select PHYLIB
1646 select SMSC_PHY
1647 help
1648 This is a driver for SMSC's LAN9420 PCI ethernet adapter.
1649 Say Y if you want it compiled into the kernel,
1650 and read the Ethernet-HOWTO, available from
1651 <http://www.linuxdoc.org/docs.html#howto>.
1652
1653 This driver is also available as a module. The module will be
1654 called smsc9420. If you want to compile it as a module, say M
1655 here and read <file:Documentation/kbuild/modules.txt>
1656
Linus Torvalds1da177e2005-04-16 15:20:36 -07001657config SUNDANCE
1658 tristate "Sundance Alta support"
1659 depends on NET_PCI && PCI
1660 select CRC32
1661 select MII
1662 help
1663 This driver is for the Sundance "Alta" chip.
1664 More specific information and updates are available from
1665 <http://www.scyld.com/network/sundance.html>.
1666
1667config SUNDANCE_MMIO
1668 bool "Use MMIO instead of PIO"
1669 depends on SUNDANCE
1670 help
1671 Enable memory-mapped I/O for interaction with Sundance NIC registers.
1672 Do NOT enable this by default, PIO (enabled when MMIO is disabled)
1673 is known to solve bugs on certain chips.
1674
1675 If unsure, say N.
1676
1677config TLAN
1678 tristate "TI ThunderLAN support"
Stephen Hemminger93e16842008-05-30 09:49:55 -07001679 depends on NET_PCI && (PCI || EISA)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001680 ---help---
1681 If you have a PCI Ethernet network card based on the ThunderLAN chip
1682 which is supported by this driver, say Y and read the
1683 Ethernet-HOWTO, available from
1684 <http://www.tldp.org/docs.html#howto>.
1685
1686 Devices currently supported by this driver are Compaq Netelligent,
1687 Compaq NetFlex and Olicom cards. Please read the file
1688 <file:Documentation/networking/tlan.txt> for more details.
1689
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001690 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001691 will be called tlan.
1692
1693 Please email feedback to <torben.mathiasen@compaq.com>.
1694
1695config VIA_RHINE
1696 tristate "VIA Rhine support"
1697 depends on NET_PCI && PCI
1698 select CRC32
1699 select MII
1700 help
1701 If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
1702 Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type
1703 Ethernet functions can also be found integrated on South Bridges
1704 (e.g. VT8235).
1705
1706 To compile this driver as a module, choose M here. The module
1707 will be called via-rhine.
1708
1709config VIA_RHINE_MMIO
1710 bool "Use MMIO instead of PIO"
1711 depends on VIA_RHINE
1712 help
1713 This instructs the driver to use PCI shared memory (MMIO) instead of
1714 programmed I/O ports (PIO). Enabling this gives an improvement in
1715 processing time in parts of the driver.
1716
1717 If unsure, say Y.
1718
Cesar Eduardo Barrosbf345702006-12-19 13:08:47 -08001719config SC92031
1720 tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
1721 depends on NET_PCI && PCI && EXPERIMENTAL
1722 select CRC32
1723 ---help---
1724 This is a driver for the Fast Ethernet PCI network cards based on
1725 the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
1726 have one of these, say Y here.
1727
1728 To compile this driver as a module, choose M here: the module
1729 will be called sc92031. This is recommended.
1730
Matteo Croced95b39c2007-10-14 18:10:13 +02001731config CPMAC
1732 tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
Anton Vorontsov8353ec72008-01-21 23:49:53 +03001733 depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
Matteo Croced95b39c2007-10-14 18:10:13 +02001734 select PHYLIB
Matteo Croced95b39c2007-10-14 18:10:13 +02001735 help
1736 TI AR7 CPMAC Ethernet support
1737
Linus Torvalds1da177e2005-04-16 15:20:36 -07001738config NET_POCKET
1739 bool "Pocket and portable adapters"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001740 depends on PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001741 ---help---
1742 Cute little network (Ethernet) devices which attach to the parallel
1743 port ("pocket adapters"), commonly used with laptops. If you have
1744 one of those, say Y and read the Ethernet-HOWTO, available from
1745 <http://www.tldp.org/docs.html#howto>.
1746
1747 If you want to plug a network (or some other) card into the PCMCIA
1748 (or PC-card) slot of your laptop instead (PCMCIA is the standard for
1749 credit card size extension cards used by all modern laptops), you
1750 need the pcmcia-cs package (location contained in the file
1751 <file:Documentation/Changes>) and you can say N here.
1752
1753 Laptop users should read the Linux Laptop home page at
1754 <http://www.linux-on-laptops.com/> or
1755 Tuxmobil - Linux on Mobile Computers at <http://www.tuxmobil.org/>.
1756
1757 Note that the answer to this question doesn't directly affect the
1758 kernel: saying N will just cause the configurator to skip all
1759 the questions about this class of network devices. If you say Y, you
1760 will be asked for your specific device in the following questions.
1761
1762config ATP
1763 tristate "AT-LAN-TEC/RealTek pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001764 depends on NET_POCKET && PARPORT && X86
Linus Torvalds1da177e2005-04-16 15:20:36 -07001765 select CRC32
1766 ---help---
1767 This is a network (Ethernet) device which attaches to your parallel
1768 port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
1769 available from <http://www.tldp.org/docs.html#howto>, if you
1770 want to use this. If you intend to use this driver, you should have
1771 said N to the "Parallel printer support", because the two drivers
1772 don't like each other.
1773
1774 To compile this driver as a module, choose M here: the module
1775 will be called atp.
1776
1777config DE600
1778 tristate "D-Link DE600 pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001779 depends on NET_POCKET && PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001780 ---help---
1781 This is a network (Ethernet) device which attaches to your parallel
1782 port. Read <file:Documentation/networking/DLINK.txt> as well as the
1783 Ethernet-HOWTO, available from
1784 <http://www.tldp.org/docs.html#howto>, if you want to use
1785 this. It is possible to have several devices share a single parallel
1786 port and it is safe to compile the corresponding drivers into the
1787 kernel.
1788
1789 To compile this driver as a module, choose M here: the module
1790 will be called de600.
1791
1792config DE620
1793 tristate "D-Link DE620 pocket adapter support"
Grant Coady32fa2bf2005-09-10 00:14:05 +10001794 depends on NET_POCKET && PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07001795 ---help---
1796 This is a network (Ethernet) device which attaches to your parallel
1797 port. Read <file:Documentation/networking/DLINK.txt> as well as the
1798 Ethernet-HOWTO, available from
1799 <http://www.tldp.org/docs.html#howto>, if you want to use
1800 this. It is possible to have several devices share a single parallel
1801 port and it is safe to compile the corresponding drivers into the
1802 kernel.
1803
1804 To compile this driver as a module, choose M here: the module
1805 will be called de620.
1806
1807config SGISEEQ
1808 tristate "SGI Seeq ethernet controller support"
Thomas Bogendoerfer49b11bc2007-12-19 13:42:36 +01001809 depends on SGI_HAS_SEEQ
Linus Torvalds1da177e2005-04-16 15:20:36 -07001810 help
1811 Say Y here if you have an Seeq based Ethernet network card. This is
1812 used in many Silicon Graphics machines.
1813
1814config DECLANCE
1815 tristate "DEC LANCE ethernet controller support"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001816 depends on MACH_DECSTATION
Linus Torvalds1da177e2005-04-16 15:20:36 -07001817 select CRC32
1818 help
1819 This driver is for the series of Ethernet controllers produced by
1820 DEC (now Compaq) based on the AMD Lance chipset, including the
1821 DEPCA series. (This chipset is better known via the NE2100 cards.)
1822
1823config 68360_ENET
1824 bool "Motorola 68360 ethernet controller"
1825 depends on M68360
1826 help
1827 Say Y here if you want to use the built-in ethernet controller of
1828 the Motorola 68360 processor.
1829
1830config FEC
Greg Ungerer2af69212005-09-12 11:18:10 +10001831 bool "FEC ethernet controller (of ColdFire CPUs)"
Matt Waddeld4732d32009-01-13 17:13:06 +10001832 depends on M523x || M527x || M5272 || M528x || M520x || M532x
Linus Torvalds1da177e2005-04-16 15:20:36 -07001833 help
1834 Say Y here if you want to use the built-in 10/100 Fast ethernet
Greg Ungerer2af69212005-09-12 11:18:10 +10001835 controller on some Motorola ColdFire processors.
