blob: 8518d9dfba5c40b24cd6980c4d9ca00c3377c6ca [file] [log] [blame]
Felipe Balbife851f52015-09-29 13:55:33 -05001/**
2 * timer-ti-32k.c - OMAP2 32k Timer Support
3 *
4 * Copyright (C) 2009 Nokia Corporation
5 *
6 * Update to use new clocksource/clockevent layers
7 * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
8 * Copyright (C) 2007 MontaVista Software, Inc.
9 *
10 * Original driver:
11 * Copyright (C) 2005 Nokia Corporation
12 * Author: Paul Mundt <paul.mundt@nokia.com>
13 * Juha Yrjölä <juha.yrjola@nokia.com>
14 * OMAP Dual-mode timer framework support by Timo Teras
15 *
16 * Some parts based off of TI's 24xx code:
17 *
18 * Copyright (C) 2004-2009 Texas Instruments, Inc.
19 *
20 * Roughly modelled after the OMAP1 MPU timer code.
21 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
22 *
23 * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com
24 *
25 * This program is free software: you can redistribute it and/or modify
26 * it under the terms of the GNU General Public License version 2 of
27 * the License as published by the Free Software Foundation.
28 *
29 * This program is distributed in the hope that it will be useful,
30 * but WITHOUT ANY WARRANTY; without even the implied warranty of
31 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
32 * GNU General Public License for more details.
33 *
34 * You should have received a copy of the GNU General Public License
35 * along with this program. If not, see <http://www.gnu.org/licenses/>.
36 */
37
38#include <linux/init.h>
39#include <linux/time.h>
40#include <linux/sched_clock.h>
41#include <linux/clocksource.h>
42#include <linux/of.h>
43#include <linux/of_address.h>
44
45/*
46 * 32KHz clocksource ... always available, on pretty most chips except
47 * OMAP 730 and 1510. Other timers could be used as clocksources, with
48 * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
49 * but systems won't necessarily want to spend resources that way.
50 */
51
52#define OMAP2_32KSYNCNT_REV_OFF 0x0
53#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
54#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10
55#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30
56
57struct ti_32k {
58 void __iomem *base;
59 void __iomem *counter;
60 struct clocksource cs;
61};
62
63static inline struct ti_32k *to_ti_32k(struct clocksource *cs)
64{
65 return container_of(cs, struct ti_32k, cs);
66}
67
68static cycle_t ti_32k_read_cycles(struct clocksource *cs)
69{
70 struct ti_32k *ti = to_ti_32k(cs);
71
72 return (cycle_t)readl_relaxed(ti->counter);
73}
74
75static struct ti_32k ti_32k_timer = {
76 .cs = {
77 .name = "32k_counter",
78 .rating = 250,
79 .read = ti_32k_read_cycles,
80 .mask = CLOCKSOURCE_MASK(32),
81 .flags = CLOCK_SOURCE_IS_CONTINUOUS |
82 CLOCK_SOURCE_SUSPEND_NONSTOP,
83 },
84};
85
86static u64 notrace omap_32k_read_sched_clock(void)
87{
88 return ti_32k_read_cycles(&ti_32k_timer.cs);
89}
90
91static void __init ti_32k_timer_init(struct device_node *np)
92{
93 int ret;
94
95 ti_32k_timer.base = of_iomap(np, 0);
96 if (!ti_32k_timer.base) {
97 pr_err("Can't ioremap 32k timer base\n");
98 return;
99 }
100
101 ti_32k_timer.counter = ti_32k_timer.base;
102
103 /*
104 * 32k sync Counter IP register offsets vary between the highlander
105 * version and the legacy ones.
106 *
107 * The 'SCHEME' bits(30-31) of the revision register is used to identify
108 * the version.
109 */
110 if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) &
111 OMAP2_32KSYNCNT_REV_SCHEME)
112 ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH;
113 else
114 ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
115
116 ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
117 if (ret) {
118 pr_err("32k_counter: can't register clocksource\n");
119 return;
120 }
121
122 sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
123 pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
124}
125CLOCKSOURCE_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
126 ti_32k_timer_init);