Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 1 | /* |
| 2 | * include/linux/phy.h |
| 3 | * |
| 4 | * Framework and drivers for configuring and reading different PHYs |
| 5 | * Based on code in sungem_phy.c and gianfar_phy.c |
| 6 | * |
| 7 | * Author: Andy Fleming |
| 8 | * |
| 9 | * Copyright (c) 2004 Freescale Semiconductor, Inc. |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or modify it |
| 12 | * under the terms of the GNU General Public License as published by the |
| 13 | * Free Software Foundation; either version 2 of the License, or (at your |
| 14 | * option) any later version. |
| 15 | * |
| 16 | */ |
| 17 | |
| 18 | #ifndef __PHY_H |
| 19 | #define __PHY_H |
| 20 | |
| 21 | #include <linux/spinlock.h> |
| 22 | #include <linux/device.h> |
Maciej W. Rozycki | 13df29f | 2006-10-03 16:18:28 +0100 | [diff] [blame] | 23 | #include <linux/ethtool.h> |
| 24 | #include <linux/mii.h> |
| 25 | #include <linux/timer.h> |
| 26 | #include <linux/workqueue.h> |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 27 | |
| 28 | #define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ |
| 29 | SUPPORTED_10baseT_Full | \ |
| 30 | SUPPORTED_100baseT_Half | \ |
| 31 | SUPPORTED_100baseT_Full | \ |
| 32 | SUPPORTED_Autoneg | \ |
| 33 | SUPPORTED_TP | \ |
| 34 | SUPPORTED_MII) |
| 35 | |
| 36 | #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ |
| 37 | SUPPORTED_1000baseT_Half | \ |
| 38 | SUPPORTED_1000baseT_Full) |
| 39 | |
| 40 | /* Set phydev->irq to PHY_POLL if interrupts are not supported, |
| 41 | * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if |
| 42 | * the attached driver handles the interrupt |
| 43 | */ |
| 44 | #define PHY_POLL -1 |
| 45 | #define PHY_IGNORE_INTERRUPT -2 |
| 46 | |
| 47 | #define PHY_HAS_INTERRUPT 0x00000001 |
| 48 | #define PHY_HAS_MAGICANEG 0x00000002 |
| 49 | |
Andy Fleming | e8a2b6a | 2006-12-01 12:01:06 -0600 | [diff] [blame] | 50 | /* Interface Mode definitions */ |
| 51 | typedef enum { |
| 52 | PHY_INTERFACE_MODE_MII, |
| 53 | PHY_INTERFACE_MODE_GMII, |
| 54 | PHY_INTERFACE_MODE_SGMII, |
| 55 | PHY_INTERFACE_MODE_TBI, |
| 56 | PHY_INTERFACE_MODE_RMII, |
| 57 | PHY_INTERFACE_MODE_RGMII, |
| 58 | PHY_INTERFACE_MODE_RTBI |
| 59 | } phy_interface_t; |
| 60 | |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 61 | #define MII_BUS_MAX 4 |
| 62 | |
| 63 | |
Andy Fleming | e8a2b6a | 2006-12-01 12:01:06 -0600 | [diff] [blame] | 64 | #define PHY_INIT_TIMEOUT 100000 |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 65 | #define PHY_STATE_TIME 1 |
| 66 | #define PHY_FORCE_TIMEOUT 10 |
| 67 | #define PHY_AN_TIMEOUT 10 |
| 68 | |
Andy Fleming | e8a2b6a | 2006-12-01 12:01:06 -0600 | [diff] [blame] | 69 | #define PHY_MAX_ADDR 32 |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 70 | |
Kumar Gala | a4d00f1 | 2006-01-11 11:27:33 -0800 | [diff] [blame] | 71 | /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ |
| 72 | #define PHY_ID_FMT "%x:%02x" |
| 73 | |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 74 | /* The Bus class for PHYs. Devices which provide access to |
| 75 | * PHYs should register using this structure */ |
| 76 | struct mii_bus { |
| 77 | const char *name; |
| 78 | int id; |
| 79 | void *priv; |
| 80 | int (*read)(struct mii_bus *bus, int phy_id, int regnum); |
| 81 | int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val); |
| 82 | int (*reset)(struct mii_bus *bus); |
| 83 | |
| 84 | /* A lock to ensure that only one thing can read/write |
| 85 | * the MDIO bus at a time */ |
| 86 | spinlock_t mdio_lock; |
| 87 | |
| 88 | struct device *dev; |
| 89 | |