1836
1837config FEC2
1838 bool "Second FEC ethernet controller (on some ColdFire CPUs)"
1839 depends on FEC
1840 help
1841 Say Y here if you want to use the second built-in 10/100 Fast
1842 ethernet controller on some Motorola ColdFire processors.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001843
Domen Puncer5d031e92007-10-26 18:07:49 +02001844config FEC_MPC52xx
1845 tristate "MPC52xx FEC driver"
Grant Likely847cdf42008-11-14 05:19:00 -07001846 depends on PPC_MPC52xx && PPC_BESTCOMM
Domen Puncer5d031e92007-10-26 18:07:49 +02001847 select CRC32
1848 select PHYLIB
Grant Likely847cdf42008-11-14 05:19:00 -07001849 select PPC_BESTCOMM_FEC
Domen Puncer5d031e92007-10-26 18:07:49 +02001850 ---help---
1851 This option enables support for the MPC5200's on-chip
1852 Fast Ethernet Controller
1853 If compiled as module, it will be called 'fec_mpc52xx.ko'.
1854
1855config FEC_MPC52xx_MDIO
1856 bool "MPC52xx FEC MDIO bus driver"
1857 depends on FEC_MPC52xx
1858 default y
1859 ---help---
1860 The MPC5200's FEC can connect to the Ethernet either with
1861 an external MII PHY chip or 10 Mbps 7-wire interface
1862 (Motorola? industry standard).
1863 If your board uses an external PHY connected to FEC, enable this.
1864 If not sure, enable.
1865 If compiled as module, it will be called 'fec_mpc52xx_phy.ko'.
1866
Linus Torvalds1da177e2005-04-16 15:20:36 -07001867config NE_H8300
1868 tristate "NE2000 compatible support for H8/300"
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001869 depends on H8300
Linus Torvalds1da177e2005-04-16 15:20:36 -07001870 help
1871 Say Y here if you want to use the NE2000 compatible
1872 controller on the Renesas H8/300 processor.
1873
Chris Snook452c1ce2008-09-14 19:56:10 -05001874config ATL2
1875 tristate "Atheros L2 Fast Ethernet support"
1876 depends on PCI
1877 select CRC32
1878 select MII
1879 help
1880 This driver supports the Atheros L2 fast ethernet adapter.
1881
1882 To compile this driver as a module, choose M here. The module
1883 will be called atl2.
1884
Pantelis Antoniou48257c42005-10-28 16:25:58 -04001885source "drivers/net/fs_enet/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001886
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07001887endif # NET_ETHERNET
Linus Torvalds1da177e2005-04-16 15:20:36 -07001888
1889#
1890# Gigabit Ethernet
1891#
1892
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001893menuconfig NETDEV_1000
1894 bool "Ethernet (1000 Mbit)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07001895 depends on !UML
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001896 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02001897 ---help---
1898 Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
1899 type of Local Area Network (LAN) in universities and companies.
1900
1901 Say Y here to get to see options for Gigabit Ethernet drivers.
1902 This option alone does not add any kernel code.
1903 Note that drivers supporting both 100 and 1000 MBit may be listed
1904 under "Ethernet (10 or 100MBit)" instead.
1905
1906 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardtf30486d2007-05-10 22:52:56 -07001907
1908if NETDEV_1000
Linus Torvalds1da177e2005-04-16 15:20:36 -07001909
1910config ACENIC
1911 tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
1912 depends on PCI
1913 ---help---
1914 Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
1915 GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
1916 adapter. The driver allows for using the Jumbo Frame option (9000
1917 bytes/frame) however it requires that your switches can handle this
1918 as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
1919 line.
1920
1921 To compile this driver as a module, choose M here: the
1922 module will be called acenic.
1923
1924config ACENIC_OMIT_TIGON_I
1925 bool "Omit support for old Tigon I based AceNICs"
1926 depends on ACENIC
1927 help
1928 Say Y here if you only have Tigon II based AceNICs and want to leave
1929 out support for the older Tigon I based cards which are no longer
1930 being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
1931 version)). This will reduce the size of the driver object by
1932 app. 100KB. If you are not sure whether your card is a Tigon I or a
1933 Tigon II, say N here.
1934
1935 The safe and default value for this is N.
1936
1937config DL2K
Komurodf950822007-08-13 09:45:41 +09001938 tristate "DL2000/TC902x-based Gigabit Ethernet support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07001939 depends on PCI
1940 select CRC32
1941 help
Komurodf950822007-08-13 09:45:41 +09001942 This driver supports DL2000/TC902x-based Gigabit ethernet cards,
1943 which includes
Linus Torvalds1da177e2005-04-16 15:20:36 -07001944 D-Link DGE-550T Gigabit Ethernet Adapter.
1945 D-Link DL2000-based Gigabit Ethernet Adapter.
Komurodf950822007-08-13 09:45:41 +09001946 Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001947
1948 To compile this driver as a module, choose M here: the
1949 module will be called dl2k.
1950
1951config E1000
1952 tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
1953 depends on PCI
1954 ---help---
1955 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
1956 adapters. For more information on how to identify your adapter, go
1957 to the Adapter & Driver ID Guide at:
1958
1959 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1960
1961 For general information and support, go to the Intel support
1962 website at:
1963
1964 <http://support.intel.com>
1965
1966 More specific information on configuring the driver is in
1967 <file:Documentation/networking/e1000.txt>.
1968
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001969 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07001970 will be called e1000.
1971
Auke Kokbc7f75f2007-09-17 12:30:59 -07001972config E1000E
1973 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
Al Viro7ac86bf2008-04-27 06:15:42 +01001974 depends on PCI && (!SPARC32 || BROKEN)
Auke Kokbc7f75f2007-09-17 12:30:59 -07001975 ---help---
1976 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
1977 ethernet family of adapters. For PCI or PCI-X e1000 adapters,
1978 use the regular e1000 driver For more information on how to
1979 identify your adapter, go to the Adapter & Driver ID Guide at:
1980
1981 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
1982
1983 For general information and support, go to the Intel support
1984 website at:
1985
1986 <http://support.intel.com>
1987
Adrian Bunk57ce45d2007-11-12 21:03:58 -08001988 To compile this driver as a module, choose M here. The module
Auke Kokbc7f75f2007-09-17 12:30:59 -07001989 will be called e1000e.
1990
Stephen Hemmingerab7a9832008-01-01 09:27:58 -08001991config IP1000
1992 tristate "IP1000 Gigabit Ethernet support"
1993 depends on PCI && EXPERIMENTAL
1994 select MII
1995 ---help---
1996 This driver supports IP1000 gigabit Ethernet cards.
1997
1998 To compile this driver as a module, choose M here: the module
1999 will be called ipg. This is recommended.
2000
Auke Kok9d5c8242008-01-24 02:22:38 -08002001config IGB
Alexander Duyck3ef6b232008-11-20 00:46:57 -08002002 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
Auke Kok9d5c8242008-01-24 02:22:38 -08002003 depends on PCI
2004 ---help---
Alexander Duyck3ef6b232008-11-20 00:46:57 -08002005 This driver supports Intel(R) 82575/82576 gigabit ethernet family of
Auke Kok9d5c8242008-01-24 02:22:38 -08002006 adapters. For more information on how to identify your adapter, go
2007 to the Adapter & Driver ID Guide at:
2008
2009 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2010
2011 For general information and support, go to the Intel support
2012 website at:
2013
2014 <http://support.intel.com>
2015
2016 More specific information on configuring the driver is in
2017 <file:Documentation/networking/e1000.txt>.
2018
Johann Felix Soden2bfc79d2008-02-05 03:13:58 -08002019 To compile this driver as a module, choose M here. The module
Auke Kok9d5c8242008-01-24 02:22:38 -08002020 will be called igb.
2021
Alexander Duyckd3352522008-07-08 15:12:13 -07002022config IGB_LRO
2023 bool "Use software LRO"
2024 depends on IGB && INET
2025 select INET_LRO
2026 ---help---
2027 Say Y here if you want to use large receive offload.
2028
2029 If in doubt, say N.
2030
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002031config IGB_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002032 bool "Direct Cache Access (DCA) Support"
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002033 default y
2034 depends on IGB && DCA && !(IGB=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002035 ---help---
2036 Say Y here if you want to use Direct Cache Access (DCA) in the
2037 driver. DCA is a method for warming the CPU cache before data
2038 is used, with the intent of lessening the impact of cache misses.
