blob: 7144e8aa1e41a1fb6187260362296214df4f0c10 [file] [log] [blame]
Steve Glendinningfd9abb32008-11-05 00:35:37 +00001/***************************************************************************
2 *
3 * Copyright (C) 2004-2008 SMSC
4 * Copyright (C) 2005-2008 ARM
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version 2
9 * of the License, or (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 *
20 ***************************************************************************/
21#ifndef __LINUX_SMSC911X_H__
22#define __LINUX_SMSC911X_H__
23
24#include <linux/phy.h>
25
26/* platform_device configuration data, should be assigned to
27 * the platform_device's dev.platform_data */
28struct smsc911x_platform_config {
29 unsigned int irq_polarity;
30 unsigned int irq_type;
Steve Glendinning2107fb82008-11-05 00:35:38 +000031 unsigned int flags;
Steve Glendinningfd9abb32008-11-05 00:35:37 +000032 phy_interface_t phy_interface;
Manuel Laussaace4952009-10-13 07:25:49 +000033 unsigned char mac[6];
Steve Glendinningfd9abb32008-11-05 00:35:37 +000034};
35
36/* Constants for platform_device irq polarity configuration */
37#define SMSC911X_IRQ_POLARITY_ACTIVE_LOW 0
38#define SMSC911X_IRQ_POLARITY_ACTIVE_HIGH 1
39
40/* Constants for platform_device irq type configuration */
41#define SMSC911X_IRQ_TYPE_OPEN_DRAIN 0
42#define SMSC911X_IRQ_TYPE_PUSH_PULL 1
43
Steve Glendinning2107fb82008-11-05 00:35:38 +000044/* Constants for flags */
45#define SMSC911X_USE_16BIT (BIT(0))
46#define SMSC911X_USE_32BIT (BIT(1))
Steve Glendinningd23f0282009-01-27 06:51:11 +000047#define SMSC911X_FORCE_INTERNAL_PHY (BIT(2))
48#define SMSC911X_FORCE_EXTERNAL_PHY (BIT(3))
Steve Glendinning31f45742009-01-27 06:51:12 +000049#define SMSC911X_SAVE_MAC_ADDRESS (BIT(4))
Steve Glendinning2107fb82008-11-05 00:35:38 +000050
Magnus Damm833cc672009-04-27 21:32:16 +000051/*
52 * SMSC911X_SWAP_FIFO:
53 * Enables software byte swap for fifo data. Should only be used as a
54 * "last resort" in the case of big endian mode on boards with incorrectly
55 * routed data bus to older devices such as LAN9118. Newer devices such as
56 * LAN9221 can handle this in hardware, there are registers to control
57 * this swapping but the driver doesn't currently use them.
58 */
59#define SMSC911X_SWAP_FIFO (BIT(5))
60
Steve Glendinningfd9abb32008-11-05 00:35:37 +000061#endif /* __LINUX_SMSC911X_H__ */