| 90 | /* list of all PHYs on bus */ |
| 91 | struct phy_device *phy_map[PHY_MAX_ADDR]; |
| 92 | |
Matt Porter | f896424c | 2005-11-02 16:13:06 -0700 | [diff] [blame] | 93 | /* Phy addresses to be ignored when probing */ |
| 94 | u32 phy_mask; |
| 95 | |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 96 | /* Pointer to an array of interrupts, each PHY's |
| 97 | * interrupt at the index matching its address */ |
| 98 | int *irq; |
| 99 | }; |
| 100 | |
Andy Fleming | e8a2b6a | 2006-12-01 12:01:06 -0600 | [diff] [blame] | 101 | #define PHY_INTERRUPT_DISABLED 0x0 |
| 102 | #define PHY_INTERRUPT_ENABLED 0x80000000 |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 103 | |
| 104 | /* PHY state machine states: |
| 105 | * |
| 106 | * DOWN: PHY device and driver are not ready for anything. probe |
| 107 | * should be called if and only if the PHY is in this state, |
| 108 | * given that the PHY device exists. |
| 109 | * - PHY driver probe function will, depending on the PHY, set |
| 110 | * the state to STARTING or READY |
| 111 | * |
| 112 | * STARTING: PHY device is coming up, and the ethernet driver is |
| 113 | * not ready. PHY drivers may set this in the probe function. |
| 114 | * If they do, they are responsible for making sure the state is |
| 115 | * eventually set to indicate whether the PHY is UP or READY, |
| 116 | * depending on the state when the PHY is done starting up. |
| 117 | * - PHY driver will set the state to READY |
| 118 | * - start will set the state to PENDING |
| 119 | * |
| 120 | * READY: PHY is ready to send and receive packets, but the |
| 121 | * controller is not. By default, PHYs which do not implement |
| 122 | * probe will be set to this state by phy_probe(). If the PHY |
| 123 | * driver knows the PHY is ready, and the PHY state is STARTING, |
| 124 | * then it sets this STATE. |
| 125 | * - start will set the state to UP |
| 126 | * |
| 127 | * PENDING: PHY device is coming up, but the ethernet driver is |
| 128 | * ready. phy_start will set this state if the PHY state is |
| 129 | * STARTING. |
| 130 | * - PHY driver will set the state to UP when the PHY is ready |
| 131 | * |
| 132 | * UP: The PHY and attached device are ready to do work. |
| 133 | * Interrupts should be started here. |
| 134 | * - timer moves to AN |
| 135 | * |
| 136 | * AN: The PHY is currently negotiating the link state. Link is |
| 137 | * therefore down for now. phy_timer will set this state when it |
| 138 | * detects the state is UP. config_aneg will set this state |
| 139 | * whenever called with phydev->autoneg set to AUTONEG_ENABLE. |
| 140 | * - If autonegotiation finishes, but there's no link, it sets |
| 141 | * the state to NOLINK. |
| 142 | * - If aneg finishes with link, it sets the state to RUNNING, |
| 143 | * and calls adjust_link |
| 144 | * - If autonegotiation did not finish after an arbitrary amount |
| 145 | * of time, autonegotiation should be tried again if the PHY |
| 146 | * supports "magic" autonegotiation (back to AN) |
| 147 | * - If it didn't finish, and no magic_aneg, move to FORCING. |
| 148 | * |
| 149 | * NOLINK: PHY is up, but not currently plugged in. |
| 150 | * - If the timer notes that the link comes back, we move to RUNNING |
| 151 | * - config_aneg moves to AN |
| 152 | * - phy_stop moves to HALTED |
| 153 | * |
| 154 | * FORCING: PHY is being configured with forced settings |
| 155 | * - if link is up, move to RUNNING |
| 156 | * - If link is down, we drop to the next highest setting, and |
| 157 | * retry (FORCING) after a timeout |
| 158 | * - phy_stop moves to HALTED |
| 159 | * |