Jeff Kirsher421e02f2008-10-17 11:08:31 -07002039
Lennert Buytenhek15d014d2005-11-11 18:23:13 +01002040source "drivers/net/ixp2000/Kconfig"
2041
Linus Torvalds1da177e2005-04-16 15:20:36 -07002042config MYRI_SBUS
2043 tristate "MyriCOM Gigabit Ethernet support"
2044 depends on SBUS
2045 help
2046 This driver supports MyriCOM Sbus gigabit Ethernet cards.
2047
2048 To compile this driver as a module, choose M here: the module
2049 will be called myri_sbus. This is recommended.
2050
2051config NS83820
Jon Mason47c51432006-02-12 11:53:04 -06002052 tristate "National Semiconductor DP83820 support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002053 depends on PCI
2054 help
2055 This is a driver for the National Semiconductor DP83820 series
2056 of gigabit ethernet MACs. Cards using this chipset include
2057 the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
2058 SOHO-GA2000T, SOHO-GA2500T. The driver supports the use of
2059 zero copy.
2060
2061config HAMACHI
2062 tristate "Packet Engines Hamachi GNIC-II support"
2063 depends on PCI
2064 select MII
2065 help
2066 If you have a Gigabit Ethernet card of this type, say Y and read
2067 the Ethernet-HOWTO, available from
2068 <http://www.tldp.org/docs.html#howto>.
2069
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002070 To compile this driver as a module, choose M here. The module will be
Linus Torvalds1da177e2005-04-16 15:20:36 -07002071 called hamachi.
2072
2073config YELLOWFIN
2074 tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
2075 depends on PCI && EXPERIMENTAL
2076 select CRC32
2077 ---help---
2078 Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
2079 adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
2080 used by the Beowulf Linux cluster project. See
2081 <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
2082 information about this driver in particular and Beowulf in general.
2083
2084 To compile this driver as a module, choose M here: the module
2085 will be called yellowfin. This is recommended.
2086
2087config R8169
2088 tristate "Realtek 8169 gigabit ethernet support"
2089 depends on PCI
2090 select CRC32
Francois Romieub7372492008-09-13 15:04:38 +02002091 select MII
Linus Torvalds1da177e2005-04-16 15:20:36 -07002092 ---help---
2093 Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
2094
2095 To compile this driver as a module, choose M here: the module
2096 will be called r8169. This is recommended.
2097
Linus Torvalds1da177e2005-04-16 15:20:36 -07002098config R8169_VLAN
2099 bool "VLAN support"
2100 depends on R8169 && VLAN_8021Q
2101 ---help---
2102 Say Y here for the r8169 driver to support the functions required
2103 by the kernel 802.1Q code.
Francois Romieu865c6522008-05-11 14:51:00 +02002104
Linus Torvalds1da177e2005-04-16 15:20:36 -07002105 If in doubt, say Y.
2106
Maciej W. Rozycki1a9e8542007-09-14 12:05:00 +01002107config SB1250_MAC
Maciej W. Rozycki25a72df2007-09-14 11:57:33 +01002108 tristate "SB1250 Gigabit Ethernet support"
2109 depends on SIBYTE_SB1xxx_SOC
Maciej W. Rozyckif5279ff2007-09-21 12:52:10 +01002110 select PHYLIB
Maciej W. Rozycki25a72df2007-09-14 11:57:33 +01002111 ---help---
2112 This driver supports Gigabit Ethernet interfaces based on the
2113 Broadcom SiByte family of System-On-a-Chip parts. They include
2114 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
2115 and BCM1480 chips.
2116
2117 To compile this driver as a module, choose M here: the module
2118 will be called sb1250-mac.
2119
Francois Romieu890e8d02005-07-30 13:08:43 +02002120config SIS190
Francois Romieue7976372005-09-03 00:57:51 +02002121 tristate "SiS190/SiS191 gigabit ethernet support"
Adrian Bunke9985d52005-08-09 02:41:00 +02002122 depends on PCI
2123 select CRC32
2124 select MII
2125 ---help---
Francois Romieue7976372005-09-03 00:57:51 +02002126 Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
2127 a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
2128 appear in lan on motherboard designs which are based on SiS 965
2129 and SiS 966 south bridge.
Francois Romieu890e8d02005-07-30 13:08:43 +02002130
Adrian Bunke9985d52005-08-09 02:41:00 +02002131 To compile this driver as a module, choose M here: the module
2132 will be called sis190. This is recommended.
Francois Romieu890e8d02005-07-30 13:08:43 +02002133
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002134config SKGE
Stephen Hemminger7a160c72006-02-13 15:48:08 -08002135 tristate "New SysKonnect GigaEthernet support"
2136 depends on PCI
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002137 select CRC32
2138 ---help---
2139 This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
2140 and related Gigabit Ethernet adapters. It is a new smaller driver
Stephen Hemminger46a60f22005-09-09 12:54:56 -07002141 with better performance and more complete ethtool support.
Stephen Hemmingerbaef58b2005-05-12 20:14:36 -04002142
2143 It does not support the link failover and network management
Stephen Hemminger5ad887f2007-09-15 19:35:14 -04002144 features that "portable" vendor supplied sk98lin driver does.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002145
Daniel Drakec6f0d752006-01-21 19:35:34 +00002146 This driver supports adapters based on the original Yukon chipset:
2147 Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
2148 Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
2149
2150 It does not support the newer Yukon2 chipset: a separate driver,
2151 sky2, is provided for Yukon2-based adapters.
2152
2153 To compile this driver as a module, choose M here: the module
2154 will be called skge. This is recommended.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002155
Stephen Hemminger678aa1f2007-10-16 12:15:54 -07002156config SKGE_DEBUG
2157 bool "Debugging interface"
2158 depends on SKGE && DEBUG_FS
2159 help
2160 This option adds the ability to dump driver state for debugging.
2161 The file debugfs/skge/ethX displays the state of the internal
2162 transmit and receive rings.
2163
2164 If unsure, say N.
2165
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002166config SKY2
Stephen Hemminger8a3e3bf2007-07-09 15:33:38 -07002167 tristate "SysKonnect Yukon2 support"
Stephen Hemmingerf479b322006-10-27 10:22:10 -07002168 depends on PCI
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002169 select CRC32
2170 ---help---
Matt LaPlantecab00892006-10-03 22:36:44 +02002171 This driver supports Gigabit Ethernet adapters based on the
Daniel Drakec6f0d752006-01-21 19:35:34 +00002172 Marvell Yukon 2 chipset:
2173 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
2174 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
2175
Stephen Hemmingerf479b322006-10-27 10:22:10 -07002176 There is companion driver for the older Marvell Yukon and
2177 Genesis based adapters: skge.
Stephen Hemmingercd28ab62005-08-16 16:36:49 -07002178
2179 To compile this driver as a module, choose M here: the module
2180 will be called sky2. This is recommended.
2181
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002182config SKY2_DEBUG
2183 bool "Debugging interface"
2184 depends on SKY2 && DEBUG_FS
2185 help
2186 This option adds the ability to dump driver state for debugging.
2187 The file debugfs/sky2/ethX displays the state of the internal
2188 transmit and receive rings.
Daniel Drakec6f0d752006-01-21 19:35:34 +00002189
Stephen Hemminger3cf26752007-07-09 15:33:35 -07002190 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002191
2192config VIA_VELOCITY
2193 tristate "VIA Velocity support"
Yoichi Yuasa73815532007-05-24 16:12:27 +09002194 depends on PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07002195 select CRC32
2196 select CRC_CCITT
2197 select MII
2198 help
2199 If you have a VIA "Velocity" based network card say Y here.
2200
2201 To compile this driver as a module, choose M here. The module
2202 will be called via-velocity.
2203
2204config TIGON3
2205 tristate "Broadcom Tigon3 support"
2206 depends on PCI
Matt Carlson158d7ab2008-05-29 01:37:54 -07002207 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07002208 help
2209 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
2210
2211 To compile this driver as a module, choose M here: the module
2212 will be called tg3. This is recommended.
2213
Michael Chanb6016b72005-05-26 13:03:09 -07002214config BNX2
2215 tristate "Broadcom NetXtremeII support"
2216 depends on PCI
Michael Chanfba9fe92006-06-12 22:21:25 -07002217 select CRC32
2218 select ZLIB_INFLATE
Michael Chanb6016b72005-05-26 13:03:09 -07002219 help
2220 This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
2221
2222 To compile this driver as a module, choose M here: the module
2223 will be called bnx2. This is recommended.
