Justin Waters | 226d16c | 2016-02-19 18:35:28 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2015 Timesys Corporation. |
| 3 | * Copyright 2015 General Electric Company |
| 4 | * |
| 5 | * This file is dual-licensed: you can use it either under the terms |
| 6 | * of the GPL or the X11 license, at your option. Note that this dual |
| 7 | * licensing only applies to this file, and not this project as a |
| 8 | * whole. |
| 9 | * |
| 10 | * a) This file is free software; you can redistribute it and/or |
| 11 | * modify it under the terms of the GNU General Public License |
| 12 | * version 2 as published by the Free Software Foundation. |
| 13 | * |
| 14 | * This file is distributed in the hope that it will be useful |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * Or, alternatively |
| 20 | * |
| 21 | * b) Permission is hereby granted, free of charge, to any person |
| 22 | * obtaining a copy of this software and associated documentation |
| 23 | * files (the "Software"), to deal in the Software without |
| 24 | * restriction, including without limitation the rights to use |
| 25 | * copy, modify, merge, publish, distribute, sublicense, and/or |
| 26 | * sell copies of the Software, and to permit persons to whom the |
| 27 | * Software is furnished to do so, subject to the following |
| 28 | * conditions: |
| 29 | * |
| 30 | * The above copyright notice and this permission notice shall be |
| 31 | * included in all copies or substantial portions of the Software. |
| 32 | * |
| 33 | * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND |
| 34 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 35 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 36 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 37 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY |
| 38 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 39 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 40 | * OTHER DEALINGS IN THE SOFTWARE. |
| 41 | */ |
| 42 | |
| 43 | #include "imx6q-ba16.dtsi" |
| 44 | |
| 45 | / { |
| 46 | clocks { |
| 47 | mclk: clock@0 { |
| 48 | compatible = "fixed-clock"; |
| 49 | reg = <0>; |
| 50 | #clock-cells = <0>; |
| 51 | clock-frequency = <22000000>; |
| 52 | }; |
| 53 | }; |
| 54 | |
Ken Lin | fe4b467 | 2016-06-22 10:25:56 -0400 | [diff] [blame] | 55 | gpio-poweroff { |
| 56 | compatible = "gpio-poweroff"; |
| 57 | gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; |
| 58 | status = "okay"; |
| 59 | }; |
| 60 | |
Justin Waters | 226d16c | 2016-02-19 18:35:28 -0500 | [diff] [blame] | 61 | reg_wl18xx_vmmc: regulator-wl18xx { |
| 62 | compatible = "regulator-fixed"; |
| 63 | regulator-name = "vwl1807"; |
| 64 | regulator-min-microvolt = <3300000>; |
| 65 | regulator-max-microvolt = <3300000>; |
| 66 | gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>; |
| 67 | startup-delay-us = <70000>; |
| 68 | enable-active-high; |
| 69 | }; |
| 70 | |
| 71 | reg_wlan: regulator-wlan { |
| 72 | compatible = "regulator-fixed"; |
| 73 | regulator-name = "3P3V_wlan"; |
| 74 | regulator-min-microvolt = <3300000>; |
| 75 | regulator-max-microvolt = <3300000>; |
| 76 | regulator-always-on; |
| 77 | regulator-boot-on; |
| 78 | gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>; |
| 79 | }; |
| 80 | |
| 81 | sound { |
| 82 | compatible = "fsl,imx6q-ba16-sgtl5000", |
| 83 | "fsl,imx-audio-sgtl5000"; |
| 84 | model = "imx6q-ba16-sgtl5000"; |
| 85 | ssi-controller = <&ssi1>; |
| 86 | audio-codec = <&sgtl5000>; |
| 87 | audio-routing = |
| 88 | "MIC_IN", "Mic Jack", |
| 89 | "Mic Jack", "Mic Bias", |
| 90 | "LINE_IN", "Line In Jack", |