| 160 | * RUNNING: PHY is currently up, running, and possibly sending |
| 161 | * and/or receiving packets |
| 162 | * - timer will set CHANGELINK if we're polling (this ensures the |
| 163 | * link state is polled every other cycle of this state machine, |
| 164 | * which makes it every other second) |
| 165 | * - irq will set CHANGELINK |
| 166 | * - config_aneg will set AN |
| 167 | * - phy_stop moves to HALTED |
| 168 | * |
| 169 | * CHANGELINK: PHY experienced a change in link state |
| 170 | * - timer moves to RUNNING if link |
| 171 | * - timer moves to NOLINK if the link is down |
| 172 | * - phy_stop moves to HALTED |
| 173 | * |
| 174 | * HALTED: PHY is up, but no polling or interrupts are done. Or |
| 175 | * PHY is in an error state. |
| 176 | * |
| 177 | * - phy_start moves to RESUMING |
| 178 | * |
| 179 | * RESUMING: PHY was halted, but now wants to run again. |
| 180 | * - If we are forcing, or aneg is done, timer moves to RUNNING |
| 181 | * - If aneg is not done, timer moves to AN |
| 182 | * - phy_stop moves to HALTED |
| 183 | */ |
| 184 | enum phy_state { |
| 185 | PHY_DOWN=0, |
| 186 | PHY_STARTING, |
| 187 | PHY_READY, |
| 188 | PHY_PENDING, |
| 189 | PHY_UP, |
| 190 | PHY_AN, |
| 191 | PHY_RUNNING, |
| 192 | PHY_NOLINK, |
| 193 | PHY_FORCING, |
| 194 | PHY_CHANGELINK, |
| 195 | PHY_HALTED, |
| 196 | PHY_RESUMING |
| 197 | }; |
| 198 | |
| 199 | /* phy_device: An instance of a PHY |
| 200 | * |
| 201 | * drv: Pointer to the driver for this PHY instance |
| 202 | * bus: Pointer to the bus this PHY is on |
| 203 | * dev: driver model device structure for this PHY |
| 204 | * phy_id: UID for this device found during discovery |
| 205 | * state: state of the PHY for management purposes |
| 206 | * dev_flags: Device-specific flags used by the PHY driver. |
| 207 | * addr: Bus address of PHY |
| 208 | * link_timeout: The number of timer firings to wait before the |
| 209 | * giving up on the current attempt at acquiring a link |
| 210 | * irq: IRQ number of the PHY's interrupt (-1 if none) |
| 211 | * phy_timer: The timer for handling the state machine |
| 212 | * phy_queue: A work_queue for the interrupt |
| 213 | * attached_dev: The attached enet driver's device instance ptr |
| 214 | * adjust_link: Callback for the enet controller to respond to |
| 215 | * changes in the link state. |
| 216 | * adjust_state: Callback for the enet driver to respond to |
| 217 | * changes in the state machine. |
| 218 | * |
| 219 | * speed, duplex, pause, supported, advertising, and |
| 220 | * autoneg are used like in mii_if_info |
| 221 | * |
| 222 | * interrupts currently only supports enabled or disabled, |
| 223 | * but could be changed in the future to support enabling |
| 224 | * and disabling specific interrupts |
| 225 | * |
| 226 | * Contains some infrastructure for polling and interrupt |
| 227 | * handling, as well as handling shifts in PHY hardware state |
| 228 | */ |
| 229 | struct phy_device { |
| 230 | /* Information about the PHY type */ |
| 231 | /* And management functions */ |
| 232 | struct phy_driver *drv; |
| 233 | |
| 234 | struct mii_bus *bus; |
| 235 | |
| 236 | struct device dev; |
| 237 | |
| 238 | u32 phy_id; |
| 239 | |
| 240 | enum phy_state state; |
| 241 | |
| 242 | u32 dev_flags; |
| 243 | |
Andy Fleming | e8a2b6a | 2006-12-01 12:01:06 -0600 | [diff] [blame] | 244 | phy_interface_t interface; |
| 245 | |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 246 | /* Bus address of the PHY (0-32) */ |
| 247 | int addr; |
| 248 | |
| 249 | /* forced speed & duplex (no autoneg) |
| 250 | * partner speed & duplex & pause (autoneg) |