2224
Jens Osterkampaaec0fa2005-09-05 15:19:29 -07002225config SPIDER_NET
2226 tristate "Spider Gigabit Ethernet driver"
Kou Ishizaki3342cf0e2007-02-20 16:36:14 -06002227 depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
Christoph Hellwig9b158792006-03-15 11:30:44 +01002228 select FW_LOADER
Jens Osterkampaaec0fa2005-09-05 15:19:29 -07002229 help
2230 This driver supports the Gigabit Ethernet chips present on the
2231 Cell Processor-Based Blades from IBM.
2232
Zang Roy-r619115e123b82006-11-08 19:49:13 -08002233config TSI108_ETH
2234 tristate "Tundra TSI108 gigabit Ethernet support"
2235 depends on TSI108_BRIDGE
2236 help
2237 This driver supports Tundra TSI108 gigabit Ethernet ports.
2238 To compile this driver as a module, choose M here: the module
2239 will be called tsi108_eth.
2240
Masakazu Mokuno02c18892007-07-05 20:11:16 +09002241config GELIC_NET
2242 tristate "PS3 Gigabit Ethernet driver"
2243 depends on PPC_PS3
Geoff Levand1d32e212008-04-10 07:01:53 +10002244 select PS3_SYS_MANAGER
Masakazu Mokuno02c18892007-07-05 20:11:16 +09002245 help
2246 This driver supports the network device on the PS3 game
2247 console. This driver has built-in support for Ethernet.
2248
2249 To compile this driver as a module, choose M here: the
2250 module will be called ps3_gelic.
2251
Masakazu Mokuno09dde542008-02-07 19:58:57 +09002252config GELIC_WIRELESS
John W. Linville97ed8392008-03-06 13:08:09 -05002253 bool "PS3 Wireless support"
2254 depends on GELIC_NET
2255 select WIRELESS_EXT
2256 help
2257 This option adds the support for the wireless feature of PS3.
2258 If you have the wireless-less model of PS3 or have no plan to
2259 use wireless feature, disabling this option saves memory. As
2260 the driver automatically distinguishes the models, you can
2261 safely enable this option even if you have a wireless-less model.
Masakazu Mokuno09dde542008-02-07 19:58:57 +09002262
Masakazu Mokunof409e342008-05-30 16:52:55 +09002263config GELIC_WIRELESS_OLD_PSK_INTERFACE
2264 bool "PS3 Wireless private PSK interface (OBSOLETE)"
2265 depends on GELIC_WIRELESS
2266 help
2267 This option retains the obsolete private interface to pass
2268 the PSK from user space programs to the driver. The PSK
2269 stands for 'Pre Shared Key' and is used for WPA[2]-PSK
2270 (WPA-Personal) environment.
2271 If WPA[2]-PSK is used and you need to use old programs that
2272 support only this old interface, say Y. Otherwise N.
2273
2274 If unsure, say N.
2275
Linus Torvalds1da177e2005-04-16 15:20:36 -07002276config GIANFAR
2277 tristate "Gianfar Ethernet"
Kumar Gala3a831562008-01-28 10:24:30 -06002278 depends on FSL_SOC
Andy Flemingbb40dcb2005-09-23 22:54:21 -04002279 select PHYLIB
Dave Jiangbf41a7c2007-04-12 10:57:06 -07002280 select CRC32
Linus Torvalds1da177e2005-04-16 15:20:36 -07002281 help
Jon Loeligeref82a3062006-06-17 17:52:55 -05002282 This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx,
2283 and MPC86xx family of chips, and the FEC on the 8540.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002284
Li Yangce973b12006-08-14 23:00:11 -07002285config UCC_GETH
Timur Tabi7d776cb2007-03-12 15:40:27 -05002286 tristate "Freescale QE Gigabit Ethernet"
2287 depends on QUICC_ENGINE
Jan Altenberg296baae2007-06-01 00:46:29 -07002288 select PHYLIB
Li Yangce973b12006-08-14 23:00:11 -07002289 help
Timur Tabi7d776cb2007-03-12 15:40:27 -05002290 This driver supports the Gigabit Ethernet mode of the QUICC Engine,
2291 which is available on some Freescale SOCs.
Li Yangce973b12006-08-14 23:00:11 -07002292
Li Yangce973b12006-08-14 23:00:11 -07002293config UGETH_MAGIC_PACKET
2294 bool "Magic Packet detection support"
2295 depends on UCC_GETH
2296
Michael Reissd5b90492007-04-13 01:26:19 -05002297config UGETH_TX_ON_DEMAND
2298 bool "Transmit on Demand support"
Li Yangce973b12006-08-14 23:00:11 -07002299 depends on UCC_GETH
2300
Linus Torvalds1da177e2005-04-16 15:20:36 -07002301config MV643XX_ETH
Lennert Buytenhek9c1bbdf2007-10-19 04:11:03 +02002302 tristate "Marvell Discovery (643XX) and Orion ethernet support"
Lennert Buytenhek83aac8a2008-03-27 14:51:40 -04002303 depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION
Lennert Buytenheked944932008-08-26 13:34:19 +02002304 select PHYLIB
Linus Torvalds1da177e2005-04-16 15:20:36 -07002305 help
Lennert Buytenhek9c1bbdf2007-10-19 04:11:03 +02002306 This driver supports the gigabit ethernet MACs in the
2307 Marvell Discovery PPC/MIPS chipset family (MV643XX) and
2308 in the Marvell Orion ARM SoC family.
2309
2310 Some boards that use the Discovery chipset are the Momenco
2311 Ocelot C and Jaguar ATX and Pegasos II.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002312
Ron Mercer5a4faa872006-07-25 00:40:21 -07002313config QLA3XXX
2314 tristate "QLogic QLA3XXX Network Driver Support"
2315 depends on PCI
2316 help
2317 This driver supports QLogic ISP3XXX gigabit Ethernet cards.
2318
2319 To compile this driver as a module, choose M here: the module
2320 will be called qla3xxx.
2321
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002322config ATL1
Jay Cliburna6d1f362008-09-27 04:17:22 +00002323 tristate "Atheros/Attansic L1 Gigabit Ethernet support"
2324 depends on PCI
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002325 select CRC32
2326 select MII
2327 help
Jay Cliburna6d1f362008-09-27 04:17:22 +00002328 This driver supports the Atheros/Attansic L1 gigabit ethernet
2329 adapter.
Jay Cliburnf3cc28c2007-02-08 10:42:37 -05002330
2331 To compile this driver as a module, choose M here. The module
2332 will be called atl1.
2333
Jie Yanga6a53252008-07-18 11:37:13 +08002334config ATL1E
2335 tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
2336 depends on PCI && EXPERIMENTAL
2337 select CRC32
2338 select MII
2339 help
2340 This driver supports the Atheros L1E gigabit ethernet adapter.
2341
2342 To compile this driver as a module, choose M here. The module
2343 will be called atl1e.
2344
Guo-Fu Tseng95252232008-09-16 01:00:11 +08002345config JME
2346 tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
2347 depends on PCI
2348 select CRC32
2349 select MII
2350 ---help---
2351 This driver supports the PCI-Express gigabit ethernet adapters
2352 based on JMicron JMC250 chipset.
2353
2354 To compile this driver as a module, choose M here. The module
2355 will be called jme.
2356
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002357endif # NETDEV_1000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002358
2359#
2360# 10 Gigabit Ethernet
2361#
2362
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002363menuconfig NETDEV_10000
2364 bool "Ethernet (10000 Mbit)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002365 depends on !UML
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002366 default y
Jan Engelhardt06bfb7e2007-08-18 12:56:21 +02002367 ---help---
2368 Say Y here to get to see options for 10 Gigabit Ethernet drivers.
2369 This option alone does not add any kernel code.
2370
2371 If you say N, all options in this submenu will be skipped and disabled.
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002372
2373if NETDEV_10000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002374
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002375config CHELSIO_T1
2376 tristate "Chelsio 10Gb Ethernet support"
2377 depends on PCI
Stephen Hemminger57834ca2006-12-01 16:36:19 -08002378 select CRC32
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002379 help
Stephen Hemmingerf1d3d382006-12-01 16:36:16 -08002380 This driver supports Chelsio gigabit and 10-gigabit
2381 Ethernet cards. More information about adapter features and
2382 performance tuning is in <file:Documentation/networking/cxgb.txt>.