| 91 | "Headphone Jack", "HP_OUT"; |
| 92 | mux-int-port = <1>; |
| 93 | mux-ext-port = <4>; |
| 94 | }; |
| 95 | }; |
| 96 | |
| 97 | &ecspi5 { |
| 98 | fsl,spi-num-chipselects = <1>; |
| 99 | cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; |
| 100 | pinctrl-names = "default"; |
| 101 | pinctrl-0 = <&pinctrl_ecspi5>; |
| 102 | status = "okay"; |
| 103 | |
| 104 | m25_eeprom: m25p80@0 { |
| 105 | compatible = "atmel,at25"; |
| 106 | spi-max-frequency = <20000000>; |
| 107 | size = <0x8000>; |
| 108 | pagesize = <64>; |
| 109 | reg = <0>; |
| 110 | address-width = <16>; |
| 111 | }; |
| 112 | }; |
| 113 | |
| 114 | &i2c1 { |
| 115 | pca9547: mux@70 { |
| 116 | compatible = "nxp,pca9547"; |
| 117 | reg = <0x70>; |
| 118 | #address-cells = <1>; |
| 119 | #size-cells = <0>; |
| 120 | |
| 121 | mux1_i2c1: i2c@0 { |
| 122 | #address-cells = <1>; |
| 123 | #size-cells = <0>; |
| 124 | reg = <0x0>; |
| 125 | |
| 126 | ads7830: ads7830@48 { |
| 127 | compatible = "ti,ads7830"; |
| 128 | reg = <0x48>; |
| 129 | }; |
| 130 | |
| 131 | mma8453: mma8453@1c { |
| 132 | compatible = "fsl,mma8453"; |
| 133 | reg = <0x1c>; |
| 134 | }; |
| 135 | }; |
| 136 | |
| 137 | mux1_i2c2: i2c@1 { |
| 138 | #address-cells = <1>; |
| 139 | #size-cells = <0>; |
| 140 | reg = <0x1>; |
| 141 | |
| 142 | eeprom: eeprom@50 { |
| 143 | compatible = "atmel,24c08"; |
| 144 | reg = <0x50>; |
| 145 | }; |
| 146 | |
| 147 | mpl3115: mpl3115@60 { |
| 148 | compatible = "fsl,mpl3115"; |
| 149 | reg = <0x60>; |
| 150 | }; |
| 151 | }; |
| 152 | |
| 153 | mux1_i2c3: i2c@2 { |
| 154 | #address-cells = <1>; |
| 155 | #size-cells = <0>; |
| 156 | reg = <0x2>; |
| 157 | }; |
| 158 | |
| 159 | mux1_i2c4: i2c@3 { |
| 160 | #address-cells = <1>; |
| 161 | #size-cells = <0>; |
| 162 | reg = <0x3>; |
| 163 | |
| 164 | sgtl5000: codec@0a { |
| 165 | compatible = "fsl,sgtl5000"; |
| 166 | reg = <0x0a>; |
| 167 | clocks = <&mclk>; |
| 168 | VDDA-supply = <®_1p8v>; |
| 169 | VDDIO-supply = <®_3p3v>; |
| 170 | }; |
| 171 | }; |
| 172 | |
| 173 | mux1_i2c5: i2c@4 { |
| 174 | #address-cells = <1>; |
| 175 | #size-cells = <0>; |
| 176 | reg = <0x4>; |
| 177 | |
| 178 | pca9539: pca9539@74 { |
| 179 | compatible = "nxp,pca9539"; |
| 180 | reg = <0x74>; |
| 181 | gpio-controller; |
| 182 | #gpio-cells = <2>; |
| 183 | interrupt-controller; |
| 184 | interrupt-parent = <&gpio2>; |
| 185 | interrupts = <3 IRQ_TYPE_LEVEL_LOW>; |
| 186 | }; |
| 187 | }; |
| 188 | |
| 189 | mux1_i2c6: i2c@5 { |
| 190 | #address-cells = <1>; |
| 191 | #size-cells = <0>; |
| 192 | reg = <0x5>; |
| 193 | }; |
| 194 | |
| 195 | mux1_i2c7: i2c@6 { |
| 196 | #address-cells = <1>; |
| 197 | #size-cells = <0>; |
| 198 | reg = <0x6>; |
| 199 | }; |
| 200 | |
| 201 | mux1_i2c8: i2c@7 { |
| 202 | #address-cells = <1>; |
| 203 | #size-cells = <0>; |
| 204 | reg = <0x7>; |
| 205 | }; |
| 206 | }; |
| 207 | }; |
| 208 | |
| 209 | &usdhc4 { |
| 210 | pinctrl-names = "default"; |
| 211 | pinctrl-0 = <&pinctrl_usdhc4>; |
| 212 | bus-width = <4>; |
| 213 | vmmc-supply = <®_wl18xx_vmmc>; |
| 214 | no-1-8-v; |
| 215 | non-removable; |
| 216 | wakeup-source; |
| 217 | keep-power-in-suspend; |
| 218 | cap-power-off-card; |
| 219 | max-frequency = <25000000>; |
| 220 | #address-cells = <1>; |
| 221 | #size-cells = <0>; |
| 222 | status = "okay"; |
| 223 | |
| 224 | wlcore: wlcore@2 { |
| 225 | compatible = "ti,wl1837"; |
| 226 | reg = <2>; |
| 227 | interrupt-parent = <&gpio2>; |
| 228 | interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; |
| 229 | tcxo-clock-frequency = <26000000>; |
| 230 | }; |
| 231 | }; |