| 251 | */ |
| 252 | int speed; |
| 253 | int duplex; |
| 254 | int pause; |
| 255 | int asym_pause; |
| 256 | |
| 257 | /* The most recently read link state */ |
| 258 | int link; |
| 259 | |
| 260 | /* Enabled Interrupts */ |
| 261 | u32 interrupts; |
| 262 | |
| 263 | /* Union of PHY and Attached devices' supported modes */ |
| 264 | /* See mii.h for more info */ |
| 265 | u32 supported; |
| 266 | u32 advertising; |
| 267 | |
| 268 | int autoneg; |
| 269 | |
| 270 | int link_timeout; |
| 271 | |
| 272 | /* Interrupt number for this PHY |
| 273 | * -1 means no interrupt */ |
| 274 | int irq; |
| 275 | |
| 276 | /* private data pointer */ |
| 277 | /* For use by PHYs to maintain extra state */ |
| 278 | void *priv; |
| 279 | |
| 280 | /* Interrupt and Polling infrastructure */ |
| 281 | struct work_struct phy_queue; |
| 282 | struct timer_list phy_timer; |
| 283 | |
| 284 | spinlock_t lock; |
| 285 | |
| 286 | struct net_device *attached_dev; |
| 287 | |
| 288 | void (*adjust_link)(struct net_device *dev); |
| 289 | |
| 290 | void (*adjust_state)(struct net_device *dev); |
| 291 | }; |
| 292 | #define to_phy_device(d) container_of(d, struct phy_device, dev) |
| 293 | |
| 294 | /* struct phy_driver: Driver structure for a particular PHY type |
| 295 | * |
| 296 | * phy_id: The result of reading the UID registers of this PHY |
| 297 | * type, and ANDing them with the phy_id_mask. This driver |
| 298 | * only works for PHYs with IDs which match this field |
| 299 | * name: The friendly name of this PHY type |
| 300 | * phy_id_mask: Defines the important bits of the phy_id |
| 301 | * features: A list of features (speed, duplex, etc) supported |
| 302 | * by this PHY |
| 303 | * flags: A bitfield defining certain other features this PHY |
| 304 | * supports (like interrupts) |
| 305 | * |
| 306 | * The drivers must implement config_aneg and read_status. All |
| 307 | * other functions are optional. Note that none of these |
| 308 | * functions should be called from interrupt time. The goal is |
| 309 | * for the bus read/write functions to be able to block when the |
| 310 | * bus transaction is happening, and be freed up by an interrupt |
| 311 | * (The MPC85xx has this ability, though it is not currently |
| 312 | * supported in the driver). |
| 313 | */ |
| 314 | struct phy_driver { |
| 315 | u32 phy_id; |
| 316 | char *name; |
| 317 | unsigned int phy_id_mask; |
| 318 | u32 features; |
| 319 | u32 flags; |
| 320 | |
| 321 | /* Called to initialize the PHY, |
| 322 | * including after a reset */ |
| 323 | int (*config_init)(struct phy_device *phydev); |
| 324 | |
| 325 | /* Called during discovery. Used to set |
| 326 | * up device-specific structures, if any */ |
| 327 | int (*probe)(struct phy_device *phydev); |
| 328 | |
| 329 | /* PHY Power Management */ |
| 330 | int (*suspend)(struct phy_device *phydev); |
| 331 | int (*resume)(struct phy_device *phydev); |
| 332 | |
| 333 | /* Configures the advertisement and resets |
| 334 | * autonegotiation if phydev->autoneg is on, |
| 335 | * forces the speed to the current settings in phydev |
| 336 | * if phydev->autoneg is off */ |
| 337 | int (*config_aneg)(struct phy_device *phydev); |
| 338 | |
| 339 | /* Determines the negotiated speed and duplex */ |
| 340 | int (*read_status)(struct phy_device *phydev); |
| 341 | |
| 342 | /* Clears any pending interrupts */ |
| 343 | int (*ack_interrupt)(struct phy_device *phydev); |
| 344 | |
| 345 | /* Enables or disables interrupts */ |
| 346 | int (*config_intr)(struct phy_device *phydev); |
| 347 | |
| 348 | /* Clears up any memory if needed */ |