Christoph Lameter8199d3a2005-03-30 13:34:31 -08002383
2384 For general information about Chelsio and our products, visit
2385 our website at <http://www.chelsio.com>.
2386
2387 For customer support, please visit our customer support page at
2388 <http://www.chelsio.com/support.htm>.
2389
2390 Please send feedback to <linux-bugs@chelsio.com>.
2391
2392 To compile this driver as a module, choose M here: the module
2393 will be called cxgb.
2394
Stephen Hemminger352c4172006-12-01 16:36:17 -08002395config CHELSIO_T1_1G
2396 bool "Chelsio gigabit Ethernet support"
2397 depends on CHELSIO_T1
2398 help
2399 Enables support for Chelsio's gigabit Ethernet PCI cards. If you
2400 are using only 10G cards say 'N' here.
2401
James Bottomley58daa682008-12-30 10:20:24 -06002402config CHELSIO_T3_DEPENDS
2403 tristate
2404 depends on PCI && INET
2405 default y
2406
Divy Le Ray4d22de32007-01-18 22:04:14 -05002407config CHELSIO_T3
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002408 tristate "Chelsio Communications T3 10Gb Ethernet support"
James Bottomley58daa682008-12-30 10:20:24 -06002409 depends on CHELSIO_T3_DEPENDS
Divy Le Ray2e283962007-03-18 13:10:06 -07002410 select FW_LOADER
Divy Le Rayb47385b2008-05-21 18:56:26 -07002411 select INET_LRO
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002412 help
2413 This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
2414 adapters.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002415
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002416 For general information about Chelsio and our products, visit
2417 our website at <http://www.chelsio.com>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002418
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002419 For customer support, please visit our customer support page at
2420 <http://www.chelsio.com/support.htm>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002421
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002422 Please send feedback to <linux-bugs@chelsio.com>.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002423
Divy Le Ray194c1fb2007-03-21 19:21:00 -07002424 To compile this driver as a module, choose M here: the module
2425 will be called cxgb3.
Divy Le Ray4d22de32007-01-18 22:04:14 -05002426
Jan-Bernd Themann7a291082006-09-13 17:44:31 +02002427config EHEA
2428 tristate "eHEA Ethernet support"
Nathan Lynch60d50192008-06-04 08:31:28 +10002429 depends on IBMEBUS && INET && SPARSEMEM
Jan-Bernd Themannd4dc4ec2007-09-25 16:16:34 -07002430 select INET_LRO
Jan-Bernd Themann7a291082006-09-13 17:44:31 +02002431 ---help---
2432 This driver supports the IBM pSeries eHEA ethernet adapter.
2433
2434 To compile the driver as a module, choose M here. The module
2435 will be called ehea.
2436
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002437config ENIC
Roland Dreiereb8a4cb2008-10-13 18:53:05 -07002438 tristate "Cisco 10G Ethernet NIC support"
Scott Feldman01f2e4e2008-09-15 09:17:11 -07002439 depends on PCI && INET
2440 select INET_LRO
2441 help
2442 This enables the support for the Cisco 10G Ethernet card.
2443
Auke Kok9a799d72007-09-15 14:07:45 -07002444config IXGBE
2445 tristate "Intel(R) 10GbE PCI Express adapters support"
Mallikarjuna R Chilakala177db6f2008-06-18 15:32:19 -07002446 depends on PCI && INET
2447 select INET_LRO
Auke Kok9a799d72007-09-15 14:07:45 -07002448 ---help---
2449 This driver supports Intel(R) 10GbE PCI Express family of
2450 adapters. For more information on how to identify your adapter, go
2451 to the Adapter & Driver ID Guide at:
2452
2453 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2454
2455 For general information and support, go to the Intel support
2456 website at:
2457
2458 <http://support.intel.com>
2459
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002460 To compile this driver as a module, choose M here. The module
Auke Kok9a799d72007-09-15 14:07:45 -07002461 will be called ixgbe.
2462
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002463config IXGBE_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002464 bool "Direct Cache Access (DCA) Support"
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002465 default y
2466 depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002467 ---help---
2468 Say Y here if you want to use Direct Cache Access (DCA) in the
2469 driver. DCA is a method for warming the CPU cache before data
2470 is used, with the intent of lessening the impact of cache misses.
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002471
Jeff Kirsher7a6b6f52008-11-25 01:02:08 -08002472config IXGBE_DCB
Alexander Duyck2f90b862008-11-20 20:52:10 -08002473 bool "Data Center Bridging (DCB) Support"
2474 default n
Jeff Kirsher7a6b6f52008-11-25 01:02:08 -08002475 depends on IXGBE && DCB
Alexander Duyck2f90b862008-11-20 20:52:10 -08002476 ---help---
2477 Say Y here if you want to use Data Center Bridging (DCB) in the
2478 driver.
2479
2480 If unsure, say N.
2481
Linus Torvalds1da177e2005-04-16 15:20:36 -07002482config IXGB
2483 tristate "Intel(R) PRO/10GbE support"
2484 depends on PCI
2485 ---help---
Auke Kok9a799d72007-09-15 14:07:45 -07002486 This driver supports Intel(R) PRO/10GbE family of adapters for
2487 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
2488 instead. For more information on how to identify your adapter, go
Linus Torvalds1da177e2005-04-16 15:20:36 -07002489 to the Adapter & Driver ID Guide at:
2490
2491 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
2492
2493 For general information and support, go to the Intel support
2494 website at:
2495
2496 <http://support.intel.com>
2497
2498 More specific information on configuring the driver is in
2499 <file:Documentation/networking/ixgb.txt>.
2500
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002501 To compile this driver as a module, choose M here. The module
Linus Torvalds1da177e2005-04-16 15:20:36 -07002502 will be called ixgb.
2503
Linus Torvalds1da177e2005-04-16 15:20:36 -07002504config S2IO
2505 tristate "S2IO 10Gbe XFrame NIC"
2506 depends on PCI
2507 ---help---
2508 This driver supports the 10Gbe XFrame NIC of S2IO.
Akinobu Mita9eb343a2005-10-21 19:06:42 +09002509 More specific information on configuring the driver is in
2510 <file:Documentation/networking/s2io.txt>.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002511
Brice Goglin0da34b62006-05-23 06:10:15 -04002512config MYRI10GE
2513 tristate "Myricom Myri-10G Ethernet support"
Randy Dunlape0d5dab2007-10-18 21:53:50 -07002514 depends on PCI && INET
Brice Goglin0da34b62006-05-23 06:10:15 -04002515 select FW_LOADER
2516 select CRC32
Andrew Gallatin1e6e9342007-09-17 11:37:42 -07002517 select INET_LRO
Brice Goglin0da34b62006-05-23 06:10:15 -04002518 ---help---
2519 This driver supports Myricom Myri-10G Dual Protocol interface in
2520 Ethernet mode. If the eeprom on your board is not recent enough,
2521 you will need a newer firmware image.
2522 You may get this image or more information, at:
2523
Brice Goglind2794902006-09-05 21:58:50 -04002524 <http://www.myri.com/scs/download-Myri10GE.html>
Brice Goglin0da34b62006-05-23 06:10:15 -04002525
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002526 To compile this driver as a module, choose M here. The module
Brice Goglin0da34b62006-05-23 06:10:15 -04002527 will be called myri10ge.
2528
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002529config MYRI10GE_DCA
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002530 bool "Direct Cache Access (DCA) Support"
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002531 default y
2532 depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
Jeff Kirsher1d19ecf2008-11-02 20:30:33 -08002533 ---help---
2534 Say Y here if you want to use Direct Cache Access (DCA) in the
2535 driver. DCA is a method for warming the CPU cache before data
2536 is used, with the intent of lessening the impact of cache misses.
Jeff Garzik5dd2d332008-10-16 05:09:31 -04002537
Amit S. Kale3d396eb2006-10-21 15:33:03 -04002538config NETXEN_NIC
2539 tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
Randy Dunlap5ac36612006-11-16 21:39:11 -08002540 depends on PCI
Amit S. Kale3d396eb2006-10-21 15:33:03 -04002541 help
2542 This enables the support for NetXen's Gigabit Ethernet card.
2543
David S. Millera3138df2007-10-09 01:54:01 -07002544config NIU
2545 tristate "Sun Neptune 10Gbit Ethernet support"
2546 depends on PCI
2547 help
2548 This enables support for cards based upon Sun's
2549 Neptune chipset.
2550
Olof Johanssonf5cd7872007-01-31 21:43:54 -06002551config PASEMI_MAC
2552 tristate "PA Semi 1/10Gbit MAC"
Michael Ellerman5beaf7d2008-03-28 12:17:33 +11002553 depends on PPC_PASEMI && PCI
Olof Johanssonbb6e9592007-05-08 00:47:54 -05002554 select PHYLIB
Olof Johansson28ae79f2007-11-28 20:57:27 -06002555 select INET_LRO
Olof Johanssonf5cd7872007-01-31 21:43:54 -06002556 help
2557 This driver supports the on-chip 1/10Gbit Ethernet controller on
2558 PA Semi's PWRficient line of chips.
2559
Yevgeny Petrilinc27a02c2008-10-22 15:47:49 -07002560config MLX4_EN
2561 tristate "Mellanox Technologies 10Gbit Ethernet support"
2562 depends on PCI && INET
2563 select MLX4_CORE
2564 select INET_LRO
2565 help
2566 This driver supports Mellanox Technologies ConnectX Ethernet
2567 devices.
2568
Roland Dreier225c7b12007-05-08 18:00:38 -07002569config MLX4_CORE
2570 tristate
2571 depends on PCI
2572 default n
2573
2574config MLX4_DEBUG
2575 bool "Verbose debugging output" if (MLX4_CORE && EMBEDDED)
Paul Mundtf550d942007-05-10 12:50:28 +09002576 depends on MLX4_CORE
Roland Dreier225c7b12007-05-08 18:00:38 -07002577 default y
2578 ---help---
2579 This option causes debugging code to be compiled into the
2580 mlx4_core driver. The output can be turned on via the
2581 debug_level module parameter (which can also be set after
2582 the driver is loaded through sysfs).
2583
Andy Gospodarek1a348cc2007-09-17 18:50:36 -07002584config TEHUTI
2585 tristate "Tehuti Networks 10G Ethernet"
2586 depends on PCI
2587 help
2588 Tehuti Networks 10G Ethernet NIC
2589
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002590config BNX2X
2591 tristate "Broadcom NetXtremeII 10Gb support"
2592 depends on PCI
Lee Schermerhorn07b270e2007-12-13 16:02:59 -08002593 select ZLIB_INFLATE
Eilon Greenstein34f80b02008-06-23 20:33:01 -07002594 select LIBCRC32C
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002595 help
2596 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
2597 To compile this driver as a module, choose M here: the module
2598 will be called bnx2x. This is recommended.
2599
Ron Mercerc4e84bd2008-09-18 11:56:28 -04002600config QLGE
2601 tristate "QLogic QLGE 10Gb Ethernet Driver Support"
2602 depends on PCI
2603 help
2604 This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
2605
2606 To compile this driver as a module, choose M here: the module
2607 will be called qlge.
2608
Ben Hutchings8ceee662008-04-27 12:55:59 +01002609source "drivers/net/sfc/Kconfig"
Eliezer Tamira2fbb9e2007-11-15 20:09:02 +02002610
Jan Engelhardtf30486d2007-05-10 22:52:56 -07002611endif # NETDEV_10000
Linus Torvalds1da177e2005-04-16 15:20:36 -07002612
Linus Torvalds1da177e2005-04-16 15:20:36 -07002613source "drivers/net/tokenring/Kconfig"
2614
2615source "drivers/net/wireless/Kconfig"
2616
Inaky Perez-Gonzalez143ee2d2008-12-23 16:18:48 -08002617source "drivers/net/wimax/Kconfig"
2618
Jeff Garzik5b2fc492007-05-09 21:31:55 -04002619source "drivers/net/usb/Kconfig"
2620
Linus Torvalds1da177e2005-04-16 15:20:36 -07002621source "drivers/net/pcmcia/Kconfig"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002622
2623source "drivers/net/wan/Kconfig"
2624
2625source "drivers/atm/Kconfig"
2626
2627source "drivers/s390/net/Kconfig"
2628
Jeremy Fitzhardinge0d160212007-07-17 18:37:06 -07002629config XEN_NETDEV_FRONTEND
2630 tristate "Xen network device frontend driver"
2631 depends on XEN
2632 default y
2633 help
2634 The network device frontend driver allows the kernel to
2635 access network devices exported exported by a virtual
2636 machine containing a physical network device driver. The
2637 frontend driver is intended for unprivileged guest domains;
2638 if you are compiling a kernel for a Xen guest, you almost
2639 certainly want to enable this.
2640
Linus Torvalds1da177e2005-04-16 15:20:36 -07002641config ISERIES_VETH
2642 tristate "iSeries Virtual Ethernet driver support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002643 depends on PPC_ISERIES
Linus Torvalds1da177e2005-04-16 15:20:36 -07002644
Matt Porterf89efd52005-09-09 12:10:10 -07002645config RIONET
2646 tristate "RapidIO Ethernet over messaging driver support"
Randy Dunlapa81c52a2006-11-01 21:18:58 -08002647 depends on RAPIDIO
Matt Porterf89efd52005-09-09 12:10:10 -07002648
2649config RIONET_TX_SIZE
2650 int "Number of outbound queue entries"
2651 depends on RIONET
2652 default "128"
2653
2654config RIONET_RX_SIZE
2655 int "Number of inbound queue entries"
2656 depends on RIONET
2657 default "128"
2658
Linus Torvalds1da177e2005-04-16 15:20:36 -07002659config FDDI
Dave Joneseb560922008-12-27 20:43:48 -08002660 tristate "FDDI driver support"
Maciej W. Rozyckie89a2cf2007-02-05 16:28:27 -08002661 depends on (PCI || EISA || TC)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002662 help
2663 Fiber Distributed Data Interface is a high speed local area network
2664 design; essentially a replacement for high speed Ethernet. FDDI can
2665 run over copper or fiber. If you are connected to such a network and
2666 want a driver for the FDDI card in your computer, say Y here (and
2667 then also Y to the driver for your FDDI card, below). Most people
2668 will say N.
2669
2670config DEFXX
Maciej W. Rozyckie89a2cf2007-02-05 16:28:27 -08002671 tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
2672 depends on FDDI && (PCI || EISA || TC)
2673 ---help---
2674 This is support for the DIGITAL series of TURBOchannel (DEFTA),
2675 EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
2676 to a local FDDI network.
2677
2678 To compile this driver as a module, choose M here: the module
2679 will be called defxx. If unsure, say N.
2680
2681config DEFXX_MMIO
2682 bool
2683 prompt "Use MMIO instead of PIO" if PCI || EISA
2684 depends on DEFXX
2685 default n if PCI || EISA
2686 default y
2687 ---help---
2688 This instructs the driver to use EISA or PCI memory-mapped I/O
2689 (MMIO) as appropriate instead of programmed I/O ports (PIO).
2690 Enabling this gives an improvement in processing time in parts
2691 of the driver, but it may cause problems with EISA (DEFEA)
2692 adapters. TURBOchannel does not have the concept of I/O ports,
2693 so MMIO is always used for these (DEFTA) adapters.
2694
2695 If unsure, say N.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002696
2697config SKFP
2698 tristate "SysKonnect FDDI PCI support"
2699 depends on FDDI && PCI
Akinobu Mitabc63eb92006-12-19 13:09:08 -08002700 select BITREVERSE
Linus Torvalds1da177e2005-04-16 15:20:36 -07002701 ---help---
2702 Say Y here if you have a SysKonnect FDDI PCI adapter.
2703 The following adapters are supported by this driver:
2704 - SK-5521 (SK-NET FDDI-UP)
2705 - SK-5522 (SK-NET FDDI-UP DAS)
2706 - SK-5541 (SK-NET FDDI-FP)
2707 - SK-5543 (SK-NET FDDI-LP)
2708 - SK-5544 (SK-NET FDDI-LP DAS)
2709 - SK-5821 (SK-NET FDDI-UP64)
2710 - SK-5822 (SK-NET FDDI-UP64 DAS)
2711 - SK-5841 (SK-NET FDDI-FP64)
2712 - SK-5843 (SK-NET FDDI-LP64)
2713 - SK-5844 (SK-NET FDDI-LP64 DAS)
2714 - Netelligent 100 FDDI DAS Fibre SC
2715 - Netelligent 100 FDDI SAS Fibre SC
2716 - Netelligent 100 FDDI DAS UTP
2717 - Netelligent 100 FDDI SAS UTP
2718 - Netelligent 100 FDDI SAS Fibre MIC
2719
2720 Read <file:Documentation/networking/skfp.txt> for information about
2721 the driver.