| 349 | void (*remove)(struct phy_device *phydev); |
| 350 | |
| 351 | struct device_driver driver; |
| 352 | }; |
| 353 | #define to_phy_driver(d) container_of(d, struct phy_driver, driver) |
| 354 | |
| 355 | int phy_read(struct phy_device *phydev, u16 regnum); |
| 356 | int phy_write(struct phy_device *phydev, u16 regnum, u16 val); |
| 357 | struct phy_device* get_phy_device(struct mii_bus *bus, int addr); |
| 358 | int phy_clear_interrupt(struct phy_device *phydev); |
| 359 | int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); |
Andy Fleming | e139345 | 2005-08-24 18:46:21 -0500 | [diff] [blame] | 360 | struct phy_device * phy_attach(struct net_device *dev, |
Andy Fleming | e8a2b6a | 2006-12-01 12:01:06 -0600 | [diff] [blame] | 361 | const char *phy_id, u32 flags, phy_interface_t interface); |
Andy Fleming | e139345 | 2005-08-24 18:46:21 -0500 | [diff] [blame] | 362 | struct phy_device * phy_connect(struct net_device *dev, const char *phy_id, |
Andy Fleming | e8a2b6a | 2006-12-01 12:01:06 -0600 | [diff] [blame] | 363 | void (*handler)(struct net_device *), u32 flags, |
| 364 | phy_interface_t interface); |
Andy Fleming | e139345 | 2005-08-24 18:46:21 -0500 | [diff] [blame] | 365 | void phy_disconnect(struct phy_device *phydev); |
| 366 | void phy_detach(struct phy_device *phydev); |
| 367 | void phy_start(struct phy_device *phydev); |
| 368 | void phy_stop(struct phy_device *phydev); |
| 369 | int phy_start_aneg(struct phy_device *phydev); |
| 370 | |
| 371 | int mdiobus_register(struct mii_bus *bus); |
| 372 | void mdiobus_unregister(struct mii_bus *bus); |
| 373 | void phy_sanitize_settings(struct phy_device *phydev); |
| 374 | int phy_stop_interrupts(struct phy_device *phydev); |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 375 | |
| 376 | static inline int phy_read_status(struct phy_device *phydev) { |
| 377 | return phydev->drv->read_status(phydev); |
| 378 | } |
| 379 | |
Andy Fleming | e139345 | 2005-08-24 18:46:21 -0500 | [diff] [blame] | 380 | int genphy_config_advert(struct phy_device *phydev); |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 381 | int genphy_setup_forced(struct phy_device *phydev); |
| 382 | int genphy_restart_aneg(struct phy_device *phydev); |
| 383 | int genphy_config_aneg(struct phy_device *phydev); |
| 384 | int genphy_update_link(struct phy_device *phydev); |
| 385 | int genphy_read_status(struct phy_device *phydev); |
| 386 | void phy_driver_unregister(struct phy_driver *drv); |
| 387 | int phy_driver_register(struct phy_driver *new_driver); |
| 388 | void phy_prepare_link(struct phy_device *phydev, |
| 389 | void (*adjust_link)(struct net_device *)); |
| 390 | void phy_start_machine(struct phy_device *phydev, |
| 391 | void (*handler)(struct net_device *)); |
| 392 | void phy_stop_machine(struct phy_device *phydev); |
| 393 | int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); |
| 394 | int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); |
| 395 | int phy_mii_ioctl(struct phy_device *phydev, |
| 396 | struct mii_ioctl_data *mii_data, int cmd); |
Andy Fleming | e139345 | 2005-08-24 18:46:21 -0500 | [diff] [blame] | 397 | int phy_start_interrupts(struct phy_device *phydev); |
| 398 | void phy_print_status(struct phy_device *phydev); |
Vitaly Bordug | 11b0bac | 2006-08-14 23:00:29 -0700 | [diff] [blame] | 399 | struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id); |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 400 | |
| 401 | extern struct bus_type mdio_bus_type; |
Andy Fleming | 00db818 | 2005-07-30 19:31:23 -0400 | [diff] [blame] | 402 | #endif /* __PHY_H */ |