2722
2723 Questions concerning this driver can be addressed to:
2724 <linux@syskonnect.de>
2725
2726 To compile this driver as a module, choose M here: the module
2727 will be called skfp. This is recommended.
2728
2729config HIPPI
2730 bool "HIPPI driver support (EXPERIMENTAL)"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002731 depends on EXPERIMENTAL && INET && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07002732 help
2733 HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
2734 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
2735 can run over copper (25m) or fiber (300m on multi-mode or 10km on
2736 single-mode). HIPPI networks are commonly used for clusters and to
2737 connect to super computers. If you are connected to a HIPPI network
2738 and have a HIPPI network card in your computer that you want to use
2739 under Linux, say Y here (you must also remember to enable the driver
2740 for your HIPPI card below). Most people will say N here.
2741
2742config ROADRUNNER
2743 tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
2744 depends on HIPPI && PCI
2745 help
2746 Say Y here if this is your PCI HIPPI network card.
2747
2748 To compile this driver as a module, choose M here: the module
2749 will be called rrunner. If unsure, say N.
2750
2751config ROADRUNNER_LARGE_RINGS
2752 bool "Use large TX/RX rings (EXPERIMENTAL)"
2753 depends on ROADRUNNER
2754 help
2755 If you say Y here, the RoadRunner driver will preallocate up to 2 MB
2756 of additional memory to allow for fastest operation, both for
2757 transmitting and receiving. This memory cannot be used by any other
2758 kernel code or by user space programs. Say Y here only if you have
2759 the memory.
2760
2761config PLIP
2762 tristate "PLIP (parallel port) support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07002763 depends on PARPORT
Linus Torvalds1da177e2005-04-16 15:20:36 -07002764 ---help---
2765 PLIP (Parallel Line Internet Protocol) is used to create a
2766 reasonably fast mini network consisting of two (or, rarely, more)
2767 local machines. A PLIP link from a Linux box is a popular means to
2768 install a Linux distribution on a machine which doesn't have a
2769 CD-ROM drive (a minimal system has to be transferred with floppies
2770 first). The kernels on both machines need to have this PLIP option
2771 enabled for this to work.
2772
2773 The PLIP driver has two modes, mode 0 and mode 1. The parallel
2774 ports (the connectors at the computers with 25 holes) are connected
2775 with "null printer" or "Turbo Laplink" cables which can transmit 4
2776 bits at a time (mode 0) or with special PLIP cables, to be used on
2777 bidirectional parallel ports only, which can transmit 8 bits at a
2778 time (mode 1); you can find the wiring of these cables in
2779 <file:Documentation/networking/PLIP.txt>. The cables can be up to
2780 15m long. Mode 0 works also if one of the machines runs DOS/Windows
2781 and has some PLIP software installed, e.g. the Crynwr PLIP packet
2782 driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
2783 and winsock or NCSA's telnet.
2784
2785 If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
2786 as the NET-3-HOWTO, both available from
2787 <http://www.tldp.org/docs.html#howto>. Note that the PLIP
2788 protocol has been changed and this PLIP driver won't work together
2789 with the PLIP support in Linux versions 1.0.x. This option enlarges
2790 your kernel by about 8 KB.
2791
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002792 To compile this driver as a module, choose M here. The module
2793 will be called plip. If unsure, say Y or M, in case you buy
2794 a laptop later.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002795
2796config PPP
2797 tristate "PPP (point-to-point protocol) support"
Ralf Baechleb6e37e52006-07-14 12:15:40 +01002798 select SLHC
Linus Torvalds1da177e2005-04-16 15:20:36 -07002799 ---help---
2800 PPP (Point to Point Protocol) is a newer and better SLIP. It serves
2801 the same purpose: sending Internet traffic over telephone (and other
2802 serial) lines. Ask your access provider if they support it, because
2803 otherwise you can't use it; most Internet access providers these
2804 days support PPP rather than SLIP.
2805
2806 To use PPP, you need an additional program called pppd as described
2807 in the PPP-HOWTO, available at
2808 <http://www.tldp.org/docs.html#howto>. Make sure that you have
2809 the version of pppd recommended in <file:Documentation/Changes>.
2810 The PPP option enlarges your kernel by about 16 KB.
2811
2812 There are actually two versions of PPP: the traditional PPP for
2813 asynchronous lines, such as regular analog phone lines, and
2814 synchronous PPP which can be used over digital ISDN lines for
2815 example. If you want to use PPP over phone lines or other
2816 asynchronous serial lines, you need to say Y (or M) here and also to
2817 the next option, "PPP support for async serial ports". For PPP over
2818 synchronous lines, you should say Y (or M) here and to "Support
2819 synchronous PPP", below.
2820
2821 If you said Y to "Version information on all symbols" above, then
2822 you cannot compile the PPP driver into the kernel; you can then only
2823 compile it as a module. To compile this driver as a module, choose M
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002824 here. The module will be called ppp_generic.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002825
2826config PPP_MULTILINK
2827 bool "PPP multilink support (EXPERIMENTAL)"
2828 depends on PPP && EXPERIMENTAL
2829 help
2830 PPP multilink is a protocol (defined in RFC 1990) which allows you
2831 to combine several (logical or physical) lines into one logical PPP
2832 connection, so that you can utilize your full bandwidth.
2833
2834 This has to be supported at the other end as well and you need a
2835 version of the pppd daemon which understands the multilink protocol.
2836
2837 If unsure, say N.
2838
2839config PPP_FILTER
2840 bool "PPP filtering"
2841 depends on PPP
2842 help
2843 Say Y here if you want to be able to filter the packets passing over
2844 PPP interfaces. This allows you to control which packets count as
2845 activity (i.e. which packets will reset the idle timer or bring up
Jon Mason47c51432006-02-12 11:53:04 -06002846 a demand-dialed link) and which packets are to be dropped entirely.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002847 You need to say Y here if you wish to use the pass-filter and
2848 active-filter options to pppd.
2849
2850 If unsure, say N.
2851
2852config PPP_ASYNC
2853 tristate "PPP support for async serial ports"
2854 depends on PPP
2855 select CRC_CCITT
2856 ---help---
2857 Say Y (or M) here if you want to be able to use PPP over standard
2858 asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
2859 a modem (not a synchronous or ISDN modem) to contact your ISP, you
2860 need this option.
2861
2862 To compile this driver as a module, choose M here.
2863
2864 If unsure, say Y.
2865
2866config PPP_SYNC_TTY
2867 tristate "PPP support for sync tty ports"
2868 depends on PPP
2869 help
2870 Say Y (or M) here if you want to be able to use PPP over synchronous
2871 (HDLC) tty devices, such as the SyncLink adapter. These devices
2872 are often used for high-speed leased lines like T1/E1.
2873
2874 To compile this driver as a module, choose M here.
2875
2876config PPP_DEFLATE
2877 tristate "PPP Deflate compression"
2878 depends on PPP
2879 select ZLIB_INFLATE
2880 select ZLIB_DEFLATE
2881 ---help---
2882 Support for the Deflate compression method for PPP, which uses the
2883 Deflate algorithm (the same algorithm that gzip uses) to compress
2884 each PPP packet before it is sent over the wire. The machine at the
2885 other end of the PPP link (usually your ISP) has to support the
2886 Deflate compression method as well for this to be useful. Even if
2887 they don't support it, it is safe to say Y here.
2888
2889 To compile this driver as a module, choose M here.
2890
2891config PPP_BSDCOMP
2892 tristate "PPP BSD-Compress compression"
2893 depends on PPP
2894 ---help---
2895 Support for the BSD-Compress compression method for PPP, which uses
2896 the LZW compression method to compress each PPP packet before it is
2897 sent over the wire. The machine at the other end of the PPP link
2898 (usually your ISP) has to support the BSD-Compress compression
2899 method as well for this to be useful. Even if they don't support it,
2900 it is safe to say Y here.
2901
2902 The PPP Deflate compression method ("PPP Deflate compression",
2903 above) is preferable to BSD-Compress, because it compresses better
2904 and is patent-free.
2905
2906 Note that the BSD compression code will always be compiled as a
2907 module; it is called bsd_comp and will show up in the directory
2908 modules once you have said "make modules". If unsure, say N.
2909
Matt Domschb3f9b922005-11-08 09:40:47 -08002910config PPP_MPPE
2911 tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
2912 depends on PPP && EXPERIMENTAL
2913 select CRYPTO
2914 select CRYPTO_SHA1
2915 select CRYPTO_ARC4
Patrick McHardybcbaecb2006-10-25 16:49:36 +10002916 select CRYPTO_ECB
Matt Domschb3f9b922005-11-08 09:40:47 -08002917 ---help---
2918 Support for the MPPE Encryption protocol, as employed by the
2919 Microsoft Point-to-Point Tunneling Protocol.
2920
2921 See http://pptpclient.sourceforge.net/ for information on
2922 configuring PPTP clients and servers to utilize this method.
2923
Linus Torvalds1da177e2005-04-16 15:20:36 -07002924config PPPOE
2925 tristate "PPP over Ethernet (EXPERIMENTAL)"
2926 depends on EXPERIMENTAL && PPP
2927 help
2928 Support for PPP over Ethernet.
2929
2930 This driver requires the latest version of pppd from the CVS
2931 repository at cvs.samba.org. Alternatively, see the
2932 RoaringPenguin package (<http://www.roaringpenguin.com/pppoe>)
2933 which contains instruction on how to use this driver (under
2934 the heading "Kernel mode PPPoE").
2935
2936config PPPOATM
2937 tristate "PPP over ATM"
2938 depends on ATM && PPP
2939 help
2940 Support PPP (Point to Point Protocol) encapsulated in ATM frames.
2941 This implementation does not yet comply with section 8 of RFC2364,
2942 which can lead to bad results if the ATM peer loses state and
2943 changes its encapsulation unilaterally.
2944
James Chapman3557baa2007-06-27 15:49:24 -07002945config PPPOL2TP
2946 tristate "PPP over L2TP (EXPERIMENTAL)"
James Chapman143cf352007-07-30 18:51:48 -07002947 depends on EXPERIMENTAL && PPP && INET
James Chapman3557baa2007-06-27 15:49:24 -07002948 help
2949 Support for PPP-over-L2TP socket family. L2TP is a protocol
2950 used by ISPs and enterprises to tunnel PPP traffic over UDP
2951 tunnels. L2TP is replacing PPTP for VPN uses.
2952
2953 This kernel component handles only L2TP data packets: a
2954 userland daemon handles L2TP the control protocol (tunnel
2955 and session setup). One such daemon is OpenL2TP
2956 (http://openl2tp.sourceforge.net/).
2957
Linus Torvalds1da177e2005-04-16 15:20:36 -07002958config SLIP
2959 tristate "SLIP (serial line) support"
Linus Torvalds1da177e2005-04-16 15:20:36 -07002960 ---help---
2961 Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
2962 connect to your Internet service provider or to connect to some
2963 other local Unix box or if you want to configure your Linux box as a
2964 Slip/CSlip server for other people to dial in. SLIP (Serial Line
2965 Internet Protocol) is a protocol used to send Internet traffic over
2966 serial connections such as telephone lines or null modem cables;
2967 nowadays, the protocol PPP is more commonly used for this same
2968 purpose.
2969
2970 Normally, your access provider has to support SLIP in order for you
2971 to be able to use it, but there is now a SLIP emulator called SLiRP
2972 around (available from
2973 <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
2974 allows you to use SLIP over a regular dial up shell connection. If
2975 you plan to use SLiRP, make sure to say Y to CSLIP, below. The
2976 NET-3-HOWTO, available from
2977 <http://www.tldp.org/docs.html#howto>, explains how to
2978 configure SLIP. Note that you don't need this option if you just
2979 want to run term (term is a program which gives you almost full
2980 Internet connectivity if you have a regular dial up shell account on
2981 some Internet connected Unix computer. Read
2982 <http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
2983 support will enlarge your kernel by about 4 KB. If unsure, say N.
2984
Adrian Bunk57ce45d2007-11-12 21:03:58 -08002985 To compile this driver as a module, choose M here. The module
2986 will be called slip.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002987
2988config SLIP_COMPRESSED
2989 bool "CSLIP compressed headers"
2990 depends on SLIP
Ralf Baechleb6e37e52006-07-14 12:15:40 +01002991 select SLHC
Linus Torvalds1da177e2005-04-16 15:20:36 -07002992 ---help---
2993 This protocol is faster than SLIP because it uses compression on the
2994 TCP/IP headers (not on the data itself), but it has to be supported
2995 on both ends. Ask your access provider if you are not sure and
2996 answer Y, just in case. You will still be able to use plain SLIP. If
2997 you plan to use SLiRP, the SLIP emulator (available from
2998 <ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
2999 allows you to use SLIP over a regular dial up shell connection, you
3000 definitely want to say Y here. The NET-3-HOWTO, available from
3001 <http://www.tldp.org/docs.html#howto>, explains how to configure
3002 CSLIP. This won't enlarge your kernel.
3003
Ralf Baechleb6e37e52006-07-14 12:15:40 +01003004config SLHC
3005 tristate
3006 help
3007 This option enables Van Jacobsen serial line header compression
3008 routines.
3009
Linus Torvalds1da177e2005-04-16 15:20:36 -07003010config SLIP_SMART
3011 bool "Keepalive and linefill"
3012 depends on SLIP
3013 help
3014 Adds additional capabilities to the SLIP driver to support the
3015 RELCOM line fill and keepalive monitoring. Ideal on poor quality
3016 analogue lines.
3017
3018config SLIP_MODE_SLIP6
3019 bool "Six bit SLIP encapsulation"
3020 depends on SLIP
3021 help
3022 Just occasionally you may need to run IP over hostile serial
3023 networks that don't pass all control characters or are only seven
3024 bit. Saying Y here adds an extra mode you can use with SLIP:
3025 "slip6". In this mode, SLIP will only send normal ASCII symbols over
3026 the serial device. Naturally, this has to be supported at the other
3027 end of the link as well. It's good enough, for example, to run IP
3028 over the async ports of a Camtec JNT Pad. If unsure, say N.
3029
3030config NET_FC
3031 bool "Fibre Channel driver support"
Randy Dunlapcbcd2a42005-07-27 13:04:35 -07003032 depends on SCSI && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -07003033 help
3034 Fibre Channel is a high speed serial protocol mainly used to connect
3035 large storage devices to the computer; it is compatible with and
3036 intended to replace SCSI.
3037
3038 If you intend to use Fibre Channel, you need to have a Fibre channel
3039 adaptor card in your computer; say Y here and to the driver for your
3040 adaptor below. You also should have said Y to "SCSI support" and
3041 "SCSI generic support".
3042
Linus Torvalds1da177e2005-04-16 15:20:36 -07003043config NETCONSOLE
3044 tristate "Network console logging support (EXPERIMENTAL)"
Matt Mackall5e43db72005-07-27 15:24:42 -07003045 depends on EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -07003046 ---help---
3047 If you want to log kernel messages over the network, enable this.
3048 See <file:Documentation/networking/netconsole.txt> for details.
3049
Satyam Sharma0bcc1812007-08-10 15:35:05 -07003050config NETCONSOLE_DYNAMIC
3051 bool "Dynamic reconfiguration of logging targets (EXPERIMENTAL)"
3052 depends on NETCONSOLE && SYSFS && EXPERIMENTAL
3053 select CONFIGFS_FS
3054 help
3055 This option enables the ability to dynamically reconfigure target
3056 parameters (interface, IP addresses, port numbers, MAC addresses)
3057 at runtime through a userspace interface exported using configfs.
3058 See <file:Documentation/networking/netconsole.txt> for details.
3059
Randy Dunlap54208992005-07-18 13:45:12 -07003060config NETPOLL
3061 def_bool NETCONSOLE
3062
Randy Dunlap54208992005-07-18 13:45:12 -07003063config NETPOLL_TRAP
3064 bool "Netpoll traffic trapping"
3065 default n
3066 depends on NETPOLL
3067
3068config NET_POLL_CONTROLLER
3069 def_bool NETPOLL
3070
Rusty Russell296f96f2007-10-22 11:03:37 +10003071config VIRTIO_NET
3072 tristate "Virtio network driver (EXPERIMENTAL)"
3073 depends on EXPERIMENTAL && VIRTIO
3074 ---help---
Anthony Liguori0ad07ec2007-11-07 20:46:31 -06003075 This is the virtual network driver for virtio. It can be used with
3076 lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
Rusty Russell296f96f2007-10-22 11:03:37 +10003077
Jan Engelhardtd1c0a652007-06-13 12:48:53 -07003078endif # NETDEVICES